Search Results

Search found 20388 results on 816 pages for 'nvidia current'.

Page 167/816 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Full brightness and keyboard backligh at boot

  - by joelalmeidaptg

  I own an Asus N56VZ, and each time I start Ubuntu (13.10 and prior versions) my screen brightness and keyboard backlights reset their values to the max. Ubuntu doesn't save my settings on reboot. I was wondering if someone could help me with this? It is horrible when, at night, I turn on my computer - it is like looking directly to the sun, and it hurts my eyes. I tried googling and none of the pages I found actually helped. I think my issue might be grub-related. I have a dual-boot with Windows 8.1, so before I start my computer I see grub to choose my operating system. My screen starts at full brightness as soon as I reach grub. Maybe he is making the OS forget about my last values, overriding it with its? Does someone knows how to solve this? Thanks in advance :) PS: I'm using bumblebee with Nvidia driver 304, but this issue existed before I installed it.

  Read the article

• Context switches much slower in new linux kernels

  - by Michael Goldshteyn

  We are looking to upgrade the OS on our servers from Ubuntu 10.04 LTS to Ubuntu 12.04 LTS. Unfortunately, it seems that the latency to run a thread that has become runnable has significantly increased from the 2.6 kernel to the 3.2 kernel. In fact the latency numbers we are getting are hard to believe. Let me be more specific about the test. We have a program that has two threads. The first thread gets the current time (in ticks using RDTSC) and then signals a condition variable once a second. The second thread waits on the condition variable and wakes up when it is signaled. It then gets the current time (in ticks using RDTSC). The difference between the time in the second thread and the time in the first thread is computed and displayed on the console. After this the second thread waits on the condition variable once more. So, we get a thread to thread signaling latency measurement once a second as a result. In linux 2.6.32, this latency is somewhere on the order of 2.8-3.5 us, which is reasonable. In linux 3.2.0, this latency is somewhere on the order of 40-100 us. I have excluded any differences in hardware between the two host hosts. They run on identical hardware (dual socket X5687 {Westmere-EP} processors running at 3.6 GHz with hyperthreading, speedstep and all C states turned off). We are changing the affinity to run both threads on physical cores of the same socket (i.e., the first thread is run on Core 0 and the second thread is run on Core 1), so there is no bouncing of threads on cores or bouncing/communication between sockets. The only difference between the two hosts is that one is running Ubuntu 10.04 LTS with kernel 2.6.32-28 (the fast context switch box) and the other is running the latest Ubuntu 12.04 LTS with kernel 3.2.0-23 (the slow context switch box). Have there been any changes in the kernel that could account for this ridiculous slow down in how long it takes for a thread to be scheduled to run?

  Read the article

• Wireless Bridge -DHCP

  - by Usta

  I was thinking of picking up a couple of TP-Link wireless routers, and setting them to bridge. I have a sep. LAN network that would have one of them, and I'd put one on my internet connection. Would I be able to keep my current IP subnets? (255.255.255.0 and 255.0.0.0) or would I have to pull my IPs from the same IP range. (I want to keep my current DHCP servers in place) The reason I want a bridge is so that I can VPN into the internal network.

  Read the article

• Hulu desktop stopped working on my Dell

  - by jwdinkc

  After last weeks flash update Hulu desktop no longer works on my Dell laptop though it still works on my HP Desktop. Here's what CLI tells me on the Dell: Inspiron-1564:~$ huludesktop Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I tried: sudo apt-get install libvdpau_nvidia.so but got E: Unable to locate package libvdpau_nvidia.so and E: Couldn't find any package by regex 'libvdpau_nvidia.so' Hulu does work through the browser and through XBMC. XBMC just doesn't seem to match the video quality of the Hulu Desktop. I don't really know why a nvidia.so is needed for my Intel graphics that comes on Dell Insiron 1564's. anyway. So, do you guys have a solution?

  Read the article

• On a dual monitor setup, how can I set which lone monitor the ALT-TAB interface appears?

  - by conner_bw

  On a dual monitor setup, how can I set which monitor the ALT-TAB (or ALT+`) interfaces appear? Right now, it's flying all over the place, possibly based on on which app is focused? I'm not sure. In any case this is not useful to me. I spend 80% of my time staring at the monitor in front of me, and sometimes I turn my head to the left to look at logs, or whatever. When I press ALT-TAB or ALT+`, I want the interface to appear, 100% of the time, on the monitor in front of me. Geforce GT 430, NVIDIA binary drivers, Ubuntu 12.04 LTS. Help?

  Read the article

• installed 12.04 fine. updated graphics driver. now solid puprle screen.

  - by Zephium

  Purchased a new msi ge 70 series labtop. nvidia card gtx 765m. updated driver after install, and ran update manager. All seems well. restarted as required. Now i have a solid purple screen, even if i use boot menu to recovery mode. all i can do is access grub menu 3.10. live cd will run but i get purple screen and cant see choices. please help and im still learning ubuntu. noob talk prefered. i hate making more mistakes. Thanks also tryed changing lines of kernal code using "e" on boot menu, nomodeset and the like. not helping. any way to fix problem through grub?

  Read the article

• Close lid option "Do nothing" absent

  - by Jaap

  I just unpacked my new Sony Vaio, with windows 8 pro installed. Everything is nice, so I tried setting my power management options. The "When I close the lid" option only list: Hibernate Sleep Shutdown The "Do nothing" option is not present. I've seen loads of stuff on google where people ask or explain how to set this option to "Do nothing", but in all my power plans this option is absent... Can I use a tool to prevent this, or is there a way to force windows to show me this option (and that it actually works)? UPDATE powercf /q guid gives me this output: Subgroup GUID: 4f971e89-eebd-4455-a8de-9e59040e7347 (Power buttons and lid) GUID Alias: SUB_BUTTONS Power Setting GUID: 5ca83367-6e45-459f-a27b-476b1d01c936 (Lid close action) GUID Alias: LIDACTION Possible Setting Index: 000 Possible Setting Friendly Name: Sleep Possible Setting Index: 001 Possible Setting Friendly Name: Hibernate Possible Setting Index: 002 Possible Setting Friendly Name: Shut down Current AC Power Setting Index: 0x00000000 Current DC Power Setting Index: 0x00000000 Other sections have different enumerations where 000 stands for No action

  Read the article

• How do you ensure consistent experience across multiple graphics cards (or even driver versions)?

  - by Grigory Javadyan

  So I was writing a simple 2D game with OpenGL and SDL and had this problem when there was awful tearing when running in windowed mode (even though I explicitly asked SDL_SetVideoMode to use double buffering). Didn't worry about it all too much because most of the time the game grabs the entire screen, windowed mode is just for debugging. Anyway, yesterday I updated my nVidia drivers and tearing disappeared, the game runs smooth and looks nice in windowed mode too. I can see how the problem may be in the graphics driver, but this leads to a question. Obviously, professional game developers have to deal with a lot of different hardware/software configurations. What are the techniques they use to make sure the game looks the roughly the same on different graphics cards or even the same model of graphics card, but with different driver versions?

  Read the article

• Why does my screen blank out for the duration of the Grub boot menu?

  - by hushs

  Upon booting, when I should see the GRUB menu, my monitor simply says: "No optimum mode. Recommended mode: 1600*1200". If I wait for a short while, Ubuntu starts to boot and it reaches the desktop. So I guess there is no video signal during that time, there's the grub menu but I cant see it and after the wait time everything is fine. I have the same problem when I log out for a short moment, before the log in screen is reached. and this also happens when i shut down ubuntu. The VGA is an onboard NVIDIA GeForce 7025.

  Read the article

• Radeon HD5570 HDMI Video Card 5.1 Audio doesn't work

  - by ryandlf

  I am using Ubuntu and XMBC on my HTPC and have chosen the Radeon HD5570 Video card which has an HDMI output. In the sound preferences there is no surround sound option for the video card just stereo and although I can get sound through it in XBMC, my receiver does not state Dolby Digital on movies that are in fact Dolby so its definitely not giving me the true sound it should. Does this card not support surround sound through HDMI and I somehow missed it? If that is the case does anyone have suggestion that has been tested and works? Id like to know its going to work before investing in yet another video card. UPDATE I purchased a Nvidia GeForce GTS 450, plugged it in, downloaded the proprietary driver from the system control panel, disabled the onboard audio from the BIOS (not sure if this was necessary but I did it anyways), and changed the sound settings to use the new video card. Everything works flawlessly. It was a seemless setup.

  Read the article

• Approaches for a clickable map of nations (such as a Risk game) with Spritekit

  - by Vukovitch

  I would like to create a political map where each country is clickable by tapping but I'm not sure the best way to determine which nation was selected. Imagine Risk where each country can be individually clicked to bring up additional information. My current approach is to make a sprite for each nation where every image is the size of the screen The images are mostly transparent except for the country, that way when all of the images are displayed the countries are in the correct place relative to one another. To determine if a click occurs on an individual country I look to see if the tapped location is a non transparent pixel and check that the sprite's name is one of the countries. Additionally the nation needs to glow or something when tapped as an indicator, however my current solution is yet another sprite that is displayed. This seems like a terrible approach and I was wondering what other solutions might achieve the same results. I'm pretty new to SpriteKit so I'm not entirely sure. The other idea I had was creating a single texture where each country is a different shade of gray, then when I get the tap location I do a lookup on the color at that location and get the corresponding country. However, I'm not sure how to create a hilight or glowing country effect with that method.

  Read the article

• Does TFS 2010 lock a project collection when it's being cloned?

  - by Hirvox

  We're planning to migrate a project collection currently hosted on TFS 2010 to TFS 2012. We want to keep the current installation running while resolving any issues that might arise, so we need to copy the current project collection to the new server. However, TFS doesn't allow us to attach a restored database backup directly. The database first must be detached from the original TFS installation. We can get around that limitation by cloning the project collection and detaching the clone, but we're not sure whether that would also impact the original project collection. Does TFS lock the original project collection while it's being cloned?

  Read the article

• Xubuntu and other Debian based distros slow

  - by William V

  I have a Compaq Presario SR1950NX desktop computer with the AMD64 3800+ processor and 1GB ram and it seems that Ubunutu, Xubuntu and Lubuntu are all laggy. Things seem to be slow such as clicking on menus and opening programs and the UI renders in peices. When using the browser the system slows down considerably. I ran the TOP command and I do notice that xorg hits 30 to 40 percent cpu when running the browsers. I have tried these distros on a spare P4 machine and it is even worse. As long as I don't have a several things open at one time I can manage to get around although sluggishly. I also notice that I can't get debian based distros to install in 64bit (crtc6 failure) only in 32bit. Can anyone tell me what is it that I might be doing wrong? I have an integrated Nvidia card and have tried several of the recommended drivers which sometimes result in no boot screen upon reboot. Thanks

  Read the article

• CUDA 4.1 Update

  - by N0xus

  I'm currently working on porting a particle system to update on the GPU via the use of CUDA. With CUDA, I've already passed over the required data I need to the GPU and allocated and copied the date via the host. When I build the project, it all runs fine, but when I run it, the project says I need to allocate my h_position pointer. This pointer is my host pointer and is meant to hold the data. I know I need to pass in the current particle position to the required cudaMemcpy call and they are currently stored in a list with a for loop being created and interated for each particle calling the following line of code: m_particleList[i].positionY = m_particleList[i].positionY - (m_particleList[i].velocity * frameTime * 0.001f); My current host side cuda code looks like this: float* h_position; // Your host pointer. This holds the data (I assume it's already filled with the data.) float* d_position; // Your device pointer, we will allocate and fill this float* d_velocity; float* d_time; int threads_per_block = 128; // You should play with this value int blocks = m_maxParticles/threads_per_block + ( (m_maxParticles%threads_per_block)?1:0 ); const int N = 10; size_t size = N * sizeof(float); cudaMalloc( (void**)&d_position, m_maxParticles * sizeof(float) ); cudaMemcpy( d_position, h_position, m_maxParticles * sizeof(float), cudaMemcpyHostToDevice); Both of which were / can be found inside my UpdateParticle() method. I had originally thought it would be a simple case of changing the h_position variable in the cudaMemcpy to m_particleList[i] but then I get the following error: no suitable conversion function from "ParticleSystemClass::ParticleType" to "const void *" exists I've probably messed up somewhere, but could someone please help fix the issues I'm facing. Everything else seems to running fine, it's just when I try to run the program that certain things hit the fan.

  Read the article

• Distorted graphics, problems with starting up

  - by GreenEggsAndHam64

  Using the newest version of Ubuntu, freshly installed. NVIDIA GeForce GTX 560 Ti. It's mostly the font that doesn't render well, I think. Small logos do it too, sometimes. Screenshot to clarify (see bookmarks, search bar, etc.). EDIT: Another screenshot. And, sometimes when I start up, I get only a black screen saying [OK]. I can move my mouse around, but nothing helps, except for restarting. Also, my desktop picture doesn't stay the same. Every time I start up Ubuntu it goes back to the standard purple background. They're not very serious problems, but it's all a little annoying. Thanks in advance for your help.

  Read the article

• Dell Inspiron N5110 Battery lasts only for 1.5 hours as opposed to 4 hours on Windows 7

  - by ubuntufan

  I've a Dell Inspiron N5110 laptop with the following specs: i5 processor 4 GB RAM NVIDIA GeForce GT540M Ubuntu 12.04LTS My laptop is overheating and the battery is lasting for only about 1.5 hours. I had checked if the battery indicator was problematic but it turned out it wasn't. I drained the battery to it's least possible value and that came to around 1 hr 40 minutes. In fact, I've the same problem with Debian and Xubuntu as well. I would like to get some proper solution for this. FYI: I've been having this problem since Ubuntu 11.04 but I'm not able to solve this in spite of trying various fixes like reducing brightness, Removing startup apps, Updating kernel and what not?. I'm a big fan of Ubuntu but this problem is stopping me from using Ubuntu and I'm using Win7 for 90% of the time.

  Read the article

• VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

  - by thatidiotguy

  So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

  Read the article

• Compiz ( or even compositing in general) is not starting up when I login. Solution?

  - by ender.cc

  Whenever I log into a desktop environment, it doesn't seem that compositing is starting. Unity 2D works fine, but when I go to Unity 3D Compiz doesn't start up. I have to type compiz --replace & in terminal every time I login. Another example is when I log into a Cinnamon session, theming support is suddenly gone (although this may be a separate issue). If it helps im using the latest (295.40) NVIDIA drivers. EDIT: I am having exactly the same issue in both cases, upgrading from 11.10 and with a clean installation, in 32 and 64 bits. Related post.

  Read the article

• What gaming keyboard(s) will work with Ubuntu?

  - by belacqua

  I've been looking at gaming keyboards to use on Ubuntu system. Microsoft has a few popular ones (e.g., Sidewinder X4, X6), but the programmable function keys appear to be unusable without the Windows software. (Though here's a post from someone who has a more recent project that uses usbmon and xdotool to add functions to some keys.) Another choice in my budget is the Cyborg V.05. It seems about right for my needs, but I would be depressed having a bunch of useless, nonprogrammable keys on it. Logitech has some models (e.g., the Logitech G110), though again I expect that the extensive macro capabilities (which I don't need) would be lost under Linux. There's a project called g15tools which has some code to work with older Logitech gaming models, but I don't know what the current status is. Last entry there was in March 2010. There are also a number of very old posts around the internet with regard to the Logitech G11 and G15. Compatibility with the current keyboards, Ubuntu version, and Linux kernel are suspect. I'm in the U.S., and so it appears that few of the Roccat keyboards are available, and they're over-priced. Support might be OK for these, though -- there's a short Phoronix article about Roccat improving their Linux support, and there's also a project and webpage for "Using Roccat Hardware with Linux". Honestly, the only feature I have to have is good backlighting for the keys, and if it's not wired (which is fine), the wireless capability should function. I could probably live with dead function keys, as long as they weren't in places that would interfere with things like Unity/compiz shortcuts. Any experience or suggestions? I've not seen much to inspire confidence with programmable/macro keys. There is a thread (with no solutions) on the Sidewinder X4 on ubuntuforums here. I'm also considering the Logitech Illuminated Keyboard as a possibility, even though it's not specifically a gaming keyboard. It is backlit, and it's supposed to be a nice keyboard.

  Read the article

• How do I change the output line length from the "top" linux command running in batch mode

  - by Tom

  The following command is useful to capture the current processes that are taking up the most CPU in a file: top -c -b -n 1 > top.log The -c flag is particularly useful because it gives you the command line arguments of each process rather than just the process name. The problem is that each line of output is truncated to fit on the current terminal window. This is ok if you can have a wide terminal because you have a lot of the output but if your terminal is only 165 characters wide, you only get 165 characters of information per process and it is often not enough characters to show the full process command. This is a particular problem when the command is executed without a terminal, for example if you do it via a cron job. Does anyone know how to stop top truncating data or force top to display a certain number of characters per line? This is not urgent because there is an alternative method of getting the top 10 CPU using processes: ps -eo pcpu,pmem,user,args | sort -r -k1 | head -n 10

  Read the article

• How can I get OS/X-like switch windows of same program bound to hotkey with linux GUIs?

  - by dbenhur

  On OS/X, Command-~ switches between windows associated with the program with current focus. This is very handy when toggling through a set of browser windows or editor windows, for example. A couple years ago I noticed someone using similar functionality on a Gnome linux laptop and they showed me how to set it up, but I forgot the details (so I know it's possible). I frequently switch between MacBook and a variety of linux systems running Gnome, Unity, and occasionally KDE. My Google-fu failed so I turn to stack exchange: How do I bind Alt-~ or similar key to give me functionality to switch between windows of program with current focus?

  Read the article

• How to install ubuntu 12.04

  - by William A. Jordan

  I've had ubuntu on my pc for about 5 years,after the new 12.04 version and a day and a half trying to get it to just boot up. I will take it off my pc and rely on windows. I have 5 pc's which I built and am not an amateur, After installing it numerous times and even to run it from your webpage (to no avail). Granted I do have nvidia drivers on it, but after I went to their webpage and downloaded and installed the linux driver it,it still would not boot, by the way I took 2 different pc's apart and used what I thought were compatible (I shouldn't have to do this) parts. I have it on a seperate hd which I will remove and format. Have a nice day and so long (2 much trouble).

  Read the article

• searchd under runit continues writing to the runit's log

  - by Eugene

  searchd (Sphinx) run file: #!/bin/sh set -e APP_PATH=/srv/application TARGET_USER=user exec chpst -u $TARGET_USER /usr/bin/searchd --pidfile --nodetach --config $APP_PATH/current/config/production.sphinx.conf tail /var/log/sphinx/current 2014-06-07_18:13:56.87885 precached 9 indexes in 0.497 sec 2014-06-07_18:13:57.13740 precached 9 indexes in 0.497 sec 2014-06-07_18:13:57.88113 precached 9 indexes in 0.497 sec 2014-06-07_18:13:57.89167 precached 9 indexes in 0.497 sec 2014-06-07_18:13:59.75555 precached 9 indexes in 0.497 sec 2014-06-07_18:13:59.81554 precached 9 indexes in 0.497 sec 2014-06-07_18:14:00.33466 precached 9 indexes in 0.497 sec ... it continues to write the same line until sv stop sphinx ... Everything works fine, seachd starts and responds to the queries. But how to make logs to be less repetitive? When I start Sphinx manually it prints the "precached 9 indexes" just once.

  Read the article

• Should static parameters in an API be part of each method?

  - by jschoen

  I am currently creating a library that is a wrapper for an online API. The obvious end goal is to make it as easy for others to use as possible. As such I am trying to determine the best approach when it comes to common parameters for the API. In my current situation there are 3 (consumer key, consumer secret, and and authorization token). They are essentially needed in every API call. My question is should I make these 3 parameters required for each method or is there a better way. I see my current options as being: Place the parameters in each method call public ApiObject callMethod(String consumerKey, String consumerSecret, String token, ...) This one seems reasonable, but seems awfully repetitive to me. Create a singleton class that the user must initialize before calling any api methods. This seems wrong, and would essentially limit them to accessing one account at a time via the API (which may be reasonable, I dunno). Make them place them in a properties file in their project. That way I can load the properties that way and store them. This seems similar to the singleton to me, but they would not have to explicitly call something to initialize these values. Is there another option I am not seeing, or a more common practice in this situation that I should be following?

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >