Search Results

Search found 5171 results on 207 pages for 'whatever'.

Page 160/207 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• Android custom view - setting it to take up max space available but no more

  - by Rich

  I have a custom View class in my app that I'm using in xml layouts. Wherever I'm using this view in my xml, I don't want it to stretch it's container, but I want it to fill out whatever space is available. Here's an example to make it a little clearer. I have a LinearLayout set to horizontal orientation with my custom view followed by a TextView. The TextView is going to stretch the LinearLayout so that it takes up the space it needs and no more. I want my custom view to take up the vertical space that the TextView has made available. Let's say the TextView ends up being 50px tall because of it's contents. The LinearLayout is thus stretched to about this height (not taking into account any margins or padding), so I just want the view to know it can stretch to that height and not "push on" its container. Without overriding and of the measurement methods of the base class (onMeasure, etc) my View is actually stretching to take up as much space as possible. I have already played around with wrap_content and fill_parent a bunch, so I'm assuming I need to do something in one of the View class' measure methods.

  Read the article

• Emacs 23.2 opens a new window for each compile error/warning navigated to

  - by Grant Limberg

  I've recently upgraded from Carbon Emacs (v22.3) to vanilla Emacs 23.2 (from http://www.emacsformacosx.com). On Carbon Emacs when compiling a project, The frame is split in two with the current source file/SConscript in the top window, and the compile output in the bottom window. I'd hit C-x ` to navigate to the first warning or error in the compile output and it would replace whatever was in the top window with the source file the error or warning is in. In Emacs 23.2, however, a 3rd window is opened causing two windows open in the top half of the frame (split vertically) and the compile output in the window of the bottom half of the frame. How do I tell Emacs to not open a new window and instead open the code in the the existing non-compiler output window in the frame? A little further clarification on the behavior that I just noticed. If I hit C-x ` while the buffer containing the source file or SConscript file is active, no new window is opened. It's only if I'm manually navigating through the *compilation* buffer and hitting enter on an error or warning, or mouse clicking on a warning when a third buffer window appears.

  Read the article

• Saving HttpResponse/Request to file system

  - by chrisjlong

  Here is my scenario. User fills out this large page which is dynamically created based off DB values. Those values can change. When the user fills out the page and hits submit we want to save a copy of the page as html on the server, this way if the text or wording changes, when they go back to view their posted information, it is historically accurate. So I basically need to do this protected void buttonSave_Click(object sender, EventArgs e) { //collect information into an object to save it in the db bool result = BusinessLogic.Save(myBusinessObject); if (result) //!!! Here is where I need to save this page as an html file on my servers IFS!!!! else //whatever Response.Redirect("~/SomeOtherPage.aspx"); } Any help is greatly apprciated. Also I CANNOT just request the data from the url because query string parameters are a big no no in this case. The key to pull the database info up (at its highest level) is all in session so I cant just request a url and save it. Thanks!

  Read the article

• Book recommendation for Silverlight

  - by Mathias Weyel

  Hi there, yet another question for recommendations for a book on Silverlight. I look for a book that covers the UI and styling and, if possible, custom drawing and graphics. Very important for me is the style of the book - it should focus on the actual programming and not on where to click in Visual Studio to get things done. Let's take a fictional example for proper usage of the DataGrid control: Bad: To use the data grid, drag it from the toolbox onto the control. You can change the background color by clicking on “Background” in the properties. To define custom columns, click on columns and edit them in the configuration window that opens. Good: To use the DataGrid, you need a reference to the blah dll and declare the namespace in the XAML like this (blah), the data model should be like blah and if you want to define how the columns look like, you need to define them like this (more blah). And if you want to do this in C# because you for whatever reason aren’t able or willing to use XAML, this would look like blah. Bonus points for coverage of topics like how to manage resources (images/fonts) and internationalization. There are quite some snippets on how to do that on the internet but somehow each of them looks like they work but are not a proper way of doing it. cheers Mathias

  Read the article

• jQuery: preventDefault() not working on input/click events?

  - by Jason

  I want to disable the default contextMenu when a user right-clicks on an input field so that I can show a custom contextMenu. Generally speaking, its pretty easy to disable the right-click menu by doing something like: $([whatever]).bind("click", function(e) { e.preventDefault(); }); And in fact, I can do this on just about every element EXCEPT for input fields in FF - anyone know why or could point me towards some documentation? Here is the relevant code I am working with, thanks guys. HTML: <script type="text/javascript"> var r = new RightClickTool(); </script> <div id="main"> <input type="text" class="listen rightClick" value="0" /> </div> JS: function RightClickTool(){ var _this = this; var _items = ".rightClick"; $(document).ready(function() { _this.init(); }); this.init = function() { _this.setListeners(); } this.setListeners = function() { $(_items).click(function(e) { var webKit = !$.browser.msie && e.button == 0; var ie = $.browser.msie && e.button == 1; if(webKit||ie) { // Left mouse...do something() } else if(e.button == 2) { e.preventDefault(); // Right mouse...do something else(); } }); } } // Ends Class

  Read the article

• What does ~ in the beginning of an URL in asp.net exactly do ?

  - by MarceloRamires

  I am editing a certain website which before used the port 80 (default) that was not required at the url (because it's default..) But the port had (for technical reasons) to be changed, and now it has to be informed. I can access the main page through ip:port\page like this: 1.2.3.4:81\page.aspx Every link in the website is composed like this: <asp:HyperLink runat="server" Text="random" NavigateUrl="~/fdr/whatever.aspx" /> And whenever I click on a link, the page doesn't load, but the URL is composed on the URL bar of the browser, then I simply add ":80" after the IP in the URL and it works. Due to the existance of querystrings (in other words, for already having access to the URL) I before thought that '~' in the beginning of a URL in a link was saying "keep in the same website, just change to this webpage in this folder", but if the port vanishes, I assume now that the address is requested (probably to IIS) the location of the current website. I want to know then (instead of having to add the port to each link in my website) how do I set up whoever is requested by the ~ in the link to add the port somehow. How do I do that?

  Read the article

• R:how to get grep to return the match, rather than the whole string

  - by Mike Dewar

  Hi, I have what is probably a really dumb grep in R question. Apologies, because this seems like it should be so easy - I'm obviously just missing something. I have a vector of strings, let's call it alice. Some of alice is printed out below: T.8EFF.SP.OT1.D5.VSVOVA#4 T.8EFF.SP.OT1.D6.LISOVA#1 T.8EFF.SP.OT1.D6.LISOVA#2 T.8EFF.SP.OT1.D6.LISOVA#3 T.8EFF.SP.OT1.D6.VSVOVA#4 T.8EFF.SP.OT1.D8.VSVOVA#3 T.8EFF.SP.OT1.D8.VSVOVA#4 T.8MEM.SP#1 T.8MEM.SP#3 T.8MEM.SP.OT1.D106.VSVOVA#2 T.8MEM.SP.OT1.D45.LISOVA#1 T.8MEM.SP.OT1.D45.LISOVA#3 I'd like grep to give me the number after the D that appears in some of these strings, conditional on the string containing "LIS" and an empty string or something otherwise. I was hoping that grep would return me the value of a capturing group rather than the whole string. Here's my R-flavoured regexp: pattern <- (?<=\\.D)([0-9]+)(?=.LIS) nothing too complicated. But in order to get what I'm after, rather than just using grep(pattern, alice, value = TRUE, perl = TRUE) I'm doing the following, which seems bad: reg.out <- regexpr( "(?<=\\.D)[0-9]+(?=.LIS)", alice, perl=TRUE ) substr(alice,reg.out,reg.out + attr(reg.out,"match.length")-1) Looking at it now it doesn't seem too ugly, but the amount of messing about it's taken to get this utterly trivial thing working has been embarrassing. Anyone any pointers about how to go about this properly? Bonus marks for pointing me to a webpage that explains the difference between whatever I access with $,@ and attr.

  Read the article

• Why can't I build this Javascript object?

  - by Alex Mcp

  I have an object I'm trying to populate from another object (that is, iterate over a return object to produce an object with only selected values from the original). My code looks like this: var collect = {}; function getHistoricalData(username){ $.getJSON("http://url/" + username + ".json?params", function(data){ for (var i=0; i < data.length; i++) { console.log(i); collect = { i : {text : data[i].text}}; $("#wrap").append("<span>" + data[i].text + "</span><br />"); }; console.log(collect); }); } So I'm using Firebug for debugging, and here's what I know: The JSON object is intact console.log(i); is showing the numbers 1-20 as expected When I log the collect object at the end, it's structure is this: var collect = { i : {text : "the last iteration's text"}}; So the incrementer is "applying" to the data[i].text and returning the text value, but it's not doing what I expected, which is create a new member of the collect object; it's just overwriting collect.i 20 times and leaving me with the last value. Is there a different syntax I need to be using for assigning object members? I tried collect.i.text = and collect[i].text = and the error was that whatever I tried was undefined. I'd love to know what's going on here, so the more in-depth an explanation the better. Thanks!

  Read the article

• "Link" against a SWC in Flex

  - by ggambett

  I'm trying to do a very simple app in Flash/Flex, that loads an image embedded in the swf itself and then shows it. The thing is I'm trying to do it using the command line only (mxmlc and compc) and without using @Embed, and failing miserably. I have a very simple Main.as : package { import flash.display.*; import flash.utils.*; public class Main extends Sprite { public function Main () : void { var pDef:Class = getDefinitionByName("icon_big.png") as Class; var _image:BitmapData = new pDef(0, 0); var pSprite:Sprite = new Sprite(); pSprite.graphics.beginBitmapFill(_image); pSprite.graphics.drawRect(0, 0, _image.width, _image.height); pSprite.graphics.endFill(); addChild(pSprite); } } } This works fine if I add icon_big.png to the Library using the Flash IDE, but I can't figure out how to do it from the command line. I'm using compc to put the png inside a swc : compc --include-file icon_big.png icon_big.png -output assets.swc This generates a 17 kb assets.swf, slightly bigger than icon_big.png. Then I try to compile and link Main.as : mxmlc -include-libraries+=assets.swc Main.as This produces a 944 byte Main.swf, which clearly doesn't include the asset, and fails at runtime. According to the mxmlc docs I found, -include-libraries should link with every class, including the ones not directly referenced by code (as is the case here, since I'm getting the class from code), and it unsurprisingly fails at runtime. Note that this same code (or, more precisely, quite equivalent code) works when used within a Flash project - I'm not looking to fix the code, but how to do in the command line whatever Flash does internally. I feel I'm just "not getting" something... any clues?

  Read the article

• WPF - Why doesn't Microsoft supply a decent set of most-used controls ?

  - by IUsedToBeAPygmy

  I've been playing with WPF for some months now, and I quite like it. But one of the things I don't get is why MS doesn't put a little more effort in helping developers by supplying basic controls, and I need to get this off my chest :) For example, I figure most applications somewhere will need to let you edit some properties - for configuration or whatever. What would be the most used types in a proprety-grid editor ? text numbers (byte, float/double, int, etc) colors ....etc. So why isn't there even something as simple as a control to edit numbers ? Like a generic NumericUpDown control that allows you to type in numbers (no text, no pasting invalid input) or spin them up/down according to some given rules (decimal, floating point, min/maxvalue) ? Why isn't there a generic colorpicker, so people get the same user-experience in every application ? Why isn't there a standard implementation of a SearchTextBox, a BreadCrumb-control, or all these other standard control types users have gotten accustomed to the last 10 years ? (..but at least they DID have the time to implement a generic splashscreen - because everyone knows that greatly increases user-productivity....) The well-known ideal is always to give people the same user-experience over different applications. So even if some of those controls would be easy to make - it would be preferred to have one version over different applications. I see people all over the internet trying to do the same stuff over and over again. Okay, so MS started a WPF Toolkit project on Codeplex that tries to implement some controls, but only did so half-heartedly and is completely dead by now (last update of the roadmap dates back to Mar 21 2009). The result of this is that a lot of people starting a WPF-project end up spending a lot of time on trying to figure out how to create some generic controls and get really frustrated. Wasn't the mantra "Developers, developers, developers!" ..? /Rant

  Read the article

• How do I prevent a C# method from executing using an attribute validator?

  - by Boydski

  I'd like to create an attribute-based validator that goes a few steps beyond what I've seen in examples. It'll basically prevent methods or other functionality from executing. Please be aware that I'm having to use AzMan since I have no availability to Active Directory in this scenario. Here's some pseudo code of what what I'm looking for: // Attribute validator class AttributeUsage is arbitrary at this point and may include other items [AttributeUsage( AttributeTargets.Method | AttributeTargets.Property, AllowMultiple = true, Inherited = true )] public class PermissionsValidatorAttribute : Attribute { public PermissionsValidatorAttribute(PermissionEnumeration permission){...} public bool UserCanCreateAndEdit(){...} public bool UserCanDelete(){...} public bool UserCanUpload(){...} } Here's a sample of a class/member that'll be decorated. The method will not be executed at all if the PermissionValidator.UserCanDelete() doesn't return true from wherever it's executed: public class DoStuffNeedingPermissions { [PermissionValidator(PermissionEnumeration.MustHaveDeletePermission)] public void DeleteSomething(){...} } I know this is a simple, incomplete example. But you should get the gist of what I'm needing. Make the assumption that DeleteSomething() already exists and I'm preferring to NOT modify the code within the method at all. I'm currently looking at things like the Validation Application Block and am messing with custom attribute POC's. But I'd love to hear opinions with code samples from everyone out there. I'm also certainly not opposed to other methods of accomplishing the same thing such as extension methods or whatever may work to accomplish the same thing. Please remember I'm making the attempt to minimize changes to existing DoStuffNeedingPermissions code. Thanks everyone!

  Read the article

• How to mark array value types in PHP (Java)Doc?

  - by Christian Sciberras

  It might be a bit difficult to explain, so I'll give some example code. Note that I'm using NetBeans IDE (latest). class Dummy { public function say(){ } } /** * Builds dummy class and returns it. * @return Dummy The dummy class. */ function say_something(){ return new Dummy(); } $s=say_something(); While developing in netbeans I can invoke auto-complete by hitting ctrl+space after typing "$s-". In the the hint window that follows, there is the item "say()". This is because the javadoc says say_something returns a Dummy and NetBeans parsed Dummy class to know that it has a method called "say()". So far so good. My problem is with arrays. Example code follows: /** * Builds array of 2 dummy classes and returns it. * @return Array The dummy class. (*) */ function say_something2(){ return array(new Dummy(),new Dummy()); } $s=say_something2(); If I try the auto-complete thing again but with "$s[0]-" instead, I don't get the methods fro Dummy class. This is because in the JavaDoc I only said that it is an array, but not the values' type. So the question would be, is there any JavaDoc syntax, cheat, whatever which allows me to tell JavaDoc what type of variables to expect in an array?

  Read the article

• javascript plugin - singleton pattern?

  - by Adam Kiss

  intro Hello, I'm trying to develop some plugin or/*and* object in javascript, which will control some properties over some object. It will also use jQuery, to ease development. idea This is in pseudocode to give you an idea, since I can't really describe it in english with the right words, it's impossible to go and use google to find out what I want to use (and learn). I will have plugin (maybe object?) with some variables and methods: plugin hideshow(startupconfig){ var c, //collection add: function(what){ c += what; }, do: function(){ c.show().hide().stop(); //example code } } and I will use it this way (or sort-of): var p = new Plugin(); p .add($('p#simple')) .add($('p#simple2')) .do(); note I'm not really looking for jQuery plugin tutorials - it's more like usage of singleton pattern in document in javascript, jQuery is mentione only because it will be used to modify dom and simplify selectors, jQuery plugin maybe just for that one little function add. I'm looking for something, that will sit on top of my document and call functions from itselft based on timer, or user actions, or whatever. problems I don't really know where to start with construction of this object/plugin I'm not really sure how to maintain one variable, which is collection of jQuery objects (something like $('#simple, #simple2');) I would maybe like to extedn jQuery with $.fn.addToPlugin to use chaining of objects, but that should be simple (really just each( p.add($(this)); )) I hope I make any sense, ideas, links or advices appreciated.

  Read the article

• How do I get Ctrl-Backspace to delete a word in vim within gnome-terminal?

  - by Michael Gundlach

  I'd like Ctrl-Backspace to delete the current word in vim insert mode. From within xterm I can pull this off via :inoremap <C-H> <C-W> but in gnome-terminal I cannot figure out a way to make it happen. When in vim insert mode, if I type control-v and then press backspace, I get ^H in xterm, and ^? in gnome-terminal. Unfortunately, :inoremap <C-?> <C-W> doesn't do the trick in gnome-terminal; control-backspace just erases a single character no matter what. Regarding ASCII codes: Gnome-terminal lets you change the backspace character under Edit - Profile Preferences - Compatibility. Unfortunately, no option works, as far as I can tell: whatever character I apply to Backspace via the settings, if I try mapping the character itself, like :inoremap <C-H> <C-W> then regular backspace and control-backspace both erase an entire word; and if I try mapping control plus that character, like :inoremap <C-^H> <C-W> then regular backspace and control-backspace just erase a single character.

  Read the article

• How to get height for NSAttributedString at a fixed width

  - by bonaldi

  I want to do some drawing of NSAttributedStrings in fixed-width boxes, but am having trouble calculating the right height they'll take up when drawn. So far, I've tried: Calling - (NSSize) size, but the results are useless (for this purpose), as they'll give whatever width the string desires. Calling - (void)drawWithRect:(NSRect)rect options:(NSStringDrawingOptions)options with a rect shaped to the width I want and NSStringDrawingUsesLineFragmentOrigin in the options, exactly as I'm using in my drawing. The results are ... difficult to understand; certainly not what I'm looking for. (As is pointed out in a number of places, including this Cocoa-Dev thread). Creating a temporary NSTextView and doing: [[tmpView textStorage] setAttributedString:aString]; [tmpView setHorizontallyResizable:NO]; [tmpView sizeToFit]; When I query the frame of tmpView, the width is still as desired, and the height is often correct ... until I get to longer strings, when it's often half the size that's required. (There doesn't seem to be a max size being hit: one frame will be 273.0 high (about 300 too short), the other will be 478.0 (only 60-ish too short)). I'd appreciate any pointers, if anyone else has managed this.

  Read the article

• Is this the right way to organize my database tables?

  - by Moss

  So I'm making a website that allows users to build contact lists. So their are users, the users have lists, and the lists have contacts. It seems to me that I need 3 tables for this but I just want to make sure. There would be a User table of course, and then a "List of Lists" table that has the username, and listname, as primary key along with whatever other info we want to attach to the lists as a whole. Finally, for lack of a better word, the List table which would again have the username/listname p.k., then the contact ID and notes and such that the user attaches to that contact on that specific list. I hope that is a clear explanation. For some reason I feel unsure about this arrangement. For one thing if the website becomes popular the List table could swell to billions of rows. And it also feels a little weird that everybody's list info is all jumbled up in the same table. I suppose I could create separate tables for each user and even for each list but that seems like a bad idea for other reasons. My db explanation assumes I can use foreign keys on my tables which at the moment isn't actually an option. If I can't get InnoDB tables enabled I will probably use ID's for the lists instead of depending on a compound key. Maybe I should do this anyway?

  Read the article

• Can I automatically throw descriptive exceptions with parameter values and class feild information?

  - by Robert H.

  I honestly don't throw exceptions often. I catch them even less, ironically. I currently work in shop where we let them bubble up to avicode. For whatever reason, however, avicode isn't configured to capture some of the critical bits I need when these exceptions come bouncing back to my attention. Specifically, I'd like to see the parameter values and the class’s field data at the time of the exception. I’d guess with the large suite of .Net services that I could create a static method to crawl up the stack, gather these bits and store them in a string that I could stick in my exception message. I really don't are how long such a method would take to execute as performance is no longer a concern when I hit one of these scenarios. If it's possible, I'm sure someone has done it. If that's the case, I'm having a hard time finding it. I think any search containing "exception" brings back too many resutls. Anyway, can this be done? If so, some examples or links would be great. Thanks in advance for your time, Robert

  Read the article

• ODBC and NLS_LANG

  - by Michael S.

  Let's say that I've created two different program executables, e.g. in C++. For some reason, the two programs internals representation of text are different from each other. Let's say the first program is using text representation A and the other text representation B. It could be a specific 8-bit ANSI codepage, Unicode/UTF-8 or Unicode/UTF-16 or whatever. Now each program want to communicate text (add/retrieve data) to/from the same database table on a (database) server. Each program communicates with the database through ODBC. So the programs do not know what database system they they are communicating with. In this specific case through the database is actually a Oracle RDMS database and the database server administrator has setup the database to use UTF-8. On the system on which the programs are running an appropriate ODBC driver is available, so that the programs can connect through ODBC. Each program will treat and convert from the ODBC data type SQL_C_CHAR to its internal text representation appropriately. I assume that the programs cannot do no other than to assume a specific encoding returned for SQL_C_CHAR text. If not the programs has to be told which encoding that is. For Oracle, I know that the NLS_LANG environment variable can be used on the client. I assume it affects the ODBC driver (related to SQL_C_CHAR) to convert from a specific encoding (as given by NLS_LANG) to the internal encoding of the database (in this example UTF-8) and vice-versa. If the machine running my programs are having a NLS_LANG this setting will affect the byte sequences returned for SQL_C_CHAR so my programs cannot suddenly assume a specific encoding for the text returned via SQL_C_CHAR. Is it possible to setup the ODBC connection (preferably programmatically at runtime), so that it takes care of text conversions appropriately for the two programs, i.e. from/to representation to/from UTF-8 and from/to representation B to/from UTF-8? Regards, /Michael PS. As the programs are connecting through ODBC I don't think it would be nice that they should now anything about NLS_LANG as this is a Orcacle specific environment variable.

  Read the article

• Inconsistent height of text input elements between Firefox and WebKit

  - by Trevor Burnham

  OK, I realize that this is something of an eternal question, but here goes: I've got a single text input, <input type="text" name="whatever" /> and I've specified its font-family, font-size and padding. Yet, even on the same machine (my Mac, let's say), the input has a different height in Firefox (3.6) than it does in Chrome or Safari. Specifically, Firefox adds a little bit more padding below the text. And no, specifying height in pixels doesn't achieve consistency either. Is there any way to achieve text input height consistency across Gecko- and WebKit-based browsers (let alone IE and Opera) without resorting to JavaScript? And if I must use JavaScript, has someone already devised a jQuery plugin or something to easily do this? Update: Here's what not to do. The jqTransform plugin lets you skin form elements and promises that they'll look the same across browsers. Here's how the demo input looks in Chrome 5 on my Mac: and here's how the same input looks in Firefox 3.6.4: I haven't altered these screenshots in any way, just cropped them. Now, my first reaction is, "Ugh, I don't want to support Firefox." But there are currently more Firefox users than Safari and Chrome users combined, so that's not an option. Someone, please help! I just want my forms to look the same across modern, standards-compliant browsers! And by "look the same," I'm not talking about the outline on selection or anything like that; I'm just talking about having the same width, height, and text placement!

  Read the article

• Query notation for the sitecore 'source' field in template builder

  - by M.R.

  I am trying to set the the source field of a template using the query notation (or xpath - whichever works), but none of them seems to be working. My content tree is a multisite content tree: France --Page 1 ----Page1A -------Page1AA --Page 2 --Page 3 --METADATA ----Regions US --Page 1 ----Page1A -------Page1AA --Page 2 --Page 3 --METADATA ----Regions Each site has its own METADATA folder, and I want it so that when adding a page inside each of the main country nodes, I want the values to reflect whatever is in the METADATA of that site. I have two different fields for now - a droplink and a treelistex field. So I thought I can just get the parent item that is a country site, and get the metadata folder for that. When I put the following query in both the fields, I get different results: query:./ancestor::*[@@templatename='CountryHome']/METADATA/Regions/* For the droplink field, I get only the first Region (one item) For the treelistex field, I get the entire content tree I then tried to modify the query a little bit and took the 'query' notation out ./ancestor::*[@@templatename='CountryHome']/METADATA/Regions/* If I go to the developer center/xpath builder, and set the context node to any item underneath the main country site, it returns me exactly what I need, but when I put this in the source, I get the entire content tree in both the cases. Help!

  Read the article

• Using the Proxy pattern with C++ iterators

  - by Billy ONeal

  Hello everyone :) I've got a moderately complex iterator written which wraps the FindXFile apis on Win32. (See previous question) In order to avoid the overhead of constructing an object that essentially duplicates the work of the WIN32_FIND_DATAW structure, I have a proxy object which simply acts as a sort of const reference to the single WIN32_FIND_DATAW which is declared inside the noncopyable innards of the iterator. This is great because Clients do not pay for construction of irrelevant information they will probably not use (most of the time people are only interested in file names), and Clients can get at all the information provided by the FindXFile APIs if they need or want this information. This becomes an issue though because there is only ever a single copy of the object's actual data. Therefore, when the iterator is incrememnted, all of the proxies are invalidated (set to whatever the next file pointed to by the iterator is). I'm concerned if this is a major problem, because I can think of a case where the proxy object would not behave as somebody would expect: std::vector<MyIterator::value_type> files; std::copy(MyIterator("Hello"), MyIterator(), std::back_inserter(files)); because the vector contains nothing but a bunch of invalid proxies at that point. Instead, clients need to do something like: std::vector<std::wstring> filesToSearch; std::transform( DirectoryIterator<FilesOnly>(L"C:\\Windows\\*"), DirectoryIterator<FilesOnly>(), std::back_inserter(filesToSearch), std::mem_fun_ref(&DirectoryIterator<FilesOnly>::value_type::GetFullFileName) ); Seeing this, I can see why somebody might dislike what the standard library designers did with std::vector<bool>. I'm still wondering though: is this a reasonable trade off in order to achieve (1) and (2) above? If not, is there any way to still achieve (1) and (2) without the proxy?

  Read the article

• How can I implement a volume meter for a song currently playing? (iPhone OS 3.1.3)

  - by Adam

  Hi i'm very new to core audio and I just would like some help in coding up a little volume meter for whatever's being outputted through headphones or built-in speaker. Like a dB meter. I have the following code, and have been trying to go through the apple source project "SpeakHere", but it's a nightmare trying to go through all that, without knowing how it works first... Could anyone shed some light? Here's the code I have so far... (void)displayWaveForm { while (musicIsPlaying == YES { NSLog(@"%f",sizeof(AudioQueueLevelMeterState)); } } (IBAction)playMusic { if (musicIsPlaying == NO) { NSURL *url = [NSURL fileURLWithPath:[NSString stringWithFormat:@"%@/track7.wav",[[NSBundle mainBundle] resourcePath]]]; NSError *error; music = [[AVAudioPlayer alloc] initWithContentsOfURL:url error:&error]; music.numberOfLoops = -1; music.volume = 0.5; [music play]; musicIsPlaying = YES; [self displayWaveForm]; } else { [music pause]; musicIsPlaying = NO; } }

  Read the article

• populating one checkedlistbox with another (checkedlistbox)

  - by 8thWonder

  I am having difficulties populating a checkedlistbox (CLB) based on the selection(s) made in another. It should also be noted that I have a "Select All" checkbox at the top that checks/unchecks all of the items in the first CLB. Here's the code: Private Sub chkSelectAll_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chkSelectAll.CheckedChanged For i As Integer = 0 To clb1.Items.Count - 1 clb1.SetItemChecked(i, chkSelectAll.Checked) Next End Sub Private Sub clb1_ItemCheck(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles clb1.ItemCheck Dim i As Integer = clb1.SelectedIndex For j As Integer = 0 To al_2.Count - 1 If i = -1 Then For k As Integer = 0 To al_2.Count - 1 If Not clb2.Contains(al_2(k).sDate) Then clb2.Items.Add(al_2(k).sDate) Else : k += 1 End If Next ElseIf (e.NewValue = CheckState.Checked And al_2(j).sName = al_1(i)) Then clb2.Items.Add(al_2(j).sDate) ElseIf (e.NewValue = CheckState.Unchecked And al_2(j).sName = al_1(i)) Then clbProdBkups.Items.Remove(al_2(j).sDate) End If Next End Sub The first CLB is populated with an arraylist of values on the button click event. Based on whatever is checked in the first CLB, corresponding values from an arraylist of structures should fill the second CLB. The following code partially works until the "Select All" checkbox is clicked at which point one of two things happens: If other values have been selected before "Select All" is checked, the second CLB is filled with the correct number of corresponding values BUT only those of the most recently selected item of the first CLB instead of all of corresponding values of all of the items that were not already selected. When "Select All" is unchecked, the most recently incorrect values are removed, everything in CLB 1 is unchecked but the values in CLB 2 that were selected before "Select All" was checked remain. If "Select All" is checked before anything else is selected, I get an "unable to cast object of type 'System.String' to type 'System.Windows.Forms.Control'" error that points to the following statement from the itemcheck event: If Not clb2.Contains(al_2(k).sDate) Then Any insights will be greatly appreciated. ~8th

  Read the article

• JSP: How can I still get the code on my error page to run, even if I can't display it?

  - by Josh Hinman

  I've defined an error-page in my web.xml: <error-page> <exception-type>java.lang.Exception</exception-type> <location>/error.jsp</location> </error-page> In that error page, I have a custom tag that I created. The tag handler for this tag e-mails me the stacktrace of whatever error occurred. For the most part this works great. Where it doesn't work great is if the output has already begun being sent to the client at the time the error occurs. In that case, we get this: SEVERE: Exception Processing ErrorPage[exceptionType=java.lang.Exception, location=/error.jsp] java.lang.IllegalStateException I believe this error happens because we can't redirect a request to the error page after output has already started. The work-around I've used is to increase the buffer size on particularly large JSP pages. But I'm trying to write a generic error handler that I can apply to existing applications, and I'm not sure it's feasible to go through hundreds of JSP pages making sure their buffers are big enough. Is there a way to still allow my stack trace e-mail code to execute in this case, even if I can't actually display the error page to the client?

  Read the article

• Method of transforming 3D vectors with a matrix

  - by Drew Noakes

  I've been doing some reading on transforming Vector3 with matrices, and am tossing up digging deeper into the math and coding this myself versus using existing code. For whatever reason my school curriculum never included matrices, so I'm filling a gap in my knowledge. Thankfully I only need a few simple things, I think. Context is that I'm programming a robot for the RoboCup 3D league. I'm coding it in C# but it'll have to run on Mono. Ideally I wouldn't use any existing graphics libraries for this (WinForms/WPF/XNA) as all I really need is a neat subset of matrix transformations. Specifically, I need translation and x/y/z rotations, and a way of combining multiple transformations into a single matrix. This will then be applied to my own Vector3 type to produce the transformed Vector3. I've read different advice about this. For example, some model the transformation with a 4x3 matrix, others with a 4x4 matrix. Also, some examples show that you need a forth value for the vector's matrix of 1. What happens to this value when it's included in the output? [1 0 0 0] [x y z 1] * [0 1 0 0] = [a b c d] [0 0 1 0] [2 4 6 1] The parts I'm missing are: What sizes my matrices should be Compositing transformations by multiplying the transformation matrices together Transforming 3D vectors with the resulting matrix As I mostly just want to get this running, any psuedo-code would be great. Information about what matrix values perform what transformations is quite clearly defined on many pages, so need not be discussed here unless you're very keen :)

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >