Search Results

Search found 9371 results on 375 pages for 'existing'.

Page 167/375 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Boot camp with Vista crashes on startup

  - by Mark Pim

  I have a 2006 vintage MacBook Pro (Intel Core 2 Duo) and have been using Boot Camp since it was in beta. I had been running XP SP2 on it with Tiger quite happily. I've recently wiped and reinstalled everything to upgrade to Leopard. After installing Leopard, I fired up the Boot camp assistant and used it to install the Windows 7 RC. That worked really nicely, but my HFS+ driver didn't work under Windows 7 yet so I decided to install Vista instead. I didn't repartition the drive, just launched the Vista installation disk from BIOS and told it to overwrite the existing Windows 7 install. It installed fine and I installed the Boot Camp drivers, still all fine. Now, however, every time I boot into Windows and login it hard reboots itself as the desktop is appearing. After this it works fine again. Until the next power off. Has anyone had any similar problems? Or can offer suggestions on how to solve this?

  Read the article

• Subversion LDAP Configuration

  - by dbyrne

  I am configuring a subversion repository to use basic LDAP authentication. I have an entry in my http.conf file that looks like this: <Location /company/some/location> DAV svn SVNPath /repository/some/location AuthType Basic AuthName LDAP AuthBasicProvider ldap Require valid-user AuthLDAPBindDN "cn=SubversionAdmin,ou=admins,o=company.com" AuthLDAPBindPassword "XXXXXXX" AuthLDAPURL "ldap://company.com/ou=people,o=company.com?personid" </Location> This works fine for living, breathing people who need to log in. However, I also need to provide application accounts access to the repository. These accounts are in a different OU. Do I need to add a whole new <location> element, or can I add a second AuthLDAPURLto the existing entry?

  Read the article

• How to repair unbootable Fedora install

  - by Cerin

  How do you repair/reinstall Fedora without deleting any existing partitions or data? I was attempting to upgrade some old Fedora 13 servers to 17, following the instructions in the wiki. After the 14-15 upgrade, rebooting resulted in the output: Dropping to debug shell. sh: can't access tty; job control turned off dracut:/# Running dmesg also shows: dracut Warning: No root device "block:/dev/mapper/VolGroup-lv_root" found Googling shows this error is typically related to some weird RAID issues, but my server is a virtual machine not using any RAID. Using a rescue CD, I can chroot /mnt/sysimage, and all packages and data still seems to be there. How do I make the system bootable again?

  Read the article

• VMWARE V2V migration without shared storage

  - by TheCleaner

  I would like to do the following: Take Physical box running w2k8r2 and Sql2008R2 and do a P2V on it to a 4.1 Enterprise licensed cluster. --no worries here, I can do that part-- Take the existing physical box that is freed up and install vmware hypervisor 5.0 on it. --again I can do this part-- Do a v2v migration of the VM created in step #1 above from the Enterprise 4.1 Cluster to the standalone host. They are NOT using shared storage. Step #3 is where I'm confused as to what my best option is. I found an article online talking about using Veeam FastSCP and just shutting down the vm on the cluster, removing it from inventory, copying the files over to the new host and then adding it to inventory. Is that the best way to accomplish this?

  Read the article

• Recommend an SFTP solution for Windows (Server & Client) that integrates well with Dreamweaver

  - by aaandre

  Could you please recommend a secure FTP solution for updating files on a remote windows server from windows workstations? We would like to replace the FTP-based workflow with a secure FTP one. Windows Server 2003 on the remotely hosted webserver, WinXP on the workstations. We manage the files via Dreamweaver's built-in FTP. My understanding is Dreamweaver supports sFTP out of the box so I guess I am looking for a good sFTP server for Windows Server 2003. Ideally, that would not require cygwin. Ideally, the solution would use authentication based on the existing windows accounts and permissions. Thank you!

  Read the article

• Is Family Tree Maker 2011 the right upgrade?

  - by bill weaver

  My father has used Family Tree Maker for years, but hasn't upgraded since version 11. It is difficult to tell from reviews at Amazon and other places whether upgrading to FTM 2011 is a good choice. File incompatibilities and upgrade woes sound like customer service is lacking, and i've read reports of it uploading your data to their database but then trying to sell you a download of data. Looking at the ancestry.com site makes me think it's solely about selling add-ons and upgrades. On the other hand, the feature set seems fairly rich and the software has a pretty strong following. I was able to get Gramps working on my system, but that's not going to work for my dad. Any advice on a good upgrade path? Doesn't necessarily have to be FTM. The only requirement is a way to import his existing data.

  Read the article

• Can't delete keyboard shortcut set for a .ink file

  - by Sirhaian

  So, I installed the Chrome App Launcher on my PC (now on Win8.1) a few weeks ago, and, as I use it very often, I wanted to assign a keyboard shortcut for it. So, I right-clicked the icon on my desktop, and I assigned Ctrl+Alt+<. The problem is... I moved the shortcut to my taskbar, and suddenly noticed that when I wanted to write the "\" (on a Belgian keyboard), it launched the Chrome App Launcher, which is very annoying. I wanted to change it back, but I can't... I deleted the taskbar shortcut, but the keyboard shortcut still launches the App Launcher. I also tried creating a new shortcut with the same association, hoping that it would crush the existing one, but it didn't work. I searched on Google for similar issues, and I couldn't find any... x~x So... How can I delete this shortcut association..?

  Read the article

• Software to draw custom street maps?

  - by jay

  I'm looking for any (Windows) software that allows me to draw custom street maps. I'm not looking for something that displays existing maps from real places, but something that allows me to define my own map. Obviously this can be achieved through any graphics program however I am wondering if there's a software which makes it almost drag-drop easy to create your own maps of visual quality to that of Open Street Maps, Google Maps, street directories etc. Preferably an offline desktop app with attention on design rather than complex geospacial specifics. Context: I want to make a detailed street map for a game I'm making.

  Read the article

• Custom Windows AMI for Amazon EC2

  - by cutyMiffy

  Hello: I am new to the Amazon EC2 services and I am planning to host a Windows based vm on Amazon. I have lot of fuzziness about AMIs on Amazon. So my first question would be, am I be able to install softwares and frameworks(e.g. Silverlight, .NET, etc) on a existing Windows instance that I select? And if not, how can I create a custom AMI so that I can install these softwares that I need before I submit it to Amamzon and launch? Thanks a lot for your help :) Deeply appriciated

  Read the article

• Minimizing windows to tray in xfce

  - by Gryllida

  For XFCE (v. 4.8), I'm searching for possible options to minimize windows to tray (iconify). This means that 1) they're not in the window listing and 2) they're not in the alt+TAB menu and 3) when closed, the window hides (it disappears from window listing but still stays running). "alltray" has some weird GTK-related bug (https://bugs.launchpad.net/alltray/+bug/589831; windows hide but unhiding doesn't do anything; they stay in the tray icon until the user undocks them). "trayer" complains that "another systray is already running" and there's no obvious workaround. This question here is to ask about possible minimalistic (as everything in XFCE is) solutions which don't involve manual compiling, and aren't an overkill like cairo-dock is (a rather bloated gnome-style application which creates a new large 'tray' instead of using the existing one). Thanks!

  Read the article

• Removing DS_Store files and variants?

  - by Ron Gejman

  I am running an Ubuntu 10.04.1 LTS server. Frequently I open up files using AFP from my Mac. Inevitably this created .DS_Store files on the server (although for some reason they are named :2eDS_Store. However, it also creates variants on DS_Store files. These variants are often named similarly to other files in that directory. E.g.: ~$ ls total 60K -rw-r--r-- 1 tarakhovsky 16K 2010-11-30 18:28 :2eDS_Store drwx--S--- 4 tarakhovsky 4.0K 2010-11-08 13:58 :2eTemporaryItems/ lrwxrwxrwx 1 tarakhovsky 15 2010-10-19 17:44 bigdisk -> /media/bigdisk// ... drwxr-xr-x 3 tarakhovsky 4.0K 2010-11-03 18:24 Temporary Items/ drwxr-xr-x 3 tarakhovsky 4.0K 2010-11-30 01:34 tmp/ ... I've disabled creation of DS_Store files using: defaults write com.apple.desktopservices DSDontWriteNetworkStores true so hopefully this won't continue to occur—but I really want to get rid of all of the existing variants of DS_Store files already on the server. Any ideas as to why these variants are being created and how I can get rid of them all?

  Read the article

• Attempting to install .NET framework 4 *full* installs *client* instead

  - by msorens

  On a Win7 SP1 32-bit machine, I initially had .NET 4 client installed and wanted to upgrade to .NET 4 full. I downloaded the full installer dotNetFx40_Full_x86_x64.exe from Microsoft. After download the file showed 48.11MB, the correct size for the full package (vs. 41MB for the client). I ran the installer and it first prompted to repair or remove the existing package. I chose to remove, so uninstalled the two parts, 4 extended and 4 client. Reboot. I reran the installer and it began installation, showing that it was installing the client. Though this raised an eyebrow for me, I let it run to completion, thinking it might be reporting the full install in sections. But after completion, I again ended up with 4 extended and 4 client installed! Obviously I am missing something; ideas...?

  Read the article

• Destination host unreachable, but the errorlevel is 0 (from a win7)

  - by Doron

  From a windows 7 machine, I ping a non existing ip address. C:ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. *what I am trying to do, is figure out if a remote machine is replying to ping. One of my test is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0 *

  Read the article

• Best FFDShow settings for upscaling SD content to 1080p HD?

  - by Richard

  Hi there, I'm running Windows Media Center 7 with ffdshow-tryouts for the decoding of many of the popular video formats. It works great. I've now upgraded my television from SD to 1080p HD and, naturally, I've still got a large number of existing MP4/XviD/DivX items of content which is in SD. I'd like, therefore, to modify the settings of ffdshow so that they are upscaled to 1080p as best as possible. I appreciate that they won't be as good as their HD equivalent - but on the flip side, I'm pretty certain I can do more than just resizing the picture to get the best possible output. Can anyone recommend the best settings in ffdshow to do this? For example, should I apply a sharpen mask? Or Noise Reduction? Or Deinterlace? Alternatively, would it be better to keep them at their current resolution and let the TV (Samsung Series 5 LE32C580) do the upscaling? Thanks.

  Read the article

• Easiest way to move my Windows installation to an SSD?

  - by Jon Artus

  I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

  Read the article

• Windows Mobile deletes my Contacts when deleting a partnership

  - by bitbonk

  Sometimes when I reinstall my PC get a new Work PC or buy a new home PC ,ActiveSync, now the Device Center asks me to delete an existing partnership to setup a partnership with the new PC, since only two partnerships are allowed. When I delete that partnership all contacts that originally came from that partnership get deleted too. How can I prevent that from happening. Do I really always have to remember to frequently backup all my contacts in a safe place? How much redundancy is needed. I hat them on one of my PCs and on my phone.

  Read the article

• "Bad response to Storage command" when scheduling job with Bacula

  - by Joril

  I have a Bacula setup with 9 clients, and it's working happily. Today I had to add another client, so I went and copied+adapted the existing configuration files from another client, but when I schedule a job for the new client, I get these errors: 20-Mar 17:50 tools-dir JobId 39: Start Backup JobId 39, Job=BackupPresenze2.2012-03-20_17.50.49_04 20-Mar 17:50 tools-dir JobId 39: Using Device "FileStorage" 20-Mar 17:50 presenze2-fd JobId 39: Fatal error: Failed to connect to Storage daemon: bacula.mylan.local:9103 20-Mar 17:50 tools-dir JobId 39: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 Bad storage From the client I can telnet to bacula.mylan.local:9103 just fine, and jobs for other clients work successfully... What could I check? (Server and client run Ubuntu 10.04, if it's relevant)

  Read the article

• Moving WSS sites to a new SharePoint 2010 Foundation server

  - by Gustavo Cavalcanti

  This existing question helps but it doesn't answer all my questions. I have WSS 3 running on Server1 (Server 2003) and its database is DBServer1 (SQL 2008). I have installed SharePoint 2010 Foundation on Server2 (Server 2008) with databases on DBServer2 (SQL 2008 R2). SP 2010 Foundation is up and running ok and it already has one newly created Web Application. Now my goal is to copy all sites from Server1/DBServer1 to Server2/DBServer2 (and eventually retire Server1/DBServer1). Could you please help me with a step-by-step list on how to accomplish this? Thank you!

  Read the article

• Time Machine/iMac loses all trace of external hard drive after a few days

  - by Bill

  First time posting, also a Mac newbie (recent windows convert) so I'm hoping I can get some help here :) I have a Hitachi Deskstar drive in an external casing that I got from ebuyer. (its one of those unknown fairly cheapish enclosures) connected via firewire. I hook it up and it works fine, but then at some point over the next week or so I'll realise that my last update was 3 days ago or so. At this point the Mac will not recognise the drive as existing and the only thing to do is switch off and on the external enclosure. It then works fine for a while. If I had to guess I'm assuming its powering down or something when the Mac goes into standby? Is there anyway to solve this?

  Read the article

• Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

  - by Charles Long

  I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

  Read the article

• Cold Fusion 8 and 9 on IIS 6

  - by David Mesh

  I have a client, who against my better judgement has insisted on doing the following. They have a single IIS 6 on Win 2003 Server Enterprise. It currently runs ColdFusion 8. They want me to install ColdFusion 9 on the server without changing any of the existing sites so that they can develop in CF 9 and upgrade other sites in the future. Yes, I have begged them to use a Dev server, or run on apache on the same box. Can this even be done? Many thanks in advance! DM

  Read the article

• Citrix XenApp application does not have keyboard focus when launched

  - by Jason Pearce

  On new or existing Citrix XenApp 4.5 servers, I am having problems streaming the Allscripts Pro EHR application via the XenApp web interface. When users launch the application via the Citrix XenApp web interface, the application does not have focus, preventing users from typing in their username and password. If they use their mouse to select either the username or password fields, they still cannot enter any text. However, if they do any of the following actions, they can then enter in their username and password and the application runs without problems: Click on the Login button with empty fields. Logon fails but they can then enter their credentials. Minimize the login window and then maximize it. They can then gain keyboard focus to enter their credentials. What might be preventing this particular application from having focus when it launches?

  Read the article

• Minimal Lunix distribution with sshd and apt

  - by Sergey Mikhanov

  When I signed up for my Debian Linux VPS hosting and first logged on and invoked ps, there was the only user process running: sshd. As I can see, this was minimal Linux with only two things installed and configured: sshd and apt (plus all dependencies, of course). I want to build (or use existing) similar Linux distro, any advice on how to build (or pick) one? Googling "minimum linux", or "linux with sshd only" usually brings up Debian's netinstall, which is not what I want. Thanks in advance.

  Read the article

• Switching to Linux, Need backup help

  - by Stephen

  I have an existing Vista installation on my thinkpad x200 and I want to install Linux on my machine. I've done this several times already but I usually format the whole disk and dual boot on Windows and Linux. Which means I have to reinstall and reconfigure everything I had on Windows. What I want to do is backup my windows installation (into an image) and start a clean Linux installation, and run the windows image thru Vmware or Virtualbox. Whats the easiest way to do this? any free tools available? I've seen acronis but dont wanna buy it for a 1 time session only.

  Read the article

• Is there any way to access the mp3 or other file type tags from within an ipod touch/iphone?

  - by quixotic1

  I am just looking for an existing app that will let me read all the tags that are stored in a particular song on my ipod touch/iphone. I'm not much of a programmer, but would be willing to learn the iphone sdk (on windows) if I could build a program that would do this for me. I would love to be able to modify the tag while on the iphone, but just viewing them would be a great use to me. I'd like to read the Year tag, the comments tag, composer, etc. It's so annoying that I can't do this. Or can I already and I just don't know how. Yes, I know how to view the lyrics tag. Seems they could have included the other tags. Help please? Thanks, Dave

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >