Search Results

Search found 13264 results on 531 pages for 'intel mac'.

Page 161/531 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

  • Connecting to a 2.5" laptop drive using USB

    - by user27449
    So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

    Read the article

  • Do I need the meta-key for vim?

    - by Riyaah
    I'm looking in to learning emacs or vim. I started out with emacs but found the need for a meta key to be a hassle, especially since I have a non-english keyboard layout on my macbook. So far I haven't seen any references to meta in vim, so my question is: Can I live without meta in vim? If so that'll settle the vim vs. emacs question for me, otherwise I'll just have to learn to live with some workaround.

    Read the article

  • Snapshots are disappearing from Time Machine. Why?

    - by AntonAL
    I have TimeMachine enabled for my external HDD. I'm triggering backups manually 2 times per week. I have noticed, that some snapshots, that i made, are gone. I noticed this behaviour several weeks later, but i had doubts. To make it sure, i've recorded screen video with listing snapshots in TimeMachine. After watching my screen recording today, I'm sure, that for Augusut i had 9 snapshots. Now, i have only 3 of them. What's happening ? I had no crash disk reports, errors etc

    Read the article

  • What are your most useful textexander (or similar) snippets?

    - by P.Bjorklund
    Textexpander is a program that aims to save you time by auto-replacing snippets of text with the content of your choice, or to quote their Web site: "Save yourself time and effort by typing short abbreviations for frequently-used text and images." So for instance when you type ,h1 it will change it to <h1></h1> with the cursor placed between the <. After some searching I have yet to find a resource/forum-thread/whatnot that discuss the uses of this marvelous program. I am therefor looking for your best snippets or a link to a resource where I can find this. Oh and one thing I can think of right away is sigw, sigp for my work/personal email signature.

    Read the article

  • Different Wallpaper if two monitors are attached

    - by bitboxer
    I am working on my MacBook Pro. In the office I have 1 27" Monitor attached to it, at home I tend to work without an second monitor. For that setup I want to change the wallpaper if no 2nd monitor is attached. Is there a app that helps me do that? Can I do this with applescript without manual activating that script?

    Read the article

  • Any way to disable specific CPU idle (Cx) states?

    - by Philippe
    I just got a new Toshiba Tecra S11 notebook, which has a Core i5 520M CPU, and it appears to suffer from a well-known problem: a high pitched noise when the CPU is idle. Googling around revealed that this is caused by a specific power-saving mode in the CPU. In most cases, C4 mode is blamed for the noise. So my question is: is it possible to disable C4 mode (or any other "sleep" mode) using some utility or BIOS setting? I don't mind if it hurts battery life. I'd appreciate any advice on this matter. It's driving me crazy. FYI: I'm running Windows 7 64-bit

    Read the article

  • For web development which is more important - CPU and Graphics card OR Ram and SSD Harddrive?

    - by adam
    Buying a laptop is always hard work and questions about specific models dont age well on forums. A popular dilema (especially with apple macbooks) is whether to spend more for a faster cpu and graphics card but settle for standard ram and hd OR drop down and spend the savings on more ram and a faster harddrive such as a ssd. Im wondering for web development i.e. ide, unit tests, photoshop work and some user testing screen capturing now and again what would provide better performance. ( No games, music production or spielberg standard video editing.) For examples sake the current apple lineup for their 15inch macbookpros. 2.66 cpu i7 4gb ram 5400rpm drive 4gig ram vs 2.4 cpu i5 8gb ram 124gb sdd roughly the same price.

    Read the article

  • How to remove file permissions from an external hard drive?

    - by user2540416
    My macbook recently died and I am currently trying to figure out how to copy my data. What I did was, I took out the hard drive, put it in an enclosure and plugged it in to my other laptop that runs linux. The problem is, I cannot copy files from the hard drive due to file permissions. I tried to access the hard drive as root. But I still cannot copy files. How do I remove file permissions from the harddrive?

    Read the article

  • Alternative to Xcode [closed]

    - by Moshe
    For those familiar with Windows, I used to use "Programmer's Notepad" and "TextPad". I want a Text Editor, not an IDE, with the following few features (in no particular order): Syntax Highlighting Tabbed editing Projects (groups of files together in one "project" file) Spellcheck Lightweight - I prefer something other than Xcode. Updates I am looking for something primarily for web development. Must be Free. +1 For relevant link(s). GUI Based only Conclusion I realized that gEdit is available for OS X. I met it back on Ubuntu 6. Something-or-other. We have a winner. all for input.

    Read the article

  • Don't show hidden applications when using Command-Tab

    - by ash
    Hi, I'm wondering if there's a way to not show hidden applications in the list of running apps when using Command-Tab ? LiteSwitch (http://www.proteron.com/) sort of does what I want, except it grays out hidden applications, but I want them to not appear at all. I use hidden applications as a sort of 'I'll get to later, or don't bother me now' method, so it would be great if Command-Tab could honor that (the same was Expose does). Thanks.

    Read the article

  • What are your most useful textexpander (or similar) snippets?

    - by P.Bjorklund
    Textexpander is a program that aims to save you time by auto-replacing snippets of text with the content of your choice, or to quote their Web site: "Save yourself time and effort by typing short abbreviations for frequently-used text and images." So for instance when you type ,h1 it will change it to <h1></h1> with the cursor placed between the <. After some searching I have yet to find a resource/forum-thread/whatnot that discuss the uses of this marvelous program. I am therefore looking for your best snippets or a link to a resource where I can find this. Oh and one thing I can think of right away is sigw, sigp for my work/personal email signature.

    Read the article

  • Restore only one partition of Windows Backup

    - by VitoShadow
    I have a MacBook Pro with an HD partitioned. This HD was divided in two partitions: the first was about 650 GB, with OS X installed, and the second one (created with BootCamp Assistant) was about 100 GB, with Windows 7 installed. I needed more space for Windows, so I decided to backup the Windows partition using the Windows backup tool, from Control Panel. I created an image of my partition, stored it in an external HD, and now I'm trying to use it. In order to give more space to Windows, I formatted the HD, and recreate a new partition table, with the first partition of about 250 GB (with OS X) and the second of the exactly size of the previous partition in which was installed Windows (about 100 GB); thre rest was empty space. In the second, I tried to restore the Windows backup. I plugged in the Windows Installation CD (with the HD with the backup connected to the computer), and select the option "Repair your computer". Then, I choose the image of the backup (automatically recognized), and I try to restore it. The problem is that now the System Recovery Tool wants to format all the HD, in order to install only Windows! In this way, I should lose everything, also the MacOS partition! Is there a way to install the backup only in the Windows partition?

    Read the article

  • How to exchange the HDD of a MacBook Pro?

    - by Another Registered User
    I've bought an Solid State Drive (SSD) for my MacBook Pro, and now I need to exchange it somehow. Would this strategy work? 1) Create an backup with Time Machine (Snow Leopard) 2) Then replace the old HDD 3) Insert the new HDD 4) Install Snow Leopard (same version as previously used) 5) Open up Time Machine, and recover from the last backup I'm not sure about how to do the last part. Is that hard? What are the neccessary steps? Or is there a better way? Maybe I don't need to re-install Snow Leopard completely? Maybe the Install CD already offers an option to recover from Backup?

    Read the article

  • Enable wireless on Dell Inspiron 1300

    - by Simon
    As per subject, I've looked at various resources and attempted ndiswrapper solutions, found a one-click solution that lead to a 404 and this but none works. I've run all updates. Once I managed to lose my wired connection as well and had to reinstall. This is my first hour with Linux. iwconfig gives this before I do anything: lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extens Thanks for responding lspci returns 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 30000000-301fffff Prefetchable memory behind bridge: 0000000030200000-00000000303fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfc00000-dfdfffff Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dfb00000-dfbfffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Kernel driver in use: ata_piix 02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 18 Region 0: Memory at dfbfc000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 Kernel modules: b44 02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Subsystem: Dell Wireless 1370 WLAN Mini-PCI Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfbfe000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge Kernel modules: ssb and the rfkill shows 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Just checking addtional drivers. Says no additional driver installed in this system

    Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >