Search Results

Search found 9557 results on 383 pages for 'x86 64'.

Page 167/383 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Ubuntu 12.04, can't find my home wifi network

  - by Anton

  I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

  Read the article

• Google Chrome would not exist fullscreen mode

  - by siberan

  I am running 64-bit Ubuntu 13.10, have latest stable google-chrome version 30.0.1599.114-1. Whenever I enter fullscreen mode by pressing F11, it would never exit this mode by pressing F11. Actually, I see it exit but then fullscreen mode is quickly restored. I searched for a solution, but nothing really helps. I even tried completely re-installing it with no luck. Any suggestions? Update: I tried completely removing ~/.config/google-chrome, it did not help. Update 2: I am running Cinnamon 2.0.6, maybe that would give some clues. Thanks, Nick.

  Read the article

• Infrared usb adapter not hot pluggable?

  - by A. Goossens

  For transferring exercise files from my Polar heart rate monitor i use the software Protrainer 5 with an external infrared usb adapter. Using Wine to run Protrainer 5 and some adjustments mentioned here (using irda-utils) i managed to make it work. Well, sort of: every time i want to transfer exercise files and the adapter is not plugged in i have to reboot my laptop with the usb adapter plugged in to make it work. Since i have a laptop it unfortunately is no option to just always leave the adapter in. It seems to me that the usb adapter isn't hot pluggable (which seems odd for a usb device) or there must be another problem. Polar WebLink (other software to transfer exercise files) experiences the same issue. Can anyone help me to fix this problem? Infrared usb adapter: Polar IRDA USB adapter OS: Ubuntu 12.10 (64-bit) Hardware: Lenovo Thinkpad T500

  Read the article

• slow speed transfering files to a local network device

  - by F. Ariel Jung

  I'm having troubles copying files from my pc(ubuntu 13.04 64 bits) to a Media Center(WDTV Live: with an SATA2 HDD attached) through the local network. the speed is to slow, it's up to 2.0 MB/s image: http://s11.postimg.org/g1nuai92b/Captura_de_pantalla_de_2013_06_24_07_46_55.png (I don't use image tag because it is a big image) my PC has a wifi network card Tp Link TL-WN951N and it is connected to a TP Link TL-WDR3500 router via wifi, and the WDTV Live is connected via LAN here is a iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TL-WDR3500" Mode:Managed Frequency:2.462 GHz Access Point: A0:F3:C1:6C:3B:F1 Bit Rate=39 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:33521 Invalid misc:2245290 Missed beacon:0 if more data is required I'll post it as needed. I can't figure this out, needed help. please

  Read the article

• How do I configure my 2 RAID drives so I can use it as /home?

  - by Kenn

  I've installed Ubuntu 11 64-bit to a 2 TB drive. it is on /dev/sda - port 1 of SATA Host Adaptor. This contains /dev/sda1 (1 MB boot), /dev/sda2 (2TB EXT4), /dev/sda3 8.6GB SWAP. I also have: /dev/sdb 2TB RAID COMPONENT /dev/sdc 2TB RAID COMPONENT which also show as /dev/dm-0 not partitioned /dev/dm-2 not partitioned which is mounted as /media/RAID_HOME I'm completely stumped as to how to use this version of Ubuntu to make these drives seem as just one raid mirrored drive and then how to transfer /home onto it.

  Read the article

• Which version of Ubuntu is recommended for app developers?

  - by Wes

  I've searched around Ask Ubuntu and the App Developer site, but I can't seem to find the answers to my questions. I'm wanting to get back into programming, and I'd eventually like get into app development for Ubuntu, but I'm not sure where to get started. Which version of Ubuntu is currently recommended for app development, especially for those wanting to publish their apps to the Software Centre? Should app developers use the current LTS release, or, can any of the new releases be used? Should developers use the 32-bit or 64-bit edition of Ubuntu, or does this not matter? What effect would the above choices have on the eventual publication of an app? I'm truly sorry if this has been covered elsewhere. Cheers Wes

  Read the article

• Loud and annoying noise on login

  - by searchfgold6789

  I have a PC with Kubuntu 13.10 64-bit on it. The problem is that whenever I log in (automatic log in is enabled), there is a loud double-click noise that sounds from the speakers whether the volume is muted or not. I have two sound cards; the motherboard audio, which is disabled in the BIOS, and the Creative! Labs Sound Blaster X-Fi SB0460, which I have normal speakers plugged into. Does anyone know how to fix this? Relative lspci lines: 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] 02:05.0 Multimedia audio controller: Creative Labs SB X-Fi Using default Phonon backend. (I am not really sure what other information to provide, but will gladly edit in anything upon request.)

  Read the article

• "./configure: command not found" error when trying to install the JRE

  - by user74670

  I was trying to install JRE on my 64-bit ubuntu 10.04 installation. Just to be sure that that is what I really want, I need to run a .jar file. I downloaded java from this link. Then I chose linux x64 and downloaded the tar file, I extracted it and tried to compile the source code but had the error. I don't know whether I downloaded the wrong file or I ran the wrong commands in the terminal After I changed directory using the cd command to the extracted directory, I tried ./configure but I got this error: ./configure: command not found I know that there is an easier way to install java but I just want to understand how to install an application from source in linux as it seems that I will face this problem in the future. Thanks in advance

  Read the article

• Atheros AR2413 wireless not working after shutdown

  - by Chandrasekhar

  I am using a Ubuntu 11.04 on an Acer aspire 3680 laptop and my wifi is not working. I followed the below commands to install the madwifi driver: sudo su apt-get install subversion cd /usr/src svn checkout http://madwifi-project.org/svn/madwifi/trunk madwifi tar cfvz madwifi.tgz cd madwifi make && make install echo "blacklist ath5k" /etc/modprobe.d/blacklist.conf echo "ath_pci" /etc/modules modprobe ath_pci sudo reboot After installation I am facing the same problem. My wifi wont work after I shutdown. Infact it didn't work after suspend but I rectified that problem by the following commands: Command 1: sudo rmmod -f ath_pci sudo rfkill unblock all sudo modprobe ath_pci along with the command SUSPEND_MODULES=ath_pci added to the /etc/pm/config.d/madwifi directory. So if I suspend and then on my laptop the wifi loads well and doesn't create a problem. But if I shutdown my laptop the wifi never loads again and eachtime I have to run a Ubuntu 9.04 live CD to load it. I did try adding the Command 1 to the /etc/rc.local directory but still it doesn't work. So my question is: What should I do in order to make my wireless work without having to run a live CD of ubuntu 9.04 everytime after shutdown? Thanks. Here are the outputs which one might need: Output 1 chandru@chandru-acer:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 0a:03.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Output 2: lsmod Module Size Used by wlan_tkip 17074 2 binfmt_misc 13213 1 parport_pc 32111 0 ppdev 12849 0 snd_hda_codec_si3054 12924 1 snd_hda_codec_realtek 255882 1 joydev 17322 0 snd_atiixp_modem 18624 0 snd_via82xx_modem 18305 0 snd_intel8x0m 18493 0 snd_ac97_codec 105614 3 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m snd_hda_intel 24113 2 ac97_bus 12642 1 snd_ac97_codec snd_hda_codec 90901 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel i915 451053 3 snd_hwdep 13274 1 snd_hda_codec snd_pcm 80042 7 snd_hda_codec_si3054,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25269 1 snd_seq_midi drm_kms_helper 40971 1 i915 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event pcmcia 39671 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq drm 184164 4 i915,drm_kms_helper yenta_socket 27230 0 tifm_7xx1 12898 0 wlan_scan_sta 21945 1 ath_rate_sample 17279 1 pcmcia_rsrc 18292 1 yenta_socket psmouse 73312 0 tifm_core 15040 1 tifm_7xx1 snd 55295 18 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device serio_raw 12990 0 i2c_algo_bit 13184 1 i915 soundcore 12600 1 snd pcmcia_core 21505 3 pcmcia,yenta_socket,pcmcia_rsrc video 19112 1 i915 ath_pci 183044 0 snd_page_alloc 14073 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci lp 13349 0 parport 36746 3 parport_pc,ppdev,lp usbhid 41704 0 hid 77084 1 usbhid sky2 49172 0 Output 3 root@chandru-acer:~# lshw -C network PCI (sysfs) *-network description: Ethernet interface product: 88E8038 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 14 serial: 00:16:36:fb:aa:64 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:44000000-44003fff ioport:2000(size=256) *-network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wifi0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci ip=192.168.1.6 latency=96 maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11g resources: irq:18 memory:d0000000-d000ffff Output 4 root@chandru-acer:~# lsmod | grep ath_pci ath_pci 183044 0 wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci

  Read the article

• Connected to wifi, but quits loading pages after a random amount of time

  - by Collin

  I'm using Ubuntu 12.10, on a TOSHIBA Satellite L755 laptop, and using a Cradlepoint MBR-1000 wireless router. The wifi supposedly works fine on my sisters' and mom's laptops, and my dad uses a wired connection through the router. Nobody else has the problem. It shows that I'm connected and everything. The network manager GUI shows that everything is going just dandy... but it's not. I'll be able to load a page or two, then I have to disconnect, and reconnect to the router to get it to work again for a couple minutes. I noticed when I was downstairs, close to the router, this problem seemed to go away (at least, I was connected for a couple of hours without running into this problem). When I run ping -n 8.8.8.8 it shows this while the connection is still running fine 64 bytes from 8.8.8.8: icmp_req=1187 ttl=47 time=665 ms and whe

  Read the article

• Scrambled screen on 12.04 with Radeon HD 7670M/2GB when scrolling the page

  - by Mihkel

  I have Ubuntu 12.04 LTS 64 bit and I have installed proprietary drivers for my Radeon HD 7670M with 2GB memory. But if I scroll page or do anything like move a window then I get blurred screen (more like scrambled maybe) for a second and if I try to take PrtScr of it, it is goes to normal. I have tried other drivers and it does not solve my problem. And I do not want to go over 32 bit Ubuntu because I have 6 GB ram and I would lose so much of it. Also if it helps, my processor is Intel® Core™ i5-3210M CPU @ 2.50GHz × 4.

  Read the article

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• Extremely slow transfer speed ubuntu -> Windows

  - by Hailwood

  I have two laptops, One is running Ubuntu 12.04 (EXT4) the other is running Windows 7 (NTFS). I am copying over 40gb of data (one file) from the Ubuntu laptop to the Windows Laptop. (Browse the shared folder on Ubuntu using Windows copy/paste) But I am getting transfer speeds topping out at ~700kb/s Surely this is not right. I am transferring via wifi on both laptops. My download speeds can reach 7-8mb/s on both laptops, so I know it is not the wifi cards or the router topping out. wlan0 Link encap:Ethernet HWaddr 84:4b:f5:db:b4:85 inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::864b:f5ff:fedb:b485/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11941185 errors:0 dropped:0 overruns:0 frame:0 TX packets:11306693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10087111370 (10.0 GB) TX bytes:7843524888 (7.8 GB)

  Read the article

• Wifi problem in ubuntu using macbook pro when it restart

  - by Amro

  I was read that subject : http://ubuntuforums.org/showthread.php?t=2011756 and i follow it step by step in the page n 1 , then i was connect but after i restart my macbook again , i was lost the wifi connection.i dont know why or whats the problem exactly. every time I run this command: dmesg | grep -e b43 -e bcma I get this output: [ 2012.769684] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2012.769701] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64 [ 2012.769775] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 2012.769808] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 2012.769889] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 2012.770175] bcma: PMU resource config unknown for device 0x4331 [ 2012.824527] bcma: Bus registered [ 2012.831744] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 2013.371031] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) and to get the connection again every time i must entery that code in the step of reload driver. How i can let the ubuntu see my wifi and wireless device automatically when i reboot my computer????

  Read the article

• ubuntu 12.04 nvidia breaks resolution

  - by Terje Kristiansen

  i am running ubuntu 12.04 64-bit and i have a nvidia Geforce GT 650m, it was running fine with 1920 x 1024, except a lot of tearing everytime i ran videos. I thought activating the nvidia driver maybe would fix this. When entering "nvidia X server setting" it says " you do not appear to be using nvidia X driver. Please edit your X configuration file ( just run "nvidia-xconfig" as root), and restart the X server. I did and then the computer reboots with a resolutioin of 640 x 480. How can i restore the previous settings, or preferably get it to show full resolution without tearing ? When i enter "nvidia X Server Settings" now it still says the same as above, " do not appear to be using nvidia X driver" when i go to "system settings, additional drivers" it says nvidia_current -- "This driver is activated but not currently in use" astr0

  Read the article

• 4 Places To Find Up-To-Date Antivirus Test Results Online

  - by Chris Hoffman

  Do you know how effective your antivirus programs is? A variety of organizations regularly compare antivirus programs, throwing a large amount of malware samples at them, seeing how they perform, and ranking them in comparison to each other. It would be very time-consuming to test 30 different antivirus programs in virtual machines with a large amount of malware samples yourself, which is why these test results are so useful. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• while upgrading a virtual machine do I need to install a bootloader

  - by Bond

  I have a virtualization server which is having a few virtual machines running at top of it. All this was done using Ubuntu server edition with KVM and using virt-manager on SSH connection. These VMs are Lucid 10.04 64 bit Vms. When I upgrade them via apt-get upgrade on an SSH connection in between the ncurses screen, it asks me if it should install a bootloader and to select Yes or No for it. I have no clue what should I select here and I cancel the upgrade.Since it is a production machine I can not specify any thing like this. So let me know what will be a correct.

  Read the article

• Seagate sortira un disque dur de 3 To en 2010, le produit est officiellement confirmé

  Seagate sortira un disque dur de 3 To en 2010, le produit est officiellement confirmé La responsable produit de Seagate Barbara Craig a fait une annonce à l'un de nos confrères anglais, suite a des rumeurs persistantes qui animaient la toile. Et elle a confirmé ce que beaucoup avaient annoncé : Seagate sortira un disque dur d'une capacité phénoménale de 3 To au cours de l'année 2010. Ce monstre de stockage ne sera cependant pas compatible avec Windows XP (qui ne permettrait la visualisation et l'utilisation que de moins d'un tiers du disque). Il fonctionnera par contre avec ses successeurs, mais en versions 64-bits uniquement. La faute au standard d'adressage logique des disques durs, qui commence à se...

  Read the article

• Ubuntu 12.04 desktop crash [closed]

  - by David Mannock

  12.04 is stable under a light load, but not under intensive use of Gaussian 09 vB1. Looks like a heating issue, but psensor says that all is well on 32-cores @56C. Similar results for 64 cores. Machine shuts down after 2-3h. Syslog shows shut down. Whoopsie crash reporter sends in report. After 259 updates on the weekend, I am left wondering what the heck is wrong with this release? My answer would be "EVERYTHING!". Can someone help me do some systematic checks on this OS and hardware.

  Read the article

• Bootable usb stick not boots

  - by Pavaroti Luciano

  i have problem. My bootable usb stick not boots any linux distribution.. it just stop at BIOS, like before turning on OS, but it does nothing. Windows xp/7/8.1 installs boots perfectly. It stopped booting every linux dist. after windows 8.1 installation. Later i deleted windows 8.1 and installed windows 7, and now i want to install ubuntu from usb, but i cant(From disk every linuxOS boots perfectly but not from usb) My computer now is like ~7years old. Specs: CPU: AMD Athlon 64 X2 5000+ Motherboard: GIGABYTE GA-M56S-S3 Video card: Nvidia n210 EDIT: It boots on my other laptop..its bootable, but from this.. NOpe, only windows installs

  Read the article

• Linux ciblé par un mystérieux Rootkit infectant des sites Web par injection d'iFrame

  Linux ciblé par un mystérieux Rootkit infectant des sites Web par injection d'iFrame Des chercheurs en sécurité ont découvert un nouveau Rootkit ciblant les plateformes Linux. Le 13 novembre dernier, un propriétaire de site Web agacé par le comportement d'un programme poste sur le mailing-list Full Disclosure celui-ci afin d'obtenir des clarifications sur son rôle. Les experts en sécurité de Kaspersky et CrowdStrike ont confirmé par la suite qu'il s'agit d'un Rootkit conçu pour attaquer les systèmes d'exploitation Linux 64 bit, plus précisément la dernière version du kernel utilisée dans Debian Squeezy. D'un code relativement simple et encore en phase d'exp...

  Read the article

• Making body(box2d) a spite(andengine) in android

  - by Kadir

  I can't make body(box2d) a spite(andengine) and at the same time i wanna apply MoveModifier to sprite which is body.if i can make just body,it works namely the srites can collide.if i can apply just MoveModifier to sprites,the sprites can move where i want.but i wanna make body(they can collide) and apply MoveModifier(they can move where i want) at the same time.How can i do? this my code just run MoveModifier not as body at the same time. circles[i] = new Sprite(startX, startY, textRegCircle[i]); body[i] = PhysicsFactory.createCircleBody(physicsWorld, circles[i], BodyType.DynamicBody, FIXTURE_DEF); physicsWorld.registerPhysicsConnector(new PhysicsConnector(circles[i], body[i], true, true)); circles[i].registerEntityModifier( (IEntityModifier) new SequenceEntityModifier ( new MoveModifier(10.0f, circles[i].getX(), circles[i].getX(), circles[i].getY(),CAMERA_HEIGHT+64.0f))); scene.getLastChild().attachChild(circles[i]); scene.registerUpdateHandler(physicsWorld);

  Read the article

• Turning off the backlight on the console

  - by Albertas Agejevas

  I'm using an IBM Thinkpad X21 as a 3G router. It's running a server install of lucid. The laptop has the lid up most of the time. There is no X, just a plain console. The colsole blanks itself, but the LCD backlight is always on. The graphics chip is ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64). The following modules related to the framebuffer are now loaded: $ lsmod | grep fb fbcon 35102 71 tileblit 2031 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon vga16fb 11385 1 vgastate 8961 1 vga16fb Can I make the LCD backlight turn off when the colsole is unused and have it turn on automatically when needed?

  Read the article

• Dropbox indicator icon dissapears right after login

  - by garvamel

  Even though Dropbox's app indicator dissapearing from the tray area seems like a recurrent enough problem, my issue is a litte different. When I login, I can see the app panel populating, and the dropbox icon does indeed appear (config'd as startup application), but after some other icons show up (bluetooth, battery, etc.) it's gone. It's still running though. I'm guessing it's having issues with staying pinned, and I don't know how to start addressing this problem. I have tried many if not all solutions provided here in the forums for the "icon missing" questions. So far: I've whitelisted everything regarding panel Uninstalled-reinstalled (with and without rebooting in between) Overwritten current installation Purged installation from terminal Installed from Software Center and from .deb file batch deleted every "dropbox" ocurrences from terminal (files and folders) and reinstalled Ran sudo apt-get install libappindicator1, it installed, but didn't solve anything I'm on Ubuntu 12.04 LTS - 64 bits. Any insight would me much appreciated!

  Read the article

• Installing drivers for an ATI 6950 in Ubuntu

  - by aj.esler

  Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >