Search Results

Search found 75434 results on 3018 pages for 'file manager'.

Page 1704/3018 | < Previous Page | 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711  | Next Page >

• Why does my ftp(e)s server fails like half of the time

  - by user1092608

  I have this discussion at work regarding our ftp server running via vsftpd. Initially, we have opted to serve ftpes instead of sftp because this seemed the most flexible and straightforward solution for our server to have secure file transmission. Afterwards, our ftp server seems to be a source of issues for our end users. Half of the time, users complain about not working ftp connections. I must say, i tested our FTP trough different infrastructures (=in the field, at random times at random places) and indeed, sometimes behind some configurations (=no idea how they are configured, because the 'field' testing), i recieve errors. Some of the are: Error: Failed to retrieve directory listing (filezilla) Furthermore, behind my basic home configuration, everything seems to be running fine. I (think I) did all the basic configuration checks (passive mode?, firewall for all ports?, ...) and can't seem to find the source. Being a bunch of techies at our small office, yet knowing nothing about infrastructure, some start suggesting that ftps protocol could be the source of issues. ("No, i only knew sftp so far" "Ftps is not widespread"). I, however, strongly doubt this hypothesis, since reading around on the www, asking questions on serverfault, everyone seems to deny this. So, as I would like to avoid reconfiguring, since this involves messing around in our SSH service, our virtual user setup and ftp service, i would need some advice on 1) what could be potentially the general cause? 2) do you have some general tips? 3) would you mind having a look at my configuration file? ----- General Settings ----- write_enable=YES dirmessage_enable=YES nopriv_user=ftpsecure ftpd_banner="Welcome to XXXX FTP!" hide_ids=YES hide_file=.* max_per_ip=10 max_clients=10 local_enable=YES local_umask=022 chroot_local_user=YES secure_chroot_dir=/usr/share/empty userlist_enable=NO userlist_deny=YES userlist_file=/etc/vsftp_deny_users guest_enable=YES guest_username=ftpvirtual virtual_use_local_privs=YES user_sub_token=$USER local_root=/srv/ftp/ftpvirtual/$USER anonymous_enable=NO syslog_enable=NO xferlog_enable=YES xferlog_file=/var/log/vsftpd_xfer.log connect_from_port_20=YES pam_service_name=vsftpd listen=YES listen_port=21 pasv_enable=YES pasv_min_port=30000 pasv_max_port=30030 pasv_address=foo ssl_enable=YES rsa_cert_file=/etc/vsftpd.pem rsa_private_key_file=/etc/vsftpd.pem force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES ssl_ciphers=HIGH anon_mkdir_write_enable=NO anon_root=/srv/ftp anon_upload_enable=NO idle_session_timeout=900 log_ftp_protocol=NO dsa_cert_file=/etc/vsftpd.pem Thanks

  Read the article

• What's the safest way to kick off a root-level process via cgi on an Apache server?

  - by MartyMacGyver

  The problem: I have a script that runs periodically via a cron job as root, but I want to give people a way to kick it off asynchronously too, via a webpage. (The script will be written to ensure it doesn't run overlapping instances or such.) I don't need the users to log in or have an account, they simply click a button and if the script is ready to be run it'll run. The users may select arguments for the script (heavily filtered as inputs) but for simplicity we'll say they just have the button to choose to press. As a simple test, I've created a Python script in cgi-bin. chown-ing it to root:root and then applying "chmod ug+" to it didn't have the desired results: it still thinks it has the effective group of the web server account... from what I can tell this isn't allowed. I read that wrapping it with a compiled cgi program would do the job, so I created a C wrapper that calls my script (its permissions restored to normal) and gave the executable the root permissions and setuid bit. That worked... the script ran as if root ran it. My main question is, is this normal (the need for the binary wrapper to get the job done) and is this the secure way to do this? It's not world-facing but still, I'd like to learn best practices. More broadly, I often wonder why a compiled binary is more "trusted" than a script in practice? I'd think you'd trust a file that was human-readable over a cryptic binaryy. If an attacker can edit a file then you're already in trouble, more so if it's one you can't easily examine. In short, I'd expect it to be the other way 'round on that basis. Your thoughts?

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

• disable mystery programs running at startup

  - by pstanton

  Hi and sorry for the ambiguous title... I have a few programs that should run at startup which are 'properly' configured to do so via adding shortcuts to the startup directory: C:\Users\[me]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup However I have (at least) 4 programs which are also starting up, which I can't find where they are configured or how to disable them. I have tried to find them in the above folder, as well as in the 'startup' section of 'msconfig'. The programs include: Skype (for which I have disabled 'start when windows starts' in its options) Thunderbird (for which I cannot find any option to run-at-startup) Task manager (as above) and some anonymous call to javaw (can't find any more details but it fails anyway) The other strange thing is that it seems like these (at least skype and thunderbird) are running 'as administrator' ... i have deduced this because I am unable to use the file-drag-and-drop feature in both (which is a known problem when running 'as administrator'). If someone could guide me to where these extra programs are configured to run-at-startup I would be very greatful! ps. my user account has the administrator role. EDIT: preferrably without another 3rd party tool...

  Read the article

• How can I get DVDs playing after a Vista to XP change?

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• GPG - why am I encrypting with subkey instead of primary key?

  - by khedron

  When encrypting a file to send to a collaborator, I see this message: gpg: using subkey XXXX instead of primary key YYYY Why would that be? I've noticed that when they send me an encrypted file, it also appears to be encrypted towards my subkey instead of my primary key. For me, this doesn't appear to be a problem; gpg (1.4.x, macosx) just handles it & moves on. But for them, with their automated tool setup, this seems to be an issue, and they've requested that I be sure to use their primary key. I've tried to do some reading, and I have the Michael Lucas's "GPG & PGP" book on order, but I'm not seeing why there's this distinction. I have read that the key used for signing and the key used for encryption would be different, but I assumed that was about public vs private keys at first. In case it was a trust/validation issue, I went through the process of comparing fingerprints and verifying, yes, I trust this key. While I was doing that, I noticed the primary & subkeys had different "usage" notes: primary: usage: SCA subkey: usage: E "E" seems likely to mean "Encryption". But, I haven't been able to find any documentation on this. Moreover, my collaborator has been using these tools & techniques for some years now, so why would this only be a problem for me?

  Read the article

• Are my web server permissions for uploading correct?

  - by user1699176

  I'm on debian and I have my website in the directory /srv/www/mysite.com/public_html I set chown for www-data:www-data on /srv/www. I have root disabled and created a sudo user which is id 1000:1000. I would also like to use this user to upload to /srv/www so I added my sudo user to the www-data group. I originally got a message saying that I didn't have permissions to upload a file to that directory. After playing around with multiple permissions for a while I finally was able to upload properly, but I'm not sure if this set up is correct. I'm hesitant to change it for now since it actually works, so I thought I'd ask for advice. I think what I ended up doing was this: sudo chown -R www-data:www-data /srv/www sudo chmod g+s /srv/www sudo usermod -aG www-data myuser sudo chgrp -R www-data /srv/www sudo chmod -R g+w /srv/www When I was finally able to successfully upload a file (with FileZilla) it showed the owner as myuser myuser. Shouldn't it have been www-data myuser? My question is whether this is correct and if there are any potential security issues? For example, I wasn't sure if I was actually supposed to use "myuser" to own the /srv/www directory instead sudo chown -R myuser:myuser /srv/www or maybe sudo chown -R www-data:myuser /srv/www If you need more info, let me know, thanks.

  Read the article

• Should I be able to Windows Phone 8 emulator running with this AMD config

  - by pete

  I have just bought a new system as follows * AMD A4-5300 Trinity 3.4GHz * Gigabyte GA-F2A55M-DS2 Motherboard I checked and the A4-5300 supports Virtualisation. I have run the SLAT checking tool and it says that my machine supports SLAT. Been into the BIOS and ensures that SVN is enabled. I have also run the coreinfo tool that indicates that SVN is not valid fort the machine nor is NPT.. not sure why this conflicts with the true BIOS setting (I checked with GIGABYTE and seems that NPT and NX are not options that can be set in the BIOS) But.. when I run the emulator I it hangs - I can see some activity in Hyper-V manager, but it doesnt get very far and no meaningfull error messages. Been working the plethora of suggestions to get around this, but so far, nothing has worked. My question is should this setup allow the WP8 emulator to run. I am positive the CPU supports virtualisation, but are there issues with the motherboard here? I have spent a huge amount of time on this so far....am I wasting my time with the current configuration, or should it work? thanks

  Read the article

• Bacula stops writing to disk volume after 2GB

  - by m.list

  Bacula Version: 5.2.5 I have configured bacula to write volumes to disk, however bacula stops writing to the volume as soon as it reaches 2gb. The file system is not an issue as I have stored files larger than 2gb. 06-Dec 17:22 backup-sd JobId 8421: End of Volume "Full-Monthly-0005" at 0:2147475577 on device "FileStorage" (/nfs/backup-pool). Write of 64512 bytes got 8069. 06-Dec 17:22 backup-sd JobId 8421: End of medium on Volume "Full-Monthly-0005" Bytes=2,147,475,578 Blocks=33,288 at 06-Dec-2012 17:22. backup1@backup:/nfs/backup-pool$ ls -alh Full-Monthly-0005 <br> -rw-r----- 1 bacula tape 2.0G Dec 3 16:14 Full-Monthly-0005 bacula-dir.conf: Pool { Name = Full-Monthly Pool Type = Backup Recycle = yes Volume Retention = 5 months Volume Use Duration = 1 day Maximum Volumes = 5 Maximum Volume Bytes = 12gb } bacula-sd.conf: Device { Name = FileStorage Media Type = File Archive Device = /nfs/backup-pool LabelMedia = yes # lets Bacula label unlabeled media Random Access = Yes RemovableMedia = no AlwaysOpen = no Label media = yes Maximum Volume Size = 12gb } In my original configuration Maximum Volume Bytes and Maximum Volume Size were not set at all and so should have defauted to no maximum but that did not work either.

  Read the article

• Youtube has no voice but the music continues just fine?

  - by Prix

  PC CONFIG: gigabyte EP45C UD3R with the realtek HD onboard 4gb dual channel Qcore 2.83ghz When i watch to videos on youtube now the voice some times is in static and some times so low that you can hear it while the sound continues just fine... For example if can hear to things like guitar or a train etc but the voice of whoever is speaking is gone or very low or pure static when watching the videos. I know some videos have a really great quality and some are HD 1080p so this was something not expected to happen. I can aswell play videos on my WMP11 just fine i have ccc-p installed also tried k-lite, both on the latest stable avaiable. I havent tried anything else related to flash but something is either wrong with my drivers or youtube. I have installed the latest drivers to make sure they are up-to-date but this didnt help either. What i have tried so far: removed the audio drivers and re-installed remove any codec pack i had and re-installed k-lite, test, didnt worked remove any codec pack i had and re-installed cccp, test, didnt worked checked the control panel sound configurations, tried chaging to phone stereo, to 5.1 which is what my headphone is. checked the realtek manager, tried changing the sound channels from 2CH to 6CH to reflect my headphone, didnt work. rebooted after every change of the above tries. tried chrome, firefox and internet explorer with the same results didnt w

  Read the article

• Force Installing a Radeon HD 2100 on Windows 8

  - by Click Ok

  I'm trying force installing a Radeon HD 2100 on Windows 8. I've found that link from AMD with the drivers for Windows7: http://support.amd.com/us/gpudownload/windows/legacy/Pages/legacy-radeonaiw-vista64.aspx I know too that AMD will stop support Radeon HD 400 and older: http://www.techspot.com/news/48321-amd-drops-windows-8-support-for-radeon-hd-4000-and-older.html Now, let's go to the problem. If I try install the 12.6 driver, Windows will stick with the "basic display adapter", and this is bad for 3d games like Minecraft, that runs really slow now compared with the previous Windows7 installation. Forcing install the catalyst driver can help to fix it. So, I follow that steps: Extract the Catalist Driver (C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql) Right click the "basic display adapter" on device manager, and "update driver" Search on PC I will choose the driver "With Disk" "C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql\Packages\Drivers\Display\W76A_INF" There is a big list of drivers and the nearest driver to HD 2100 is "Radeon HD 2350 Series" My questions: Why isn't "Radeon HD 2100 Series" listed? (or Where is it listed?) In theory it must be listed" The first link above show that "This article applies to the following configuration(s):" (...) "AMD Radeon HD 2000 Series" Am I doing something wrong?

  Read the article

• Debian: Unable to mount a second drive as a subdirectory inside of another partition.

  - by jkndrkn

  Hello. I have the following /etc/fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/md1 / ext3 defaults,errors=remount-ro 0 1 /dev/md0 /boot ext3 defaults 0 2 /dev/md5 /home ext3 defaults 0 2 /dev/md3 /opt ext3 defaults 0 2 /dev/md6 /tmp ext3 defaults 0 2 /dev/md2 /usr ext3 defaults 0 2 /dev/md4 /var ext3 defaults 0 2 /dev/md7 none swap sw 0 0 /dev/sdc /home/httpd ext3 defaults 0 2 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/sdc1 /mnt/usb/backup-1 auto defaults 0 0 I am unable to get /dev/sdc/ to mount at /home/httpd/ on reboot. The /home/httpd/ directory exists. Mounting via mount -t ext3 /dev/sdc /home/httpd works just fine. Mounting via mount -a generates the following error message: mount: you must specify the filesystem type This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.

  Read the article

• Using GPO to collect data about VMware view activity

  - by MoSiAc

  Our security group wants us to begin logging data for external access to our view enviroment. At first we thought that view security would be logging all source ip's that are external in nature so if for some reason there is an intrusion we would have record of it there. Of course our firewall logs all that information but correlating it to view is sketchy at best with our current implementation. We know on viewdesktops there is a set of keys in VolitateEnviroment that contains stuff such as source ip and username, etc. We have a script in place that, when run as a logon script attached to a user account in AD collects the information as we need it. If we have a GPO run the same script the information does not get collected. We feel like there is a piece of the puzzle we're missing but we don't know what. If anyone knows what we're forgetting or misconfiguring that would be great, or if you have a better way of us collecting external source ip's for view specifically we'd be interested in that as well. Thanks, EDIT CODE Batch script to dump to text file @echo off timeout 20 echo %computername%/%username% %time% %date% c:\vdi\vmware.txt echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~c:\vdi\vmware.txt reg query "HKEY_CURRENT_USER\Volatile Environment" /v "ViewClient_LoggedOn_Username"c:\vdi\vmware.txt reg query "HKEY_CURRENT_USER\Volatile Environment" /v "ViewClient_IP_Address"c:\vdi\vmware.txt echo.c:\vdi\vmware.txt VB Script to display values Const HKEY_CURRENT_USER = &H80000001 Set wmiLocator=CreateObject("WbemScripting.SWbemLocator") Set wmiNameSpace = wmiLocator.ConnectServer(".", "root\default") Set objRegistry = wmiNameSpace.Get("StdRegProv") sPath = "Volatile Environment" lRC = objRegistry.GetStringValue(HKEY_CURRENT_USER, sPath, "ViewClien_Machine_Name", vMachine) lRC = objRegistry.GetStringValue(HKEY_CURRENT_USER, sPath, "ViewClien_IP_Address", vIP) lRC = objRegistry.GetStringValue(HKEY_CURRENT_USER, sPath, "ViewClien_MAC_Address", vMAC) msgbox "The Remote Device Name is " & vMachine & " @ " & vIP & " (" & vMAC & ") " he wanted me to mention that the batch file actually runs and I can see it counting down when I reconnect but it does not grab the registry values.

  Read the article

• Backing up 80G hard drive 1G per day

  - by barrycarter

  I want to securely backup my 80G HD, but doing a complete backup takes forever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive. % After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system by restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work. % The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does this? In reality, I want to do this for multiple machines with multiple drives each, but think that solving the above will solve the general case.

  Read the article

• Checking for valid document files

  - by sweb

  I need a simple way to check if my files are valid documents (pdf, doc, docx, ppt, pptx, xls, xlsx, odt, ods, odp and etc). I can't use file because magic does not work well at all. For example, for PDF files, this is my output. sweb@sweb-laptop: /media/files/ebooks/PDF and CHM$ file --mime *. Pdf PHP 5 for Dummies. Pdf: application/pdf; charset=binary PHP 6 and MySQL 5 for Dynamic Web Sites. Pdf: application/octet-stream; charset=binary PHP6 and MySQL Bible. Pdf: application/pdf; charset=binary PHP6.pdf: application/octet-stream; charset=binary PHP and MySQL for Dummies SE. Pdf: application/pdf; charset=binary For example, I use abiword – which is a good tool – but it converts any format. It doesn't check for valid documents: abiword --to=txt --to-name=output.txt audio.mp3 Is there any command available to check for valid documents then?

  Read the article

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• Apache in MAC OS X

  - by Michal K.

  I have problems with apache on MAC OS Lion 10.7.5. I have VirtualHosts: <VirtualHost *:80> ServerName devel.dev DocumentRoot /var/www </VirtualHost> <VirtualHost *:80> ServerName test.dev DocumentRoot /var/www <Directory "/var/www"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have configured httpd.conf to ServerRoot = /usr/htdocs (empty directory). test.dev and devel.dev says always "It works!". Why ? In /var/www I have index.php which contains only one letter "k" (for tests). Edit, more info: I have restart apache milion times. File with VirtualHosts is included. error.log: [Tue Oct 02 20:03:55 2012] [notice] caught SIGTERM, shutting down [Tue Oct 02 20:03:55 2012] [warn] mod_bonjour: Cannot stat template index file '/System/Library/User Template/English.lproj/Sites/index.html'. [Tue Oct 02 20:03:55 2012] [notice] Digest: generating secret for digest authentication ... [Tue Oct 02 20:03:55 2012] [notice] Digest: done [Tue Oct 02 20:03:55 2012] [notice] Apache/2.2.22 (Unix) DAV/2 PHP/5.3.15 with Suhosin-Patch configured -- resuming normal operations When I stop apache, localhost still displays It works!

  Read the article

• Server taking too long to respond error

  - by DCJones

  Hi, This is my first post on serverFault and my first entry in to web server configuration. The hardware and software. CPU: GenuineIntel, Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz OS: Linux 2.6.18-128.el5 Memory: 2Gb Background. I am running a small database (MySQL), around 1000 records with each record containing 44 fields. At the start of each day “00:01” the tables are cleared and populated with fresh data. The are 10 remote PCs all running Winodws XP and Firefox internet browser. All remote PC’s are connected to the internet using a min 4Gb broadband connection. Each remote PC runs a URL which displays a dynamic page of data which is refreshed every 20 seconds. This is a continual process 24 hours a day. I problem I am having is on odd occasions throughout the day the PC browser error with “Server taking too long to respond error”. What I am trying to find our is if I have the correct setting in the httpd.conf file on the server. Any help or advice anyone can provide would be very helpful. Best regards Dereck Server config file: httpd.conf ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 254 MaxRequestsPerChild 4000 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0

  Read the article

• mod_rewrite with AJAX applictions: possible?

  - by MrJackV

  I am trying to run Shell In a Box (link) through another server (the computer running shellinabox is not accessible from the internet) . Ideally I could use ProxyPass in the Apache config to have a reverse proxy. Problem is I can't access the conf file. So I tried using .htaccess and I discover that I cannot use ProxyPass in there. So I tried and used mod_rewrite to do the job. Currently I have the following on the .htaccess file RewriteEngine On RewriteRule ^$ http://10.1.13.236:4200/ [P] However while it displays the title correctly and if I open up the source code I can see there is something in the page, nothing is diplayed on the screen (it remains blank). My suspicion is that there are problems with AJAX and this kind of proxy. What I am trying to accomplish with the mod_rewrite as close as possible behaviour to ProxyPass (Mirorr a website in a subdirectory). Is this possible? Is there some other solution (I tried phproxy and khproxy but neither of them is able to display anything)? Thanks in advance

  Read the article

• Is my current htaccess setting hurting SEO?

  - by user656002

  I have a site that I have redirecting to https. I do this to leverage wildcard SSL for my password protected pages. Everything seems to work fine with testing. For example, whether you type in http or www, you always get redirected to the SSL https... That said, I have about 200-300 external backlinks -- many high quality, yet google webmaster (along with SEOMoz), shows I have just 4... Huh? I'm embarrassed to say I just discovered this. This has led me to hypothesize that maybe my settings in htaccess is messed up, so google isn't recognizing a link because it's recorded on another site as http, instead of https. Maybe? At any rate, here is my simple htaccess setting for 301 www to http (The https redirect must be done inside the virtual host file--I think). I don't have anything in the htaccess file for https RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [L,R=301] Like I said, everything works fine for redirect over https, so I'd rather not screw up what works. On the other hand something is very wrong with google finding all my back links, so I need to fix something... I'm just wondering that maybe google isn't picking up a my backlinks from other websites recording me as http because I'm at https. Maybe google doesn't care and it's some other issue. Am I barking up the right tree? If so any quick fixes? Thanks as always!

  Read the article

• Cannot install SQL Server CE 4

  - by Manos Dilaverakis

  I'm trying to install SQL Server CE 4 on a WinXP Pro SP3 machine. I double-click on the file and absolutely nothing happens. There is nothing in the event viewer and the only effect I can see is the addition of an empty, randomly named folder in C:\ which looks something like C:\7c59aaeb5e43f6bdcb2430e923 I've tried this with both SQL Server CE 4 and the SP1 version. I've tried disabling the AV (Nod32) file protection but it didn't make a difference. I've checked the installed program list in case it's already installed, but I don't see it anywhere. I checked in C:\Program Files\Microsoft SQL Server Compact Edition\ and there's only the \3.5 folder in there from the already installed 3.5 version. Does anyone know what's going on or how I can further diagnose the problem? Edit in response to Ramhound: I have .NET 4 installed. Why, does it need a particular version? Edit in response to leinad13 I tried Process Explorer and filtered by the name of the temporary folder created. I see the following, but can't make much sense of it.

  Read the article

• Create new vms with a template with a csv. Possible?

  - by EdConde

  I am new to Powershell and Powercli... but i manager few ESX environments and really would like to do as much as possible via powershell. I am trying to do as much as i can via Powershell. On with the help I need: I used this one liner to create VMs from templates. But the problem is there has to be some user input after each new VM is created. New-VM name -Template template -VMHost VMHost -Datastore Datastore What i would like to do is be able to import via CSV the name of the new vm, the template to use, the host to put the new vm and the datastore all from a CSV. I don't know if it is as easy as below, but i kept getting errors. Import-Csv "C:\powershell\Data\VM2Create.csv" | Foreach-object{ New-VM $.name -Template $.template -VMHost $.VMHost -Datastore $.Datastore} I know there some () or {} or possibly | that need... just don't know where to put them... The csv i think would look like this: name, template, vmhost, datastore Any help or thoughts would be much appreciated...

  Read the article

• System Issues and Major Malfuctions after Failed hibernation Exit

  - by Sarah Seguin

  I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

  Read the article

• Hyper-V snapshots – unable to start VM

  - by ahmedz

  I restarted my Host server after shutting down three guest VMs. After I restarted the machine I tried to start the VMs and got an error stating the the VM failed to start. SERVERNAME failed to start. Attachment 'avhd file path' is read only. Please provide read/write access to the attachment. Error: 'General access denied error' SERVENAME failed to start. (virtual machine ID 17292200-wd22-dd22-d23-dddddd2222) The issue seems to be with the disk space. The VHD file for this VM is 128 GB and there are two AVHD files of 58 and 75 GB. Whereas the total disk space on this drive (E) is 280 GB - the free space is only around 23 GB. I understand that the error is caused by the unavailability of the required disk space. Unfortunately, I cannot increase the disk space on this drive. However I have another drive (D) that has 400 GB of free space. I exported this VM to D drive and then tried to add the copied AVHD files but it gives me a similar error. I am running Windows Server 2008 R2 Datacenter. Any help is appreciated.

  Read the article

< Previous Page | 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711  | Next Page >