Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 159/235 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

  • PHP Connection Strings

    - by Campo
    I have setup mirroring on my MSSQL server it is an automatic fail over. Lets say the SQL server goes down. I have found connection strings to reconnect the site to the mirror database for MSSQL 2008 Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Provider=SQLNCLI10;Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Driver={SQL Server Native Client 10.0};Server=myServerAddress;Failover_Partner=myMirrorServerAddress;Database=myDataBase; Trusted_Connection=yes; Is there something similar I can use for PHP to do the same sort of thing. This way if only the database goes down the site instantly fails over to the mirror database as soon as it is online. Thoughts/Suggestions/Comments All appreciated. I checked connectionstring.com but did not find a section for PHP

    Read the article

  • Backup Exec 12.5 or 2010? [closed]

    - by Chris Thorpe
    Backup Exec 2010 has just dropped, and I'm about to implement a new BEWS infrastructure, complete with CALs and new central servers. When I specced this up last year, I ignored 2010 and focused on Backup Exec 12.5, since it's a mature product. In previous experience, major released of BE had numerous technical issues and seemed to improve significantly at the first service pack. However, our refresh cycle on the backup infrastructure is slow, the main driver usually being lack of support for some new server type (in this case, ESX has driven our current upgrade need). With this in mind, I'm wondering if Backup Exec 2010 should be my first choice, as it'll last longer under current support than 12.5, which will approach EOL soon. Has anyone got any perspective they could add to this? Right now, I'm leaning towards biting the bullet and going with 2010.

    Read the article

  • USB to HDMI using just a cable

    - by Nirmal
    I got a cable which has a USB point on one side and an HDMI point on the other side. I was under an impression that I could watch movies from my computer if I connect my computer to the TV using this cable. But looks like I was wrong. Does anyone know if such cable need some driver to make it work? Thanks for any input. (My computer is a Dell All-in-one PC which cannot take an extra graphic card. That's why I am trying my luck with such a cable.)

    Read the article

  • Serve up PC hard drive as USB mass storage

    - by sheepsimulator
    Is there a software package available that can serve up a hard-drive internal to a PC and make it available over USB to other USB Master nodes as mass storage? Ex: take your C: or /dev/hda drive on a PC (let's call the computer PC-A), and run a driver program which makes your C: or /dev/hda drive available to external devices as USB mass storage. When you'd hook up another PC (PC-B) to PC-A via USB, it would detect a USB mass storage device, which is C: or /dev/hda on PC-A. Is this even possible? EDIT: I know that there are other ways of making data on a drive available between two different computers (eg. putting PC-A's hdd in a USB-drive-enclosure, or having PC-A make the hdd available via a network share). But I'd like to know if the method that I describe above is even technically possible.

    Read the article

  • 3ware RAID in Windows 7

    - by user36484
    Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

    Read the article

  • Access losing db connections

    - by Dwight T
    I have a weird problem going on at work. People have been using MS Access to connect to sql server db and lately people are getting sporadic problems with connecting to the servers. It's not always the same users and it's not always a problem, which makes it a real pain to try to solve. One example of a related problem. A person has a linked table to a table and she would filter the table or write a query on the table to return where itemsku = 'ABCD1234'. It would return one record but the ItemSku LMKN7486 and everytime it would return the wrong record but consistently the wrong record so itemsku abcd1234 always returned LMNK7486 One would think it might be a driver problem, but it also could be a user problem. Just posting the question to see if anyone else has had similar senerios. Thanks

    Read the article

  • bad printer isolation on print server or better way?

    - by Joseph
    I have noticed that when a printer or driver screws up on a Windows server it usually locks up or kills the print spooler and everyone can't print until it is fixed. Usually we have to put the troublesome printer on another server so when it fails, it doesn't take the whole group with it. That is assuming we ever figure out which printer is the problem. Is there a way to have it so that one bad apple doesn't ruin the bunch? Even if it is another form of printer serving, that would work as long as it's not hard for the user to find a printer and install drivers.

    Read the article

  • Make cloudera-vm work on Oracle VM VirtualBox

    - by ????? ????????
    I downloaded this and the instructions say: Important: You must enable the I/O APIC in order to use 64-bit mode. (See http://www.virtualbox.org/manual/ch03.html.) On newer versions of VirtualBox, it may default to using SATA as the disk interface. This can cause a kernel panic in the VM. Switching to the IDE driver solves this problem. I am running this on Red Hat 64-bit mode (I've also tried on Ubuntu 64-bit with the same result). I pointed to the cloudera-vm image as a startup disk for the VM. I am getting this message: Failed to open a session for the virtual machine ClouderaDevelopment. VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} Does anyone know what I am doing wrong?

    Read the article

  • Using group policy preferences to push a file to C:\Windows on a restricted user.

    - by Fireshot
    We have a really old Video learning program that we need to run from the network for our students. However it uses Director Player 6.0 and the students get the error: "Unable to copy the driver file C:\Windows\xobglu16.dll to your Windows directory. Your disk may be full" Now the solution I've read is to copy the files manually to each machine and mark them read-only. I'm trying to do this via GPP, but the Event log is showing an Access is denied error. I believe it is because the student accounts do not have permission to c:\windows. Any ideas on a work around without using a script?

    Read the article

  • Windows Experience Index could not be computed

    - by Alexey Ivanov
    I've upgraded recently from Windows Vista to Windows 8. When I try to rate my computer, it accesses DirectX 9 performance, then processes to DirectX 10 tests: And it gets stuck at this point. In 5–10 minutes, it shows error message: The video card is rather old: Mobile Intel 965 Express Chipset Family. I'm pretty sure it does not support DirectX 10. Why does Windows assess it with DirectX 10? And how can I make it skip DirectX 10 tests and get the system rating? The driver was installed automatically by Windows 8 from Windows Update. Version: 8.15.10.2697 Date: 10/01/2012

    Read the article

  • Random flickering on 2.6.32 kernels after suspend

    - by whitequark
    I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

    Read the article

  • Wrong PC-projector resolution in Windows 7

    - by peter.olsson
    I'm connecting a PC-projector (Benq MP721) to a Windows 7 Professional laptop (HP 6730b). All the output settings on the laptop, including the laptop screen, changes to 1024x768 (which the projector supports). However the projector says it receives 1360x768 and asks me to change the resolution to 1024x768. I'm using mirrored display. The laptop is 1024x768 The screen resolution in the control panel says 1024x768 The Intel graphics card utilities says 1024x768 The driver for the projector is a Generic PnP Monitor Is there anything in Windows 7 that would convert my 4:3 resolution to wide screen automatically?

    Read the article

  • Format as NTFS without Journal

    - by palswim
    I have a flash drive that I'd like to format for use in Windows. I would like support for symbolic links, so I can't use FAT/FAT32/exFAT. I would prefer to use the ext4 filesystem and disable journaling, with the Ext2Fsd filesystem driver, but have (so far) found that I can't make soft links across filesystems that Windows will read, Ext2Fsd has an annoying bug about always mounting partitions as read-only and has problems resuming from sleep, and some programs have problems writing to the partition even after manually configuring Ext2Fsd to allow writes. So, I would like to use NTFS for the flash drive, but disable the journaling feature (causes extra writes), if possible. How can I do this?

    Read the article

  • A minimal Linux distribution for my ASUS EEE PC

    - by Andrioid
    I recently bought myself a ASUS EEE 1000HE and I intend to use it for note-taking and light browsing at the University. The machine has a 10" screen so the interface needs to be very compact. I've already tried: EEEbuntu: Very nice driver support and out of the box experience. But I feel that it is too slow booting and the general experience is too heavy in my opinion. Moblin 2: Looks very cool, boots just fine but is way too unstable to use. Also find it annoying that I can't find hotkey documentation anywhere. Any Netbook OS recommendation welcome (although those specific to my model would be great). There is an entire jungle of distributions out there, so if you've been on a safari, please share your experience.

    Read the article

  • Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

    - by Adam Driscoll
    I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

    Read the article

  • Windows 7 Loading speed

    - by Sergiy Byelozyorov
    I have installed Windows 7 64-bit about two week ago. Since then everything was working alright, but yesterday Windows started to load much slower. Main delay comes while Windows logo is glowing -- it used to be around 10-15 seconds and now it's around 2 minutes. As far as I remember, I have only installed Microsoft IntelliMouse driver recently and removed it today. Unfortunately I found out that I have switched off System Restore some time long ago, so can't even test if the problem can be fixed by restoring old version. How can I troubleshoot the problem? Can I somehow find out what's causing the delay? P.S. Please don't suggest to reinstall Windows. I know that will help, but reinstalling all software and settings is a pain and requires a lot of time.

    Read the article

  • KVM Guest installed from console. But how to get to the guest's console?

    - by badbishop
    I'm trying to install a fully virtualized guest (Fedora 14 x86_64) on KVM (RHEL 6), using command-line only (both hypervisor and guest). It goes without errors, and without a tangible result . I'd like to know how to do a text-only installation. So, here's what I've done: # virt-install \ --name=FE --ram=756 --vcpus=1 \ --file=/var/lib/libvirt/images/FE.img --network bridge:br0 \ --nographics --os-type=linux \ --extra-args='console=tty0' -v \ --cdrom=/media/usb/Fedora-14-x86_64-Live-Desktop.iso Starting install... Creating domain... | 0 B 00:00 Connected to domain FE Escape character is ^] ÿ Now what? As I understand after googling for a couple of days, I should see the guest's output from the text installation, but nothing happens. virt-viewer cannot connect to it, kindly suggesting that I explore all the options by adding --help (which I did). If I reconnect with virsh, I see this: Domain installation still in progress. You can reconnect to the console to complete the installation process. [root@v ~] # virsh console FEConnected to domain FE Escape character is ^] This shows that VM is running # virsh list Id Name State ---------------------------------- 8 FE running Qemu log: LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/libexec/qemu-kvm -S -M rhel6.0.0 -enable-kvm -m 756 -smp 1,sockets=1,cores=1,threads=1 -name FE -uuid 6989d008-7c89-424c-d2d3-f41235c57a18 -nographic -nodefconfig -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/FE.monitor,server,nowait -mon chardev=monitor,mode=control -rtc base=utc -no-reboot -boot d -drive file=/var/lib/libvirt/images/FE.img,if=none,id=drive-ide0-0-0,format=raw,cache=none -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive file=/media/usb/Fedora-14-x86_64-Live-Desktop.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:0a:65:8d,bus=pci.0,addr=0x2 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 char device redirected to /dev/pts/1 Output of /etc/libvirt/qemu/FE.xml # cat /etc/libvirt/qemu/FE.xml <domain type='kvm'> <name>FE</name> <uuid>6989d008-7c89-424c-d2d3-f41235c57a18</uuid> <memory>774144</memory> <currentMemory>774144</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/var/lib/libvirt/images/FE.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:0a:65:8d'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </memballoon> </devices> </domain> I'm obviously missing something that many others don't, but what is it? Thanx in advance!

    Read the article

  • What is the best file system and allocation size for a USB flash drive?

    - by e-t172
    I'm considering using my 4 GB Kingston DataTraveler USB stick to store my Firefox and Thunderbird profiles for my laptop and desktop PCs. I want to maximize performance when using Firefox. The question is: what is the best file system and allocation size for the fastest Firefox profile operation on a USB flash drive? I'm using Windows 7 on both machines and I don't care about compatibility or the drive's lifetime. I just want to maximize performance. I could even use ext2 with the Ext2 IFS driver if that means it'll be faster. I'm assuming (perhaps I'm wrong) that putting a Firefox profile on a USB stick would be a "lots of small files" usage. In that case, it seems that NTFS would perform best, but I'm not sure. Besides I found nothing regarding the best allocation size to use. Considering that the default allocation size is designed for hard drives (which have different characteristics), I'm assuming that the default allocation size is not the best.

    Read the article

  • Can't play blu ray on sony vaio fz

    - by user19455
    Hi. I have a Sony Vaio FZ (VGN-FZ31M) with a blu ray drive. I have just recently purchased the 2001 Space Odissey in blu ray but haven't been able to play on my laptop. When I try to play it with WMP i get this: "Windows Media Player cannot play the DVD. The disc was created in a manner that the Player does not support." and this with VLC: "VLC cannot open MRL. Check log for details." I have once formatted the pc and done a clean install without the sony vaio recovery cd. Is it possible that it is necessary a specific blu ray driver that I have not installed? Thanks.

    Read the article

  • HP LasterJet P2035 not mapping on remote desktop

    - by Matthew Pomar
    I am connecting from a Windows 7 Pro laptop to a remote 64bit Windows 2008 R2 server via Remote Desktop. My local laptop has a networked HP LaserJet P2035 printer set as the default printer. When I connect to the server, the local (networked) HP printer does not get mapped on the server. I've installed the 64bit drivers from HP for the printer and was able to create a test printer on the server itself using the correct driver (HP LaserJet P2035) priting to a file. I've also checked the Printer under Local Resources tab on my Remote Desktop client. Does anyone know where else I should check to get my local printer to make to my remote desktop session?

    Read the article

  • Firewalling gateways and IDS's

    - by Scott Davies
    Hi, For IDS, I plan to have a Win 2008 server running on the gateway with the majority of roles disabled. I plan to firewall the Internet connection, but I'd also like to install Snort to work as an IDS. However, I am guessing that regardless of the Snort install of the promiscuous Winpcap driver, I won't be able to monitor ports that the firewall blocks. My thinking is that chain of flow is: Internet-Firewall on Win 2008-Winpcap-Snort-internal network Is there a way to still monitor services that the firewall will block (i.e. TCP 445 SMB) ? Perhaps run the data through Snort and then through the firewall ? Thanks

    Read the article

  • Windows XP to Ubuntu 10.04 via VNC does not refresh

    - by hughdbrown
    I've tried tightvncserver and vnc4server on Ubuntu. I've tried tightvnc viewer and ultravnc viewer on Windows XP. I can connect from Windows to Ubuntu with any combination, but there is no screen refresh: I can drag a window on Ubuntu using my mouse in Windows or type into a terminal in Ubuntu from my keyboard in Windows, but the image does not change on Windows. I can request a screen refresh from Windows but the screen does not update. I am running the ATI driver on Ubuntu. I've tried stepping the System|Preferences|Appearance|Visual Effects down from Extra to Normal with no effect.

    Read the article

  • What's using up my memory?

    - by Mehrdad
    I already know what's causing this -- it's the driver for FancyCache, which I'd installed myself. But as you can see, nothing in the screenshot tells me anything about this. I just happen to know. So the question is, if I didn't know this, how would I figure out what's using up so much of my RAM? (For reference: It's currently 1.7 GiB used, and the "missing" amount -- for FancyCache -- is 512 MiB. Clearly, that extra half-gigabyte not showing up anywhere I can see below.)

    Read the article

  • Problems with Xen installation

    - by Rodnower
    Hello, I have CentOS 5.4 installed. Now I'm trying to install Xen with out connecting to Internet (I have any driver for modem, so I search on Inernet only from Windows). All I have are 7 installation disks. First I done was to find kind of some add/remove programs wizard but it needed connection to Inernet. Second I try was to find Xen rpm on all disks and install it. But I fell on some dependency of some dependency. Third I attempted was to boot from first disk and do upgrade, but also it was unsuccessfully... So my question is: is there some way to install Xen from CentOS installation disks with out network? Thank you for ahead.

    Read the article

  • How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

    - by pratikk
    I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

    Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >