Search Results

Search found 5756 results on 231 pages for 'cpu utilization'.

Page 164/231 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Ubuntu 12.04 Frequent Kernel Panics

    - by Jordan Johns
    Dealing with what seems to be quantum behavior here. I'm having frequent Kernel panics and the problem is very hard to locate. To cut to the chase of what is going on I am essentially getting this screen: This occurs always after login (login screen is fine, can go into my TTY's and everything). But once I log in I have anywhere from 0 (instant) to 10 seconds before everything grinds to a halt and freezes. The only way I found out that it was a kernel panic was going into a TTY while it happens. At first, I figured something must be wrong with memory. Ran memtest86, full standard test. No errors. OK. CPU problem? Windows works fine, ran prime95 and a bunch of other torture tests for many hours. Drive problem? Nope. fsck reports no problems and the smart status is ok. Overclocking problem? Nope. Windows is working fine, and I also reset the bios to prove the point it was not the cause. At a loss here, even trying to reinstall the thing it gives me the same problem even attempting to install ubuntu (like right after you try to select "install ubuntu" or "try ubuntu first before installing"). Anyone have any thoughts? Its very bizarre, its as if my system hates linux and is trying to tell me not to use it (that would be a terrible reality). Thanks!

    Read the article

  • HP Pavilion 15 with AMD dual graphics - Ubuntu live environment not starting

    - by creepus
    I've had this laptop for about a day now and have decided to try Ubuntu on it and determine if I want to install it. I created a USB, it booted (Secure Boot was on, I tried with Secure Boot off to no effect), and then the problem occurred. The screen turned off for a second, turned back on to a black screen, shut off again and turned back on with a dialogue box telling me that the system had to use low-graphics mode. I clicked OK, selected low-graphics mode from the menu and clicked OK. The screen switched to the boot messages and did not go any further than this. Ctrl+Alt+DEL started rebooting the laptop though. I tried booting again, but this time I edited the boot options in GRUB to add nomodeset. This time, the laptop only booted to a black screen. Ctrl+Alt+F2 took me to a prompt, I tried startx from there, but X didn't start, complaining that it wanted kernel mode setting back. I can not seem to find any option to disable one graphics chip or the other in the UEFI setup menus. Laptop : HP Pavilion 15-E004AU. The CPU : AMD A6-4400M APU with Radeon(tm) HD Graphics The graphics chip : AMD Radeon HD 7520G + 8670M Dual Graphics. The Ubuntu version : 13.10, 64 bit. Thanks. EDIT: I tried 12.04.3 LTS, it managed to bring the desktop up. There are severe graphics glitches after about two minutes though.

    Read the article

  • How to document requirements for an API systematically?

    - by Heinrich
    I am currently working on a project, where I have to analyze the requirements of two given IT systems, that use cloud computing, for a Cloud API. In other words, I have to analyze what requirements these systems have for a Cloud API, such that they would be able to switch it, while being able to accomplish their current goals. Let me give you an example for some informal requirements of Project A: When starting virtual machines in the cloud through the API, it must be possible to specify the memory size, CPU type, operating system and a SSH key for the root user. It must be possible to monitor the inbound and outbound network traffic per hour per virtual machine. The API must support the assignment of public IPs to a virtual machine and the retrieval of the public IPs. ... In a later stage of the project I will analyze some Cloud Computing standards that standardize cloud APIs to find out where possible shortcomings in the current standards are. A finding could and will probably be, that a certain standard does not support monitoring resource usage and thus is not currently usable. I am currently trying to find a way to systematically write down and classify my requirements. I feel that the way I currently have them written down (like the three points above) is too informal. I have read in a couple of requirements enineering and software architecture books, but they all focus too much on details and implementation. I do really only care about the functionalities provided through the API/interface and I don't think UML diagrams etc. are the right choice for me. I think currently the requirements that I collected can be described as user stories, but is that already enough for a sophisticated requirements analysis? Probably I should go "one level deeper" ... Any advice/learning resources for me?

    Read the article

  • invitation: Oracle Endeca Information Discovery Bootcamp

    - by mseika
    The Oracle Endeca Information Discovery (OEID) Boot Camp is designed to give partners an understanding of OEID’s features, and how it complements the existing Oracle Business Intelligence suite. Participants will learn how to develop & implement solutions using a Data Discovery method. Training is in EnglishWhat will be covered?The Oracle Endeca Information Discovery (OEID) Boot Camp is a three-day class with a combination of lecture and hands-on exercises, tailored to make participants aware of the Oracle Endeca Information Discovery platform, and to gain valuable skills for the implementation of projects.The course will follow a combination of lectures and hands-on lab sessions, to allow participants to apply the knowledge they have gained by extracting from sample data sources, and creating an end-user application that will be used to answer several business questions. What You Will Learn Architecture: OEID Components, use of graphs, overview of clustering OEID Installation: Architecture planning, infrastructure requirements, installation process, production hints & tips OEID Administration: Data store management, administrative operations, portal configuration, data sources, system monitoring Indexing: Integration Suite, Data source analysis, Graph (ETL) creation, record design techniques Portlets: Studio portlets, custom portlet development, querying functions Reporting: Studio applications & best practices, visualizations, EQL PrerequisitesYou must bring a laptop with you for the Hands-on labs ENVIRONMENT – LAPTOP REQUIREMENTS For the OEID boot camp, participants will perform the hands-on lab exercises using a virtual machine image. These virtual machines will be provided to participants within a cloud environment, requiring participants to bring a laptop to the Boot Camp that can access a Windows server utilizing Microsoft RDP from their laptop. Participants will not need to install any software onto their laptops, but must ensure that they have the proper software installed for their OS, to connect through RDP to a server. HARDWARE • CPU: Dual-core, x64, 1.8Ghz or higher • RAM: 2GB SOFTWARE • Microsoft Remote Desktop Client • Internet Explorer 7, Firefox, or Google Chrome This boot camp is intended for prospective implementers of Oracle Endeca Information Discovery (OEID), or those in a presales role looking to gain insight into the technical benefits of this new package. Attendees should have experience and familiarity with the basic concepts of business intelligence. Where and When ? Monday, October 15th until wednesday, October 17th included 9:00 - 18:00 Oracle France 15, boulevard Charles de Gaulle 92715 Colombes Access Register Here Limited number of seats !

    Read the article

  • How does one find out which application is associated with an indicator icon in Ubuntu 12.04?

    - by Amos Annoy
    It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? (the examination of SM points out a rather poignant factor in the faster depletion and shortened run time on battery - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously it was well under 10% in 10.04, between 5% and 7%!) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators

    Read the article

  • Video lags/freezes in SMPlayer and VLC

    - by RanRag
    When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

    Read the article

  • The Importance of Fully Specifying a Problem

    - by Alan
    I had a customer call this week where we were provided a forced crashdump and asked to determine why the system was hung. Normally when you are looking at a hung system, you will find a lot of threads blocked on various locks, and most likely very little actually running on the system (unless it's threads spinning on busy wait type locks). This vmcore showed none of that. In fact we were seeing hundreds of threads actively on cpu in the second before the dump was forced. This prompted the question back to the customer: What exactly were you seeing that made you believe that the system was hung? It took a few days to get a response, but the response that I got back was that they were not able to ssh into the system and when they tried to login to the console, they got the login prompt, but after typing "root" and hitting return, the console was no longer responsive. This description puts a whole new light on the "hang". You immediately start thinking "name services". Looking at the crashdump, yes the sshds are all in door calls to nscd, and nscd is idle waiting on responses from the network. Looking at the connections I see a lot of connections to the secure ldap port in CLOSE_WAIT, but more interestingly I am seeing a few connections over the non-secure ldap port to a different LDAP server just sitting open. My feeling at this point is that we have an either non-responding LDAP server, or one that is responding slowly, the resolution being to investigate that server. Moral When you log a service ticket for a "system hang", it's great to get the forced crashdump first up, but it's even better to get a description of what you observed to make to believe that the system was hung.

    Read the article

  • Can't run minecraft on ubuntu 12.04 lts [duplicate]

    - by user170011
    This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

    Read the article

  • Weird system freeze. Nothing works keyboard/mouse/reset button - Ubuntu 12.04 64bits [closed]

    - by Simon
    I have fresh PC: i5 3570K with Intel 4000 onboard ASrock Z77 Extreme4-m 8GG RAM - Adata 1333Mhz... 1TB Seagate drive 7200rpm I've also fresh systems - Ubuntu/Win7 and today there was something strange. Ubuntu twice just freezed. Everything stopped, even keyboard and mouse wasn't responding. Even RESET button didn't work. Right now memtest is running, but I'd like to know, where else can i look for cause. Can it be software fault if even reset isn't working? Only long reset pressing rebooted PC... I'm a bit confused. Or should I test components - CPU, motherboard, disk. Which logs in Ubuntu should I check to diagnose cause? EHm I had few adventures with this PC already. Shipped motherboard was broken (ASrock Z68 Extreme3) and had old bios, so I had to contact with reseller, replace it and at the end decided on Z77, but everything took 3 weeks, so I have bad feelings... Edit: Both freezes were during editing something in gedit (it can be coincidence) and after few updates today - when memtest is end I'll check what was updated

    Read the article

  • Kubuntu 11.10 very slow during file I/O

    - by dko
    After updating to Kubuntu 11.10, my file I/O performance has slowly just gotten worse and worse. It is to the point where I'm getting 1 MB/s write/read speeds to the drive. If I download something, the whole machine becomes unresponsive for at times up to 30 seconds. This usually causes a timeout in the download and the download then stops. Even extracting archive files, while extracting the computer is just unusable on top of the terrible read/write speeds. It isn't the drive as I have Windows installed as well and when I boot to it I have no issues with the drive. I did not have this issue using Kubuntu 11.04 and am thinking of downgrading. However, I'd much rather help out the Ubuntu community by working through these issues. I'm starting to lean towards the new Linux Kernel is just not working well with file handles. During file I/O my system usage does pick up, but it is not 100% CPU usage. My system is as follows. Samsung 2 TB hard disk drive AMD Phenom II x6 1055 4 GB RAM (only one in use according to system monitor) ATI 5850 HD

    Read the article

  • How should we deal with multiple transaction-report requests?

    - by Mithir
    We are developing a system for the retail market which one of it's features will enable clients(actually consumer clubs) to go through all transactions made by end-clients. One of the ways to get this information will be via an API. The idea is that there will be requests for reports with a start date and an end date, and a response will have all the transactions between those dates. We are worry that some reports may be very large, and that some clients will repeatedly request for reports, in this case the DB and CPU will be very overloaded. The same server that will service those requests, also takes care the the actual retail transactions (received by proprietary devices) and a Web application. We are not sure about how to limit the report requests from the API so that it won't affect the system too much. So, how should we deal with this scenario? any thoughts? EDIT: just to make clear: When I mentioned proprietary devices I meant "On-Location" devices which are used during sales with end-clients, this means that these requests shouldn't get delayed, and this is the main concern.

    Read the article

  • How to determine if a 3D voxel-based room is sealed, efficiently

    - by NigelMan1010
    I've been having some issues with efficiently determining if large rooms are sealed in a voxel-based 3D rooms. I'm at a point where I have tried my hardest to solve the problem without asking for help, but not tried enough to give up, so I'm asking for help. To clarify, sealed being that there are no holes in the room. There are oxygen sealers, which check if the room is sealed, and seal depending on the oxygen input level. Right now, this is how I'm doing it: Starting at the block above the sealer tile (the vent is on the sealer's top face), recursively loop through in all 6 adjacent directions If the adjacent tile is a full, non-vacuum tile, continue through the loop If the adjacent tile is not full, or is a vacuum tile, check if it's adjacent blocks are, recursively. Each time a tile is checked, decrement a counter If the count hits zero, if the last block is adjacent to a vacuum tile, return that the area is unsealed If the count hits zero and the last block is not a vacuum tile, or the recursive loop ends (no vacuum tiles left) before the counter is zero, the area is sealed If the area is not sealed, run the loop again with some changes: Checking adjacent blocks for "breathable air" tile instead of a vacuum tile Instead of using a decrementing counter, continue until no adjacent "breathable air" tiles are found. Once loop is finished, set each checked block to a vacuum tile. Here's the code I'm using: http://pastebin.com/NimyKncC The problem: I'm running this check every 3 seconds, sometimes a sealer will have to loop through hundreds of blocks, and a large world with many oxygen sealers, these multiple recursive loops every few seconds can be very hard on the CPU. I was wondering if anyone with more experience with optimization can give me a hand, or at least point me in the right direction. Thanks a bunch.

    Read the article

  • How to squeeze the maximum performance out of Unity and GNOME 3?

    - by melvincv
    I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

    Read the article

  • Ubuntu 10.04 hung on unattended apt-get upgrade?

    - by hafichuk
    I'm looking into why our ubuntu web server hung this morning and see that there was some package upgrades a few hours prior to the problem. I was able to ssh into the system and get a snapshot from top: top - 08:13:54 up 210 days, 8:25, 2 users, load average: 433.30, 422.40, 375.70 Tasks: 1192 total, 381 running, 810 sleeping, 0 stopped, 1 zombie Cpu(s): 0.5%us, 6.1%sy, 0.0%ni, 93.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 49549772k total, 48518392k used, 1031380k free, 960152k buffers Swap: 11595768k total, 279368k used, 11316400k free, 39355664k cached This is a 16 processor system, so I would typically expect a load in the low teens. I tried to restart apache, which didn't work, and subsequently had to do a hard reboot to get it working again (which it is). One thing I found was that the server did an unattended package update. Is it possible that upgrading php or curl (which our web sites use) might have caused apache to stop responding? Here is the snip from the unattended-upgrades.log from this morning: 2012-09-18 06:48:30,076 INFO Initial blacklisted packages: 2012-09-18 06:48:30,076 INFO Starting unattended upgrades script 2012-09-18 06:48:30,077 INFO Allowed origins are: ["['Ubuntu', 'lucid-security']"] 2012-09-18 06:49:37,017 INFO Packages that are upgraded: gnupg-curl php5-dev linux-server dhcp3-common linux-libc-dev php5-curl gpgv gnupg linux-headers-server linux-image-server php5 php5-mysql php-pear php5-cli php5-common libapache2-mod-php5 dhcp3-client 2012-09-18 06:49:37,018 INFO Writing dpkg log to '/var/log/unattended-upgrades/unattended-upgrades-dpkg_2012-09-18_06:49:37.017909.log'

    Read the article

  • Best Usage of Multiple Computers For a Developer

    - by whaley
    I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

    Read the article

  • Why would video stutter on HDMI but not on DVI?

    - by CorvT
    I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

    Read the article

  • Ubuntu running like mud, system hangs and looks like its running at 3FPS

    - by user240803
    the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

    Read the article

  • Making efficeint voxel engines using "chunks"

    - by Wardy
    Concept I'm currently looking in to how voxel engines work with a view to possibly making one myself. I see a lot of stuff like this ... https://sites.google.com/site/letsmakeavoxelengine/home/chunks ... which talks about how to go about reducing the draw calls. What I can't seem to understand is how it actually saves draw call counts on the basis of the logic being something like this ... Without chunks foreach voxel in myvoxels DrawIfVisible() With Chunks foreach chunk in mychunks DrawIfVisible() which then does ... foreach voxel in myvoxels DrawIfVisible() So surely you saved nothing ?!?! You still make a draw call for each visible voxel do you not? A visible voxel needs a draw call in either scenario. The only real saving I can see is that the logic that evaluates a chunk will be able to determine if a large number of voxels are visible or not effectively saving a bit of "is this chunk visible" cpu time. But it's the draw calls that interest me ... The fewer of those, the faster the application. EDIT: In case it makes any difference I will probably be using XNA (DX not OpenGL) for my engine so don't consider my choice of example in the link above my choice of technology. But this question is such that I doubt it would matter.

    Read the article

  • Correct architecture for running and stopping complex tasks in the background

    - by Phonon
    I'm having trouble working out the correct architecture for the following task. I have a GUI in Windows Forms that contains a ListBox, listing certain architectural layouts. One an item in this list is selected, a custom Control displays an interactive visualization of the selected layout. Drawing of this interactive diagram is a CPU-intensive task, and can take up to a second on my machine. The kind of functionality I'm trying to achieve is that if a user wants to quickly scroll through the layouts in the ListBox (say, holding down the down arrow key), I don't want my computer to sit there thinking about how to draw the layout before it allows the user to do anything else. The obvious answer is, of course, to run the layout calculations in a separate thread. But how do I make that thread return a whole control? How do I make sure I'm not running two layout calculations at once? I'm fairly new to this complex GUI business. So the real question is what is the right architecture to implement something like this? This seems like something people do all the time, but finding any suggestions on how to do it properly is really difficult.

    Read the article

  • What to do when 'dpkg --configure -a' fails with too many errors?

    - by rudivonstaden
    During an upgrade from lucid (10.04) to precise (12.04), the X session froze, and I have been trying to recover the upgrade to get a stable system. I have performed the following steps: Used ssh to log in to the stalled system over the network. Checked the contents of the /var/log/dist-upgrade directory. There was no activity on main.log, apt.log or term.log. top showed that process 'precise' was using about 3% CPU, but I could find no evidence that the upgrade process was still doing anything. 'dpkg' did not show up in top, but it came up with pgrep dpkg | xargs ps Killed the 'dpkg' and 'precise' processes Tried to recover the upgrade by running sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a. This was partially successful (some packages were configured), but failed with the message Processing was halted because there were too many errors. I ran the same command a few times, and each time some packages were configured but others failed. Tried running sudo apt-get -f install. It fails with similar errors to dpkg. The current situation is that dpkg --configure -a and sudo apt-get -f install fails with two kinds of error: Dependency issues, e.g.: dpkg: dependency problems prevent configuration of cifs-utils: cifs-utils depends on samba-common; however: Package samba-common is not configured yet. dpkg: error processing cifs-utils (--configure): dependency problems - leaving unconfigured Resource conflict, e.g.: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Additionally, it seems there's reference to potential boot problems, so I'm not keen to reboot without fixing the install first: dpkg: too many errors, stopping Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab So my question is, how to get a working install when dpkg --configure -a fails?

    Read the article

  • Hosting and scaling of a facebook application on cloud?

    - by DhruvPathak
    We would be building a facebook application in django(Python), but still not sure of where to host it economically,and with a good provision to scale in case the app gets viral. Some details about the app: i) Would be HTML based like a website,using django as a framework. ii) 100K is the number of expected pageviews in a day,if the app is viral. iii) The users will not generate any media content,only some database data will be generated by them. It would be great if someone with more experience can guide on following points: A) Hosting on google app engine or Amazon EC2 or some other cloud like RackSpace : Preferable points found in AppEngine were ease of deployment,cost effectiveness and easy scaling. For EC2: Full hold of the virtual machine,Amazon NoSQL and RDMBS database services in case we decide to use them. B) Does backend technology affect monthly cost ? eg. would CPU and memory usage difference of Django over , for example , PHP framework like CodeIgnitor really make remarkable difference in running costs. ( Here is the article that triggered this thought process : http://journal.dedasys.com/2010/01/12/rough-estimates-of-the-dollar-cost-of-scaling-web-platforms-part-i#comments) C) Does something like Heroku , which provides additional services over Amazon EC2, prove to be better than raw cloud management ? It is not that we are trying for premature scaling, we just want to have a good start so that we are ready to handle unpredicted growth and scale.

    Read the article

  • Improving the efficiency of my bloom/glow shader

    - by user1157885
    I'm making a neon style game where everything is glowing but the glow I have is kinda small and I want to know if there's an efficient way to increase the size of it other than increasing the pixel sample iterations. Right now I have something like this: float4 glowColor = tex2D(glowSampler, uvPixel); //Makes the inital lines brighter/closer to white if (glowColor.r != 0 || glowColor.g != 0 || glowColor.b != 0) { glowColor += 0.5; } //Loops over the weights and offsets and samples from the pixels based on those numbers for (int i = 0; i < 20; i++) { glowColor += tex2D(glowSampler, uvPixel + glowOffsets[i] + 0.0018) * glowWeights[i]; } finalColor += glowColor; for the offsets it moves up, down, left and right (5 times each so it loops over 20 times) and the weights just lower the glow amount the further away it gets. The method I was using before to increase it was to increase the number of iterations from 20 to 40 and to increase the size of the offset/weight array but my computer started to have FPS drops when I was doing this so I was wondering how can I make the glow bigger/more vibrant without making it so CPU/Gcard intensive?

    Read the article

  • Buffer System For Items

    - by Ohmages
    I am going to reference this image of what I want to accomplish in JavaScript. This is the Diablo buffer system. This question may be a bit advanced (or possibly not even allowed). But I was wondering how you might go about implementing this type of system in a JavaScript game. Currently to implement such a system in JavaScript escapes me, and I am turning to SO to get some suggestions, ideas, and hopefully some insight in how I could accomplish this without being to costly on the CPU. Some thoughts of mine for implementing such a system would be to: Create DIVS within a DIV that hold each position of the inventory Go through each item you own in a container and see which DIV it belongs to Make said item images the DIVs image This type of system might possibly work if ALL items were 1x1, but for this example its not going to work out. I am at a complete lost of ideas how to even accomplish this. Although, maybe rendering directly to the canvas and checking mouse cords could work, there would more than likely be A HUGE annoyance when checking if other items are overlapping each other (meaning you cant place the item down, and possibly switching item with the cursor item ). That said, what am I left with? Do I need to makeshift my own hack system with messy code, or is there some source out there (that I don't know about) that has replicated this type of system in their own game. I would be very grateful to get some replies on how you might go about doing this, and will accept answers that can logically explain how you might implement such a system (code is not required). P.S. Id like to use pure JavaScript, and nothing else (even though it might be "reinventing the wheel", I also like to learn).

    Read the article

  • Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

    - by Ohgodwhy
    I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

    Read the article

  • How to uninstall Ubuntu 12.04 LTS dual booting with Windows 7?

    - by user103799
    I need to uninstall Ubuntu 12.04 LTS from my laptop. It's currently dual booting with windows 7. I've searched and found some ways to do this, but all use some kind of a CD to complete the deletion. I have neither the Ubuntu Live CD nor Windows Install CD/Recovery CD. This laptop did not come with one, and I unfortunately have no available storage device to make a recovery CD. Is there a way to completely uninstall Ubuntu 12.04 LTS dual booting without using any hardware? If there's no way, then how to uninstall using the least hardware possible? Or easy to find hardware? I've nothing against Ubuntu. I installed this as a backup/alternative to error-prone Windows 7. However, after a hardware upgrade, including extra RAMs and a new, better CPU, Windows 7 runs smoothly again. Now I'm running low on hard drive space and need the 40 gig or so of space I partitioned for Ubuntu back. Any help is appreciated, and thanks in advance!

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >