Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 163/1359 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Google Earth freezes during zoom-in on Intel processors with integrated graphics

  - by zigma80

  When I zoom in at a certain zoom level, Google Earth makes my system freeze completely so that I have to power off or reboot I use Kubuntu 12.04 and my laptop has an Intel(R)Core(TM)i3-2310M CPU @2.10GHz with HD3000 graphics. I installed intel-gpu-tools and tried to fix it with sudo intel_reg_write 0x2120 0x1206800 as explained [here][1], but that didn't work. I wonder if there any other solution out there...

  Read the article

• Black screen after grub kernal selection menu

  - by skip

  I have an Acer eMachines e727 with Intel GMA 4500M integrated graphics (drivers updated to latest). I installed Ubuntu 12.04 using Wubi. All is well until I select the kernal (first one on the list). My display goes black. I searched for solutions and found one on Unbuntu forum which partially helped. Following that sticky post, I pressed "e" at the kernal listings. I changed the $Linux... default line to "quiet splash nomodeset" and was able to get to the login screen and desktop. I edited grub to make the nomodeset permanent (also removed the vt command as recommended). I followed through with changing grub to match the graphics as recommended in the article using the grub cli (using info from vbeinfo). I updated grub with the recommended settings but still get the black screen after selecting the kernal. Only nomodeset works to get me to the login and desktop. Once I get to the desktop, my display resolution shows being set to 1024x768 but it actually looks like 800x680. What do I need to do to get past these issues? Thanks!

  Read the article

• The best choice of linux file system and software that can be accesed from Windows

  - by Florin

  I am curently having ubuntu and win 7 dual boot and I want to delete my windows 7 and format all my partitions to use a linux file system. But I want to leave a door open in case I have any problems with linux, to be able to acces my linux file system with windows. I know that there are programs that can give you read-write acces to a ext2/3/4 FS (I tested none). I need advice in choosing the right FS, what are the diferences between ext 2/3/4 and what is the best software to do that.

  Read the article

• Unity very slow while Gnome Classic running just fine

  - by Sorin Sbarnea

  I see tons of people complaining about Unity speed and I think the problem is not with the video drivers. When I login to Gnome Classic the system is behaving just fine, but when on Unity I can barely do use it: windows are moved hard, terminal is damn slow. Is there any solution or bug that I should track? Details Ubuntu 11.10 Two monitors setup Latest Nvidia proprietary drivers (tested with default ones also, no change) 6GB RAM, Xeon @ 2.8 Nvidia Driver 280.13 - Quadro NVS 295 with 8 cores 256MB RAM. lspci | grep VGA 02:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 295] (rev a1) uname -a Linux sorins 3.0.0-16-generic #29-Ubuntu SMP Tue Feb 14 12:48:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Cannot install shell-themes using gnome-tweak-tool

  - by Chris

  How do I fix this? I will attempt to upload a screenshot of the problem. Notice there is an error like triangle near the shell themes and nothing is select-able. Also there are no shell extensions under the shell extensions tab. I have come across many postings on how to fix this but none worked for me. I currently have 12.04 LTS. I have a custom Phenom quad core machine with Radeon HD 5770 graphics if that helps.

  Read the article

• google-chrome video application association

  - by Ben Lee

  Is there any way to tell google-chrome to launch video files of particular types in an external application (or even just to bring up the download box as if the type was un-handled), instead of showing the video inside the browser? Searching online, it seems that chrome is supposed to use xdg-mime for file associations, but apparently is ignoring this for video. For example, when I do: xdg-mime query default video/mpeg It returns dragonplayer.desktop. But when I click on a mpeg video link, chrome displays it internally instead of launching Dragon Player (if I double click on a mpeg file in my file manager, on the other hand, it does open Dragon Player). So is there a way to tell chrome to respect this setting, or another way to coax chrome into opening the file externally? If it matters, I'm running the latest version of google-chrome stable (not chromium) at the time of writing, v. 18.0.1025.151, on kubuntu 11.10.

  Read the article

• Gateway IP Returns to Zero

  - by Robert Smith

  When you set a static IP under Ubuntu 12.04.1, you must supply the desired machine IP and the gateway IP, all using the Network Manager. When I first entered them and rebooted, everything worked great. On the second boot, however, Firefox could find no Web page. Upon checking, I discovered that the gateway IP had returned to zero. Now, no matter how often I resupply it, it returns to zero immediately after NM "saves" it: that is, appears as zero when redisplayed. The only way I can get to the Internet is to restore DHCP operation. I need to use static IP for access to my home network. Would appreciate any suggestion. --Robert Smith

  Read the article

• Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

  - by Tassos

  I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

  Read the article

• Wireless on Inspiron 1501 not working on Ubuntu 12.04 LTS

  - by Jeek C

  As titled, I have Ubuntu 12.04 LTS on an Inspiron 1501, and the wireless has refused to work thus far. Below is what I have tried: Activating the Broadcom driver via System Settings Additional Driver Using the below commands sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer installing the cutter software Sadly, none of them can get the wireless working. Is there anything else I can try?

  Read the article

• unable to format usb 1204 [daemon inhibited ]

  - by santosamaru

  i try to format my usb 1st time its work all data gone but i can't save any file at this usb . then i try to check is it working or broken here the report santos@santos:~$ sudo badblocks -v /dev/sdb [sudo] password for santos: Sorry, try again. [sudo] password for santos: Checking blocks 0 to 7824383 Checking for bad blocks (read-only test): 0.00% done, 0:00 elapsed. (0/0/0 errdone Pass completed, 0 bad blocks found. (0/0/0 errors) santos@santos:~$ sudo badblocks -v -w /dev/sdb [sudo] password for santos: Sorry, try again. [sudo] password for santos: /dev/sdb is apparently in use by the system; it's not safe to run badblocks! santos@santos:~$ how to format and fix this issues? i have read this link Formatting Pen Drive causes 'Daemon Is Inhibited' Error and it said like this when i try to move any items from desktop " the destination is read only also in this case i use google and find this http://ubuntuforums.org/showthread.php?t=1955353 article as same its not helped following user13509 suggestion ..

  Read the article

• Thunderbird 16.0.1 filling disk space

  - by Kris

  I'm on Ubuntu 12.04 with Thunderbird 16.0.1 and Kernel 3.6.0-030600rc4-generic. I used Thunderbird for quite a while and never had any problems with it. But now it seems to fill up my disk space very fast: watch -n 1 df -h . so Ubuntu started giving out warnings. First I removed some files but not much later it had filled up around 600 MB. It eats around 50 MB/min while I just download 10 emails or so via IMAP. This behaviour is new and seems to be some kind of bug. I don't want to delete my old mails, so what else could I do?

  Read the article

• How to make Eclipse CDT's Linux GCC toolchain resolve C++ standard library headers?

  - by Muhammad Khan

  In Ubuntu 12.04 LTS I installed the Eclipse CDT plugin and opened the new hello world project to just test everything out. When I was creating the project, I chose the only toolchain: "Linux GCC" When the project is created, however, it says that #include<iostream> #include<cstdlb> are unresolved. Thus, lines with cout and endl can't be used and it cannot find std. using namespace std; is also causing problems. How can I get my #include directives for standard library headers recognized, to support code using the std namespace?

  Read the article

• General input/output error on OpenOffice 3.2

  - by Scott

  I have been working on a research paper in OpenOffice 3.2 Word Processor and I had a slide show OpenOffice 3.2 Presentation. I saved both frequently and they were not very big (no more then 5 pages of text or a few slides). A few days after I last edited and saved them, I tried to open the slide show but I received window saying: General Error. General input/output error When I tried opening the paper, it asked for ASCII Filter Options (font, character, language, and paragraph break). When I set the normal settings, a single blank document opened with nothing on it. I looked at both of the file's properties and the size was 0 or 1.5 KB, and the volume was unknown. I recently installed some updates for Ubuntu 10.10 and everything else in my computer is working normally including other documents and slide shows. Is this a fixable crash?

  Read the article

• Strange display language in gnome shell

  - by khalafuf

  I logged in gnome-shell, and found that the display language is set to some strange asian language (I think) without my prompt. I tried to change the locale settings but found that the default language is English (how?) despite of that strange language. Here's a snapshot, See the strange word instead of "Activity": I'm on Ubuntu 12.04 LTS. Output of locale: LANG=zh_CN.UTF-8 LANGUAGE=zh_CN:en_US:en LC_CTYPE="zh_CN.UTF-8" LC_NUMERIC=en_US.UTF-8 LC_TIME=en_US.UTF-8 LC_COLLATE="zh_CN.UTF-8" LC_MONETARY=en_US.UTF-8 LC_MESSAGES="zh_CN.UTF-8" LC_PAPER=en_US.UTF-8 LC_NAME=en_US.UTF-8 LC_ADDRESS=en_US.UTF-8 LC_TELEPHONE=en_US.UTF-8 LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=en_US.UTF-8 LC_ALL= Output of locale -a: C C.UTF-8 de_CH.utf8 en_AG en_AG.utf8 en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_IE.utf8 en_IN en_IN.utf8 en_NG en_NG.utf8 en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZM en_ZM.utf8 en_ZW.utf8 POSIX zh_CN.utf8 zh_SG.utf8 Solved: This answer did it.

  Read the article

• Problem when attempting to put Ubuntu One in panel (12.04)

  - by Mohd Arafat Hossain

  I wanted to put the Ubuntu One icon in the panel so I could see the progress of my sync but when I try this is what I get.... mohd-arafat-hossain@TUD:~$ sudo apt-get install ubuntuone-indicator [sudo] password for the-ubuntu-documentary: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ubuntuone-indicator : Depends: indicator-ubuntuone but it is not going to be installed E: Unable to correct problems, you have held broken packages. I have done these following steps before I did the above sudo add-apt-repository ppa:rye/ubuntuone-extras sudo apt-get update I have scanned for broken packages in Synaptic Package Manager but it shows that I have none. Any help?

  Read the article

• DHCP server with multiple interfaces on ubuntu, destroys default gateway

  - by Henrik Alstad

  I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

  Read the article

• Problems after bumblebee installation

  - by Samuel

  I tried to install bumblebee on Ubuntu 12.04 LTS by following steps on ubuntuwiki site. But when i used this code: sudo add-apt-repository ppa:bumblebee/stable && sudo apt-get update this output came out: Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.q0zzLiXVT3 --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 46C0364A882F14F899448FFCB22A95F88110A93A gpg: requesting key 8110A93A from hkp server keyserver.ubuntu.com gpg: key 8110A93A: "Launchpad PPA for Bumlebee Project" not changed gpg: Total number processed: 1 gpg: unchanged: 1 E: Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/bumblebee-stable-precise.list E: The list of sources could not be read. There´s also the same problem message when I try to run the update center. ´E:Type´ain´ is not known on line 3 in source list /etc/apt/sources.list.d/bumblebee-stable-precise.list, E:The list of sources could not be read., E:The package lists or status file could not be parsed or opened.´ I don´t know what to do since I´m a newbie at Linux. Thanks in advance, Samuel.

  Read the article

• Drupal and FTP server

  - by burak

  When I install a new module on Drupal, I get this error: Warning: ftp_login(): Login authentication failed in FileTransferFTPExtension-connect() (line 59 of /home/burak/ public_html/beytepe/includes/filetransfer/ftp.inc). Failed to connect to the server. The server reports the following message: Cannot log in to FTP server. Check username and password What can I do? How can I solve this?

  Read the article

• Did "sudo dconf reset -f /org/compiz". Now ccsm settings ignored

  - by bshanks

  I executed: sudo dconf reset -f /org/compiz Now changing settings in CompizConfig Settings Manager (ccsm) has no effect. For example, changing the number of desktops has no effect. I tried purging and reinstalling ccsm but it didn't help. Incidentally, where is the documentation for this sort of thing (which documentation specifies where Unity and Compiz store config settings?)? And where does dconf store things? And where is dconf's documentation? http://dag.wieers.com/home-made/dconf/dconf.1.html says nothing about the 'reset' command, and it says it stores things in /var/log/dconf, but nothing was there. Are there two things named 'dconf'? I would actually like to just put things back to where they were before I executed sudo dconf reset. I have a backup of my hard drive available, I just need to know which files to rollback. I tried rolling back the .config, .gconf, and .cache directories, to no avail. I'm using 12.04.

  Read the article

• Cant get lm-sensors to load ATI Radeon temp or fan

  - by woody

  New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get it working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

  Read the article

• How to set resolution higher than maximum shown?

  - by Olivier Lalonde

  I just bought an external monitor for my laptop (Asus VH242H) but cannot set its resolution to anything higher than 1600x900. I tried both from System/Administration/Monitors and the ATI Catalyst Control Center. There was a CD that came with the monitor but it only contains a Windows installer. According to the monitor's specifications: 23.6” 16:9 widescreen with 1920×1080 resolution enables borderless Full HD 1080p full-screen video display. My graphic card is an ATI Mobility Radeon HD 4670 and the monitor is currently connected to my laptop with a VGA cable. How can I set my external monitor to its maximum resolution?

  Read the article

• sudo apt-get update does not work for 12.10

  - by Brian Hawi

  hey i recently installed ubuntu 12.10 but the software center does not work i tried the sudo apt-get update because that worked when i was using ubuntu 11.04.... these are the errors hawi@hawi-HP-G62-Notebook-PC:~$ sudo apt-get update [sudo] password for hawi: Err http:ke.archive.ubuntu.com quantal InRelease Err http:ke.archive.ubuntu.com quantal-updates InRelease Err http:ke.archive.ubuntu.com quantal-backports InRelease Err http:ke.archive.ubuntu.com quantal Release.gpg Unable to connect to ke.archive.ubuntu.com:http: Err http:ke.archive.ubuntu.com quantal-updates Release.gpg Unable to connect to ke.archive.ubuntu.com:http: Err http:ke.archive.ubuntu.com quantal-backports Release.gpg Unable to connect to ke.archive.ubuntu.com:http: Err http:security.ubuntu.com quantal-security InRelease Err http:security.ubuntu.com quantal-security Release.gpg Unable to connect to security.ubuntu.com:http: [IP: 91.189.92.190 80] Err http:extras.ubuntu.com quantal InRelease Err http:extras.ubuntu.com quantal Release.gpg Unable to connect to extras.ubuntu.com:http: Reading package lists... Done W: Failed to fetch http:ke.archive.ubuntu.com/ubuntu/dists/quantal/InRelease W: Failed to fetch http:ke.archive.ubuntu.com/ubuntu/dists/quantal-updates/InRelease W: Failed to fetch http:ke.archive.ubuntu.com/ubuntu/dists/quantal-backports/InRelease W: Failed to fetch http:security.ubuntu.com/ubuntu/dists/quantal-security/InRelease W: Failed to fetch http:extras.ubuntu.com/ubuntu/dists/quantal/InRelease W: Failed to fetch http:ke.archive.ubuntu.com/ubuntu/dists/quantal/Release.gpg Unable to connect to ke.archive.ubuntu.com:http: W: Failed to fetch http:ke.archive.ubuntu.com/ubuntu/dists/quantal-updates/Release.gpg Unable to connect to ke.archive.ubuntu.com:http: W: Failed to fetch http:ke.archive.ubuntu.com/ubuntu/dists/quantal-backports/Release.gpg Unable to connect to ke.archive.ubuntu.com:http: W: Failed to fetch http:security.ubuntu.com/ubuntu/dists/quantal-security/Release.gpg Unable to connect to security.ubuntu.com:http: [IP: 91.189.92.190 80] W: Failed to fetch http:extras.ubuntu.com/ubuntu/dists/quantal/Release.gpg Unable to connect to extras.ubuntu.com:http: W: Some index files failed to download. They have been ignored, or old ones used instead. (note i have removed the // after http because the site does not allow me to post more than two links) what could be the issue?

  Read the article

• Downgrade to Nautilus 3.4 from Ubuntu 13.10 / Nautilus 3.8

  - by duxk.gh

  I just updated to Ubuntu 13.10 and greatly dislike Nautilus 3.8 that comes with it. In Ubuntu 13.04 I used the instructions in this article to get back some of the features from Nautilus 3.4, but unfortunately that doesn't work anymore. I particularly miss dividing up the window with F3 to have two folders show at the same time. The new search function I also find pretty terrible. I checked out Nemo but I would much prefer downgrading to Nautilus 3.4.

  Read the article

• Long pause in pxe/preseed install

  - by Bo Kersey

  I'm encountering a long pause during unattended (preseeded) install of precise server via pxe. The install eventually works, but appears to just sit there for 20 or 30 minutes after it authenticates the mirror. There is nothing in the logs during this time, even with full debug. Log excerpt: Aug 2 13:29:59 net-retriever: Signature made Fri Aug 2 06:05:28 2013 UTC using DSA key ID 437D05B5 Aug 2 13:29:59 net-retriever: gpgv: Aug 2 13:29:59 net-retriever: Good signature from "Ubuntu Archive Automatic Signing Key <[email protected]>" Aug 2 13:29:59 net-retriever: Aug 2 13:50:10 anna[5072]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Aug 2 13:50:10 anna[5072]: DEBUG: resolver (efi-modules): package doesn't exist (ignored) Bug related to this problem that is not being worked. I'm surprised that no one else is complaining about this. Or, is there some other way to do an unattended install that everyone else is using?

  Read the article

• How to mount an external Soundcard during startup?

  - by Moe

  I have an external sound card (Soundblaster XFi HD) connected to my Ubuntu 12.04 32-bit. that won't show up automatically after booting. After each boot process I need to plug the card out of the USB port and reconnect it, then it is found by the system and automatically used. I would like to either have it connected automatically during the boot process or at least have a little script or something which I can use after booting so that I don't have to manually plug the device off and on. Please note that I'm a total noob. If you don't mind please tell me the procedure step by step. Also, if I need to get some information via the terminal I'd need to be told the precise command to get it.

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >