Search Results

Search found 54615 results on 2185 pages for 'sql version patching'.

Page 1649/2185 | < Previous Page | 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656  | Next Page >

• Netscreen-Remote Equivalent On Linux

  - by mojah

  We're running a simple Juniper VPN tunnel (using Juniper SSG5's) for outside-network access, which works great for Windows PCs since they can connect using the supplied Netscreen-Remote VPN client. Has anyone successfully managed to get this working under Linux? There are several alternatives, but none seem to actually work. The following were tried, but failed: - http://www.prolixium.com/netscreenlinux - http://david.dw-perspective.org.uk/Juniper-Networks-SSL-VPN-Client-On-Linux.html The official version is no Linux Client will ever be developed by Juniper themselves, but perhaps other (open) software exists that has been found compatible to Juniper's VPN?

  Read the article

• Installing PHP Imagick with libmagickcore4

  - by Ali

  I have ImageMagick (version 6.6.9-7) on Ubuntu 12.04, which has libmagickcore4. When I tried to install PHP imagick, I received the following error: The following packages have unmet dependencies: php5-imagick : Depends: libmagickcore3 (>= 8:6.6.0.4) but it is not installable Depends: libmagickwand3 (>= 8:6.6.0.4) but it is not installable E: Unable to correct problems, you have held broken packages. Apparently, the problem is that php5-imagick is based on libmagickcore3 but a newer verion has been installed on my Ubuntu. Is there a way to instruct PHP imagick to use libmagickcore4?

  Read the article

• How to install Apache 2.4.3 on Ubuntu 12.04

  - by SFox

  I have a clean, fresh OS of Ubuntu 12.04 on my VPS. My goal is to install WordPress. I want to install the latest version of Apache (2.4.3) but I'm encountering two problems. I'm following instructions like this & this. Both produced the same errors. The first I encounter after running "./configure --prefix=/usr/local/apache2 --with-included-apr --with-included-apr-util " the system says "It must specify an install prefix, a build directory, or an apr-config file" The second I encounter immediately afterwards, when I attempt to run make or make install. "No targets specified and no makefile found. stop." I honestly have not been able to find a solution for either, and I'm now looking for some help from the community. Any help would be greatly appreciated.

  Read the article

• Windows clients unable to access Samba share on AD joined Linux box every 7 days

  - by Hassle2

  The problem: Every 7 days, 2 Windows Servers are unable to access a SMB/CIFS share. It will start working after a handful of hours. The environment: OpenFiler Linux box joined to 2003 AD Domain Foreground app on Win2003 server access the SMB/CIFS share with windows credentials Another process on Win2008 access the share via SQL Server with windows credentials The Samba version on the Linux box is 3.4.5. Security is set to ADS wbinfo and getent return back expected users and groups Does not look to be a double hop issue as it's always the 2 accounts, regardless of the calling user. There is a DNS entry in both forward and reverse lookup zone for the linux box The linux box's computer object in active directory shows that it was modified around/at the same time that the two clients started failing to access the share Trying to access the share via IP works when by name does not Rebooting the Windows server takes care of it (it's production and only restarted it once) Restarting smbd, winbind, nmbd had no effect Error in samba log for the client in question: smbd/sesssetup.c:342(reply_spnego_kerberos) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! The Question: Does this look like the machine account password is changing (hence the AD object showing the updated modified date) or are the two windows clients unable to request a new ticket that works against this linux box?

  Read the article

• Should windows services be created with custom users, or should I use one of LocalSystem/LocalServic

  - by Justin Dearing

  I'm asking the question in general for the average custom developed NT service or unix OSS daemon ported to windows with SCM support. However, at the moment my immediate concern is for mongodb. From my experience with UNIX I like all my services to run as different unprivileged users. The way this has translated to windows is as follows: Create a local (or domain if it has to talk to SQL server) windows user with a long random password (lately an ASCII85 encoded guid generated from a different machine). Set it to next expire and forbid it from changing its password. Remove that user from the "Users Group". Grant that user "Login as a Service" permission. Give it read permission to the folder where the app resides, and write permission to the logs and data files the applications use. Assign the user to the service. Troubleshoot until the service starts. My feeling is that the unprivileged users are less powerful than the 3 special service users. I also feel that by isolating which users run which services, I would limit collateral damage if a way to compromise one service was found.

  Read the article

• Problem with Windows activation on a VM (Virtual machine)

  - by Daisetsu

  I backed up a number of laptops to virtual machines before they are to be re-purposed, in case I need the data at some later time. While the Physical to VM processes worked fine I am encountering issues on some of the VMs. When I boot them I get an error message saying I MUST activate windows in order to login. This is expected because the hardware changed (from physical hardware to virtualized hardware). I click the OK button and expect to be prompted with ways to activate, windows sits there for quite a while then tells me that "Windows has already been activated". I click OK at that message and get take back to the beginning where I am asked to activate Windows. I have done some fairly intensive googling but haven't been able to find a real solution. EDIT: The laptops with the issues are 2 Sony Vaios, I believe that they have the OEM version of the OS originally installed by the factory.

  Read the article

• Is it possible to run two separate instances (copies, versions) of Audacity?

  - by cipricus

  What I want is two separate instances of Audacity running in parallel as to separate programs with different settings. I want one to use WASAPI as audio host and speakers as input device (the 2.0.5 portable has the WASAPI option), and the other to use the MME as audio host, and microphone as input device. When opening a new (second) window of the same installation/copy of Audacity, by executing twice the .exe file, it is the same as giving the command 'new' under 'File', what happens is not a second instance, but just a separate project/file and window. When settings are changed in one, they change exactly in the other. When trying to start a second copy of Audacity, or even a second different version, when one is already running, it will also open just a second project/file of the application that is already running, as before.

  Read the article

• Tunning scrolling in urxvt

  - by Ivan Petrushev

  Hello, I'm using rxvt-unicode version 9.06 at Ubuntu 9.10. I was used to aterm, where you can use SHIFT + up/down arrow to scroll the printed output with a line up or down. You can also use SHIFT + pgup/pgdown to scroll one screen up or down. In urxvt I can use the pgup/pgdown combination as well, but can't use the up/down arrow combination. It is very useful to be able to scroll by single lines. Do you have any idea how to enable the up/down arrow scrolling? This is my ~/.inputrc: set show-all-if-ambiguous on And this is my ~/.Xdefaults: URxvt*geometry:80x35 URxvt*transparent:true URxvt*shading:40 URxvt*saveLines:12000 URxvt*foreground:White URxvt*background:Blue URxvt*font: -*-terminus-*-*-*-*-14-*-*-*-*-*-*-* URxvt*color4:RoyalBlue URxvt*color12:RoyalBlue URxvt*scrollBar:true URxvt*scrollBar_right:false URxvt*scrollstyle:rxvt

  Read the article

• Excel Add-In not loading properly with 64-bit Excel 2013

  - by David Hyde

  I have an Excel Add-In saved to an .xla file in %appdata%\Microsoft\Addins. In the subject version of Excel it is checked on the Add-Ins list. One thing this addin does is create a drop-down menu in ThisWorkbook's Workbook_Open sub. But the menu is not created and there is no Add-Ins tab on the ribbon. No error messages. This works fine in Excel 2010 and 2007 (at least), and worked fine on the 32-bit Excel 2013 that came preinstalled on this system before I nuked it. The really maddening thing is that if I get rid of this addin and open that same .xla file, either by double-clicking or using the Open command in Excel, the menu appears as expected. I get the same behavior if I instead open the source .xls file - it all works. I've also tried saving to a .xlam file instead of .xla, but get the same bad result. Any ideas?

  Read the article

• Mac OS X Server add server user

  - by Meltemi

  What's the recommended way to add a user to Mac OS X Server that doesn't need all the hoopla associated with Workgroup Manager? There are many users pre-configured in Mac OS X Server (www, root, ldapadmin, etc.) that don't have "Full Name" or mail accounts, etc. I'd like to create a 'svn' user to be the owner of our Subversion Repository as per this tutorial: If you've decided to use either Apache or stock svnserve, create a single svn user on your system and run the server process as that user. Be sure to make the repository directory wholly owned by the svn user as well. From a security point of view, this keeps the repository data nicely siloed and protected by operating system filesystem permissions, changeable by only the Sub- version server process itself. Wondering if there's a way outside of WorkgroupManager and OpenDirectory as this account will be entirely server based. Is this still sound advice under OS X Server? If so what's the easiest way to create the user (Mac OS X Server doesn't seem to respond to useradd).

  Read the article

• Game login server

  - by Tar

  I have a setup like this: A website, with a database. This database houses accounts and all details. Password hashes/salts/join dates/etc. What I want to do is to be able to use this same database for our game database. The game will be on servers in the United States while the web server and web server database is in the Netherlands. I know there is a big problem with using remote SQL and we really don't want to do that as operation of the website is just as vital as operation of the game server. We had one solution that involved sending account details to another database hosted on the same server that the gameserver is hosted on, but that was incredibly unreliable because if the website was down, no new people could register to play the game. The solution that we want is to have a log in server that is used to check credentials for everything. Is this possible/viable and could anyone point in the right direction? So, in summation: 2 game servers 1 web servers 1 central database used for authorization. The game accounts and website accounts need to be one in the same.

  Read the article

• Create a folder shortcut in "My Computer"

  - by Carlos Gil

  I'm trying to add shortcuts to folders in "My Computer". This .reg almost works, I can execute programs like EXPLORE.exe, but I want to open a folder in the same window. Can someone please point out how? Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}] @="SkyDrive" "InfoTip"="Folder Shortcuts" [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\DefaultIcon] @="C:\\Users\\Carlos\\AppData\\Local\\Microsoft\\SkyDrive\\SkyDrive.exe,0" [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\Shell] [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\Shell\Open] @="" [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\Shell\Open\Command] @="C:\\Users\\Carlos\\SkyDrive" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{00000000-0000-0000-0000-000000000001}] @="SkyDrive"

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

• Install 64-bit Windows 7 on Mac Using Bootcamp

  - by Paul Lefebvre

  Has anyone been able to install Windows 7 x64 under Bootcamp on a Mac? I was able to get the 32-bit version to install, but I cannot get x64 to install. The Mac doesn't seem to even want to boot the DVD. And even if I get it installed are there drivers that will work with it? I'd prefer to have Windows 7 x64 because I'd like to use the entire 6GB RAM in my MacBook Pro. I'd appreciate any tips or advice.

  Read the article

• Why does this package (ppa:ondrej/php5, it's PHP 5.5) break the apache2 installation?

  - by Panique

  Problem Currently this package (ppa:ondrej/php5) is quite popular for installing the latest version of PHP 5.5. I've worked quite much with it, and everything ran smoothy, on several (dev) servers. But from today (?) this breaks the apache2 installation (it empties the /etc/apache2/sites-available/default file). This is reproduceable. Way to reproduce (on naked Ubuntu 64 12.04 LTS) // basic installs sudo apt-get update sudo apt-get install apache2 sudo apt-get install php5 Apache is fine, nano /etc/apache2/sites-available/default has valid content now // getting PHP 5.5.x sudo apt-get install python-software-properties (for add-apt-repository) sudo add-apt-repository ppa:ondrej/php5 sudo apt-get update sudo apt-get install php5 // php -v shows successful install of PHP 5.5.x now Apache is broken, nano /etc/apache2/sites-available/default is empty now Question Why does this happen ? According to https://launchpad.net/~ondrej/+archive/php5 there were no changes in the last few days.

  Read the article

• Trouble installing php memcache extension

  - by user35346

  I'm trying to install memcache on MAMP but I get the warning below, and when I continue it seems to complete properly. I add the line extension=memcache.so to the php.ini and restart MAMP but phpinfo() doesn't list the memcache extension. $ ./pecl install memcache downloading memcache-2.2.5.tgz ... Starting to download memcache-2.2.5.tgz (35,981 bytes) ..........done: 35,981 bytes 11 source files, building WARNING: php_bin /Applications/MAMP/bin/php5/bin/php appears to have a suffix 5/bin/php, but config variable php_suffix does not match running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 Enable memcache session handler support? [yes] : yes ... Build process completed successfully Installing '/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.5 configuration option "php_ini" is not set to php.ini location You should add "extension=memcache.so" to php.ini

  Read the article

• chown: changing ownership of `.': Invalid argument

  - by Pierre

  I'm trying to install some new files on our new server while our sysadmin is in holidays: Here is my df # df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb3 273G 11G 248G 5% / tmpfs 48G 260K 48G 1% /dev/shm /dev/sdb1 485M 187M 273M 41% /boot xxx.xx.xxx.xxx:/commun 63T 2.2T 61T 4% /commun as root , I can create a new directory and run chown under /home/lindenb # cd /home/lindenb/ # mkdir X # chown lindenb X but I cannot run the same command under /commun # cd /commun/data/users/lindenb/ # mkdir X # chown lindenb X chown: changing ownership of `X': Invalid argument why ? how can I fix this ? updated: mount: /dev/sdb3 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sdb1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) xxx.xx.xxx.xxx:/commun on /commun type nfs (rw,noatime,noac,hard,intr,vers=4,addr=xxx.xx.xxx.xxx,clientaddr=xxx.xx.xxx.xxx) version: $ cat /etc/redhat-release CentOS release 6.3 (Final)

  Read the article

• Using client certificates with wget

  - by Doc

  I cannot get wget to use the client certificates. The documentation speaks about using the --certificate flag. The use of the certificate flag is clear, I set it to use the PEM version of the client certificate. But when I connect I get the following error: HTTP request sent, awaiting response... Read error (error:14094410:SSL routines: SSL3_READ_BYTES:sslv3 alert handshake failure; error:140940E5:SSL routines:SSL3_ READ_BYTES:ssl handshake failure) in headers. Giving up. ssl handshake failure means the client did not supply a correct client cert. Still the client cert I use, works in a browser. Note: When I disable client authentication on the server, wget can connect. Note: The use of curl is suggested, but I'd like to avoid the switch.

  Read the article

• Windows 7 (32bit) not adding favorites to Windows Explorer

  - by bsigrist

  I am attempting to add several locations on my disk to my "Favorites" in Windows Explorer. I have used this feature in the 64bit version of Windows 7 without a problem, but it does not seem to work in this install. Here is my methodology so far. 1.) Go to a location in Windows Explorer "C:\users\Benjamin" 2.) Right click on the "favorites" in the left hand folder navigation window and select "Add current location to Favorites" It does not fire an error, but the location does not appear under favorites. What might be happening here to prevent "favorites" from populating?

  Read the article

• MSDTC - Communication with the underlying transaction manager has failed (Firewall open, MSDTC network access on)

  - by SocialAddict

  I'm having problems with my ASP.NET web forms system. It worked on our test server but now we are putting it live one of the servers is within a DMZ and the SQL server is outside of that (on our network still though - although a different subnet) I have open up the firewall completely between these two boxes to see if that was the issue and it still gives the error message "Communication with the underlying transaction manager has failed" whenever we try and use the "TransactionScope". We can access the data for retrieval it's just transactions that break it. We have also used msdtc ping to test the connection and with the amendments on the firewall that pings successfully, but the same error occurs! How do i resolve this error? Any help would be great as we have a system to go live today. Panic :) Edit: I have created a more straightforward test page with a transaction as below and this works fine. Could a nested transaction cause this kind of error and if so why would this only cause an issue when using a live box in a dmz with a firewall? AuditRepository auditRepository = new AuditRepository(); try { using (TransactionScope scope = new TransactionScope()) { auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#1", 1); auditRepository.Save(); auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#2", 1); auditRepository.Save(); scope.Complete(); } } catch (Exception ex) { Response.Write("Test Error For Transaction: " + ex.Message + "<br />" + ex.StackTrace); }

  Read the article

• Crystal Reports 8 - Error 533 PESStartPrintJob

  - by Federico Giust

  We have on the company I work for an application built in Delphi V with Crystal Reports 8. We all know that Crystal & Delphi can be temperamental sometimes and the worst thing is, nearly no detail on the error. Also there is a big lack of documentation on the web about this. There's lot of people with similar issue but no solution. The error I'm talking about in particular is the one on the image below. This happens when trying to print any Crystal Reports on screen. This has happened sometimes in the clients computer and it was hard for us to replicate on our environment. Since it's an old version of Crystal it is very hard to find any helpful documentation to know the exact source of the problem.

  Read the article

• Problems installing Linux to IDE connected compact flash card

  - by mathematician1975

  I have been trying to install Ubuntu on some hardware (Netcom NC-499 board that contains a Vortex86DX processor). I am trying to install to a compact flash card attached to the board via an IDE adaptor, the aim being that the board will boot up and simply treat the compact flash like a normal hard drive. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it onto the card. I have been trying using a USB CD-ROM drive and the standard .iso image from the ubuntu site (md5 checksum works out fine so no problem there) but I have had no success at all. I have been able to do this with Ubuntu 8.04 but with no other version (9.04 and 10.04 desktop and alternative discs all fail). My question is what other options are available to me to try and install this? I have googled myself apart trying to find out but other than a few sites describing USB based installs using flash memory sticks for very specific hardware, I have found no useful info at all. Any suggestions will be gratefully received.

  Read the article

• How to format DVD-RAM?

  - by AndrejaKo

  I have few DVD-RAM disks and when using udftools, specifically sudo mkudffs --media-type=dvdram /dev/sr0 where /dev/sr0 is my DVD-RAM drive, I get trying to change type of multiple extents and nothing happens. What should I do? EDIT After trying with dvd+tools, here's what I got: #dvd+rw-format /dev/dvd -format=full -ssa=default * BD/DVD±RW/-RAM format utility by <[email protected]>, version 7.1. * 4.6GB DVD-RAM media detected. * formatting 54.8| And same error as before from mkudffs.

  Read the article

• Best practices for settings for Oracle database creation

  - by Gary

  When installing an Oracle Database, what non-default settings would you normally apply (or consider applying) ? I'm not after hardware dependent setting (eg memory allocation) or file locations, but more general items. Similarly anything that is a particular requirement for a specific application rather than generally applicable isn't really useful. Do you separate out code/API schemas (PL/SQL owners) from data schemes (table owners) ? Do you use default or non-default roles, and if the latter, do you password protect the role ? I'm also interested in whether there's any places where you do a REVOKE of a GRANT that is installed by default. That may be version dependent as 11g seems more locked down for its default install. These are ones I used in a recent setup. I'd like to know whether I missed anything or where you disagree (and why). Database Parameters Auditing (AUDIT_TRAIL to DB and AUDIT_SYS_OPERATIONS to YES) DB_BLOCK_CHECKSUM and DB_BLOCK_CHECKING (both to FULL) GLOBAL_NAMES to true OPEN_LINKS to 0 (did not expect them to be used in this environment) Character set - AL32UTF8 Profiles I created an amended password verify function that used the apex dictionary table (FLOWS_030000.wwv_flow_dictionary$) as an extra check to prevent simple passwords. Developer logins CREATE PROFILE profile_dev LIMIT FAILED_LOGIN_ATTEMPTS 8 PASSWORD_LIFE_TIME 32 PASSWORD_REUSE_TIME 366 PASSWORD_REUSE_MAX 12 PASSWORD_LOCK_TIME 6 PASSWORD_GRACE_TIME 8 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME 1080 IDLE_TIME 180 LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Application login CREATE PROFILE profile_app LIMIT FAILED_LOGIN_ATTEMPTS 3 PASSWORD_LIFE_TIME 999 PASSWORD_REUSE_TIME 999 PASSWORD_REUSE_MAX 1 PASSWORD_LOCK_TIME 999 PASSWORD_GRACE_TIME 999 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME unlimited IDLE_TIME unlimited LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Privileges for a standard schema owner account CREATE CLUSTER CREATE TYPE CREATE TABLE CREATE VIEW CREATE PROCEDURE CREATE JOB CREATE MATERIALIZED VIEW CREATE SEQUENCE CREATE SYNONYM CREATE TRIGGER

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

< Previous Page | 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656  | Next Page >