Search Results

Search found 88103 results on 3525 pages for 'bam data control multiple'.

Page 160/3525 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• Dual Monitor/Xinerama not working; cannot even detect on-board graphic card

  - by Steven H

  I have Kubuntu 12.04 and two identical VGA monitors. One I plugged via DVI-VGA adapter into the DVI port of my discrete AMD Radeon HD 6670, the other into the VGA port of my on-board graphic card (Radeon HD 6410D). After installing Kubuntu I got a black screen, so I booted with nomodeset and installed AMD's catalyst drivers but only the monitor plugged into the discrete graphic card worked. Using lspci I saw that the on-board graphics was not listed. Then I found in the BIOS settings the options "Surround View" and "Onboard Dual Link DVI" both disabled. After enabling both, the on-board graphics card shows up in lspci but in amdcccle, it only shows as [Uknown display]Uknown adapter. When I try to enable xinerama, I get a black screen after rebooting on both monitors. I tried several options and hints from the web but nothing worked so far. I also reinstalled the AMD drivers several times. What should I do?

  Read the article

• Force gdm login screen to the primary monitor

  - by Kirill

  I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and the second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show the login screen always on the primary monitor with resolution 1280x1024? I use Nvidia GT9500 videcard in Twinview mode. I can't use Xinerama because vpdau doesn't work correclty in this mode.

  Read the article

• How do I simplify terrain with tunnels or overhangs?

  - by KKlouzal

  I'm attempting to store vertex data in a quadtree with C++, such that far-away vertices can be combined to simplify the object and speed up rendering. This works well with a reasonably flat mesh, but what about terrain with overhangs or tunnels? How should I represent such a mesh in a quadtree? After the initial generation, each mesh is roughly 130,000 polygons and about 300 of these meshes are lined up to create the surface of a planetary body. A fully generated planet is upwards of 10,000,000 polygons before applying any culling to the individual meshes. Therefore, this second optimization is vital for the project. The rest of my confusion focuses around my inexperience with vertex data: How do I properly loop through the vertex data to group them into specific quads? How do I conclude from vertex data what a quad's maximum size should be? How many quads should the quadtree include?

  Read the article

• Oracle Product Leader Named a Leader in Gartner MQ for MDM of Product Data Solutions

  - by Mala Narasimharajan

  Gartner recently Oracle as a leader in the MQ report for MDM of Product Data Solutions.  They named Oracle as a leader with the following key points:  Strong MDM portfolio covering multiple data domains, industries and use cases Oracle PDH can be a good fit for Oracle EBS customers and can form part of a multidomain solution: Deep MDM of product data functionality Evolving support for information stewardship For  more information on the report visit Oracle's Analyst Relations blog at  http://blog.us.oracle.com/dimdmar/.  To learn more about Oracle's product information solutions for master data management click here. 

  Read the article

• Sorting a Grid of Data in ASP.NET MVC

  Last week's article, Displaying a Grid of Data in ASP.NET MVC, showed, step-by-step, how to display a grid of data in an ASP.NET MVC application. Last week's article started with creating a new ASP.NET MVC application in Visual Studio, then added the Northwind database to the project and showed how to use Microsoft's Linq-to-SQL tool to access data from the database. The article then looked at creating a Controller and View for displaying a list of product information (the Model). This article builds on the demo application created in Displaying a Grid of Data in ASP.NET MVC, enhancing the grid to include bi-directional sorting. If you come from an ASP.NET WebForms background, you know that the GridView control makes implementing sorting as easy as ticking a checkbox. Unfortunately, implementing sorting in ASP.NET MVC involves a bit more work than simply checking a checkbox, but the quantity of work isn't significantly greater and with ASP.NET MVC we have more control over the grid and sorting interface's layout and markup, as well as the mechanism through which sorting is implemented. With the GridView control, sorting is handled through form postbacks with the sorting parameters - what column to sort by and whether to sort in ascending or descending order - being submitted as hidden form fields. In this article we'll use querystring parameters to indicate the sorting parameters, which means a particular sort order can be indexed by search engines, bookmarked, emailed to a colleague, and so on - things that are not possible with the GridView's built-in sorting capabilities. Like with its predecessor, this article offers step-by-step instructions and includes a complete, working demo available for download at the end of the article. Read on to learn more! Read More >

  Read the article

• Correct configuration of multiple Analytics trackers per page, spanning domains and subdomains

  - by Eliot Shepard

  My company publishes sites on a somewhat convoluted domain structure, and we're having trouble getting accurate numbers in Analytics when we have multiple trackers on the page. We publish under two brands (A, B). Each brand has a "national" site at A.com, B.com, as well as per-city "local" sites at eg. ny.A.com, la.A.com, sf.A.com, etc. Right now we're trying to track in these dimensions: Full network (A.com, ny.A.com, B.com, la.B.com, etc.) All sites in brand (A.com, ny.A.com, la.A.com, etc.) Inidividual site (ny.A.com) Here are the commands we're using on an individual site: _gaq.push( ['t0._setAccount', 'UA-XXXXXX-1'], // full network ['t0._setDomainName', 'none'], ['t0._setAllowLinker', true], ['t0._trackPageview'], ['t1._trackPageLoadTime'], ['t1._setAccount', 'UA-XXXXXX-2'], // brand ['t1._setDomainName', 'none'], ['t1._setAllowLinker', true], ['t1._trackPageview'], ['t1._trackPageLoadTime'], ['t2._setAccount', 'UA-XXXXXX-3'], // individual ['t2._setDomainName', 'none'], ['t2._setAllowLinker', true], ['t2._trackPageview'], ['t2._trackPageLoadTime'] ); We send the same commands to each account because we've had strange results when trackers were configured differently in the past. However, right now we're seeing inflated numbers for uniques on all three trackers. What is the correct way to configure this setup? Thanks for your time.

  Read the article

• Applying Interactive Sorting to Multiple Columns in Reporting Services

  - by smisner

  A nice feature that appeared first in SQL Server 2008 is the ability to allow the user to click a column header to sort that column. It defaults to an ascending sort first, but you can click the column again to switch to a descending sort. You can learn more about interactive sorts in general at the Adding Interactive Sort to a Data Region in Books Online. Not mentioned in the article is how to apply interactive sorting to multiple columns, hence the reason for this post! Let’s say that I have a simple table like this: To enable interactive sorting, I open the Text Box properties for each of the column headers – the ones in the top row. Here’s an example of how I set up basic interactive sorting: Now when I preview the report, I see icons appear in each text box on the header row to indicate that interactive sorting is enabled. The initial sort order that displays when you preview the report depends on how you design the report. In this case, the report sorts by Sales Territory Group first, and then by Calendar Year. Interactive sorting overrides the report design. So let’s say that I want to sort first by Calendar Year, and then by Sales Territory Group. To do this, I click the arrow to the right of Calendar Year, and then, while pressing the Shift key, I click the arrow to the right of Sales Territory Group twice (once for ascending order and then a second time for descending order). Now my report looks like this: This technique only seems to work when you have a minimum of three columns configured with interactive sorting. If I remove the property from one of the columns in the above example, and try to use the interactive sorting on the remaining two columns, I can sort only the first column. The sort on the second column gets ignored. I don’t know if that’s by design or a bug, but I do know that’s what I’m experiencing when I try it out!

  Read the article

• Is there a way to change the date format used when InfoPath saves the form data to xml?

  - by Robert

  I have an InfoPath Form template that has some Date Picker controls in it bound to elements in an xml data source. I know I can change the display format of the date by going into the Date Picker Properties and setting the date format. This foramt is only used for display puposes when the form is being filled out. When the form is saved as an xml file the date is always stored in the format YYYY-MM-DD. Is there a way to change the date format that gets serialized to xml? I'm using InfoPath 2007.

  Read the article

• use ubuntu notebook as second monitor for fedora desktop

  - by YumTum

  I was wondering if there is a possibility to use my netbook with ubuntu 12.04 as a second monitor for my fedora desktop, because its keyboard is broken but everything else is running just fine. I already read about x2x, but I hope there is a more direct way to do this (I mean not over the WLAN but e.g. via LAN etc... ). Would it be possible to directly use the monitor without even running the laptop? For example through an VGA adapter? Thanks for your replies!

  Read the article

• Set IP address to point to certain domain

  - by silvercover

  I have a Linux VPS, DirectAdmin as web panel and already set a domain to it. everything is OK and I can see my website in my browser using domain name. Now I need to have access to my site using its IP address. something like http://86.57.88.29, but when I try to load my site in a browser using its IP I get below message and I have to post-fix my IP with /~admin (http://86.57.88.29/~admin) to get it work. This IP is being shared among many domains. To view the domain you are looking for, simply enter the domain name in the location bar of your web browser. So how can I configure my IP to point to my public_html folder without and ~admin like phrase? Thanks.

  Read the article

• Clients with multiple proxy and multithreading callbacks

  - by enzom83

  I created a sessionful web service using WCF, and in particular I used the NetTcpBinding binding. In addition to methods to initiate and terminate a session, other methods allow the client to send to one or more tasks to be performed (the results are returned via callback, so the service is duplex), but they also allow you to know the status of the service. Assuming you activate the same service on multiple endpoints, and assuming that the client knows these endpoints (for example, it could maintain a List of endpoints), the client should connect with one or more replicas of the same service. The client periodically updates the status of the service, so when it needs to perform a new task (the task is submitted by the user via UI), it selects the service currently less loaded and sends the task to it. Periodically, the client also initiates a maintenance procedure in order to disconnect from one or more overloaded service and in order to connect with new services. I created a client proxy using the svcutil tool. I wish each proxy can be used simultaneously by different threads, for example, in addition to the thread that submits the tasks using a proxy, there are also the following two threads which act periodically: a thread that periodically sends a request to the service in order to obtain the updated state; a thread that periodically selects a proxy to close and instantiates a new proxy to replace the closed one. To achieve these objectives, is it sufficient to create an array of proxies and manage their opening and closing in separate threads? I think I read that the proxy method calls are thread safe, so I would not need to perform a lock before requesting updates to the service. However, when the maintenance procedure (which is activated on its own thread) decides to close a proxy, should I perform a lock? Finally, each proxy is also associated with an object that implements the callback interface for the service: are the callbacks (invoked on the client) executed on different threads on the client? I would like to wrap the management of the proxy in one or more classes so that it can then easily manage within a WPF application.

  Read the article

• Sub domain on root domain

  - by dror

  I have a site, actually a "portal"/ "directory" for service providers. Now, for start, we opened every service provider own page on our site, but now we get a lot of applications from those providers that thy want sites from their own. We want to make every service provider his own site, but on sub domain url. ( they don’t mind… its ok for them) So, my site is www.exaple.com There site will be: provider.exaple.com Now I have two questions: can it harm my site in SEO? if one from those sub domain , punished by Google because is owner do "black hat seo" , how it will affect the rood domain? It can make the root domain to get punished?

  Read the article

• Good, simple reasons for having a multiple environments

  - by smp7d

  Throughout my career I had worked at companies that had a collection of different environments for different purposes. We always had more or less our desktop environment, a test environment, a QA environment, a staging environment and a production environment. This went for both servers/applications and any data sources we were using. When I started at my current company I found that 90% of the apps were either developed on a desktop environment against production data sources or developed directly on the production server depending on the platform. I wasn't phased because I was hired in part to make changes to improve the way the development team functioned, which was clear from my interview process. We slowly started to turn the philosophy and pretty soon, most of the apps could be run in either a desktop, test or production environment. Not too long after that staging came around as well. Now most of our developers see the benefit of this methodology and defend it vigilantly. However, we have a number of legacy apps that never got migrated. We also have a number of legacy programmers who think of this as a waste of time. Unfortunately, we got lip service but never full buy-in from management. We got what we thought was a commitment to invest substantially in this about a year ago, but nothing materialized despite the considerable planning that we put into it. Now we are finding that we need more and more environments. We need help from the server/network administration teams for setup and we need participation from the business stakeholders to support the release cycle. We are at a place now where a project can function what I consider "normally" only if you have the right people on the project and the time to set up the proper environments. I'd love to present a complete argument, but management really has no time and interest in hearing me out until there is a critical issue. I cant really articulate the benefits simply as it always just seemed second nature to me. I was wondering if there are any good, simple, irrefutable reasons for the separation of environments that would get managers with no development experience to get behind this idea. Are there any good resources/literature on the topic?

  Read the article

• Dell XPS 15 L502x and Ubuntu 11.04 - HDMI output

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• Any really decent way to get three monitors?

  - by JohnCC

  What satisfactory solutions are there to achieve three monitors on Ubuntu? I know some ATI cards (Eyefinity) can support 3 monitors from a single card, but I don't know how well this is supported under Linux and besides, I've never had much luck with ATI on Linux. The alternative is to try two cards, but there seem to be problems there too. It looks to me like xrandr cannot support 2 GPUs. I believe you'll end up with two separate "Screens" across which you cannot move applications or windows, unless you enable Xinerama which as I understand it disables some acceleration and probably compositing too. I've found so much conflicting information on this online, I'm really confused. Please advise!

  Read the article

• What data counters / meters are available?

  - by Santosh

  Actually I have a wireless 3G modem that works well on Windows based operating system, its interface software were made Windows centric. It can still connect to internet on Ubuntu or other linux based operating system but it won't show the data counter (the interface which shows how much data has been transferred, at what speed). If I continue to surf internet in Linux then I won't have any idea how much data has been used and it would become heavy on my pocket. So I just want a software that let me know how much data has been transferred, if there is a limiter; that warns or disconnects me when I reach predefined MBs then its better. Please let me know if there is any software or script or something like that already there.

  Read the article

• Problem using Skype Screenshare on dual monitors

  - by toobsco42

  I am on Ubuntu 12.04 and when using the screenshare feature of Skype 4.0 on a single monitor I dont have an issue. However as soon as i switch to using dual monitors and try to set up a screenshare, it doesn't work. Does anyone know if this is a known bug in the Skype app? Thanks. Apparently Skype's log files are encrypted, and they recommend just sending the log files to them so that they can determine how to resolve the issue.

  Read the article

• OData Query Option top Forces Data To Be Sorted By Primary Key

  This post show a simple WCF Data Service (Formerly known as ADO.NET Data Services) project that retrieves data using the Reflection Provider for accessing data. It goes on to show that using $top... This site is a resource for asp.net web programming. It has examples by Peter Kellner of techniques for high performance programming...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Differences when Running with OutputCache managed module under ASP.NET IIS7.x with Cache-control header

  - by Shawn Cicoria

  This post is to report some differences when using MVC or IHttpHandlers if you’re attempting to set the Cache-control : max-age or s-maxage value under IIS7.x using the HttpResponse.Cache methods. [UPDATE]: 2011-3-14 – The missing piece was calling  Response.Cache.SetSlidingExpiration(true) as follows: context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; context.Response.Cache.SetSlidingExpiration(true);   Under IIS7.x if you us one of the following 2 methods, you will only get a Cache-ability of “public”.  public ActionResult Image2() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("Respone.Cache.Setxx calls", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); return new FileStreamResult(oStream, "image/jpeg"); } } Method 2 – which is just a plain old HttpHandler and really isn’t MVC3, but under the same MVC ASP.NET application, same result. public class image : IHttpHandler { public void ProcessRequest(HttpContext context) { using (var image = ImageUtil.RenderImage("called from IHttpHandler direct", 5, DateTime.Now)) { context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; image.Save(context.Response.OutputStream, ImageFormat.Jpeg); } } } Using the following under MVC3 (I haven’t tried under earlier versions) will work by applying the OutputCacheAttribute to your Action: [OutputCache(Location = OutputCacheLocation.Any, Duration = 300)] public ActionResult Image1() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("called with OutputCacheAttribute", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; return new FileStreamResult(oStream, "image/jpeg"); } } To remove the “OutputCache” module, you use the following in your web.config: <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules runAllManagedModulesForAllRequests="true"> <!--<remove name="OutputCache"/>--> </modules>

  Read the article

• CRT as 2nd monitor goes screwy after start up?

  - by rhys

  new install of 12.04 on an old dell with a radeon ATI RV516 video card with monitor out and s-video out. During boot up all is good. Both screens operate and look fine. Then just before the desktop appears the cCRT goes purple and is covered in heavy horizontal lines, but as i said during boot up it was fine and the resolution was fine. The main monitor, an lcd, operates normally. everything else works fine, it's just the picture on the CRT that is screwed up. I used the same monitor and CRT running 11.10 which worked fine any help would be appreciated and yes i am a newbie to ubuntu here is a vid showing the completely normal screens at reboot then the purple badness when the desktop loads ?? and don't laugh at the slow machine, it's old. http://www.youtube.com/my_videos_edit?ns=1&video_id=zfuh6lBMLnc

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• menubar visible pipelight on secondray screen

  - by Adrien

  First of all, here is my setup : Ubuntu 13.04 on a laptop, main display is the laptop screen, secondary display is my tv Chrome Pipelight (microsoft silverlight running through wine) a silverlight application in the secondary display(netflix) The problem is that, when i put netflix in fullscreen mode, the menubar remains visible on top of the secondary screen. Apparently the aplication that has focus is Microsoft Silverlight. What can I do to solve this?

  Read the article

• Undeploy multiple SOA composites with WLST or ANT by Danilo Schmiedel

  - by JuergenKress

  As part of our current project the Build Management team asked for a solution to undeploy multiple composites at one time. Of course you have the “Undeploy All from This Partition” menu option in Enterprise Manager but since we have a lot of deployments every day the guys wanted to have a script solution. It is even more important for the nightly deployments on our continuous integration environment – strange, we couldn’t find anybody who wants to do the undeployment via Enterprise Manager manually every night ;-) However with WLST or ANT the SOA Suite comes with two options to undeploy composites via script. In this article I’d like to explain you both ways. Undeployment with WLST You can test the steps below on Oracle's Pre-built Virtual Machine for SOA Suite and BPM Suite 11g. Change to the WLST directory under MIDDLEWARE_HOME/Oracle_SOA1/common/bin. cd /oracle/fmwhome/Oracle_SOA1/common/bin/ Open WLST ./wlst.sh Connect to the SOA server Read the full article by Danilo Schmiedel SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: undeploy soa,Danilo Schmiedel,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• How can I get nvidia-settings to work?

  - by Palace Chan

  I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >