Search Results

Search found 18079 results on 724 pages for 'compiler options'.

Page 159/724 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• Can't install Ubuntu in Windows 8

  - by user171635

  I’ve been trying to install Ubuntu 13.04 64-bit edition on an ASUS (K53Z) laptop. I have Windows 8 64-bit installed in a non UEFI mode (I think since it starts-up with the Windows logo and I don’t have the UEFI settings). This laptop had installed Windows 7 and when I upgraded it I didn’t knew about the UEFI advantages. I tried several times to install Ubuntu from a USB device and it loads the logo and then I can’t go further in the installation. I thought it was the version of Ubuntu and tried to install Fedora (even if I personally prefer Ubuntu). I had the same problem: Fedora’s logo appears and it gets stuck. I tried also to boot from different USB devices and didn’t work either. My Bios has EFI options to boot but they were not enabled. So I tried to enable them to boot the USB in UEFI mode. A menu shows up with the options of install Ubuntu and try Ubuntu. If I click the Install or try option, I get a black screen and I can’t go further with the install (which I think is normal since I don’t have Windows 8 in EFI mode). My hypothesis is that the Bios isn’t letting Ubuntu write or read from my SSD, because the activity LED in the USB memory is on when it’s loading the installation files. Once the files are ready and the Ubuntu logo is loaded I don’t see a LED activity on neither the SSD or the USB. Thanks If I missed data you can ask me.

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

  - by thatidiotguy

  So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

  Read the article

• PuTTY: how to properly emulate -t option

  - by John Sonderson

  On Linux the ssh command has a -t option whose man page reads: Force pseudo-tty allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services. Multiple -t options force tty allocate, even if ssh has no local tty. I would like to use this same option with PuTTY on Windows. In particular, I can see that PuTTY has a bunch of options under: Category - Connection - SSH - TTY and suspect it might be possible to achieve the same behavior via some of the (NUMEROUS!) settings found on this screen. Anyone know how to configure the following command: ssh -t USER,[email protected] create Thanks!

  Read the article

• How to add entries to combobox in Word XP

  - by Kris C

  I'm trying to follow the following instructions to add a combobox to a form and add some values to it for the user to pick: http://office.microsoft.com/en-gb/help/create-forms-that-users-complete-in-word-HP005230270.aspx I've created a .dot and then dragged a combobox onto the document. When I double-click on it though, it opens up the VBA editor. Do I have to add the items programatically as per the following question How do I add a combobox in Word? or is it possible to do this using the UI? The other question/answer refers to creating a form. Is there a step I've missed between creating a .dot to then create a form somehow before adding form elements to it? Right clicking gives the following menu options: Cut Copy Paste properties View code Combo Box Object - Edit or Convert Format Control Hyperlink Choosing edit allows me to type some text onto the visible part of the control, but doesn't allow me to add multiple options Right-clicking and selecting properties opens the following:

  Read the article

• Unable to print A6 on Canon LBP 2900B php

  - by ????? ???

  I am working on web application. In which I have to print an invoice on A6 paper. To better control priniting I used TCPDF. In TCPDF options I have setup it to print A6. Now my TCPDF is working fine. But there is problem in printing it on Canon LBP2900B. As there is no option available to print A6 page. When I try to print on it. It used A4 paper to print it. I have also checked Custom options in Canon. But unable to figure out how to print it using Canon printer.

  Read the article

• Using Bulk Operations with Coherence Off-Heap Storage

  - by jpurdy

  Some NamedCache methods (including clear(), entrySet(Filter), aggregate(Filter, …), invoke(Filter, …)) may generate large intermediate results. The size of these intermediate results may result in out-of-memory exceptions on cache servers, and in some cases on cache clients. This may be particularly problematic if out-of-memory exceptions occur on more than one server (since these operations may be cluster-wide) or if these exceptions cause additional memory use on the surviving servers as they take over partitions from the failed servers. This may be particularly problematic with clusters that use off-heap storage (such as NIO or Elastic Data storage options), since these storage options allow greater than normal cache sizes but do nothing to address the size of intermediate results or final result sets. One workaround is to use a PartitionedFilter, which allows the application to break up a larger operation into a number of smaller operations, each targeting either a set of partitions (useful for reducing the load on each cache server) or a set of members (useful for managing client result set sizes). It is also possible to return a key set, and then pull in the full entries using that key set. This also allows the application to take advantage of near caching, though this may be of limited value if the result is large enough to result in near cache thrashing.

  Read the article

• Visual Studio 2013 now available!

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/17/visual-studio-2013-now-available.aspxVisual Studio 2013 is now available for download! I will attach the beginning of their web page announcement. You should note that web projects may now be readily a combination of Web Forms, MVC and Web API.We are excited to announce that Visual Studio 2013 is now available to you as an MSDN subscriber! For developers and development teams, Visual Studio 2013 easily delivers applications across all Microsoft devices, cloud, desktop, server and game console platforms by providing a consistent development experience, hybrid collaboration options, and state-of-the-art tools, services, and resources. Below are just a few of the highlights in this release:   •   Innovative features for greater developer productivity:Visual Studio 2013 includes many user interface improvements; there are more than 400 modified icons with greater differentiation and increased use of color, a redesigned Start page, and other design changes.  •   Support for Windows 8.1 app development: Visual Studio 2013 provides the ideal toolset for building modern applications that leverage the next wave in Windows platform innovation (Windows 8.1), while supporting devices and services across all Microsoft platforms. Support for Windows Store app development in Windows 8.1 includes updates to the tools, controls and templates, new Coded UI test support for XAML apps, UI Responsiveness Analyzer and Energy Consumption profiler for XAML & HTML apps, enhanced memory profiling tools for HTML apps, and improved integration with the Windows Store.  •   Web development advances: Creating websites or services on the Microsoft platform provides you with many options, including ASP.NET WebForms, ASP.NET MVC, WCF or Web API services, and more. Previously, working with each of these approaches meant working with separate project types and tooling isolated to that project’s capabilities. The One ASP.NET vision unifies your web project experience in Visual Studio 2013 so that you can create ASP.NET web applications using your preference of ASP.NET component frameworks in a single project. Now you can mix and match the right tools for the job within your web projects, giving you increased flexibility and productivity.

  Read the article

• The long road to bug-free software

  - by Tony Davis

  The past decade has seen a burgeoning interest in functional programming languages such as Haskell or, in the Microsoft world, F#. Though still on the periphery of mainstream programming, functional programming concepts are gradually seeping into the imperative C# language (for example, Lambda expressions have their root in functional programming). One of the more interesting concepts from functional programming languages is the use of formal methods, the lofty ideal behind which is bug-free software. The idea is that we write a specification that describes exactly how our function (say) should behave. We then prove that our function conforms to it, and in doing so have proved beyond any doubt that it is free from bugs. All programmers already use one form of specification, specifically their programming language's type system. If a value has a specific type then, in a type-safe language, the compiler guarantees that value cannot be an instance of a different type. Many extensions to existing type systems, such as generics in Java and .NET, extend the range of programs that can be type-checked. Unfortunately, type systems can only prevent some bugs. To take a classic problem of retrieving an index value from an array, since the type system doesn't specify the length of the array, the compiler has no way of knowing that a request for the "value of index 4" from an array of only two elements is "unsafe". We restore safety via exception handling, but the ideal type system will prevent us from doing anything that is unsafe in the first place and this is where we start to borrow ideas from a language such as Haskell, with its concept of "dependent types". If the type of an array includes its length, we can ensure that any index accesses into the array are valid. The problem is that we now need to carry around the length of arrays and the values of indices throughout our code so that it can be type-checked. In general, writing the specification to prove a positive property, even for a problem very amenable to specification, such as a simple sorting algorithm, turns out to be very hard and the specification will be different for every program. Extend this to writing a specification for, say, Microsoft Word and we can see that the specification would end up being no simpler, and therefore no less buggy, than the implementation. Fortunately, it is easier to write a specification that proves that a program doesn't have certain, specific and undesirable properties, such as infinite loops or accesses to the wrong bit of memory. If we can write the specifications to prove that a program is immune to such problems, we could reuse them in many places. The problem is the lack of specification "provers" that can do this without a lot of manual intervention (i.e. hints from the programmer). All this might feel a very long way off, but computing power and our understanding of the theory of "provers" advances quickly, and Microsoft is doing some of it already. Via their Terminator research project they have started to prove that their device drivers will always terminate, and in so doing have suddenly eliminated a vast range of possible bugs. This is a huge step forward from saying, "we've tested it lots and it seems fine". What do you think? What might be good targets for specification and verification? SQL could be one: the cost of a bug in SQL Server is quite high given how many important systems rely on it, so there's a good incentive to eliminate bugs, even at high initial cost. [Many thanks to Mike Williamson for guidance and useful conversations during the writing of this piece] Cheers, Tony.

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• How can I re-create Microsoft Cluster Service resource groups on a different cluster?

  - by PersonalNexus

  I use Microsoft Cluster Service on a cluster of Windows Server 2003 machines containing several dozen resource groups. In the process of migrating to newer hardware, I would like move resources to the new machines on resource group at a time spread out over a few days to ease the migration and minimize risk. I was wondering of there was a smarter way to do this than manually re-creating resources on the new and then deleting them on the old cluster? The cluster has already been set up properly, the only missing is the resource groups and the resources they contain (IP, network names, services...). I have looked through the options of the cluster admin GUI and cluster.exe's commandline options, but haven't found anything like an import/export feature to copy over the configuration of a resource or entire resource group. Does something like this exist?

  Read the article

• how to congest a link using iperf

  - by navaz

  I have setup like below. Switch1-------------------- Switch2 | | | | | | | | | | | | PC1 PC2 PC3 PC4 I have a video traffic is flowing between PC1 and PC4. I have configured PC2 as iperf server. ( iperf -s ) and PC3 as client . (iperf -c 10.10.10.2 -P 20 -t 10000) where 10.10.10.2 is PC2 IP. now I am seeing most of the traffic in a link (switch1---switch2) is iperf. (TCP). I have observed from the logs that 1 out of 300 packet is UDP. Still I am not seeing any difference in the quality of video streaming in PC4. It looks similar compared to the case with no iperf. I am checking QOS, I have tried many options with iperf, couldnt succeed. I want to diminish the quality of video streaming in PC4. Could you please tell me what options can be used along with iperf to do it. Bandwidth between Switch1---switch2 is 1Gbits/sec. Thanks in advance

  Read the article

• Out of nowhere, ssh_exchange_identification: Connection closed by remote host

  - by disusered

  I am running Ubuntu 10.10 on a remote box. I ssh to it everyday without issues but today out of the blue, I get the following error: ssh_exchange_identification: Connection closed by remote host If I connect with -vv, I get the following: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/bla/.ssh/config debug1: Applying options for ubuntu-server debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ubuntu-server.com [123.123.123.123] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/bla/.ssh/id_rsa type -1 debug1: identity file /Users/bla/.ssh/id_rsa-cert type -1 ssh_exchange_identification: Connection closed by remote host If I remove the key, I get the exact same output (sans "debug2: key_type_...). I've managed to log in physically and checked my hosts.allow and hosts.deny but they have no entries. I tried removing and reinstalling OpenSSH, checked authorized_keys and ~/.ssh permissions and tried connecting from other computers only to get the same error. I'm at my wits end, any help would be greatly appreciated.

  Read the article

• 2 virtual domains: one on port 80 one on port 8080, how?

  - by Simone

  I've been struggling with this, basically what I want is this: A virtual domain to run on the 80 another virtual domain to run FROM 80 TO 8080 what I've done so far is trying different combinations with apache, but all i got is having all the virtual domains pointing to port 80 this is my conf: <VirtualHost domain1.com:80> DocumentRoot /var/www/domain1 <Directory "/var/www/domain1"> allow from all Options +Indexes </Directory> ServerName domain1.com </VirtualHost> <VirtualHost server.domain2.com:80> DocumentRoot /var/www <Directory "/var/www"> allow from all Options +Indexes </Directory> ServerName server.domain2.com ServerAlias www.server.domain2.com ProxyPass / http://server.domain2.com:8080/ </VirtualHost> suggestions? :(

  Read the article

• Enable [command] key to register as something other than just [ctrl]?

  - by gojomo

  I'm running 10.04LTS inside VMWare Fusion on a Mac. The [command] key (aka [windows] on many keyboards) is almost always behaving as if it was [ctrl], even though I done anything explicit to request that behavior. In fact, in SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior, 'default' is chosen (rather than the 'Control is mapped to Win keys' option). However, choosing other options there do not seem to change the handling of [command], at least not as tested in the SystemPreferenceKeyboard Shortcuts app. (No matter what I've tried, [command]-x is always detected as [Ctrl]-x in that app.) I've tried: various options under SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior toggling the VMWare Fusion Preferences KKeyboard & Mouse Key Mappings setup which claims to map '[command]' to '[windows]', and restarting the VM in each position the xmodmap lines suggested at https://help.ubuntu.com/community/MappingWindowsKey And yet, it's clear that all Ubuntu apps aren't merging [ctrl] and [command], because in 'Terminal', [shift]-[ctrl]-c will Copy, but [shift]-[command]-c will not. If the [command]/[windows] key was recognized as anything else ('Super', 'Meta', 'Hyper'? I don't care as long as it's not 'Control'), then I could achieve my real goal (which happens to be enabling CMD-based cut/copy/paste in PyCharm, while leaving CTRL-X/etc available for emacs-like bindings). I think any solution which manages to make [command]-x appear as something other than [ctrl]-x in PreferencesKeyboard Shortcuts will probably do the trick.

  Read the article

• Exclude hidden files when searching with Unix/Linux find?

  - by therefromhere

  What options do I need to use with find to exclude hidden files?

  Read the article

• Black Screen on Startup even after running chkdsk

  - by phwd

  I started an old (Dell Inspiron 2200) the startup goes all the way to Microsoft Windows XP Logo then I get a black screen. I am still able to move the cursor but that is about it. I tried running Recovery console (from CD) with chkdsk command. First time it said they were errors. I decided to do a fixboot and see if the errors went away. They did. Restarted and still no luck. If there are commands that I can call either from recovery console or elsewhere to further describe the problem please tell me and I will re-edit the question. srvtag:7XNSG81 Also what are my full range of options before wiping the hard-drive (if that is even the problem) I want to exhaust all options before replacing hardware.

  Read the article

• iPhone VPN to iTunes Home Sharing [migrated]

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• Extract X11 configuration information from running instance.

  - by kasterma

  Since I had a hard disk die on me, I figured I could easily try some other OS (I usually run Ubuntu). Turns out that Ubuntu flawlessly recognizes my video card and monitor (X11 works right out of the box), and none of the other systems I tried gets anything working (I tried CentOS and FreeBSD). In my now working version of Ubuntu I cannot find a configuration file with information I could try to use with one of the other versions, which makes me guess that it just detects the hardware every time. Can I extract its choice for drivers and configuration options somehow (so I can try these same options in the other systems)?

  Read the article

• In Outlook 2010, can you add "Categories" to the "New Email" Ribbon?

  - by Jeff

  I couldn't figure out how to do this in Outlook 2007, and I was hoping I could do it in Outlook 2010... I want the ability to quickly apply a category when composing a new email (typically a "Waiting For..." category) for things that need a response. It is possible to apply a category by clicking the "Options" ribbon, then the little arrow under the More Options section - but why can't I get the nice big "Categories" drop-down that's available in the "Tags" section of the main Outlook window. There are about a kabillion commands in the "Customize Ribbon" dialog box for the New Mail window, but I couldn't find anything about Categories. Should I just give up?

  Read the article

• How to force "Windows Explorer" to open new folders in the same window

  - by yoshiserry

  I have been searching for an answer to this question for a very long time. I have checked the "open folders in the same window" radio button in the general tab of folder options. I have also been told to uncheck the launch as seperate processes button in the view tab of folder options. I'm thinking some how this must be a registry issue. Anyone know a registry hack that will fix this problem and force windows explorer to open folders in the same window. I'm sick to death of having so many windows open. Im running Windows 7 Ultimate Beta 7100.

  Read the article

• How to prevent computer from automatically sleeping and/or hibernating?

  - by mehaase

  I'm running Ubuntu 12.04, and my laptop* won't wake from sleep/suspend/hibernate. (Is sleep the same thing as suspend?) I'm not even sure which of these things it's doing. When I am done working for the day, I lock my screen (Control-Alt-L). When I come back the next day, the screen is in power saving mode, and no amount of typing or clicking (on the usb keyboard/mouse or the builtin keyboard/trackpad) nor tapping the power button will bring it back to life. The only way I can get my machine to work is to hold down the power button until it shuts off, then press the power button again to turn it back on. Obviously, anything I had open from the previous day is pretty much gone -- in particular, my VMs all get rudely shut down without any warning. This is driving me INSANE. I spend the first hour of every work day trying to figure out how to get my computer to stop locking up over night. What I've tried: Editing the org.freedesktop.upower.policy to disable suspend and hibernate. Setting power management options in "Power" section of "System Settings". Looking at all power management options in the BIOS (none appear to be relevant to sleep/suspend/hibernate). Reading every forum post/askubuntu post that I can find that's even tangentially related to the subject. My question: how to disable the automatic sleep and/or hibernate (and/or anything similar) in Ubuntu 12.04. I don't care if it's still possible to sleep/suspend/hibernate/whatever by pushing buttons or running some command or reciting led zeppelin lyrics backwards. I just want my laptop to be ready for work in the morning. *The laptop is a Dell Latitude something or other. I don't want to get too specific because I've seen a lot of similar questions get closed for being too specific. I think my question is generic enough to stand -- it's a question about the latest, stable version of Ubuntu.

  Read the article

• How can I see when the txt file was embedded to a word document?

  - by nono

  Is there a possibility to search when the embedded txt file was created in the word document? I'm working in Word 2010 and the extension of the document is simple: .doc It was inserted using the Word options: Insert -> Object -> Create from file -> Insert as icon Thank you, I already tried the right click and properties option, but the problem with it, that it shows only the current date for all of the 3 options (created/modified/accessed). I also tried to get the timestamp but it is inactive when I'm on the txt object. Sorry not to mention it before: Thank you all of you here for the help and support it is really appreciated.

  Read the article

• Cannot Copy Pictures w/ text or w/o from web pages anymore word in office starter 2010

  - by Mindy Billings

  This is something new. I had been able to copy text and pictures from websites into a microsoft word office starter 2010. I have gone into advanced settings to no avail. I have verified that under paste special html is selected. I have reviewed the help sections and questions and they all tell me to select html under paste special but again it isn't working either. Also I used to have 3 formatting options under paste and am now only having two options. I did have a problem with my computer last night and I am wondering if something re-set itself..will you help?

  Read the article

• Prevent specific applications from being run as administrator

  - by Unsigned

  Background Most installation toolkits have the ability to launch, automatically or otherwise, external programs after installation. This is often appears in the installer via such options as "Show readme", or "Start program". Issue The problem is, many of these installers are poorly coded, and do not drop permissions appropriately. For example, starting the application automatically, or opening the application's homepage in the browser, often results in launching the application or browser with the installer's Administrative privileges, or a "High" UAC integrity level! This has the potential to open up security breaches, by opening up the installed application, or a web page (and possibly browser add-ons), that are now running with elevated permissions. (This is the reason I strongly recommend never choosing auto-launch options when installing software.) Question The question is: Is there a way to prevent certain applications (such as a web browser) from ever being launched with Administrative privileges, i.e., an automatic drop-privilege?

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >