Search Results

Search found 26523 results on 1061 pages for 'jack back'.

Page 171/1061 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• Does your organization still use the term "screens" to describe a user interface?

  - by bit-twiddler

  I have been in the field long enough to remember when the term "screen" entered our lexicon. As difficult as it is to believe, the early systems on which I worked had no user interface (UI), that is, unless one counts a keypunch machine and job listings as a user interface. These systems ran as "card image" production jobs back in a day when being a computer operator required a reasonably deep understanding of how computers worked. Flashing forward to today: I cringe every time I hear a systems practitioner use the term "screen." The metaphor no longer fits the medium. The term somewhat fit back when the user dialog consumed 100% of available monitor real estate; however, the term lost its relevance the moment we moved to windowed environments. With the above said, does your organization still use the term "screens" to describe an application's UI? Has anyone successfully purged the term from an organization? For those who do not use the term to describe UI dialog elements, what term do you use in place of “screen.”

  Read the article

• convert outline to text in illustrator

  - by Pai Gaudêncio

  howdy, how can i convert an outlined text back to editable text in adobe illustrator? thanks.

  Read the article

• Enable multiple audio output on Windows 7

  - by patrick

  For Windows 7, 64 bit: I have a digital SPDIF output to my stereo, which controls speakers in other rooms. I also have a set of speakers connected to the regular audio jack at the computer. This allows me to send music to the kitchen while my child plays games on the computer. Works great. Except when I'm playing games and still want to listen to music. ;-D I know I can manually switch WMP to play through the speakers instead of SPDIF, but I was wondering if there's any way to enable simultaneous audio out in Windows 7? Virtual Audio Card is a non-starter because I'm running 64 bits and the VAC driver isn't signed.

  Read the article

• Oracle as a Service in the Cloud

  - by Jason Williamson

  This should really be a Tweet, but I guess I'm writing a bit more. In theme of data migration and legacy modernization, I am seeing more and more of a push to consolidate data sources, especially from non-oracle to oracle in an effort to save dollars. From a modernization perspective, this fits in quite well. We are able to migrate things like Terradata, Sybase and DB2 and put that all into an Oracle database and then provide that as a OaaS (Oracle as a Service) Cloud offering. This seems to be a growing trend, and not unlike the cool RDS Amazon Database cloud being built on Oracle as well. We again find ourselves back in the similar theme of migration, however. The target technology sounds like a winner (COBOL to Java/SOA...DB2/Datacom/Adabas to Oracle) but the age-old problem of how to get there still persists. It it not trivial to migrate large amounts of pre-relational or "devolved" relational data. To do this, we again must revert back to a tight roadmap to migration and leverage the growing tools and services that we have. I'm working on a couple of new sections and chapters for a book that Tom and Prakash and I are writing around Database Migration and Consolidation. I'll share some snipits shortly.

  Read the article

• Failure to Boot Windows 7 after Ubuntu install

  - by Mike

  My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

  Read the article

• How can I get Windows 7 to remember program windows size and position?

  - by Ben

  I can open Outlook and it fills about half of the screen. I then maximize it to read some mail and then minimize it to do some other work. When I click on it again in the taskbar, it is back to the original size that it opened at. I have tried Ctrl-close and Ctrl-maximize but neither seems to work. This also happens with Explorer windows, AutoCAD, Revit, and other programs that I work with. Shouldn't a minimize and a maximize bring the window back to the last size and position?

  Read the article

• OS X 10.8.3 + attempt to change VPN settings = no more VPN access

  - by nicole

  I am running Mountain Lion and had gotten very tired of re-entering my password at random times when using my school's VPN network (I don't know much about these, but the type is Cisco IPSec according to the setup instructions I followed a while back). In an attempt to make life easier, I followed the instructions here, but, alas, any attempt to connect with VPN was met with the message "A configuration error has occurred. Verify your settings and try connecting again" (or something along those lines.) I then tried to do the steps in the blog post in reverse and change everything back. Upon (supposedly) doing that, though, a new error message came when attempting to connect to VPN: "The negotiation with the VPN server failed. Verify the server address and try reconnecting." Now I have no idea what to do. Is there a way to reset all VPN-related things in my system so that I can follow my school's instructions and just start over?

  Read the article

• Windows XP volume control spontaneously slides to zero

  - by Paul Dixon

  Was listening to a podcast in iTunes at my desk, left my desk briefly and as I sat down, the volume faded. If I scrolled the volume back up, using my keyboard or the volume tray icon, it would smoothly scroll back down again. I rebooted, same thing occurred. Figuring maybe I had a stuck keyboard or hitherto undiscovered mouse function, I unplugged each in turn. Volume still wanted to go to zero! Anyone know what might cause this? It's driving me nuts!

  Read the article

• cocos2d event handler not fired when reentering scene

  - by Adam Freund

  I am encountering a very strange problem with my cocos2d app. I add a sprite to the page and have an event handler linked to it which replaces the scene with another scene. On that page I have another button to take me back to the original scene. When I am back on the original scene, the eventHandler doesn't get fired when I click on the sprite. Below is the relevant code. Thanks for any help! CCMenuItemImage *backBtnImg = [CCMenuItemImage itemWithNormalImage:@"btn_back.png" selectedImage:@"btn_back_pressed.png" target:self selector:@selector(backButtonTapped:)]; backBtnImg.position = ccp(45, 286); CCMenu *backBtn = [CCMenu menuWithItems:backBtnImg, nil]; backBtn.position = CGPointZero; [self addChild:backBtn]; EventHandler method (doesn't get called when the scene is re-entered). (void)backButtonTapped:(id)sender { NSLog(@"backButtonTapped\n"); CCMenuItemImage *backButton = (CCMenuItemImage *)sender; [backButton setNormalImage:[CCSprite spriteWithFile:@"btn_back_pressed.png"]]; [[CCDirector sharedDirector] replaceScene:[CCTransitionFade transitionWithDuration:.25 scene:[MenuView scene] withColor:ccBLACK]]; }

  Read the article

• does windows incremental backup include system state backup?

  - by Kossel

  I'm managing my very small office server with windows server 2008. since I have only one server, and the user group is really small. I made the first hdd into 2 partitions. one (C:) for windows and Active directory, another (D:) for tomcat and database. I'm doing incremental back C: and D: daily to hdd2 (E:) using windows server backup. is it enough to let me do fully restore my server in case of disaster? I ask this because I have read there is also a system state backup, and I also have to do that periodically in order to get AD back? isn't it with incremental/full backup I can do full bare-metal recovery?

  Read the article

• Broadcomm WIDCOMM A2DP Quality Adjustment

  - by snicker

  So I got a sweet pair of bluetooth A2DP headphones for a sweet, sweet price (Motorola A805, if you were wondering). They sound great paired with an iPhone. However, when I pair with a computer using the latest and greatest WIDCOMM drivers, the quality is quite poor, almost un-listenable... clicking, popping, scratching. The remedy on one machine was using BlueSoleil, another bluetooth stack, as there is an adjustment for the Bitpool settings that allow you to jack the quality up. Sounds great. However, the bluetooth chipset in my other machine is not supported by BlueSoleil... so I'm stuck with the WIDCOMM stack. So the question is... Is there an undocumented way to turn up the quality for A2DP in the WIDCOMM drivers? first question on SU, usually lurking on SO.. =]

  Read the article

• Issues with Cinnamon?

  - by Corrodie

  I just recently switched my system over to Ubuntu 12.10, and decided on Cinnamon as my environment-- it all worked fine, at first. But I was poorly educated and started using Compiz and Emerald along with it--Setting both as replacements in startup processes. I now know, that's a big, big mistake. Now when loading Cinnamon, I am greeted to my background image, and only that. My only options seem to be to open a terminal. I was advised to attempt muffin --replace and mutter --replace Neither to any avail, the terminal closes, and I cannot load another one unless I completely reload. I went back to Unity, purged and autoremoved Cinnamon, emerald, and compizconfig, and attempted to reinstall Cinnamon, thinking that would solve the problem--no, it came back just as broken as before. So, I reinstalled ubuntu, then cinnamon---still broken. I'm assuming I must find a way to remove the replace commands-- but as I have no menu, I'm not positive I can do that. Is there any way I can access the startup processes via terminal? I'd think though, if I completely removed Cinnamon, all configurations would be gone too, so, it's just not making much sense. Is there some kind of reset I could possibly do? I've been browsing forums and questions here, all leading to things I'd already done, so, it can't hurt to ask for myself. I apologize if you would rather I have posted this over at mint. Next time, I will definitely check compatibility instead of assuming something just has to work. Any help is greatly appreciated, thanks! ****EDIT***** It seems although it didn't allow me to do it before, I was now allowed to access the settings and startup processes for Cinnamon via Unity, and, after quickly removing aforementioned processes- I'm up and running again.

  Read the article

• Google Chrome is in Danish

  - by Mad Cow

  I'm not sure what i have done, but by default, Chrome comes up in Danish. I can ignore this most of the time but its v annoying and i cant seem to change it. For example google directions come up in Danish too and have to be translated back to English! I have tried the spanner icon, and i've confirmed the only two languages specified are En and US English. Does anyone have any ideas how i can default it back to English all the time. In-lined the original screenshot from www.cow-shed.co.uk Thanks

  Read the article

• Cannot do sudo: "/etc/sudoers is mode 0740, should be 0440"

  - by dehmann

  I have a problem: I don't have a root password on my mac. I just have an Admin account, which can do stuff using sudo. Now, I wanted to add my normal user to the /etc/sudoers file as well. Since it did not let me write to that file (even writing using sudo), I did this: sudo chmod u+w /etc/sudoers That worked. But since then I can't do any sudo command anymore on my system. It complains that /etc/sudoers has the wrong mode: $ sudo touch /etc/sudoers sudo: /etc/sudoers is mode 0740, should be 0440 Segmentation fault It sounds like a bad joke, because now I can't even change the mode back to 0440: $ sudo chmod 0440 /etc/sudoers sudo: /etc/sudoers is mode 0740, should be 0440 Segmentation fault Is there any way to fix this situation? I need to get my sudo abilities back.

  Read the article

• Can I import contacts from an Exchange 2003 EDB file for a single user?

  - by Drarok

  We have recently had to reinstall a very unhappy Exchange 2003 server for a client, and whilst rebuilding their server we moved them onto a temporary one. During the course of all this, ExMerge was used due to Windows being so broken that none of the backup software could run. As a number of the user mailboxes were way over 2GB, we had to do date ranges of a few months at a time to avoid ExMerge's 2GB limit. We went back as far as 2006, as the files produced by ExMerge seemed empty that far back. Unfortunately, one of the users has reported that around 2 3rds of their contacts are missing, and that pre-2006 sounds about right for the missing items. Is there any way I can mount the old EDB file into Exchange, or otherwise read their contacts into a usable format? The server is running Windows Server 2003 SBS R2 (SP2), and Exchance 2003 (SP2, I think).

  Read the article

• With Slick, how to change the resolution during gameplay?

  - by TheLima

  I am developing a tile-based strategy game using Java and the Slick API. So far so good, but I've come to a standstill on my options menu. I have plans for the user to be able to change the resolution during gameplay (it is pretty common, after all). I can already change to fullscreen and back to windowed, this was pretty simple... //"fullScreenOption" is a checkbox-like button. if (fullScreenOption.isMouseOver(mouseX, mouseY)) { if (input.isMouseButtonDown(Input.MOUSE_LEFT_BUTTON)) { fullScreenOption.state = !fullScreenOption.state; container.setFullscreen(fullScreenOption.state); } } But the container class (Implemented by Slick, not me), contrary to my previous beliefs, does not seem to have any resolution-change functions! And that's pretty much the situation...I know it's possible, but i don't know how to do it, nor what is the class responsible! The AppGameContainer class, used on the very start of the game's initialization, is the only place with any functions for changing the display-mode that I've found so far, but it's only used at the very start, and i haven't found a way to travel back to it from my options menu. //This is my implementation of it... public static void main(String[] args) throws SlickException { AppGameContainer app = new AppGameContainer(new Main()); // app.setTargetFrameRate(60); app.setVSync(true); app.setDisplayMode(800, 600, false); app.start(); } I can define it as a static global on the Main, but it's probably a (very) bad way to do it...

  Read the article

• The Importance of Fully Specifying a Problem

  - by Alan

  I had a customer call this week where we were provided a forced crashdump and asked to determine why the system was hung. Normally when you are looking at a hung system, you will find a lot of threads blocked on various locks, and most likely very little actually running on the system (unless it's threads spinning on busy wait type locks). This vmcore showed none of that. In fact we were seeing hundreds of threads actively on cpu in the second before the dump was forced. This prompted the question back to the customer: What exactly were you seeing that made you believe that the system was hung? It took a few days to get a response, but the response that I got back was that they were not able to ssh into the system and when they tried to login to the console, they got the login prompt, but after typing "root" and hitting return, the console was no longer responsive. This description puts a whole new light on the "hang". You immediately start thinking "name services". Looking at the crashdump, yes the sshds are all in door calls to nscd, and nscd is idle waiting on responses from the network. Looking at the connections I see a lot of connections to the secure ldap port in CLOSE_WAIT, but more interestingly I am seeing a few connections over the non-secure ldap port to a different LDAP server just sitting open. My feeling at this point is that we have an either non-responding LDAP server, or one that is responding slowly, the resolution being to investigate that server. Moral When you log a service ticket for a "system hang", it's great to get the forced crashdump first up, but it's even better to get a description of what you observed to make to believe that the system was hung.

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Choppy USB mice on just one of USB ports

  - by user20532

  I've got Lenovo b560 laptop with latest, properly updated Kubuntu on it (11.04 natty, kernel 2.6.38-8-generic). It has three USB2.0 ports onboard. I usually plug a mouse into one of them (I've got 3 different mice - in office, at home and for when on the go). Sometimes, usually after laptop awakening from sleep, the mouse still works but cursor movements are choppy, as if the processor was extremely loaded (it's usually not). I found that if I re-plug the mouse cord into the other USB port, it works just fine. If I plug it back to problematic port, it is still choppy and remains choppy until next boot. Of course I want my mice to always work fine. Problem is: I cannot reproduce this behavior for sure, it happens sporadically but regularly. I use different USB ports (problem has ever happened on each of them since), I use different mice (each has failed me this way at least once), I cannot generally find what exactly is going wrong and why plugging to different port fixes the mouse instantly. So I'd like to hear at least clues where to look at, what to try to identify my problem. A bit of update: while beginning this post, I had the issue once again. I have just replugged the mouse back to problematic port and it is not recognized at all. On the other port it works smoothly.

  Read the article

• Seriousness of a "Smart" disk error. How long will it last?

  - by Workshop Alex

  I have an 1 TB data disk and the bios and Windows are reporting a "Smart" error. At least, I get a Smart event but it doesn't indicate how serious the failure could be. My system is about 6 months old, including the disk so the warranty will cover the damage. Unfortunately, I lack a second disk of 1 TB in size which I can use to make a full backup. The most important data on this disk is safe, but there's a lot of work data which can be regenerated but this would cost a lot of time. So I ordered an USB disk of 1 TB which will arrive in three days. By then I can make a full backup of the data and afterwards, it can crash. But will the disk live that long? (Well, I won't use the PC as long as I can't make a backup.) How serious is such a Smart event? I know it's serious enough to have it replaced, but will it live for another week or could it die any moment?Update: I purchased an 1 TB external disk and spent most of the day making a backup of the 1 TB disk. It survived that. I then received a new disk, since it was still under warranty and replaced the hard disk. Then I had to spend most of a day again to put back the backup. I need to send back the faulty disk and now have an additional external disk, which could always be practical. :-) The Smart Error report did not cause any failures on the original disk. I won't advise to ignore these warnings, but the disk still has enough life in it to last a few more days. (Just make sure you have a good back-up.) And oh, the horror of having to make a complete backup such a huge disk. :-) If your data is important, make sure you have something that supports incremental backups and lots of space. (In my case, the data wasn't very important, just practical to have on-disk together.)

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• Solaris at LISA 2011

  - by dminer

  As is our custom, the Solaris team will be out in force at the USENIX LISA conference; this year it's in Boston so it's sort of a home game for me for a change.  The big event we'll have is Tuesday, December 6, the Oracle Solaris 11 Summit Day.  We'll be covering deployment, ZFS, Networking, Virtualization, Security, Clustering, and how Oracle apps run best on Solaris 11.  We've done this the past couple of years and it's always a very full day.On Wednesday, December 7, we've got a couple of BOF sessions scheduled back-to-back.  At 7:30 we'll have the ever-popular engineering panel, with all of us who are speaking at Tuesday's summit day there for a free-flowing discussion of all things Solaris.  Following that, Bart & I are hosting a second BOF at 9:30 to talk more about deployment for clouds and traditional data centers.Also, on Wednesday and Thursday we'll have a booth at the exhibition where there'll be demos and just a general chance to talk with various Solaris staff from engineering and product management.The conference program looks great and I look forward to seeing you there!

  Read the article

• My iPhone is stuck at screen with USB cable and iTunes logo

  - by alex

  I just tried updating the iPhone's firmware, and things went haywire. iTunes informed the update had failed and linked me to this page. The iPhone is stuck on the image from the top of that page. I held down the sleep and home buttons until it turned off and turned it back on, and then went through the iPhone's 'restore' mode. It then error'd again and I'm stuck back with the logos on the iPhone. Does anyone know how to fix this? Thanks

  Read the article

• Prevent Windows 7 from installing a "critical" updates that crashes the system

  - by Sylverdrag

  I am running Windows 7 home premium. Up until yesterday, everything was going just beautifully, until I received a "critical update". As soon as the critical update was installed, the system became extremely unstable and froze up every few minutes requiring me to restart the system several times, with the same results. I used system restore to roll back the * update, and everything went back to normal... except that I keep getting a message telling me to restart the computer so that it can install this "critical update". There is no "don't install that crap on my machine" option. Disabling the updates doesn't change anything, turning off the windows update service doesn't change anything either, and being on Home premium, I have no access to the group policies. Any ideas of what can be done to prevent Windows from installing this update the next time I reboot?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >