Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 171/286 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• LAN connection suddenly domain_not_set.invalid

  - by Liam Coates

  I went to work today - internet fine as always. Came back, dreaded yellow triangle. I can connect wirelessly like i am now on my tablet. Thats completely fine. But through LAN I get the domain_not_set.Invalid message if I renew my IP for example. It seems I just don't have a DNS. But I have literally not touched anything no ones even been in the house. Hows that happen? Any help on why only wireless works would be great, I am gonna buy a wireless adapter tomorrow for the interim but I would like to know why. Thanks.

  Read the article

• How to route all traffic over site to site VPN tunnel?

  - by Hutch

  I have a site to site VPN configured between our main site (Site A) and a remote site (Site B). Site A is 10.60.0.0/16 Site B is 192.168.99.0/24 The firewall in Site B is a Juniper SSG running ScreenOS 6.3 and I'm using a route based VPN. The tunnel works perfectly in that from Site A you can reach 192.168.99.0 via the tunnel, and from Site B you can reach 10.60.0.0 via the tunnel. However, we want it so that if you're in Site B and want the Internet it goes via the firewall at Site A, and right now on the Juniper 0.0.0.0 has the ISP router as next hop. My understanding is that on the Juniper, I can set a route for the /32 public IP at our main site that the VPN tunnel connects to to the ISP router via ethernet0/0 (the SSG's external interface), and then modify the 0.0.0.0 route to use our main site firewall via tunnel.1 (the VPN tunnel). Not sure I've explained that so well but is my understanding correct? Thanks

  Read the article

• Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

  - by rick2047

  I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

  Read the article

• What is a 'firewall sniffer'?

  - by Craig Johnston

  What is a 'firewall sniffer'? How do they compromise the security of: Windows firewall Router firewall NAT firewall

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• No Internet for Created VLan on Cisco CE500

  - by Jennifer

  I'm new here and also with networking but i can't set internet conection for some vlan created. I have a Cisco CE500 switch and created 4 vlans define by the roles in the switch. Vlan 2: Servers (role) (port 3-4) Vlan 3: Desktop (role) (port 5-8) Vlan 4: Guest (role) (port 9-12) Vlan 1 is default, Connect to the ADSL Modem/Router Port 2 assign to the Router Role (vlan 1) The switch is connected on port2 the ADSL Modem (DHCP) 192.168.2.254 The goal is: All Vlan should have internet connection. Vlan 2 and 3 should see each other but not Vlan 4 I can enter the switch CLI but dont know which command to enter. Thanks 4 ur time and replies Jennifer

  Read the article

• Windows XP Blue-Screens And Reboots Instantly On Boot-Up

  - by ashes999

  My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

  Read the article

• How to connect to my US network overseas via VPN?

  - by GiH

  I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Remote desktop to multiple windows machines on a LAN with dynamic IP

  - by kevyn

  Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

  Read the article

• FTP error when doing file transfer

  - by Ernie

  I'm running vsftpd version 3.0.2 over FTPeS, and I'm having a bit of trouble with file transfers. It seems to work fine when I'm on the LAN, but not from an external IP address. I have the control port and data ports open on my server's software firewall and my router's firewall. When I'm using the service from an external IP address, it seems like sometimes a file transfer will complete, but it times out and I always get the client error: "426 Failure writing network stream". I've tried several clients. I'm thinking there is some sort of data sabotage either at the router or some server policy; maybe because I'm using passive ftp? Suggestions?

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• How to connect two subnet with Windows Server?

  - by 9dan

  Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

  Read the article

• Comunication from Server to Client + Client LAN

  - by Filipe YaBa Polido

  I'm having some trouble with some network setup. I've tried OpenVPN, SocialVPN, Hamachi, still it is not working. This is my setup: Server A: NIC 1 with internet public address, NIC 2 to LAN Client B PC: NIC 1 (192.168.10.2) connects to router 192.168.10.1 Client B Device: 192.168.10.3 (Configured via software, can't do much here) Problem: Server A must connect to cliente device B. (I can install software needed at Client B PC). However... I can't change the router to some model with VPN like Draytek or Cisco :( OpenVPN fails at bridging, PC B can ping Server A, but Server A can't ping Device B, only PC B. What else can I do?!?!?

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• Computer suddenly dies; screen displays weird flickering lines, then restarts

  - by Imray

  I've been having this terrible problem for a little while and just managed to get a picture of 'dead screen' for the first time and I am posting it to seek help. Randomly, at irregular intervals (typically once a week), while working on something (it's been different things every time) my computer will just suddenly go dead - the screen turns to exactly the picture below (the lines flicker a little bit), it hangs there for a few seconds and then restarts. Obviously this is extremely frustrating and I want to try to stop it. I've searched numerous postings with similar keywords but nothing exactly the same as mine. Does anyone have any idea what might be the cause of this? I would post all my system settings and installed programs but the list is long and I don't know how much relevance each item would be. If you'd like to know something specific, please comment and I'll let you know whatever you need. SPECS C:\Users\Imray>systeminfo Host Name: Imray OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free Registered Owner: Imray - Owner Registered Organization: Product ID: 00371-152-9333854-85895 Original Install Date: 06/09/1999, 5:45:21 PM System Boot Time: 22/03/2013, 8:58:18 AM System Manufacturer: Gateway System Model: DX4840 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~3201 Mhz BIOS Version: American Megatrends Inc. P01-A3 , 17/05/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume2 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 6,135 MB Available Physical Memory: 3,632 MB Virtual Memory: Max Size: 12,268 MB Virtual Memory: Available: 8,114 MB Virtual Memory: In Use: 4,154 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\Imray-OWNER Hotfix(s): 4 Hotfix(s) Installed. [01]: KB971033 [02]: KB958559 [03]: KB977206 [04]: KB981889 Network Card(s): 2 NIC(s) Installed. [01]: 802.11n Wireless PCI Express Card LAN Adapter Connection Name: Wireless Network Connection DHCP Enabled: Yes DHCP Server: 192.168.2.1 IP address(es) [01]: 192.168.2.13 [02]: fe80::1df1:5399:6890:91f6 [02]: Microsoft Virtual WiFi Miniport Adapter Connection Name: Wireless Network Connection 2 DHCP Enabled: Yes DHCP Server: N/A IP address(es) Graphics Card Specs Name ATI Radeon HD 5570 PNP Device ID PCI\VEN_1002&DEV_68D9&SUBSYS_E142174B&REV_00\4&18A4B35E&0&0008 Adapter Type ATI display adapter (0x68D9), ATI Technologies Inc. compatible Adapter Description ATI Radeon HD 5570 Adapter RAM 1.00 GB (1,073,741,824 bytes) Installed Drivers atiu9p64 aticfx64 aticfx64 atiu9pag aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64 Driver Version 8.700.0.0 INF File oem1.inf (ati2mtag_Evergreen section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1920 x 1080 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xDFFFFFFF Memory Address 0xFBDE0000-0xFBDFFFFF I/O Port 0x0000D000-0x0000DFFF IRQ Channel IRQ 4294967293 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6095, 181.00 KB (185,344 bytes), 06/09/1999 5:59 PM)

  Read the article

• Block a machine from accessing the internet

  - by Simon Rigby

  After some confirmation that I have thinking right in this scenario. We have a number of wired and wireless machines which presently have direct internet access. I also have a Linux (Ubuntu) server which is used as a file server for the network. Essentially I would like to be able to turn internet access on and off for machines. My plan is to block these machines by MAC address at the router. I would then set up a proxy server on the Linux box (ie Squid) so that the machines I wish to restrict can access the internet via the proxy. As I can adjust access via ACLs in squid, I would be able to switch on or off a machines access to the internet without having to further adjust the router's MAC rules. And of course I could go further and create a few scripts to assist with this admin task. Does this seem sound and have I over looked anything? Any help greatly appreciated. Simon.

  Read the article

• PC does not recognize XBox 360 controller connected through Play & Charge Kit

  - by Mike Cole

  I wanted to hook up my wireless XBox 360 controller to my PC running windows 7. I'm trying to use the Play & Charge kit since I already had that laying around. I plugged it in and Windows recognize it and installed it. It registers in Device Manager as "Xbox 360 Wireless Controller via Play & Charge Kit". The controller also has the 1st quadrant lit. However, I can't seem to make this work with any games. I installed the "Microsoft Xbox 360 Accessories" kit from MS website, and I run the Accessories Status app and it doesn't recognize that the controller is connected. Does anybody know what I'm doing wrong out there?

  Read the article

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• What are the essential considerations for setting up systems in a location with unreliable power?

  - by dunxd

  I deal with a lot of remote offices located in parts of the world where the local grid power supply is unreliable. Power can go off anytime with no warning, with outages ranging from minutes to days Power fluctuation is wild, with spikes and brown outs Currently the offices will have some or all of the following: A generator, with an inverter, or some sort of manual switch A big UPS or battery array connecting a number of devices Several smaller APC UPS with computers attached Low cost Voltage Regulators sometimes connected between mains and UPS or device. I know that each of these things needs to be appropriately rated for the equipment to which it is connected (although I am not sure how to calculate the correct rating). The offices will generally have the following equipment (in varying quantities): some sort of internet connection device (VSAT router, ADSL modem, WiMax router) Cisco ASA 5505 firewall a bunch of PCs printers one server I don't seek to replace the advice of an electrician, but in some of these locations they only answer the questions you ask them, so I need to make sure I have enough understanding of the essentials to protect equipment from damage, and possibly get through some power cuts.

  Read the article

• Connect two devices with ethernet

  - by mofle

  I have a MacBook Pro and I'm going to buy a Boxee Box. I have access to wireless internet, but it's slow and out of my control. So my question is, what is the best way for both devices to get internet access, and the Boxee Box to get SMB access to the Mac, when only the Mac is connected to the wireless internet? I'm thinking an ethernet cable from the Boxee Box to my Mac, and connection sharing on my Mac. Can you explain the setup, is there any configuring.

  Read the article

• Web Development - How to access custom host, defined in my hosts file, from another device in the same network

  - by Neara

  Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

  Read the article

• How to host ASP.NET application externally?

  - by Josh

  I have an ASP.NET application that I can get to locally by going to 192.168.1.102:81/TestApp. I would like to host the application externally by going to domain.com:81/TestApp (I already have my domain pointing to my router and this works fine - I have apache running on port 80 on another server). I modified the router settings to point any request coming through port 81 to 192.168.1.102. I am still having trouble accessing the ASP.NET site (I get the error message that "This link appears to be broken"). Am I missing something? How can I redirect domain.com:81/TestApp to my ASP.NET application? Thanks.

  Read the article

• Cannot connect to apache web server over internet

  - by user1658093

  I can access my apache 2.2 webserver from the lan ( at this case I use local IP aadress ) but I cannot connect externally ( from another network ). I changed apache to listen port 800, forwarded same port from router control panel, turned off windows and router firewalls. I use whatsmyip.com to get IP with what I try to connect. When I'm trying to connect I use : [whatsmyip.com IP]:800. Also, I can ping server IP externally. OS is windows7. Any ideas, suggestions? Thanks

  Read the article

• Dediced server for all network functions?

  - by Alan

  I want to set up a fictional network configuration for a school in my neighborhood. They have about 50 computers altogether, 2X20 in computer rooms for students and another 10 scattered around for various professors. They should all access the internet through a dedicated Linux router machine. What they would like is to have domain names for those three computer groups. Lab1, Lab2 and Professors. The computers in Lab2 and Lab1 should have static ip and should all be named by numbers. So there should be 1@Lab1, 2@Lab1.... etc. And the Professors network should have a DHCP, with authentication. Is it an ok solution to have all these functions on a single server? (The one which will be used as a router) Do I have to set a local DNS for domain naming? Do the host names for Lab computers have to be set on the clients, or can they be automatically assigned?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >