Search Results

Search found 74454 results on 2979 pages for 'hardware problem'.

Page 159/2979 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

  • Problem in listening to multicast in multihomed Linux server

    - by Lior
    I am trying to write a multicast client on a machine with two NICs, and I can't make it work. I can see with a sniffer that once I start the program the NIC (eth4) start receiving the multicast datagrams: y.y.y.y. (some ip) - z.z.z.z (multicast ip, not my eth4 NIC IP) UDP Source port: kkk (some other port) Destination port: xxx (multicast port) However, I can't get those packets using my program (listening to port xxx on eth4). I also added: route add 224.0.0.0 netmask 240.0.0.0 dev eth4 Searched the web for some examples/explanations, but it seems like I do what everybody else does. Any help will be appreciated. is there anything else to do with route/iptables?

    Read the article

  • Problem connecting to SSH in office network

    - by Jeune
    I have trouble connecting via SSH to a server whenever I am in the office. I get as far as being prompted for my password and then after that there's a long wait which always ends in a Write failed: Broken pipe This is only for connecting via SSH. I use svn to commit files to a repository hosted on the same server and there are no hitches. Furthermore, this only happens in our office. When I go the university or whenever I am at home or at the coffee shop I am able to connect seamlessly. There are no firewalls in our office. It's just a basic wireless router connected to a modem setup. It's the same setup I have at home and I guess the same setup in the coffee shop. What are the causes for a broken pipe and why does this phenomenon only happen when I try connect via SSH and not when I work with svn on the same server? Updated: Some debug logs after authentication: debug3: packet_send2: adding 48 (len 64 padlen 16 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env GTK_MODULES debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env LIBGL_DRIVERS_PATH debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env DEFAULTS_PATH debug3: Ignored env SESSION_MANAGER debug3: Ignored env USERNAME debug3: Ignored env XDG_CONFIG_DIRS debug3: Ignored env DESKTOP_SESSION debug3: Ignored env LIBGL_ALWAYS_INDIRECT debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug1: Sending env LANG = en_PH.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env GNOME_KEYRING_PID debug3: Ignored env MANDATORY_PATH debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env OLDPWD debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 UPDATE 2011-14-07: I am able to connect to the server via SSH now. I didn't do anything but that's because there is no one in the office but me! Having said that, is it possible that it has something to do with the number of sessions an SSH server can handle? UPDATE 2011-14-07: I try to login via SSH through Putty on another machine running windows together with my current SSH session in Ubuntu and now it seems my SSH session in Ubuntu has been dropped. I can't type into the terminal. Is Putty the culprit now?

    Read the article

  • Problem getting puppet to sync custom fact

    - by byron-appelt
    I am having trouble getting puppet to sync a custom fact. I am using puppet version 0.25.4. The fact is inside a module as described in http://docs.reductivelabs.com/guides/plugins_in_modules.html If I specify --pluginsync on the command line it does sync correctly, but does not otherwise even though I have pluginsync=true in my puppet.conf. Is it correct that this command line option and the option in the puppet.conf should have the same behavior?

    Read the article

  • Facing problem in configuring Reporting Server

    - by idrees99
    Dear All, I am unable to configure reporting server with sql server 2005 express edition. I have posted the link of a screen shot which shows the status.when ever i go to configure the reporting services it gives me the following errors(see screen shot)...also unable to start the reporting services.It starts and then stopped automatically.... I am using windowsxp professional..... Need help... thanks. ![alt text][1] http://www.freeimagehosting.net/image.php?8977c7f37a.jpg

    Read the article

  • Clear Type problem in Windows 7

    - by Florin Sabau
    I try to tune ClearType in Windows 7 x64 using the ClearType Text Tuner. I can choose whatever options I want on the first 3 pages, but on the last page, whatever I choose is reverted as soon as I click finish. Next time I run the tuner I can see that the second option is selected, not the option that I wanted (the last one). Has anybody else found this odd behavior?

    Read the article

  • psybnc on nas: ncurses problem

    - by holms
    Trying to get compile psybnc on NAS. ipkg is default package manager in here. I've installed ncurses already, it's in /opt/lib (libncurses.so) [\w] # ls /opt/lib | grep ncurses libncurses.so libncurses.so.5 libncurses.so.5.7 libncursesw.so libncursesw.so.5 libncursesw.so.5.7 [\w] # file libncurses.so.5.7 libncurses.so.5.7: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, stripped I added this path to /etc/profile [\w] # echo $PATH /bin:/sbin:/usr/bin:/usr/sbin:/opt/bin:/opt/sbin:/opt/lib So trying to make menuconfig gives me this error [\w] # make menuconfig Initializing Menu-Configuration [*] Running Conversion Tool for older psyBNC Data. Using existent configuration File. [*] Running Autoconfig. System: Linux Socket Libs: Internal. Environment: Internal. Time-Headers: in time.h and sys/time.h Byte order: Big Endian. IPv6-Support: Yes, general support. But no interface configured. async-DNS-Support: Yes. SSL-Support: No openssl found. Get openssl at www.openssl.org Creating Makefile [*] Creating Menu, please wait. This needs the ncurses library. If it is not available, menuconf wont work. If you are using curses, use make menuconfig-curses instead. make: *** [menuconfig] Error 1 Same goes for make menuconfig-curses [\w] # make menuconfig-curses Initializing Menu-Configuration using Curses [*] Running Conversion Tool for older psyBNC Data. Using existent configuration File. [*] Running Autoconfig. System: Linux Socket Libs: Internal. Environment: Internal. Time-Headers: in time.h and sys/time.h Byte order: Big Endian. IPv6-Support: Yes, general support. But no interface configured. async-DNS-Support: Yes. SSL-Support: No openssl found. Get openssl at www.openssl.org Creating Makefile [*] Creating Menu, please wait. This needs the curses library. If it is not available, menuconf wont work. make: *** [menuconfig-curses] Error 1 Psybnc compiled ok, just wanna work with menuconfig instead of configuration file.

    Read the article

  • networking related problem

    - by abhay
    i have installed two LAN cards in my PC. one is used for local networking and other is for Wide area networking( both have a different gateways). But when i need to browse in WAN for that i have to disable my LAN and vice versa. so i don't know the technical / logical reason behind that. so could you please give me reason why this happens.

    Read the article

  • I think installing PostFix solved my problem, but it seemed *too* easy

    - by Joel Marcey
    Hi, This is a followup to a serverfault post I made a while ago: http://serverfault.com/questions/21633/how-do-i-target-a-different-mail-server-depending-on-domain-with-exim (More context here too: http://forum.slicehost.com/comments.php?DiscussionID=3806 ) I have a slice/VPS at Slicehost. I basically decided to scrap exim (i.e., purge it), and start anew with my email infrastructure. In case you didn't read any of the above threads, basically my goal was to have a send only mail infrastructure that relays all outgoing email to Google Apps. I also wanted to where email from domain1 (a Wordpress installation) would show it coming from domain1.com and email from domain2 (a normal website) would show it coming from domain2.com. So I decided to give PostFix a try. I literally followed the surprisingly simple instructions here: http://sudhanshuraheja.com/2009/02/slicehost-setup-outgoing-mail-google-apps-postfix/ And voila, all seems to be working as I expected. My email tests show email coming from the proper locations (either domain1 or domain2 depending on where the emails were sent from). But this all seemed too simple to me. So simple, in fact, that I feel that something is amiss. When I installed PostFix according to the instructions in the post above and it worked, I was surprised that I didn't have to specify an SMTP server, a port number, any authentication credentials, etc. My slice is set up such that I have MX records for Google Apps (e.g., ASPMX.L.GOOGLE.COM.) in my DNS settings, but I am not sure if that is why it is working. My email infrastructure knowledge is admittedly limited, but with this am I suspect to: Spammers using my email infrastructure? My emails going to people as spam? Something else sinister? I have actually stopped running PostFix until I understand this better. Thanks!

    Read the article

  • Active Directory Problem

    - by Ankur Dholakiya
    Hello All, I have one server 2008 installed with AD, SQL and IIS. Now I am trying to attach different HDD on this server only. I am able to install windows server 2008 r2 64bit on the server, but when I try to install the ActiveDirectory on the server the setup doesn't get completed and keep processing at following level. "Configuring Active directory and local host domains ......." If I attach same HDD on any other PC Active directory setups completes successfully. My server is Xeon quad core with 8GB of RAM. Can any one help the appropriate solution for this?

    Read the article

  • Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

    - by Matt Taylor
    I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

    Read the article

  • problem with VNC

    - by Eva
    I upload vnc on my server and when i execute it : winvnc.exe -install i get this error : The vnc service could not be installed what am i going to do ?

    Read the article

  • Apache+FastCGI Timeout Problem

    - by Sadjad Fouladi
    Hi all. I've recently installed mod_fastcgi and Apache 2.2. I've a simple cgi script as below (test.fcgi): #!/bin/sh echo sadjad But when I invoke "mysite.com/test.fcgi" I see "Internal Server Error" message after a short period of time. The error.log file shows this error message: [Tue Jan 31 22:23:57 2006] [warn] FastCGI: (dynamic) server "~/public_html/oaduluth/dispatch.fcgi" has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds This is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ django.fcgi/$1 [QSA,L] I'm very confused, please help me! [Sorry for my poor English!]

    Read the article

  • Problem with script that excludes large files using Duplicity and Amazon S3

    - by Jason
    I'm trying to write an backup script that will exclude files over a certain size. If i run the script duplicity gives an error. However if i copy and paste the same command generated by the script everything works... Here is the script #!/bin/bash # Export some ENV variables so you don't have to type anything export AWS_ACCESS_KEY_ID="accesskey" export AWS_SECRET_ACCESS_KEY="secretaccesskey" export PASSPHRASE="password" SOURCE=/home/ DEST=s3+http://s3bucket GPG_KEY="gpgkey" # exclude files over 100MB exclude () { find /home/jason -size +100M \ | while read FILE; do echo -n " --exclude " echo -n \'**${FILE##/*/}\' | sed 's/\ /\\ /g' #Replace whitespace with "\ " done } echo "Using Command" echo "duplicity --encrypt-key=$GPG_KEY --sign-key=$GPG_KEY `exclude` $SOURCE $DEST" duplicity --encrypt-key=$GPG_KEY --sign-key=$GPG_KEY `exclude` $SOURCE $DEST # Reset the ENV variables. export AWS_ACCESS_KEY_ID= export AWS_SECRET_ACCESS_KEY= export PASSPHRASE= When the script is run I get the error; Command line error: Expected 2 args, got 6 Where am i going wrong??

    Read the article

  • Disk Partitioning problem with fdisk.

    - by MA1
    Currently i am using fdisk to create/resize windows partitions. Following is a sample input script to fdisk to create/resize windows partitions: fdisk /dev/sda < partInput the contents of partInput are as follows: d #delete the partition 3 #partition number to be deleted n #add a new partition p #primary: type of new partition 3 #new partition number 18804 #start cylinder of new partition 77433 #end cylinder of new partition t #change the type of partition 3 #partition number whose type(filesystem) is to be changed 7 #HPFS/NTFS: partition type(filesystem) n #add a new partition p #primary: type of partition 77434 #first cylinder of new partition 77825 #end cylinder new partition w #write all the above changes As you see in the above input we are using cylinders for start and end. Earlier i am using sectors as unit and everything is working fine but getting problems when partitioning a 1.5TB hard drive. Then i changed the unit to cylinders but it is working on some machines not all. On some machines fdisk failed to create the partition table correctly. So, i am thinking to move to parted if there is no way to do the above using fdisk. Please also tell me how to correctly convert sectors to cylinders? How to perform all the above steps using parted without losing the data OR how to use fdisk correctly?

    Read the article

  • What's problem with multi monitor usage in rdc7?

    - by e-turhan
    Hello, I want to use dual monitors with remote desktop on windows 7 ultimate. Host machine is win server 2008 r2. I open the run window type mstsc /multimon and press enter, also "use all my monitors for the remote session" is checked.By this way RDC is opening but only in one monitor.Do I need to do any changes on host too? I have tried /span attribute and it worked but I don't want it.

    Read the article

  • Sound Card Problem?

    - by Paul
    I bought a new sound card because my built in sound card did not function. When i open youtube, media player or anything that can create a sound my computer will hang up and sometimes when i start my computer it will hang when the windows xp sound will activate.. Help me pls ASAP

    Read the article

  • Windows 7 - system error 5 problem

    - by ianhobson
    My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

    Read the article

  • Window 7 + SVN permission problem

    - by acidzombie24
    In tortoisesvn i get the error Can't create directory 'C:\dev\repo\subfolder\db\transactions\49-1g.txn': ... I used robocopy (i cant remember if i used /copyall) to copy the files onto an external drive then i copied it back after a format. Now ATM i cannot commit. How do i fix this?

    Read the article

  • freeradius maximum session time problem

    - by haw3d
    hello I'm using openvpn and free-radius for control user accounts. for maximum session time for an user, free-radius has sqlcounter.conf that control that, but after a connection has disconnected that is useful and cannot destroy a connection. for control account time dynamically i need another script that do that. but should anytime that a connection has established a trigger run. is anyway to fire a custom trigger or script when a connection has established? or any way to control session time dynamically?

    Read the article

  • Problem installing iATKOS S3 Version 2 Snow Leopard 10.6.3 on DELL Precision T5500 Desktop

    - by Matias Dominoni
    Someone managed to install this right? I've used the following parameters: -v -x -f cpus=1 busratio=22 After installation, boot fails with a Kernel Panic. The exact error here: http://www.insanelymac.com/forum/index.php?showtopic=182609&mode=linearplus I'm aware that is very annoying installation. http://www.insanelymac.com/forum/index.php?showtopic=222386 Does anyone knows a guide to follow up or any other distrubution that works?

    Read the article

  • Exchange 2003 ActiveSync problem with certificate

    - by colemanm
    We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

    Read the article

  • VMWare tools on Ubuntu Server 10.10 kernel source problem

    - by Hamid Elaosta
    After install and running the vm-ware config, the config needs my kernel headers to compile some modules, ok, so I'll give it them, but it just won't work. It asks for the path of the directory of C header files that match my running kernel. If I uname -r I get 2.6.35-22-generic-pae So I tell it the source path is /lib/modules/2.6.25-22-generic-pae/build/include and it returns "The directory of kernel headers (version @@VMWARE@@ UTS_RELEASE) does not match your running kernel (version 2.6.35-22-generic-pae). ..I'm confused? can anyone offer suggestions please? I installed hte kernel source andh eaders myself using sudo apt-get install linux-headers-$(uname -r)

    Read the article

  • Microsoft word 2007 unusual problem

    - by Nitz
    Hey guys,i was working today on Microsoft word 2007.their on the first line, as soon as try to save the file, then one sentence is written automatically. the sentence is like this This text was added by using code.if i try to remove that sentence then also , it comes again. if i try to save the file then, this sentence is included again.is any one had gone through this kind of error?if i try to take new file now, then also in new file if i don't write any thing, and then i save the file then this sentence is auto. included in the file.

    Read the article

  • ESXI ftpput fails Syntax problem

    - by Datapimp23
    I'm trying to ftpput my virtual machines dirs to our NAS. Which doesn't support NFS. Only FTP and samba. So I'm in the ESXi console and enter the followin command ftpput ipaddress /vmfs/volumes/4a1157e1-be81171a-1b39-001d09080124/VMNAME /Backup /Backup is a public share on the nas, I can access it through any ftp client. After I enter I get the following ftpput: can't open 'Backup': No such file or directory I'm kind of in the dark here. Any suggestions?

    Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >