Search Results

Search found 5469 results on 219 pages for 'compare and swap'.

Page 167/219 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• External Storage for 2TB of backups and 4TB of data RAID level? HW vs Software?

  - by Jerry Mayers

  I have a Mac Mini set up as a media center/file server. Currently I just have a hodgepodge mess of external drives for storage. I'm maxed out, and I have some new laptops on the way with much larger drives and I need to work out a good storage solution for backing them up, as well as storing media on the server. I need around 2 TB of storage for the time machine backups from my various systems and around 2 TB more for media. I would like to build this to handle around 6 TB total so I have some growing room. Since I'm using a Mac Mini as the server I need to use external enclosure(s) that support USB 2 or Firewire 800 (preferred) or gigabit Ethernet. Performance of the system isn't a huge concern since the majority of the access from other computers is done over 802.11N. I plan on using 2TB drives, for the final version, but initially I'll try and use my existing 2 (1TB) drives + some new 2TB drives, and swap the 1TB ones out as I fill up. As to the actual questions: Should I use hardware RAID in some enclosure? Because if the enclosure dies I have to find an identical one to get to my data right? Wouldn't a software RAID be better as I can use any method of connecting the drives to the system? Remember OS X server is my OS. What if I had to reinstall OS X, can I restore the software RAID easily? What RAID version should I use? For the 2TB used for the time machine disk I don't see why I need RAID here, just a single 2TB drive since its already the backup, but for the remaining 4TB it would be the only copy of the data so I should build some redundancy. I had a RAID 5 setup using a cheep RAID PCI card years ago running RAID 5 in a 2 TB array and when a drive died it wanted 48 hours to rebuild. Is this crazy slow for a setup of this size or is this to be expected? Any suggestions as to drive enclosures?

  Read the article

• Glassfish v3 failure when startup. "Cannot allocate memory "

  - by Shisoft

  It is clear in this Question Fail to start Glassfish 3.1: java.io.IOException: error=12, Cannot allocate memory But in my case,I have a 512M memory Ubuntu 10.04 vps.It seems that I don't need to change any configure.But when start the server,I got this exception VM failed to start: java.io.IOException: Cannot run program "/usr/lib/jvm/java-6-sun-1.6.0.22/bin/java" (in directory "/home/glassfish/glassfish/domains/domain1/config"): java.io.IOException: error=12, Cannot allocate memory So,I set <jvm-options>-Xmx512</jvm-options> to <jvm-options>-Xmx400</jvm-options> The exception remains.What did I do something wrong? result of free -m total used free shared buffers cached Mem: 512 43 468 0 0 0 -/+ buffers/cache: 43 468 Swap: 0 0 0 result of cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 146049: kmemsize 2670652 5385253 51200000 51200000 0 lockedpages 0 8 2048 2048 0 privvmpages 11134 134522 131200 262200 4 shmpages 648 1352 128000 128000 0 dummy 0 0 0 0 0 numproc 12 73 500 500 0 physpages 6519 28162 0 200000000 0 vmguarpages 0 0 512000 512000 0 oomguarpages 6527 28169 512000 512000 0 numtcpsock 4 14 4096 4096 0 numflock 0 5 2048 2048 0 numpty 1 2 32 32 0 numsiginfo 0 3 1024 1024 0 tcpsndbuf 159600 265744 20480000 20480000 0 tcprcvbuf 65536 3590352 20480000 20480000 0 othersockbuf 44232 90640 20480000 20480000 0 dgramrcvbuf 0 12848 10240000 10240000 0 numothersock 22 31 2048 2048 0 dcachesize 0 0 10240000 10240000 0 numfile 1002 1474 50000 50000 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 24 24 2048 2048 0 Thanks

  Read the article

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• Port to use CentOS init.d functions

  - by jcalfee314

  What are good equivalent centos commands using functions in /etc/init.d/functions such as daemon to perform the following tasks? STARTCMD='start-stop-daemon --start --exec /usr/sbin/swapspace --quiet --pidfile /var/run/swapspace.pid -- -d -p' STOPCMD='start-stop-daemon --stop --oknodo --quiet --pidfile /var/run/swapspace.pid' It looks like daemon will work for the start command and killproc is used for the stop command. . /etc/init.d/functions pushd /usr/sbin daemon --pidfile /var/run/swapspace.pid /usr/sbin/swapspace . /etc/init.d/functions killproc -p $(cat /var/run/swapspace.pid) Would the --oknodo be needed in the CentOS env (the swap file is really only boot-time)? "oknodo - Return exit status 0 instead of 1 if no actions are (would be) taken." I don't see quiet in daemon or killproc, I can't imagine that it would matter though. The original start-stop-daemon for swapspace seems to have both -p and --pidfile (the same command). That must be an error. Did I miss anything? Any idea why daemon not create the pid file?

  Read the article

• Windows 7 Paging file apparently not being used

  - by Daniel F.

  I'm running Windows 7 Home Premium 32bit on a mobo with 24GB RAM. Of those 24GB, 20GB are assigned as a RAMDISK via ASRock XFastRAM. This RAMDISK has the drive letter X assigned to it. On X:\ I'm storing the temporary files folder, as well as pagefile.sys. Pagefile.sys has 6GB of size. The X:\ has usually around 14GB free space, so the temporary files are negligible, it's mostly the browsers which are storing their caches on there. Now my issue is that Firefox is crashing a lot on me, no error message pops up, but I know that this is because it's out of memory. I could kind of live with that, but now that I switched from using Eclipse to Android Studio, I know that I'm in trouble, because Java isn't capable of allocating, and Android Studio, together with the Java instances it launches, is quite a memory hog. So I tried to figure out what's wrong, and apparently Windows isn't swapping out memory onto the paging file. While my applications are crashing (firefox) / not starting (java vm's), the paging file is only using constantly around 15% of its size (checked with the performance monitor). 15% equals to 1GB aprox. I know that the correct solution would be to switch to 64 bit Windows, but I had to use the 32 bit version because of driver issues which I had about two years ago, and I guess that I'll have them again if I reformat and install the 64 bit version. Also, the machine is running quite stable, the only issue is the memory, so I'd like to use it as it is (as the apps are installed and configured) Is there a way to make Windows use the paging file more efficiently? None of my processes require more than 1GB, I'd just like it to swap out some seldomly used stuff, like GoogleCrashHandler.exe and stuff like that in order to have "more physical memory avaliable". Is that possible?

  Read the article

• Unable to resize ec2 ebs root volume

  - by nathanjosiah

  I have followed many of the tutorials that pretty much all say the same thing which is basically: Stop the instance Detach the volume Create a snapshot of the volume Create a bigger volume from the snapshot Attach the new volume to the instance Start the instance back up Run resize2fs /dev/xxx However, step 7 is where the problems start happening. In any case running resize2fs always tells me that it is already xxxxx blocks big and does nothing, even with -f passed. So I start to continue with tutorials which all basically say the same thing and that is: Delete all partitons Recreate them back to what they were except with the bigger sizes Reboot the instance and run resize2fs (I have tried these steps both from the live instance and by attaching the volume to another instance and running the commands there) The main problem is that the instance won't start back up again and the system error log provided in the AWS console doesn't provide any errors. (it does however stop at the grub bootloader which to me indicates that it doesn't like the partitions(yes, the boot flag was toggled on the partition with no affect)) The other thing that happens regardless of what changes I make to the partitions is that the instance that the volume is attached to says that the partition has an invalid magic number and the super-block is corrupt. However, if I make no changes and reattach the volume, the instance runs without a problem. Can anybody shed some light on what I could be doing wrong? Edit On my new volume of 20GB with the 6GB image,df -h says: Filesystem Size Used Avail Use% Mounted on /dev/xvde1 5.8G 877M 4.7G 16% / tmpfs 836M 0 836M 0% /dev/shm And fdisk -l /dev/xvde says: Disk /dev/xvde: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x7d833f39 Device Boot Start End Blocks Id System /dev/xvde1 1 766 6144000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvde2 766 784 146432 82 Linux swap / Solaris Partition 2 does not end on cylinder boundary. Also, sudo resize2fs /dev/xvde1 says: resize2fs 1.41.12 (17-May-2010) The filesystem is already 1536000 blocks long. Nothing to do!

  Read the article

• 100% CPU when doing 4 or more concurrent requests with Magento

  - by pancake

  Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• Massive number of context switches on ksoftirqd

  - by Pace

  We have two servers that are grinding to a halt. One is a VM and the other is bare metal. Neither of them are running similar code but they are on the same network. It appears that an incredible number of context switches are arising from ksoftirqd (which is taking up a lot of CPU). vmstat output procs -----------memory---------- ---swap-- -----io---- -system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 605092 182496 2637556 0 0 0 0 4177 519187 8 19 73 0 0 2 0 0 605092 182496 2637556 0 0 0 0 4792 520980 8 19 74 0 0 3 0 0 605092 182496 2637552 0 0 0 0 2137 659640 18 26 56 0 0 ... pidstat output TCK4-BM-06A:~ # pidstat -w -I 5 Linux 2.6.32.12-0.7-default (TCK4-BM-06A) 07/02/2012 _x86_64_ 03:03:01 PM PID cswch/s nvcswch/s Command 03:03:06 PM 1 0.20 0.00 init 03:03:06 PM 4 386666.27 0.00 ksoftirqd/0 03:03:06 PM 6 0.60 0.00 ksoftirqd/1 03:03:06 PM 8 378213.17 0.00 ksoftirqd/2 03:03:06 PM 10 0.20 0.00 ksoftirqd/3 03:03:06 PM 12 0.20 0.00 ksoftirqd/4 03:03:06 PM 26 377115.37 0.00 ksoftirqd/11 03:03:06 PM 27 1.80 0.00 events/0 03:03:06 PM 28 1.00 0.00 events/1 03:03:06 PM 29 1.00 0.00 events/2 03:03:06 PM 30 1.00 0.00 events/3 03:03:06 PM 31 0.80 0.00 events/4 03:03:06 PM 32 0.80 0.00 events/5 ... My initial thought is that, since both are on the same network, something is flooding the network. Is this consistent with the data?

  Read the article

• After installing Windows 7, I can no longer get to Debian 6 (dual boot)

  - by Jeremy

  I had Debian 6 on my machine (Dell Vostro 260) and used GParted to shrink the partition. I then tried installing Windows 7 on that partition. After Windows 7 installed, I could not choose which OS to run. It would just boot into Windows. I ran GParted again, and saw that Windows created another partition, labeled "System Reserved". That partition had the boot flag set. I tried moving the boot flag to other partitions, including my Debian partition and one with a file system "linux-swap". No option would actually load an OS or anything except for the Windows partition, which is not what I want. Is it worth it to try to fix this installation, or should I start over. I have all my data backed up, so I can easily install from scratch if I need to. If I do start from scratch, which OS should I install first? And then, how do I set up the partitions to install the other OS? Let me know if you have any questions. Thanks for your help.

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . Thanks.. Ian

  Read the article

• Recovering ZFS pool with errors on import.

  - by Sqeaky

  I have a machine that had some trouble with some bad RAM. After I diagnosed it and removed the offending stick of RAM, The ZFS pool in the machine was trying to access drives by using incorrect device names. I simply exported the pool and re-imported it to correct this. However I am now getting this error. The pool Storage no longer automatically mounts sqeaky@sqeaky-media-server:/$ sudo zpool status no pools available A regular import says its corrupt sqeaky@sqeaky-media-server:/$ sudo zpool import pool: Storage id: 13247750448079582452 state: UNAVAIL status: The pool is formatted using an older on-disk version. action: The pool cannot be imported due to damaged devices or data. config: Storage UNAVAIL insufficient replicas raidz1 UNAVAIL corrupted data 805066522130738790 ONLINE sdd3 ONLINE sda3 ONLINE sdc ONLINE A specific import says the vdev configuration is invalid sqeaky@sqeaky-media-server:/$ sudo zpool import Storage cannot import 'Storage': invalid vdev configuration I should have 4 devices in my ZFS pool: /dev/sda3 /dev/sdd3 /dev/sdc /dev/sdb I have no clue what 805066522130738790 is but I plan on investigating further. I am also trying to figure out how to use zdb to get more information about what the pool thinks is going on. For reference This was setup this way, because at the time this machine/pool was setup it needed certain Linux features and booting from ZFS wasn't yet supported in Linux. The partitions sda1 and sdd1 are in a raid 1 for the operating system and sdd2 and sda2 are in a raid1 for the swap. Any clue on how to recover this ZFS pool?

  Read the article

• Windows disk change monitoring for malware analysis

  - by SuperDuck

  Not sure if this question belongs to here, because it has some relations with 'serverfault' (system backups) and 'stackoverflow' (software analysis). I'm looking for a solution to monitor disk changes on a Windows system and selectively revert them. It should be able to handle live files like registry parts, so may need to be an offline backup software. It shouldn't silently pass over files which the current admin user doesn't have permissions on (files with no permission entries or owned by the 'system' user) Registry change tracking would be a bonus but is not a requirement I use virtual machines for malware analysis, there is even no solution to list file changes in disk snapshot files (delta VMDK). I currently use Ashampoo for monitoring changes. Though it's the best one between similars, it's not a good software and hasn't really evolved in many 'platinum', 'deluxe' versions released in the last 10 years (it even used non-resizable windows until the latest version). The real problem is it misses some disk / registry changes. Perhaps it only compares modification dates and doesn't catch a change if the dates are preserved. So, I think the solution should compare files using hashes, or file sizes at least. There are numerous backup software out there and I'm sure one can handle this, offline or online.

  Read the article

• In APC+PHP, how much RAM is too much? Is it okay to set apc.shm_size to many GB?

  - by Jeremy Clarke

  On our server we have a LOT of RAM for our traffic levels (16GB). The HTTP processes regularly eat up all CPU and need to be restarted without even getting close to using swap memory, so I'm looking for ways to spend RAM to ease the load on Apache (and/or help the seperate MySQL server which may be breaking Apache). I have many WordPress installs on the HTTPD instance so APC sometimes uses as much as 900MB of ram (according to the apc.php charts). Just in case I have apc.shm_size set to 1600MB which is more than it needs but not more than I can spare. This means there is usually lots of extra RAM available to APC but also very little turnover and fragmentation is never more than 1%. Is this dangerous? Should I be slimming down APC to less than 1GB just on principle? Should I be expecting some turnover within APC in the name of bringing it's overall footprint down? Having so much memory devoted to APC means that in top/htop every single httpd process shows ~1.9GB in the VIRT memory column. Obviously this is shared memory and not used per-process, but could it be hurting our server? NOTE: The problem with the server remains unclear but the effect is that about 60 times a day all 8 CPU's fill up to 100% and everything stops working until Monit sees that Apache is broken and restarts it (Monin also saves the MySQL server). I'm not sure if APC is even part of the problem but I'm trying to optimize everything just in case.

  Read the article

• Mac OS X - Time Machine backup fails verification - What can I do to save the history?

  - by usermac75

  Hi, How do I make Time Machine to make a new complete backup without losing older versions of backed up files? Verbose: I am using the Time Machine backup on my OS X (Snow Leopard) to backup the whole computer to an external drive. I especially like the "history", i.e. the feature that allows you to restore the older version of a file. Problem: I had some data corruption on my external backup drive, I repaired it with the System Tool for doing that, it found some faults. I had the disk tool repair the external drive. After that, the external drive was OK and I could use Time Machine again. I let Time Machine do one more backup. Now I made a verification according to http://superuser.com/questions/47628/verifying-time-machine-backups, namely along sudo diff -qr . $HOME/Desktop 2>&1 | tee $HOME/timemachine-diff.log However: After doing the command above, several differences and missing files were reported, approx. 200 files in sum. Whereas some of the missing files were cache or excluded directories, the differences do bother me, especially as some important documents from me are listed as differing. How can I make sure that the data on the external drive is synced correctly? Is it possible to have Time Machine to do a complete new backup without losing the history? Or to have Time Machine compare all files for differences and re-write all files that are different? Or can I set some flags on the files that do not match to have them copied again? (like the archive-flag in Windows/Dos). I'd rather not touch the files because I would like to keep the date of last change/date of creation) Thank you for your thoughts!

  Read the article

• Looking for advice on using dd to backup a dual boot laptop.

  - by AvatarOfChronos

  My questions boils down to this. If I do "dd if=/dev/sda of=usbdrive" can anybody confirm that this will get everything including mbr/partition information/all four partitions and create a drive that I can swap with the failing internal drive without losing anything? If this is done while the computer is running will it still copy everything? At this point I'm afraid to shutdown the computer for fear of it never starting again. Secondly, how tolerant is dd of failing drives? Has anybody used it to recover a half dead drive before that can share any potential pitfalls? Did it get the data ok or is this going to be a hope for the best kind of situation? And lastly, If the usbdrive is larger than the failing internal drive I'll still be able to expand the partitions later so I'm not losing space? this last part seems silly to ask but with my current streak of bad luck I'll end up overwriting some magic bit and forever turning a 640gb hdd into a 500gb hdd. Also if anybody has a better solution to create a complete clone that gets everything I'm all for hearing about it. PostScript: I had been making periodic backups however when whatever miasma that killed the laptop struck it also got the NAS :( Post PostScript: both devices were on a UPS system.

  Read the article

• Mounting fuse sshfs fails when invoked by Cron on FreeBSD 9.0

  - by Tal

  I have a remote server filesystem that I'm attempting to mount locally on a FreeBSD 9 machine via FUSE sshfs, and Cron for a backup routine. I have ssh keys between the boxes setup to allow for passwordless login as the root user on the local machine. Cron is set to run the following script (in Root's crontab): #!/bin/sh echo "Mounting Share" /usr/local/bin/sshfs -C -o reconnect -o idmap=user -o workaround=all <remote user>@<remote domain>.com: /mnt/remote_server As root, I can run this script on the command line without issue, and without being asked for a password the share mounts successfully. Yet, when run by Cron the script fails. The path to sshfs is identical to the value of which sshfs Here is the email root receives from the Cron Daemon: X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Mounting Share fuse: failed to exec mount program: No such file or directory fuse: failed to mount file system: No such file or directory I'm stumped as to why I'm receiving No such file or directory in this instance. It further seems odd given that the paths appear to be correct. I've also attempted to compare the output of env on the shell with env inserted into the script. I don't see any environment variables that should cause this trouble. At bootup, FUSE reports its version as: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Help me ServerFault wizards, you're my only hope!

  Read the article

• Computer loop restarts on Windows loading

  - by Robinson G.

  My computer restarts, just after or during Windows loading (4 squares getting together), or after some time on the desktop IF I'm idle. In order to start the computer I either have to swap my RAM (24Go) in differents DIMM slots, for example (I have 4 slots) : 1-2-4 or 2-3-4 or 1-3-4, not the same position each boot or it restarts in a loop... I can also change the ram timing from 1.5 to 1.6V and it starts, at the next reboot I have to change it again to 1.5 or it won't boot... And If after all, I succeed to boot, I have to use the computer for about 10 minutes, and it's ok, if I don't, it restarts by itself after some minutes. If I stay on the BIOS, It's all OK, I can stay for a whole year without restarting. I have check my RAM on Memtest (4*8G SDRAM DDR3) : OK I have check without graphic card : Still the same. I tried to reset the bios stack by getting it off and on : Still the same. I tried to reset my BIOS, and many settings about the RAM in the menu : Still the same. CPU temps are just fine (around 35°C) I was thinking ofc about the motherboard but I want to be sure. Motherboard : MSI zh77a-g43 RAM : 4*8G Dual Mode or not (depends on the number I put ofc.) PSU : 600W (enough to run all the config) CPU : i7 3770 non K

  Read the article

• Fresh install CentOS 6.4 64b with directadmin slowly consumes all memory and crashes

  - by Coen Ponsen

  Dear server fault community, This is my first question on server fault, i'm new to server (mis)configuration so please forgive me for asking something stupid :) I'm running Directadmin on a CentOS 6.4 64b with 4GB memory and over 10000Gh virtual machine. I migrated my websites because my former vps couldn't keep up anymore. Only half of the websites from this 1GB machine were migrated jet. So the migration is still in progress and already my server crashes every day. The server performance up until that moment is perfect. The directadmin log files show nothing out of the ordinary. Yesterday only the mysql server crashed but it also crashed the entire machine before. The memory usage in DA seems to be normal: directadmin directadmin (pid 3923 22158 22159 22160 22161 22162 )8.75 MB dovecot dovecot (pid 3851 ) 47.8 MB exim exim (pid 1350 ) 1.29 MB httpd (pid 21525 21528 21529 21530 21531 21532 21546 21571 21742 21743 21744 )490.4 MB mysqld mysqld (pid 1299 ) 287.8 MB named named (pid 3807 ) 16.3 MB proftpd proftpd (pid 1481 ) 1.91 MB sshd sshd (pid 1173 21494 ) 5.16 MB Restarting services immediately frees up memory, but slowly over time the memory usage increases(about 24 hours to crash). The commands: # sync # echo 3 > /proc/sys/vm/drop_caches Will free al memory correct. I could just create a cronjob but it seems the wrong way around to me. I can't seem to pinpoint the cause. Any advices, references or tips are highly appreciated! Greetings, Coen edit: free -m : after drop_caches: total used free shared buffers cached Mem: 3830 735 3095 0 0 21 -/+ buffers/cache: 712 3117 Swap: 991 0 991 I'll post another one this evening.

  Read the article

• VPS Memory Exchausted Even With Light Settings

  - by user101570

  Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

  Read the article

• Why is my cron daemon is being killed every few minutes?

  - by user113215

  As of about a week ago, my cron daemon refuses to stay running. I'm using Debian 6 x64 on an OpenVZ virtual machine. Running something like pgrep cron shows that the daemon isn't running. I start the service with service cron start or /etc/init.d/cron start and it launches, but it disappears from the running process list after a few minutes (varying anywhere between 1 - 30 minutes before the process is killed again). Using strace -f service cron start, I can see that the process is being killed for some reason: nanosleep({60, 0}, <unfinished ...> +++ killed by SIGKILL +++ There's nothing relevant in /var/log/syslog, /var/log/messages, /var/log/auth.log, or /var/log/kern.log to explain why the the process is dying. The system has at least 800 MB of free memory, and cat /proc/loadavg returns 0.22 0.13 0.04 so resources shouldn't be the issue. With cron running, free -m reports: total used free shared buffers cached Mem: 1024 211 812 0 0 0 -/+ buffers/cache: 211 812 Swap: 0 0 0 I also tried removing and reinstalling the cron package using apt-get. Update: I initially thought the problem was a resource issues. I erased my entire VPS and started from a fresh Debian image. There is now nothing else running on the system, but even from a clean install my cron daemon is still being killed at random. What else should I check? How do I find out what's killing my crond?

  Read the article

• Replacing the LCD panel in a netbook (Asus Eee PC 1005)

  - by neilfein

  Yesterday, I was cleaning up and dropped my Asus Eee 1005PE. The screen is cracked inside (i.e., cracks are visible only when on), and no longer works properly. I booted up with another monitor attached, and the computer itself is fine, but needs a new screen. Best Buy wants at least $250 to repair it (that includes their $150 fee to breathe in the same room as the unit), and Asus was of no help at all. (They're incredibly cagey and won't provide any money numbers at all, not even the cost of the part.) If replacing the LCD is no more trouble than replacing memory or a hard drive, I can do that. It's within my means to buy the part (18G241010402, a TFT LCD), but I'd like to know more about the procedure involved. My question: How does one replace the screen in this unit? Do I simply open the case and swap out the unit, or do I need to disassemble anything else to get to the screen? I don't want to order the part and then end up in a situation like this. Is the case screwed shut, or is it like an iPod where they glue things closed? I know enough about my abilities with a soldering gun to not attempt to solder tiny wires, would any of that be involved?

  Read the article

• Install Debian stable linux ISO from USB to dual boot Windows

  - by tgkprog

  I want debian as dual boot with my windows vista, Free'd up 50GB in my d drive. Plan to use 40 for debian install, 6GB for swap space Have a 16GB USB drive Downloaded http://unetbootin.sourceforge.net/ Downloaded DVD files of stable debian-7.0.0-amd64-DVD-1.iso ( debian-7.0.0-amd64-DVD-2.iso and 3) After I choose HD install, unetbootin says place the ISO in the same place. but I have 3. do i need to merge them? if so any freeware to do that? can i do it with 7zip? when I extract with 7 zip there are classes between the 3 ISO files. Just over write? Options to merge (format etc for 7zip) ? Or I must use I tried to keep the 3 files with the other unetbootin files but get an error msg Files I have on my USB 06/30/2013 11:44 PM 2,835,648 ubnkern 06/05/2013 12:14 AM 3,998,007,296 debian-7.0.0-amd64-DVD-1.iso 06/04/2013 03:30 PM 4,696,872,960 debian-7.0.0-amd64-DVD-2.iso 06/05/2013 01:25 AM 4,698,955,776 debian-7.0.0-amd64-DVD-3.iso 06/30/2013 11:45 PM 6,530,278 ubninit 06/30/2013 11:46 PM 155 syslinux.cfg 06/30/2013 11:46 PM 60,928 menu.c32 also i can only copy above files if i format my USB as NTFS On FAT32 says too large to copy .iso How do I get around that? My internet needs a login so cannot do net install

  Read the article

• Rkhunter reports file properties have changed

  - by CountMurphy

  I am running a fully updated LTS copy of Ubuntu server. Today I ran rkhunter (as I do from time to time). This is the output I got: Warning: The file properties have changed: [15:52:25] File: /bin/ps [15:52:25] Current hash: f22991ec93ae966c856d367f42fc3d8a484bd827 [15:52:25] Stored hash : 1892268bf195ac118076b1b0f53e7a637eb6fbb3 [15:52:25] Current inode: 142902 Stored inode: 130894 [15:52:25] Current file modification time: 1324307913 (19-Dec-2011 07:18:33) [15:52:25] Stored file modification time : 1260992081 (16-Dec-2009 11:34:41) Warning: The file properties have changed: [15:52:33] File: /usr/bin/ldd [15:52:33] Current hash: f1e2ca5aa3a28994e2cebb64c993a72b7d97b28c [15:52:33] Stored hash : 295d9cedb121a5e431a39a6d201ecd7ce5640497 [15:52:33] Current inode: 2236210 Stored inode: 2234359 [15:52:33] Current size: 5280 Stored size: 5279 [15:52:33] Current file modification time: 1331165514 (07-Mar-2012 16:11:54) [15:52:33] Stored file modification time : 1295653965 (21-Jan-2011 15:52:45) Warning: The file properties have changed: [15:52:37] File: /usr/bin/pgrep [15:52:37] Current hash: 3eada9a96760f3e2c9111cfe32901d1432813c1d [15:52:37] Stored hash : ce265d0db9964b173fe5036f703a9b8d66e55df3 [15:52:37] Current inode: 2229646 Stored inode: 2224867 [15:52:37] Current file modification time: 1324307913 (19-Dec-2011 07:18:33) [15:52:37] Stored file modification time : 1260992081 (16-Dec-2009 11:34:41) Warning: The file properties have changed: [15:52:41] File: /usr/bin/top [15:52:41] Current hash: 6be13737d8b0950cea2f1ae3a46d4af713dbe971 [15:52:41] Stored hash : c7b495ecef3982eeb6f08a511861b1a1ae8775e6 [15:52:41] Current inode: 2229629 Stored inode: 2224862 [15:52:41] Current file modification time: 1324307913 (19-Dec-2011 07:18:33) [15:52:41] Stored file modification time : 1260992081 (16-Dec-2009 11:34:41) Warning: The file properties have changed: [15:52:53] File: /usr/sbin/cron [15:52:53] Current hash: e783ca973f970aa8a4bf5edc670e690b33914c3d [15:52:53] Stored hash : 4718257a8060736b9058aed025c992f02a74a5a7 [15:52:53] Current inode: 2224719 Stored inode: 2228839 [15:52:54] Current file modification time: 1330965568 (05-Mar-2012 08:39:28) There were also a few other I left out. Has my server been rooted? I am running fail2ban and do monitor failed ssh logins. nothing has come up. Could someone compare these hashes to their copy of Ubuntu Server (lts)? Please tell me these are false positives..... Edit: is something else like rkhunter I can run for a second scan?

  Read the article

• Emails sent from Coldfusion using the same SMTP/Exchange server works from one machine but fails for another

  - by Peter Herdenborg

  First, apologies if this question is too vague or has too little information to really be answerable. I am not normally working with these issues, and I don't have full access to the environment. However, the hosting provider seems to have a hard time tracking down the issue, so I am hoping that someone can at least provide me with some qualified guesses about the most likely problem. Here goes: A client I work for has a hosted IT environment, based on virtual machines running Windows 2008 R2 Standard. Our website, based on Coldfusion 9 was recently migrated from one virtual machine to another, and though Coldfusion is configured in the exact same way, using the same SMTP server, i.e. the client's Exchange server hosted in the same environment and in the same AD as both web servers, sending emails to external recipients is no longer working. It is still working fine when testing from the old machine. This is what I've learnt so far (all emails are sent using a valid from-address on the client's domain): Emails sent to other recipients on the same domain are delivered without any problem. Emails sent to external recipients on other domains are never delivered. When sending emails to both internal and external recipients, no emails are delivered. When receiving one of these emails to an internal address, the sender is now indicated as "[email protected]", while when sent from the old machine, it used to say just "sender". This seems to me that it could hint that the Exchange machine "recognizes" the old web server while it is a stranger to the new. In Coldfusion's mail log, all messages appear to be successfully delivered to the SMTP server. Any ideas what settings to look at, what log entries to search for or how to compare the old web server with the new one will be highly appreciated.

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >