Search Results

Search found 27258 results on 1091 pages for 'installed programs'.

Page 162/1091 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Ubuntu 14.04 doesn't detect my discrete GPU

  - by user258887

  I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

  Read the article

• kde keyboard problems Ubuntu 12.04

  - by chazdg

  I have Unity & Gnome 3.4 installed successfully. All Dell keyboard keys work perfectly with both. I installed kde - full via terminal. Everything is working great except for the hotkeys. No calculator, no Mute, nothing. I check which keyboard is selected and choose Dell Multimedia USB Keyboard. No luck. How do I get my Dell keyboard to work with kde - the same keyboard that works with Unity & Gnome 3.4. Thanks in advance for any advice.

  Read the article

• Where are Nagios 3 Config Files in Ubuntu 12.04?

  - by Aaron James

  I just installed Nagios3 via Synaptic. The package and it's dependencies all installed fine and I log in using a web browser, however I'd like to add hosts now and according to the official Nagios Documentation the config file should be in the /usr/local/nagios/* directory. When I go to /usr/local it's not there. I can't seem to find these config files anywhere. I'm not sure what I did wrong. I'm running Xubuntu 12.04 64-bit Any help at all would be greatly appreciated, Thank you!

  Read the article

• Bootloader Problems Grub Won't Load Windows 7

  - by user108805

  I sent this to [email protected], still no response thought I could get a faster solution here. I am running Windows 7 64-bit and Ubuntu 12.04 LTS on separate partitions. The message is sent is: Boot-Repair URL: http://paste.ubuntu.com/1365163/ Originally I was unable to access Ubuntu after a windows update (Ubuntu was installed using wubi). Rather than logging into Ubuntu from the Windows 7 Bootloader, it lead to the grub command prompt. No matter what I did here, it would not log me into linux. As a result I uninstalled Ubuntu from the Add/Remove Programs application in Windows 7. I then re-installed Ubuntu 12.04 LTS using a liveCD-USB. This time however, I created a partition. I then restarted and got the GRUB bootloader which loads Ubuntu 12.04 LTS with no problems, however when I select windows (listed as "Windows 7 (loader)"), it just refreshes the grub bootloader instead of loading Windows 7. I then used the Windows 7 repair disk to run bootrec/fixmbr and bootrec/fixboot. This led to no bootloader coming up when I started my computer. Instead I got a blank black screen with a flashing white cursor. I went on to do a bootrec/buildbcd and bootrec/scanos. These did nothing to change the situation. When I ran bootrec/scanos it said that no Windows 7 installations were present. After this I decided to reinstall WIndows 7 only for this to do nothing to change the situation. Afterwards I did a boot-repair in which I began to get the GRUB bootloader, which would load ubuntu 12.04 LTS, but still would not load Windows 7. I also did a sudo update-grub which recognized Windows 7 as being installed, but still didn't fix the issue of loading Windows 7. While running Ubuntu I have no problem accessing my WIndows 7 partition which is formatted as NTFS. It shows all the files and folders reflecting that the re-install did take place, and it also shows all of my old applications and folders in the Windows.old folder. I am completely stuck at this point and have no clue what I should do next. Any help you can offer me will be greatly appreciate. Thank You --gap

  Read the article

• How to set up bridged networking in Xen?

  - by Joe Carr

  I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

  Read the article

• How to set Qwt path to the run-time linker in Xubuntu

  - by Rahul

  I've successfully installed Qwt in Xubuntu 12.04(qmake - make - make install). But now I need to set the Qwt path to run time linker of Xubuntu. In manual it's given like - If you have installed a shared library it's path has to be known to the run-time linker of your operating system. On Linux systems read "man ldconfig" ( or google for it ). Another option is to use the LD_LIBRARY_PATH (on some systems LIBPATH is used instead, on MacOSX it is called DYLD_LIBRARY_PATH) environment variable. But being newbie to Linux environment, I'm not able to proceed further. Please help me with this.

  Read the article

• Does the latest version of Ubuntu (12.04) support Unity 3D?

  - by Douglas Combs

  I just installed the latest version of Ubuntu (12.04) 64bit. I am using a Radeon HD 7750 vid card. I think I have the Catalyst driver installed correctly. But when I go to system and look at the details, it shows that my graphics is VESA:01. Does this mean I it, I didn't correctly install my driver? System Specs: MB: ASUS P7P55-M CPU: Intel i5 Quad Core MEM: 4GB DD3 VC: HIS Radeon HD 7750 (1GB DDR5) Thanks for help.

  Read the article

• Windows 8, NVIDIA graphics recognition fails

  - by Roy Grubb

  I just installed Windows 8 Pro OEM 64-bit (clean install) and it won't properly recognize my graphics adapter. When I installed Win8, it automatically installed the BasicDisplay.sys driver dated 6/21/2006. 6.2.9200.16384 (win8_rtm.120725-1247). Hardware - Mobo:MSi G41M-P33 Combo CPU:Intel CoreDuo 6600 Graphics:NVIDIA GeForce 9400GT *OS* - Windows 8 Pro 64-bit OEM The graphics adapter worked fine in Windows XP. The PC is a generic box, bought locally and its mobo failed recently, so I replaced it with the G41M. Microsoft wouldn't let me re-activate Windows XP with a different mobo, so I installed Win8, which appears to work except as described next. Win8 only partially recognizes the graphics adapter and won't allow NVIDIA latest driver installer to see that it's an NVIDIA card. As a result, OpenGL doesn't work, and this is needed by the software I most use. Other than that the graphics look OK. When I say 'partially recognizes', I mean that via the Control Panel, I can see that the adapter is described as NVIDIA, but the driver remains stuck at Microsoft Basic Display Adapter no matter what I try, including "Update driver..." in adapter properties. Display Screen Resolution Advanced Settings Adapter shows: Adapter Type: Microsoft Basic Display Adapter Chip Type: NVIDIA DAC Type: NVIDIA Corporation Bios Information: G27 Board - p381n17 Don't know what this means ... no mention of 9400GT Total Available Graphics Memory: 256 MB Dedicated Video Memory: 0 MB In fact the adapter has 512MB on-board video memory. System Video Memory: 0 MB Shared System Memory: 256 MB And Control Panel Device Manager Display adapters just shows Microsoft Basic Display Adapter. No other graphics adapter, and no unknown device or yellow question mark. What I have tried so far: 1. Cleared CMOS and reset. Updated BIOS and all mobo drivers as follows: 1st I used Driver Reviver to see if any driver updates were required. It found some but I didn't use that to get the drivers. Then I switched to MSi's own mobo driver utility Live Update 5. This also showed the board needed to update several so I used it to fetch the new drivers. After that it showed that everything was up to date and I checked with Driver Reviver again, which also reported no drivers now needed updating. Rebooted. Went to the NVIDIA site to get the latest graphics adapter driver. Their auto-detect "Option 2: Automatically find drivers for my NVIDIA products" said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products." So I downloaded 310.70-desktop-win8-win7-winvista-64bit-international-whql.exe, which lists 9400 GT under supported products, but when I run it, it says: "NVIDIA Installer cannot continue This graphics driver could not find compatible graphics hardware." Connected the display to the on-board Intel graphics (G41 Intel Express), removed the NVIDIA card and rebooted, changed to internal graphics in CMOS. Again it installs the MS Basic Display Adapter, and can't properly run my s/w that needs OpenGL. It runs on other machines with Intel Express graphics (WinXP and 7) Shut down and pulled out the power cord. Held start button to discharge all capacitors. Removed and re-inserted NVIDIA adapter in PCI-E slot and made sure properly seated. Connected the monitor to the card, screwed plug to socket. Reconnected power cord. Started and checked in BIOS that Primary Graphics Adapter was set to PCI-E. Started Windows. Uninstalled MS Basic Display Adapter in Device Manager. Screen blanks briefly, reappears. No Graphics adapter entry was then visible in Device Manager. Restarted PC. MS Basic Display Adapter Visible again in Device Manager. Clicked in Device Manager View Show hidden devices. No other graphics adapter appears, no unknown devices. Rebooted. Tried Scan for Hardware changes. None detected. Tried right-click on MS Basic Display Adapter Properties Driver Update Driver... Search automatically. It replied that it had determined driver was up to date. I checked that there were no graphic driver-related entries in Programs and Features that I could delete (none). Searched for any other drivers with nvidia in their name and deleted them, just keeping the 306.97 installer exe file. Did a Windows Update. Ran GPU-Z which shows (main items): Microsoft Basic Display Adapter GPU G72 BIOS 5.72.22.76.88 Device ID 10DE - 01D5 DDR2 Bus Width 32 Bit Memory size 64MB Driver Version nvlddmkm 6.2.9200.16384 (ForceWare 0.00) / Win8 64 NVIDIA SLI Unknown in the drop-down at the foot, "Microsoft Basic Display Adapter" is the only option If I swap hard disks in that machine to one with a Ubuntu 10.4 installation (originally installed on the same PC), lspci shows "VGA compatible controller as NVIDIA Corporation Device 01d5 (rev a1) (prog-if 00 [VGA controller])" and "kernel driver in use: nvidia" I'm out of ideas for new things to try and would be really grateful of suggestions. Thanks!

  Read the article

• Lenovo u400, Ubuntu 12.04. Sudden reboots / power down

  - by Victor Neo

  I've recently bought a Lenovo u400 (http://www.lenovo.com/products/us/laptop/ideapad/u-series/u400/) and installed Ubuntu 12.04 on it. Everything works fine (I've installed the proprietary ATI drivers for switchable graphics) except that I get a random power down or reboot either while surfing the web or watching videos. Monitoring the temperature with sensors, the laptop never goes into any critical zone but still may power down or reboot once in a while. Is there any logs that I should check and any particular message I should take note of? EDIT: This happens to me as well. This also happens without proprietary drivers activated.

  Read the article

• How to remove all that country-specific dictionaries (like En_AU, En_CA, de_CH, etc)?

  - by Ivan

  After I've installed some language packs and spell checking dictionaries (I'd like to use with Firefox and OpenOffice) I've got tons of language variations installed. This makes very inconvenient to maintain dictionary additions, for example. Sometimes Firefox decides to switch to Australian, sometimes to UK dictionary, sometimes to US, etc. For me, a Russian, English is just English, and German is just German. I think every English-speaking will understand me, may I write "color" or "colour", "dialog", or "dialogue" (I usually prefer classic UK spelling though, as a matter of a habit (as I was taught at school)). How to remove all those dialects?

  Read the article

• Installing drivers for an ATI 6950 in Ubuntu

  - by aj.esler

  Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

  Read the article

• How can the original icons and fonts be restored in ubuntu 12.10?

  - by Harsh

  Recently i installed cairo-dock and changed the original ubuntu theme. then i uninstalled it. but the icons on the left side didn't restored into its original look. Somewhere I found a command sudo apt-get autoremove --purge light-themes sudo apt-get install light-themes After running this command the theme didn't changed but it seems that the font of the original ubuntu changed a little. I want the theme of ubuntu as it was when i newly installed it. Moreover, the alt+tab and some other key combination not working normally. please help.

  Read the article

• Google Chrome side by side stable beta unstable. How to approach?

  - by sobi3ch

  I have the stable version of Google Chrome on my box. And each time I'm trying to install beta or/and unstable versions then I run into the same problem: The following packages will be REMOVED google-chrome-stable The following NEW packages will be installed google-chrome-beta 0 upgraded, 1 newly installed, 1 to remove and 0 not upgraded. Need to get 34.5 MB of archives. After this operation, 3,109 kB of additional disk space will be used. Do you want to continue [Y/n]? I need to remove the first version before installing another. How can I install stable and beta (and maybe unstable as well) next to each other?

  Read the article

• Both Webmin & ISPConfig won't work on my Ubuntu Linode

  - by SERVE-U

  I followed the steps on this page to download and setup Webmin on my Linode Ubuntu server, however, when I try to visit https + my.ip.add.ress + :10000, the page just hangs and nothing loads. I already looked into my firewall settings. I uninstalled Webmin and installed ISPConfig and all its dependencies, and the same thing happens at https + my.ip.add.ress + :8080. This is my first time managing a server so there could be something I overlooked. But my server is a pretty vanilla Ubuntu 12.10 with LAMP stack installed exactly as per the instructions in Linode's documentation.

  Read the article

• Ubuntu Hangs Suddenly (Dell Latitude E5530)

  - by iFadey

  I recently bought (a month ago) Dell Latitude E5530 which comes pre-installed with Ubuntu 11.10. I removed Ubuntu 11.10 and installed 12.04 LTS right after the purchase. Everything worked out of box but occasionally Ubuntu completely hangs. The screen freezes and I can't even switch to other terminals by pressing (CTRL+ALT+F*). Whenever the screen freezes, CPU fan speed also increases. This is not happening when running particular applications. I mean it can hang without giving any reason or error displayed and while running any application. In short currently I can't able to reproduce system hang myself. I also want to mention that sometimes it never hangs complete day. Here are the specs of my laptop: Processor: Core i7-3520M CPU @ 2.90GHz Memory: 8GB HDD: 500GB, 7200rpm (Model=ST9500423AS) Graphics: Intel HD 4000 Operating System: Ubuntu 12.04 LTS (64-bit) Thanks!

  Read the article

• Wrong notification on GNOME Shell?

  - by audrianore

  I just installed GNOME Shell on my 12.04 a couple hours ago. The notifications are just cool, and I installed shell extensions, and it works smoothly in 1 hour. Then I restarted my computer for some reason, start back in to GNOME. And I was surprised with the default notification showed up. It replaced the GNOME notifications! I tried to: Reinstall gnome-shell. (autoremove and install) Reset desktop configuration. But it didn't work at all. Is there anything I can do to fix it? Plus: I got a double notification (osd + gnome notification showed up) when someone chatted me.

  Read the article

• Can't get vnc to connect

  - by Thom

  I have a server and my laptop. I want to be able to start vnc server on the server and then connect from my laptop. Both are running ubuntu 11.10 64 bit desktop On my server, i installed x11vnc. I set it up with a password, no view only password. I ssh to the box and typed vncserver :42 Now on my laptop, I installed gtkvncviewer and ran it. It popped up a box. I entered the picard:42 (the name of the server in my /etc/hosts file) and the password. I tried with and without the user. It always disconnects immediately. Can anyone point out what I'm doing wrong? Is it because I'm not running a GUI session currently on picard? If so, how can I start the Xwindows session remotely to connect with vncserver?

  Read the article

• Building SANE from git-source produce backend missmatch on 12.04 even if built locally

  - by deinonychusaur

  It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

  Read the article

• HD Video Peformance Unacceptable

  - by Mike Hasselbeck

  Was wondering if anyone could help me boost HD 1080p video performance on my machine? I've got an AMD Athlon X2 Dual Core processor, 2 gb RAM & an ATI Radeon 5450 video card. I've installed the latest ATI Catalyst drivers, I installed the hardware acceleration things and linked them (I believe) to VLC. Still, it's still not running as well as I would like. Any thoughts or suggestions? Any help would be much appreciated. Thanks!

  Read the article

• Problem in booting Windows Vista after repairing using a boot repair disk

  - by Pubudu

  Been using Vista and I recently installed Ubuntu 11 in a separate hard disk(in BIOS, this hard disk was set for the 'Boot from' option)..Apart from the partitions used for Ubuntu, there are 2 more partitions(NTFS) in that hard disk..Then I installed Windows 7 on one of those partitions (just to see which Windows operating system I'd like to keep on using, along with Ubuntu)..But after installing Windows 7, the OS selection menu didn't appear anymore and had to fix it using the Boot-Repair-Disk... It kinda worked.. Now the OS selection menu is displayed.. But whenever I select Vista, it boots Windows 7...any thoughts on how to fix this? here's the link to the log generated by boot repair http://paste.debian.net/202691 I'm new to Ubuntu btw..

  Read the article

• Install Ubuntu 12.04 LTS 64bit in Lenovo S205 Failed

  - by Zakiul Fuady

  I had ever installed Ubuntu 12.04 in Lenovo S205 twice, but it could not boot like an ordinary laptop. how i can fix this problem.? i tried to install dual boot. windows and Ubuntu. but it could not work properly. even, when i installed single boot. it could not too. installation was okay, but it could not boot to Ubuntu. just stuck in blank screen. like what I posted in my blog below http://fzakiul.wordpress.com/2012/05/11/lenovo-ideapad-s205-vs-ubuntu/ extremely need a help.

  Read the article

• Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

  - by Frank A

  I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

  Read the article

• How do I boot the live CD on a Macbook Pro?

  - by pst007x

  Trying to install Ubuntu-11.10-64bit-MAC on a Macbook Pro. But I cannot get the live CD to load. 'C' does not work 'CMD' does not work 'OPT' no opt key CD is not corrupt and burnt using the correct iso, all checked. Installed perfectly on my Acer PC.... God I hate Apple Macs! Mac currently has Ubuntu 10.10 32bit, but i get issues with the touchpad, I read Ubuntu 11.10-mac version resolves these issues, hence the attempted re-installation... I do not have any MAC OS installed in this PC only Ubuntu 10.10. When I press 'alt' the CD does not appear in the list only my HDD, yes my CD is working fine.

  Read the article

• How do I shutdown 12.10 when ACPI is set to OFF?

  - by rahi

  I recently installed 12.04 on an HP Spectre XT ultrabook. I installed 12.04 from a USB. When the install was complete, and the computer restarted, I got a blank screen. After some searching, I found that I had to choose "acpi=off" during the installation, which now shows up in the grub screen. Once I was on 12.04, I upgraded to 12.10. The issue now is that when I hit shutdown, the computer hangs on a purple shutdown screen. Usually, at this point, I press the power button on the machine to completely power off the machine. I am new to ubuntu, and would appreciate the help. Thanks.

  Read the article

• How can I remove a Unity window entry?

  - by Pol Delgado Martin

  I installed Eclipse long time ago from the Software Center, but recently I needed a newer version than the repo one. Then I removed it via Software Center and installed Eclipse Kepler in /opt. However, the window opened is not called Eclipse, it is the name of an old program I made (Eclipse- GMM). However, that's not the main issue, but that even if I created a .desktop file it launches the same, having "two" eclipses in the dock, the actual program and the launcher. How can I remove Unity .desktop cache or wathever it is this?

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >