Search Results

Search found 11607 results on 465 pages for 'disabling features and an'.

Page 163/465 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Free Hosting control panel

  - by John Maxim

  I'm in the mid of researching for one of the best hosting control panels. The server I run is Ubuntu and I have some experience with ISPConfig 2 & 3. Since I haven't explored any others available, what are the recommended ones for an Ubuntu server? I asked because I find that there seems to be some disabling and modifications required for an Ubuntu server if I need to use ispconfig which causes the server to change its actual way of running. It's quite good though, but any more recommended ones ? Something more organic? which doesn't require much breaking and changing. I'm not asking for the simple one, I don't mind going extra mile to install a powerful one but just try sticking with most Ubuntu's conventions will be an ideal one for me. And of course, if there happens to be something that meets the requirement as mentioned "Ubuntu conventions" and also simple to install at the same time, that'd be a bonus. Thanks in advance.

  Read the article

• How to prevent Microsoft Lync adding startup entry in Windows?

  - by Naresh

  Microsoft lync makes my laptop boot very slowly and if I disable it from startup, the laptop boots fine and quick. However the issue is, if I start lync again, it puts an entry to startup. So I end up disabling again and again before every boot. I try to put my laptop into sleep only as much possible, however there are many times I need to start up. So, please suggest how to do any of the following? How to remove a program from start up, programatically or a windows setting? How to disable Microsoft lync to stop putting an entry into startup?

  Read the article

• xDebug on Zend Server CE under Windows XP

  - by Hippyjim

  I have Zend Server installed on my Windows XP development machine, installed when I was naive and didn't know that Eclipse was going to become so suck so badly for PHP development. I've made the upgrade to Netbeans, but for debugging they only support xDebug. To be fair I've never used "proper" debuggers before, but other folks have raved about them so I thought I'd give it a try. I followed some directions on the Zend forum about how to install xDebug on Zend server, disabling Zend Debugger in the process. The xDebug "custom installation instructions" wizard tells me that my PHP was compiled with an unsupported compiler (MS VC8), and won't let me download anything. I tried a couple of the other xDebug binaries, but they just refused to load. So I'm left without a debugger option. Does anyone know how I can change the compiler of the php version I have installed so I can use a debugger in Netbeans? or how else i can get xDebug to install on Zend Server?

  Read the article

• change default port of IIS and let another process to listen on port 80 (Windows Server 2008)

  - by aleroot

  I have an installation of Windows Server 2008 running IIS 6 with a website listening on port 8080, even though I have moved the website to listen on 8080, port 80 is still kept in use by IIS (for truth by the kernel process : System - ProcId : 4). I want to let another process listen on port 80 without uninstalling or disabling IIS, I want to keep IIS listening on port 8080 and another service on port 80, is there a way to do it? I saw another similar thread here on serverfault but the solution (using httpcfg.exe delete iplisten -i 0.0.0.0:80 ) can work only in 2003 because in 2008 the utility httpcfg.exe doesn't exist and it seems that it cannot be installed ... Does anyone have a solution to get rid of the kernel listening on port 80 in Windows Server 2008 with IIS running?

  Read the article

• Sonicwall settings for Polycom TFTP

  - by Michael Glenn

  I'm switching our VoIP phones (Polycom 301s and 501s) to our data network. They were previously segmented to their own network. This means disabling the DHCP on the Trixbox (Asterisk) server and configuring the Sonicwall TZ 210 DHCP to indicate that Trixbox is the TFTP server. The Polycom phones are stating "could not contact boot server". All phones are configured to TFTP and were confirmed working when previously using the Trixbox server for DHCP. Trixbox DHCP is now turned off. I've configured options 66(as String), 128(as IP) and 150(as IP) in DHCP and added them to a TFTP Option Group. I've enabled "Allow BOOTP Clients to use Range" for the Dynamic IP range and assigned the Option Group TFTP as the DHCP Generic Option Group. Any idea what I'm missing? Is there a separate tool to inspect the DHCP response to compare Trixbox to the Sonicwall?

  Read the article

• asus eee pc 1018p os installation

  - by cornerback84

  My friend has an asus eee pc 1018p. It has no cd/dvd drive (neither do he have a usb cd/dvd drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But midway to installation it was interrupted and the computer was restarted (not h/w or s/w issue but we did it). Now we cannot run the backup and we also tried to install windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs usb device driver to continue. It has USB 3.0 maybe thats why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't runs and when booting from USB it says that it needs device driver. Anyone has any idea what we should do?

  Read the article

• How do I stop Firefox on Ubuntu from trying to load whatever is in my clipboard when I middle-click

  - by therefromhere

  In Firefox on Ubuntu, if I middle-click anywhere on a page that's not a link, it seems to treat whatever text is in the clipboard as a URL and tries to load it. This is annoying, since if I either accidentally click the middle button or (more often) miss a link when trying to middle-click it, I'll either go to whatever URL is in my clipboard or get an alert saying: The URL is invalid and cannot be loaded Is there any way of either: a) Disabling this functionality so that middle-click on a non-link does nothing (maybe an about:config setting?, or b) Making the functionality more intelligent, so that it will only try and open text if it looks like a URL (this seems like a job for a plugin).

  Read the article

• 256 SSD / 2TB Internal drive, i7, 16GB RAM.. explorer.exe still slow

  - by web_dvlp_sd

  OK, so I just got done tweaking my brand new PC and explorer.exe still manages to be sluggish not as snappy as I'd like or expected at all. Specs are i7 4th gen processor, 16GB RAM, windows 7 64 home premium on 256GB SSD, secondary internal 2TB drive. I assumed system would be lightning fast, been doing a bunch of researching and switched out a lot of different settings including enabling/disabling indexing, turning pagefile on/off or placing it on separate drive, turning folder optimization options on/off.. changes have been minimal or none at all. Any further advice or anything I might be missing, besides a new/repair install? PC is literally 3 days old I don't feel like I need a new install at all

  Read the article

• Cannot remove wireless network profile even though admin account is used

  - by David Karlsson

  On my windows computer which is connected to a company domain. I have problems with the wireless networking. First of all the computer fails to connect. Second of all I cannot remove the network from the list of wireless profiles. The properties window simply claims that "This network is administered by the Administartor Account". I am currently logged in as the local administrator. I have also tried creating a new admin account and still get the same problem when trying to remove the network. My computer has only the microsoft security essentials antivirus and some VMWare+virtual box connections that I can figure might interfere, but disabling realtime protection has not helped me on this. I also cannot delete the virtual network adapters from the control panel / network adapters...

  Read the article

• Linux (Kubuntu 9.10): Strange DNS problem [seems to be IPv6 issue]

  - by Homer J. Simpson

  Hi, I'm experiencing strange problems with my Kubuntu 9.10 when doing DNS requests from various applications. The requests are extremely slow, so loading any pages in Firefox or Konqueror, doing package installations in Kpackagemanager and other apps is really painful, while for example Opera doesnt have any problems, and ping is normally fast as well for DNS pings. I checked the proxy settings of both the used applications as well as of the general system and there are none, so to me it doesn't seem as there was something inbetween.. Does anybody have an idea on what to check for possible problem sources or how to solve this ? I'm behind a DSL home router which does the DHCP (and works well with my other computer). Any kind of advice would be really helpful. Edit: It seems to be some kind of IPv6 problem, as I could get it to work by disabling IPv6 explicitly in Firefox. Is there a general solution to this ?

  Read the article

• Configuring IIS 7.5 to be FIPS 140.2 compliant

  - by tomfanning

  I need to configure IIS 7.5 (Server 2008 R2) to be FIPS 140.2 compliant. Specifically, this involves disabling all SSL protocols other than TLS 1.0. I have set the following registry keys: HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server to Enabled(DWORD) = 0 as per this KB, but SSL Labs' checker says "SSL 2.0+ Upgrade Support" is enabled. (Everything other than that and TLS 1.0 is not available, so we're getting somewhere). It also says "FIPS ready - no" - presumably because SSL 2.0+ Upgrade Support is still enabled. serversniff.net says SSL 2.0 is turned off, and doesn't say anything about SSL 2.0+ Upgrade Support. Could this be an anomaly with SSL Labs' checker?

  Read the article

• Windows 7 won't read from NAS on LAN

  - by Alfy

  I've got a Linkstation NAS drive on a local network. Having just got a new laptop with Windows 7 Home Professional, I can no longer read anything of the drive. I've tried accessing the drive using \192.168.1.55\share, using ftp programs such as WinSCP, filezilla and even using firefox to hit ftp://192.168.1.55. The really annoying thing is that through these methods I can see the files on the drive, counting out any kind of connection issues. I can navigate through the NAS file system, but as soon as I try and copy a file off the NAS, things just stop working. Accessing the drive through a WindowsXP machine works fine. So far I've tried: Disabling firewalls Adding the LmCompatibilityLevel key to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa Using the 40 - 56 bit encryption instead of the 128 bit. Has anyone got any suggestions of what I can check or try. This is driving me crazy and I'm totally out of ideas? Thanks

  Read the article

• Turning off Chrome's visual effects

  - by Wesley

  Is there any way to turn off the visual effects used by Google Chrome? For example, the tabs slide around smoothly, the scrolling is really smooth, and there is a huge arrow that fades in and out during download. Reason why I'd like to know is primarily because I want to maximize battery life on my netbook by using less visual effects and, secondly, because I use Chrome on slower systems and would like to maximize the performance and efficiency of Chrome. This applies mainly to Windows XP, but also Vista, 7 and even (X)Ubuntu 9.10. EDIT1: Oh yes... disabling the attaching/detaching of tabs and turning them into translucent in the process. That's a bit stressful on my slower machines.

  Read the article

• Changing aspect ratio of Virtualbox VM under OSX

  - by Sambo

  I have a Windows guest on an OSX host, running at 1024x768. I want to use scale-mode to make the window small enough to have on the side of my screen, but the problem is that since I maximised the VM in scale mode earlier, the aspect ratio is now nearer my 16:10. I've tried resizing in only one dimension, disabling and re-enabling scale mode and also reinstalling guest additions. A search of the Virtualbox docs does tell me that maintaining aspect ratio is doable under OSX, but it doesn't say how. I'd really like to be able to fix this without reinstalling my VM if possible. I'm running Virtualbox 4.2.16 r86992 under OSX 10.8.4 with a Window 7 guest.

  Read the article

• Deal Slider malware removed, Windows Script Host Error message persisting

  - by Jason Decker

  I somehow got "Deal Slider" which was detected by Malwarebytes, so I let the program delete it. Now, every time I start my computer, I get the message from Windows Script Host that says: Can not find script file "C:\Users\Jason\Appdata\Local\Deal Slider\repair.js". Beep boop beep. This is a very odd message, because I can't find any trace of Deal Slider on my system now, and the \Deal Slider\ directory doesn't even exist anymore. I have already tried disabling WSH, but then I get a message that WSH is disabled. I also tried changing the file association of .js and .jse to Notepad. How can I make this error stop happening?

  Read the article

• Word 2007 cannot open old doc files anymore

  - by nilsi

  Since last week I am unable to open old doc files with Microsoft Word 2007. Whenever I try that I first get a warning about converters being a security issue. (I can disable that in the registry). After accepting (or disabling) this warning, however, I just get the following error message: Unglütiger Datentyp (Word 6.0/95 für Windows & Macintosh which means in English: Invalid document type (Word 6.0/95 for Windows & Macintosh I tried to goolge both the German and the translated error message but did not find anything related. The files in question can be opened by other users for the windows terminal server without problems.

  Read the article

• Tablet pen loses pressure sensitivity after screensaver

  - by Rohit Nair

  Tablet: Genius MousePen 8x6 System: Windows 7 64-bit The question says it all. When I first boot up my machine, the tablet works fine, with pressure sensitivity functionality. However, if I leave the machine long enough for the screensaver to start up, when I return, the tablet works just like a mouse, and does not respond to changes in pen pressure. Unplugging and replugging the device does not fix the problem. Disabling and enabling the device in device manager does not fix the problem. When I try to use the tablet config tool -before- screensaver, the pressure config works fine. It gives you a little area where you can draw to test out the pressure. When I try to use the same tool -after- screensaver, the moment I click on that drawing area, the config tool freezes.

  Read the article

• webserver running as nobody cannot resolve domain names

  - by jalal

  if i try to run the following: <?php echo file_get_contents("http://www.yahoo.com/index.html"); ?> through the web server I get a an "php_network_getaddresses: getaddrinfo" error. If I run the same file from the shell with: php test.php then I get the expected file output. This indicates to me that the 'nobody' user, which the webserver runs as, is not able to resolve the domain name, but the shell user can. Any ideas on how to fix this? Further info: CentOS 6, cPanel install, Apache, PHP running as dso. BTW, I've tried disabling the firewall to no effect.

  Read the article

• Is opening ports in the firewall bad?

  - by Steven

  From what little I know about networking, opening ports lets external data get sent in. But how that data is handled is entirely up to the applications running on my machine. So if I'm not running any malicious applications, there should be nothing wrong with disabling the firewall, right? Also, how do applications work when ports aren't forwarded? For example, I need to forward port TCP 6112 to host Blizzard games, but I've heard that HTTP uses port 80, but I haven't forwarded that port, yet Firefox still works. Btw I'm using Windows Vista.

  Read the article

• Post Error, Fixed/Removable Media Error

  - by Dan

  Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

  Read the article

• Certain web pages are suddenly not rendering properly in FireFox

  - by LeopardSkinPillBoxHat

  I am using FireFox 3.6.3. I noticed in the last couple of days that several webpages which I visit regularly are not rendering properly. A lot of the text is overlapping with other text and it basically looks like the style sheet is completely screwed up. I have tried disabling all of my Add-Ons and it doesn't make a difference. When I use Coral IE Tab to render the pages using IE they display without any problems. The websites which are not rending properly for me are: The Age Google Reader One interesting thing I noticed is that if I modify the Google Reader URL to not use SSL (i.e. change https to http) it renders without any issues. However, The Age website is not using SSL, and that still doesn't render properly. I have also disabled my Proxy Server (I normally use one at work) but this doesn't make a difference either.

  Read the article

• How to stop basic Postfix after-queue script from BCC-ing sender?

  - by mjbraun

  I'm building a content filter for Postfix (2.9.3 package installed via apt on an Ubuntu 12.04 test VM) and I'm starting with a very basic Ruby (1.9.3) template and building up functionality. Strangely, when the script is enabled, messages sent are being forwarded on as normal, but also sent back to the sender which is not normal. Disabling the script disables this behavior. Any suggestions about what I have to change to stop that from happening? Thanks for any advice! /etc/postfix/master.cf (only the lines changed from the default) smtp inet n - - - - smtpd -o content_filter=dumper:dummy ... dumper unix - n n - 10 pipe flags=RF user=mailuser argv=/home/mailuser/mailfilter/dumper.rb ${sender} ${recipient}` /home/mailuser/mailfilter/dumper.rb #!/usr/bin/env ruby require 'open3' dir="/home/mailuser/emails" logfile="maillog.log" message = $stdin.read cmd = "/usr/sbin/sendmail -G -i #{ARGV[0]} #{ARGV[1]}" stdin, stdouterr, wait_thr = Open3.popen2e(cmd) stdin.print(message) logfile = File.open("#{dir}/#{logfile}", 'a') logfile.write(stdouterr) stdin.close stdouterr.close exit(0)

  Read the article

• Ubuntu 9.10 x86_32 with PAE causes graphics issues, mainly slowness

  - by widgisoft

  I've tried the 64bit version and found I was constantly hitting a brick wall trying to get 32bit stuff to run; I'd previously used PAE on 9.04 without any issues so figured I'd give it a shot. However, on 9.10 it seems PAE or the process of enabling PAE breaks the nvidia drivers/module somewhat as performance is terrible; I can't even enable desktop effects and there's lots of artifacting on random controls. Disabling the pae image and rebooting fixes the issue however I'm then stuck with "only" 2.7Gb of ram and unable to use the full 8gb that's installed. Is there somthing special I need to do when using pae and nVidia drivers or should I be using 64bit and just figure out how to force run 32bit packages? :-p

  Read the article

• Administrator File Modification Privilege

  - by Leigh Riffel

  Windows Server 2008 apparently allows an application to somehow configure the folder so that any changes made within the folder require administrator level access. I login with an account that has administrator privileges, but is not the local administrator account. When I do so I find that I can't save changes to files opened within this folder. I know I can open the application as administrator or move the file out of the folder, make the change, then move it back in, but I'm hoping there is a better way short of disabling the protection entirely. Is there a way perhaps to remove it for the files I frequently edit?

  Read the article

• Bandwidth preserving browsing mode

  - by Elazar Leibovich

  I'm looking at some methods to browse the web, in situations where bandwidth is scarce (such as, flaky wifi connection, or mobile phone internet provider who overcharges the bandwidth). One thing that would save alot of bandwidth is not downloading images while browsing. This approach has two main drawbacks Sometimes a site's layout depends of images. There are some images you wish to see (thus disabling images downloading through firefox settings is not quite convenient). I'm looking therefor for a method that would allow me to Use some heuristic to find out which images are related to the website layout and allow them to be downloaded. Select a particular image from a website, download and display it. Maybe there's a firefox extension for that?

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >