Search Results

Search found 32568 results on 1303 pages for 'linux pwns mac'.

Page 161/1303 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

  • cant open device

    - by yoavstr
    I have a little problem. I install this module into my kernel and its written under /proc When I try to open() it from user mode I get the following message: "Can't open device file: my_dev" static int module_permission(struct inode *inode, int op, struct nameidata *foo) { //if its write if ((op == 2)&&(writer == DOESNT_EXIST)){ writer = EXIST ; return 0; } //if its read if (op == 4 ){ numOfReaders++; return 0; } return -EACCES; } int procfs_open(struct inode *inode, struct file *file) { try_module_get(THIS_MODULE); return 0; } static struct file_operations File_Ops_4_Our_Proc_File = { .read = procfs_read, .write = procfs_write, .open = procfs_open, .release = procfs_close, }; static struct inode_operations Inode_Ops_4_Our_Proc_File = { .permission = module_permission, /* check for permissions */ }; int init_module() { /* create the /proc file */ Our_Proc_File = create_proc_entry(PROC_ENTRY_FILENAME, 0644, NULL); /* check if the /proc file was created successfuly */ if (Our_Proc_File == NULL){ printk(KERN_ALERT "Error: Could not initialize /proc/%s\n", PROC_ENTRY_FILENAME); return -ENOMEM; } Our_Proc_File->owner = THIS_MODULE; Our_Proc_File->proc_iops = &Inode_Ops_4_Our_Proc_File; Our_Proc_File->proc_fops = &File_Ops_4_Our_Proc_File; Our_Proc_File->mode = S_IFREG | S_IRUGO | S_IWUSR; Our_Proc_File->uid = 0; Our_Proc_File->gid = 0; Our_Proc_File->size = 80; //i added init the writewr status writer = DOESNT_EXIST; numOfReaders = 0 ; printk(KERN_INFO "/proc/%s created\n", PROC_ENTRY_FILENAME); return 0; }

    Read the article

  • What's the best Linux backup solution?

    - by Jon Bright
    We have a four Linux boxes (all running Debian or Ubuntu) on our office network. None of these boxes are especially critical and they're all using RAID. To date, I've therefore been doing backups of the boxes by having a cron job upload tarballs containing the contents of /etc, MySQL dumps and other such changing, non-packaged data to a box at our geographically separate hosting centre. I've realised, however that the tarballs are sufficient to rebuild from, but it's certainly not a painless process to do so (I recently tried this out as part of a hardware upgrade of one of the boxes) long-term, the process isn't sustainable. Each of the boxes is currently producing a tarball of a couple of hundred MB each day, 99% of which is the same as the previous day partly due to the size issue, the backup process requires more manual intervention than I want (to find whatever 5GB file is inflating the size of the tarball and kill it) again due to the size issue, I'm leaving stuff out which it would be nice to include - the contents of users' home directories, for example. There's almost nothing of value there that isn't in source control (and these aren't our main dev boxes), but it would be nice to keep them anyway. there must be a better way So, my question is, how should I be doing this properly? The requirements are: needs to be an offsite backup (one of the main things I'm doing here is protecting against fire/whatever) should require as little manual intervention as possible (I'm lazy, and box-herding isn't my main job) should continue to scale with a couple more boxes, slightly more data, etc. preferably free/open source (cost isn't the issue, but especially for backups, openness seems like a good thing) an option to produce some kind of DVD/Blu-Ray/whatever backup from time to time wouldn't be bad My first thought was that this kind of incremental backup was what tar was created for - create a tar file once each month, add incrementally to it. rsync results to remote box. But others probably have better suggestions.

    Read the article

  • Capabilities & Linux & Java

    - by Marek Jelen
    Hi, I am experimenting with linux capabilities for java application ... I do not want to add capabilities to interpreter (JVM), so I tried to write simple wrapper (with debugging information printed to stdout): #include <stdio.h> #include <stdlib.h> #include <sys/capability.h> #include <unistd.h> int main(int argc, char *argv[]){ cap_t cap = cap_get_proc(); if (!cap) { perror("cap_get_proc"); exit(1); } printf("%s: running with caps %s\n", argv[0], cap_to_text(cap, NULL)); return execlp("/usr/bin/java", "-server", "-jar", "project.jar", (char *)NULL); } This way, I can se that the capability is set for this execucatable: ./runner: running with caps = cap_net_bind_service+p And getcap shows runner = cap_net_bind_service+ip I have the capability set to be inheritable, so there should be no problem. However java still don't want to bind to privileged ports :-( I am getting this error: sun/nio/ch/Net.java:-2:in `bind': java.net.SocketException: Permission denied (NativeException) Can someone help me to resolve this? Thanks in advance

    Read the article

  • Maximum number of files in one ext3 directory while still getting acceptable performance?

    - by knorv
    I have an application writing to an ext3 directory which over time has grown to roughly three million files. Needless to say, reading the file listing of this directory is unbearably slow. I don't blame ext3. The proper solution would have been to let the application code write to sub-directories such as ./a/b/c/abc.ext rather than using only ./abc.ext. I'm changing to such a sub-directory structure and my question is simply: roughly how many files should I expect to store in one ext3 directory while still getting acceptable performance? What's your experience? Or in other words; assuming that I need to store three million files in the structure, how many levels deep should the ./a/b/c/abc.ext structure be? Obviously this is a question that cannot be answered exactly, but I'm looking for a ball park estimate.

    Read the article

  • Boost program will not working on Linux

    - by Martin Lauridsen
    Hi SOF, I have this program which uses Boost::Asio for sockets. I pretty much altered some code from the Boost examples. The program compiles and runs just like it should on Windows in VS. However, when I compile the program on Linux and run it, I get a Segmentation fault. I posted the code here The command I use to compile it is this: c++ -I/appl/htopopt/Linux_x86_64/NTL-5.4.2/include -I/appl/htopopt/Linux_x86_64/boost_1_43_0/include mpqs.cpp mpqs_polynomial.cpp mpqs_host.cpp -o mpqs_host -L/appl/htopopt/Linux_x86_64/NTL-5.4.2/lib -lntl -L/appl/htopopt/Linux_x86_64/gmp-4.2.1/lib -lgmp -lm -L/appl/htopopt/Linux_x86_64/boost_1_43_0/lib -lboost_system -lboost_thread -static -lpthread By commenting out code, I have found out that I get the Segmentation fault due to the following line: boost::asio::io_service io_service; Can anyone provide any assistance, as to what may be the problem (and the solution)? Thanks! Edit: I tried changing the program to a minimal example, using no other libraries or headers, just boost/asio.hpp: #define DEBUG 0 #include <boost/asio.hpp> int main(int argc, char* argv[]) { boost::asio::io_service io_service; return 0; } I also removed other library inclusions and linking on compilation, however this minimal example still gives me a segmentation fault.

    Read the article

  • Kernel module for /proc

    - by sb2367
    How to write a kernel module that creates a directory in /proc named mymod and a file in it name is mymodfile. This file should accept a number ranged from 1 to 3 when written into it and return the following messages when read based on the number already written into it: • 1: Current system time (in microseconds precision) • 2: System uptime • 3: Number of processes currently in the system “The Output” root@Paradise# echo 1 > /proc/mymod/mymodfile root@Paradise# cat /proc/mymod/mymodfile 08:30:24 342us root@Paradise# echo 2 > /proc/mymod/mymodfile root@Paradise# cat /proc/mymod/mymodfile up 1 day, 8 min root@Paradise# echo 3 > /proc/mymod/mymodfile root@Paradise# cat /proc/mymod/mymodfile process count: 48 please give me some hint how to write a kernel modules and how to compile and install it .

    Read the article

  • Help Installing phpMyAdmin on Linux Server

    - by Joe Majewski
    I constantly get this error when attempting to view index.php in the phpMyAdmin folder I have setup: Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. I am using subversion with three co-workers and I am trying to install this on my repository, which is at /svni3/myusername/intranet/ on our linux development server. I do have shell access so I would be able to install it somewhere else if that may be causing the problem. My config.inc.php file looks like this (only the things I changed): $cfg['blowfish_secret'] = 'blah'; $cfg['Servers'][$i]['auth_type'] = 'cookie'; //$cfg['Servers'][$i]['user'] = 'username'; //$cfg['Servers'][$i]['password'] = 'password'; $cfg['Servers'][$i]['host'] = 'localhost'; Other helpful information??? When I ping localhost it works. When I run the command "ls -l /var/lib/php": drwxrwx--- 2 root apache 4096 2009-04-17 02:31 session If there's anything else that may be helpful let me know; this has been plaguing me for a few hours now.

    Read the article

  • Why my linux signal handler run only once

    - by Henry Fané
    #include <iostream> #include <signal.h> #include <fenv.h> #include <string.h> void signal_handler(int sig, siginfo_t *siginfo, void* context) { std::cout << " signal_handler " << fetestexcept(FE_ALL_EXCEPT) << std::endl; throw "exception"; } void divide() { float a = 1000., b = 0., c, f = 1e-300; c = a / b; std::cout << c << " and f = " << f << std::endl; } void init_sig_hanlder() { feenableexcept(FE_ALL_EXCEPT); struct sigaction sa, initial_sa; sa.sa_sigaction = &signal_handler ; sigemptyset( &sa.sa_mask ) ; sa.sa_flags = SA_SIGINFO; // man sigaction(3) // allows for void(*)(int,siginfo_t*,void*) handler sigaction(SIGFPE, &sa, &initial_sa); } int main(int argc, char** argv) { init_sig_hanlder(); while(true) { try { sleep(1); divide(); } catch(const char * a) { std::cout << "Exception in catch: " << a << std::endl; } catch(...) { std::cout << "Exception in ..." << std::endl; } } return 0; } Produce the following results on Linux/g++4.2: signal_handler 0 Exception in catch: exception inf and f = 0 inf and f = 0 inf and f = 0 inf and f = 0 So, signal handler is executed the first time but the next fp exception does not trigger the handler again. Where am I wrong ?

    Read the article

  • DualBoot 32Win & 64Mac from Live USB +Persistance

    - by josephsmendoza
    So I have a 32 bit Live USB with persistance that I use to write code, cause that's just how I roll. I can boot it onto my school computers(32 bit Win) no problem, but obviously not my Mac (2007 iMac, 64 Bit). Currently I use VMWare Fusion 6 Pro and a Plop Linux image to use the usb at home, but I can only get 900mb of ram for my VM. I was hoping to make a Live USB that can boot 32 bit and 64 bit for mac, with a shared persistance file, this way I can use my computer's full 2GB. Also, I'm not allowed edit any part of this Mac. Do Not reply telling me it's impossible. Please only solutions. Thank you, and have a unicorntastic day!

    Read the article

  • NULL pointer dereference in swiotlb_unmap_sg_attrs() on disk IO

    - by Inductiveload
    I'm getting an error I really don't understand when reading or writing files using a PCIe block device driver. I seem to be hitting an issue in swiotlb_unmap_sg_attrs(), which appears to be doing a NULL dereference of the sg pointer, but I don't know where this is coming from, as the only scatterlist I use myself is allocated as part of the device info structure and persists as long as the driver does. There is a stacktrace to go with the problem. It tends to vary a bit in exact details, but it always crashes in swiotlb_unmap_sq_attrs(). I think it's likely I have a locking issue, as I am not sure how to handle the locks around the IO functions. The lock is already held when the request function is called, I release it before the IO functions themselves are called, as they need an (MSI) IRQ to complete. The IRQ handler updates a "status" value, which the IO function is waiting for. When the IO function returns, I then take the lock back up and return to request queue handling. The crash happens in blk_fetch_request() during the following: if (!__blk_end_request(req, res, bytes)){ printk(KERN_ERR "%s next request\n", DRIVER_NAME); req = blk_fetch_request(q); } else { printk(KERN_ERR "%s same request\n", DRIVER_NAME); } where bytes is updated by the request handler to be the total length of IO (summed length of each scatter-gather segment).

    Read the article

  • sysklogd ignores my log facilities

    - by Synther Lawrence
    I'm using sysklogd 1.5.5. All I want is to get local0 entries in /var/log/vr file. My conf: *.*;local0.none /var/log/messages local0.* /var/log/vr When I do logger -p local0.info "local0 test from logger" the message appear in /var/log/vr file. That's ok. But the following sends message to /var/log/messages instead of /var/log/vr: #include <stdlib.h> #include <syslog.h> int main(int argc, char const* argv[]) { openlog(NULL, LOG_PID, LOG_LOCAL0); syslog(LOG_INFO, "local0 test from app\n"); closelog(); return 0; } Where am I wrong?

    Read the article

  • C++: Help with cin difference between Linux and Windows

    - by Krashman5k
    I have a Win32 console program that I wrote and it works fine. The program takes input from the user and performs some calculations and displays the output - standard stuff. For fun, I am trying to get the program to work on my Fedora box but I am running into an issue with clearing cin when the user inputs something that does not match my variable type. Here is the code in question: void CParameter::setPrincipal() { double principal = 0.0; cout << endl << "Please enter the loan principal: "; cin >> principal; while(principal <= 0) { if (cin.fail()) { cin.clear(); cin.ignore(INT_MAX, '\n'); } else { cout << endl << "Plese enter a number greater than zero. Please try again." << endl; cin >> principal; } } m_Parameter = principal; } This code works in Windows. For example, if the user tries to enter a char data type (versus double) then the program informs the user of the error, resets cin, and allows the user another opportunity to enter a valid value. When I move this code to Fedora, it compiles fine. When I run the program and enter an invalid data type, the while loop never breaks to allow the user to change the input. My questions are; how do I clear cin when invalid data is inputted in the Fedora environment? Also, how should I write this code so it will work in both environments (Windows & Linux)? Thanks in advance for your help!

    Read the article

  • CSV Parser works in windows, not linux.

    - by ladookie
    I'm parsing a CSV file that looks like this: E1,E2,E7,E8,,, E2,E1,E3,,,, E3,E2,E8,,, E4,E5,E8,E11,,, I store the first entry in each line in a string, and the rest go in a vector of strings: while (getline(file_input, line)) { stringstream tokenizer; tokenizer << line; getline(tokenizer, roomID, ','); vector<string> aVector; while (getline(tokenizer, adjRoomID, ',')) { if (!adjRoomID.empty()) { aVector.push_back(adjRoomID); } } Room aRoom(roomID, aVector); rooms.addToTail(aRoom); } In windows this works fine, however in Linux the first entry of each vector mysteriously loses the first character. For Example in the first iteration through the while loop: roomID would be E1 and aVector would be 2 E7 E8 then the second iteration: roomID would be E2 and aVector would be 1 E3 Notice the missing E's in the first entry of aVector. when I put in some debugging code it appears that it is initially being stored correctly in the vector, but then something overwrites it. Kudos to whoever figures this one out. Seems bizarre to me. rooms is declared as such: DLList<Room> rooms where DLList stands for Doubly-Linked list.

    Read the article

  • Java socket bug on linux (0xFF sent, -3 received)

    - by Marius
    While working on a WebSocket server in Java I came across this strange bug. I've reduced it down to two small java files, one is the server, the other is the client. The client simply sends 0x00, the string Hello and then 0xFF (per the WebSocket specification). On my windows machine, the server prints the following: Listening byte: 0 72 101 108 108 111 recieved: 'Hello' While on my unix box the same code prints the following: Listening byte: 0 72 101 108 108 111 -3 Instead of receiving 0xFF it gets -3, never breaks out of the loop and never prints what it has received. The important part of the code looks like this: byte b = (byte)in.read(); System.out.println("byte: "+b); StringBuilder input = new StringBuilder(); b = (byte)in.read(); while((b & 0xFF) != 0xFF){ input.append((char)b); System.out.print(b+" "); b = (byte)in.read(); } inputLine = input.toString(); System.out.println("recieved: '" + inputLine+"'"); if(inputLine.equals("bye")){ break; } I've also uploaded the two files to my server: Server.java Client.java My Windows machine is running windows 7 and my Linux machine is running Debian

    Read the article

  • malloc in kernel

    - by yoavstr
    when i try to malloc at kernel mod i get screamed by the compiler : res=(ListNode*)malloc(sizeof(ListNode)); and the compiler is screaming : /root/ex3/ex3mod.c:491: error: implicit declaration of function ‘malloc’ what should i do ?

    Read the article

  • compile error:c language in telnet(linux)

    - by lilyrose07
    #include<stdio.h> #include<unistd.h> #include<stdlib.h> #include<pthread.h> int count=0; void *thread_function(void *arg) { while(count<10) { if(count%2==1) { count++; } else {sleep(1);} } } int main(int argc,int *argv) { int res; pthread_t a_thread[2]; void *thread_result; int n; while(count<10) { if(count%2==0) {printf("%d",count); count++; } else{sleep(1);} } for(n=0;n<2;n++) { pthread_create(&(a_thread[n]),NULL,thread_function,NULL); } while(count==9) {pthread_join(a_thread[0],&thread_result); } while(count==10) { pthread_join(a_thread[1],&thread_result); } printf("%d",count); return 0; } in telnet,linux i write gcc za.c error list: undefined reference to pthread_create,pthread_join in function 'main' //why??

    Read the article

  • Linux e1000e (Intel networking driver) problems galore, where do I start?

    - by Evan Carroll
    I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

    Read the article

  • String manipulation in Linux kernel module

    - by user577066
    I am having a hard time in manipulating strings while writing module for linux. My problem is that I have a int Array[10] with different values in it. I need to produce a string to be able send to the buffer in my_read procedure. If my array is {0,1,112,20,4,0,0,0,0,0} then my output should be: 0:(0) 1:-(1) 2:-------------------------------------------------------------------------------------------------------(112) 3:--------------------(20) 4:----(4) 5:(0) 6:(0) 7:(0) 8:(0) 9:(0) when I try to place the above strings in char[] arrays some how weird characters end up there here is the code int my_read (char *page, char **start, off_t off, int count, int *eof, void *data) { int len; if (off > 0){ *eof =1; return 0; } /* get process tree */ int task_dep=0; /* depth of a task from INIT*/ get_task_tree(&init_task,task_dep); char tmp[1024]; char A[ProcPerDepth[0]],B[ProcPerDepth[1]],C[ProcPerDepth[2]],D[ProcPerDepth[3]],E[ProcPerDepth[4]],F[ProcPerDepth[5]],G[ProcPerDepth[6]],H[ProcPerDepth[7]],I[ProcPerDepth[8]],J[ProcPerDepth[9]]; int i=0; for (i=0;i<1024;i++){ tmp[i]='\0';} memset(A, '\0', sizeof(A));memset(B, '\0', sizeof(B));memset(C, '\0', sizeof(C)); memset(D, '\0', sizeof(D));memset(E, '\0', sizeof(E));memset(F, '\0', sizeof(F)); memset(G, '\0', sizeof(G));memset(H, '\0', sizeof(H));memset(I, '\0', sizeof(I));memset(J, '\0', sizeof(J)); printk("A:%s\nB:%s\nC:%s\nD:%s\nE:%s\nF:%s\nG:%s\nH:%s\nI:%s\nJ:%s\n",A,B,C,D,E,F,G,H,I,J); memset(A,'-',sizeof(A)); memset(B,'-',sizeof(B)); memset(C,'-',sizeof(C)); memset(D,'-',sizeof(D)); memset(E,'-',sizeof(E)); memset(F,'-',sizeof(F)); memset(G,'-',sizeof(G)); memset(H,'-',sizeof(H)); memset(I,'-',sizeof(I)); memset(J,'-',sizeof(J)); printk("A:%s\nB:%s\nC:%s\nD:%s\nE:%s\nF:%s\nG:%s\nH:%s\nI:%s\nJ:%\n",A,B,C,D,E,F,G,H,I,J); len = sprintf(page,"0:%s(%d)\n1:%s(%d)\n2:%s(%d)\n3:%s(%d)\n4:%s(%d)\n5:%s(%d)\n6:%s(%d)\n7:%s(%d)\n8:%s(%d)\n9:%s(%d)\n",A,ProcPerDepth[0],B,ProcPerDepth[1],C,ProcPerDepth[2],D,ProcPerDepth[3],E,ProcPerDepth[4],F,ProcPerDepth[5],G,ProcPerDepth[6],H,ProcPerDepth[7],I,ProcPerDepth[8],J,ProcPerDepth[9]); return len; }

    Read the article

  • Is there a standard Mac OS X Snow Leopard home folder naming convention?

    - by JGFMK
    I recently re-installed a fresh copy of Snow Leopard on my Mac. I was a bit surprised when the process completed it had changed the name of my home folder to use my name rather than my initials. This messed up all the paths in my Eclipse IDE workspace. I vaguely remember being asked if I use it for home or business use and wondered if something I did there has a bearing on the way the default name is assigned. Does anyone have more information on this? Links too official Apple install etc. Cheers.

    Read the article

  • What Is the Keyboard Shortcut for Moving to Last Message in Mac OS X Mail.app?

    - by Philip Durbin
    I'm on Mac OS X 10.5.8 (Leopard). In Mail, I have the first message in my Inbox selected and I'm trying to navigate to the last message using my keyboard. In Thunderbird, I just hit the End key, which for me is "Function-right arrow" because I'm on a MacBook Pro. In Mail, with the first message selected, if I hit "Function-right arrow" (i.e. End), the scroll bar moves down, allowing me to see the messages at the bottom of the list, but the first message at the top of the list is still selected. What I want is for the last message to be selected. I've tried lots of key combinations and searched for the answer but haven't been able to find it. Please help. I posted this originally at discussions.apple.com but the only advice I received was to file a bug with Apple, which I did.

    Read the article

  • Where is the Mac Divx Web Player 7 cache folder?

    - by user30710
    Until recently, I was using Divx web player 1.4.2 because it seemed to be the least buggy. It was saving files in users/xxxxxx/movies/divx movies/temporary added files and was deleting them when the cache limit was reached. Now with 7, it's saving them alright cause I can watch my HD space go down, but I can't find them. And it's not respecting the cache limit size (mine is 4GB). The only way to clear up this space is a restart of the Mac. I'm running 10.6.8and Chrome. I've looked everywhere for the folder manually. Where is it?

    Read the article

  • Mac OS X Server 10.6.6 DNS not responding properly, get a "Truncated, retrying in TCP mode" for subdomain

    - by Eric Arseneau
    If I do an nslookup on youtube.com, no problem, if I do one with www.youtube.com, failure. See details below. [~] nslookup youtube.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: Name: youtube.com Address: 74.125.127.93 Name: youtube.com Address: 74.125.47.93 Name: youtube.com Address: 74.125.95.93 [~] nslookup www.youtube.com ;; Truncated, retrying in TCP mode. ;; Connection to 192.168.1.1#53(192.168.1.1) for www.youtube.com failed: connection refused. If I do the same from a Windows machine its fine, its when I do it from a Mac workstation that I get the issue. I have rebooted, both server and workstation, I did a changeip, but nothing is working. Any recommendations?

    Read the article

  • Is there any way to make Mac OS X Spotlight only index the file names and not the contents?

    - by aalaap
    I do understand that the point of Spotlight is to look inside files, but it also returns file name matches, and that's what I need most of the time. Besides, Spotlight is running so absurdly slow on my system (Snow Leopard on the iMac '08), it's just unusable. I downloaded Canary and Spotlight wasn't able to find the app file for 15 minutes. It was already in the download stack, but as far as Spotlight goes, the file doesn't exist. Hence, I would like to know of a way to make Spotlight only index the file names, which would perhaps make it a bit faster. I'm looking at mimicking the behaviour of Windows applications such as AvaFind or Search Everything Edit: Let me highlight the fact that I am looking for an AvaFind or Search Everything replacement for Mac OS X. Go try one of these on a Windows machine and you'll understand my disappointment with Spotlight or any other popular search tools in OS X.

    Read the article

  • Remapping Home/End from PC to Mac Via Synergy is not client specific.

    - by DtBeloBrown
    This question asks about the end key but the answers give no examples: http://superuser.com/questions/60052/what-key-works-like-end-using-a-mac-with-synergy If they had, I am guessing that they would likely have run into this problem. Adding lines like the bottom two of this: section: options keystroke(End) = keystroke(Control+Right,myiMac) keystroke(Home) = keystroke(Control+Left,myiMac) to my synergy.sgc in MyDocuments on the winXP machine would work but causes the keys to stop functioning on the winXP machine. Unacceptable. I next tried a compromise: keystroke(End) = keystroke(Control+Right,myiMac); keystroke(End,myPc) keystroke(Home) = keystroke(Control+Left,myiMac); keystroke(Home,myPc) Expecting that to broadcast the keystrokes to both machines regardless of which one was the Active Screen. That and many other variations did not work. What am I doing wrong? Has someone actually done this?

    Read the article

  • How to disable the second partition without unmount it in Mac?

    - by bagusflyer
    I've installed OSX Yosemite in another partition in my Mac. But there is a problem. For example, I installed iBooks in both partition. When I right click one of my epub or pdf file, both iBooks are shown in my context menu. This is not what I want. What I want is to only allow the apps in Yosemite shown. Of course I can disable apps in my old Maverick partition by unmount the volume. But again this is not what I want because it will hide the partition when I boot my machine so that I can't boot up into my Maverick partition. Can anybody advise if there are any better ideas? Thanks

    Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >