Search Results

Search found 20684 results on 828 pages for 'ad hoc network'.

Page 163/828 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Curious enigma of a network cable / connection / quality

  - by Foo Bar

  So, the situation is like this: I'm renting an apartment in a large house and I'm sharing internet with the landlord who lives downstairs. The internet is (in my best guess) optical 20/20Mbit. I don't know how it's all wired in his flat (haven't been there / seen it). Anyway, in my flat comes a cable which seems to be connected directly to the optic to ethernet router (and the password is the default one, so I have access, he he). There was a switch connected to that and to wires that go around the flat, and the wiring is terrible. It's even mixing phone and ethernet, and from what I see some cables are even interconnected!? Anyways, this cable that comes to my flat is very short. I can barely connect my computer on it, but if I do, I seem to get decent speed / performance. Not great, but decent. If, however, I connect switch to it (tried 2 different switches and a wifi switch) it's all blinking but I can't even connect to 192.168.1.1 (the router). DHCP fails, ping is losing 80-100% of replies. So I connected this cable directly to the other cable which goes to my work room, with a connector that has two female jacks and no electronics. Now when I connect my computer in my room, again, the performance is decent. When I connect WRT54GL (with tomato, DHCP disabled) to it and I plug a cable in this WRT and to my computer... the performance is gone. Download seems okay on Speedtest, but upload is .2Mbps and it's connecting forever. So what kind cable troll am I having here? Any ideas?

  Read the article

• Same network same switch but computers can't talk "ping"to eachother [closed]

  - by Sue

  Possible Duplicate: How does IPv4 Subnetting Work? Each computer(all 2 of them) can ping the router but can't ping each-other and firewall is off. Same default gateway, IP address very similar (just two number away at end) but the subnet mask is different between these two computers. One ends in 192 the other 224. There is a switch between them that then connects to the router. Why can't the computers ping each-other?

  Read the article

• Adding Exchange Multi Tenant to an existing Exchange Network

  - by TiernanO

  I currently have an Exchange 2010 SP1 server in house, and due to some changes, it looks like i will need Multi Tenant support for a few extra domain names. Looking at the documentation i have found so far, it only mentions multi tenant support when upgrading from 2010 RTM - SP1, and not what you do if you have already got 2010 SP1 installed. So, from what i can gather, i have a few options: Install a new Exchange server with Multi Tenant support and migrate DBs over Back everything up and start again Something else... Any suggestions would be greatly appreciated... Thanks.

  Read the article

• Maximise network transfer speed of various applications

  - by Alex

  When using nc, scp, wget to transfer files between 2 machines on a dedicated 2Mbps link, I get speeds between 0.5 and 1 Mbps. However, when I use iperf -c 10.0.1.4 -t 20 -P 12 (for example) I can maximise the speed of the link (getting stable 2Mbps). Is there a way to make single stream transfers (such as those done by scp) to utilise all/most of the link? Some kind of tcp settings, or iptables...?

  Read the article

• Adobe software does not save to network share

  - by Bart van Heukelom

  I'm running Windows 7 inside virtualbox on a linux host. I have shared my linux filesystem so it's accesible in Windows under \vboxsvr\sharename. I've mounted this share on S:. For most software, it works fine. Adobe software like Photoshop has problems with it though. I can read from S: just fine, but if I try to save something it gives me the message "There are no more files". How can I make it able to write to the share?

  Read the article

• why only google related sites load using wireless network

  - by gansai

  I have a wireless internet connection through BSNL. I have a windows 7 ultimate, and using latest Google chrome. During night time ie from 12:30 am onwards till around 5:30 am, I have the following problem: Only the following webpages load: Google Search Google images and all related to google product pages like you see them on the google home page. Blogspot webpages as supported through Google. Any other site loading gets stuck with the status message:- Waiting for www.thaturl.com .... And it goes on and on. Why does this happen? I checked around googling for this but no solution at all. By the way I tried changing my dns addresses too sometimes from automatically to opendns and then Google public dns. I need some solution which might help me to load other websites also. Thanks in advance.

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• Remote I/O costs with a Content Delivery Network

  - by x711Li

  As far as I know, the time complexity of scanning a directory and the amount of files in said directory are correlated due to I/O costs. Would the administrative costs of placing the files in a hashed directory tree for uploading/downloading files through a CDN API be worth it for the added efficiency? For instance, given a filename foo.mp3, the MD5 hash for this is 10ebb1120767e9de166e0f5905077cb1. Thus, storing foo.mp3 in ./10/eb/foo.mp3 would allow for less files per directory (assuming MD5 generates patterns with in Base36, this allows for 36^2 root directories with 36^2 subdirectories each and little chance of hash collision) Considering the directories themselves are not loaded, would the I/O costs of directory scanning still exist with direct uploading/downloading?

  Read the article

• Network Bridging on Linux for OpenVPN

  - by Coyote

  I've been following all the OpenVPN Bridge tutorials I can, but I'm still missing something. Does anyone know of a super detailed tutorial\explanation of bridging? If anyone has bridging running, can I get a copy of your interfaces file to see how you've got it going. (Obviously change the ip address, just please change them consistently.)

  Read the article

• Two routers network routing settings

  - by xiamx

  I have two routers, Router A is connected to the internet, and Router B is connected to the LAN port of Router A. Router A: 192.168.1.1 Subnet 255.255.255.0 Router B: IP leased from router A: 192.168.1.2 gateway 192.168.0.1 subnet 255.255.255.0 I have a machine C plugged to router A with ip 192.168.1.3 also a machine D plugged to router B with ip 192.168.0.199 I want to access machine D from a machine C. What settings do I need to change to do that?

  Read the article

• Android: Problems downloading images and converting to bitmaps

  - by Mike

  Hi all, I am working on an application that downloads images from a url. The problem is that only some images are being correctly downloaded and others are not. First off, here is the problem code: public Bitmap downloadImage(String url) { HttpClient client = new DefaultHttpClient(); HttpResponse response = null; try { response = client.execute(new HttpGet(url)); } catch (ClientProtocolException cpe) { Log.i(LOG_FILE, "client protocol exception"); return null; } catch (IOException ioe) { Log.i(LOG_FILE, "IOE downloading image"); return null; } catch (Exception e) { Log.i(LOG_FILE, "Other exception downloading image"); return null; } // Convert images from stream to bitmap object try { Bitmap image = BitmapFactory.decodeStream(response.getEntity().getContent()); if(image==null) Log.i(LOG_FILE, "image conversion failed"); return image; } catch (Exception e) { Log.i(LOG_FILE, "Other exception while converting image"); return null; } } So what I have is a method that takes the url as a string argument and then downloads the image, converts the HttpResponse stream to a bitmap by means of the BitmapFactory.decodeStream method, and returns it. The problem is that when I am on a slow network connection (almost always 3G rather than Wi-Fi) some images are converted to null--not all of them, only some of them. Using a Wi-Fi connection works perfectly; all the images are downloaded and converted properly. Does anyone know why this is happening? Or better, how can I fix this? How would I even go about testing to determine the problem? Any help is awesome; thank you!

  Read the article

• Listening UDP or switch to TCP in a MFC application

  - by Alexander.S

  I'm editing a legacy MFC application, and I have to add some basic network functionalities. The operating side has to receive a simple instruction (numbers 1,2,3,4...) and do something based on that. The clients wants the latency to be as fast as possible, so naturally I decided to use datagrams (UDP). But reading all sorts of resources left me bugged. I cannot listen to UDP sockets (CAsyncSocket) in MFC, it's only possible to call Receive which blocks and waits. Blocking the UI isn't really a smart. So I guess I could use some threading technique, but since I'm not all that experienced with MFC how should that be implemented? The other part of the question is should I do this, or revert to TCP, considering reliability and implementation issues. I know that UDP is unreliable, but just how unreliable is it really? I read that it is up to 50% faster, which is a lot for me. References I used: http://msdn.microsoft.com/en-us/library/09dd1ycd(v=vs.80).aspx

  Read the article

• Set web browser (or other program) to use specific network

  - by Will

  my PC is connected to 3 different networks: 2 different LAN connections and a VPN connection. when i am connected to the vpn, i cannot browse to the LAN intranet as the DNS is all going through the vpn and it cannot see the domains on the LAN. Is there a way to set firefox/chrome/etc to use a specific connection, so that i don't have to disconnect from vpn to get to the other intranets?

  Read the article

• How to clean up orphaned SID's in ACEs in AD?

  - by geoffc

  As a follow up to my question Do backlinks clear in AD for deleted users I have another related but different question. Since I am informed in the answers there that a deleted object's SID (Group or User, so assigning rights to group only minimizes the issue, and does not fix it) will remain within ACEs they have been assigned, leaving them orphaned. Lotus Domino, which has similar issues with back references, has an adminp process to clean up such orphaned references. Is there a similar process in AD that would allow you to clean up such orphaned SIDs floating around your domain?

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

• All computers on network get stuck waiting for some sites indefinetely

  - by zacaj

  This happens across three computers, running windows 7 and Ubuntu, firefox, opera, and chrome (all latest versions). I am connected to the internet through a Verizon wireless usb modem. When I try to open some web pages they will never finish loading (and usually never even show anything). The status bar at the bottom of the browser will display "Waiting for X" The servers it gets stuck on include: platform.twitter.com s7.addthis.com connect.facebook.net ajax.googleapis.com 2mdn.net Ive been getting away with just blocking them in AdBlock up until now, however the last two have been causing problems. There are some sites which require googleapis.com to load correctly, and some that wont ever load unless its blocked. eBay requires access to 2mdn.net to load pictures. On top of this its getting really annoying having to update AdBlock across all these computers whenever a new site pops up. I'm hoping there's some easier way to fix this? The different sites causing the freeze indicate to me that it's either a problem on my end (somehow?) or some server side software that got updated with a new bug?

  Read the article

• VMware Workstation 7&8&9 does not generate /etc/vmware/network upon installation

  - by dash17291

  When I install VMware Workstation on Arch linux Virtual ethernet is not working. $ sudo tail /var/log/vnetlib Aug 28 22:20:33 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:33 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:33 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:33 VNLNetCfgUnload - Requested cache is not loaded Database file is not present. Failed to initialize Aug 28 22:20:41 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:41 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:41 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:41 VNLNetCfgUnload - Requested cache is not loaded Required modules compiled. Previously I have copied that file or directory (I don't remember) from a working installation, but now I need a real solution. It's strange for me, may be a hardware issue also because with Ubuntu the same thing happens on the same computer.

  Read the article

• small Windows network w/ printer issue

  - by user33666

  printer 1 connected to the desktop printer 2 connected to the same desktop that desktop is connected via Cat 5 to a wireless router a notebook is connected to that same router via WiFi The desktop Control Panel has just been reconfigured to share printers. (I assume this means that the desktop will now allow a notebook coming through the router to be able to access the two printers that are presently hooked up via the desktop--am I correct? Is that what it means?) The desktop can still print to either printer. It is presently okay. This notebook/printer relationship is a new configuration. The notebook, however, can't print at all (yet it can access the internet just fine). Any suggestions for it to be able to access the printers and be able to print via the desktop via the router? Thank you for any assistance.

  Read the article

• Accessing windows machine web server from other machines of the Network

  - by MySQL DBA

  Hi All, I have installed wordpress on my windows vista machine. and I want other people of my team to access it from my local machine. How I can do that? Please help. Thanks in advance. Regards, Manasi Save

  Read the article

• Setting up a home network

  - by Mat Richardson

  I'm trying to get my head around how to do this with the equipment I have. Here's how it is.. I have an old laptop that has server 2003 installed on it. This has no wireless NIC, but I have a spare wireless router that I can wire to it. We have a virgin wireless router which provides the home with internet access. What I would like to do it make resources on the server 2003 machine available to the rest of the devices in the home - specifically a couple of laptops running windows 7. Ideally I'd like to be able to use the laptop as a fileserver but maybe also offer application virtualization. In the first instance however, I'd like to create a file server with the laptop and allow connections to it by the other machines. Virtualisation is just a 'nice to have'... Given the hardware I have is this possible? Can you point me in the right direction how to do what I want if this is the case?

  Read the article

• Connecting to network device behind NAT from local LAN using the external port and IP

  - by lumbric

  I noticed at several different LANs connected to the Internet through a NAT the following phenomena. There is a server in the LAN and there is a port forwarding to reach this server also from outside the LAN through the NAT. E.g. consider a LAN with the address 192.168.0.* and a SSH server at 192.168.0.2 with port 22 and a forwarding from port 2222 at the NAT 192.168.0.1 to 192.168.0.2:22. If the NAT's external IP is 44.33.22.11, one can connect to the SSH server through 44.33.22.11:2222. Surprisingly this works only from outside the LAN. If one tries to connect to 44.33.22.11:2222 from behind the NAT, there is no answer. Of course one could simply use 192.168.0.2:22, but often it is simpler to use the external IP. The typical use case for me is the configuration on a laptop computer. Usually the user uses any arbitrary Internet connection to connect to his home or office server, but sometimes he will use also the LAN to connect to it and it would be annoying to have to different configurations or bookmarks. Why does it fail to connect from inside the LAN? Is there any good work around?

  Read the article

• Monitoring VPN users on my network

  - by Fen0x

  My company runs filters on contents available for browsing and I have to check if everyone is respecting the browsing policies. Recently I have spotted some users activate OpenVPN on their workstations and i have discovered that they connect on port 443 of an external server and then use a proxy to circumvent the company filters. Is there any method to monitor VPN connections on allowed ports or to avoid the connections?

  Read the article

• How do I get to the bottom of network latency and bandwidth issues

  - by three_cups_of_java

  I recently moved two blocks south. That move moved me from Comcast to Broadstripe (high-speed internet cable providers). Comcast was pretty good. Broadstripe sucks. I called them on the phone, and they basically brushed me off (politely). I want to come to them with some numbers, so I can say more than just "it's really slow". I still have access to my old Comcast service, so I can run the tests using both providers. Here's what I'm seeing with my new Broadstripe service: 1) When I browse to most sites, there is a long delay (5-10 seconds) before the page starts loading in my browser 2) The speed test tell me I have 12 megs down (bullshit) 3) I have a server at my office. I just downloaded some files (using scp on the command line). It said I'm getting 3.5 KB/s I'm an experienced programmer and spend most of my days on the command line and in vim. Networking, however is not a strong point. I've played around with traceroute, but I'm not sure if that's the right tool to use. I have access to servers all over the country (I would just use Amazon EC2 to set up a test server), and I prefer to use Ubuntu for my testing. How can I come up with some hard numbers to show Broadstripe how crappy their service is?

  Read the article

• Mirror network packets from WiFi to Ethernet in an ASUS Router RT N53

  - by fazineroso

  I have an ASUS RT N53 router, running the default firmware (Linux 2.6.22 with busybox and uclibc). I need to capture data packets from some Wi-Fi devices I have connected to that router (iPad and some smartphones), but the router is not forwarding any package coming from Wi-Fi devices to the Ethernet Ports. Any idea how can I proceed? Available tools in the router are iptables (no tee option, though), ebtables, brctl... Currently the ethernet and Wifi devices are forming a bridge: # brctl show bridge name bridge id STP enabled interfaces br0 8000.50465dc06be2 no vlan0 eth1 No ebtables rules: # ebtables -L Bridge table: filter Bridge chain: INPUT, entries: 0, policy: ACCEPT Bridge chain: FORWARD, entries: 0, policy: ACCEPT Bridge chain: OUTPUT, entries: 0, policy: ACCEPT

  Read the article

• How to get rid of rom-boot & network boot options when booting up

  - by Nrew

  I am using a compaq b1200. And it really sucks when you boot up and see those choices consuming a lot of time in the boot process. How do I get rid of it to achieve faster boot up. In windows, specifically windows 7.

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >