Search Results

Search found 6018 results on 241 pages for 'terminal emulator'.

Page 169/241 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• Can't connect disk management to remote XP PC from local Win7/Server 2008

  - by Grez

  Scenario as follows: support technicians using Windows 7 PC's or Server 2008 terminal server are unable to connect Disk Management MMC snap in to a remote PC when the remote device is running Windows XP. "Disk management could not start Virtual Disk Service (VDS) on ". This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall." Connecting from another XP machine or 2003 server to the same XP machines works fine. Even connecting from XP/2003 to the Win7 or 2008 server works fine. Windows firewall disabled on all devices. I'm guessing this is something to do with the fact that XP uses logical disk manager service whereas Win7/2008 use Virtual disk manager service. But there doesn't seem to be any way to use logical disk manager service from 7/2008 to connect to XP...

  Read the article

• Looking for QNX compatible server hardware

  - by Sergey Sobolev

  Can you help me to find compatible modern server for QNX, please? This is quite rare OS, so most of the hardware vendors do not have compatibility information. It would be very helpful to me if you can do the following: Download iso http://www.qnx.com/download/download/19602/qnxsdp-6.4.1-x86-200905201802-nto.iso burn to cd Start from cd press F2 - try from CD start Utilities/Terminal run sloginfo /tmp/sloginfo.log; get_hw_info; pci -vvv /tmp/pci-vvv.log send logs from /tmp/ to [email protected] with system model/build I will summarize results afterwards and post them here. I'm especially interested in Fujitsu RX100 S5 as it looks like one of the most compatible servers with frontally accessible HDDs.

  Read the article

• Disk space consumed

  - by aravind-zoniac

  I have a very serious problem here in one of my client server. The remote server is installed with REDHAT ES 5.2 and we have a postgresql as database. I was trying to clone the database. The hard drive had 32 GB of free space before taking clone. I started cloning the database and during the process, there was some internet issue and due to this, putty got disconnected before taking clone. So I opened another fresh session and I was able to see only 2.5GB as available space. Also I was not able to see the clone in the psql terminal. Any solution to get the 29GB that was consumed????

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• SQL Server Express 2005 cannot connect

  - by jp

  hi all, I have a SQL Server Express 2005 install on a godaddy virtual terminal which currently is only connected to(locally with mgt studio) every few days or so. Every time i try to connect I get a cannot connect to SQL Server error and after a restart it I can connect just fine locally. I was wondering if there is a timeout setting or something that I am missing that I need to change so that if it is not connected to for a while it does not required a restart? any ideas? thanks!

  Read the article

• Win 2008 r2 -- client and server are both behind a NAT

  - by Mike Dehari

  I am new to win2008. Have Win2008 R2 installed. Need to know how a client system (Win7), using remote desktop, terminal server, or whatever windows 2008 provides to connect to it (as a user or an admin). Both the client (Win7) and the server (win2008) are inside a NAT (with 192.168......... addresses). Both have real internet addresses (they are in different cities 173.64.......). How can I use the internet from the client (Win7) to connect to the server (Win2008). On both systems, I have "allowed other systems to connect". I am familiar with tcp/ip, ports......etc.

  Read the article

• How do I connect to my wireless router settings on Linux?

  - by Joshua Robison

  My network is as follows: Internet Provider's DSL modem connected to Internet Provider's router connected to My Buffalo Wireless router connected to My Toshiba Laptop via WEP network My Toshiba Laptop is running LMDE Linux Mint Debian Edition Service Pack 3 i686 kernel I have experience using various routers and their configuration settings but for some reason I can not access my wireless router. In my cromium browser I tried the following ip addresses: Standard Usual IPs : 192.168.1.1, 192.168.0.1 (connection hangs and goes no where) On the back of my router: 192.168.11.1, 192.168.11.100 (connection hangs and goes nowhere ) In some tcpip info: 192.168.24.1 (unable to connect error message) If someone could give me some terminal commands that will help me find my wireless router address or some trouble shooting ideas, I would be very thankful.

  Read the article

• printing foreign text for PHP on UBUNTU and CENTOS

  - by hao

  Hey guys, I am using domdocuments and using things like $div-nodeValue to obtain certain info from a web page. On my ubuntu machine when i do php crawl.php everything is displayed properly in Chinese (the page is in UTF-8). However on my CENTOS machine using the same code I get æ´å¤åå¸ when I print in the terminal. and when I save it to the database, the characters are also messed up. One thing I noticed is that when I do print $content, both systems display them properly.

  Read the article

• upgraded to OSX 10.6.6 - now cannot sudo

  - by rahulk

  I've been using sudo until now. After an upgrade to 10.6.6, now sudo gives me incorrect password. My user has admin rights, and i can execute admin functions from the GUI (such as System Prefs, updating software etc). However, within Terminal, sudo has stopped accepting the password. I have repaired permissions and restarted. Some pointers ask me to use Directory Utility, but in this version it does not have a "set root user" option. I downloaded ServerAdminTool 10.5.7 but this does not work on my system. Some say to add myself to "wheel" group, but i need sudo for that. Some say if i am in admin group, i should be able to sudo, but this is not happening. (Using OS X Snow Leopard 10.6.6, earlier 10.5.8) MODERATOR: please delete this question. The issue had to do with Textpander expanding the password resulting in sudo failing. Not an OS upgrade issue.

  Read the article

• ssh-agent key timeout with screen or tmux on bastion host

  - by Jericon

  Normally I have ssh-agent running, I ssh to my bastion host then open a tmux session and connect to other boxes through that. Key forwarding works for any sessions that I open from that point forward. If I resume my tmux session after closing terminal, sleeping my laptop, whatever, my key forwarding on my bastion sessions still work, as does forwarding on any new sessions. Existing ones don't work, though. I have a little thing in my bashrc that keeps key forwarding working when I resume tmux, but I am having trouble figuring out how to get it to keep working for sessions open within tmux. For example, I have bastion01, dbhost01, dbhost02, webhost01, and webhost02. If I open a connection to bastion01, start tmux there, and then connect to dbhost01 and webhost01 forwarding works. If I close that connection, reconnect and attach my existing tmux session, then add connections to dbhost02 and webhost02, key forwarding works on the 02 boxes, but does not on the 01. Please help!

  Read the article

• Is it possible to interrupt or cancel the trash-delete process?

  - by pete

  I am connected to the company server, onsite not remote, which is Windows based. When, in the OS finder, I go to delete a file or directory that resides on the window-based server, the trash progress panel appears as usual. Not infrequently it will just hang there appearing to be active but no progress occurs on the progress bar. So the X is chosen to stop or cancel the process. A new panel appears, and while appearing to be active, again, just hangs there indefinitely. My lack of reputation prevents posting a screen shot - sorry. The question then is this: Is there a way via the Activity Monitor, Terminal, etc. to interrupt this deleting process in the Mac OS? Currently, I have to force shutdown and reboot to eradicate the ever-deleting panel. Finder relaunch does not solve and only eliminates the finder until I force reboot. Any assistance is appreciated. Thanks, Pete iMac, Mac OS X (10.6.8), i7-2.8ghz, 8gb ram

  Read the article

• Linux - Debian - Original groups that a user is in

  - by Auxiliary

  This is embarrassing; I used the usermod command to add myself to the disk group. However I forgot to use the append option! so I'm not a member of any of the groups that I was originally, now terminal says that I'm not even a sudoer (How rude!). So the question is: What are the original groups that a normal Administrator type of user is in? BTW, I am using Linux Mint Debian Edition (LMDE). Any help is appreciated.

  Read the article

• How to change the $PATH in Mac OSX

  - by Samuel Elgozi

  I've installed git via the instaler and not with terminal with commands, and my $PATH changed, the path to the 'local' git was added the the end of the variable, and my $PATH changed to this: /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin However, that doesnt help me, because i the path to Xcode's git comes first. so what I've done is the next, I added this lines to my '.bash_profile': export PATH="/usr/local/git/bin:$PATH" and now my path is the next: /usr/local/git/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin And I wanted to know how to remove the duplication from the end of the Path so I end up with: /usr/local/git/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin Thanks Ahead! And sorry if my english is too bad..

  Read the article

• Printing from a Linux using an Acer Aspire Netbook

  - by JoelFan

  A friend asked me to check why their Linux Acer Aspire netbook can't print to their HP printer. When I plugged in the USB cable, the a "balloon" popped up on the netbook saying it was installing the printer. But the printing does not work. I was able to get into a Settings area and click on Print Test Page but nothing happened. If it was Ubuntu, I would go into the Log File Viewer, but I couldn't find that on whatever Linux flavor the Acer is running. I couldn't even figure out how to get to a terminal (shell) window. I tried searching the HP and Acer sites but nothing seems to apply to this issue.

  Read the article

• Linux router and firewall with IP accounting

  - by Andrew

  I'm working on a project to replace my organisation's aging Slackware gateway/router/firewall machine in our colo rack. Previously we used rc.firewall but we are now looking for something more modern and easily configurable. The requirements are: Act as a gateway router & firewall Port forwarding to a Terminal Server in the colo IP/traffic accounting, preferably accessible via SNMP (already using cacti for other servers) Possibility of acting as a PPTP server & routing these connections Is not an out-of-the-box Cisco product (don't have the finances or support to maintain it) I'd prefer to use Ubuntu or some other Debian-based distro but something that integrates everything we're looking for is certainly an option if it offers all the desired features and is easy to configure. Is there a simple set of packages that will provide me with the Firewall & Accounting features, or am I best served with a custom-built distro / other solution?

  Read the article

• rsync error unexplained error (code 255) at io.c

  - by kabeer

  I was using a script to perform rsync in sudo crontab. The script does a 2-way rsync (from serverA to serverB and reverse). After i reboot both the server machines, the rsync is not working in sudo crontab. I also setup a new cronjob and it fails, The error is: rsync error: unexplained error (code 255) at io.c(600) [sender=3.0.6] rsync: connection unexpectedly closed (0 bytes received so far) [receiver] However, when run from terminal, the rync script works as expected without issues. please help.

  Read the article

• Run a batch file silently, executed at remote desktop login

  - by ILMV

  In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

  Read the article

• GNU screen configuration for optimal keycode recognition

  - by intuited

  Currently GNU screen will botch up certain keystrokes, for example CTRL pressed in combination with the arrow keys, so that eg when in vim insert mode, CTRL-PGUp will Uppercase the next/current word (or something like that). I'd like for it to work pretty much transparently, so that the functionality is the same as when it's not running (with the obvious exception of CTRL-a control sequences)... is this possible? Also — and I suspect this is more or less a separate issue — I'd like for the scrollwheel to scroll back in the session log rather than cycling through the history as it does now. Doable? Or perhaps it could be set to emulate a much larger screen size that the terminal app that it's running under could keep that text in its session log. either way the goal would be to be able to use the mouse wheel and/or shift-up-arrow to scroll back in the session log.

  Read the article

• Konqueror on Windows XP : protocol not supported - man

  - by Michael Mao

  Hello everyone: I am new to the KDE and I am working all the time in a Windows XP environment. So I installed the KDE's Konqueror browser onto my laptop. The only reason for that is to allow me issue man:ls in the browser address bar and to get the man page displayed into the browser rather than printed inside the terminal. The problem is, I then get the error prompt saying that: protocol not supported man I guess something is wrong in the configuration, how to fix this problem? Many thanks in advance. The problem is definitely not the Konqueror browser, but is between the keyboard and the screen...

  Read the article

• Windows 2008 R2 server cannot access shares on other servers

  - by Rob

  I have a problem on my new 2008 R2 64-bit server. Essentially the server sometimes refuses to access shares on other server. in the format \\servernam\sharename sometime it works and then for a few hours it doesn't and then at randon it comes back online. This is a local AD network and have even put in a new gigabit switch between all server. All the old 2003 servers work fine so I know DNS and WINS is all ok. I get error 1006 in eventlog saying that my R2 server can't contact the domain controller when it clearly can. Just to add to the config, it is running on a Dell PowerEdge R410, Vmware Esxi 4.0 and R2 is configured as a terminal server. I can always view shares with FQDN This morning net view \\ did not work but net view \\ did. Very random and very frustrating. any ideas? thanks

  Read the article

• issues changing default version when updating Python on Mac

  - by Emma

  I have a MacBook that came with Python 2.5 installed. I need use a newer version, so I downloaded 3.1 and installed it, then ran the "Update Profile Script" that came with it, which is supposed to change the default version of Python to the one I downloaded. It appeared to run fine and said process completed, but it didn't work. When I type "python" into the terminal it displays version 2.5, and I still can't install pygame, which requires at least Python 2.6. When I do vi .profile I get this: export PATH=.:/opt/local/bin:/opt/local/sbin:$PATH export MANPATH=/opt/local/man:$MANPATH Setting PATH for Python 3.1 The orginal version is saved in .profile.pysave PATH="/Library/Frameworks/Python.framework/Versions/3.1/bin:${PATH}" export PATH ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ".profile" 6L, 251C So it looks like the script did do something, but I don't know enough bash script to understand what. Does anyone know what the issue could be or how to fix it? Thanks a lot!

  Read the article

• modsecurity apache mod-security.conf missing

  - by TechMedicNYC

  Greetings Serverfaultians. I'm not a server guy as you can see from my noob score of 1 point. But maybe those more versed can help me. I'm using Ubuntu v13.10 32-bit Server and Apache2 v2.4.6 and I'm trying to set up and configure modsecurity and modevasive on an internet-exposed production/test server. I am trying to follow this tutorial: http://www.thefanclub.co.za/how-to/how-install-apache2-modsecurity-and-modevasive-ubuntu-1204-lts-server. But at step 3: Now add these rules to Apache2. Open a terminal window and enter: sudo vi /etc/apache2/mods-available/mod-security.conf This file does not exist. Any suggestions?

  Read the article

• Server 2008 blue screen after login - no desktop

  - by Jake

  I came into work today to find that our Windows Server 2008 used as a terminal server for the Thin Clients was not loading the users desktops. What I have found out is that when I login via Remote Desktop, after applying user settings, it gets to the stage of 'Preaparing your desktop', but then the screen just goes blue. I have tried rebooting several times with no luck, and logging in locally at the server with no luck. Does anyone have any suggestions? I do not think that it could be a virus attack as we run antivirus on the server with OpenDNS filtering. Yesterday a software restriction policy was set up to only allow programs in the following directories to run if that could be the problem, although it was working fine all day yesterday. C:\program files C:\programdata C:\windows Thank you. Jake

  Read the article

• How to automount SMB shared network drives in Mac OS X Lion

  - by cyppher

  In Mac OS X 10.7 (Lion) Apple has replaced good old SMB support. Now I can't auto connect to my shared (SMB) network drives. Workarounds? Or Impossible? In OS X Snow Leopard, I could automatically connect my Ubuntu (SMB) shared network drives with auto_smb / auto_master (autofs configuration in /private/etc/). I made three mount points (folders) directly in '/Volumes', I used /Volumes/Data and /Volumes/webroot (both SMB shared). Unfortunately Lion doesn't connect (automount) my network drives. I have to manually connect to the server (Ubuntu file server) in Finder, then open up Terminal to navigate to the mount points, and then it connects. This is not a workable solution. I've searched (Google/SO) but found no solutions apart from an unsupported hack. Isn't it possible any more to automatically connect to an SMB-shared drive during startup?

  Read the article

• Is there a free-embedded SSH solution ?

  - by ereOn

  Hi, I'm working for an important company which has some severe network policies. I'd like to connect from my work, to my home linux server (mainly because it allows me to monitor my home-automated installation, but that's off-topic) but of course, any ssh connection (tcp port 22) to an external site is blocked. While I understand why this is done (to avoid ssh tunnels I guess), I really need to have some access to my box. (Well, "need" might be exagerated, but that would be nice ;) Do you know any web-based solution that I could install on my home linux server that would give me some pseudo-terminal (served using https) embedded in a web page ? I'm not necessarily looking for something graphical: a simple web-embedded ssh console would do the trick. Or do you guys see any other solution that wouldn't compromise network security ? Thank you very much for your solutions/advices.

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >