Search Results

Search found 6706 results on 269 pages for 'power supply'.

Page 170/269 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• Any experience with SATA SAS Interposer Cards?

  - by korkman

  Driven by the current price difference between SATA and SAS disks on one side and the potentially bad behaviour of SATA disks in bigger storage arrays on the other side, I have found so-called SATA-to-SAS interposer cards. Advertised as "seamlessly adding SAS capabilities to existing SATA disk drives", I wonder if anyone here has had some experience with these or similar products. The major benefits I can identify are the increased cable voltage (if all drives are SAS connected), the ability to power-cycle the drive and multipath (if desired). Obviously the SATA drive will still have to be RAID edition. The question is: Do these cards indeed increase the overall reliability of a storage system, or will failing SATA disks cause trouble nevertheless? Edit: I'm not asking for hypothetical answers, only actual experience please. I'm well aware that the typical 10k SAS drive is more reliable (and better performing) than 7200 SATA drives. But how does a nearline SAS, which is phyiscally the same disk as its SATA counterpart, compare to the SATA version with interposer?

  Read the article

• Trying to turn an WD Mybook 1TB to slave drive in PC

  - by Steph W

  Yes I realise that most external Hard Drives would not be transitioned into internal sitting Hard Drives, but unfortunately we broke the miniUSB connection that transfers the data from external Hard Drive to laptop. What we are TRYING to do now, is get the WD MyBook 1TB to funtion alongside (preferably as SLAVE) to my currently exsisting Desktop Hard Drive. both are SATA drives. We have the SATA power, and Data cables, and these are in place (but - somehow NOT working) - Help please - I am not computer illeterate, just don't know how to switch this so it works. How do I turn one into master, and the newer one (that was external) into the slave drive?

  Read the article

• Ubuntu 11.04 hangs at "checking battery state" while booting

  - by MisterSir

  When I try to boot Ubuntu 11.04, it just hangs when it gets to checking battery state. I know this issue is usually related to graphic drivers, but it worked like a charm for months now. Last time I was on Ubuntu I updated my system with the update manager, so maybe an update caused it. Anyway, I really need Ubuntu. I'm in the middle of work on a website and I have a deadline, so I need some help over here. Thanks. p.s. I tried reinstalling gnome-power-manager. Didn't work. And I'm not on a laptop.

  Read the article

• How can I determine what is causing SQL Server 2008 Express to hang Windows 7?

  - by thelaughingdm

  I have SQL Server Express 2008 installed on a Windows 7 (32-bit) developer workstation. Whenever I run an application that accesses SQL Server the Windows 7 shell hangs when the application closes. Applications like Windows Explorer and Task Manager become completely unresponsive. The task bar will not allow any interaction. The only way to recover the system is to power cycle. Two of the applications in use when this happens are NUnit and SQL Server Management Studio. NUnit always runs the unit tests that interact with the database fine. SQL Server Management Studio will sometimes cause the problem while trying to explore the database. The Windows event log does not show any events that are obviously connected to the problem. I have reverted and reinstalled SQL Server Express 2008 several times. What can be done to identify what is causing SQL Server Express 2008 to hang the Windows 7 shell?

  Read the article

• Decent 1gb switch (16-24 port) for rack...

  - by TomTom

  Hallo, for a rack containing a smaller nubmer of servers (5 at the moment, going to stay in this area), I look to replace the currently aging 100mbit switch with a 1gb switch. This is for the backend between the servers. I expect some ISCIS traffic there ,so a 10gbit option would be nice (preferably for two ports, as extension modules). I dont need management, this is a pure backend of an internal cluster. I do VLAN, but there is no sensible management the switch can do there. I wuold like: * 1he only, obviously * preferable limited moving parts. * Low price ;) * Enough power to run at least half the ports in full speed at the same time. Anyone any recommendations?

  Read the article

• Having trouble with a workaround, for booting from a usb stick, using grub and a minimal linux kernel to load usb drivers

  - by s hanley

  I'm trying to boot from a usb stick. I formatted it to fat32, and later to ext2, and installed dsl on it using unetbootin, and later the usb install guide on dsl wiki (http://www.damnsmalllinux.org/wiki/index.php/Install_to_USB_From_within_Linux). The bios doesn't have a setting for booting from usb. Grub doesn't "see" the usb drive when I use the root and find commands, explained in (http://www.damnsmalllinux.org/wiki/index.php/USB_Booting). This happens even when I set boot from floppy at the top of the boot order. However, my usb keyboard is recognised by the bios and by grub. How can it recognise the keyboard but not the usb drive? Also, the usb led does flash even before grub starts up, so surely something must be happening usb-wise? I am now following an ubuntu guide to booting from a USB stick, using a hdd-based, minimal linux kernel to supply the usb drivers. But I'm having difficulty adapting it to other OSes (slax/dsl/aptosid). I believe I have to alter the initrd.gz file to include usb drivers and then copy that file along with vmlinuz to a partition on my hdd. But, what's the grub command for the kernel line supposed to look like? From the ubuntu example it's: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper noprompt cdrom-detect/try-usb=true persistent initrd /boot/usb-boot/initrd.lz boot Should mine just be: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz cdrom-detect/try-usb=true initrd /boot/usb-boot/initrd.lz boot

  Read the article

• Why the different coarse threaded screws?

  - by Luke

  I'm seeing more and more of these screws (pictured below), which are almost triangular. I find I can only put them into Power Supplies and PCI(e) cards in cases, but they will break/strip away if I put them into a hard drive or a standoff for a motherboard Notice the triangular shape on it? On the Root Access chat, I started asking, but no concrete answer yet. I don't assume it's a production flaw, as I've seen hundreds and replaced them with the "proper" round screws. It is coarse-threaded, not fine-threaded (i.e. for a DVD drive or floppy drive). What are they for, and why do we need them instead of the regular round ones?

  Read the article

• USB-keyboard & mouse powered off in windows-7

  - by sinned

  I have a problem with a pc where usb devices are not getting any power as soon as windows starts up (it works in preboot). This pc has no ps/2, so there is no chance for input, also not in secure boot mode. I "tidied up" using sysinternals autostart, so there is a chance I messed something up here, although I'm quite sure I only deleted some old printer drivers from autostart. I do not know how to reset this, I cant even log in because there is no input possible. I could use a linux live cd, but I don't know what to do there because there is no sysinternals from linux into a not running windows... To make things even worse, I have the windows installation completely encrypted with truecrypt, so I haven't even tried windows recovery cd yet. There is no loss of data since I can access the disc with a live-linux, I only want to use it again without resetting up everything. Any suggestions?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How do you explain ethernet cable problems to non networking people?

  - by Bryan McLemore

  We've recently been doing a large network migration in our datacenter. We've had a few cables in this start to deliver really bad pings (in excess of 500ms on a LAN) before they could be replaced. The cables we were replacing weren't made the best. They where all hand made and the runs were so short on some of them that the bend radius was definitely too tight. Some of them ran in bundles right in front of the heat exhaust of the power supplies. The cables were running ok until we started pulling the ones surrounding them out. Then a few started having the problem I mentioned above degrading performance and causing reliability issues. I'm trying to figure out the best way to explain this to non networking people. Is there any documentation that people could recommend or other methods?

  Read the article

• Debian crashed, file system is read-only and cannot backup - How Do I find/mount a USB drive?

  - by Spiros

  We have a Debian server (vm's) here at work and the server crashed after a power failure. I can only boot the system in maintenance mode, and the whole file system is set to read only. I can run fsck though maintenance mode, however I would like to get a backup of some files before I do. Problem: I cannot access the net since there is no network connectivity in maintenance mode, and for some reason I try to add a USB flash drive to the computer but I can't find it through the console. Question: how to you find/mount a usb drive on Debian? I have tried several resources from the internet but nothing worked. Is there any other way I could get a backup of my files? I cannot start networking since the filesystem is set to read only. Any help would be appreciated.

  Read the article

• Sharepoint insists it knows the link to my UNC and won't let me remove hyperlink formatting

  - by ray023

  We have a file share at work (one I do not have the power to rename) and it contains a space in it: \\WorkFileShare\Visual Studio\SP1 I'm creating a Wiki Entry that informs users they can locate the VS2010 SP1 download on this Share. For some reason, SharePoint will highlight and hyperlink the UNC up to the space. (I've been dealing with this behavior for years in Outlook and I fix by putting focus on the character before the space and then hitting backspace to remove the formatting). Simple enough and SharePoint also removes the formatting when you backspace on the character before the space. However, as soon as I move away from the link, SharePoint goes right back to highlighting and hyperlinking what it thinks is the UNC. Naughty Sharepoint!! So does anyone have any idea how to clear the formatting? NOTE: Highlighting the text and clicking on the "Clear Format" icon does not work.

  Read the article

• I think my laptop just died

  - by Joel Coehoorn

  I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

  Read the article

• Streaming audio to headless linux box

  - by Ralph

  I have a dual boot (Win 7 + Ubuntu) PC connected via wifi with my music collection on a local HDD. I usually use Rhythmbox on Ubuntu or Winamp on Windows to listen to my music but I'll change if I have to. I also have a Raspberry Pi (low power PC running Debian) in the living room that is usually headless and connected via ethernet. The Raspberry Pi is also connected to my living room speakers via an amp. I would like to be able to stream music from my PC over the network to the linux raspberry pi. What software can I use to do this? Some sort of audio client\server?

  Read the article

• How to choose between Mac Laptop and Desktop

  - by Sakamoto Kazuma

  I am looking at getting a Mac soon for both iPhone development, and video editing. Should I be looking at a desktop or MacBook? I do not plan for the machine to move from my desk at home, so portability is not an issue, however it will be next to both a windows 7 desktop as well as a Linux laptop with dock. Main things that I'm concerned about is whether or not a MacBook has the power needed to do the video editing that I'm planning on doing and whether or not I can afford a desktop.

  Read the article

• Revert a VM client from within the VM Client - is it possible?

  - by Saariko

  I am creating a test VM client for our QA department. Once it's installed, my options will be: Use a snapshot Use non persistent disk on the hard disk. For either options, I can give the role of QA_DEP the ability to log to vCenter and go back/power-off the client - so they can return to their clean machine. My question: is it possible to have that ability without using vCenter? What If I want that on a Client reboot - it will return to it's initial/clean state? The clients are not gonna be heavy loaded.

  Read the article

• PC powers up but there is no display

  - by Matthew

  I built a computer with standard components I bought from Newegg about three years ago. It ran great for 2 years and has sat powered down for the last year. I tried to power it up today and the display was blank. It powers up, lights come on, drives start spinning but there is nothing on the display. I verified that the monitor and video adapter work. I also tried the video adapter in a different slot on the mother board with no luck. What's the next thing I should try? Is the mother board shot? Thanks.

  Read the article

• How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

  - by sky770

  Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

  Read the article

• oracle virtualbox doesn't work for host Kubuntu since Lucid Lynx 10.04

  - by 13east

  I have a thinkpad edge 14 core i3 2.4 ghz and 4g ram; I have tried kubuntu 10.04, 10.10, 11.10, 12.04 and 12.10 (all x64 architecture); Both oracle and ose virtualbox only works properly to install XP and windows 7 quest system on kubuntu 10.04; For every other kubuntu release since, the guest installation goes as far as formatting the virtual drive, freezes at this step, and doesn't even go as far as copying files to hard-drive to begin installation. But virtualbox has not stopped responding to commands; I can kill that one specific window with the problem installation ("machine" - "close" - "power off the machine") and start over again without having to force-kill virtualbox application. If anyone knows how I can go about addressing this problem, any help you can provide would be very much appreciated. Thank You.

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• Issue with broken disk on Solaris with raidctl - how to proceed

  - by weismat

  I have a SunFire T2000 server which has 2 mirrored disks pairs. The server required an exchange of the system battery. After swaping the battery first no disks were found. After booting from CD we managed to find the disks, but now one disk is broken and the raidctl reports a failed synchronisation. The boot process stops now when trying to mount the file systems. The power light of the broken drive is not even blinking. What is the best way to proceed now ? Fortunately I could live with loosing the data on the drive as it is backed up, but I would like to keep the rest of the data as it contains /etc and get the server booting again.

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• Samsung TV connected to PC for Powerpoint

  - by Skaughty

  I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >