Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 170/468 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• Windows 7 can't identify network

  - by Carl Hörberg

  I use a Windows 7 machine to share my internet connection, but the one network interface which are connected to my local network is marked as "Unidentified network", the sharing works well anyway but because the interface can't be chosen as Home network i can't use the HomeGroup features etc. Do you know which requirements an interface has meet to identify a network in Windows 7?

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• What are the different ways of remotely connecting to your computer?

  - by Rogue

  I'll be leaving for uni soon and would like to know the different methods of connecting remotely to my home pc. I know about VPN but are there any other ways? Also how secure is each of this method as I wouldn't want snoopers on my home-pc especially when I'm away. Also can i set up a remote connection to start and shut down my computer My operating system is windows, but if linux is more secure i would be willing to switch.

  Read the article

• Why are my downloads up to ~1500KByte/sec only, when the ADSL connection locks at 13611Kbit/s?

  - by leladax

  No uploading is going on other than the overhead of downloading which appears to be not high for the abilities of the connection: Only about 30-40KByte/s when the router locks at 1012Kb/s and other direct uploads or uploading overheads can reach more than 100KByte/sec so I don't think it's a congestion at uploading that is doing it. Is there something I miss? Because I assume 13611Kbit/s should be ~1701Kbyte/sec. Is it an overheard at the ADSL level I don't understand? Could it be the ISP doing it? If it's active throttling it can't be on single connections since 2 high speed connections still go up to ~1500KByte/sec. It's not an example on torrents or other complex situations. The tests were on Ethernet, but I doubt the results would be different on wireless. I wonder if the settings of those connections at my end could be doing it, e.g. MTU settings, though I haven't touched the defaults of a common Realtek NIC.

  Read the article

• how to change new user computer domain and Files and Settings Transfer Wizard many computer?

  - by monkey_boys

  My company have more 100 computer in used but boss want to change name of all of computer but how to change them all about 100 computer? And any body have programs for used or programing skill please hekp me

  Read the article

• Is this anycast behaviour correct?

  - by etheros

  When connecting to an service provided using anycast, I am experiencing different behaviour depending on whether the request is made using TCP or UDP. With TCP, the request is made to address A, and the subsequent response also comes from A. With UDP however, while the request is made to A, the response comes from address B. Is this correct behaviour, or should the UDP response come from the same address it's sent to?

  Read the article

• How to secure a group of Amazon EC2 instances

  - by ks78

  I have several Amazon EC2 instances running Ubuntu 10.04 and I've recently started using Amazon's Route 53 as my DNS. The purpose of doing that was to allow the instances to refer to each other by name rather than private IP (which can change). I've pointed my domain name (via GoDaddy) to Amazon's name servers, allowing me to access my EC2 webservers. However, I noticed I can now access the EC2 instances which I don't want to be public, such as the dedicated MySQL Server. I was thinking Amazon's Security Groups would still be in effect when using Route 53, but that doesn't seem to be the case. Before I started using Route 53, I was thinking of having one instance run a reverse proxy, which would help protect the web servers behind it. Then IP-restrict all the other instances. I know IP restricting can be done using the firewall within each instance, but should I ever need to access them from another IP address, I'd need a way in. Amazon's control panel made it a breeze to open a port when necessary. Does anyone have any suggestions for keeping EC2 instances secure, but also accessible to their administrator? Also, what's the best topology for a group of EC2 instances, consisting of web servers and a dedicated database server, from a security perspective? Does having a reverse proxy server even make sense?

  Read the article

• XP - ping changes routing table?

  - by Corelgott

  Hey Folks, I have got a real strange behaviour with one of my XP-Sp3 machines. Setup: A Server in the lan (192.168.5.0) proviedes access to all roadwarriors in 10.8.0.0 The DCHP has a static route for all clients pronouncing 192.168.5.235 as gateway for 10.8.0.0 All Clients can ping & access the vpn-machines; everything works like a charm But one Xp-Sp3 is not willing to connect to them. It gets all the same routes as any other sytem in the lan and I trippel-checked - there are no static routes on this machine When I ping any 10.8.0.0 device from this machine, the first two packaged work like a charm; but the next two (and any package after them) fail and get lost. When I look back into the routing table: There is a new route; a special one just for the device I pinged, which points to the right gateway - but which wasn't there earlier... As Long as this route exists the machine can't ping anything on 10.8.0.0. But if I remove the route by hand: The next to ping packages work fine... Has anybody got an idea about that? Anybody every seen such a behaviour? Any hint / help / tip is greatly appreachiated! thx in advance Corelgott Ps: I attach an image of the cmd to clarify things - its in german, but reading a routing table shouldn't be that hard...

  Read the article

• Command or tool to display list of connections to a Windows file share

  - by BizTalkMama

  Is there a Windows command or tool that can tell me what users or computers are connected to a Windows fileshare? Here's why I'm looking for this: I've run into issues in the past where our deployment team has deployed BizTalk applications to one of our environments using the wrong bindings, leaving us with two receive locations pointing to the same file share (i.e. both dev and test servers point to dev receive location uri). When this occurs, the two environments in question tend to take turns processing the files received (meaning if I am attempting to debug something in one environment and the other environment has picked the file up, it looks as if my test file has disappeared into thin air). We have several different environments, plus individual developer machines, and I'd rather not have to check each individually to find the culprit. I'm looking for a quick way to detect what locations are connected to the share once I notice my test files vanishing. If I can determine the connections that are invalid, I can go directly to the person responsible for that environment and avoid the time it takes to randomly ask around. Or if the connections appear to be correct, I can go directly to troubleshooting where in the process the message gets lost. Any suggestions?

  Read the article

• Share ADSL Internet connection between two computers 40 meters away (straight) from each other

  - by dario_ramos

  I have a box with a working ADSL Internet connection. About 40 meters away (straight), in another house, there is another, older box. There are two houses in between. Would there be some practical way to supply an Internet connection to the older box? The neighbors are ok with us installing cables and stuff. I'd say wifi would not be practical, since the houses in between would weaken the signal too much. And using Ethernet cables might require a switch or router in between, due to Ethernet distance limitations. Advice?

  Read the article

• DNS server setting resets on reboot

  - by Vaibhav Bajpai

  I recently changed my physical location, and had to change my DNS server setting in network preferences. However my Mac reverts back to original DNS server IP address on each reboot and I have to manually change it everytime. How can I make my changes persist on reboot? I am running Snow Leopard 10.6.7 UPDATE This is has started to occur since the time I restored my entire system from TM backup.

  Read the article

• What to do if people can't ping me?

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• NATing with a single-homed machine possible?

  - by Harry

  I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

  Read the article

• Using iptables to block ALL outgoing traffic from one NIC?

  - by edanfalls

  Hi, I must pretty bad at Googling as this seems like a very basic question but I can't seem to find the answer anywhere... and man iptables is a very long read! I have two NICs - eth0 and eth1 - on a linux box and I want to block ALL outbound traffic (TCP and UDP across all ports) from one of the NICs, so that no traffic makes its way back up to the router. What is the command for this? I have only seen examples with specific ports. Thanks in advance.

  Read the article

• Several border firewalls in the same network

  - by nimai

  I'm currently analyzing the consequences of multipath connections for the firewalls. In that context, I'm wondering if it's really uncommon to have several firewalls at the borders of a network to protect it. The typical case I'd imagine would be a multihomed network, for which the administrator would have different policies for links from different (or not) ISPs. Or maybe even in an ISP's network. What would be the practical (dis)advantages of such a configuration? Could you provide an example of an existing topology using several border firewalls?

  Read the article

• Auto logon to internet provider

  - by user31673

  We use wireless internet access. The wireless is secured and to get an IP address, you provide the right key. That is setup just fine. However, on top of that, the first time we access the internet, a browser page appears and we have to enter a password. then we have access to the internet for a period of time. How can the password step be automated? I also have a web-based printer that doesn't work (except via USB connection) because it can't get out to the web. I can't change the router settings. Is there anything I can do to get the printer working and automatic the access?

  Read the article

• "Network is unreachable" When pinging google, can connect to internal computers on debian VM

  - by musher

  Similar to this SU question: "Network is unreachable" when attempting to ping google, but internal addresses work Actually, it's pretty much the same base issue. I went through that thread trying to find a solution, I changed my resolv.conf: before: domain [my work domain] search [my work domain] nameserver [my gateway] nameserver [my gateway2] I changed it to: after: domain [my work domain] search [my work domain] nameserver 8.8.8.8 nameserver 8.8.4.4 However, any time I reboot the computer the resolv.conf gets overwritten to the previous version (the 'before' above). The issues began after I installed virtualbox additions, X server and (specifically) LXDE: Cat of apt history.log: Start-Date: 2014-08-21 10:03:42 Commandline: apt-get install virtualbox-guest-utils virtualbox-guest-dkms Install: x11-xkb-utils:amd64 (7.7+1, automatic), libxaw7:amd64 (1.0.12-2, automatic), xfonts-utils:$ End-Date: 2014-08-21 10:03:56 Start-Date: 2014-08-21 10:18:39 Commandline: apt-get install lxde Install: desktop-base:amd64 (7.0.3, automatic), libgoa-1.0-0b:amd64 (3.12.4-1, automatic), lxmenu-d$ End-Date: 2014-08-21 10:21:52 Start-Date: 2014-08-21 10:26:40 Commandline: apt-get upgrade Upgrade: libio-socket-ssl-perl:am ifconfig on the guest: root@Peridot:~# ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:89:c9:20 og inet addr:172.31.2.102 Bcast:172.31.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe89:c920/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2281 errors:0 dropped:1 overruns:0 frame:0 TX packets:463 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:266507 (260.2 KiB) TX bytes:120554 (117.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) The adapter in VBox is a bridged adapter directly onto my ethernet connection; as are my other 2 VMs (which work) Other SU questions I've tried: "connect: Network is unreachable" in VirtualBox VM

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• Building a network at home, what cables to use (if any)?

  - by Faruz

  My house is currently in ruins and am building it. While doing so, I wanted to design a home network. My main objectives are surfing and HD streaming. The house is one-level, 100 sq/m (about 300 sq/ft), and one of the rooms is a safety room with Reinforced concrete walls. About a year ago, when I started planning, I thought about putting Cat 6 STP cables in the walls and create network points in the rooms. Should I use STP or FTP? I heard that STP is a problem regarding connectors and stuff. Is it really beneficial? Will it work OK if I transfer the wire together with the telephone line? Should I maybe go with WLan and count on 802.11n to enable me to stream HD across the house? is 802.11n that good?

  Read the article

• Linking two networks that have a common device

  - by Serban Razvan

  I recently bought a Samsung Smart TV having in mind to connect it to the Internet. Because my router is very far from it and not wanting to buy an expensive wireless for the TV, I created a homemade solution. I have the laptop (an smartphone and the PC) connected to the router which is connected to the internet. I shared the laptop's wireless connection to the ethernet port which I connected to the TV. So far, the TV is connected to the internet, but is there any way to make him part of the router's network instead of the 2 devices network (the laptop and the TV)?

  Read the article

• How to set local alias for a machine?

  - by Alex G.

  I would like to set an alias on my local PC for a network machine. I know that it can be done by adding an entry in the hosts file as long as the IP address of the machine is also specified. However, the problem is that IPs are dynamically assigned by a DHCP server so I don't know for sure the IP address. Is there a way to define just an alias based on the machine's network name? P.S.: I'm running Windows Server 2008 R2.

  Read the article

• Storage replication/mirror over WAN

  - by galitz

  Hello, We are looking at storage replication between two data centers (600km apart) to support an active-passive cluster design for disaster recovery. The OS layer will be mostly Windows Server 2003/2008 with some OpenSuSE Linux used for performance monitoring on VMWare or possibly XenServer. The primary application service to replicate is Nvision. Datacenter 1 will have two storage systems for local active-passive or perhaps active-active replication with Datacenter 2 used as a last resport disaster recovery site. We have a handle on most aspects, but I am looking for specific recommendations on storage platforms that can handle remote replication cleanly. Thanks.

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• lenovo x1 carbon windows 8 frequent wifi disconnect issue

  - by hIpPy

  I'm having frequent wifi disconnects on my Lenovo X1 Carbon Touch laptop. I got this laptop 2 months back and it has been happening ever since about 3-5 times a day and 10 times a week on average. I've Frontier Fios internet. Power connected or not does not matter. Once I get disconnected, I try below to connect again in that order: turn Airplane mode on and off, troubleshoot network problems windows troubleshooter), restart the laptop I'd find that the WiFi adapter would get disabled and sometimes windows troubleshooting would help but more than often I'd end up restarting the laptop. A week back, I upgraded my wifi network adapter drivers (now Intel, version 15.5.6.48, 10/3/2012). I still get disconnected frequently but turning Airplane mode on and off gets me connected again. So the driver update did help. Windows 8 is updated. None of the other devices (nexus, iphone phones, nexus7, ipad tablets) would have wifi issues when my laptop would get disconnected. config: Intel(R) Centrino(R) Advanced-N 6205 (WiFi network adapter) Microsoft Windows 8 Pro Microsoft Windows [Version 6.2.9200] x64-based PC LENOVO System Model: 3443CTO X1 Carbon Touch I recently noticed this log message When I got disconnected in event viewer: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x[XXXXXXXXXXXX]. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any idea?

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >