Search Results

Search found 6064 results on 243 pages for 'usb 2'.

Page 17/243 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • [Windows] How do I preserve folder shares on a USB external drive?

    - by Brent.Longborough
    I'm using a WD Passport external hard drive with my notebook, and have a folder on this drive I need to share on my Windows network. Occasionally, when the drive is not plugged in, Windows appears to lose the shares, and I have to go in and share again. Does anyone have a good way to avoid losing the shares? Environment: Vista Home Premium, SP2 WD MyPassport USB-powered portable hard drive

    Read the article

  • Are there any USB flash drives or SD cards which use RAID or redundant storage for additional reliability?

    - by Luke Dennis
    I'm looking to get a fault-tolerant USB flash drive, which saves data to multiple independent locations, whether using RAID or some other means to back up data. Has a product like this ever been created, or are my only options to hack something together? (By the way: I'm aware that RAID doesn't prevent data corruption from software or the file system. I'm just looking for something that can handle one of the memory sticks going dead.)

    Read the article

  • How do I preserve folder shares on a USB external drive?

    - by Brent.Longborough
    I'm using a WD Passport external hard drive with my notebook, and have a folder on this drive I need to share on my Windows network. Occasionally, when the drive is not plugged in, Windows appears to lose the shares, and I have to go in and share again after it's plugged in again. Does anyone have a good way to avoid losing the shares? Environment: Vista Home Premium, SP2 WD MyPassport USB-powered portable hard drive

    Read the article

  • My USB bootable thumb drive, no longer boots on a single particular computer on which it previously worked

    - by LiamMeron
    I created a bootable drive, booting CrunchBang, about 2 months ago. About a month ago, I booted into it on another laptop. After shutting down, I have been unable to get it to boot on my own laptop, despite having worked previously. I can still boot into it on my desktop, and can also boot into it on all other computers that I have tried. If I plug it in when I am running Ubuntu, the Home and / folders mount, the only error being that for some reason my PC likes to try and mount the swap partition too, which naturally, gives an error. The BIOS settings are all still setup to boot from USB. When I boot, all I get is a black screen with the white cursor, it will stay there for as long as I leave it. If it is worth anything, I have GRUB loader installed on the drive. The partitions look a little odd, but I am rather unfamiliar with how they are dealt with. The first partition, /, is sdb1 and has the bootable flag. The second partition is an extended system, and is sdb2. The third partition, according to GParted, seems to be nested under the second. This is the swap partition, and it is sdb5 The fourth partition is my home partition and is sdb6 and is also nested under the extended system. The first and fourth partitions are ext4. I don't know if that helps, but the more info, the better accuracy, generally. Thanks. EDIT: I tried reinstalling GRUB on the drive, but that didn't work. However, when I reinstalled GRUB on my laptop, I did it with my USB thumbdrive in. This caused the GRUB updater to find the /boot folder and add the proper details into my laptop's GRUB loader. I could log into CrunchBang from my laptop's GRUB but I was still unable to boot directly to the drive. It looked like my BIOS is unable to find the bootloader. I am unable to install GRUB to a partition I just created, a /boot partition at the start of the drive, GRUB just doesn't allow it. I think I'm going to have to reinstall #! on my drive, which won't be a great loss as I haven't put much time into it.

    Read the article

  • Reading a ZFS USB drive with Mac OS X Mountain Lion

    - by Karim Berrah
    The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

    Read the article

  • Share USB devices between 32 bit and 64 bit systems

    - by Sreejith S
    The latest version of USBDeviceShare, the USB over IP software, supports sharing USB devices between 32 bit and 64 bit editions of Windows. A USB device plugged in to a 64 bit PC running 64 bit version of Windows can be shared and remotely accessed from a 32 bit PC and vice versa. Download USBDeviceShare USB over Network software from http://www.sysnucleus.com/usbshare/usbshare_download.html Keywords : USB over Ethernet, USB Server, Remote USB Access, Share USB

    Read the article

  • Detect if any USB drive is detected or if not using WinForm Application in Visual C#

    - by Pavan Kumar
    I want to do the following things in my application 1) I want to display whether any USB drive is inserted or not in my application to prompt the user to insert a USB drive. I just want to notify the user if any USB dirve is inserted else prompt him to insert one using a label or something (i want to avoid messagebox as it will keep appearing whenever a device is inserted or removed. It will be irritating for the end user) in my Visual C# WinForm Application. If any USB drive is present display "USB drive detected" in the label. The user may add one or more USB sticks but the status will remain same. When there is none then the status of the label will change to "No USB drives found.Please insert a USB drive". 2) When one or more USB drive is added the volume name with the drive letter for example "James(F:)" is added to the Combobox list. The combobox list also needs to remove the entry for the USB drive added in the list automatically when it is removed . So when there is no USB the list should be empty and the label will again prompt user to insert a USB stick or drive.

    Read the article

  • Detect if any USB drive is detected or not using WinForm Application in Visual C#

    - by Pavan Kumar
    I want to do the following things in my application 1) I want to display whether any USB drive is inserted or not in my application to prompt the user to insert a USB drive. I just want to notify the user if any USB dirve is inserted else prompt him to insert one using a label or something (i want to avoid messagebox as it will keep appearing whenever a device is inserted or removed. It will be irritating for the end user) in my Visual C# WinForm Application. If any USB drive is present display "USB drive detected" in the label. The user may add one or more USB sticks but the status will remain same. When there is none then the status of the label will change to "No USB drives found.Please insert a USB drive". 2) When one or more USB drive is added the volume name with the drive letter for example "James(F:)" is added to the Combobox list. The combobox list also needs to remove the entry for the USB drive added in the list automatically when it is removed . So when there is no USB the list should be empty and the label will again prompt user to insert a USB stick or drive.

    Read the article

  • Detect if any USB drive is detected or not using WinForm Application

    - by Pavan Kumar
    I want to do the following things in my application 1) I want to display whether any USB drive is inserted or not in my application to prompt the user to insert a USB drive. I just want to notify the user if any USB dirve is inserted else prompt him to insert one using a label or something (i want to avoid messagebox as it will keep appearing whenever a device is inserted or removed. It will be irritating for the end user) in my Visual C# WinForm Application. If any USB drive is present display "USB drive detected" in the label. The user may add one or more USB sticks but the status will remain same. When there is none then the status of the label will change to "No USB drives found.Please insert a USB drive". 2) When one or more USB drive is added the volume name with the drive letter for example "James(F:)" is added to the Combobox list. The combobox list also needs to remove the entry for the USB drive added in the list automatically when it is removed . So when there is no USB the list should be empty and the label will again prompt user to insert a USB stick or drive.

    Read the article

  • Troubleshooting a Windows 7 PC that wouldn't sleep

    - by NPE
    I have a new Windows 7 PC that wouldn't sleep (not just automatically, but also when specifically told to). The screen goes black momentarily, but within two seconds the machine comes back as if nothing has happened. I tried powercfg energy. This produces some errors quoted at the bottom of this post, plus some warnings about timer resolution. There are no USB devices connected other than wireless keyboard + mouse (Logitech MK250); I tried unplugging them to no effect. The motherboard is Asus P7P55D-E. powercfg lastwake says "Wake History Count - 0", which I take to mean that it never actually went to sleep. I dual boot into Ubuntu, and was having exactly the same problem on the Linux side. That turned out to do with USB 3.0, which I've now disabled in the BIOS. This has solved the problem on the Ubuntu side of things, but made no difference to Windows 7. Any suggestions? Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name Generic USB Hub Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8087&PID_0020 Port Path 1 USB Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name USB Root Hub Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8086&PID_3B34 Port Path USB Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_046D&PID_C52E Port Path 1,8

    Read the article

  • Can't figure out how to make Slitaz USB persistent

    - by Dennis Hodapp
    I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent. One told me to add "slitaz home=usb" to the syslinux.cfg file like this: append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb but it didn't work for me. http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically. custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008) does anyone know the best way to make the USB automatically persistent?

    Read the article

  • No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

    - by Mike
    I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

    Read the article

  • How to "restart/repair" an USB port?

    - by Click Ok
    My laptop has two USB ports, but one is broken, so I use a USB hub in the other good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detect the mouse and the keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... Is there some method, software, etc. to "restart/repair" the USB port without restarting the PC?

    Read the article

  • Can USB Hubs affect peripheral performance?

    - by Daniel Rasmussen
    Like many laptops, mine has 2 USB 2.0 ports. I'm looking to purchase a USB hub for my peripheral devices. I'm also planning on purchasing a laptop cooler with two USB powered fans, which connects to a USB port but can extend the plug, so it doesn't use one up. (Sorry for the poor description; see the link for a picture.) My questions are these: Can one plug 'too many' peripherals into a USB port? Can I plug my fans into a port, then the hub into the fans, then my keyboard and mouse, mic, and webcam into the extender..? Is it possible to draw too much power from a port? Secondly, will a USB hub affect the performance of any of my devices? I'm mostly worried about my mouse and keyboard. I like wired mice because I've noticed some lag in my Bluetooth mouse.

    Read the article

  • Can't figure out how to make Slitaz USB persistent

    - by Dennis Hodapp
    I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent. One told me to add "slitaz home=usb" to the syslinux.cfg file like this: append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb but it didn't work for me. http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically. custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008) does anyone know the best way to make the USB automatically persistent?

    Read the article

  • How to configure a Logitech USB headset on Fedora 14 [closed]

    - by Humble Debugger
    I have a Logitech USB headset http://www.amazon.com/gp/product/B003NREDG4 but I can't hear anything nor input anything through it. I am working on a Fedora 14 desktop. cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfebdc000 irq 51 2 [Headset ]: USB-Audio - Logitech USB Headset Logitech Logitech USB Headset at usb-0000:00:1d.0-2, full speed /sbin/lsmod | grep -c snd 14 lsusb Bus 008 Device 002: ID 046d:c529 Logitech, Inc. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:0a0b Logitech, Inc. ClearChat Pro USB Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Please advise

    Read the article

  • force connection using USB adapter

    - by James
    Hi all I am new to Linux, so even though this is probably a simple problem it remains unsolved after more then 3 hours of googling :-( I run running ubuntu 10.04 LTS on an Acer Aspire 5520G . the laptop has a wireless adapter, but since I wanted better range I got an Edimax EW-7711USN USB adapter. now , when running ifconfig I am able to see both adapters where as the laptop native adapter is listed as wlan0 and the usb adapter is listed as wlan1. but listing available networks from the wireless network applet , all the connection are listed under wlan0 , the usb adapter is costencly listed as disconnected. this is what I have been trying to do so far 1) ifconfig wlan0 down - I got disconnected from the net but still was not able to get the usb to connect 2) used the wireless connection dialog to connect to a hidden network with the usb adapter - I was able to connect to the network but with no Internet access 3) disable wireless using the laptop function button - both wireless adapters where disabled can anyone suggest a way to connect to to the wireless network using the USB adapter rather then the built in one ? Thanks

    Read the article

  • Need help making a bootable portable USB hard drive. [Utility I need will only create bootable CDs or USB flash drives]

    - by Sootah
    I've got a copy of Spotmau's Bootsuite 2012, which is an utterly fantastic tool. It has completely replaced Bart PE for me, and I relied on BPE for YEARS. Anyway, the issue I'm having is that the Bootsuite installer utility will only create bootable USB flash drives, or bootable CDs. The USB hard drive is detected as a hard drive instead of as a USB device, and as such I cannot use the included app to install to the USB HDD. Is there a way of either copying the files from a bootable flash drive to a USB HDD and making that work, or of taking an .ISO of the bootable CD and using that to make the portable HD bootable? The flash drives I've made of it are great as I can always have it with me [have 16GB dangling from my keychain. :) ], but my USB hard drive is FAR faster than any flash drive I have, so I'd like to be able to use that when I'm working out of my office or happen to have it with me.

    Read the article

  • USB 3.0 randomly disconnecting and reconnecting

    - by user1624552
    I had an old laptop that died so I have bought a new one. I have taken the 2.5 SATA hard drive from the old laptop and I have put it into an external 2.5 SATA enclosure usb 3.0 and I connect it to the new laptop. My new laptop has Windows 8 64 bit installed. When I connect the external hard drive to the new laptop throught USB 3.0 port, it gets randomly disconnecting and reconnecting continuously, even when I am not using it. Also happens if I connect to another usb 3.0 port. Also I have observed that If I connect the external hard drive to a USB 2.0 port instead of an USB 3.0 port all work ok, no randomly disconnection and reconnection occurs. It only happens when I connect it to an USB 3.0 port. Some ideas to solve this issue?

    Read the article

  • NO USB devices show in windows 8.1 device manager

    - by collusionbdbh
    Whatever I plug into my USB ports will get power and will charge but will not connect to the computer. I have restarted the computer several times, I re-installed the chipset drivers and still even a USB HDD will not show up under the device manager, not even as an unknown device. I believe this happened because I switched android adb to listen on tcpip rather than USB as this is when the USB ports stopped working. I have set it back to USB but that hasn't seemed to correct the issue. It seems to me that ADB has shut off detection of devices through USB and I am out of ideas and can't find anything useful online. I would prefer not to have to reinstall windows unless I really have to but it is looking like that is exactly what I am going to have to do. I am using windows 8.1. Thanks

    Read the article

  • How to get Bus and Device relationship for a /dev/ttyUSB

    - by Ernesto Campohermoso
    I need to write an script for restart USB dongles. I have all tools but I can't link my /dev/ttyUSBx to physical BUS and DEVICE. An issue is that I have three dongles with the same id vendor and id product. If I do lsusb the output is: Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 002: ID 80ee:0021 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub And I have attached it to: /dev/ttyUSB0 /dev/ttyUSB3 /dev/ttyUSB5 But I want to know which device is related with which Bus Device. By example I need to get the following: /dev/ttyUSB0 -> Bus 001 Device 006 /dev/ttyUSB3 -> Bus 001 Device 004 /dev/ttyUSB5 -> Bus 001 Device 007 I'm using Ubuntu Server 10.04 and I tested the tools: lsusb hal lsmod But I can't get the relationship.

    Read the article

  • Can't access external hard drives or thumb drives

    - by calden
    I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

    Read the article

  • Cannot update grub with paramters on live USB

    - by Nanne
    I have booted from a live USB ("Try Ubuntu"), that also has a persistent option set (I used LiLi to create one) to do some tests for this pcie hotplug issue I'm having. I'm trying to test some boot paramaters (like in this question) by doing this sudo nano /etc/default/grub sudo update-grub The problem is that that last command gives me this: /usr/sbin/grub-probe: error: failed to get canonical path of /cow. It looks like /cow is the file-system that is mounted on /, according to: :~# df Filesystem 1K-blocks Used Available Use% Mounted on /cow 4056896 2840204 1007284 74% / udev 1525912 4 1525908 1% /dev tmpfs 613768 844 612924 1% /run .... Is there a way for me to run update-grub?

    Read the article

  • How can I transfer files to a Kindle Fire with a Micro-USB cable?

    - by Jeff
    I'm running Ubuntu 11.10, and when I connect my Kindle Fire to my computer via micro usb, it is not recognized automatically. Other usb devices, such as my ipod and digital camera, are recognized just fine. It does not appear to be a usb power issue, since the Kindle Fire wakes up from sleeping when it is plugged in. I never get the message on the Kindle telling me it is ready to accept files from the computer, though. Here are the last 15 lines of dmesg after plugging the kindle in: jeff@prime:~$ dmesg | tail -n 15 [45918.269671] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [45929.072149] wlan0: no IPv6 routers present [46743.224217] usb 1-1: new high speed USB device number 5 using ehci_hcd [46743.364623] scsi8 : usb-storage 1-1:1.0 [46744.366102] scsi 8:0:0:0: Direct-Access Amazon Kindle 0001 PQ: 0 ANSI: 2 [46744.366356] scsi: killing requests for dead queue [46744.372494] scsi: killing requests for dead queue [46744.384510] scsi: killing requests for dead queue [46744.392348] scsi: killing requests for dead queue [46744.392731] scsi: killing requests for dead queue [46744.396853] scsi: killing requests for dead queue [46744.397214] scsi: killing requests for dead queue [46744.400795] scsi: killing requests for dead queue [46744.401589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [46744.407520] sd 8:0:0:0: [sdb] Attached SCSI removable disk And here are my mounted filesystems: jeff@prime:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 298594984 174663712 108763480 62% / udev 1407684 4 1407680 1% /dev tmpfs 566924 896 566028 1% /run none 5120 0 5120 0% /run/lock none 1417308 300 1417008 1% /run/shm /home/jeff/.Private 298594984 174663712 108763480 62% /home/jeff I should note that, since I got Dropbox working on my Kindle, the usb is no longer strictly necessary, but as a matter of principle I'd love to get it working.

    Read the article

  • Unable to format 16Gb Usb Disk

    - by akshay.is.gr8
    Whenever i try to format my 16 GB usb disk using gparted it does to formating and when it refreshes then show unknown. tried disk utility as well. disk utility was able to format it into FAT but files vanish web the disk is removed and attached again. edit: the disk format completes every time but when using gparted it immediately show Unknown type file system and disk utility show FAT but when the Disk is unplugged and then connected the files are not there. either way it is unusable.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >