Search Results

Search found 7599 results on 304 pages for 'auto versioning'.

Page 171/304 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • Windows Task Scheduler

    - by Zulakis
    i am trying to deploy a auto-starting program with Administrator Priviliges on our XP-SP1-machines. For this, i am using the Windows Task Scheduler. Since most of our machines get deployed by using a PXE-imaging-system, the Task fails because the Administrator user entered is for example r126/Administrator. If i only enter Administrator then it automatically changes to machinename/Administrator. Since the machinenames are automatically changes by the imaging-system, the tasks fail run. Any ideas on how to fix that?

    Read the article

  • Ubuntu on Oracle VirtualBox: Shared folders

    - by Rosarch
    I looked at this question, but it didn't help. I'm running Windows 7 as a host with Ubuntu 10.10 as a guest with VBox 4.0. I want to have a shared directory between the two. I have installed Guest Additions. I went to the VBox control panel in Windows, added a Shared Folder (sharename Shared_Folder), and chose "Auto Mount". A directory named "sf_Shared_Folder" appeared in /media on Ubuntu, but when I put files in that directory from an OS, I can't see them on the other one. I then tried to create a directory without automounting (sharename collectivefiles), and to run the following command: foo@foo-VirtualBox:~$ sudo mount -t vboxsf collectivefiles FileShare /sbin/mount.vboxsf: mounting failed with the error: No such device What is causing this error? I rebooted both the VM and VBox itself, but I'm still observing this.

    Read the article

  • Amazon EC2 Web server in Load Balancer gives 503

    - by dale
    we've been running our web servers at Amazon with load balancer and auto-scaling for over a year with no problem. All of a sudden today the request began to get aborted with the error: 503 ... Backend server is at capacity The web servers are at 1% CPU and no other alarms trigger. We use Amazons load balancer and nginx. Lots of requests like this are showing up in the access_log. 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.229.15.214 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.229.15.214 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" Any thoughts?

    Read the article

  • Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

    - by Panayiotis Karabassis
    I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

    Read the article

  • How to prevent these executables from starting up?

    - by TomWij
    After removing the following executables from starting up, in the near future they reappear again: DDMService.exe: Re-enabled when visiting a DivX video online. DivXUpdate.exe: Re-enabled when visiting a DivX video online. GoogleUpdate.exe: Re-enabled task, I think by Google Chrome? I see no auto-update option. iPodService.exe: Re-enables after starting iTunes. iTunesHelper.exe: Re-enables after starting iTunes, useless on SSDs. Reader_sl.exe: Re-enables when updating Adobe Reader, useless on SSDs. It bores me that these processes keep popping back up, while my software functions well without them. I'm smart enough to update the software weekly through FileHippo so I don't need automatic updates. What can I do to never see these processes again? Even after reinstallation of those applications... A general solution is also welcome! :-)

    Read the article

  • page up/down print ~ instead of history search in terminal

    - by Desmond
    I am on a Macbook Pro with mac os x 10.8.2 I have set: page up: \033[5~ page down: \033[6~ in terminal keyboard settings (pressing esc to get \033). My ~/.xinputrc is: # Be 8 bit clean. set input-meta on set output-meta on set convert-meta off # Auto completion options set show-all-if-ambiguous on set completion-ignore-case on # Keybindings "\e[1~": beginning-of-line # Home key "\e[4~": end-of-line # End key "\e[5~": history-search-backward # Page Up "\e[6~": history-search-forward # Page Down "\e[3~": delete-char # Delete key "\e[5C": forward-word # Ctrl+right "\e[5D": backward-word # Ctrl+left I am just following a guide found on internet (actually there are a lot of guide really similar): http://macimproved.wordpress.com/2010/01/04/fix-page-updown-home-end-in-terminal/ Unfortunately, the only (terrific) result is that when I press page up (fn + up arrow) just a "~" is printed in the terminal.

    Read the article

  • Automatically reboot Windows8 if no internet activity

    - by GrapeCamel
    I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Automatically reboot Windows8 if no internet activity [migrated]

    - by Patrick
    I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

    Read the article

  • Setting Rails up on a Linode - Nginx Issue

    - by rctneil
    I am extremely new to this so please don't shoot me down: I have set up a Linode running Ubuntu, It is all sort of working except Nginx. I am following this guide: http://rubysource.com/deploying-a-rails-application/ And this for nginx: http://library.linode.com/web-servers/nginx/installation/ubuntu-10.04-lucid When I go to my IP, I get a 500 internal server error. I have tried starting nginx and it looks like it starts fine. I run this: ps awx | grep nginx and I get: 308 ? Ss 0:00 nginx: master process /usr/sbin/nginx 2309 ? S 0:00 nginx: worker process 2311 ? S 0:00 nginx: worker process 2312 ? S 0:00 nginx: worker process 2313 ? S 0:00 nginx: worker process 2850 pts/0 S+ 0:00 grep --color=auto nginx I really am not sure what else to do to get it running. Any help? Neil

    Read the article

  • Using cd Command in Windows Command Line, Can't Navigate to D:\

    - by nicorellius
    This may be a stupid question, and I think I have looked elsewhere to find the answer... Might be a path issue, but when I open the command line and type from the C:\>: cd D:\ I cannot get to the D drive. Even if I type: cd D:\<folder name> The command.exe will auto-complete the line with the tab key, so it knows where I'm at. It just doesn't print to screen the result or actually get me there. This problem exists for the network drives as well. Now, if I use the chdir (cd) command like this: chdir D: or cd d: I get the print out of the D:\ below the command but it still says I'm in the C:\. I feel like I'm missing something simple.

    Read the article

  • Updating wordpress in a multi-node environment

    - by Peter
    I'm finding this very tricky in a multi node environment, with code under revision control. AKA. multiple frontends and single database. I have a deployment process that pushes a git repo to the servers, but obviously if I update Wordpress from within the admin panel, it will update the files to one FE. Then I would need to copy over the new files to the other FE nodes. Plus, whenever these changes are written when Wordpress updates on a node, it writes code into the git repo. As such, it then breaks the auto deploys that perform 'git pulls', as it then has untracked changes and refuses to pull in new deploys unless manually intervened. How does one easily keep Wordpress updated in a multi node (load balanced) environment?

    Read the article

  • LXC Container Networking

    - by digitaladdictions
    I just started to experiment with LXC containers. I was able to create a container and start it up but I cannot get dhcp to assign the container an IP address. If I assign a static address the container can ping the host IP but not outside the host IP. The host is CentOS 6.5 and the guest is Ubuntu 14.04LTS. I used the template downloaded by lxc-create -t download -n cn-01 command. If I am trying to get an IP address on the same subnet as the host I don't believe I should need the IP tables rule for masquerading but I added it anyways. Same with IP forwarding. I compiled LXC by hand from the following source https://linuxcontainers.org/downloads/lxc-1.0.4.tar.gz Host Operating System Version #> cat /etc/redhat-release CentOS release 6.5 (Final) #> uname -a Linux localhost.localdomain 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Container Config #> cat /usr/local/var/lib/lxc/cn-01/config # Template used to create this container: /usr/local/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.container.conf(5) # Distribution configuration lxc.include = /usr/local/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /usr/local/var/lib/lxc/cn-01/rootfs lxc.utsname = cn-01 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 LXC default.confu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:f #> cat /usr/local/etc/lxc/default.conf lxc.network.type = veth lxc.network.link = br0 lxc.network.flags = up #> lxc-checkconfig Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-2.6.32-431.20.3.el6.x86_64 --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: /usr/local/bin/lxc-checkconfig: line 103: [: too many arguments enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: /usr/local/bin/lxc-checkconfig: line 118: [: -gt: unary operator expected Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/local/bin/lxc-checkconfig Network Config (HOST) #> cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #> cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes TYPE=Ethernet IPV6INIT=no USERCTL=no BRIDGE=br0 #> cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 #> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 42:7e:43:b3:61:c5 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet 10.60.70.121/24 brd 10.60.70.255 scope global br0 inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 12: vethT6BGL2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether fe:a1:69:af:50:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::fca1:69ff:feaf:5017/64 scope link valid_lft forever preferred_lft forever #> brctl show bridge name bridge id STP enabled interfaces br0 8000.000c291230f2 no eth0 vethT6BGL2 pan0 8000.000000000000 no #> cat /proc/sys/net/ipv4/ip_forward 1 # Generated by iptables-save v1.4.7 on Fri Jul 11 15:11:36 2014 *nat :PREROUTING ACCEPT [34:6287] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Jul 11 15:11:36 2014 Network Config (Container) #> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp #> ip a s 11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 02:69:fb:42:ee:d7 brd ff:ff:ff:ff:ff:ff inet6 fe80::69:fbff:fe42:eed7/64 scope link valid_lft forever preferred_lft forever 13: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever

    Read the article

  • What does the the reconstruction process of mdadm do exactly on raid10

    - by Azrael
    I've got a system with 4 disks set up as raid10. All disks are usable, and mdadm all states them with UUUU. Due to a recent system crash, the raid is currently reconstruction the raid as it was marked as "not clean," and a reconstruction process was started. On a closer look smartctl shows problems on one disk: sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 24 cd 78 d4 sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed sd 0:0:0:0: [sda] CDB: Read(10): 28 00 24 cd 75 1e 00 04 00 00 With a research about the reconstruction process, I only found information concerning raid5 but nothing for raid10. Can I replace this problematic disk during the reconstruction process, or will I kill the raid with this?

    Read the article

  • How do I configure the Google Chrome / Chromium address bar to perform a search instead of trying to access a file on the local file system?

    - by Daniel Kauffman
    How do I configure the Google Chrome / Chromium address bar to perform a search instead of trying to access a file on the local file system? I would like to be able to enter a file name in the address bar and to see Google search results for that file name similar to what I would see if I searched for the file name using something like https://www.google.com/#q=/path/to/interesting/file I am able to disable the file scheme using either of the following policy settings: "DisabledSchemes": ["file"], Which has been deprecated in favor of: "URLBlacklist": ["file://"], But in either case Google Chrome / Chromium continues to auto-detect that a file name was entered, automatically prepends the file scheme to the file name, and then reports that the webpage is blocked.

    Read the article

  • Limit WSUS replication to only certain product classifications

    - by MDMarra
    I have four WSUS 3.0 SP2 servers that are geographically distributed. The server at our main site (we'll call it WSUS1), is the main WSUS server. All manual and auto-approvals happen here. The other three WSUS servers are replicas of this server. Currently, we are only controlling desktop OS updates through WSUS. I would like to control server OS updates through WSUS as well. There is no need for all of these server updates to be on WSUS servers at the remote sites. The only server that would need a copy of them is WSUS1. Is there a way to keep my current infrastructure as-is and add server OS updates only to WSUS1, even though the others are set up as replicas, or will I need to configure an additional WSUS server that's not replicated?

    Read the article

  • Error while mounting home directory on different logical volume

    - by RCola
    I created RAID 5 form 3 hard drives. Formatted as ext4 this raid array. Created VG0 group and lv_home logical volume in LVM. Then I tried to mount default /home directory on lv_home, while trying to mount logical volume lv_home to folder containing user profiles /home, getting error: mount: wrong fs type, bad option, bad superblock on /dev/mapper/VG0-lv_home next is seems to be symbolic link: # file -s /dev/VG0/lv_home /dev/VG0/lv_home: symbolic link to `../mapper/VG0-lv_home' then # file -s /dev/mapper/VG0-lv_home /dev/mapper/VG0-lv_home: data and lvm> pvs PV VG Fmt Attr PSize PFree /dev/md0 VG0 lvm2 a- 2.02g 68.00m lvm> lvdisplay --- Logical volume --- LV Name /dev/VG0/lv_home VG Name VG0 LV UUID WzJus7-2yV8-yhog-Ju1b-TpWH-IIAI-LIutwe LV Write Access read/write LV Status available # open 0 LV Size 1.17 GiB Current LE 300 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:0

    Read the article

  • Run ClickOnce Application from CLI

    - by Badger
    I am working on an auto-install script for where I work and we have a ClickOnce type application we use from a vendor. I have looked into it and we can't automate the install but we would like to be able to at least start the install automatically. I have tried rundll32.exe dfshim.dll,ShOpenVerbApplication "%SOFTWARE%\ToolsApp.application" but it gives me an error about an invalid URI. What would probably be the easiest is to use whatever program Windows has (Windows XP in our case) to run the default "handler" for the file. I don't know if any such thing exists, but that is what comes to mind.

    Read the article

  • Reccomendation for tuning 100's of SQL Databases

    - by wayne
    I'm running several SQL servers, each running a few hundred multi-gig databases for customers. They are all setup homogeneously as far as the schemas are concerned, however customer usages of the data differ quite a lot from database to database. What would be the best way to auto-index/profile/tune this large amount of databases? As there are at least 600 or more catalogs I cant have someone manually profile, and index as required by each databases usage patterns. I'm currently running SQL 2005 but will be moving to 2008, so solutions that work with either are fine.

    Read the article

  • Checking version of Applications installed in ~/Applications with unknown username

    - by ridogi
    I'd like to check the version of Firefox through Apple Remote Desktop of all managed computers. I have written this, but it only checks for Firefox in /Applications /bin/cat /Applications/Firefox.app/Contents/Info.plist | grep -A 1 CFBundleShortVersionString | grep string | sed 's/[/]//' | sed 's/<string>//g' For standard users Firefox auto update breaks if it is in /Applications so I instead have it installed in ~/Applications I'd like to check that copy (if it exists), but I can't specify the path in the command since it is unique to each computer. For example: /Users/jon/Applications/Firefox.app /Users/arya/Applications/Firefox.app Presumably I want to use find and pipe the result to my command. This should work for 10.6 through 10.8

    Read the article

  • Create room mailbox in Exchange 2007 - cannot view calendar

    - by David Neale
    I'm an application developer and I'm trying to play around with Exchange in order to integrate a room booking system with it. I've created a room mailbox and have set it so that it auto-accepts appointment requests. When creating an appointment as a standard user I can add the room as a resource and its availability will display. However, I can add it as a shared calendar to Outlook 2003 (Unable to display the folder. The Calendar folder could not be found) nor can I return the calendar folder using Exchange Web Services (again, could not find the folder). I've also created an appointment via Exchange Web Services with a room as a resource. The resource was successfully booked (as confirmed when opening it as the room's delegate) but it does not appear on the meeting as viewed by any of the attendees. Is there anything further I need to do in order to share this calendar? How do most organisations set up their Exchange with regards to rooms?

    Read the article

  • Is there a way to validate the presence of Javadoc and/or inline code comments?

    - by Chris Aldrich
    We are trying to put quality code processes in place for a large project I am working on. Right now a lot of developers are not putting in Javadoc or in-line code comments into their code. Ok right now. But it will severely hurt us in the very near future. We are using Maven 2.0.9 as our build tool, as well as Hudson for Continuous Integration. We are using Subversion as our source versioning tool/code repository, Rational Application Developer and Rational Softare Architect (essentially Eclipse) 7.5.1 as our IDE's, and then Subclipse as our Eclipse plug-in to connect to SVN. Is there a plug-in or a way to validate that a developer put in Javadoc and/or in-line code comments in order to allow a commit to SVN? This isn't intended to be a substitute for good code reviews, but merely a help to make sure that developers are reminded to add this documentation before committing. We are still intending on conducting code reviews that would also review documentation. Has anyone found any plug-ins for something like this? Any links? Any ideas?

    Read the article

  • Content div not filling up the remaining space

    - by Sameer Shariff
    Basically #content is not obeying the height: auto attribute. What am i doing wrong? <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title id="title" runat="server">AMIDS: Advanced Management Information Data Store</title> <style type="text/css"> #container { background-color: White; height: 100%; min-height: 100%; min-width: 600px; width: 100%; } #header { height: 50px; overflow: hidden; width: 100%; } #headerLeft { background-image: url('/Amids/App_Themes/Default/Images/HeaderLeft.jpg'); float: left; height: 50px; width: 5px; } #headerCenter { background-image: url('/Amids/App_Themes/Default/Images/HeaderCenter.jpg'); float: left; height: 50px; width: 99.2%; } #headerRight { background-image: url('/Amids/App_Themes/Default/Images/HeaderRight.jpg'); float: left; height: 50px; width: 5px; } #menu { background-image: url('/Amids/App_Themes/Default/Images/Menu.jpg'); height: 20px; width: 100%; } #content { background-color: Pink; height: auto; width: 100%; } #footer { height: 40px; overflow: hidden; width: 100%; } #footerLeft { background-image: url('/Amids/App_Themes/Default/Images/FooterLeft.jpg'); float: left; height: 40px; width: 5px; } #footerCenter { background-image: url('/Amids/App_Themes/Default/Images/FooterCenter.jpg'); float: left; height: 40px; width: 99.2%; } #footerRight { background-image: url('/Amids/App_Themes/Default/Images/FooterRight.jpg'); float: left; height: 40px; width: 5px; } * html #container { height: 100%; } * { margin: 0; padding: 0; } html, body, form { border: none; height: 100%; } </style> </head> <body> <form id="form" runat="server"> <div id="container"> <div id="header"> <div id="headerLeft"></div> <div id="headerCenter"></div> <div id="headerRight"></div> </div> <div id="menu"></div> <div id="content"></div> <div id="footer"> <div id="footerLeft"></div> <div id="footerCenter"></div> <div id="footerRight"></div> </div> </div> </form> </body> </html> Any ideas anyone?

    Read the article

  • Clustering with Vsphere and Apache load balacing

    - by Anonymous2011
    I was looking at Vsphere to automatically load balance my apache web servers, and mysql servers but will this actually do the job? I know it says it does auto load balancing but not actually sure it quite means what I want to achieve. Is there an easier way to set up a php-apache and mysql cluster within virtual machines? Or are there any guides to clustering? (I have tried googling without much luck) Any help towards understanding/setting up clustering and load balancing within virtual machines appreciated.

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >