Search Results

Search found 6258 results on 251 pages for 'power coder'.

Page 166/251 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Windows 7 fresh install blank screen

  - by Neil Barnwell

  I've just installed Win7 Ultimate to my PC. During the install it reboots a couple of times, but 2nd or 3rd reboot I see the "Starting Windows..." message, but followed by a black screen. No mouse cursor, taskbar, anything. The monitor power light is blue (indicating it has a signal) and it was displaying the setup wizard with no problems whatsoever. Has anyone else witnessed this phenomenon? Many thanks in advance. UPDATE I booted in safe mode, and got a screen saying "Setup is preparing your computer for first use". That's brilliant, although a message box has popped up over that saying: Windows cannot complete instlalation in Safe Mode. To continue installing Windows, restart the computer. So I don't really have the opportunity to do any cleverness with drivers or anything. I guess I could try getting a different version of Win7 (I'm installing from an MSDN DVD).

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Dell monitors keep blank after initial start

  - by offler

  We have Dell T1650 PCs with 2 nVidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectedly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• Motherboard not recognizing memory anymore

  - by root

  I bought some new RAM and installed it on my motherboard. But, the BIOS would not post. There's an LED on my motherboard that shows error codes, and it showed the error: No usable memory detected. So, I removed the new memory and reinstalled the old memory, thus restoring the computer back to its original configuration. But, the BIOS still would not post, still giving the error: No usable memory detected. I've ensured that the memory and power headers are seated properly. I've tried all possible combinations of memory slots, and I've also reset the CMOS, but the error remains the same. The computer was working fine before I tried upgrading the memory, and I originally assembled the computer myself. What are some possible causes of this problem?

  Read the article

• Does Win7 VPC negate need to re-install?

  - by justSteve

  I fear i have an impending hardware breakdown coming ... the last time the box booted i had to power off and on a couple times before windows loaded. Seems fine when up and running. So i'm preparing to install new hardware and would like to bring over the currently installed image. From what i've read of VM capabilities of VM i shouldn't have to re-install? VM seems most applicable to data centers and enterprises. I'd like to see some coverage of the tricks for SOHO users.

  Read the article

• What is making iTunes stop playing when my computer idles?

  - by OwenP

  I've got a rare weekend with nothing to do, so I'm getting some housework done. I have iTunes playing for some background noise. Every 20 minutes or so, it just stops playing; if I move the mouse it starts again. I'm on Windows 7 64-bit. My power settings have my monitor turning off at 10 minutes and hard drives at 20. Both sleep and hibernate are disabled. "Aha!", you say, "Clearly when the hard drive is turned off iTunes is stopping!" Not so. I fiddled with the settings and changed them to make the hard drive sleep in 5 minutes, and iTunes kept playing for the 7 minutes I watched it. I'm currently trying to see what happens if I set the hard drive to never turn off, but I'd prefer to leave it at 20 minutes to save minor amounts of energy. What other settings could be the culprit?

  Read the article

• Is GPU active when there are not any monitors?

  - by Mixer

  Does GPU render anything when there is no monitor plugged in? Today I turned my old PC into some kind of a "server" which means that I want it running 24/7. I don't need any display (I will operate through ssh) so when everything was set up I removed my monitor. After a hour I checked my graphic card's cooling system and it was still hot. My graphic card is GeForce 8600 (with DVI connector), OS is Debian Linux. What is the best solution in this situation (standalone server) if GPU is active and I don't want it to waste power?

  Read the article

• Alternative to Rhythmbox that's light on CPU.

  - by D Connors

  I'm running Ubuntu Lucid on my netbook, and I like listening to music while doing other stuff. Problem is: Rhythmbox is constantly consuming 7-9% of my CPU while it's playing. Now, 9% might not seem like much, but it's more than double the sum of all other processes, and it's a battery killer. Now, I know that any music player will be active (not idle) while playing, and thus will consume more CPU power than idle processes. But I'd still like to know if there's a good music player for Ubuntu that's light on CPU.

  Read the article

• Are there any 17-20 inch monitors that support displayport?

  - by WildJoe

  I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

  Read the article

• No image from graphics card but image from onboard video

  - by ReAzem

  I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

  Read the article

• Putting two physical hard drives in a single 2.5" bay?

  - by dgw

  My crazy brain came up with this ridiculous idea. "Why can't I have a single 2.5" drive device that actually contains two independent hard drives? I want RAID 1 data mirroring and the security of having redundant drives. This is a thing that must exist!" To be clear, I am not asking if I can somehow shoehorn two 2.5" drives into a single bay, replace an optical drive with an additional HDD, or anything like that. What I have in mind is a single 2.5"-form-factor device that houses two independent hard drives, with separate housings (likely) and distinct controllers. Probably all they'd need to share is the power & SATA connections. Probably no such thing exists, but because I know there exist hard drives the physical size of a stack of postage stamps (roughly), I have to ask.

  Read the article

• Windows Reformatting

  - by Shimz187

  I recently began formatting a hard drive via USB extenal drive when the power went off. When i powered it up again and connected the drive the drives dont show up under my computer. When i go to disk management, i see the drive but now it says unallocated space. The drive was initialy partitioned into 2 drives. I cant see both drives now. Tried running GetDataBack NTFS recovery tool and it only comes up with errors. There seem to be no information on the drive from the data recovery utility. I know the information is there but how do i find it. HELP!!!!

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• What would Stack Exchange's yearly expenses be if it were to be using a third party host?

  - by abel

  StackExchange manages it's own servers, as it should, but if SE were to be hosted on a 3rd party "cloud" hosting (like Amazon's), what would it's monthly / yearly expenses be(keeping everything else the same)? A detailed answer comparing it to the bills that Stackexchange boots currently (including power/property/staff) would help. (PS: I know that the blog is a good resource. I also understand that managing your own hosting is almost the same as setting up a hosting company and using it for your own needs. Plus is this a question for meta or does it fit within serverfault's purview?)

  Read the article

• Exchange 2007 OWA not listening on SSL port

  - by krs1

  I have an Exchange 2007 server that went down after a power failure. It has OWA access via SSL both externally and internally. OWA is working fine from the internal notwork, however I am getting a timeout when I attempt to connect externally. I pulled up wireshark and noticed that the server actually redirects to SSL. For some reason the server is not listening on the SSL port, and this seems to be causing the timeout. I normally do only development work, but I'm stuck with this since my sysadmin took off for the week and isn't answering my phone calls. As far as I know it shouldn't be a firewall issue. Aside from me not wanting to work on the damn thing, what should I look for?

  Read the article

• When computer turns on: keyboard/mouse/monitor don't work?

  - by dave

  the computer is barely good,at least i think..features Intel core 2 4 GB ram Nvidia Radeon 9600 512 mb Gigabite motherboad (the others i can't remember).. Used this computer for 3 years with no problem...The problem started one day after while it froze everything, then I shut down with removing the electricity power. A few hours later, I tried to log in to the computer but nothing moved. Nor keyboard nor mouse nor monitor worked, I was thinking that should be a delay so I left it some time. After a minute it turned off without my help around 30 seconds then it turned on automatically, but was the same problem like before and it goes again and again...any suggestions? If more info/specs required, let me know.

  Read the article

• Outlook 2010 keeps asking me to Choose Profile

  - by Marshall

  This question has been asked and the answer given seemed to work for others who asked it, but it doesn't work for me. Here's what happened: the other day my power blinked twice within seconds and it caused my computer to reboot. Ever since then, I get a prompt from Outlook 2010 asking me to choose a profile, either when I load the program or when the program is not even running. The only option is "Outlook", and even when I check "set as default" it keeps asking me. I went to Windows (Vista) Control Panel, and searched for "mail" as someone suggested. The only search result that seemed relevant was "Change default programs that Windows uses". From there, I choose Custom/Choose a default email program/Outlook. There is nothing regarding "profiles" as the forum answer suggests, and it doesn't solve the problem. Also, I did all of this while Outlook was not running. Can someone help?

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• Sony Vaio laptop hangs up on boot

  - by Kole

  When I power on the laptop it displays the "Vaio" logo and the screen after show, but after that the screen is completely blank but the backlight is lit. Nothing progresses from here. When trying to press f8 to boot into safe mode, nothing happens, black screen again. I created a windows 7 32bit install disk (I had the same OS on it before) to repair or even format my pc. I boot from the disk and it loads all the files and gets to the "Windows is starting" screen but after that it always hangs up on a blank screen with a mouse cursor. Is there any fix to this whatsoever?

  Read the article

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• What is the easiest way to apply database functionality into my daily life?

  - by Daddy Warbox

  let me try to explain it by listing some of the things I want to do: Submit random thoughts, notes, facts, and to-do tasks of any sort and at any time. Tag each of these submissions freely. Manage these tags centrally. Associate meta-data with submissions and tags. Search, filter, and sort submissions. I want lots of power here. Display views of submissions (including within searches) in a hierarchy. Create said hierarchies easily out by ordering relevant tags. I'm thinking towards some kind of desktop program that allows me to quickly do all of these things. A web service could also work, too, but it will need offline capabilities. I don't want to have to pay for this, if that's possible. Also, as I know regex and SQL, I wouldn't mind solutions involving the use of either.

  Read the article

• Setting Boot and Mirror Disks correctly at the Solaris OBP

  - by Shaun Dewberry

  I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >