Search Results

Search found 5744 results on 230 pages for 'power cords'.

Page 158/230 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• Canon MG6100 series USB Printer not mounting

  - by user35201

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• Is there any way to kill a zombie process without reboot?

  - by Pedram

  Is there any way to kill a zombie process without reboot?Here is how it happens: I wanted to download a 12GB torrent.After adding the .torrent file, transmission turned into a zombie process.I tried ktorrent too.Same behavior.Finally I could download the file using µTorrent but after closing the program, it turns into a zombie as well. I tried using kill skill and pkill with different options and -9 signal but no success. In some answers in web I found out killing the parent can kill the zombie, but killing wine didn't help either. Is there another way? Edit: ps -o pid,ppid,stat,comm PID PPID STAT COMMAND 7121 2692 Ss bash 7317 7121 R+ ps pstree output: init---GoogleTalkPlugi---4*[{GoogleTalkPlug}] +-NetworkManager---dhclient ¦ +-{NetworkManager} +-acpid +-apache2---5*[apache2] +-atd +-avahi-daemon---avahi-daemon +-bonobo-activati---{bonobo-activat} +-clock-applet +-console-kit-dae---63*[{console-kit-da}] +-cron +-cupsd +-2*[dbus-daemon] +-2*[dbus-launch] +-desktopcouch-se---desktopcouch-se +-explorer.exe +-firefox---run-mozilla.sh---firefox-bin---plugin-containe---8*[{plugin-contain}] ¦ +-14*[{firefox-bin}] +-gconfd-2 +-gdm-binary---gdm-simple-slav---Xorg ¦ ¦ +-gdm-session-wor---gnome-session---bluetooth-apple ¦ ¦ ¦ ¦ +-fusion-icon---compiz---sh---gtk-window-deco ¦ ¦ ¦ ¦ +-gdu-notificatio ¦ ¦ ¦ ¦ +-gnome-panel ¦ ¦ ¦ ¦ +-gnome-power-man ¦ ¦ ¦ ¦ +-gpg-agent ¦ ¦ ¦ ¦ +-nautilus---bash ¦ ¦ ¦ ¦ ¦ +-{nautilus} ¦ ¦ ¦ ¦ +-nm-applet ¦ ¦ ¦ ¦ +-polkit-gnome-au ¦ ¦ ¦ ¦ +-2*[python] ¦ ¦ ¦ ¦ +-qstardict---{qstardict} ¦ ¦ ¦ ¦ +-ssh-agent ¦ ¦ ¦ ¦ +-tracker-applet ¦ ¦ ¦ ¦ +-trackerd ¦ ¦ ¦ ¦ +-wakoopa---wakoopa ¦ ¦ ¦ ¦ ¦ +-3*[{wakoopa}] ¦ ¦ ¦ ¦ +-{gnome-session} ¦ ¦ ¦ +-{gdm-session-wo} ¦ ¦ +-{gdm-simple-sla} ¦ +-{gdm-binary} +-6*[getty] +-gnome-keyring-d---2*[{gnome-keyring-}] +-gnome-screensav +-gnome-settings- +-gnome-system-mo---{gnome-system-m} +-gnome-terminal---bash---ssh ¦ +-bash---pstree ¦ +-gnome-pty-helpe ¦ +-{gnome-terminal} +-gvfs-afc-volume---{gvfs-afc-volum} +-gvfs-fuse-daemo---3*[{gvfs-fuse-daem}] +-gvfs-gdu-volume +-gvfsd +-gvfsd-burn +-gvfsd-http +-gvfsd-metadata +-gvfsd-trash +-hald---hald-runner---hald-addon-acpi ¦ ¦ +-hald-addon-cpuf ¦ ¦ +-hald-addon-inpu ¦ ¦ +-hald-addon-stor ¦ +-{hald} +-hotot---xdg-open ¦ +-3*[{hotot}] +-indicator-apple +-indicator-me-se +-indicator-sessi +-irqbalance +-kded4 +-kdeinit4---kio_http_cache_ ¦ +-klauncher +-kglobalaccel +-knotify4 +-modem-manager +-multiload-apple +-mysqld---10*[{mysqld}] +-named---10*[{named}] +-nmbd +-notification-ar +-notify-osd +-pidgin---{pidgin} +-polkitd +-pulseaudio---gconf-helper ¦ +-2*[{pulseaudio}] +-rsyslogd---2*[{rsyslogd}] +-rtkit-daemon---2*[{rtkit-daemon}] +-services.exe---plugplay.exe---2*[{plugplay.exe}] ¦ +-winedevice.exe---3*[{winedevice.exe}] ¦ +-3*[{services.exe}] +-smbd---smbd +-snmpd +-sshd +-timidity +-trashapplet +-udevd---2*[udevd] +-udisks-daemon---udisks-daemon ¦ +-{udisks-daemon} +-upowerd +-upstart-udev-br +-utorrent.exe---8*[winemenubuilder] ¦ +-{utorrent.exe} +-vnstatd +-winbindd---2*[winbindd] +-2*[winemenubuilder] +-wineserver +-wnck-applet +-wpa_supplicant +-xinetd System monitor and top screenshots which show the zombie process is using resources:

  Read the article

• Newly installed Ubuntu 12.10 and weird graphics

  - by Benji Marshall

  My machine: 2 GB RAM Intel Pentium Dual core E2180 @ 2 GHz NVIDIA GeForce 6200 LE My friend had recommended Ubuntu to me and I thought I might as well get used to Linux in anticipation for my Raspberry Pi. He said that Wubi was the easiest way to install and I installed it using Wubi. On my first ever boot up of Ubuntu from the Windows Bootloader started normally, and I logged on in a normal fashion, and my desktop loaded normally. I then pressed the Windows key/Power key and everything went wrong. Random lines of yellow and blue appeared on my screen, and changed location when I moved my mouse. The lines stayed for a few seconds and then partially went to I could sort of use my computer. I tried moving my mouse and the entire desktop looked like it broke apart, fragments of it just scatter across my screen at random angles. I could move my mouse and the pointer would move but clicking did nothing. I had to turn off my machine by removing the plug. I would love to get off Windows, but at least the doesn't completely mess up the graphics, and is relatively usable. Please help me solve this....

  Read the article

• There's A Virtual Developer Day in Your Future

  - by OTN ArchBeat

  What are Virtual Developer Days? You really should know this by now. OTN Virtual Developer Days are online events created specifically for developers and architects, with a focus on no-fluff technical presentations, hands-on labs, and expert Q&A to sharpen your technical skills and bring you up to speed on the latest information on Oracle products and practical best practices for their use. The best part about OTN Virtual Developer Days is that you don't have to pack a suitcase or stand in line at an airport waiting for someone pat you down. Instead, you stay where you are, flip open your laptop, and prepare your brain for a massive skills injection. In the next few weeks you'll have two such chances to ramp up your skills. On Tuesday November 5, 2013 Harnessing the Power of Oracle WebLogic and Oracle Coherence will guide you through tooling updates and best practices for developing applications with WebLogic and Coherence as target platforms. This two-track event covers app design and development (Track 1) and building, deploying, and managing applications (Track 2). Each track includes three presentations plus a hands-on lab. [9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT] Register now This event will also be available in EMEA on December 3, 2013 {9am-1pm GMT / 1pm-5pm GST / 2:30pm-6:30 PM IST] On Tuesday November 19, 2103 Oracle ADF Development: Web, Mobile, and Beyond offers four tracks covering everything from the basics to advance skills for for application development using Oracle ADF and Oracle ADF Mobile. There are three sessions in each track, followed by hands-on labs in which try out what you've learned. [9am-1pm PT / 12pm-4pm ET/ 1pm-5pm BRT] Register now This event will also be available in APAC on Thursday November 21, 2013 [10am-1:30pm IST (India) / 12:30pm-4pm SGT (Singapore) / 3:30pm-7pm AESDT] and in EMEA on Tuesday November 26, 2013 [9am-1pm GMT / 1pm-5pm GST/ 2:30pm-6:30pm IST] Registration for both events is absolutely free. So what are you waiting for?

  Read the article

• Grub menu will not show the first time I try to boot my ubuntu server 12.04 after it is shutdown for a long time

  - by user211477

  I am running into a booting issue after installing Ubuntu Server 12.04 LTS. Following is the symptom of the problem. SYSTEM DESCRIPTION: Dual core AMD Athlon 64 3 Disks: two SATA (out of which one is SSD) and one PATA. Using LVM for disk partition management. /boot is not under LVM rest of the partitions are. / is on the SSD BIOS boot sequence is correct and points to the disk with /boot and boot loader is installed on this disk. SYMPTOMS: POST messages Blinking cursor on first line then moves to second line Screen flickers then becomes black Everything is unresponsive, hard reboot POST messages will not show up on screen. Monitor displays powersave message Force shutdown machine again. Shutoff power to machine for a few minutes. Restart machine. POST message show up. Grub menu shows up Ubuntu server 12.04 boots normally. From now on Ubuntu server boots normally until machine is shutdown for a long time (for example, 30 mins) Repeat steps 1 through 13 once the machine is started after a long time. WHAT DID I TRY? I read several posts and have tried: radeon.modeset=0 setting the gfxmode edd=0 nolacpi boot-repair Nothing seems to work. In my search I did see only one post with this same symptom. Unfortunately, I am not being able to locate that post anymore. The interesting fact is that with this same machine configuration, if I install Ubuntu Desktop 12.04 then everything works fine. Any help will be appreciated.

  Read the article

• Unable to start lightdm but can startx

  - by wzyboy

  I am trying to make my own Live USB and I have successfully generated an ISO file with a newly installed, configured and customized Xubuntu 12.04 LTS installation. My problem is that, no matter I boot the ISO in VirtualBox or in GRUB with loopback, it just cannot start the lightdm. When booting, I can see the log messages on the screen, it stucks at Stopping System V compablities or Configuring Network security. And tty7 is frozen... If I switch to tty1, I can get a logged-in shell as ubuntu@ubuntu. The weird thing is: When I type sudo start lightdm or just sudo lightdm, it will switch to tty7 and the screen flashes. Then nothing happened. Return to tty1 and I can see lightdm running, process xxxx. But the process does not exist. It was just crashed immediately I think. (That's why the screen flashes.) However, when I type startx, I can get into the desktop! That's amazing for me. I am not very clear about the relationship between X Server and Display Manager, but I think lightdm is running when I see the desktop! Then, what's wrong with sudo start lightdm? I use this command every time I power on my laptop since I have a text parameter added in grub.cfg. It never "crashed immediately". I need to use sudo start lightdm because it gets me into "Xubuntu Session" instead of "Xfce Session", the prior is more beautiful... Could anyone help?

  Read the article

• SharePoint Saturday DC 2010 Slides, Demo Scripts, and Pictures

  - by Brian Jackett

  Wow! This past weekend I attended SharePoint Saturday Washington DC (SPSDC) which was quite an event to say the least.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my fifth SharePoint Saturday attended and fourth I’ve spoken at.  SPSDC was a bit different than most SharePoint Saturdays mostly due to the scale of it.  We had almost 950 attendees, over 80 speakers presenting close to 90 sessions, and dozens of sponsors.  A big thanks goes out to the organizers of this event.  They put in a lot of hard work and time to pull this event off and should be very proud of the end result.      For SPSDC I presented “The Power of PowerShell + SharePoint 2007”.  I want to thank all of the attendees of my session for coming and asking some great questions.  Below you can find the slides and demo scripts for this session.  I also took some photos throughout the day (not as many as usual since so much going on) so check them out.  If you have any follow up questions feel free to drop me a line in the comments or the contact link at the top of the site.   Slides and Scripts Click here for the demo scripts and slides posted on my SkyDrive. VERY IMPORTANT NOTE: One thing I forgot to mention in my presentation.  In order to run code against the SharePoint API you need to load the Microsoft.SharePoint.dll assembly first.  Run the below command on the PowerShell console line to complete that:   [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") Photos Facebook album -or- My album on Windows Live site (higher res shots). View Full Album         -Frog Out

  Read the article

• How do I prevent my filesystems from being mounted read-only after suspending?

  - by Chas. Owens

  I have Ubuntu 12.04 installed on an SDHC card (only one ext2 partition, no swap). When I suspend using pm-suspend, my root filesystem is mounted read-only. I am currently "fixing" this with the following file: /etc/pm/sleep.d/99_make_disk_rw: #!/bin/sh mount -o remount,rw / But the disk is marked as needing an fsck on reboot. How can I prevent the filesystem from being mounted read-only or whatever is going wrong here. Update: It looks like it is getting mounted read-only because an error occurred. I have changed the mount options for / in /etc/fstab to noatime,nodiratime,errors=continue and it no longer mounts the SDHC card as read-only after it resumes. So the problem is happening when it suspends, not when it resumes as I had thought. I checked /sys/bus/usb/devices/1-4/power/persist and it is set to 1. So the SDHC card shouldn't appear disconnected to the OS (or more accurately it should recover from the disconnection without error). Here seems to be the relevant section of the syslog Sep 10 10:34:23 iubit kernel: [ 748.246226] sd 4:0:0:0: [sdb] Media Changed Sep 10 10:34:23 iubit kernel: [ 748.246234] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Sep 10 10:34:23 iubit kernel: [ 748.246243] sd 4:0:0:0: [sdb] Sense Key : Unit Attention [current] Sep 10 10:34:23 iubit kernel: [ 748.246253] Info fld=0x0 Sep 10 10:34:23 iubit kernel: [ 748.246258] sd 4:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed Sep 10 10:34:23 iubit kernel: [ 748.246271] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 5d 3e f0 00 00 08 00 Sep 10 10:34:23 iubit kernel: [ 748.246291] end_request: I/O error, dev sdb, sector 6110960 Sep 10 10:34:23 iubit kernel: [ 748.247027] EXT2-fs (sdb1): error: ext2_fsync: detected IO error when writing metadata buffers Sep 10 10:34:23 iubit anacron[6954]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:23 iubit anacron[6954]: Normal exit (0 jobs run) Sep 10 10:34:24 iubit laptop-mode: Laptop mode Sep 10 10:34:24 iubit laptop-mode: enabled, not active Sep 10 10:34:24 iubit kernel: [ 749.055376] sd 4:0:0:0: [sdb] No Caching mode page present Sep 10 10:34:24 iubit kernel: [ 749.055387] sd 4:0:0:0: [sdb] Assuming drive cache: write through Sep 10 10:34:25 iubit anacron[7555]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:25 iubit anacron[7555]: Normal exit (0 jobs run) Sep 10 10:34:31 iubit kernel: [ 756.090861] EXT2-fs (sdb1): previous I/O error to superblock detected

  Read the article

• Need Guidance Making HTML5 Canvas Game Engine

  - by Scriptonaut

  So I have some free time this winter break and want to build a simple 2d HTML5 canvas game engine. Mostly a physics engine that will dictate the way objects move and interact(collisions, etc). I made a basic game here: http://caidenhome.com/HTML%205/pong.html and would like to make more, and thought that this would be a good reason to make a simple framework for this stuff. Here are some questions: Does the scripting language have to be Javascript? What about Ruby? I will probably write it with jQuery because of the selecting powers, but I'm curious either way. Are there any great guides you guys know of? I want a fast guide that will help me bust out this engine sometime in the next 2 weeks, hopefully sooner. What are some good conventions I should be aware of? What's the best way to get sound? At the moment I'm using something like this: var audioElement = document.createElement('audio'); audioElement.setAttribute('src', 'paddle_col.wav'); audioElement.load(); I'm interested in making this engine lightweight and extremely efficient, I will do whatever it takes to get great speeds and processing power. I know this question is fairly vague, but I just need a push in the right direction. Thanks :)

  Read the article

• Read-only lock on a SharePoint site collection, or Why can't I edit anymore?

  - by PeterBrunone

  Monday morning, the calls started.  For some reason, long-time users were unable to edit list items.  I figured we had a permissions issue, so I popped in to look at the Site Settings -- and found that I couldn't.  A quick trip to Central Administration showed that I was still listed as a Site Collection Administrator, but I had no power at all on the site collection in question.A quick glance at the logs told me that the server had recently shut down unexpectedly (this is a Hyper-V virtual machine).  Apparently, in the confusion, somehow SharePoint decided to lock the site collection as Read Only.  This can be remedied in one of two ways:1)  In Central Administration, go to Application Management->SharePoint Site Management->Site collection quotas and locks.  Once you have arrived, select the correct application and site collection, and you will have the opportunity to view and set the lock status of the collection (it most likely will be set to "Read-only", and you'll want to move that radio button to "Not locked").2)  Fire up stsadm and issue the following command:stsadm -o setsitelock -url http://myportalsitecollection -lock none

  Read the article

• MMORPG design for time-limited players

  - by Philipp

  I believe that there is a significant market of players who would enjoy the exploration and interaction aspects of MMORPGs, but simply don't have the time for the endless grinding marathons which are part of the average MMORPG. MMORPGs are all about interaction between players. But when different players have different amounts of time to invest into a game, those with less time to spend will soon lack behind their power-leveling friends and won't be able to interact with them anymore. One way to solve this would be to limit the progress a player can achieve per day, so that it simply doesn't make sense to play more than one or two hours a day. But even the busiest casual players sometimes like to spend a whole sunday afternoon playing a video game. Just stopping them after two hours would be really frustrating. It also creates a pressure to use the daily progress limit every day, because otherwise the player would feel like wasting something. This pressure would be detrimental for casual gamers. What else could be done to level the playing field between those players who play 40+ hours a week and those who can't play more than 10?

  Read the article

• Disabling shutdown command for all users, even root - consequences?

  - by Rich

  I would like to disable the shutdown command for all users, even root, on an Ubuntu Server installation. The reason I want to do this is to ensure that I don't get into the habit of shutting down the machine in this way, as I SSH into a lot of production machines at the same time as this one, and I don't want to accidentally shutdown one of the other machines by typing the command into the wrong window. The server I want do disable shutdown on only runs inside VirtualBox on my Windows desktop, and I only use it for local testing so it is not a problem if I can't shut it down from the command line. I have already mitigated the problem a bit by ensuring I have a different password on the VirtualBox image, but obviously if I am within the sudo 'window' on one of the production machines, I could still accidentally shut it down. My questions are: How do I disable the shutdown command? If I do disable the shutdown command, are there any consequences that I should be made aware of? Most specifically, will it disable support for ACPI shutdown that is the equivalent of pressing the power button on a physical machine? Could it affect other generic applications? For information, I just use this VirtualBox image for trying out shell scripts, running Tomcat and Java, and that kind of thing.

  Read the article

• fix vmware workstation 9 installation in ubuntu 12.10

  - by Alessandro Belloni

  i have opened this thread because i upgraded to ubuntu 12.10 beta (kernel 3.5) and i have problem with vmware workstation 9: "Unable to change virtual machine power state: Cannot find a valid peer process to connect to" does anyone got the same problem? Clean install of ubuntu 12.10 (daily build) installed vmware 9 and patched but not working, my laptop is a Lenovo T420 with Nvidia Optimus Technology. i can't patch correctly and get the thinks be builded correctly, my configuration is ubuntu 12.10 fresh installation vmware workstation 9 fresh install on top of a lenovo thikpad t420 with nvidia optimus video card. have a problems.. this message is show whem i try to apply the patch.. # Stopping VMware services: VMware Authentication Daemon done At least one instance of VMware VMX is still running. Please stop all running instances of VMware VMX first. VMware Authentication Daemon done Unable to stop services # How can i stop the vmware services to apply the patch? This message is too show when i try to patch again # ./patch-modules_3.5.0.sh /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting # But the vmware is not working, and i can’t unstall…

  Read the article

• Alienware M17x R3: Possible downclock

  - by Ywen

  I installed recently Kubuntu 11.10 32 bits (had graphics driver issues, wanted to try on 32 bits version) on my new Alienware M17x, with a Core i7-2670QM CPU. Cores are supposed to be clocked at 2.2 GHz, however the output of $ cat /proc/cpuinfo | grep -i "hz" gives me: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 If useful, the AC adapter is plugged in (yet the ouput is the same when the computer is powered only by the battery) and I have Firefox and Eclipse running. Does /proc/cpuinfo reflect a possible automatic downclock made to save power if processor load is low or is this output abnormal? EDIT: Ok, I checked and yes, the ouput does vary in function of the load. I reach 2.2 GHz when needed. But my following problem remains. I was checking my CPU clocking because I experienced poor performances when reading 720p video files on Ubuntu with VLC or mplayer when on battery (and I believe VLC by default only uses CPU, not GPU to decode), whereas I haven't got such problems with VLC on Windows (which made me think it wasn't coming from a BIOS option, plus every option in the BIOS regarding the CPU is turned ON).

  Read the article

• How do I fix a garbled screen on a Gateway LT3103u?

  - by paracaudex

  I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

  Read the article

• Did something just get borked with glibc/perl/irssi?

  - by Wayne Werner

  I was using irssi about 30 minutes ago now on Ubuntu server 12.04. Everything was perfectly fine and then all of the sudden something happened (my guess is a power failure). The box was restarted. When I logged back in and ran irssi, I got the following: *** glibc detected *** irssi: double free or corruption (out): 0x0000000002085a40 *** ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x7e626)[0x7ffc01d87626] irssi(config_node_set_str+0x98)[0x491768] irssi[0x491f12] irssi[0x491e61] irssi(config_parse+0x52)[0x492112] irssi[0x48ab81] irssi(settings_init+0xd1)[0x48bf81] irssi(core_init+0x79)[0x47a849] irssi(main+0xd8)[0x4167e8] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed)[0x7ffc01d2a76d] irssi[0x416b41] ======= Memory map: ======== 00400000-004d0000 r-xp 00000000 08:01 1319015 /usr/bin/irssi 006cf000-006d0000 r--p 000cf000 08:01 1319015 /usr/bin/irssi 006d0000-006dc000 rw-p 000d0000 08:01 1319015 /usr/bin/irssi 006dc000-006dd000 rw-p 00000000 00:00 0 02078000-02099000 rw-p 00000000 00:00 0 [heap] 7ffc0025b000-7ffc00270000 r-xp 00000000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00270000-7ffc0046f000 ---p 00015000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc0046f000-7ffc00470000 r--p 00014000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00470000-7ffc00471000 rw-p 00015000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00471000-7ffc0073a000 r--p 00000000 08:01 1320172 /usr/lib/locale/locale-archive 7ffc0073a000-7ffc00746000 r-xp 00000000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00746000-7ffc00945000 ---p 0000c000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00945000-7ffc00946000 r--p 0000b000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00946000-7ffc00947000 rw-p 0000c000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00947000-7ffc00951000 r-xp 00000000 08:01 655392 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7ffc00951000-7ffc00b51000 ---p 0000a000 08:01 655392 /lib/x86_64-linux-gnu/libnss_nis-2.15.so Followed by many more lines. Is there anything I can do to fix this?

  Read the article

• HP Notebook Pavilion g6-2101sl freeze

  - by StErMi

  I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

  Read the article

• Python in Finance by Yuxing Yan, Packt Publishing Book Review

  - by Compudicted

  Originally posted on: http://geekswithblogs.net/Compudicted/archive/2014/06/04/python-in-finance-by-yuxing-yan-packt-publishing-book-review.aspx I picked Python in Finance from Packt Publishing to review expecting to bore myself with complex algorithms and senseless formulas while seeing little actual Python in action, indeed at 400 pages plus it may seem so. But, it turned out to be quite the opposite. I learned a lot about practical implementations of various Python modules as SciPy, NumPy and several more, I think they empower a developer a lot. No wonder Python is on the track to become a de-facto scientist language of choice! But I am not going to compromise the truth, the book does discuss numerous financial terms, many of them, and this is where the enormous power of this book is coming from: it is like standing on the shoulders of a giant. Python is that giant - flexible and powerful, yet very approachable. The TOC is very detailed thanks to Packt, any one can see what financial algorithms are covered, I am only going to name a few which I had most fun with (though all of them are covered in enough details): Fama*, Fat Tail, ARCH, Monte-Carlo and of course the volatility smile! I am under an impression this book is best suited for students in Finance, especially those who are about to join the workforce, but I suspect the material in this book is very well suited for mature Financists, an investor who has some programming skills and wants to benefit from it, or even a programmer, or a mathematician who already knows Python or any other language, but wants to have fun in Quantitative Finance and earn a few buck! Pure fun, real results, tons of practical insight from reading data from a file to downloading trade data from Yahoo! Lastly, I need to complement Yuxing – he is a talented teacher, this book could not be what it is otherwise. It is a 5 out of 5 product. Disclaimer: I received a  free copy of this book for review purposes from the publisher.

  Read the article

• Very Cool &ndash; Miami 311 System for tracking citizen service requests (Windows Azure, Silverlight

  - by Jim Duffy

  Having grown up in South Florida this short, but very enlightening, video explaining how the City of Miami has implemented a 311 citizen service request system using Windows Azure, Silverlight and Bing Maps definitely caught my attention. Miami311 The Miami311 System is a Windows Azure/Silverlight-based solution which enables City of Miami citizens report and track issues reported to city management. The system uses Bing Maps to plot the location and relevant information about each issue reported. Citizens now have the ability to easily see the status of the issue without having to call the city office. What I found interesting were a couple of benefits that a metropolitan area such as Miami can take advantage of in Windows Azure cloud-based solution. For the city of Miami, both benefits center around the weather. Of course the threat of a hurricane is a real issue in South Florida and what better way to make sure your site stays up during a hurricane then to have the site hosted far away from the eye of the storm. Using a Windows Azure cloud-based architecture the City of Miami is able to host the application within the Microsoft data centers safely away from any hurricane passing through South Florida. The second benefit is the inherent scalability of a Windows Azure based solution. During a severe weather event like thunderstorms or even worse, a hurricane, downed trees and power lines are a commonly reported problem. Being able to quickly scale up the computing resources required to handle the spike in citizens reporting these types of problems on the site is a huge benefit. Once the weather event has passed and downed tree reports begin to subside they can quickly reverse the process and scale the system back down to pre-storm levels. It’s kind of day-to-day kind of stuff but very cool stuff nonetheless. Have a day. :-|

  Read the article

• Setting jQuery after ASP.net AJAX partial post back

  - by Steve Clements

  OK, so for some reason you have a mega mashup solution with ASP.net AJAX, jQuery and web forms.  Perhaps you are just on the migration from AjaxControlToolkit to the jQuery UI framework – who knows!! Anyway, the problem is that when you post back with something like an UpdatePanel, you will find that your nicely setup jQuery stuff, like the datepicker for example will no longer work. You may have something like this… $(document).ready(function () {     $(".date-edit").datepicker({ dateFormat: "dd/mm/yy", firstDay: 1, showOtherMonths: true, selectOtherMonths: true }); });   When you’re ASP.net UpdatePanel post back, you will find that your datepicker has gone.  Bugger! Well you need to add this little gem to set it back up again once the UpdatePanel comes back to the page. var prm = Sys.WebForms.PageRequestManager.getInstance(); prm.add_endRequest(function () {     $(".date-edit").datepicker({ dateFormat: "dd/mm/yy", firstDay: 1, showOtherMonths: true, selectOtherMonths: true }); });   Or like me, you would have a javascript function, something like InitPage(); do all your work in there and call that on document.ready and endRequest. Your choice…you have the power   Share this post :

  Read the article

• Introduction to the ADF Debugger

  - by Shay Shmeltzer

  Not that you'll ever need this blog entry - after all there are never bugs in the code that YOU write. But maybe one day one of your peers will ask you for help debugging their ADF application so here we go... One of the cool features of JDeveloper and ADF is the ADF Debugger - a way to debug the declarative pars of Oracle ADF. The debugger goes beyond your regular Java debugger and shows you in a clear way specific information related to Oracle ADF - things like where are you in the taskflow/region hierarchy, what is in your various scopes, what is the value of a specific EL and much more. However, from the number of posts on OTN where people are saying "I placed a System.out.println() to see what the value was...", it seems that not many are familiar with the power of the debugger. So here is a short demo that shows you some aspects of the debugger such as: Setting breakpoints on various ADF artifacts The ADF structure window The ADF Data window The EL Evaluater window Want to learn more about debugging ADF applications - I highly recommend that you go back in time to 2009 and attend Steve Muench's OOW presentation about ADF debugging. Can't travel in time yet? Then the second best option is to look at his very clear ADF Debugging Slides, which were the inspiration to the above demo.

  Read the article

• What is the best way to check if there is overlap between player and static, non-collidable items in bullet physic engine

  - by tigrou

  I'd like to add non collidable objects (eg: power ups, items, ...) in a game world using Bullet Physics Engine and to know if there is collision between player and them. Some info : there is a lot of items ( 1000), all are box shapes and they don't overlap. Here is things i have tried : btDbvt* bvtItems = new btDbvt(); //btDbvt is a hierachical AABB tree, used by Bullet foreach(var item ...) { btDbvtVolume volume = ... //compute item AABB; bvtItems->insert(volume, (void*)someExtraData); } Then, to find collisions between items and player : playerRigidBody->getAabb(min, max); btDbvtVolume playervolume = ... //compute player AABB bvtItems->collideTV(bvtItems->m_root, playervolume, *someCollisionHandler); This works fairly well (and its very fast), however, there is a problem : it only check items AABB against player AABB. That loss of precision is acceptable for items but not for player which is not a box. It would actually need another check to make sure player really collide with item but i don't know how to do this in Bullet. It would have been nice to have a function like this : playerRigidBody->checkCollisionWithAABB(); After doing trying that, I discovered that a btGhostObject exist and seems to have been made for that. I changed my code like this : foreach(var item...) { btCollisionObject* ghostObject = new btGhostObject(); ghostObject->setCollisionShape(boxShape); ghostObject->setCollisionFlags(ghostObject->getCollisionFlags() | btCollisionObject::CF_NO_CONTACT_RESPONSE); startTransform.setOrigin(...); //item position ghostObject->setWorldTransform(startTransform); dynamicsWorld->addCollisionObject(ghostObject, btBroadphaseProxy::SensorTrigger, btBroadphaseProxy:: CharacterFilter); } It also works ok, but there is a huge fps drop (almost ten times slower) which is not acceptable. Maybe there is something missing (forget set a flag) and Bullet is doing extra job for nothing or maybe all that ghostObjects are polluting broad phase and ghostObject is not the right thing for that. Any help would be appreciated.

  Read the article

• How do I start Ubuntu without X server?

  - by Kaare Mikkelsen

  So, I'm trying to install the official nVidia drivers for my fancy graphics card, and they advice disabling the X server before installing, as well as making sure that I can boot without the X server, so as not to wreck anything. However, I seem to be doing something wrong. As I understand it, this should be as simple as changing the runlevel from 2 to 1? (I am aware that all this may simply be me not understanding runlevels) If that is correct, a quick test should be simply typing "sudo init 1" or "sudo telinit 1" in a terminal? Doing that makes the system attempt to shutdown, only it stops at the purple screen with the ubuntu logo and 5 white dots underneath. I haven't observed it get anywhere from there, I always end up holding down the power button. "sudo telinit 3" has not visible effect. Alternatively, I should be able to get there using the recovery mode, activated through the grub menu? I have very little success with that. After picking recovery mode, I am faced with a set of options about how to proceed. Both choosing the one with "network enabled" and "text only", I get a dialog explaining that this will mount my / file system in read/write mode, and whether this is what I want. I choose yes, and it seems to report that my drive is fine (there's a single line of text detailing the state of the partition). And then it stops. I haven't tried letting it sit for more than a few minutes, but presumably this process should be comparable in duration to a regular boot? I am not particularly fond of messing with any .conf-files until I am certain that I can handle things with training wheels on. So, I guess there are two questions: the one in the title, and "how do I start a text-only session without changing defaults?" Thanks in advance :)

  Read the article

• Canon MG6100 series USB printer receives job but doesn't physically print

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

  - by nightfly

  I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >