Search Results

Search found 12325 results on 493 pages for 'remote execution'.

Page 165/493 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • Logging connection strings

    If you some of the dynamic features of SSIS such as package configurations or property expressions then sometimes trying to work out were your connections are pointing can be a bit confusing. You will work out in the end but it can be useful to explicitly log this information so that when things go wrong you can just review the logs. You may wish to develop this idea further and encapsulate such logging into a custom task, but for now lets keep it simple and use the Script Task. The Script Task code below will raise an Information event showing the name and connection string for a connection. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Get the connection string, we need to know the name of the connection Dim connectionName As String = "My OLE-DB Connection" Dim connectionString As String = Dts.Connections(connectionName).ConnectionString ' Format the message and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connectionName, connectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Dts.TaskResult = Dts.Results.Success End Sub End Class Building on that example it is probably more flexible to log all connections in a package as shown in the next example. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Loop through all connections in the package For Each connection As ConnectionManager In Dts.Connections ' Get the connection string and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connection.Name, connection.ConnectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Next Dts.TaskResult = Dts.Results.Success End Sub End Class By using the Information event it makes it readily available in the designer, for example the Visual Studio Output window (Ctrl+Alt+O) or the package designer Execution Results tab, and also allows you to readily control the logging by choosing which events to log in the normal way. Now before somebody starts commenting that this is a security risk, I would like to highlight good practice for building connection managers. Firstly the Password property, or any other similar sensitive property is always defined as write-only, and secondly the connection string property only uses the public properties to assemble the connection string value when requested. In other words the connection string will never contain the password. I have seen a couple of cases where this is not true, but that was just bad development by third-parties, you won’t find anything like that in the box from Microsoft.   Whilst writing this code it made me wish that there was a custom log entry that you could just turn on that did this for you, but alas connection managers do not even seem to support custom events. It did however remind me of a very useful event that is often overlooked and fits rather well alongside connection string logging, the Execute SQL Task’s custom ExecuteSQLExecutingQuery event. To quote the help reference Custom Messages for Logging - Provides information about the execution phases of the SQL statement. Log entries are written when the task acquires connection to the database, when the task starts to prepare the SQL statement, and after the execution of the SQL statement is completed. The log entry for the prepare phase includes the SQL statement that the task uses. It is the last part that is so useful, how often have you used an expression to derive a SQL statement and you want to log that to make sure the correct SQL is being returned? You need to turn it one, by default no custom log events are captured, but I’ll refer you to a walkthrough on setting up the logging for ExecuteSQLExecutingQuery by Jamie.

    Read the article

  • Mozilla Weave can't sync Firefox. What's wrong?

    - by Mehper C. Palavuzlar
    For the last few days, Mozilla Weave can't sync. Below is the activity log. Any ideas? 2010-05-02 20:47:15 Service.Main WARN Unknown error while downloading metadata record. Aborting sync. 2010-05-02 20:47:15 Service.Main CONFIG Starting backoff, next sync at:Sun May 02 2010 21:16:09 GMT+0300 (GTB Yaz Saati) 2010-05-02 20:47:15 Service.Main DEBUG Exception: aborting sync, remote setup failed No traceback available 2010-05-02 21:16:09 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-02 21:16:30 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global 2010-05-02 21:16:30 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2 2010-05-02 21:26:50 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/info/collections 2010-05-02 21:26:50 Engine.Clients INFO 0 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Clients INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Clients DEBUG Total (ms): sync 6, processIncoming 3, uploadOutgoing 0, syncStartup 3, syncFinish 0 2010-05-02 21:26:50 Engine.Bookmarks INFO 0 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Bookmarks INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Bookmarks DEBUG Total (ms): sync 13, processIncoming 5, uploadOutgoing 0, syncStartup 3, syncFinish 3 2010-05-02 21:26:50 Engine.Forms INFO 1 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Forms INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Forms INFO Uploading all of 1 records 2010-05-02 21:26:50 Collection DEBUG POST Length: 388 2010-05-02 21:27:06 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/forms 2010-05-02 21:27:06 Engine.Forms DEBUG Total (ms): sync 15924, processIncoming 3, uploadOutgoing 15918, syncStartup 3, syncFinish 0, createRecord 1 2010-05-02 21:27:06 Engine.History INFO 55 outgoing items pre-reconciliation 2010-05-02 21:27:06 Engine.History INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:09 Engine.History INFO Uploading all of 55 records 2010-05-02 21:27:09 Collection DEBUG POST Length: 35337 2010-05-02 21:27:32 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/history 2010-05-02 21:27:32 Engine.History DEBUG Total (ms): sync 25588, processIncoming 4, uploadOutgoing 25580, syncStartup 3, syncFinish 0, createRecord 2540 2010-05-02 21:27:32 Engine.Passwords INFO 0 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Passwords INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Passwords DEBUG Total (ms): sync 8, processIncoming 4, uploadOutgoing 0, syncStartup 4, syncFinish 0 2010-05-02 21:27:32 Engine.Prefs INFO 0 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Prefs INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Prefs DEBUG Total (ms): sync 8, processIncoming 3, uploadOutgoing 0, syncStartup 4, syncFinish 0 2010-05-02 21:27:32 Engine.Tabs INFO 1 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Tabs INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Tabs INFO Uploading all of 1 records 2010-05-02 21:27:32 Collection DEBUG POST Length: 393 2010-05-02 21:27:54 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/tabs 2010-05-02 21:27:54 Engine.Tabs DEBUG Total (ms): sync 21943, processIncoming 3, uploadOutgoing 21936, syncStartup 3, syncFinish 0, createRecord 8 2010-05-02 21:27:54 Service.Main INFO Sync completed successfully 2010-05-02 22:27:53 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-02 22:28:14 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global 2010-05-02 22:28:14 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2 2010-05-02 22:28:16 Net.Resource DEBUG GET fail 503 https://sj-weave03.services.mozilla.com/1.0/mehper/info/collections 2010-05-02 22:28:16 Service.Main DEBUG Exception: aborting sync, failed to get collections No traceback available 2010-05-02 23:28:15 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-03 00:26:42 Service.Main DEBUG Exception: Could not acquire lock No traceback available 2010-05-03 00:31:03 RecordMgr DEBUG Failed to import record: App. Quitting JS Stack trace: Res__request(...)@resource.js:208 < Res_get()@resource.js:271 < RecordMgr_import("https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global")@wbo.js:119 < WeaveSvc__remoteSetup()@service.js:824 < ()@service.js:1187 < WrappedNotify()@util.js:114 < WrappedLock()@util.js:86 < WrappedCatch()@util.js:65 < sync(false)@service.js:1146 < ([object Object])@service.js:414 < notify([object XPCWrappedNative_NoHelper])@util.js:629 2010-05-03 00:31:03 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2010-05-03 00:31:03 Service.Main WARN Unknown error while downloading metadata record. Aborting sync. 2010-05-03 00:31:03 Service.Main DEBUG Exception: aborting sync, remote setup failed No traceback available 2010-05-03 17:26:25 Service.Main INFO Loading Weave 1.2.3 2010-05-03 17:26:25 Engine.Bookmarks DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Forms DEBUG Engine initialized 2010-05-03 17:26:25 Engine.History DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Passwords DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Prefs DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Tabs DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Tabs DEBUG Resetting tabs last sync time 2010-05-03 17:26:25 Service.Main INFO Mozilla/5.0 (Windows; U; Windows NT 6.1; tr; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729) 2010-05-03 17:26:26 Service.Main DEBUG Caching URLs under storage user base: https://sj-weave03.services.mozilla.com/1.0/mehper/ 2010-05-03 17:26:30 Service.Main DEBUG Autoconnecting in 3 seconds 2010-05-03 17:26:36 Service.Main INFO Logging in user mehper 2010-05-03 17:45:46 Service.Main DEBUG Exception: Could not acquire lock No traceback available 2010-05-03 17:53:18 Service.Main DEBUG Exception: Could not acquire lock No traceback available

    Read the article

  • Inequality joins, Asynchronous transformations and Lookups : SSIS

    - by jamiet
    It is pretty much accepted by SQL Server Integration Services (SSIS) developers that synchronous transformations are generally quicker than asynchronous transformations (for a description of synchronous and asynchronous transformations go read Asynchronous and synchronous data flow components). Notice I said “generally” and not “always”; there are circumstances where using asynchronous transformations can be beneficial and in this blog post I’ll demonstrate such a scenario, one that is pretty common when building data warehouses. Imagine I have a [Customer] dimension table that manages information about all of my customers as a slowly-changing dimension. If that is a type 2 slowly changing dimension then you will likely have multiple rows per customer in that table. Furthermore you might also have datetime fields that indicate the effective time period of each member record. Here is such a table that contains data for four dimension members {Terry, Max, Henry, Horace}: Notice that we have multiple records per customer and that the [SCDStartDate] of a record is equivalent to the [SCDEndDate] of the record that preceded it (if there was one). (Note that I am on record as saying I am not a fan of this technique of storing an [SCDEndDate] but for the purposes of clarity I have included it here.) Anyway, the idea here is that we will have some incoming data containing [CustomerName] & [EffectiveDate] and we need to use those values to lookup [Customer].[CustomerId]. The logic will be: Lookup a [CustomerId] WHERE [CustomerName]=[CustomerName] AND [SCDStartDate] <= [EffectiveDate] AND [EffectiveDate] <= [SCDEndDate] The conventional approach to this would be to use a full cached lookup but that isn’t an option here because we are using inequality conditions. The obvious next step then is to use a non-cached lookup which enables us to change the SQL statement to use inequality operators: Let’s take a look at the dataflow: Notice these are all synchronous components. This approach works just fine however it does have the limitation that it has to issue a SQL statement against your lookup set for every row thus we can expect the execution time of our dataflow to increase linearly in line with the number of rows in our dataflow; that’s not good. OK, that’s the obvious method. Let’s now look at a different way of achieving this using an asynchronous Merge Join transform coupled with a Conditional Split. I’ve shown it post-execution so that I can include the row counts which help to illustrate what is going on here: Notice that there are more rows output from our Merge Join component than on the input. That is because we are joining on [CustomerName] and, as we know, we have multiple records per [CustomerName] in our lookup set. Notice also that there are two asynchronous components in here (the Sort and the Merge Join). I have embedded a video below that compares the execution times for each of these two methods. The video is just over 8minutes long. View on Vimeo  For those that can’t be bothered watching the video I’ll tell you the results here. The dataflow that used the Lookup transform took 36 seconds whereas the dataflow that used the Merge Join took less than two seconds. An illustration in case it is needed: Pretty conclusive proof that in some scenarios it may be quicker to use an asynchronous component than a synchronous one. Your mileage may of course vary. The scenario outlined here is analogous to performance tuning procedural SQL that uses cursors. It is common to eliminate cursors by converting them to set-based operations and that is effectively what we have done here. Our non-cached lookup is performing a discrete operation for every single row of data, exactly like a cursor does. By eliminating this cursor-in-disguise we have dramatically sped up our dataflow. I hope all of that proves useful. You can download the package that I demonstrated in the video from my SkyDrive at http://cid-550f681dad532637.skydrive.live.com/self.aspx/Public/BlogShare/20100514/20100514%20Lookups%20and%20Merge%20Joins.zip Comments are welcome as always. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • “Query cost (relative to the batch)” <> Query cost relative to batch

    - by Dave Ballantyne
    OK, so that is quite a contradictory title, but unfortunately it is true that a common misconception is that the query with the highest percentage relative to batch is the worst performing.  Simply put, it is a lie, or more accurately we dont understand what these figures mean. Consider the two below simple queries: SELECT * FROM Person.BusinessEntity JOIN Person.BusinessEntityAddress ON Person.BusinessEntity.BusinessEntityID = Person.BusinessEntityAddress.BusinessEntityID go SELECT * FROM Sales.SalesOrderDetail JOIN Sales.SalesOrderHeader ON Sales.SalesOrderDetail.SalesOrderID = Sales.SalesOrderHeader.SalesOrderID After executing these and looking at the plans, I see this : So, a 13% / 87% split ,  but 13% / 87% of WHAT ? CPU ? Duration ? Reads ? Writes ? or some magical weighted algorithm ?  In a Profiler trace of the two we can find the metrics we are interested in. CPU and duration are well out but what about reads (210 and 1935)? To save you doing the maths, though you are more than welcome to, that’s a 90.2% / 9.8% split.  Close, but no cigar. Lets try a different tact.  Looking at the execution plan the “Estimated Subtree cost” of query 1 is 0.29449 and query 2 its 1.96596.  Again to save you the maths that works out to 13.03% and 86.97%, round those and thats the figures we are after.  But, what is the worrying word there ? “Estimated”.  So these are not “actual”  execution costs,  but what’s the problem in comparing the estimated costs to derive a meaning of “Most Costly”.  Well, in the case of simple queries such as the above , probably not a lot.  In more complicated queries , a fair bit. By modifying the second query to also show the total number of lines on each order SELECT *,COUNT(*) OVER (PARTITION BY Sales.SalesOrderDetail.SalesOrderID) FROM Sales.SalesOrderDetail JOIN Sales.SalesOrderHeader ON Sales.SalesOrderDetail.SalesOrderID = Sales.SalesOrderHeader.SalesOrderID The split in percentages is now 6% / 94% and the profiler metrics are : Even more of a discrepancy. Estimates can be out with actuals for a whole host of reasons,  scalar UDF’s are a particular bug bear of mine and in-fact the cost of a udf call is entirely hidden inside the execution plan.  It always estimates to 0 (well, a very small number). Take for instance the following udf Create Function dbo.udfSumSalesForCustomer(@CustomerId integer) returns money as begin Declare @Sum money Select @Sum= SUM(SalesOrderHeader.TotalDue) from Sales.SalesOrderHeader where CustomerID = @CustomerId return @Sum end If we have two statements , one that fires the udf and another that doesn't: Select CustomerID from Sales.Customer order by CustomerID go Select CustomerID,dbo.udfSumSalesForCustomer(Customer.CustomerID) from Sales.Customer order by CustomerID The costs relative to batch is a 50/50 split, but the has to be an actual cost of firing the udf. Indeed profiler shows us : No where even remotely near 50/50!!!! Moving forward to window framing functionality in SQL Server 2012 the optimizer sees ROWS and RANGE ( see here for their functional differences) as the same ‘cost’ too SELECT SalesOrderDetailID,SalesOrderId, SUM(LineTotal) OVER(PARTITION BY salesorderid ORDER BY Salesorderdetailid RANGE unbounded preceding) from Sales.SalesOrderdetail go SELECT SalesOrderDetailID,SalesOrderId, SUM(LineTotal) OVER(PARTITION BY salesorderid ORDER BY Salesorderdetailid Rows unbounded preceding) from Sales.SalesOrderdetail By now it wont be a great display to show you the Profiler trace reads a *tiny* bit different. So moral of the story, Percentage relative to batch can give a rough ‘finger in the air’ measurement, but dont rely on it as fact.

    Read the article

  • Error Handling Examples(C#)

    “The purpose of reviewing the Error Handling code is to assure that the application fails safely under all possible error conditions, expected and unexpected. No sensitive information is presented to the user when an error occurs.” (OWASP, 2011) No Error Handling The absence of error handling is still a form of error handling. Based on the code in Figure 1, if an error occurred and was not handled within either the ReadXml or BuildRequest methods the error would bubble up to the Search method. Since this method does not handle any acceptations the error will then bubble up the stack trace. If this continues and the error is not handled within the application then the environment in which the application is running will notify the user running the application that an error occurred based on what type of application. Figure 1: No Error Handling public DataSet Search(string searchTerm, int resultCount) { DataSet dt = new DataSet(); dt.ReadXml(BuildRequest(searchTerm, resultCount)); return dt; } Generic Error Handling One simple way to add error handling is to catch all errors by default. If you examine the code in Figure 2, you will see a try-catch block. On April 6th 2010 Louis Lazaris clearly describes a Try Catch statement by defining both the Try and Catch aspects of the statement. “The try portion is where you would put any code that might throw an error. In other words, all significant code should go in the try section. The catch section will also hold code, but that section is not vital to the running of the application. So, if you removed the try-catch statement altogether, the section of code inside the try part would still be the same, but all the code inside the catch would be removed.” (Lazaris, 2010) He also states that all errors that occur in the try section cause it to stops the execution of the try section and redirects all execution to the catch section. The catch section receives an object containing information about the error that occurred so that they system can gracefully handle the error properly. When errors occur they commonly log them in some form. This form could be an email, database entry, web service call, log file, or just an error massage displayed to the user.  Depending on the error sometimes applications can recover, while others force an application to close. Figure 2: Generic Error Handling public DataSet Search(string searchTerm, int resultCount) { DataSet dt = new DataSet(); try { dt.ReadXml(BuildRequest(searchTerm, resultCount)); } catch (Exception ex) { // Handle all Exceptions } return dt; } Error Specific Error Handling Like the Generic Error Handling, Error Specific error handling allows for the catching of specific known errors that may occur. For example wrapping a try catch statement around a soap web service call would allow the application to handle any error that was generated by the soap web service. Now, if the systems wanted to send a message to the web service provider every time a soap error occurred but did not want to notify them if any other type of error occurred like a network time out issue. This would be varying tedious to accomplish using the General Error Handling methodology. This brings us to the use case for using the Error Specific error handling methodology.  The Error Specific Error handling methodology allows for the TryCatch statement to catch various types of errors depending on the type of error that occurred. In Figure 3, the code attempts to handle DataException differently compared to how it potentially handles all other errors. This allows for specific error handling for each type of known error, and still allows for error handling of any unknown error that my occur during the execution of the TryCatch statement. Figure 5: Error Specific Error Handling public DataSet Search(string searchTerm, int resultCount) { DataSet dt = new DataSet(); try { dt.ReadXml(BuildRequest(searchTerm, resultCount)); } catch (TimeoutException ex) { // Handle Timeout TimeoutException Only } catch (Exception) { // Handle all Exceptions } return dt; }

    Read the article

  • SQL SERVER – Data Pages in Buffer Pool – Data Stored in Memory Cache

    - by pinaldave
    This will drop all the clean buffers so we will be able to start again from there. Now, run the following script and check the execution plan of the query. Have you ever wondered what types of data are there in your cache? During SQL Server Trainings, I am usually asked if there is any way one can know how much data in a table is stored in the memory cache? The more detailed question I usually get is if there are multiple indexes on table (and used in a query), were the data of the single table stored multiple times in the memory cache or only for a single time? Here is a query you can run to figure out what kind of data is stored in the cache. USE AdventureWorks GO SELECT COUNT(*) AS cached_pages_count, name AS BaseTableName, IndexName, IndexTypeDesc FROM sys.dm_os_buffer_descriptors AS bd INNER JOIN ( SELECT s_obj.name, s_obj.index_id, s_obj.allocation_unit_id, s_obj.OBJECT_ID, i.name IndexName, i.type_desc IndexTypeDesc FROM ( SELECT OBJECT_NAME(OBJECT_ID) AS name, index_id ,allocation_unit_id, OBJECT_ID FROM sys.allocation_units AS au INNER JOIN sys.partitions AS p ON au.container_id = p.hobt_id AND (au.type = 1 OR au.type = 3) UNION ALL SELECT OBJECT_NAME(OBJECT_ID) AS name, index_id, allocation_unit_id, OBJECT_ID FROM sys.allocation_units AS au INNER JOIN sys.partitions AS p ON au.container_id = p.partition_id AND au.type = 2 ) AS s_obj LEFT JOIN sys.indexes i ON i.index_id = s_obj.index_id AND i.OBJECT_ID = s_obj.OBJECT_ID ) AS obj ON bd.allocation_unit_id = obj.allocation_unit_id WHERE database_id = DB_ID() GROUP BY name, index_id, IndexName, IndexTypeDesc ORDER BY cached_pages_count DESC; GO Now let us run the query above and observe the output of the same. We can see in the above query that there are four columns. Cached_Pages_Count lists the pages cached in the memory. BaseTableName lists the original base table from which data pages are cached. IndexName lists the name of the index from which pages are cached. IndexTypeDesc lists the type of index. Now, let us do one more experience here. Please note that you should not run this test on a production server as it can extremely reduce the performance of the database. DBCC DROPCLEANBUFFERS This will drop all the clean buffers and we will be able to start again from there. Now run following script and check the execution plan for the same. USE AdventureWorks GO SELECT UnitPrice, ModifiedDate FROM Sales.SalesOrderDetail WHERE SalesOrderDetailID BETWEEN 1 AND 100 GO The execution plans contain the usage of two different indexes. Now, let us run the script that checks the pages cached in SQL Server. It will give us the following output. It is clear from the Resultset that when more than one index is used, datapages related to both or all of the indexes are stored in Memory Cache separately. Let me know what you think of this article. I had a great pleasure while writing this article because I was able to write on this subject, which I like the most. In the next article, we will exactly see what data are cached and those that are not cached, using a few undocumented commands. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL DMV

    Read the article

  • "Host key verification failed" error when transfering files using SCP command

    - by rvsi
    When I am trying to transfer files using SCP command I'm getting this error (Removed my IP and RSA key): @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is ------------------------(RSA key) Please contact your system administrator. Add correct host key in /home/users/myaccount/.ssh/known_hosts to get rid of this message. Offending key in /home/users/myaccount/.ssh/known_hosts:4 RSA host key for 'my IP' has changed and you have requested strict checking. Host key verification failed. lost connection I am using newly installed Ubuntu 12.04 and I can connect to this server using ssh. Any help?

    Read the article

  • Add a Sleep Timer to Windows 7 Media Center

    - by DigitalGeekery
    Do you make it a habit of falling asleep at night while watching Windows Media Center? Today we are going to take a look at the MC7 Sleep Timer for Windows 7 Media Center. This simple little plugin allows you to schedule an automatic shutdown time in Media Center. Note: At this point MC7 Sleep Timer doesn’t work with extenders. If you’re using ClamAV or Panda it may detect this plugin as a virus, we’ve tested it and this is a false positive for these two antivirus apps. Installation and Usage Download and install MC7 Sleep Timer. (See download below) After the installation is finished, you will find MC7 Sleep Timer located in the Media Center Extras Library. Click on the tile to open the timer and configure your settings. The MC7 Sleep Timer will open in full screen mode. You can choose to shutdown the PC after 30 or 60 minutes, create a custom length shutdown timer at any 5 minute interval, or select the exact time you want the PC to shutdown.  After setting your PC to shutdown, you’ll get an audio confirmation. To set a custom timer length, scroll to the “Custom timer” option and click right or left on your Media Center remote or, the right or left arrow keys, to choose how many minutes before shutdown. To schedule a shutdown for a certain time, browse to the “Shutdown at time” button, and scroll right or left with the arrow keys on the keyboard or remote. When you’ve chosen your time, hit “Enter” on the keyboard or “OK” on the remote.   Clicking the “Monitor Off” button will turn off only the monitor and “Cancel Timer” will cancel your shutdown request. Conclusion If you often find yourself falling asleep every night watching Media Center and then fumbling and stumbling in the middle of the night to shutdown your computer, MC7 Sleep timer might just be a perfect addition to your Media Center setup. Download MC7 Sleep Timer Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Re-Enable Sleep Mode in Windows VistaSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

    Read the article

  • Maximize Your Quadcopter’s Range with a Wi-Fi Repeater

    - by Jason Fitzpatrick
    The majority of commercial quadcopters use Wi-Fi for remote control and suffer from a fairly limited range. This simple hack uses an Wi-Fi router as an extender to radically expand the range of your copter. There’s no heavy modification or code tweaking required, all you need is a power source for the router and the ability to set it up as a repeater. The extra signal boost provided by the repeater extends the range from an average of 50 meters to over 250 meters. Check out the video above to see it in action. If you’re looking for a more dependable but more labor intensive way to extend the range of your copter, you can also retrofit it with a traditional radio-controlled remote. [via Hack A Day] HTG Explains: Is UPnP a Security Risk? How to Monitor and Control Your Children’s Computer Usage on Windows 8 What Happened to Solitaire and Minesweeper in Windows 8?

    Read the article

  • Connection Pooling is Busted

    - by MightyZot
    A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

    Read the article

  • On VirtualBox Guest OS “Could not initialize GLX"

    - by trivelt
    I have a remote build-machine with Jenkins and I'm trying to run GUI application. In Jenkins I installed Xvnc plugin, which uses TightVNC Server, but each build has failed. Earlier, there was a problem with loading driver swrast (by libGL), currently in the log there is this line: [Error] Could not initialize GLX Remote desktop is Ubuntu 14.04 running over VirtualBox, so I installed VBoxAddons but it didn't resolve the problem. Below I'm putting some logs, maybe helpful for you. $ cat /var/log/Xorg.0.log | grep GL [ 20.545] (==) AIGLX enabled [ 20.545] Loading extension GLX [ 20.913] (EE) AIGLX error: vboxvideo does not export required DRI extension [ 20.914] (EE) AIGLX: reverting to software rendering [ 21.615] (II) AIGLX: Loaded and initialized swrast [ 21.615] (II) GLX: Initialized DRISWRAST GL provider for screen 0 $ lsmod | grep box vboxsf 43786 0 vboxpci 23194 0 vboxnetadp 25670 0 vboxnetflt 27613 0 vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci vboxvideo 12658 0 vboxguest 248441 3 vboxsf drm 302817 1 vboxvideo $ lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any ideas what should I do?

    Read the article

  • Lync Server 2010

    - by ManojDhobale
    Microsoft Lync Server 2010 communications software and its client software, such as Microsoft Lync 2010, enable your users to connect in new ways and to stay connected, regardless of their physical location. Lync 2010 and Lync Server 2010 bring together the different ways that people communicate in a single client interface, are deployed as a unified platform, and are administered through a single management infrastructure. Workload Description IM and presence Instant messaging (IM) and presence help your users find and communicate with one another efficiently and effectively. IM provides an instant messaging platform with conversation history, and supports public IM connectivity with users of public IM networks such as MSN/Windows Live, Yahoo!, and AOL. Presence establishes and displays a user’s personal availability and willingness to communicate through the use of common states such as Available or Busy. This rich presence information enables other users to immediately make effective communication choices. Conferencing Lync Server includes support for IM conferencing, audio conferencing, web conferencing, video conferencing, and application sharing, for both scheduled and impromptu meetings. All these meeting types are supported with a single client. Lync Server also supports dial-in conferencing so that users of public switched telephone network (PSTN) phones can participate in the audio portion of conferences. Conferences can seamlessly change and grow in real time. For example, a single conference can start as just instant messages between a few users, and escalate to an audio conference with desktop sharing and a larger audience instantly, easily, and without interrupting the conversation flow. Enterprise Voice Enterprise Voice is the Voice over Internet Protocol (VoIP) offering in Lync Server 2010. It delivers a voice option to enhance or replace traditional private branch exchange (PBX) systems. In addition to the complete telephony capabilities of an IP PBX, Enterprise Voice is integrated with rich presence, IM, collaboration, and meetings. Features such as call answer, hold, resume, transfer, forward and divert are supported directly, while personalized speed dialing keys are replaced by Contacts lists, and automatic intercom is replaced with IM. Enterprise Voice supports high availability through call admission control (CAC), branch office survivability, and extended options for data resiliency. Support for remote users You can provide full Lync Server functionality for users who are currently outside your organization’s firewalls by deploying servers called Edge Servers to provide a connection for these remote users. These remote users can connect to conferences by using a personal computer with Lync 2010 installed, the phone, or a web interface. Deploying Edge Servers also enables you to federate with partner or vendor organizations. A federated relationship enables your users to put federated users on their Contacts lists, exchange presence information and instant messages with these users, and invite them to audio calls, video calls, and conferences. Integration with other products Lync Server integrates with several other products to provide additional benefits to your users and administrators. Meeting tools are integrated into Outlook 2010 to enable organizers to schedule a meeting or start an impromptu conference with a single click and make it just as easy for attendees to join. Presence information is integrated into Outlook 2010 and SharePoint 2010. Exchange Unified Messaging (UM) provides several integration features. Users can see if they have new voice mail within Lync 2010. They can click a play button in the Outlook message to hear the audio voice mail, or view a transcription of the voice mail in the notification message. Simple deployment To help you plan and deploy your servers and clients, Lync Server provides the Microsoft Lync Server 2010, Planning Tool and the Topology Builder. Lync Server 2010, Planning Tool is a wizard that interactively asks you a series of questions about your organization, the Lync Server features you want to enable, and your capacity planning needs. Then, it creates a recommended deployment topology based on your answers, and produces several forms of output to aid your planning and installation. Topology Builder is an installation component of Lync Server 2010. You use Topology Builder to create, adjust and publish your planned topology. It also validates your topology before you begin server installations. When you install Lync Server on individual servers, the installation program deploys the server as directed in the topology. Simple management After you deploy Lync Server, it offers the following powerful and streamlined management tools: Active Directory for its user information, which eliminates the need for separate user and policy databases. Microsoft Lync Server 2010 Control Panel, a new web-based graphical user interface for administrators. With this web-based UI, Lync Server administrators can manage their systems from anywhere on the corporate network, without needing specialized management software installed on their computers. Lync Server Management Shell command-line management tool, which is based on the Windows PowerShell command-line interface. It provides a rich command set for administration of all aspects of the product, and enables Lync Server administrators to automate repetitive tasks using a familiar tool. While the IM and presence features are automatically installed in every Lync Server deployment, you can choose whether to deploy conferencing, Enterprise Voice, and remote user access, to tailor your deployment to your organization’s needs.

    Read the article

  • Speed up SQL Server queries with PREFETCH

    - by Akshay Deep Lamba
    Problem The SAN data volume has a throughput capacity of 400MB/sec; however my query is still running slow and it is waiting on I/O (PAGEIOLATCH_SH). Windows Performance Monitor shows data volume speed of 4MB/sec. Where is the problem and how can I find the problem? Solution This is another summary of a great article published by R. Meyyappan at www.sqlworkshops.com.  In my opinion, this is the first article that highlights and explains with working examples how PREFETCH determines the performance of a Nested Loop join.  First of all, I just want to recall that Prefetch is a mechanism with which SQL Server can fire up many I/O requests in parallel for a Nested Loop join. When SQL Server executes a Nested Loop join, it may or may not enable Prefetch accordingly to the number of rows in the outer table. If the number of rows in the outer table is greater than 25 then SQL will enable and use Prefetch to speed up query performance, but it will not if it is less than 25 rows. In this section we are going to see different scenarios where prefetch is automatically enabled or disabled. These examples only use two tables RegionalOrder and Orders.  If you want to create the sample tables and sample data, please visit this site www.sqlworkshops.com. The breakdown of the data in the RegionalOrders table is shown below and the Orders table contains about 6 million rows. In this first example, I am creating a stored procedure against two tables and then execute the stored procedure.  Before running the stored proceudre, I am going to include the actual execution plan. --Example provided by www.sqlworkshops.com --Create procedure that pulls orders based on City --Do not forget to include the actual execution plan CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails       FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID)       WHERE City = @City END GO SET STATISTICS time ON GO --Example provided by www.sqlworkshops.com --Execute the procedure with parameter SmallCity1 EXEC RegionalOrdersProc 'SmallCity1' GO After running the stored procedure, if we right click on the Clustered Index Scan and click Properties we can see the Estimated Numbers of Rows is 24.    If we right click on Nested Loops and click Properties we do not see Prefetch, because it is disabled. This behavior was expected, because the number of rows containing the value ‘SmallCity1’ in the outer table is less than 25.   Now, if I run the same procedure with parameter ‘BigCity’ will Prefetch be enabled? --Example provided by www.sqlworkshops.com --Execute the procedure with parameter BigCity --We are using cached plan EXEC RegionalOrdersProc 'BigCity' GO As we can see from the below screenshot, prefetch is not enabled and the query takes around 7 seconds to execute. This is because the query used the cached plan from ‘SmallCity1’ that had prefetch disabled. Please note that even if we have 999 rows for ‘BigCity’ the Estimated Numbers of Rows is still 24.   Finally, let’s clear the procedure cache to trigger a new optimization and execute the procedure again. DBCC freeproccache GO EXEC RegionalOrdersProc 'BigCity' GO This time, our procedure runs under a second, Prefetch is enabled and the Estimated Number of Rows is 999.   The RegionalOrdersProc can be optimized by using the below example where we are using an optimizer hint. I have also shown some other hints that could be used as well. --Example provided by www.sqlworkshops.com --You can fix the issue by using any of the following --hints --Create procedure that pulls orders based on City DROP PROC RegionalOrdersProc GO CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails       FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID)       WHERE City = @City       --Hinting optimizer to use SmallCity2 for estimation       OPTION (optimize FOR (@City = 'SmallCity2'))       --Hinting optimizer to estimate for the currnet parameters       --option (recompile)       --Hinting optimize not to use histogram rather       --density for estimation (average of all 3 cities)       --option (optimize for (@City UNKNOWN))       --option (optimize for UNKNOWN) END GO Conclusion, this tip was mainly aimed at illustrating how Prefetch can speed up query execution and how the different number of rows can trigger this.

    Read the article

  • MvcExtensions - PerRequestTask

    - by kazimanzurrashid
    In the previous post, we have seen the BootstrapperTask which executes when the application starts and ends, similarly there are times when we need to execute some custom logic when a request starts and ends. Usually, for this kind of scenario we create HttpModule and hook the begin and end request events. There is nothing wrong with this approach, except HttpModules are not at all IoC containers friendly, also defining the HttpModule execution order is bit cumbersome, you either have to modify the machine.config or clear the HttpModules and add it again in web.config. Instead, you can use the PerRequestTask which is very much container friendly as well as supports execution orders. Lets few examples where it can be used. Remove www Subdomain Lets say we want to remove the www subdomain, so that if anybody types http://www.mydomain.com it will automatically redirects to http://mydomain.com. public class RemoveWwwSubdomain : PerRequestTask { public RemoveWww() { Order = DefaultOrder - 1; } protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { const string Prefix = "http://www."; Check.Argument.IsNotNull(executionContext, "executionContext"); HttpContextBase httpContext = executionContext.HttpContext; string url = httpContext.Request.Url.ToString(); bool startsWith3W = url.StartsWith(Prefix, StringComparison.OrdinalIgnoreCase); bool shouldContinue = true; if (startsWith3W) { string newUrl = "http://" + url.Substring(Prefix.Length); HttpResponseBase response = httpContext.Response; response.StatusCode = (int)HttpStatusCode.MovedPermanently; response.Status = "301 Moved Permanently"; response.RedirectLocation = newUrl; response.SuppressContent = true; shouldContinue = false; } return shouldContinue ? TaskContinuation.Continue : TaskContinuation.Break; } } As you can see, first, we are setting the order so that we do not have to execute the remaining tasks of the chain when we are redirecting, next in the ExecuteCore, we checking the whether www is present, if present we are sending a permanently moved http status code and breaking the task execution chain otherwise we are continuing with the chain. Blocking IP Address Lets take another scenario, your application is hosted in a shared hosting environment where you do not have the permission to change the IIS setting and you want to block certain IP addresses from visiting your application. Lets say, you maintain a list of IP address in database/xml files which you want to block, you have a IBannedIPAddressRepository service which is used to match banned IP Address. public class BlockRestrictedIPAddress : PerRequestTask { protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { bool shouldContinue = true; HttpContextBase httpContext = executionContext.HttpContext; if (!httpContext.Request.IsLocal) { string ipAddress = httpContext.Request.UserHostAddress; HttpResponseBase httpResponse = httpContext.Response; if (executionContext.ServiceLocator.GetInstance<IBannedIPAddressRepository>().IsMatching(ipAddress)) { httpResponse.StatusCode = (int)HttpStatusCode.Forbidden; httpResponse.StatusDescription = "IPAddress blocked."; shouldContinue = false; } } return shouldContinue ? TaskContinuation.Continue : TaskContinuation.Break; } } Managing Database Session Now, let see how it can be used to manage NHibernate session, assuming that ISessionFactory of NHibernate is already registered in our container. public class ManageNHibernateSession : PerRequestTask { private ISession session; protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { ISessionFactory factory = executionContext.ServiceLocator.GetInstance<ISessionFactory>(); session = factory.OpenSession(); return TaskContinuation.Continue; } protected override void DisposeCore() { session.Close(); session.Dispose(); } } As you can see PerRequestTask can be used to execute small and precise tasks in the begin/end request, certainly if you want to execute other than begin/end request there is no other alternate of HttpModule. That’s it for today, in the next post, we will discuss about the Action Filters, so stay tuned.

    Read the article

  • Code is not the best way to draw

    - by Bertrand Le Roy
    It should be quite obvious: drawing requires constant visual feedback. Why is it then that we still draw with code in so many situations? Of course it’s because the low-level APIs always come first, and design tools are built after and on top of those. Existing design tools also don’t typically include complex UI elements such as buttons. When we launched our Touch Display module for Netduino Go!, we naturally built APIs that made it easy to draw on the screen from code, but very soon, we felt the limitations and tedium of drawing in code. In particular, any modification requires a modification of the code, followed by compilation and deployment. When trying to set-up buttons at pixel precision, the process is not optimal. On the other hand, code is irreplaceable as a way to automate repetitive tasks. While tools like Illustrator have ways to repeat graphical elements, they do so in a way that is a little alien and counter-intuitive to my developer mind. From these reflections, I knew that I wanted a design tool that would be structurally code-centric but that would still enable immediate feedback and mouse adjustments. While thinking about the best way to achieve this goal, I saw this fantastic video by Bret Victor: The key to the magic in all these demos is permanent execution of the code being edited. Whenever a parameter is being modified, everything is re-executed immediately so that the impact of the modification is instantaneously visible. If you do this all the time, the code and the result of its execution fuse in the mind of the user into dual representations of a single object. All mental barriers disappear. It’s like magic. The tool I built, Nutshell, is just another implementation of this principle. It manipulates a list of graphical operations on the screen. Each operation has a nice editor, and translates into a bit of code. Any modification to the parameters of the operation will modify the bit of generated code and trigger a re-execution of the whole program. This happens so fast that it feels like the drawing reacts instantaneously to all changes. The order of the operations is also the order in which the code gets executed. So if you want to bring objects to the front, move them down in the list, and up if you want to move them to the back: But where it gets really fun is when you start applying code constructs such as loops to the design tool. The elements that you put inside of a loop can use the loop counter in expressions, enabling crazy scenarios while retaining the real-time edition features. When you’re done building, you can just deploy the code to the device and see it run in its native environment: This works thanks to two code generators. The first code generator is building JavaScript that is executed in the browser to build the canvas view in the web page hosting the tool. The second code generator is building the C# code that will run on the Netduino Go! microcontroller and that will drive the display module. The possibilities are fascinating, even if you don’t care about driving small touch screens from microcontrollers: it is now possible, within a reasonable budget, to build specialized design tools for very vertical applications. Direct feedback is a powerful ally in many domains. Code generation driven by visual designers has become more approachable than ever thanks to extraordinary JavaScript libraries and to the powerful development platform that modern browsers provide. I encourage you to tinker with Nutshell and let it open your eyes to new possibilities that you may not have considered before. It’s open source. And of course, my company, Nwazet, can help you develop your own custom browser-based direct feedback design tools. This is real visual programming…

    Read the article

  • SQL SERVER – OLEDB – Link Server – Wait Type – Day 23 of 28

    - by pinaldave
    When I decided to start writing about this wait type, the very first question that came to my mind was, “What does ‘OLEDB’ stand for?” A quick search on Wikipedia tells me that OLEDB means Object Linking and Embedding Database. (How many of you knew this?) Anyway, I found it very interesting that this wait type was in one of the top 10 wait types in many of the systems I have come across in my performance tuning experience. Books On-Line: ????OLEDB occurs when SQL Server calls the SQL Server Native Client OLE DB Provider. This wait type is not used for synchronization. Instead, it indicates the duration of calls to the OLE DB provider. OLEDB Explanation: This wait type primarily happens when Link Server or Remove Query has been executed. The most common case wherein this wait type is visible is during the execution of Linked Server. When SQL Server is retrieving data from the remote server, it uses OLEDB API to retrieve the data. It is possible that the remote system is not quick enough or the connection between them is not fast enough, leading SQL Server to wait for the result’s return from the remote (or external) server. This is the time OLEDB wait type occurs. Reducing OLEDB wait: Check the Link Server configuration. Checking Disk-Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) At this point in time, I am not able to think of any more ways on reducing this wait type. Do you have any opinion about this subject? Please share it here and I will share your comment with the rest of the Community, and of course, with due credit unto you. Please read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • logout when running firefox over ssh

    - by Jacques MALAPRADE
    this is very strange and has never happened before. When I ssh to a remote computer at my uni and try and run firefox (even with -no-remote etc.) it automatically logs me out of my local computer. When I log in again it automatically runs teamviewer ( suspicious!!! ). It also came up with a "network service discovery disabled" error similar to this post when logging back in: network service discovery disabled. I am running ubuntu 12.04 on a hp pavillion laptop. I would appreciate if someone can tell me what I am doing wrong....

    Read the article

  • Unable to cast transparent proxy to type &lt;type&gt;

    - by Rick Strahl
    This is not the first time I've run into this wonderful error while creating new AppDomains in .NET and then trying to load types and access them across App Domains. In almost all cases the problem I've run into with this error the problem comes from the two AppDomains involved loading different copies of the same type. Unless the types match exactly and come exactly from the same assembly the typecast will fail. The most common scenario is that the types are loaded from different assemblies - as unlikely as that sounds. An Example of Failure To give some context, I'm working on some old code in Html Help Builder that creates a new AppDomain in order to parse assembly information for documentation purposes. I create a new AppDomain in order to load up an assembly process it and then immediately unload it along with the AppDomain. The AppDomain allows for unloading that otherwise wouldn't be possible as well as isolating my code from the assembly that's being loaded. The process to accomplish this is fairly established and I use it for lots of applications that use add-in like functionality - basically anywhere where code needs to be isolated and have the ability to be unloaded. My pattern for this is: Create a new AppDomain Load a Factory Class into the AppDomain Use the Factory Class to load additional types from the remote domain Here's the relevant code from my TypeParserFactory that creates a domain and then loads a specific type - TypeParser - that is accessed cross-AppDomain in the parent domain:public class TypeParserFactory : System.MarshalByRefObject,IDisposable { …/// <summary> /// TypeParser Factory method that loads the TypeParser /// object into a new AppDomain so it can be unloaded. /// Creates AppDomain and creates type. /// </summary> /// <returns></returns> public TypeParser CreateTypeParser() { if (!CreateAppDomain(null)) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! TypeParser parser = null; try { Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); } catch (Exception ex) { this.ErrorMessage = ex.GetBaseException().Message; return null; } return parser; } private bool CreateAppDomain(string lcAppDomain) { if (lcAppDomain == null) lcAppDomain = "wwReflection" + Guid.NewGuid().ToString().GetHashCode().ToString("x"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; //setup.PrivateBinPath = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "bin"); this.LocalAppDomain = AppDomain.CreateDomain(lcAppDomain,null,setup); // Need a custom resolver so we can load assembly from non current path AppDomain.CurrentDomain.AssemblyResolve += new ResolveEventHandler(CurrentDomain_AssemblyResolve); return true; } …} Note that the classes must be either [Serializable] (by value) or inherit from MarshalByRefObject in order to be accessible remotely. Here I need to call methods on the remote object so all classes are MarshalByRefObject. The specific problem code is the loading up a new type which points at an assembly that visible both in the current domain and the remote domain and then instantiates a type from it. This is the code in question:Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); The last line of code is what blows up with the Unable to cast transparent proxy to type <type> error. Without the cast the code actually returns a TransparentProxy instance, but the cast is what blows up. In other words I AM in fact getting a TypeParser instance back but it can't be cast to the TypeParser type that is loaded in the current AppDomain. Finding the Problem To see what's going on I tried using the .NET 4.0 dynamic type on the result and lo and behold it worked with dynamic - the value returned is actually a TypeParser instance: Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; object objparser = this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); // dynamic works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // casting fails parser = (TypeParser)objparser; So clearly a TypeParser type is coming back, but nevertheless it's not the right one. Hmmm… mysterious.Another couple of tries reveal the problem however:// works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // c:\wwapps\wwhelp\wwReflection20.dll (Current Execution Folder) string info3 = typeof(TypeParser).Assembly.CodeBase; // c:\program files\vfp9\wwReflection20.dll (my COM client EXE's folder) string info4 = dynParser.GetType().Assembly.CodeBase; // fails parser = (TypeParser)objparser; As you can see the second value is coming from a totally different assembly. Note that this is even though I EXPLICITLY SPECIFIED an assembly path to load the assembly from! Instead .NET decided to load the assembly from the original ApplicationBase folder. Ouch! How I actually tracked this down was a little more tedious: I added a method like this to both the factory and the instance types and then compared notes:public string GetVersionInfo() { return ".NET Version: " + Environment.Version.ToString() + "\r\n" + "wwReflection Assembly: " + typeof(TypeParserFactory).Assembly.CodeBase.Replace("file:///", "").Replace("/", "\\") + "\r\n" + "Assembly Cur Dir: " + Directory.GetCurrentDirectory() + "\r\n" + "ApplicationBase: " + AppDomain.CurrentDomain.SetupInformation.ApplicationBase + "\r\n" + "App Domain: " + AppDomain.CurrentDomain.FriendlyName + "\r\n"; } For the factory I got: .NET Version: 4.0.30319.239wwReflection Assembly: c:\wwapps\wwhelp\bin\wwreflection20.dllAssembly Cur Dir: c:\wwapps\wwhelpApplicationBase: C:\Programs\vfp9\App Domain: wwReflection534cfa1f For the instance type I got: .NET Version: 4.0.30319.239wwReflection Assembly: C:\\Programs\\vfp9\wwreflection20.dllAssembly Cur Dir: c:\\wwapps\\wwhelpApplicationBase: C:\\Programs\\vfp9\App Domain: wwDotNetBridge_56006605 which clearly shows the problem. You can see that both are loading from different appDomains but the each is loading the assembly from a different location. Probably a better solution yet (for ANY kind of assembly loading problem) is to use the .NET Fusion Log Viewer to trace assembly loads.The Fusion viewer will show a load trace for each assembly loaded and where it's looking to find it. Here's what the viewer looks like: The last trace above that I found for the second wwReflection20 load (the one that is wonky) looks like this:*** Assembly Binder Log Entry (1/13/2012 @ 3:06:49 AM) *** The operation was successful. Bind result: hr = 0x0. The operation completed successfully. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework\V4.0.30319\clr.dll Running under executable c:\programs\vfp9\vfp9.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = Ras\ricks LOG: DisplayName = wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null (Fully-specified) LOG: Appbase = file:///C:/Programs/vfp9/ LOG: Initial PrivatePath = NULL LOG: Dynamic Base = NULL LOG: Cache Base = NULL LOG: AppName = vfp9.exe Calling assembly : (Unknown). === LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Programs\vfp9\vfp9.exe.Config LOG: Using host configuration file: LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\V4.0.30319\config\machine.config. LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind). LOG: Attempting download of new URL file:///C:/Programs/vfp9/wwReflection20.DLL. LOG: Assembly download was successful. Attempting setup of file: C:\Programs\vfp9\wwReflection20.dll LOG: Entering run-from-source setup phase. LOG: Assembly Name is: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null LOG: Binding succeeds. Returns assembly from C:\Programs\vfp9\wwReflection20.dll. LOG: Assembly is loaded in default load context. WRN: The same assembly was loaded into multiple contexts of an application domain: WRN: Context: Default | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: Context: LoadFrom | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: This might lead to runtime failures. WRN: It is recommended to inspect your application on whether this is intentional or not. WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue. Notice that the fusion log clearly shows that the .NET loader makes no attempt to even load the assembly from the path I explicitly specified. Remember your Assembly Locations As mentioned earlier all failures I've seen like this ultimately resulted from different versions of the same type being available in the two AppDomains. At first sight that seems ridiculous - how could the types be different and why would you have multiple assemblies - but there are actually a number of scenarios where it's quite possible to have multiple copies of the same assembly floating around in multiple places. If you're hosting different environments (like hosting the Razor Engine, or ASP.NET Runtime for example) it's common to create a private BIN folder and it's important to make sure that there's no overlap of assemblies. In my case of Html Help Builder the problem started because I'm using COM interop to access the .NET assembly and the above code. COM Interop has very specific requirements on where assemblies can be found and because I was mucking around with the loader code today, I ended up moving assemblies around to a new location for explicit loading. The explicit load works in the main AppDomain, but failed in the remote domain as I showed. The solution here was simple enough: Delete the extraneous assembly which was left around by accident. Not a common problem, but one that when it bites is pretty nasty to figure out because it seems so unlikely that types wouldn't match. I know I've run into this a few times and writing this down hopefully will make me remember in the future rather than poking around again for an hour trying to debug the issue as I did today. Hopefully it'll save some of you some time as well in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  COM   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Whether to use UNION or OR in SQL Server Queries

    - by Dinesh Asanka
    Recently I came across with an article on DB2 about using Union instead of OR. So I thought of carrying out a research on SQL Server on what scenarios UNION is optimal in and which scenarios OR would be best. I will analyze this with a few scenarios using samples taken  from the AdventureWorks database Sales.SalesOrderDetail table. Scenario 1: Selecting all columns So we are going to select all columns and you have a non-clustered index on the ProductID column. --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR ProductID =709 OR ProductID =998 OR ProductID =875 OR ProductID =976 OR ProductID =874 --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 709 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 998 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 875 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 976 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 874 So query 1 is using OR and the later is using UNION. Let us analyze the execution plans for these queries. Query 1 Query 2 As expected Query 1 will use Clustered Index Scan but Query 2, uses all sorts of things. In this case, since it is using multiple CPUs you might have CX_PACKET waits as well. Let’s look at the profiler results for these two queries: CPU Reads Duration Row Counts OR 78 1252 389 3854 UNION 250 7495 660 3854 You can see from the above table the UNION query is not performing well as the  OR query though both are retuning same no of rows (3854).These results indicate that, for the above scenario UNION should be used. Scenario 2: Non-Clustered and Clustered Index Columns only --Query 1 : OR SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR ProductID =709 OR ProductID =998 OR ProductID =875 OR ProductID =976 OR ProductID =874 GO --Query 2 : UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 709 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 998 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 875 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 976 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 874 GO So this time, we will be selecting only index columns, which means these queries will avoid a data page lookup. As in the previous case we will analyze the execution plans: Query 1 Query 2 Again, Query 2 is more complex than Query 1. Let us look at the profile analysis: CPU Reads Duration Row Counts OR 0 24 208 3854 UNION 0 38 193 3854 In this analyzis, there is only slight difference between OR and UNION. Scenario 3: Selecting all columns for different fields Up to now, we were using only one column (ProductID) in the where clause.  What if we have two columns for where clauses and let us assume both are covered by non-clustered indexes? --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR CarrierTrackingNumber LIKE 'D0B8%' --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE CarrierTrackingNumber  LIKE 'D0B8%' Query 1 Query 2: As we can see, the query plan for the second query has improved. Let us see the profiler results. CPU Reads Duration Row Counts OR 47 1278 443 1228 UNION 31 1334 400 1228 So in this case too, there is little difference between OR and UNION. Scenario 4: Selecting Clustered index columns for different fields Now let us go only with clustered indexes: --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR CarrierTrackingNumber LIKE 'D0B8%' --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE CarrierTrackingNumber  LIKE 'D0B8%' Query 1 Query 2 Now both execution plans are almost identical except is an additional Stream Aggregate is used in the first query. This means UNION has advantage over OR in this scenario. Let us see profiler results for these queries again. CPU Reads Duration Row Counts OR 0 319 366 1228 UNION 0 50 193 1228 Now see the differences, in this scenario UNION has somewhat of an advantage over OR. Conclusion Using UNION or OR depends on the scenario you are faced with. So you need to do your analyzing before selecting the appropriate method. Also, above the four scenarios are not all an exhaustive list of scenarios, I selected those for the broad description purposes only.

    Read the article

  • how do i run teamviewer in a headless system?

    - by Serge
    im really new to ubuntu 12.04 and ive been trying to get remote desktop services between me and my server. and i dont have any spare monitors, keyboards, or mice. i did connect said items too the server and got teamviewer running and connected. but i cant use those components every time i want to go remote desktop. i have ssh but i want a GUI on hand for annoying stressful situations. i read somewhere that ubuntu doesnt start a gui if there is no monitor connected. and tried those xorg.conf setups to no avail. i believe this is the reason why my headlesds setup isnt working. how can i get my GUI to startup while headless?

    Read the article

  • How to change/create password keyring

    - by sadmicrowave
    when I try to remote desktop to the server from another ubuntu machine using the remote desktop viewer, it asks me to enter the password, which I do, then the viewer pane just goes black. When I come back and look at my server it is saying that the password keyring no longer matches the password used to login to the machine please reenter the password...and when I type in the password it doesnt take it, it just keeps popping back up saying the same message over and over. I found a thread explaining to go to System--Preferences--Passwords & Encryptions and right click on the keyring and click Set as Default. I did that and the problem persists...I tried changing the password but it told me that my original password was incorrect (even though it is the password I use to login and provide root authentication when asked) so I deleted the keyring in hopes of adding a new one but there is no place in gui to add a new one...so can I add a new one through command line? if so - how?

    Read the article

  • Logging connection strings

    If you some of the dynamic features of SSIS such as package configurations or property expressions then sometimes trying to work out were your connections are pointing can be a bit confusing. You will work out in the end but it can be useful to explicitly log this information so that when things go wrong you can just review the logs. You may wish to develop this idea further and encapsulate such logging into a custom task, but for now lets keep it simple and use the Script Task. The Script Task code below will raise an Information event showing the name and connection string for a connection. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Get the connection string, we need to know the name of the connection Dim connectionName As String = "My OLE-DB Connection" Dim connectionString As String = Dts.Connections(connectionName).ConnectionString ' Format the message and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connectionName, connectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Dts.TaskResult = Dts.Results.Success End Sub End Class Building on that example it is probably more flexible to log all connections in a package as shown in the next example. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Loop through all connections in the package For Each connection As ConnectionManager In Dts.Connections ' Get the connection string and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connection.Name, connection.ConnectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Next Dts.TaskResult = Dts.Results.Success End Sub End Class By using the Information event it makes it readily available in the designer, for example the Visual Studio Output window (Ctrl+Alt+O) or the package designer Execution Results tab, and also allows you to readily control the logging by choosing which events to log in the normal way. Now before somebody starts commenting that this is a security risk, I would like to highlight good practice for building connection managers. Firstly the Password property, or any other similar sensitive property is always defined as write-only, and secondly the connection string property only uses the public properties to assemble the connection string value when requested. In other words the connection string will never contain the password. I have seen a couple of cases where this is not true, but that was just bad development by third-parties, you won’t find anything like that in the box from Microsoft.   Whilst writing this code it made me wish that there was a custom log entry that you could just turn on that did this for you, but alas connection managers do not even seem to support custom events. It did however remind me of a very useful event that is often overlooked and fits rather well alongside connection string logging, the Execute SQL Task’s custom ExecuteSQLExecutingQuery event. To quote the help reference Custom Messages for Logging - Provides information about the execution phases of the SQL statement. Log entries are written when the task acquires connection to the database, when the task starts to prepare the SQL statement, and after the execution of the SQL statement is completed. The log entry for the prepare phase includes the SQL statement that the task uses. It is the last part that is so useful, how often have you used an expression to derive a SQL statement and you want to log that to make sure the correct SQL is being returned? You need to turn it one, by default no custom log events are captured, but I’ll refer you to a walkthrough on setting up the logging for ExecuteSQLExecutingQuery by Jamie.

    Read the article

  • T-SQL in Chicago – the LobsterPot teams with DataEducation

    - by Rob Farley
    In May, I’ll be in the US. I have board meetings for PASS at the SQLRally event in Dallas, and then I’m going to be spending a bit of time in Chicago. The big news is that while I’m in Chicago (May 14-16), I’m going to teach my “Advanced T-SQL Querying and Reporting: Building Effectiveness” course. This is a course that I’ve been teaching since the 2005 days, and have modified over time for 2008 and 2012. It’s very much my most popular course, and I love teaching it. Let me tell you why. For years, I wrote queries and thought I was good at it. I was a developer. I’d written a lot of C (and other, more fun languages like Prolog and Lisp) at university, and then got into the ‘real world’ and coded in VB, PL/SQL, and so on through to C#, and saw SQL (whichever database system it was) as just a way of getting the data back. I could write a query to return just about whatever data I wanted, and that was good. I was better at it than the people around me, and that helped. (It didn’t help my progression into management, then it just became a frustration, but for the most part, it was good to know that I was good at this particular thing.) But then I discovered the other side of querying – the execution plan. I started to learn about the translation from what I’d written into the plan, and this impacted my query-writing significantly. I look back at the queries I wrote before I understood this, and shudder. I wrote queries that were correct, but often a long way from effective. I’d done query tuning, but had largely done it without considering the plan, just inferring what indexes would help. This is not a performance-tuning course. It’s focused on the T-SQL that you read and write. But performance is a significant and recurring theme. Effective T-SQL has to be about performance – it’s the biggest way that a query becomes effective. There are other aspects too though – such as using constructs better. For example – I can write code that modifies data nicely, but if I haven’t learned about the MERGE statement and the way that it can impact things, I’m missing a few tricks. If you’re going to do this course, a good place to be is the situation I was in a few years before I wrote this course. You’re probably comfortable with writing T-SQL queries. You know how to make a SELECT statement do what you need it to, but feel there has to be a better way. You can write JOINs easily, and understand how to use LEFT JOIN to make sure you don’t filter out rows from the first table, but you’re coding blind. The first module I cover is on Query Execution. Take a look at the Course Outline at Data Education’s website. The first part of the first module is on the components of a SELECT statement (where I make you think harder about GROUP BY than you probably have before), but then we jump straight into Execution Plans. Some stuff on indexes is in there too, as is simplification and SARGability. Some of this is stuff that you may have heard me present on at conferences, but here you have me for three days straight. I’m sure you can imagine that we revisit these topics throughout the rest of the course as well, and you’d be right. In the second and third modules we look at a bunch of other aspects, including some of the T-SQL constructs that lots of people don’t know, and various other things that can help your T-SQL be, well, more effective. I’ve had quite a lot of people do this course and be itching to get back to work even on the first day. That’s not a comment about the jokes I tell, but because people want to look at the queries they run. LobsterPot Solutions is thrilled to be partnering with Data Education to bring this training to Chicago. Visit their website to register for the course. @rob_farley

    Read the article

  • High Jinks, Hi Jacks, Exceptional DBA Awards and PASS

    - by Rodney
    The countdown to PASS has counted down.  The day after tomorrow I will board a plane, like many others, on my way for the 4th year in a row to SQL PASS Summit.  The anticipation has been excruciating but luckily I have this little thing called a day job as a DBA that has kept me busy and not thinking too much about the event. Well that is not exactly true since my beautiful wife works for PASS so we get to talk about SQL from the time we wake up until late in the evening. I would not have it any other way and I feel very fortunate to be a part of this great event and to have been chosen as the Exceptional DBA Award judge also for the 4th year in a row.  This year, I will have been again tasked with presenting the award to the winner, Mr. Jeff Moden and it will be a true honor to meet him in person as I have read many of his articles on SSC and have attended his session at PASS previously.  The speech is all ready but one item remains, which will be a surprise to all who attend the party on Tuesday night in Seattle (see links below).  Let's face it, Exceptional DBAs everywhere work very hard protecting our data stores, tuning queries, mentoring, saving money, installing clusters, etc and once in a while there is time to be exceptionally non-professional and have a bit of fun. Once incident that happened this year that falls under the High Jinks category was when my network admin asked if I could Telnet into a SQL instance and see if I could make the connection through the firewall that he had just configured. I was able to establish a connection on port 1433 and it occurred to me that it would be very interesting if I could actually run T-SQL queries via a Telnet session much like you might do with an SMTP server. With that thought, I proceeded to demonstrate this could be possible by convincing my senior DBA Shawn McGehee that I was able to do so. At first he did not believe me. It shook his world view.  It was inconceivable.  What I had done, behind the scenes, of course, was to copy and rename SQLCMD.exe to Telnet.exe and used it to connect and run a simple, "Select * from sys.databases" on the SQL instance. I think if it had been anyone other than Shawn I could have extended this ruse indefinitely but he caught on within 30 seconds. It was a fun thirty seconds though. On the High Jacks side of the house, which is really merged to be SQL HACKS, I finally, after several years of struggling with how to connect to an untrusted domain like in a DMZ with a windows account in SSMS, I stumbled upon a solution that does away with the requirement to use SQL Authentication.  While "Runas" is a great command to use to run an application with a higher privileged account, I had not previously been able to figure out how to connect to the remote domain with SSMS and "Runsas". It never connected and caused a login failure every time for the remote windows domain account. Then I ran across an option for "Runas",   "/netonly".  This option postpones the login until a connection is made and only then passes the remote login you supply when you first launch SSMS with the "Runas" command. So a typical shortcut would look like: "C:\Windows\System32\runas.exe /netonly /user:remotedomain.com\rodlandrum "C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe" You will want to make sure the passwords are synced between the two domains, your local domain and the remote domain, otherwise you may have account lockout issues, but I have found in weeks of testing this is a stable solution. Now it is time to get ready to head for Seattle. Please, if you see me (@SQLBeat) or my wife (@Karlakay22) please run up and high five me (wait..High Jinks.High Jacks.High Fives.Need to change the title) or give me a big bear hug if you are strong enough to lift me off the ground. And if you do actually do that, I will think you are awesome and will not embarrass you by crying out for help or complaining of a broken back or sciatic nerve damage. And now the links to others who have all of the details. First, for the MVP Deep Dives 2, of which, like John, I was lucky enough to be able to participate in this year. http://www.simple-talk.com/community/blogs/johnm/archive/2011/09/29/103577.aspx And the details of the SSC party where the Exceptional DBA of 2011, Jeff Moden, will be awarded. http://www.simple-talk.com/community/blogs/rebecca_amos/archive/2011/10/05/103661.aspx   Cheers! Rodney

    Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >