Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 164/346 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Acer Aspire One AOA 150 netbook health monitoring software

  - by iceman

  I have a Acer Aspire One AOA 150 with Windows Xp Home. I want to monitor the voltages from the power supply, the temperature of the system, the CPU and fan speeds. Much like the functionality of GKrellM(though I haven't used this on the netbook yet) , a GTK applet designed to make an impressive panel of monitors or xsensors in Linux. Is this possible with the netbook? I want a software for Windows 7 and Windows Xp.

  Read the article

• How to get ASUS UEFI BIOS EZ Mode utility on my asus laptop?

  - by Manoj Kumar

  i have asus laptop with the following specs: Manufacturer ASUSTeK Computer Inc. Model K53SC (CPU 1) Version 1.0 Chipset Vendor IntelBIOS Brand American Megatrends Inc. Version K53SC.208 Chipset Model Sandy Bridge BIOS Brand American Megatrends Inc. Version K53SC.208 Operating System MS Windows 7 Ultimate 64-bit In the BIOS setting i have enabled 'UEFI' but im not unable to see the graphical interface of UEFI.

  Read the article

• Coldfusion autorestart

  - by Comcar

  Coldfusion is automatically restarting, a lot. It comes in waves, everything seems fine for a while then the server struggles for a few minutes, restarts a lot then settles down again. I have Fusion Reactor installed, but when CF goes down FR stops logging so it's not really helping. Looking through the archived logs just shows gaps in the logs. These are all the occourances of the phrase "Coldfusion started" today. [root@server2 logs]# grep -i "Coldfusion started" server.log | grep "11/27/12" "Information","main","11/27/12","01:49:35",,"ColdFusion started" "Information","main","11/27/12","01:50:46",,"ColdFusion started" "Information","main","11/27/12","01:52:39",,"ColdFusion started" "Information","main","11/27/12","01:54:08",,"ColdFusion started" "Information","main","11/27/12","01:55:12",,"ColdFusion started" "Information","main","11/27/12","01:56:29",,"ColdFusion started" "Information","main","11/27/12","01:57:36",,"ColdFusion started" "Information","main","11/27/12","01:58:57",,"ColdFusion started" "Information","main","11/27/12","01:59:56",,"ColdFusion started" "Information","main","11/27/12","02:01:38",,"ColdFusion started" "Information","main","11/27/12","02:03:11",,"ColdFusion started" "Information","main","11/27/12","02:04:41",,"ColdFusion started" "Information","main","11/27/12","02:07:53",,"ColdFusion started" "Information","main","11/27/12","02:10:45",,"ColdFusion started" "Information","main","11/27/12","02:11:49",,"ColdFusion started" "Information","main","11/27/12","02:13:09",,"ColdFusion started" "Information","main","11/27/12","02:14:18",,"ColdFusion started" "Information","main","11/27/12","02:15:44",,"ColdFusion started" "Information","main","11/27/12","02:17:06",,"ColdFusion started" "Information","main","11/27/12","02:34:19",,"ColdFusion started" "Information","main","11/27/12","03:01:20",,"ColdFusion started" "Information","main","11/27/12","05:25:59",,"ColdFusion started" "Information","main","11/27/12","06:30:48",,"ColdFusion started" "Information","main","11/27/12","06:36:20",,"ColdFusion started" "Information","main","11/27/12","09:34:07",,"ColdFusion started" "Information","main","11/27/12","09:35:39",,"ColdFusion started" "Information","main","11/27/12","09:36:41",,"ColdFusion started" "Information","main","11/27/12","09:39:15",,"ColdFusion started" "Information","main","11/27/12","09:40:42",,"ColdFusion started" "Information","main","11/27/12","09:42:55",,"ColdFusion started" "Information","main","11/27/12","09:44:23",,"ColdFusion started" "Information","main","11/27/12","09:46:18",,"ColdFusion started" "Information","main","11/27/12","09:47:35",,"ColdFusion started" "Information","main","11/27/12","09:48:53",,"ColdFusion started" "Information","main","11/27/12","09:50:04",,"ColdFusion started" "Information","main","11/27/12","09:51:51",,"ColdFusion started" "Information","main","11/27/12","09:53:05",,"ColdFusion started" "Information","main","11/27/12","09:54:24",,"ColdFusion started" "Information","main","11/27/12","09:55:28",,"ColdFusion started" "Information","main","11/27/12","09:56:38",,"ColdFusion started" "Information","main","11/27/12","09:58:03",,"ColdFusion started" "Information","main","11/27/12","09:59:03",,"ColdFusion started" "Information","main","11/27/12","10:04:37",,"ColdFusion started" "Information","main","11/27/12","12:04:02",,"ColdFusion started" I've been looking at the live server metrics in FR on a second screen all day, the CPU, Memory and requests all seemed fine about 12 midday, then the server rebooted. Looking at the logs for the hour between 9am and 10am (more than 15 restarts in the hour), the CPU never went over 44% usage and the Memory never exceeded 53% usage - in the recorded stats at least. There is no JDBC tracking at the moment, so I'll add that to tracking and see if it's MySQL causing a problem, but can anyone help me narrow down the problem, what would cause Cold Fusion to auto restart, and I'm assuming the auto restart is only happening because Fusion Reactor is installed. It's a Red Hat 5 LAMP stack running Coldfusion 9 and Fusion Reactor 4.5.2

  Read the article

• apache2 mod_deflate static content

  - by rizen

  I have a server serving up a JS file a few million times a day using apache2. Some of my users would like the JS to be gzipped. Does anyone know how apache2 mod_deflate handles compression of static files? Will it compress the js for each request(in which case I'd be worried about cpu load)? If it does, is there a way to pre-compress the JS files so apache2 wouldn't have to do this for each file?

  Read the article

• Perfmon: which counter identifies that threads are waiting?

  - by frankadelic

  While load testing an ASP.NET app, we find that the pages are taking 20-30 sec under heavy load. We suspect this is because the pages are waiting for database calls or web services. Is there a particular perfmon counter that can identify this sort of bottleneck on the web servers? CPU, Memory, and Disk are normal. Or must we use a tool other than perfmon to track down this bottleneck?

  Read the article

• How to install Archlinux on a acer emachines em350 ?

  - by zillion

  Do a 64 bits version will work better if the cpu is 64 bits capable ? Can I remove all added stuffs on Archbang or CTKArchLive to return to plain Archlinux with openbox that I can configure myself easily, so I can install Archlinux faster ? I tried and installed Arch properly but I need to install the broadcom bcm 4727 driver (b43,wl,sta,open source), which driver do I need and how can I install it by my usb on Archlinux CLI made with base, sudo and wireless_tools only ?

  Read the article

• Unclear pricing of Windows Azure

  - by Dirk

  How do you people think about the Windows Azure pricing model and the way it is presented to the user? I just found out that Azure keeps charging hours for STOPPED instances. I just received a bill from more than 100 euro for 3 STOPPED instances (not) running "HelloAzure". I the past I also played around with Amazon Web Services. Amazon doesn't charge for stopped instances. I was wondering: "Should I have known this before, or is Microsoft doing a bad job in clear communication in the pricing model?" Quote from http://www.microsoft.com/windowsazure/pricing/ : Compute time, measured in service hours: Windows Azure compute hours are charged only for when your application is deployed. When developing and testing your application, developers will want to remove the compute instances that are not being used to minimize compute hour billing. Partial compute hours are billed as full hours. I read this, so I stopped all instances after a few hours playing around. Now it seems I should have deleted them, not just "stopped". Strictly speaking, all depends on the definition of the word "deployed". If you upload an application, but it is not running, can it still be regarded as being "deployed"? May be, but when you read this for the first time, with AWS experience in mind, I don't think it's 100% clear what this means. Technically speaking, an uploaded application only uses (read: should only use / needs only) a few MB harddrive space. It doesn't require any CPU time. If Azure wants to reserve CPU's for not running instances.. well, that's Azure's choice, not mine. I don't want to spread a hate campaign at all, but I do want to know how people think about this subject. Should Microsoft be more clear about their pricing model or do you think it's clear enough? Second question: did anyone got refunded for a similar case? Thanks in advance! UPDATE 27-01-2011 I sent an email to customer support a few days ago, but I guess that didn't reach anu human being because I didn't hear anything from it. So, I made a telephone call today with a Dutch customer support representative (I live in Holland). She totally understood the problem and she's trying to get a refund for me. However, she mentioned that "usually these refund requests are denied", but she's going to try. She also mentioned that I'm not the first one with this (or similar) problem. UPDATE 28-01-2011 I just received a phonecall from Microsoft support. The lady told me some good news: the money will refunded. However, the invoice has not been made yet, and my creditcard will first be chardged, after which it will be refunded, but hey, that's no problem for me! I'm glad the way it's solved! Thanks everybody!

  Read the article

• Errors from ALSA during Arch Linux boot

  - by Macha

  Everytime I boot my Linux system, I get these errors while ALSA boots. Despite these, the sound still works, so these are more of an annoyance than anything. How do I stop these occuring? Unknown hardware: "HDA-Intel" "IDT 92HD73C1X5" "HDA:111d7675,10280256,00100202" "0x1028" "0x0256" Hardware is initialized using a guess method /usr/sbin/alsactl: set_control:1255: failed to obtain info for control #6 (No such file or directory) /usr/sbin/alsactl: set_control:1255: failed to obtain info for control #7 (No such file or directory)

  Read the article

• How can I set Windows Developer Preview resolution to 1920x1080 screen resolution

  - by Eugenio Miró

  I have a new monitor which I'm sharing between two computers: a laptop with Windows 7 (Win7 from now on) and a home assembled desktop with Windows Developer Preview (WinDev from now on). Win7 recognizes the monitor resolution of 1920x1080, and many others. WinDev doesn't; the best resolution I get on that OS is 1600x1200. Win7 has: Mobile Intel 965 Express video Generic PnP Monitor as monitor #2 WinDev has: MSI NVidia 9600GT with 1Gb RAM video Generic Non PnP Monitor I'm using Belkin Flip USB to share the monitor between boxes

  Read the article

• ubuntu 12.04 is unresponsive

  - by Andreas Schiemann

  I've been using ubuntu 12.04 for 3 weeks. Today it become unresponsive and I lost stuff I was working on, I had the hand displayed, as if I selected something but in fact never did, but was reading an article online. I finally powered down the machine and then turned it back on. In windows there is the Task Manager where one can see whats taking up all your CPU or RAM, is there a such a program in ubuntu 12.04 and if not, can I install a app that has the same use?

  Read the article

• How do you fix the Performance Dashboard datetime overfow error

  - by Mike L

  I'm a programmer/DBA by accident and we're running SQL Server 2005 with Performance Dashboard for basic monitoring. The server has been up for a few weeks and now we can't drill into certain reports. Is there any way to reset these reports without a complete reboot? edit: I bet the error message would help. I get this when I drill into the CPU graph: Error: Difference of two datetime columns caused overflow at runtime.

  Read the article

• Wake on Lan password.

  - by user18151

  I have a Windows 7 machine, with Intel 82567LM LAN Card. I am trying to enable Wake on Lan with password. Can somebody please tell me how to set the password for Wake on Lan. I shall be grateful for any pointers/links etc. Thanks. PS. Can someone please suggest a small utility for wake on lan, that supports password.

  Read the article

• Capacity Planning IIS6

  - by user45457

  Hello, I am planning to host 5000 site with separate application pool. Based on my estimate there are around 1600- 2000 worker process will be running on the server. So my question is: Is is possible to host 5000 sites on a server with IIS 6. Server Configuration: 16 Core @ 2.27 Ghz CPU 8 GB RAM Please tell me if u require any other information. Kartik

  Read the article

• .NET 3.5 SP1 Installer hang at around 80%

  - by kuoson

  Hi, I was trying to install .NET 3.5 SP1 to one of our production machines with Windows 2003 SP2. However, the installer just hang at around 80% with message "Setup is loading installation components, This may take a minute or two". In fact it's been like that for 30mins already and using 0% CPU. I disabled the anti-virus software and then applied the windows installer 4.5 update but no luck, the installer still hangs. Anyone had this problem before?

  Read the article

• Disable "longhaul" kernel module with a GRUB command?

  - by Julian Schweigert

  I've got a problem with a VIA C3 (1GHz)-system: the system freezes immediately when the CPU frequency goes under 731MHz because of an incompatibility with the (not completely implemented) i686 commands and a powersave feature of the kernel. There is a workaround: deactivate the "longhaul" kernelmodule via alias longhaul off in /etc/modprobe.d/aliases. But the system freezes before I can install any Linux distribution - even Clonezilla freezes. Is there a possibility to deactivate the module with a GRUB boot parameter before the kernel is loaded?

  Read the article

• Ubuntu server has slow performance

  - by Rich

  I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

  Read the article

• HomeMade/DIY NAS solution

  - by MicTech

  Has anyone experience with building NAS (Network-attached storage) for home/small office using? What component would you recommend? Hardware CPU motherboard HDDs RAID controller etc. Software OS FTP HTTP etc.

  Read the article

• creating a 802.11n wireless network between laptops and asus n-13 wireless adapter

  - by xpugur

  I have a asus usb n-13 wireless adapter and 3 laptops in a home we try to create a network witn 802.11n standards but failed each time laptops have intel 5100 agn. We try to create network with wpa-2 personal encryption that also fails(couldn't connect) but with wep encryption connects but with 802.11g standard... so do you know how to create a 802.11N based network? ... thank you...

  Read the article

• Is GMABooster real? Is it spyware?

  - by bentford

  I just found out about GMABooster for OSX which supposedly boosts performance for the Intel GMA 950 in my mac mini. As anyone used this? Is it spyware? The site seems real but at the same time seems a little bit untrustworthy.

  Read the article

• Cant install KB 980368 "The update is not applicable to your computer"

  - by JK01

  I'm trying to install KB 980368 A update is available that enables certain IIS 7.0 or IIS 7.5 handlers to handle requests whose URLs do not end with a period on a new Windows 2008 R2 server, but no matter which of the download packages I try, they all say "The update is not applicable to your computer" I have Windows 2008 R2 Standard on an Intel Xeon E5520. I need that KB to have extenstionless URLs in ASP.NET MVC2. How can I fix this?

  Read the article

• How do you reset a Nexxt 54M Wireless AP Router?

  - by Fernando

  I have this Nexxt router, and I haven't been able to reset it correctly. I pressed the thin button in the back (which you have to press with a pen point or something similar, really slim), but haven't managed to make it work. The CPU, WLAN and power lights go on and remain still. The lights for the connected cables don't turn on...

  Read the article

• Status app for Windows?

  - by AngryHacker

  On the Mac, there is a hugely useful iStat Menus. It displays all kinds of statuses, such as CPU/RAM/Disk utilization, HD temperature, etc... Is there something similar for Windows XP?

  Read the article

• Why does limiting my virtual memory to 512MB with ulimit -v crash the JVM?

  - by Narinder Kumar

  I am trying to enforce maximum memory a program can consume on a Unix system. I thought ulimit -v should do the trick. Here is a sample Java program I have written for testing : import java.util.*; import java.io.*; public class EatMem { public static void main(String[] args) throws IOException, InterruptedException { System.out.println("Starting up..."); System.out.println("Allocating 128 MB of Memory"); List<byte[]> list = new LinkedList<byte[]>(); list.add(new byte[134217728]); //128 MB System.out.println("Done...."); } } By default, my ulimit settings are (output of ulimit -a) : core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31398 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 31398 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited When I execute my java program (java EatMem), it executes without any problems. Now I try to limit max memory available to any program launched in the current shell to 512MB by launching the following command : ulimit -v 524288 ulimit -a output shows the limit to be set correctly (I suppose): core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31398 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 31398 virtual memory (kbytes, -v) 524288 file locks (-x) unlimited If I now try to execute my java program, it gives me the following error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. Ideally it should not happen as my Java program is only taking around 128MB of memory which is well within my specified ulimit parameters. If I change the arguments to my Java program as below: java -Xmx256m EatMem The program again works fine. While trying to give more memory than limited by ulimit like : java -Xmx800m EatMem results in expected error. Why the program fails to execute in the first case after setting ulimit ? I have tried the above test on Ubuntu 11.10 and 12.0.4 with Java 1.6 and Java 7

  Read the article

• Snow Leopard on Core Duo

  - by Brendan Foote

  The first run of MacBook Pros have Core Duo processors, whereas all the ones after that have Core 2 Duos. Apple says Snow Leopard only requires an Intel processor, but will a first-gen MacBook Pro get enough of the improvements to be worth upgrading? This is similar to the question about Snow Leopard on an old iBook, but it differs because this processor is supported by Apple, but seems counter to the 64-bit theme of the upgrade.

  Read the article

• Fastest router for OpenWRT/etc?

  - by marienbad

  I realize OpenWRT Wiki hardware info tells CPU model and MHz for many routers, but MHz doesn't directly map to speed. So... as far as you know, what are some of the fastest OpenWRT-compatible wifi routers out there?

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >