Search Results

Search found 2704 results on 109 pages for 'miguel ping'.

Page 16/109 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • What determines the time to first ping response in an OS?

    - by Stuart Woodward
    When a server (say Windows, Linux) is rebooted, it will take some time to respond to ping. I'm assuming that the software firewall has to be up before pings will be returned as there might be a setting to disable ping responses. Everyone knows that Windows and Linux have have totally different architectures so lets treat them separately. The answer I'm looking for is "After XXX is running, pings will be returned." It would be helpful to know where in the boot order this is too. i.e. at the start or end. I ask because we get questions from a customer about why it takes so long to respond to ping after creating a Virtual Machine. I'm sure this is just an artefact of the OS boot behaviour.

    Read the article

  • parallel vms in VMWare Server - how to configure network so they can ping each other?

    - by IronGoofy
    I'm using VMWare Server (currently on Version 1.0.7) and have two VMs that I would like to run at the same time. However, I'm having problems in setting them up so they can ping each other. I've configured them to use 'Bridged' networking. They both obtain an IP address from the DHCP server on my network, but after that they can't ping each other. It seems that only the first one has a functioning network connection (I can ping it from the host machine and Internet connection works), but the other one does not. If it helps, both VMs are running XP SP 3. Any ideas? Thanks!

    Read the article

  • Wireless Connected But No Internet Connection (Ubuntu 12.04)

    - by Zxy
    I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

    Read the article

  • Why might one host be unable to access the Internet, when it can ping the router and when all other hosts can?

    - by user1444233
    I have a Draytek Vigor 2830n. It's kicking out a 192.168.3.0 LAN. It performs load-balancing across dual-WAN ports, although I've turned off the second WAN to simplify testing. There are many hosts on the LAN. All IPs are allocated through DHCP, most freely allocated from the pool, but one or two are bound to NIC MAC addresses. All hosts can access the Internet, save one. That host (192.168.3.100 or 'dot100' for short) gets allocated an IP address (and the right gateway address, DNS server addresses, subnet etc.) dot100 can ping itself. It can ping the gateway, and access the latter's web interface via port 80. It's responsive and loss-free (sustained ping over a couple of minutes reports no data loss). Yet, for some reason that evades me, dot100 can't ping an external IP address or domain name. I suspect it's never been able to, because it was getting some Internet access from a second adaptor (different subnet), but that's now been turned off, which exposed the problem. In dot100, I've tried: two operating systems (Windows 8 and Knoppix), to rule out anti-virus programs etc. two physical adaptors two cables, on each adaptor two IPs (e.g. .100 and .103 assigned by Mac and .26 from the pool) both dynamic and assigned (MAC-bound) DHCP-allocated IPs but none of this experiments yielded any variation in the result. dot100 is a crucial host. It's a file server for the network, so I need it to be reliably allocated a consistent IP. Can anyone offer a potential solution or a way forward with the analysis please? My guess My analysis so far leads me to believe it's a router issue. I've checked the web interface very carefully. There are no filters setup in Firewall - General Setup or Filter Setup. I suspect it's a corrupted internal routing table, but the web UI shows this as the Routing table: Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 62.XX.XX.X WAN1 * 62.XX.XX.X/ 255.255.255.255 via 62.XX.XX.X WAN1 S 82.YY.YYY.YYY/ 255.255.255.255 via 82.YY.YYY.YYY WAN1 C 192.168.1.0/ 255.255.255.0 directly connected WAN2 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2

    Read the article

  • Why does '~$ nc -z T43 1-1024' not produce any output although '~$ ping T43' is successful?

    - by user43816
    Why does '~$ nc -z T43 1-1024' not produce any output although '~$ ping T43' is successful? '~$ nc -z -v T43 1-1024' prints 'Connection to T43 22 port [tcp/ssh] succeeded!' and 'nc: connect to T43 port 1000 (tcp) failed: Connection refused.' 'man nc': "PORT SCANNING: It may be useful to know which ports are open and running services on a target machine. The -z flag can be used to tell nc to report open ports, rather than initiate a connection. For example: '$ nc -z host.example.com 20-30'.

    Read the article

  • linux routing bug?

    - by Balázs Pozsár
    I have been struggling with this not easily reproducible issue since a while. I am using linux kernel v3.1.0, and sometimes routing to a few IP addresses does not work. What seems to happen is that instead of sending the packet to the gateway, the kernel treats the destination address as local, and tries to gets its MAC address via ARP. For example, now my current IP address is 172.16.1.104/24, the gateway is 172.16.1.254: # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:1B:63:97:FC:DC inet addr:172.16.1.104 Bcast:172.16.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:230772 errors:0 dropped:0 overruns:0 frame:0 TX packets:171013 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:191879370 (182.9 Mb) TX bytes:47173253 (44.9 Mb) Interrupt:17 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.1.254 0.0.0.0 UG 0 0 0 eth0 172.16.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 I can ping a few addresses, but not 172.16.0.59: # ping -c1 172.16.1.254 PING 172.16.1.254 (172.16.1.254) 56(84) bytes of data. 64 bytes from 172.16.1.254: icmp_seq=1 ttl=64 time=0.383 ms --- 172.16.1.254 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.383/0.383/0.383/0.000 ms root@pozsybook:~# ping -c1 172.16.0.1 PING 172.16.0.1 (172.16.0.1) 56(84) bytes of data. 64 bytes from 172.16.0.1: icmp_seq=1 ttl=63 time=5.54 ms --- 172.16.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 5.545/5.545/5.545/0.000 ms root@pozsybook:~# ping -c1 172.16.0.2 PING 172.16.0.2 (172.16.0.2) 56(84) bytes of data. 64 bytes from 172.16.0.2: icmp_seq=1 ttl=62 time=7.92 ms --- 172.16.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 7.925/7.925/7.925/0.000 ms root@pozsybook:~# ping -c1 172.16.0.59 PING 172.16.0.59 (172.16.0.59) 56(84) bytes of data. From 172.16.1.104 icmp_seq=1 Destination Host Unreachable --- 172.16.0.59 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms When trying to ping 172.16.0.59, I can see in tcpdump that an ARP req was sent: # tcpdump -n -i eth0|grep ARP tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 15:25:16.671217 ARP, Request who-has 172.16.0.59 tell 172.16.1.104, length 28 and /proc/net/arp has an incomplete entry for 172.16.0.59: # grep 172.16.0.59 /proc/net/arp 172.16.0.59 0x1 0x0 00:00:00:00:00:00 * eth0 Please note, that 172.16.0.59 is accessible from this LAN from other computers. Does anyone have any idea of what's going on? Thanks. update: replies to the comments below: there are no interfaces besides eth0 and lo the ARP req cannot be seen on the other end, but that's how it should work. the main problem is that an ARP req should not even be sent at the first place the problem persist even if I add an explicit route with the command "route add -host 172.16.0.59 gw 172.16.1.254 dev eth0"

    Read the article

  • Ubuntu 12.04 + Wifi not working

    - by user171154
    i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

    Read the article

  • Ajax doesn't trigger a change-event on a webkit based browser

    - by user319464
    I have adapted a Jquery plugin to for-fill my needs to send GET requests to servers as a way of "pinging" them. I've also added some javascript code to add some fancy features like: depending on the changed value in a that the Jquery plugin changes, it changes the Icon accordingly. To make it all work essentially, I made so that when Ajax gets a "complete" event, it forces a "onChange" event to the span, triggering the javascript validation function to change the status icons. Here is the code of my slightly modified jQuery Plugin: /** * ping for jQuery * * Adapted by Carroarmato0 (to actually work instead of randomly "pinging" nowhere instead of faking * * @auth Jessica * @link http://www.skiyo.cn/demo/jquery.ping/ * */ (function($) { $.fn.ping = function(options) { var opts = $.extend({}, $.fn.ping.defaults, options); return this.each(function() { var ping, requestTime, responseTime ; var target = $(this); var server = target.html(); target.html('<img src="img/loading.gif" alt="loading" />'); function ping() { $.ajax({url: 'http://' + server, type: 'GET', dataType: 'html', timeout: 30000, beforeSend : function() { requestTime = new Date().getTime(); }, complete : function() { responseTime = new Date().getTime(); ping = Math.abs(requestTime - responseTime); if (ping > 2000) { target.text('niet bereikbaar'); } else { target.text(ping + opts.unit); } target.change(); } }); } ping(); opts.interval != 0 && setInterval(ping,opts.interval * 1000); }); }; $.fn.ping.defaults = { interval: 3, unit: 'ms' }; })(jQuery); target.change(); is the code that triggers the "onchange" event in the span: echo " <td class=\"center\"><span id=\"ping$pingNb\" onChange=\"checkServerIcon(this)\" >" .$server['IP'] . "</span></td>"; In Firefox this works, checkServerIcon(this) gets executed and passes the span object to the function. function checkServerIcon(object) { var delayText = object.innerHTML; var delay = delayText.substring(0, delayText.length - 2); if ( isInteger(delay) ) { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/enable_server.png'; } else { if (delay == "bezig.") { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/search_server.png'; } else { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/desable_server.png'; } } } My guess would be that there's something different in WebKit browsers in the way object.parentNode.previousSibling.parentNode. .... works...

    Read the article

  • Everytime I ping my server, it is pinging localhost instead?

    - by esac
    I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

    Read the article

  • smbclient -L host works. ping host doesn't work. What is missing

    - by DrorCohen
    I upgrade my ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's netbios name. I get "Unknown Host". However running smbclient -l HostName - give me all the output in the world. Stracing the ping I can it tries to use resolv.conf (expected fail) and then when accessing mdns stuff it fails (no mdns.allow file) and exits. Here's the host line from /etc/nsswitch.conf: hosts: files wins mdns4_minimal [NOTFOUND=return] dns mdns4 I've added wins right after files (and also tried before dns. Nothing helps. Reboot after every change. What am I missing?

    Read the article

  • problem with crawl many url in .net: Server IP not ping. maybe bandwidth or http connection limit ex

    - by Hamid
    Hi to all I develop web crawling service (windows service / multi-thread) . its work fine, but sometimes my server network not response. and i can't ping server IP (from internet), but can ping by other network card (local ip) that not access to internet. after i open server with remote desktop and stop crawling service. i could ping. What's my problem? Bandwidth limit or max connection limit exceed or ??? how to prevent this issue? Note: when this problem occur, i open browser for browse web site, but can't open any website!!! Could you please help me. Thanks in advanced

    Read the article

  • Having problem with a crawl service in .net: Server not responding to IP ping. Is it bandwidth or ht

    - by Hamid
    Hi to all I develop web crawling service (windows service / multi-thread) . its work fine, but sometimes my server network not response. and i can't ping server IP (from internet), but can ping by other network card (local ip) that not access to internet. after i open server with remote desktop and stop crawling service. i could ping. What's my problem? Bandwidth limit or max connection limit exceed or ??? how to prevent this issue? Note: when this problem occur, i open browser for browse web site, but can't open any website!!! Could you please help me. Thanks in advanced

    Read the article

  • Gateway on a virtual network interface used by LXC guests

    - by linkdd
    I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

    Read the article

  • How to connect to a Virtualbox guest from the host when network cable unplugged

    - by Greg K
    I'd like to work offline (I'm flying to the US twice this month), to do this I need access to a linux development server. When I work from home I boot a VirtualBox VM and that acts as my dev server for the day (providing Apache, PHP & MySQL to run my server side code). However, I'd like to work with my VM when I'm not connected to a network. I have my Ubuntu VM guest set up with a bridge connection so it can serve HTTP and provide SSH access from inside my local network. I've tried to manually configure my network settings on both Mac OSX (the host) and Ubuntu (the guest) but I can't even ping my own NIC address (127.0.0.1 can, 192.168.21.x I can't) in OS X when I unplug the cable. Manual network settings: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx inet 192.168.21.5 netmask 0xffffff00 broadcast 192.168.21.255 media: autoselect (100baseTX <full-duplex,flow-control>) status: active I can ping localhost fine, as well as my VM (.20) and SSH too. $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes 64 bytes from 192.168.21.5: icmp_seq=0 ttl=64 time=0.085 ms 64 bytes from 192.168.21.5: icmp_seq=1 ttl=64 time=0.102 ms 64 bytes from 192.168.21.5: icmp_seq=2 ttl=64 time=0.100 ms 64 bytes from 192.168.21.5: icmp_seq=3 ttl=64 time=0.094 ms $ ping 192.168.21.20 PING 192.168.21.20 (192.168.21.20): 56 data bytes 64 bytes from 192.168.21.20: icmp_seq=0 ttl=64 time=0.910 ms 64 bytes from 192.168.21.20: icmp_seq=1 ttl=64 time=1.181 ms 64 bytes from 192.168.21.20: icmp_seq=2 ttl=64 time=1.159 ms 64 bytes from 192.168.21.20: icmp_seq=3 ttl=64 time=1.320 ms Network cable unplugged: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx media: autoselect status: inactive $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host Request timeout for icmp_seq 0 ping: sendto: No route to host Request timeout for icmp_seq 1 Does OS X disable the NIC when the network cable is unplugged? Any way to stop it doing this?

    Read the article

  • VMware Workstation Bridged Network Host UnReachable

    - by user2097818
    VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

    Read the article

  • Linux/hostapd: AP can ping clients, clients can access internet, can't access www@wlan1 with more than 5-6 packets at once

    - by mhambra
    Please edit the title, can't make it sound better. -- OP. Hi all, I have a Wifi USB dongle in a PC, that serves as an AP for laptop. wlan1: 192.168.2.1, netmask 255.255.255.0, routed: route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 ping 192.168.2.2 (laptop): ping was ok for lot of packets. Now, I try to access 192.168.2.1:80/myindex.html (apache) from laptop, and can see that own 1kb test page. But, trying to access 192.168.2.1:80/my.jpg, I see the following: GET /my.jpg HTTP/1.1 200 OK <jpg header, about a kilobyte> <TCP packet retransmisson> <TCP packet retransmisson> <end of stream> It seems to be a hostapd's problem (networked stuff worked fine with Ad-Hoc), but it may be also forwarding/routing problem too. What to google for? Even more strange, SSH to that host works fine.

    Read the article

  • netkit: why cant my router 4 pc4 ping my router 1 pc1 - how can I solve this please?

    - by donok
    Below I have four routers connected but my pc1 on r1 cannot ping my pc4 on r4 and also my pc2 on r2 cant ping my pc4 on r4 and vice versa. Below is a network diagram: and the configurations are below that, could anyone help me please on making them accessible? ![connecting 4 routers][1] I cant post my diagram on serverfault(less than 10 rep) so I did on stackoverflow and asked the same question. pc1: ifconfig eth0 195.11.14.5 netmask 255.255.255.0 broadcast 195.11.14.255 up route add default gw 195.11.14.1 dev eth0 pc2.start: ifconfig eth0 200.1.1.7 netmask 255.255.255.0 broadcast 200.1.1.255 up route add default gw 200.1.1.1 dev eth0 pc3: ifconfig eth0 195.20.14.9 netmask 255.255.255.0 broadcast 195.20.1.255 up route add default gw 195.20.14.1 dev eth0 pc4: ifconfig eth0 200.2.1.11 netmask 255.255.255.0 broadcast 200.2.1.255 up route add default gw 200.2.1.1 dev eth0 r1: ifconfig eth0 195.11.14.1 netmask 255.255.255.0 broadcast 195.11.14.255 up ifconfig eth1 100.0.0.9 netmask 255.255.255.252 broadcast 100.0.0.11 up route add -net 200.1.1.0 netmask 255.255.255.0 gw 100.0.0.10 dev eth1 route add default gw 100.0.0.10 lab.conf: if you need more on that Ill post it up but I think most of the info is there. Any help would be greatly appreciated especially trying to make a connection between pc4 and pc1, even if you think it does not make sense please explain why. Thank you.

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • Cannot connect to Github?

    - by user2973438
    so I tried to push some updates onto my repo on github via terminal on Mac OSX 10.8.4 and it doesn't work. I've been getting the same error many times: Lillys-MacBook-Air:Yuewei Lilly$ git push origin master error: Failed connect to github.com:443; Operation timed out while accessing https://github.com/lillybeans/Yuewei.git/info/refs?service=git-receive-pack fatal: HTTP request failed Some background: I've pushed many projects onto github before using terminal (when I was in Canada). I am currently in Shanghai, China, could it be the GFW? But when I was in Beijing, I was able to push projects onto github still. when I do ping github.com: Lillys-MacBook-Air:Yuewei Lilly$ ping github.com PING github.com (192.30.252.131): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 ping: sendto: No route to host Request timeout for icmp_seq 2 ping: sendto: Host is down Request timeout for icmp_seq 3 ping: sendto: Host is down Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 ^C --- github.com ping statistics --- 9 packets transmitted, 0 packets received, 100.0% packet loss Lillys-MacBook-Air:Yuewei Lilly$ I have ShadowSocks (proxy) turned on. Without it I can't access github.com via browser, with it, I can. also when I do "git remote -v" I see both my pull and push remote repos correctly listed. Thank you in advance!

    Read the article

  • Ubuntu server on VM outgoing network(ping google.com) working, incoming(127.0.0.1:8080) is not. Was working previusly

    - by IvarsB
    I have recently installed Ubuntu server with LAMP,OpenSSH and mail on Oracle's VM, it's incoming networking was recently working, apache's default message could be seen when opening 127.0.0.1:8080. But now it's not! :( Could you give me any tips? I couldn't google anything that helped me. :( I'm running windows 7 with such settings http://www.bildites.lv/images/3d91ikwtraw0ld7lhv.png I recently used apt-get --purge remove phpmyadmin. Could that be the problem? How should I fix it? Thank you in advance! Ivars. EDIT: Sorry for the lame formating.

    Read the article

  • What is the aim of this email? Is this a ping/sping? [closed]

    - by mplungjan
    Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >