Search Results

Search found 4955 results on 199 pages for 'range'.

Page 167/199 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

  • boost::spirit (qi) decision between float and double

    - by ChrisInked
    I have a parser which parses different data types from an input file. I already figured out, that spirit can decide between short and int, for example: value %= (shortIntNode | longIntNode); with shortIntNode %= (qi::short_ >> !qi::double_) [qi::_val = phoenix::bind(&CreateShortIntNode, qi::_1)]; longIntNode %= (qi::int_ >> !qi::double_) [qi::_val = phoenix::bind(&CreateLongIntNode, qi::_1)]; I used this type of rules to detect doubles as well (from the answers here and here). The parser was able to decide between int for numbers 65535 and short for numbers <= 65535. But, for float_ and double_ it does not work as expected. It just rounds these values to parse it into a float value, if there is a rule like this: value %= (floatNode | doubleFloatNode); with floatNode %= (qi::float_) [qi::_val = phoenix::bind(&CreateFloatNode, qi::_1)]; doubleFloatNode %= (qi::double_) [qi::_val = phoenix::bind(&CreateDoubleFloatNode, qi::_1)]; Do you know if there is something like an option or some other trick to decide between float_ and double_ depending on the data type range? Thank you very much!

    Read the article

  • Why does adding Crossover to my Genetic Algorithm give me worse results?

    - by MahlerFive
    I have implemented a Genetic Algorithm to solve the Traveling Salesman Problem (TSP). When I use only mutation, I find better solutions than when I add in crossover. I know that normal crossover methods do not work for TSP, so I implemented both the Ordered Crossover and the PMX Crossover methods, and both suffer from bad results. Here are the other parameters I'm using: Mutation: Single Swap Mutation or Inverted Subsequence Mutation (as described by Tiendil here) with mutation rates tested between 1% and 25%. Selection: Roulette Wheel Selection Fitness function: 1 / distance of tour Population size: Tested 100, 200, 500, I also run the GA 5 times so that I have a variety of starting populations. Stop Condition: 2500 generations With the same dataset of 26 points, I usually get results of about 500-600 distance using purely mutation with high mutation rates. When adding crossover my results are usually in the 800 distance range. The other confusing thing is that I have also implemented a very simple Hill-Climbing algorithm to solve the problem and when I run that 1000 times (faster than running the GA 5 times) I get results around 410-450 distance, and I would expect to get better results using a GA. Any ideas as to why my GA performing worse when I add crossover? And why is it performing much worse than a simple Hill-Climb algorithm which should get stuck on local maxima as it has no way of exploring once it finds a local max?

    Read the article

  • Mysql select - improve performance

    - by realshadow
    Hey, I am working on an e-shop which sells products only via loans. I display 10 products per page in any category, each product has 3 different price tags - 3 different loan types. Everything went pretty well during testing time, query execution time was perfect, but today when transfered the changes to the production server, the site "collapsed" in about 2 minutes. The query that is used to select loan types sometimes hangs for ~10 seconds and it happens frequently and thus it cant keep up and its hella slow. The table that is used to store the data has approximately 2 milion records and each select looks like this: SELECT * FROM products_loans WHERE KOD IN("X17/Q30-10", "X17/12", "X17/5-24") AND 369.27 BETWEEN CENA_OD AND CENA_DO; 3 loan types and the price that needs to be in range between CENA_OD and CENA_DO, thus 3 rows are returned. But since I need to display 10 products per page, I need to run it trough a modified select using OR, since I didnt find any other solution to this. I have asked about it here, but got no answer. As mentioned in the referencing post, this has to be done separately since there is no column that could be used in a join (except of course price and code, but that ended very, very badly). Here is the show create table, kod and CENA_OD/CENA_DO very indexed via INDEX. CREATE TABLE `products_loans` ( `KOEF_ID` bigint(20) NOT NULL, `KOD` varchar(30) NOT NULL, `AKONTACIA` int(11) NOT NULL, `POCET_SPLATOK` int(11) NOT NULL, `koeficient` decimal(10,2) NOT NULL default '0.00', `CENA_OD` decimal(10,2) default NULL, `CENA_DO` decimal(10,2) default NULL, `PREDAJNA_CENA` decimal(10,2) default NULL, `AKONTACIA_SUMA` decimal(10,2) default NULL, `TYP_VYHODY` varchar(4) default NULL, `stage` smallint(6) NOT NULL default '1', PRIMARY KEY (`KOEF_ID`), KEY `CENA_OD` (`CENA_OD`), KEY `CENA_DO` (`CENA_DO`), KEY `KOD` (`KOD`), KEY `stage` (`stage`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 And also selecting all loan types and later filtering them trough php doesnt work good, since each type has over 50k records and the select takes too much time as well... Any ides about improving the speed are appreciated.

    Read the article

  • Dynamically adding radio buttons using JQUERY and then hooking up the jquery change event to the gen

    - by Barry
    i am adding collection of radio buttons to my page using jquery below $(document).ready(function() { $("#Search").click(function() { var keyword = $('#keyWord').val(); var EntityType = $("#lstEntityTypes :selected").text(); var postData = { type: EntityType, keyWord: keyword }; // alert(postData.VehicleType); $.post('/EntityLink/GetJsonEntitySearchResults', postData, function(GRdata) { var grid = '<table><tr><td>ID</td><td>Name</td><td></td>'; for (var i = 0; i < GRdata.length; i++) { grid += '<tr><td>'; grid += GRdata[i].ID; grid += '</td><td>'; grid += GRdata[i].EntityName; grid += '</td><td>'; grid += '<input type="radio" name="EntitiesRadio" value="' + GRdata[i].ID + '" />'; grid += '</td></tr>'; } grid += '</table>'; alert(grid); $("#EntitySearchResults").html(grid); $("EntitiesRadio").change(function() { alert($("EntitiesRadio :checked").val()); $("EntityID").val($("EntitiesRadio :checked").val()); alert($("EntityID").val()); $("EntityName").val($("#lstEntityTypes :selected").text()); }); }); }); // }); so when page loads there is not EntitiesRadio name range, so i tried to register the entitiesRadio change function inside the same search click method but it isnt registering. how do i get the change event to fire to update my hidden inputs

    Read the article

  • Get the equivalent time between "dynamic" time zones

    - by doctore
    I have a table providers that has three columns (containing more columns but not important in this case): starttime, start time in which you can contact him. endtime, final hour in which you can contact him. region_id, region where the provider resides. In USA: California, Texas, etc. In UK: England, Scotland, etc starttime and endtime are time without timezone columns, but, "indirectly", their value has time zone of the region in which the provider resides. For example: starttime | endtime | region_id (time zone of region) | "real" st | "real" et ----------|----------|---------------------------------|-----------|----------- 03:00:00 | 17:00:00 | 1 (EGT => -1) | 02:00:00 | 16:00:00 Often I need to get the list of suppliers whose time range is within the current server time (taking into account the time zone conversion). The problem is that the time zones aren't "constant", ie, they may change during the summer time. However, this change is very specific to the region and not always carried out at the same time: EGT <= EGST, ART <= ARST, etc. The question is: 1. Is it necessary to use a webservice to update every so often the time zones in the regions? Does anyone know of a web service that can serve? 2. Is there a better approach to solve this problem? Thanks in advance. UPDATE I will give an example to clarify what I'm trying to get. In the table providers I found this records: idproviders | starttime | endtime | region_id ------------|-----------|----------|----------- 1 | 03:00:00 | 17:00:00 | 23 (Texas) 2 | 04:00:00 | 18:00:00 | 23 (Texas) If I execute the query in January, with this information: Server time (UTC offset) = 0 hours Texas providers (UTC offset) = +1 hour Server time = 02:00:00 I should get the following results: idproviders = 1 If I execute the query in June, with this information: Server time (UTC offset) = 0 hours Texas providers (UTC offset) = +2 hours (their local time has not changed, but their time zone has changed) Server time = 02:00:00 I should get the following results: idproviders = 1 and 2

    Read the article

  • Plotting an Arc in Discrete Steps

    - by phobos51594
    Good afternoon, Background My question relates to the plotting of an arbitrary arc in space using discrete steps. It is unique, however, in that I am not drawing to a canvas in the typical sense. The firmware I am designing is for a gcode interpreter for a CNC mill that will translate commands into stepper motor movements. Now, I have already found a similar question on this very site, but the methodology suggested (Bresenham's Algorithm) appears to be incompatable for moving an object in space, as it only relies on the calculation of one octant of a circle which is then mirrored about the remaining axes of symmetry. Furthermore, the prescribed method of calculation an arc between two arbitrary angles relies on trigonometry (I am implementing on a microcontroller and would like to avoid costly trig functions, if possible) and simply not taking the steps that are out of the range. Finally, the algorithm only is designed to work in one rotational direction (e.g. counterclockwise). Question So, on to the actual question: Does anyone know of a general-purpose algorithm that can be used to "draw" an arbitrary arc in discrete steps while still giving respect to angular direction (CW / CCW)? The final implementation will be done in C, but the language for the purpose of the question is irrelevant. Thank you in advance. References S.O post on drawing a simple circle using Bresenham's Algorithm: "Drawing" an arc in discrete x-y steps Wiki page describing Bresenham's Algorithm for a circle http://en.wikipedia.org/wiki/Midpoint_circle_algorithm Gcode instructions to be implemented (see. G2 and G3) http://linuxcnc.org/docs/html/gcode.html

    Read the article

  • A standard set of questions to ask an interviewer?

    - by Rob Wells
    We have had many questions for interviewers to ask interviewees. But none addressing information flow in the other direction, interviewee to interviewer. Just an indirect question about "deal breakers" and one about "finding dream jobs". What I'm after is when you're interviewing at a company do you have a set of questions that you like to ask to help get a feel for the company and the work environment? I have a series of questions that I like to ask that range from the development environment to testing techniques to how the team get on together. Anything else you'd like to ask? Edit: I moved my original list of interviewer questions to my answer below. I've also gone through the other answers and added the ones thought were useful in to that answer. The answer is community wiki so feel free to add anything useful. N.B. This is my first cut of categories. Feel free to modify/add/etc. the categories. Or to recategorise the questions themselves.

    Read the article

  • Go - Using a map for its set properties with user defined types

    - by Seth Hoenig
    I'm trying to use the built-in map type as a set for a type of my own (Point, in this case). The problem is, when I assign a Point to the map, and then later create a new, but equal point and use it as a key, the map behaves as though that key is not in the map. Is this not possible to do? // maptest.go package main import "fmt" func main() { set := make(map[*Point]bool) printSet(set) set[NewPoint(0, 0)] = true printSet(set) set[NewPoint(0, 2)] = true printSet(set) _, ok := set[NewPoint(3, 3)] // not in map if !ok { fmt.Print("correct error code for non existent element\n") } else { fmt.Print("incorrect error code for non existent element\n") } c, ok := set[NewPoint(0, 2)] // another one just like it already in map if ok { fmt.Print("correct error code for existent element\n") // should get this } else { fmt.Print("incorrect error code for existent element\n") // get this } fmt.Printf("c: %t\n", c) } func printSet(stuff map[*Point]bool) { fmt.Print("Set:\n") for k, v := range stuff { fmt.Printf("%s: %t\n", k, v) } } type Point struct { row int col int } func NewPoint(r, c int) *Point { return &Point{r, c} } func (p *Point) String() string { return fmt.Sprintf("{%d, %d}", p.row, p.col) } func (p *Point) Eq(o *Point) bool { return p.row == o.row && p.col == o.col }

    Read the article

  • Get a selected radio button value after POST to set other fields enabled/disabled

    - by Redeemed1
    I have an MVC application with a simple control to all selection of All Dates or selecting a Date Range. The radio buttons have an onclick handler to enable/disable the dat pickers. All work well so far. When I try to set the correct context state for the datepickers after doing a POST I cannot get the jQuery selector to return the radio buttons checked value. The code is as follows: <%= Html.RadioButton("DateSelection.AllDates", "AllDates", Model.AllDates == "AllDates", new { onclick = "setReadOnly(this);" })%>ALL Dates&nbsp; <%= Html.RadioButton("DateSelection.AllDates", "Selection", Model.AllDates == "Selection", new { onclick = "setReadOnly(this);" })%>Selection <%= Html.DatePicker("DateSelection.startdate", Model.StartDate, "", "") %> &nbsp;To&nbsp;<%= Html.DatePicker("DateSelection.enddate", Model.EndDate, "", "") %><br /> The javascript is as follows: <script type="text/jscript" > function setReadOnly(obj) { if (obj.value == "Selection") { $('#DateSelection_startdate').css('backgroundColor', '#ffffff') .removeAttr('readonly') .datepicker('enable'); $('#DateSelection_enddate').css('backgroundColor', '#ffffff') .removeAttr('readonly') .datepicker('enable'); } else { $('#DateSelection_startdate').css('backgroundColor', '#eeeeee') .attr('readonly', 'readonly') .val('') .datepicker('disable'); $('#DateSelection_enddate').css('backgroundColor', '#eeeeee') .attr('readonly', 'readonly') .val('') .datepicker('disable'); } } <script type="text/jscript"> $(document).ready(function() { $('#DateSelection_startdate').datepicker('disable').css('backgroundColor', '#eeeeee') .attr('readonly', 'readonly') .val(''); $('#DateSelection_enddate').datepicker('disable').css('backgroundColor', '#eeeeee') .attr('readonly', 'readonly') .val(''); var selected = $('#DateSelection_AllDates:checked'); setReadOnly(selected); }); The javascript line that is causing the problem is var selected = $('#DateSelection_AllDates:checked'); which will NOT return the checked radio button. Using var selected = $('#DateSelection_AllDates'); will return the first radio button value as expected i.e. applying the ':checked' filter ALWAYS returns undefined. Can anyone see anything wrong here?

    Read the article

  • How to perform Rails model validation checks within model but outside of filters using ledermann-rails-settings and extensions

    - by user1277160
    Background I'm using ledermann-rails-settings (https://github.com/ledermann/rails-settings) on a Rails 2/3 project to extend virtually the model with certain attributes that don't necessarily need to be placed into the DB in a wide table and it's working out swimmingly for our needs. An additional reason I chose this Gem is because of the post How to create a form for the rails-settings plugin which ties ledermann-rails-settings more closely to the model for the purpose of clean form_for usage for administrator GUI support. It's a perfect solution for addressing form_for support although... Something that I'm running into now though is properly validating the dynamic getters/setters before being passed to the ledermann-rails-settings module. At the moment they are saved immediately, regardless if the model validation has actually fired - I can see through script/console that validation errors are being raised. Example For instance I would like to validate that the attribute :foo is within the range of 0..100 for decimal usage (or even a regex). I've found that with the previous post that I can use standard Rails validators (surprise, surprise) but I want to halt on actually saving any values until those are addressed - ensure that the user of the GUI has given 61.43 as a numerical value. The following code has been borrowed from the quoted post. class User < ActiveRecord::Base has_settings validates_inclusion_of :foo, :in => 0..100 def self.settings_attr_accessor(*args) >>SOME SORT OF UNLESS MODEL.VALID? CHECK HERE args.each do |method_name| eval " def #{method_name} self.settings.send(:#{method_name}) end def #{method_name}=(value) self.settings.send(:#{method_name}=, value) end " end >>END UNLESS end settings_attr_accessor :foo end Anyone have any thoughts here on pulling the state of the model at this point outside of having to put this into a before filter? The goal here is to be able to use the standard validations and avoid rolling custom validation checks for each new settings_attr_accessor that is added. Thanks!

    Read the article

  • How to make std::vector's operator[] compile doing bounds checking in DEBUG but not in RELEASE

    - by Edison Gustavo Muenz
    I'm using Visual Studio 2008. I'm aware that std::vector has bounds checking with the at() function and has undefined behaviour if you try to access something using the operator [] incorrectly (out of range). I'm curious if it's possible to compile my program with the bounds checking. This way the operator[] would use the at() function and throw a std::out_of_range whenever something is out of bounds. The release mode would be compiled without bounds checking for operator[], so the performance doesn't degrade. I came into thinking about this because I'm migrating an app that was written using Borland C++ to Visual Studio and in a small part of the code I have this (with i=0, j=1): v[i][j]; //v is a std::vector<std::vector<int> > The size of the vector 'v' is [0][1] (so element 0 of the vector has only one element). This is undefined behaviour, I know, but Borland is returning 0 here, VS is crashing. I like the crash better than returning 0, so if I can get more 'crashes' by the std::out_of_range exception being thrown, the migration would be completed faster (so it would expose more bugs that Borland was hiding).

    Read the article

  • How to move point on arc?

    - by bbZ
    I am writing an app that is simulating RobotArm movement. What I want to achieve, and where I have couple of problems is moving a Point on arc (180degree) that is arm range of movement. I am moving an arm by grabbing with mouse end of arm (Elbow, the Point I was talking about), robot can have multiple arms with diffrent arm lenghts. If u can help me with this part, I'd be grateful. This is what I have so far, drawing function: public void draw(Graphics graph) { Graphics2D g2d = (Graphics2D) graph.create(); graph.setColor(color); graph.fillOval(location.x - 4, location.y - 4, point.width, point.height); //Draws elbow if (parentLocation != null) { graph.setColor(Color.black); graph.drawLine(location.x, location.y, parentLocation.x, parentLocation.y); //Connects to parent if (arc == null) { angle = new Double(90 - getAngle(parentInitLocation)); arc = new Arc2D.Double(parentLocation.x - (parentDistance * 2 / 2), parentLocation.y - (parentDistance * 2 / 2), parentDistance * 2, parentDistance * 2, 90 - getAngle(parentInitLocation), 180, Arc2D.OPEN); //Draws an arc if not drawed yet. } else if (angle != null) //if parent is moved, angle is moved also { arc = new Arc2D.Double(parentLocation.x - (parentDistance * 2 / 2), parentLocation.y - (parentDistance * 2 / 2), parentDistance * 2, parentDistance * 2, angle, 180, Arc2D.OPEN); } g2d.draw(arc); } if (spacePanel.getElbows().size() > level + 1) {//updates all childElbows position updateChild(graph); } } I just do not know how to prevent moving Point moving outside of arc line. It can not be inside or outside arc, just on it. Here I wanted to put a screenshot, sadly I don't have enough rep. Am I allowed to put link to this? Maybe you got other ways how to achieve this kind of thing. Here is the image: Red circle is actual state, and green one is what I want to do. EDIT2: As requested, repo link: https://github.com/dspoko/RobotArm

    Read the article

  • Trying to calculate large numbers in Python with gmpy. Python keeps crashing?

    - by Ryan Peschel
    I was recommended to use gmpy to assist with calculating large numbers efficiently. Before I was just using python and my script ran for a day or two and then ran out of memory (not sure how that happened because my program's memory usage should basically be constant throughout.. maybe a memory leak?) Anyways, I keep getting this weird error after running my program for a couple seconds: mp_allocate< 545275904->545275904 > Fatal Python error: mp_allocate failure This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. Also, python crashes and Windows 7 gives me the generic python.exe has stopped working dialog. This wasn't happening with using standard python integers. Now that I switch to gmpy I am getting this error just seconds in to running my script. I thought gmpy was specialized in dealing with large number arithmetic? For reference, here is a sample program that produces the error: import gmpy2 p = gmpy2.xmpz(3000000000) s = gmpy2.xmpz(2) M = s**p for x in range(p): s = (s * s) % M I have 10 gigs of RAM and without gmpy this script ran for days without running out of memory (still not sure how that happened considering s never really gets larger.. Anyone have any ideas? EDIT: Forgot to mention I am using Python 3.2

    Read the article

  • Lookup table size reduction

    - by Ryan
    Hello: I have an application in which I have to store a couple of millions of integers, I have to store them in a Look up table, obviously I cannot store such amount of data in memory and in my requirements I am very limited I have to store the data in an embebedded system so I am very limited in the space, so I would like to ask you about recommended methods that I can use for the reduction of the look up table. I cannot use function approximation such as neural networks, the values needs to be in a table. The range of the integers is not known at the moment. When I say integers I mean a 32 bit value. Basically the idea is use some copmpression method to reduce the amount of memory but without losing many precision. This thing needs to run in hardware so the computation overhead cannot be very high. In my algorithm I have to access to one value of the table do some operations with it and after update the value. In the end what I should have is a function which I pass an index to it and then I get a value, and after I have to use another function to write a value in the table. I found one called tile coding http://www.cs.ualberta.ca/~sutton/book/8/node6.html, this one is based on several look up tables, does anyone know any other method?. Thanks.

    Read the article

  • What are the fastest-performing options for a read-only, unordered collection of unique strings?

    - by Dan Tao
    Disclaimer: I realize the totally obvious answer to this question is HashSet<string>. It is absurdly fast, it is unordered, and its values are unique. But I'm just wondering, because HashSet<T> is a mutable class, so it has Add, Remove, etc.; and so I am not sure if the underlying data structure that makes these operations possible makes certain performance sacrifices when it comes to read operations -- in particular, I'm concerned with Contains. Basically, I'm wondering what are the absolute fastest-performing data structures in existence that can supply a Contains method for objects of type string. Within or outside of the .NET framework itself. I'm interested in all kinds of answers, regardless of their limitations. For example I can imagine that some structure might be restricted to strings of a certain length, or may be optimized depending on the problem domain (e.g., range of possible input values), etc. If it exists, I want to hear about it. One last thing: I'm not restricting this to read-only data structures. Obviously any read-write data structure could be embedded inside a read-only wrapper. The only reason I even mentioned the word "read-only" is that I don't have any requirement for a data structure to allow adding, removing, etc. If it has those functions, though, I won't complain.

    Read the article

  • MySQL query does not return any data

    - by Alex L
    Hi, I need to retrieve data from a specific time period. The query works fine until I specify the time period. Is there something wrong with the way I specify time period? I know there are many entries within that time-frame. This query returns empty: SELECT stop_times.stop_id, STR_TO_DATE(stop_times.arrival_time, '%H:%i:%s') as stopTime, routes.route_short_name, routes.route_long_name, trips.trip_headsign FROM trips JOIN stop_times ON trips.trip_id = stop_times.trip_id JOIN routes ON routes.route_id = trips.route_id WHERE stop_times.stop_id = 5508 HAVING stopTime BETWEEN DATE_SUB(stopTime,INTERVAL 1 MINUTE) AND DATE_ADD(stopTime,INTERVAL 20 MINUTE); Here is it's EXPLAIN: +----+-------------+------------+--------+------------------+---------+---------+-------------------------------+------+-------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+------------+--------+------------------+---------+---------+-------------------------------+------+-------------+ | 1 | SIMPLE | stop_times | ref | trip_id,stop_id | stop_id | 5 | const | 605 | Using where | | 1 | SIMPLE | trips | eq_ref | PRIMARY,route_id | PRIMARY | 4 | wmata_gtfs.stop_times.trip_id | 1 | | | 1 | SIMPLE | routes | eq_ref | PRIMARY | PRIMARY | 4 | wmata_gtfs.trips.route_id | 1 | | +----+-------------+------------+--------+------------------+---------+---------+-------------------------------+------+-------------+ 3 rows in set (0.00 sec) The query works if I remove the HAVING clause (don't specify time range). Returns: +---------+----------+------------------+-----------------+---------------+ | stop_id | stopTime | route_short_name | route_long_name | trip_headsign | +---------+----------+------------------+-----------------+---------------+ | 5508 | 06:31:00 | "80" | "" | "FORT TOTTEN" | | 5508 | 06:57:00 | "80" | "" | "FORT TOTTEN" | | 5508 | 07:23:00 | "80" | "" | "FORT TOTTEN" | | 5508 | 07:49:00 | "80" | "" | "FORT TOTTEN" | | 5508 | 08:15:00 | "80" | "" | "FORT TOTTEN" | | 5508 | 08:41:00 | "80" | "" | "FORT TOTTEN" | | 5508 | 09:08:00 | "80" | "" | "FORT TOTTEN" | I am using Google Transit format Data loaded into MySQL. The query is supposed to provide stop times and bus routes for a given bus stop. For a bus stop, I am trying to get: Route Name Bus Name Bus Direction (headsign) Stop time The results should be limited only to buses times from 1 min ago to 20 min from now. Please let me know if you could help.

    Read the article

  • Possibility of a custom Contacts field with a set list of values and Contacts lookup performance

    - by areyling
    I'm pretty sure it's not viable to do what I'd like to based on some initial research, but I figured it couldn't hurt to ask the community of experts here in case someone knows a way. I'd like to create a custom field for contacts that the user is able to edit from the main Contacts app; however, the user should only be allowed to select from a list of four specific values. A short list of string values would be ideal, but an int with a min/max range would suffice. I'm interested in knowing if it's possible either way, but also wondering if it make sense to go this route performance wise. More specifically, would it be better to look up a contact (based on a phone number) each time a call or SMS message is received or better to store my own set of data (consisting of name, numbers, and the custom field) and just syncing contact info in a thread every so often? Or syncing contacts the first time the app is run and then registering for changes using ContentObserver? Here is a similar question with an answer that explains how to add a custom field to a contact. Thanks in advance.

    Read the article

  • What's the most efficient query?

    - by Aaron Carlino
    I have a table named Projects that has the following relationships: has many Contributions has many Payments In my result set, I need the following aggregate values: Number of unique contributors (DonorID on the Contribution table) Total contributed (SUM of Amount on Contribution table) Total paid (SUM of PaymentAmount on Payment table) Because there are so many aggregate functions and multiple joins, it gets messy do use standard aggregate functions the the GROUP BY clause. I also need the ability to sort and filter these fields. So I've come up with two options: Using subqueries: SELECT Project.ID AS PROJECT_ID, (SELECT SUM(PaymentAmount) FROM Payment WHERE ProjectID = PROJECT_ID) AS TotalPaidBack, (SELECT COUNT(DISTINCT DonorID) FROM Contribution WHERE RecipientID = PROJECT_ID) AS ContributorCount, (SELECT SUM(Amount) FROM Contribution WHERE RecipientID = PROJECT_ID) AS TotalReceived FROM Project; Using a temporary table: DROP TABLE IF EXISTS Project_Temp; CREATE TEMPORARY TABLE Project_Temp (project_id INT NOT NULL, total_payments INT, total_donors INT, total_received INT, PRIMARY KEY(project_id)) ENGINE=MEMORY; INSERT INTO Project_Temp (project_id,total_payments) SELECT `Project`.ID, IFNULL(SUM(PaymentAmount),0) FROM `Project` LEFT JOIN `Payment` ON ProjectID = `Project`.ID GROUP BY 1; INSERT INTO Project_Temp (project_id,total_donors,total_received) SELECT `Project`.ID, IFNULL(COUNT(DISTINCT DonorID),0), IFNULL(SUM(Amount),0) FROM `Project` LEFT JOIN `Contribution` ON RecipientID = `Project`.ID GROUP BY 1 ON DUPLICATE KEY UPDATE total_donors = VALUES(total_donors), total_received = VALUES(total_received); SELECT * FROM Project_Temp; Tests for both are pretty comparable, in the 0.7 - 0.8 seconds range with 1,000 rows. But I'm really concerned about scalability, and I don't want to have to re-engineer everything as my tables grow. What's the best approach?

    Read the article

  • Segmenting and masking all shades of red from an image using opencv

    - by vrinda
    I am trying to segment all shades of red form an image using hue saturation values and use InRangeS function to create a mask which should have all red areas whitened and all others blacked(a new 1 channel image). Thwn Inpaint them to kind of obscure the segmented portions. My code is as given. However I am unable to get an output image, it doesnt segment the desired color range. Any pointers on my approach and why it isnt working. ? using namespace std; int main() { IplImage *img1=cvLoadImage("/home/techrascal/projects/test1/image2.jpeg"); //IplImage *img3; IplImage *imghsv; IplImage *img4; CvSize sz=cvGetSize(img1); imghsv=cvCreateImage(sz,IPL_DEPTH_8U,3); img4=cvCreateImage(sz,IPL_DEPTH_8U,1); int width = img1->width; int height = img1->height; int bpp = img1->nChannels; cvNamedWindow("original", 1); cvNamedWindow("hsv",1); cvNamedWindow("Blurred",1); int r,g,b; // create inpaint mask: img 4 will behave as mask cvCvtColor(img1,imghsv,CV_BGR2HSV); CvScalar hsv_min = cvScalar(0, 0, 0, 0); CvScalar hsv_max = cvScalar(255, 0, 0, 0); //cvShowImage("hsv",imghsv); cvInRangeS( imghsv, hsv_min, hsv_max, img4 ); cvInpaint(img1, img4, img1, 3,CV_INPAINT_NS ); cvShowImage("Blurred",img1); cvReleaseImage(&img1); cvReleaseImage(&imghsv); cvReleaseImage(&img4); //cvReleaseImage(&img3); char d=cvWaitKey(10000); cvDestroyAllWindows(); return 0;}

    Read the article

  • Accept templated parameter of stl_container_type<string>::iterator

    - by Rodion Ingles
    I have a function where I have a container which holds strings (eg vector<string>, set<string>, list<string>) and, given a start iterator and an end iterator, go through the iterator range processing the strings. Currently the function is declared like this: template< typename ContainerIter> void ProcessStrings(ContainerIter begin, ContainerIter end); Now this will accept any type which conforms to the implicit interface of implementing operator*, prefix operator++ and whatever other calls are in the function body. What I really want to do is have a definition like the one below which explicitly restricts the amount of input (pseudocode warning): template< typename Container<string>::iterator> void ProcessStrings(Container<string>::iterator begin, Container<string>::iterator end); so that I can use it as such: vector<string> str_vec; list<string> str_list; set<SomeOtherClass> so_set; ProcessStrings(str_vec.begin(), str_vec.end()); // OK ProcessStrings(str_list.begin(), str_list.end()); //OK ProcessStrings(so_set.begin(), so_set.end()); // Error Essentially, what I am trying to do is restrict the function specification to make it obvious to a user of the function what it accepts and if the code fails to compile they get a message that they are using the wrong parameter types rather than something in the function body that XXX function could not be found for XXX class.

    Read the article

  • JavaME - LWUIT images eat up all the memory

    - by Marko
    Hi, I'm writing a MIDlet using LWUIT and images seem to eat up incredible amounts of memory. All the images I use are PNGs and are packed inside the JAR file. I load them using the standard Image.createImage(URL) method. The application has a number of forms and each has a couple of labels an buttons, however I am fairly certain that only the active form is kept in memory (I know it isn't very trustworthy, but Runtime.freeMemory() seems to confirm this). The application has worked well in 240x320 resolution, but moving it to 480x640 and using appropriately larger images for UI started causing out of memory errors to show up. What the application does, among other things, is download remote images. The application seems to work fine until it gets to this point. After downloading a couple of PNGs and returning to the main menu, the out of memory error is encountered. Naturally, I looked into the amount of memory the main menu uses and it was pretty shocking. It's just two labels with images and four buttons. Each button has three images used for style.setIcon, setPressedIcon and setRolloverIcon. Images range in size from 15 to 25KB but removing two of the three images used for every button (so 8 images in total), Runtime.freeMemory() showed a stunning 1MB decrease in memory usage. The way I see it, I either have a whole lot of memory leaks (which I don't think I do, but memory leaks aren't exactly known to be easily tracked down), I am doing something terribly wrong with image handling or there's really no problem involved and I just need to scale down. If anyone has any insight to offer, I would greatly appreciate it.

    Read the article

  • Python: For loop problem

    - by James
    I have a PSP page with html embedded. I need to place another for loop so i can insert another %s next to background-color: which will instert a appropriate colour to colour in the html table. For example i need to insert for z in colours so it can loop over the colours list and insert the correct colour. Where ever i try to insert the for loop it doesnt seem to work it most commonly colours each cell in the table 60 times then moves onto the next cell and repeats itself and crashes my web browser. The colours are held in a table called colours. code below: <table> <% s = ''.join(aa[i] for i in table if i in aa) for i in range(0, len(s), 60): req.write('<tr><td><TT>%04d</td>' % (i+1)); for k in s[i:i+60]: req.write('<TT><td><TT><font style="background-color:">%s<font></td>' % (k)); req.write('</TT></tr>') #end %> </table>

    Read the article

  • Help ! How do I get the total number rows from my SQL Server paging procedure ?

    - by The_AlienCoder
    Ok I have a table in my SQL Server database that stores comments. My desire is to be able to page though the records using [Back],[Next], page numbers & [Last] buttons in my data list. I figured the most efficient way was to use a stored procedure that only returns a certain number of rows within a particular range. Here is what I came up with @PageIndex INT, @PageSize INT, @postid int AS SET NOCOUNT ON begin WITH tmp AS ( SELECT comments.*, ROW_NUMBER() OVER (ORDER BY dateposted ASC) AS Row FROM comments WHERE (comments.postid = @postid)) SELECT tmp.* FROM tmp WHERE Row between (@PageIndex - 1) * @PageSize + 1 and @PageIndex*@PageSize end RETURN Now everything works fine and I have been able implement [Next] and [Back] buttons in my data list pager. Now I need the total number of all comments (not in the current page) so that I can implement my page numbers and the[Last] button on my pager. In other words I want to return the total number of rows in my first select statement i.e WITH tmp AS ( SELECT comments.*, ROW_NUMBER() OVER (ORDER BY dateposted ASC) AS Row FROM comments WHERE (comments.postid = @postid)) set @TotalRows = @@rowcount @@rowcount doesn't work and raises an error. I also cant get count.* to work either. Is there another way to get the total amount of rows or is my approach doomed.

    Read the article

  • Turning PHP page calling Zend functions procedurally into Zend Framework MVC-help!

    - by Joel
    Hi guys, I posted much of this question, but if didn't include all the Zend stuff because I thought it'd be overkill, but now I'm thinking it's not easy to figure out an OO way of doing this without that code... So with that said, please forgive the verbose code. I'm learning how to use MVC and OO in general, and I have a website that is all in PHP but most of the pages are basic static pages. I have already converted them all to views in Zend Framework, and have the Controller and layout set. All is good there. The one remaining page I have is the main reason I did this...it in fact uses Zend library (for gData connection and pulling info from a Google Calendar and displaying it on the page. I don't know enough about this to know where to begin to refactor the code to fit in the Zend Framework MVC model. Any help would be greatly appreciated!! .phtml view page: <div id="dhtmltooltip" align="left"></div> <script src="../js/tooltip.js" type="text/javascript"> </script> <div id="container"> <div id="conten"> <a name="C4"></a> <?php function get_desc_second_part(&$value) { list(,$val_b) = explode('==',$value); $value = trim($val_b); } function filterEventDetails($contentText) { $data = array(); foreach($contentText as $row) { if(strstr($row, 'When: ')) { ##cleaning "when" string to get date in the format "May 28, 2009"## $data['duration'] = str_replace('When: ','',$row); list($when, ) = explode(' to ',$data['duration']); $data['when'] = substr($when,4); if(strlen($data['when'])>13) $data['when'] = trim(str_replace(strrchr($data['when'], ' '),'',$data['when'])); $data['duration'] = substr($data['duration'], 0, strlen($data['duration'])-4); //trimming time zone identifier (UTC etc.) } if(strstr($row, 'Where: ')) { $data['where'] = str_replace('Where: ','',$row); //pr($row); //$where = strstr($row, 'Where: '); //pr($where); } if(strstr($row, 'Event Description: ')) { $event_desc = str_replace('Event Description: ','',$row); //$event_desc = strstr($row, 'Event Description: '); ## Filtering event description and extracting venue, ticket urls etc from it. //$event_desc = str_replace('Event Description: ','',$contentText[3]); $event_desc_array = explode('|',$event_desc); array_walk($event_desc_array,'get_desc_second_part'); //pr($event_desc_array); $data['venue_url'] = $event_desc_array[0]; $data['details'] = $event_desc_array[1]; $data['tickets_url'] = $event_desc_array[2]; $data['tickets_button'] = $event_desc_array[3]; $data['facebook_url'] = $event_desc_array[4]; $data['facebook_icon'] = $event_desc_array[5]; } } return $data; } // load library require_once 'Zend/Loader.php'; Zend_Loader::loadClass('Zend_Gdata'); Zend_Loader::loadClass('Zend_Gdata_ClientLogin'); Zend_Loader::loadClass('Zend_Gdata_Calendar'); Zend_Loader::loadClass('Zend_Http_Client'); // create authenticated HTTP client for Calendar service $gcal = Zend_Gdata_Calendar::AUTH_SERVICE_NAME; $user = "[email protected]"; $pass = "xxxxxxxx"; $client = Zend_Gdata_ClientLogin::getHttpClient($user, $pass, $gcal); $gcal = new Zend_Gdata_Calendar($client); $query = $gcal->newEventQuery(); $query->setUser('[email protected]'); $secondary=true; $query->setVisibility('private'); $query->setProjection('basic'); $query->setOrderby('starttime'); $query->setSortOrder('ascending'); //$query->setFutureevents('true'); $startDate=date('Y-m-d h:i:s'); $endDate="2015-12-31"; $query->setStartMin($startDate); $query->setStartMax($endDate); $query->setMaxResults(30); try { $feed = $gcal->getCalendarEventFeed($query); } catch (Zend_Gdata_App_Exception $e) { echo "Error: " . $e->getResponse(); } ?> <h1><?php echo $feed->title; ?></h1> <?php echo $feed->totalResults; ?> event(s) found. <table width="90%" border="3" align="center"> <tr> <td width="20%" align="center" valign="middle"><b>;DATE</b></td> <td width="25%" align="center" valign="middle"><b>VENUE</b></td> <td width="20%" align="center" valign="middle"><b>CITY</b></td> <td width="20%" align="center" valign="middle"><b>DETAILS</b></td> <td width="15%" align="center" valign="middle"><b>LINKS</b></td> </tr> <?php if((int)$feed->totalResults>0) { //checking if at least one event is there in this date range foreach ($feed as $event) { //iterating through all events //pr($event);die; $contentText = stripslashes($event->content->text); //striping any escape character $contentText = preg_replace('/\<br \/\>[\n\t\s]{1,}\<br \/\>/','<br />',stripslashes($event->content->text)); //replacing multiple breaks with a single break //die(); $contentText = explode('<br />',$contentText); //splitting data by break tag $eventData = filterEventDetails($contentText); $when = $eventData['when']; $where = $eventData['where']; $duration = $eventData['duration']; $venue_url = $eventData['venue_url']; $details = $eventData['details']; $tickets_url = $eventData['tickets_url']; $tickets_button = $eventData['tickets_button']; $facebook_url = $eventData['facebook_url']; $facebook_icon = $eventData['facebook_icon']; $title = stripslashes($event->title); echo '<tr>'; echo '<td width="20%" align="center" valign="middle" nowrap="nowrap">'; echo $when; echo '</td>'; echo '<td width="20%" align="center" valign="middle">'; if($venue_url!='') { echo '<a href="'.$venue_url.'" target="_blank">'.$title.'</a>'; } else { echo $title; } echo '</td>'; echo '<td width="20%" align="center" valign="middle">'; echo $where; echo '</td>'; echo '<td width="20%" align="center" valign="middle">'; $details = str_replace("\n","<br>",htmlentities($details)); $duration = str_replace("\n","<br>",$duration); $detailed_description = "<b>When</b>: <br>".$duration."<br><br>"; $detailed_description .= "<b>Description</b>: <br>".$details; echo '<a href="javascript:void(0);" onmouseover="ddrivetip(\''.$detailed_description.'\')" onmouseout="hideddrivetip()" onclick="return false">View Details</a>'; echo '</td>'; echo '<td width="20%" valign="middle">'; if(trim($tickets_url) !='' && trim($tickets_button)!='') { echo '<a href="'.$tickets_url.'" target="_blank"><img src="'.$tickets_button.'" border="0" ></a>'; } if(trim($facebook_url) !='' && trim($facebook_icon)!='') { echo '<a href="'.$facebook_url.'" target="_blank"><img src="'.$facebook_icon.'" border="0" ></a>'; } else { echo '......'; } echo '</td>'; echo '</tr>'; } } else { //else show 'no event found' message echo '<tr>'; echo '<td width="100%" align="center" valign="middle" colspan="5">'; echo "No event found"; echo '</td>'; } ?> </table> <h3><a href="#pastevents">Scroll down for a list of past shows.</a></h3> <br /> <a name="pastevents"></a> <ul class="pastShows"> <?php $startDate='2005-01-01'; $endDate=date('Y-m-d'); /*$gcal = Zend_Gdata_Calendar::AUTH_SERVICE_NAME; $user = "[email protected]"; $pass = "silverroof10"; $client = Zend_Gdata_ClientLogin::getHttpClient($user, $pass, $gcal); $gcal = new Zend_Gdata_Calendar($client); $query = $gcal->newEventQuery(); $query->setUser('[email protected]'); $query->setVisibility('private'); $query->setProjection('basic');*/ $query->setOrderby('starttime'); $query->setSortOrder('descending'); $query->setFutureevents('false'); $query->setStartMin($startDate); $query->setStartMax($endDate); $query->setMaxResults(1000); try { $feed = $gcal->getCalendarEventFeed($query); } catch (Zend_Gdata_App_Exception $e) { echo "Error: " . $e->getResponse(); } if((int)$feed->totalResults>0) { //checking if at least one event is there in this date range foreach ($feed as $event) { //iterating through all events $contentText = stripslashes($event->content->text); //striping any escape character $contentText = preg_replace('/\<br \/\>[\n\t\s]{1,}\<br \/\>/','<br />',stripslashes($event->content->text)); //replacing multiple breaks with a single break $contentText = explode('<br />',$contentText); //splitting data by break tag $eventData = filterEventDetails($contentText); $when = $eventData['when']; $where = $eventData['where']; $duration = $eventData['duration']; $title = stripslashes($event->title); echo '<li class="pastShows">' . $when . " - " . $title . ", " . $where . '</li>'; } } ?> </div> </div>

    Read the article

  • Trying to output a list using class

    - by captain morgan
    Am trying to get the moving average of a price..but i keep getting an attribute error in my Moving_Average class. ('Moving_Average' object has no attribute 'days'). Here is what I have: class Moving_Average: def calculation(self, alist:list,days:int): m = self.days prices = alist[1::2] average = [0]* len(prices) signal = ['']* len(prices) for m in range(0,len(prices)-days+1): average[m+2] = sum(prices[m:m+days])/days if prices[m+2] < average[m+2]: signal[m+2]='SELL' elif prices[m+2] > average[m+2] and prices[m+1] < average[m+1]: signal[m+2]='BUY' else: signal[m+2] ='' return average,signal def print_report(symbol:str,strategy:str): print('SYMBOL: ', symbol) print('STRATEGY: ', strategy) print('Date Closing Strategy Signal') def user(): strategy = ''' Which of the following strategy would you like to use? * Simple Moving Average [S] * Directional Indicator[D] Please enter your choice: ''' if signal_strategy in 'Ss': days = input('Please enter the number of days for the average') days = int(days) strategy = 'Simple Moving Average {}-days'.format(str(days)) m = Moving_Average() ma = m.calculation(gg, days) print(ma) gg is an list that contains date and prices. [2013-10-01,60,2013-10-02,60] The output is supposed to look like: Date Price Average Signal 2013-10-01 60.0 2013-10-02 60.0 60.00 BUY

    Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >