Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 17/808 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Internet Timeouts with TP-Link TL-WN821N wireless usb stick - existing solutions dont work

  - by Sheena

  I'm running Ubuntu12.04 and I'm trying to get a TP-Link TL-WN821N to work. The solution from Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick didn't work for me. Neither has anything else... I've installed rtl8192cu as per instructions I found elsewhere to no avail. The symptoms I am experiencing are: When I plug in the device the PC can see and connect to wireless networks fine. The network I'm using has internet access and the signal strength is pretty strong. I can't ping and I can't browse the internet (timeout). Any ideas? I'm not sure what the next step would be or what information would be useful at this point.

  Read the article

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• Wireless Very slow with 13.10 and BCM4313

  - by RyanCheu

  I have a laptop with the BCM4313, and it was working perfectly in Ubuntu 13.04, but I recently upgraded to 13.10 and now my wireless performance is horrible. Initially it didn't work at all, but I removed the wl driver and use the brcmsmac driver instead. Now when I boot up it works at the start, but gets progressively slower. My Android device is reporting 10Mbps down/20Mbps up, but my laptop only gets 1up/down. Does anyone know a solution? I really need my wireless to work, is my best option to just reinstall on 13.04? Thanks!

  Read the article

• Wireless connect- Webcam activation- MBR repair/rebuild

  - by Rick

  Evening: I've NEVER had so much difficulty with Ubuntu. I got "Ubuntu Made Easy" and couldn't believe it hasn't done a damn thing to help solve the problems!!! #1. Since install of 12.04 I haven't been able to connect to wireless. Have done everything I can find/think of. Laptop indicates it's receiving wireless. Ran all updates, restricted extras, etc. NOTHING!! Tried to find how to activate built-in webcam (it worked when I installed O.S.) NOTHING; tried to find MBR repair/rebuild terminal command.. NOTHING!!! The book has has been useless, so far!! I really have to solve these problems, otherwise laptop and UBUNTU are worthless!!! Hope someone can help me out with any or all the problems I've listed. Sure would appreciate it!!!!!!!!!!! (laptop HP 2000-210US) Thanks: Rick

  Read the article

• Newb: First install of ubuntu, no wired or wireless

  - by Ienzo

  Ran 12.04 through a usb drive for a day or so, and had no issues outside of some latency that is more due to the lack of ram on my aspire one D255e than to OS. Had wireless running with no issue, and wired tested as working also. Ran the install and removed windows 7, wireless network is detected but ethernet is not, and neither gets connection. Disabled proprietary driver and rebooted, re-enabled driver and still neither. I know nothing of ubuntu yet! What do? _<

  Read the article

• Network topology for both direct and routed traffic between two nodes

  - by IndigoFire

  Despite it's small size, this is the most difficult network design problem I've faced. There are three nodes in this network: PC running Windows XP with an internal WiFi adapter.Base station with both WiFi and a Wireless Modem (WiModem)Mobile device with both WiFi and WiModem The modem is a low-bandwidth but high-reliability connection. We'd like to use WiFi for high-bandwidth stuff like file transfers when the mobile is nearby, and the modem for control information. Here's the tricky part: we'd like the wifi traffic to go directly from the mobile to the PC, as rebroadcasting packets on the same WiFi channel takes up double the bandwidth. We can do that with a manual configuration by giving the both the PC and the base station two IP addresses for their WiFi interfaces: one on a subnet shared with the mobile, and one on their own subnet. The routes on the PC are set up so that any traffic going to the mobile via WiModem goes through the secondary IP address so that return traffic from the mobile also goes through the WiModem. Here's what that looks like: PC WiFi 1: 192.168.2.10/24 WiFi 2: 192.168.3.10/24 Default route: 192.168.2.1 Base Station WiFi 1: 192.168.2.1/24 WiFi 2: 192.168.3.1/24 WiModem: 192.168.4.1/24 Mobile WiFi: 192.168.3.20/24 WiModem: 192.168.4.20/24 We'd like to move to having the base station automatically configure the mobile and PC, as the manual setup is problematic when you start having multiple mobiles and PCs. This means that the PC can only have 1 IP address and needs to be treated as being pretty simple. Is it possible to have a setup driven by DHCP on the base station that is efficient with bandwidth?

  Read the article

• BCM4313 Wireless on Ubuntu Server 12.04

  - by KJ Tsanaktsidis

  I'm trying to run an old netbook with Broadcom BCM4313 wireless as a print server with Ubuntu Server 12.04. Setting up the wireless without the GUI, however, is proving problematic. I do think however I've narrowed down the problem. I've tried both the wl driver (from bcmwl-kernel-source) as well as the (included) brcmsmac driver. With both of them, when I issue the command iwlist wlan0 scanning (eth1 for wl), I only see neighbouring networks- not my own. I believe this might be because my networks are n-only, but my neighbouring networks are mixed mode (I suspect this because the output of iwlist wlan0 scanning shows "Bit Rates" only as high as 54 Mb/s). Any ideas how to go about getting this thing to connect?

  Read the article

• 12.04 LTE wireless not working in Dell Insprion E1405

  - by Rey

  i have the windows XP media edition running on my Dell Inspiron E1405 with all the hardware working properly. Recently i wipe out the windows and installed the Ubuntu 12.04 LTE using the CD and the installation process completed successfully but my wireless stopped working after. computer wireless indicator turned off and i can't even do the wired connection as well. it is Broadcom BCM4311 adapter. i tried to download the driver from the dell website but they don't have the Linux version of the driver if its that causing the problem. i appreciate your help that can solve my issue. thank you.

  Read the article

• Ubuntu 12.04 wireless does not detect networks

  - by dudeitsdevin90

  I installed Ubuntu on a partition of my MacBook Pro. Wireless connections work fine when I switch to OSX, but the wireless networks are not even detected when I boot Ubuntu. I installed Wicd as a new network manager, but I'm still having the same problem. Ubuntu works on a wired connection though. I have searched the web for a solution... similar questions have been asked but I have not been able to find a way to fix this problem. Any help would be greatly appreciated.

  Read the article

• Slow internet connection with a Digicom Wireless 11n 300m (rt2800)

  - by beboka8

  After upgrading to ubuntu 11.10 the speed of my internet connection has considerably reduced. I surf on internet using a wireless usb adapter Digicom Wireless 11n 300m which works with rt2800usb driver. The fact is, on the installation cd there's no tracks of that driver but instead of it there is another one called rt2870 which I tried to load using ndiswraper, but it did not recognize any hardware. I'm not sure the solution of my problem is simply changing the driver, but I have no other ideas. Can anyone help me?

  Read the article

• Still no wireless after b43 with Dell Inspiron 1525 (Ubuntu 12.04)

  - by DanielleN

  So I followed the instructions here http://ubuntuforums.org/showthread.php?t=1974006 about how to solve this issue. It worked for a bit and then stopped. After doing a modprobe I could at least see my network and click on it but it would not connect (I can always see it if I look under the listed wireless networks under VPN Connections, however). I'm thinking, from what I read at least, the issue might be that my wireless switch was on during those first steps. Do I now have to undo the b43 install and do it again? Or is there something else I could try? I just made the switch to Linux yesterday, so I am hesitant at this point to mess with anything on my own. I should note now that it was installed by someone who knows what they are doing, so we are all good on that front.

  Read the article

• Windows Wireless Drivers - Install

  - by Justin Y.

  I have nearly ended my journey of making a dual-boot windows xp and ubuntu computer. Along with version 12.04, came the problem with my NetGear WNDA3100v2 wireless adapter. It wasn't compatible. My last step in my adventure is to install the software called Windows Wireless Drivers. I have internet access on my laptop and a flash drive. It would be preferable to receive a link to this program, because I see no link on the website, and I can't download it from the Ubuntu Software Center. Thanks.

  Read the article

• Setting up wireless drivers in Ubuntu 9.10?

  - by xdya

  I've just installed ubuntu to a notebook, deleting the windows xp that was installed before, so now nothing works I couldn't solve the problem of getting the blank screen with the versions 12.. and 10.. so now there is 9.10 installed, which works fine. Well, it boots up at least. I can't get working the drivers though. I'm totally new to linux, and I've read in some forums that in this version you have to install all of them yourself, because the system won't detect them automatically. Therefore I tried to find the drive for my wireless card, but actually I have no clue how to get it work. Could someone please help me out? So here are the specs: System installed as mentioned: Ubuntu 9.10 Computer: Acer Aspire 3100 Wireless according to laptop specs: 10/100 Fast Ethernet, Wake-on-LAN ready, Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED I would really appreciate some detailed description to setting up my internet Thanks!!

  Read the article

• Wireless hardware is not getting switched on in 12.04

  - by user89733

  I have recently installed ubuntu 12.04 in sony vaio VPCEH. And updated all the available updates through update manager. When i switch on the bluetooth/wireless (hardware switch), only the bluetooth is turning on. For wireless, it shows as "hardware disabled". P.S: It was working fine few days before. Suddenly It is not turning on. i just get an answer for this question while googling. just enter the following command in the terminal. "sudo rfkill unblock all" This will unblock all hardware ports. that's it!!!!!! :) It works,..

  Read the article

• Unable to enable wireless on a Vostro 2520

  - by Joe

  I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes Output of lspci > 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev > 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge > Graphics Controller (rev 09) 00:16.0 Communication controller: Intel > Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB > controller: Intel Corporation Panther Point USB Enhanced Host > Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther > Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: > Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) > 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root > Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point > PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel > Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) > 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller > (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 > port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel > Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network > controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet > controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express > Gigabit Ethernet controller (rev 07) Output of lspci -v 0:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at f7d0a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f7d08000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7d00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7d07000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 0558 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 40 I/O ports at f0b0 [size=8] I/O ports at f0a0 [size=4] I/O ports at f090 [size=8] I/O ports at f080 [size=4] I/O ports at f060 [size=32] Memory at f7d06000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Dell Device 0558 Flags: medium devsel, IRQ 11 Memory at f7d05000 (64-bit, non-prefetchable) [size=256] I/O ports at f040 [size=32] Kernel modules: i2c-i801 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) Subsystem: Dell Device 0016 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f7c00000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at e000 [size=256] Memory at f0004000 (64-bit, prefetchable) [size=4K] Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

  Read the article

• Wireless internet works on W7 and on University Network but is extremely slow at home

  - by Rick

  I'm using ubuntu 12.04 with an Atheros wireless card. My internet speed in W7 is great. My internet speed in Ubuntu 12.04 at a university network is great. My internet speed in Ubuntu 12.04 at my home network is really slow. Some solutions I have tried but didn't work: Disabling IPv6 Running the following code: sudo ifconfig wlan0 down sudo rmmod -f iwlwifi sudo modprobe iwlwifi 11n_disable=1 sudo ifconfig wlan0 up Thanks for the help!

  Read the article

• rt2800 wireless keeps disconnecting

  - by Matthew Fumi

  My HP dm1 laptop has a rt2800sta wlan driver. My wireless doesn't usually have a problem connecting to a network, yet sometimes it does. The biggest issue I have found is that when it does connect, it doesn't stay connected. It continually connects and disconnects to the network. Does anyone know why this is happening, and how I would go about fixing the issue? Thank you and look forward to trying your solutions.

  Read the article

• No firmware found for b43 wireless controlloer (BCM4318) on a Dell Latitude D610

  - by Stanton.Sculpture

  Trying to get my 03:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) working. I just reformated and installed 12.04 on this old Windows XP machine, and I don't know where to get the firmware for this. This is what I got when I typed sudo lshw -c network: http://pastebin.ubuntu.com/1041161/ Also, when I go to additional drivers in the system settings, no proprietary drivers show up. Any help I can get on this would be Great, Thanks!

  Read the article

• Newly installed DIR-615 - how to connect to the wireless?

  - by JK123

  I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

  Read the article

• Wireless Activity Monitoring for PCI DSS Compliance

  - by dkusleika

  In an effort to be PCI DSS compliant, I took a trustkeeper.net questionnaire. I failed the question that asks Is the presence of wireless access points tested for by using a wireless analyzer at least quarterly or by deploying a wireless IDS/IPS to identify all wireless devices in use? (SAQ #11.1) My only wireless access point is outside my firewall, so even if you cracked my wireless you couldn't get inside my domain (unless you crack that too). My firewall doesn't have IPS and I couldn't tell if it had IDS. I looked around for a wireless analyzer, but what I found was $500, which is a little pricey for my size business. And even if I got it, I'm not sure I would understand what it tells me. Surely there are smaller/less sophisticated businesses that take credit cards and have solved this. My questions are: What are the risks if someone were to crack my wireless? (Could they read all internet traffic? Just wireless traffic? Just use my internet connection?) And what is the best/cheapest way to test my connection point quarterly? Should I buy the $500 analyzer? Domain is Windows Server 2000. Firewall is Sonicwall Pro 2040. Router is 8 port D-link.

  Read the article

• wireless to wired internet

  - by Mark T

  My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

  Read the article

• Adding network share as the system account breaks Win7 backup to network

  - by ChrisBenn

  (On Win7 Ultimate x64 SP1) So I've been using Win7 backup to \192.168.0.100\Backup\main-desktop\ for awhile without issue. Yesterday I tried to setup crashplan to synchronize my dropbox folder and a network share. I then found out that crashplan, as it runs under the system account, can't see my user mapped drives. So I created a startup script net use O: \192.168.0.100\Documents /USER:192.168.0.100\username password and set it to run, on startup, after the network interface is up, as the system account. (the username & password are the same for the net use script above, the locally logged in user, and the explicit username/password entered in windows backup). I woke up this morning to find error flags from the windows backup and get "Network location cannot be used" (0x800704B3). If I disable the startup task & reboot then windows backup works fine. I'm not sure why having a mapped drive for another user is killing windows backup (same server, different folder). I can work around the issue by using another program to synchronize the two folders, but I'm completely in the dark as to why this happens (and it's 100% repeatable). Uninstalling the crashplan client doesn't change anything - it's the net use run under the system account that breaks win7 backup (to a network location).

  Read the article

• Crash after plugging in the Logitech H600 wireless transmitter

  - by SneezyDinosaur

  I recently bought the Logitech H600 Wireless Headset. When I plug in the USB wireless transmitter, Ubuntu 12.04 LTS crashes. How does that come and what do you suggest me to do? Same problem here, as soon as the H600 headset is plugged in 12.04 crashes. Relevant snip from /var/log/Xorg.failsafe.log is below, complete log can be found as a gist [ 2676.496] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [ 2676.496] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset' [ 2676.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2676.496] (**) Logitech Logitech Wireless Headset: always reports core events [ 2676.496] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event16" [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29 [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found keys [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard [ 2676.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.3/input/input16/event16" [ 2676.496] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 10) [ 2676.496] (**) Option "xkb_rules" "evdev" [ 2676.496] (**) Option "xkb_model" "pc105" [ 2676.496] (**) Option "xkb_layout" "us" [ 2676.497] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes. [ 2676.497] Backtrace: [ 2676.497] 0: /usr/bin/X (xorg_backtrace+0x37) [0xb7698637] [ 2676.497] 1: /usr/bin/X (0xb7510000+0x18c3ba) [0xb769c3ba] [ 2676.497] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb74ed40c] [ 2676.497] 3: /lib/i386-linux-gnu/libc.so.6 (0xb7155000+0x135d32) [0xb728ad32] [ 2676.497] 4: /usr/bin/X (XIChangeDeviceProperty+0x16c) [0xb7630b0c] [ 2676.497] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb3f4a000+0x634e) [0xb3f5034e]

  Read the article

• Wifi installation issues with a Sitecom 300N x2 Wireless Network dongle

  - by SlyrNemesis

  Linux newbie here, anyway so here is the problem, I run Ubuntu 10.10 and I have a Sitecom 300N x2 Wireless Network dongle with chipset 8192SU, I used ndiswrapper to install my Windows Wireless driver because Sitecom doesn't have a linux driver, it says hardware present but it doesn't find any Wireless networks, nor does it connect to one. What can I do? The command "dmesg | grep ndis" gave this output in the terminal: [ 9.999954] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 11.111901] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList' [ 11.111973] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists' [ 11.112099] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver' [ 11.112161] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMdl' [ 11.112220] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver' [ 11.112280] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool' [ 11.112339] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool' [ 11.112399] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeMdl' [ 11.112457] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMAllocatePort' [ 11.112515] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent' [ 11.112573] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMFreePort' [ 11.112631] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete' [ 11.112780] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes' [ 11.112848] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx' [ 11.112946] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx' [ 11.113017] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete' [ 11.113112] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority' [ 11.113200] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem' [ 11.113271] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem' [ 11.113342] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem' [ 11.113413] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList' [ 11.113481] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBind' [ 11.113547] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBindClass' [ 11.113613] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbindClass' [ 11.113680] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbind' [ 11.113742] ndiswrapper (load_sys_files:206): couldn't prepare driver 'net8192su' [ 11.148888] ndiswrapper (load_wrap_driver:108): couldn't load driver net8192su; check system log for messages from 'loadndisdriver' [ 11.365200] usbcore: registered new interface driver ndiswrapper [ 12.818573] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819183] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819796] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.820505] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821115] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821726] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822339] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822948] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.823560] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.824204] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy

  Read the article

• Can't connect to Wireless

  - by SimplyRed37

  Good day all! I hope you are doing good. I have performed a WUBI installation of 12.04 on my HP G62 laptop, which has an Atheros AR9285 wireless chipset. Everything works fine with my wired network connection. However, wireless is unable to connect to my wifi network. I enter the WPA2 key and then it attemps to connect, but eventually comes back, asking for the WPA2 key again, as if it was not good. All of the other laptops in the household are able to connect, using the same key (I configured them all, so I am 500% sure of the WPA2 key). Any idea as to what could be causing this? I can definitely post the output of CLI commands like "rfkill list" or "sudo lshw -class network", or "ifconfig". I have installed Ubuntu a few time but I am definitely still a newbie, but I am definitely computer savyy. Looking forward to suggestions . Thanks in advance !!! Dan...

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >