Search Results

Search found 1323 results on 53 pages for 'eric ness'.

Page 17/53 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Mac OS X Server 10.6.6 DNS not responding properly, get a "Truncated, retrying in TCP mode" for subdomain

    - by Eric Arseneau
    If I do an nslookup on youtube.com, no problem, if I do one with www.youtube.com, failure. See details below. [~] nslookup youtube.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: Name: youtube.com Address: 74.125.127.93 Name: youtube.com Address: 74.125.47.93 Name: youtube.com Address: 74.125.95.93 [~] nslookup www.youtube.com ;; Truncated, retrying in TCP mode. ;; Connection to 192.168.1.1#53(192.168.1.1) for www.youtube.com failed: connection refused. If I do the same from a Windows machine its fine, its when I do it from a Mac workstation that I get the issue. I have rebooted, both server and workstation, I did a changeip, but nothing is working. Any recommendations?

    Read the article

  • Recover an HP recovery partition

    - by eric.chartier
    I have a (semi)-dead hard drive with an HP recovery partition on it. My goal is to Buy a new hard drive Copy the recovery partition to a drive ( dd if=/dev/sdb1 of=~/recovery.bak ) Make a new partition of 12000 mb with Windows 7 Copy back recovery partition to the new drive ( dd if=~/recovery.bak of=/dev/sdb1 ) Then press F11 when the laptop boots. However, this doesn't work. Any idea why? Edit: I suspect the F11 doesn't work because the laptop tries to boot the laptop, because my partition is the primary partition of the drive. Does anyone have any experience dealing with stuff like this?

    Read the article

  • Restoring WordPress EC2 instance from snapshot results in 403 Forbidden error

    - by Eric Matthew Turano
    This problem has been perplexing me for weeks now. Here's how the issue goes: Launch Amazon Linux 64-bit instance, successfully install WordPress, and site is active w/ no issues Create snapshot of the instance's root volume Shut down instance Create volume from snapshot, attach to instance, and reboot instance Associate Elastic IP with instance Once that's done and I try logging onto the site, I am redirected to myurl.com/wp-admin/install.php and greeted with this message: Forbidden: You don't have permission to access /wp-admin/install.php on this server. Apache/2.2.25 (Amazon) Server at www.myurl.com Port 80 Port 80 is open on the inbound security group settings, so that's not the issue. Keep in mind all I am doing is merely creating a new volume and attaching it to the same instance, and this issue comes up. What am I doing wrong, and how can I create a complete backup of my instance without this error occuring?

    Read the article

  • Map Caps-Lock to Control in Windows 8.1

    - by Eric Huang
    Before the Windows 8.1 update, I was able to map Caps-Lock to Controls through the type of registry tweak in this post: Remapping a keyboard key in windows 8.1 However, after updating to 8.1, my tweak no longer works. What I had done was Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] "Scancode Map"=hex:00,00,00,00,00,00,00,00,02,00,00,00,1d,00,3a,00,00,00,00,00 Windows 8.1 may have changed how it interprets the keyboard layout registry, I'm guessing. I'm an avid emacs user, so this problem is a life-or-death scenario for me.

    Read the article

  • Consolidate SQL Server Reporting Services

    - by Eric C. Singer
    I've been a big fan of consolidating as many DB's to a few SQL servers for a while and I've had great success with it. However, I've never had to deal with SQL reporting services. Has anyone migrated SSRS from a bunch of random SQL servers into a consolidated SQL server? I don't exactly know a whole lot about SSRS which is part of the problem. To my knowlege, it's one DB per SSRS instance, so it sounds like i'd need to find a way of exporting data and merging it. Basically the process used to look like: Move DB from SQL Express to shared SQL server Change point in APP to point at new SQL server With reporting services, how do I move the reporting service compenent of the DB as well? I realize I may need to tweak the app, but my question is on the SQL side.

    Read the article

  • Log centralization, display, transport and aggregation at scale v2

    - by Eric DANNIELOU
    This is a duplicate question of Log transport and aggregation at scale and http://stackoverflow.com/questions/1737693/whats-the-best-practice-for-centralised-logging, but the answers might differ now : The softwares described in 2009 may have changed since (for example Octopussy evolved from version 0.9 to 1.0.5). Rsyslog has become the default on most linux distro. Requirements have changed (security, software configuration management, ...). I'd like to ask the following questions : How do you centralize, display and archive system logs? How would you like to do it now if you had to? Most linux distro use rsyslog nowadays, which can provide reliable log transport. But some older unices, network devices and maybe windows box still use old udp rfc-style transport. How did you manage to get reliable transport? Storing logs for a few months can represent a huge amount of disk space. How do you store them? rdbms? Compressed and encrypted text files?

    Read the article

  • moving to a new dedicated server and need advice on the new setup

    - by Eric Martin
    I currently have a dedicated server that we have outgrown and we are moving to another server. Our current setup was a 8gb W2008R2 server running a W2008R2 IIS virtual machine using VMWare. We are moving to a 2 cpu 24 gb server with W2012 R2 on Hyper-V. On our virtual machine we are running iis 7.5 and sql server. Sql Server seems to want to eat up all the memory so I had to cap it at 2gb, which doesn't seem sufficient. My question is, when I move the virtual machine to the new server, should I create 2 virtual machines, one for sql server and one for IIS? Or should I leave them both on the same virtual machine? Or even, put the Sql Server on the dedicated server and run the IIS in the vm? I'd like some input on how this should be done, I've not got the experience needed to make the right call. Thanks!

    Read the article

  • Monitor blinks frequently

    - by Eric J.
    I recently resolved an issue that was causing one monitor not to be recognized by Windows by running a tool called Driver Sweeper to remove all old driver remnants, then updating to the latest nVidia drivers. Prior to that procedure the main monitor worked fine. After that procedure (now with the second monitor recognized), the main monitor blinks frequently. About once every 15-30 seconds, the monitor goes dark for the blink of an eye. Sometimes it only appears to happen in the bottom portion of the monitor, but other times it seems to affect the whole screen. Can this be caused by the particular driver? Could it just be an unlucky coincidence and the main monitor is starting to fail? I hesitate to experiment with new driver versions after having just restored the second monitor to a working state, so hope for some feedback before heading down that road.

    Read the article

  • Why is /usr/bin/env permission denied to rails server?

    - by Eric Hopkins
    I've just set up rails on an apache server running on Ubuntu, and when I try to go to the root page it gives this error: /usr/bin/env: bash: Permission denied env and all the directories in the path all have permissions 755. I tried setting env to have permissions 777 but still got the same error. Rails is running as "nobody". Why is this happening? I don't know what else to try. In /etc/apache2/sites-available/api.conf: <VirtualHost *:80> ServerName api.thinknation.ca ServerAlias api.thinknation.ca DocumentRoot /var/www/api/public ErrorLog /var/www/logs/error.log CustomLog /var/www/logs/access.log combined RailsSpawnMethod smart <Directory /var/www/api/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews -Indexes # Uncomment this if you're on Apache >= 2.4: Order allow,deny Allow from all #Require all granted </Directory> </VirtualHost> From config/database.yml in my rails directory (with sensitive user names and passwords omitted): default: &default adapter: mysql2 encoding: utf8 pool: 5 username: root password: socket: /var/run/mysqld/mysqld.sock development: <<: *default database: api_development test: <<: *default database: api_test production: <<: *default url: <%= ENV['DATABASE_URL'] %> database: api username: ------------ password: ------------ Not sure what other details or files are relevant, I will add them if needed.

    Read the article

  • Windows 7 Multi-NIC woes

    - by Eric
    I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

    Read the article

  • Samba server NETBIOS name not resolving, WINS support not working

    - by Eric
    When I try to connect to my CentOS 6.2 x86_64 server's samba shares using address \\REPO (NETBIOS name of REPO), it times out and shows an error; if I do so directly via IP, it works fine. Furthermore, my server does not work correctly as a WINS server despite my samba settings being correct for it (see below for details). If I stop the iptables service, things work properly. I'm using this page as a reference for which ports to use: http://www.samba.org/samba/docs/server_security.html Specifically: UDP/137 - used by nmbd UDP/138 - used by nmbd TCP/139 - used by smbd TCP/445 - used by smbd I really really really want to keep the secure iptables design I have below but just fix this particular problem. SMB.CONF [global] netbios name = REPO workgroup = AWESOME security = user encrypt passwords = yes # Use the native linux password database #passdb backend = tdbsam # Be a WINS server wins support = yes # Make this server a master browser local master = yes preferred master = yes os level = 65 # Disable print support load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # Restrict who can access the shares hosts allow = 127.0.0. 10.1.1. [public] path = /mnt/repo/public create mode = 0640 directory mode = 0750 writable = yes valid users = mangs repoman IPTABLES CONFIGURE SCRIPT # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -p udp --dport 137 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 137 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp --dport 138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 445 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 445 -m state --state ESTABLISHED -j ACCEPT # Make these rules permanent service iptables save service iptables restart**strong text**

    Read the article

  • Log into another XP machine's SQL Server with a different userid? (WORKGROUP, not domain)

    - by Eric H.
    I have two machines at home, both XP Pro SP3. I have no domain controller, so they're both just in WORKGROUP. How can I, using Windows Authentication, log into an instance of SQL Server running on the other machine? Whenever I try it, it seems to try to login as 'Guest', even though I have entered the machine name (OTHER-DESKTOP), and login (OTHER-DESKTOP\otheruser) in the User Accounts Control Panel box. It works fine if I use sql server name and password, so I know the server is running. Any clues?

    Read the article

  • DNS resolution over DHCP

    - by Eric
    I have a m0n0wall router a VMWare workstation running ubuntu a windows 7 workstation running the VM The ubuntu hostname is "renraku" From the windows machine I can't resolve dns automatically for this host. For example, when I ping renraku Ping request could not find host renraku. Please check the name and try again. However nslookup seems to work nslookup renraku Server: m0n0wall.local Address: 192.168.123.254 Name: renraku Address: 192.168.123.248 I don't get how to have ping to work with hostnames. The main goal behind this is to have my web server to work with hostnames instead of ip addresses EDIT : ping 192.168.123.248 works

    Read the article

  • PLesk Error: pmm-ras error (Error code = -6): during restore.. /tmp folder to increase?

    - by eric
    I had to re-install plesk on a centos 6 system after a crash. The full backup file is 11 gb. but at the beginning of the backup reinstall I get the error Error: pmm-ras error (Error code = -6): argh ! my disk organization is like this Filesystem Size Used Avail Use% Mounted on /dev/xvda1 3.7G 801M 2.9G 22% / /dev/mapper/vg00-usr 14G 1.5G 12G 12% /usr /dev/mapper/vg00-var 155G 14G 134G 10% /var /dev/mapper/vg00-home 3.9G 136M 3.6G 4% /home none 1000M 7.5M 993M 1% /tmp I suppose I have to increase my /tmp folder to accept the backup size,but I don't know how-to. I'm on 1&1 cloud server Thanks for your help. You can imagine the emergency of this situation...

    Read the article

  • How can I prevent an unintentional DDOS running ColdFusion 8 with IIS 6?

    - by Eric Belair
    We had an interesting outage today on one of our client's websites. Out of nowhere, the website was inaccessible. The website runs by itself on a dedicated physical Windows 2000 server (probably overkill, I know, but that's a discussion for a different day). After restarting IIS and ColdFusion Application Service, the problem came back several times. My initial thought was that it was a DNS issue, which happens occasionally - the last time it happened was after Hurricane Sandy when we our ISP was out, and we had to make some network config changes. But, it was not a DNS issue. My second thought was that it was a DDOS attack, but, there's very little reason anyone would want to take this site down. When we called our ISP, the operator on the other end noted that traffic was spiking significantly. As it turned out, the client had unintentionally caused a DDOS on the website, after they FTPed a very large video file, and then mass emailed a link to it. Hundreds of people clicked the link and brought the site to its knees. I am primarily a Website Programmer, but I often have to contribute to server administration at times. Sadly, I'm the resident ColdFusion and IIS expert, but I don't have a lot of experience with this issue. What are some basic steps that I can take to prevent this from happening in the future, since we cannot always control what files the client posts to the website. Here are some ideas I had, but I'm unsure of the impact: Limit the number of connections in IIS. Put media files on a separate server (like an Amazon site, etc.). File requests of this type currently behind a server-script (i.e. /www.site.com/viewFile.cfm?fileId=1424545, where the fileId references a file off the webroot) that logs requests, and pushes the file to the browser using CFCONTENT. I could edit this script to reject requests when they exceed a certain amount in a given time-frame (i.e. a 5MB can be accessed globally 10 times in an hour). This may cause some users frustration, but, if hundreds of users are attempting to view the file, the site is going to crash anyways, as it did today, which is way more frustrating, since there is no "pretty" message explaining why they can't get to the file. I'm open to any suggestions, as I'm continuing my research to report to the CTO with the best options, so that we can put a solution into effect. Thank you.

    Read the article

  • Sound stopped working on Toshiba Satelite C855

    - by Eric Wilson
    I have a Toshiba Satallite C855 running Windows 7 with a Realtek High Definition Audio card. Sound worked fine yesterday. Today, my two-year old did something to the machine, and I have no sound. I have adjusted sound through the icon in the lower right corner, and using the Fn keys. I have rebooted. I've verified that there are no external speakers plugged in to the laptop. It seems that this model does not have an external volume control. (If it does I can't find it.) Any ideas?

    Read the article

  • Can't install LibreOffice on Windows 7

    - by Eric Wilson
    I've just downloaded LibreOffice 4.1.3 (twice) on a newly refurbished Windows 7 Thinkpad. When I click the .msi to install, I get "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package" How do I obtain a usable copy of LibreOffice for Windows? I also tried 4.1.2 and 4.0.6 also, after 4.1.3 failed. 4.1.2 started fine, but encountered an error and failed to install. 4.0.6 fails in the same way as 4.1.3. I have used 7-zip to test the 4.1.3 msi, and it is unable to open it ...

    Read the article

  • Web Server Routing Based On Location

    - by Eric
    I have a website that has users from both Hong Kong and Australia. Unfortunately, since the server is located in Australia, users from Hong Kong are going to suffer latency problems. Traffic has to go through US before travelling back to Australia. So I've setup a server in Hong Kong as well, and users using the .hk TLD are going to be redirected to the Hong Kong web server. It shares the same database server with the Australian server but due to aggressive SQL query caching, impact on performance from latency from SQL queries are negligible. But for users accustomed to the Hong Kong website but have since traveled to Australia, they suffer from additional latency because they go to the .hk site which redirects to the HK server even when they're in Australia. The website is targeted at international students from Hong Kong so this is an significant issue for me. Instead of redirecting users to the closest web server based on the TLD, how do I redirect users based on their location? Currently I am using nginx, postgres and Django. Say I know how to estimate users' location based on users' IP addresses, what is my next step? At what level would I work on? What topic should I read up?

    Read the article

  • If fiber runs 1gig fine, are there any concerns when considering upgrading to 10gig transceivers?

    - by Eric
    We had fiber installed (connecting ~10 buildings) around 5 years ago and it has been working great. The initial setup involved Procurve 2848 and 2824 switches w/ 1gig transceivers. However, lately we have been considering upgrading our network both to increase bandwidth and possibly add VOIP. However, a lot of this is assuming that we can just use pop the existing fiber into 10gig XFP transceivers in better switches and call it a day. If the fiber works fine at 1G does that mean it should be fine for 10gig? If not, how can we confirm that our existing fiber trunks will work, preferably in an affordable fashion?

    Read the article

  • Sync clock on Windows XP machine to external (non-domain, non-workgroup) Windows Server 2008 R2 machine

    - by Eric
    I have two machines and I'd like their clocks to be in sync for various reasons. Machine 1 is an XP machine located in the office. Machine 2 is a VPS hosted by a third party running Windows Server 2008 R2. These machines are not in any kind of workgroup or on a domain together. They are completely separate machines. Machine 2 is currently syncing once a week to time.windows.com. The clock on Machine 2 does seem to wander a bit within that week interval. What I would like to do is have Machine 1 set its clock based on the clock of Machine 2. I have tried configuring w32tm on the XP machine. This is what I used for configuration: w32tm /config /syncfromflags:manual /manualpeerlist:"<ip address of machine 2>" However, whenever I issue the /resync command I get "The computer did not resync because no time data was available". I have made sure to start the windows time service on machine 2, and I have added firewall exceptions for UDP port 123. Is there something I need to configure on Machine 2 (other than just starting the time service) in order to get it to respond? Edit: I have also run w32tm /config /reliable:YES /update on Machine 2. I am still getting "The computer did not resync because no time data was available". Is there something else I'm missing?

    Read the article

  • IIS 7.x Application Pool Best Practices

    - by Eric
    We are about to deploy a bunch of sites to some new servers. I have the following questions about application pools: 1) It seems advisable to have an application pool per website. Are there any caveats to this approach? Can one application pool, for example, hog all the CPU, Memory, Etc...? 2) When should you allow multiple worker processes in an application pool. When should you not? 3) Can private memory limit be used to prevent one application pool from interfering with another? Will setting it too low cause valid requests to recycle the application pool without getting a valid response? 4) What is the difference between private and virtual memory limits? 5) Are there compelling reasons NOT to run one application pool per site? Thanks!

    Read the article

  • Can I temporarily leave other roles active when converting a 2008 R2 server to a hyper-v host?

    - by Eric
    I currently have a Windows 2008 R2 box that I want to convert to a hyper-v host. Currently I have the following running on it: File Services, Web Server (IIS), and Sql Server 2008 R2 with a few different DBs. In the long term, I'd like to move all of those over to the VMs that will be created. However, in the short term I'd like to leave them running on the server. Are there any complications/problems with leaving them running on the hyper-v server for a day or two? How long will those services typically go down during the addition of the hyper-v role? Right now my plan is to back up everything, enable the hyper-v role, set up VMs, and migrate stuff off of the host. However, if there is a good probability that something may cease to function I might need to migrate everything over to a temporary host before doing the conversion.

    Read the article

  • Running SEP scans with the SYSTEM account

    - by Eric
    I need to run Symantec Endpoint Protection scans on Windows 7 systems using the SYSTEM account. I know that I can run DoScan.exe to manually run a scan, and this works fine using a regular user account. Unfortunately, when I try to run DoScan as SYSTEM, the application exits immediately without running a scan. Is there a way that I can get this to work, or another application besides DoScan.exe that I should be using?

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >