Search Results

Search found 6352 results on 255 pages for 'media centers'.

Page 160/255 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• Ubuntu server 9.10 freezes up after ~10 minutes

  - by Matt Williamson

  I just upgraded my Ubuntu server from 9.04 to 9.10 and after about 10 minutes it locks up. It won't respond to ping, can't ssh in and the terminal doesn't accept keyboard input. It does not have X installed. I then reformatted and installed it from scratch with the same results. There are two hard drives, the first is for the OS and the second is for media. The second has not changed, it is an ext3 formatted drive with one partition. I stopped random services (samba, ushare, transmission-daemon) to see if they were causing the issue, but it still locked up. I did a watch "dmesg|tail" until it locked up, but I didn't see anything. How can I troubleshoot this further? I don't want to downgrade. Machine specs: Dell Dimension 3000 Pentium 4 @3GHz 512M RAM

  Read the article

• SBS 2003 R2 install errors

  - by piagetblix

  I just installed sbs2003 R2 as a learning lab box on my home network. The install seemed to take quit a while with a bit of shuffling between disks 4 and 5. The continue setup checklist showed the red x besides the exchange install and finally gave me an error about the "schema needing extending run, forest /adprep" and told me at the end that the install did not succeed. After a longer than normal reboot it comes up and seems to be OK. What logs do i need to check to see what went wrong? Should i reinstall and try burning the iso's to new media? cheers

  Read the article

• Batch Convert .mkv to .mp4

  - by IamHere

  I want to batch convert all .mkv files in a folder into .mp4 with VLC. It should use the original video-/audio stream and if possible the .ass subtitle of the .mkv. It's not really a conversion, it's more like changing the container – my player can't read the MKV videos. If I do this conversion by hand (manually) it works, but I have a lot of MKV files to convert, so it would take a lot of time. I have searched the internet for a batch file to do this and I found a few. I tried to modify them to my wish, but all attempts I tried just created a .mp4 file that doesn't contain the audio stream and the video stream also cannot be rendered by all my media players on the PC. So could someone tell me how the batch has to look like, so it works with the original video and audio stream (and maybe .ass subtitles)?

  Read the article

• MediaTemple DV SSL and Passenger

  - by pcasa

  Followed these instructions to get Passenger and media temple's apache talking to each other. http://greggoodwin.com/2009/03/01/install-ruby-on-rails-with-passenger-on-mediatemple-dv-35-how-to/ I have ssl_requirement installed and pages requesting SSL but can't figure out which .conf file gets edited and what to put in it. httpd.conf, vhosts.conf, ssl.conf, vhosts_ssl.conf? For what its worth where my vhosts.conf file is at, there is also a httpd.include that looks like it holds some info from certs created by Plesk. In there it says to create a /var/www/vhosts/sitename.com/conf/vhost_ssl.conf file for ssl. Currently I have vhosts.conf in /var/www/vhosts/sitename.com/conf/vhosts.conf And it looks like ServerAlias www.sitename.com DocumentRoot /var/www/vhosts/sitename.com/rails/sitename/public <Directory "/var/www/vhosts/sitename.com/rails/sitename/public"> Options FollowSymLinks AllowOverride None Order allow,deny RailsEnv development Allow from all </Directory> RailsBaseURI /

  Read the article

• Build number increment not reflected in AssemblyVersion

  - by awshepard

  I've browsed through some of the discussion on auto-incrementing build numbers, but in the impatience of youth decided to roll my own and re-invent the wheel. I know there are probably better ways to go about this (which I'm definitely going to investigate), but my question centers more around the Assembly and/or Version classes. My approach was to write a separate exe (BuildIncrementer) that takes a command line parameter for file name, does a regex match on the contents to grab the [assembly: AssemblyVersion...] string, do the modifications that I want (increment the build number, etc.), then write the contents back to the file. This approach works as-is. The next thing I did was in the project that I wanted to use this on, I set up a pre-build command line that is simply the command to execute that BuildIncrementer.exe on this project's AssemblyInfo.cs file. This too works, updating the assembly info as desired. The problem comes when I run the project, it sends an email containing the current version, obtained with Assembly.GetExecutingAssembly().GetName().Version.ToString(). BUT, the version showing up is the previous version. When my AssemblyInfo.cs says [assembly: AssemblyVersion("1.0.2.49667")], I get sent 1.0.1.45660, which was the previous build. Anyone have any ideas why that might be?

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• Visual Studio 2012 Installation fails on Windows 7

  - by Vipul

  I am trying to install Visual Studio 2012 on Windows 7 Home Premium 64-bit machine, but installation fails. I tried to install all version (premium, ultimate etc..) but getting below error. Machine is not domain joined and logged in as administrative user. I was using Security Essentials but turn it off before the installation. Installation source is from MSDN. Error log is too big to upload, important portion from the log: [2B6C:2580][2012-09-16T23:06:40]: MUX: ERROR: The type initializer for 'System.Windows.Media.FontFamily' threw an exception.

  Read the article

• How to find a hidden streaming video/audio link and record it

  - by Stan

  I've been using 'URL snooper' to find the hidden streaming url. And feed that url to VLC to record streaming video/audio. But the VLC can't read those url. Then I also found that the url is like a floating url that changes every several hours. So the same audio station won't have same url. The streaming audio provider has bunches of audio stations and shuffle the link frequently. Is there any way to record the streaming media in this case? Please advise, thanks.

  Read the article

• My Music Folder Appearing On Desktop

  - by Michael

  Hello, I use Windows 7 and have recently been encountering a problem with the My Music folder. I keep all my music on an external hard drive and use a third party program such as VLC to play albums. I also have a large list of single MP3s that I play in WinAmp. Neither of these cause any problem but whenever I play a song in the bundled Windows Media Player a new My Music shortcut appears on the desktop. WMP is my default player, I've tried changing it to other players but whenever I use WMP it still creates this shortcut. The My Music folder is empty as all music is stored on the external hard drive and I've set WMP to collate, store and retain no information about anything, so I don't think it's anything to do with playlist history or anything. Any ideas what might be happening? Any help in solving this annoyance is appreciated.

  Read the article

• Cloud based backup solutions based on open standards?

  - by Rick

  I am looking for a solution to backup and consolidate important media from a couple Windows laptops and Mac laptop. I would like a solutions that based on open standards, so my data isn't trapped by proprietary formats and proprietary protocols. I would like the ability to switch clients or change providers in the future. For example, something like Jungle Disk plus S3 sounds like a great option. However, I am having trouble confirming how or if this can be setup meeting this criteria. Are there any real or de-facto standards for treating S3 as a filesystem? If so, what Windows and Mac clients support these standards?

  Read the article

• Movie colors are off on ubuntu using Movieplayer?

  - by chris

  I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

  Read the article

• Need Help with fixing permissions in mounted Drive

  - by Master

  I am trying a lot still my problem is not solved. I have a partion called Server and inside it i have 5 folders like Folder 1 FOlder 2 Folder 3 I am mounting the drive on startup by using following command as told to me by some senoir members and it works but with some problems /dev/sdb1 /media/Server ntfs defaults,umask=006,fmask=000,dmask=007,uid=1000,gid=1001 0 0 The problem is with this command the permission are applied to all folders like Folder 1 , Folder 2 , FOlder3 But i want that only FOlder 3 should be publicly readable and writable while all other should be private and no one should have access to that. How can i achieve that

  Read the article

• Does an unmanaged 4/8-port GBit Ethernet switch with a GBIC port exist?

  - by Aaron Digulla

  I'm looking for a simple unmanaged switch with 4-8 GBit Ethernet ports and a fiber port (either as a GBIC slot or pre-installed with a 1000BASE-SX port). Does something like that exist? [EDIT] I want to connect to places in my home without drilling large holes though the floors. Therefore, I'm looking for a cheap way to connect two GBit switches via fiber. I tried with a media converter (GBit <- multimode fiber) but that costs about 50% throughput. So I was hoping that there is a cheap, small GBit switch which has a GBIC slot). All I found so far are very expensive managed switches with 12 or 24 ports for industry use.

  Read the article

• nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

  - by Sergey Osypchuk

  I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

  Read the article

• How to convert dvr-ms file in Ubuntu to DVD?

  - by edmicman

  I have a .dvr-ms file of a recorded TV show from my Vista Media Center. I would like to burn this to a DVD that can play on any standalone DVD player. My main PC that I want to use to convert it to a DVD format is running Ubuntu 10.04. I am able to play the file in Ubuntu using VLC (which surprised me) so I'm assuming I have what I need to decode it. I guess my questions are: What format do I need to convert this file to so that I could burn it to a playable DVD? I started to go through VLC's conversion process and chose I think H264 and AAC or something, and it gave a message about not having an AAC encoder. I'll look into that some more tonight, but is that something I could then burn to a DVD? Thanks for any help!

  Read the article

• HP ProLiant DL320e G8 v2 - USB2.0 during POST

  - by user3513346

  Initially my USB2.0 ports were working during POST (and boot). However, now they appear not to be. I first noticed this when I could not access the RBSU by pressing F9 during POST. Then found that I couldn't boot from USB either (I was able to do both of these initially). When performing the boot via iLo remote console I can access all of the setups (i.e., all of the F(X)'s) and can boot virtual media from a 'removable drive'. Keyboard works fine once the OS is booted. Not really sure what to try here. Any advice would be greatly appreciated. Thanks. Nick.

  Read the article

• Realtek HD Audio playing weird with certain video formats

  - by dyasny

  Hi, I have a Gigabyte motherboard with an onboard Realtek HD sound card. The card is working perfectly everywhere, except for a single video format, where the voice is distorted, sounds as if it's been passed through a metal tube. Been googling for this, but couldn't find an answer anywhere. The movie plays fine on other systems (got Linux everywhere else), but on this one (winXP-x64-sp2) it just doesn't. Here are some details: MPC: Type: KLCP WMV File Audio: 0x000a 22050Hz mono 20Kbps [Raw Audio 0] Video: Windows Media Video 9 400x300 29.97fps 227Kbps [Raw Video 1] VLC: Codec: wmas Sample rate: 22050 Bits per sample: 16 Bitrate: 20kb/s

  Read the article

• Can one build a single disk RAID 1 array?

  - by Core Xii

  I have an Nvidia hardware RAID 1 array and need to reformat. But I don't have any spare storage media, so I need to get along with the 2 disks in the array. I figured I'd do as follows: Delete the array, so I have 2 separate but identical disks, A and B, with my files Put disk B aside Reformat disk A, build RAID 1 array with it, install Windows XP Put disk B back in Boot to Windows on disk A, copy my files from disk B to disk A Add disk B to the RAID 1 array, rebuild array And now I'd have a new RAID 1 array, fresh install and all my files intact (the ones I copied). Here are the parts I'm unsure about: Can I build a RAID 1 array using just one disk, then add the other one later? Can Windows on disk A see disk B and allow me to copy my files over?

  Read the article

• Demangling typeclass functions in GHC profiler output

  - by Paul Kuliniewicz

  When profiling a Haskell program written in GHC, the names of typeclass functions are mangled in the .prof file to distinguish one instance's implementations of them from another. How can I demangle these names to find out which type's instance it is? For example, suppose I have the following program, where types Fast and Slow both implement Show: import Data.List (foldl') sum' = foldl' (+) 0 data Fast = Fast instance Show Fast where show _ = show $ sum' [1 .. 10] data Slow = Slow instance Show Slow where show _ = show $ sum' [1 .. 100000000] main = putStrLn (show Fast ++ show Slow) I compile with -prof -auto-all -caf-all and run with +RTS -p. In the .prof file that gets generated, I see that the top cost centers are: COST CENTRE MODULE %time %alloc show_an9 Main 71.0 83.3 sum' Main 29.0 16.7 And in the tree, I likewise see (omitting irrelevant lines): individual inherited COST CENTRE MODULE no. entries %time %alloc %time %alloc main Main 232 1 0.0 0.0 100.0 100.0 show_an9 Main 235 1 71.0 83.3 100.0 100.0 sum' Main 236 0 29.0 16.7 29.0 16.7 show_anx Main 233 1 0.0 0.0 0.0 0.0 How do I figure out that show_an9 is Slow's implementation of show and not Fast's?

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Encoding video stream for playback on a vanilla Windows XP with mencoder

  - by Tamás

  I have a bunch of PNG files, generated from a script. They represent consecutive frames of a video sequence and I'd like to encode them into a single AVI file (or some other video format) using mencoder. What parameters should I use to ensure that the video can be viewed on a vanilla Windows XP using Windows Media Player with no extra codecs installed apart from the default ones? So far I've tried -ovc lavc -lavcopts vcodec=wmv2 and -ovc lavc -lavcopts vcodec=msmpeg4 with no success. (Background story: some of the people I'm collaborating with on a scientific project cannot install any codecs on their university computers without the help of the local sysadmins, who are of course not very willing to install anything. I'd like to ensure that they can also view the video files I am creating).

  Read the article

• In Djano, why do I get a 500 server error when browsing, but "python mysite.fcgi" from SSH works fin

  - by Jim

  If I browse to my site, I get a 500 "internal server error." However, if I SSH into my server and go to my site's folder and run "python mysite.fcgi" I see the HTML rendered fine. Obviously, something is wrong, but I'm not sure what. Here is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteRule ^(media/.*)$ - [L] RewriteRule ^(static/.*)$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ mysite.fcgi/$1 [QSA,L] Here is my mysite.fcgi file: #!/usr/bin/python2.5 import sys, os sys.path.insert(0, "/kunden/homepages/34/[mydir]/htdocs/projects/django") sys.path.insert(1, "/kunden/homepages/34/[mydir]/lib/python/site-packages") os.chdir("/kunden/homepages/34/[mydir]/htdocs/projects/django/mysite") os.environ['DJANGO_SETTINGS_MODULE'] = 'mysite.settings' from django.core.servers.fastcgi import runfastcgi runfastcgi(["method=threaded", "daemonize=false"]) I'm setting this up on 1and1. It has been a pain, but I think I'm close.

  Read the article

• WinXP Movie Maker Codec Error

  - by Bob Rivers

  I'm trying to use Windows XP Movie Maker, but when I try to import an AVI video, it shows an error telling me that it wasn't import due to an the fact that the codec wasn't available (I'm able to see the video using the windows media player) First, the error message suggested to enable the option "download codecs automatically" under "tools options general". I did it. But know the error tells me that the codec wasn't available and, if I already installed it, I should reinitialize movie maker. I also already did it... The error msg is: The file D:\movie1.avi cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to import the file again. Any hints?

  Read the article

• How to install plug-in for Google Chrome

  - by Jeff

  Recently Google Chrome browser has been prompying me to install a plug-in everytime visit a web page. I always say Yes, install pulg-in, but that seems to have no effect. I tried following the "Trouble installing plug-ins" on the Chrome toolbar, but that seems to say Windows Media Player is the problem, but again, all my attempts at installing don't have any effect. As far as I know, I have not chnage anything, but Skype did recently upgrade itself. This is Windows 7 Professional 64-bit, and Chrome says it is up-to-date. I'm going to run a malware checker next, just in case - Thanks!

  Read the article

• How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >