Search Results

Search found 14734 results on 590 pages for 'clear cache'.

Page 172/590 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• can't get texture to work

  - by user583713

  It been a while since I use android opengl but for what ever reason I get a white squre box and not the texture I what on the screen. Oh I do not think this would matter but just in case I put a linerlayout view first then the surfaceview on but anyway Here my code: public class GameEngine { private float vertices[]; private float textureUV[]; private int[] textureId = new int[1]; private FloatBuffer vertextBuffer; private FloatBuffer textureBuffer; private short indices[] = {0,1,2,2,1,3}; private ShortBuffer indexBuffer; private float x, y, z; private float rot, rotX, rotY, rotZ; public GameEngine() { } public void setEngine(float x, float y, float vertices[]){ this.x = x; this.y = y; this.vertices = vertices; ByteBuffer vbb = ByteBuffer.allocateDirect(this.vertices.length * 4); vbb.order(ByteOrder.nativeOrder()); vertextBuffer = vbb.asFloatBuffer(); vertextBuffer.put(this.vertices); vertextBuffer.position(0); vertextBuffer.clear(); ByteBuffer ibb = ByteBuffer.allocateDirect(indices.length * 2); ibb.order(ByteOrder.nativeOrder()); indexBuffer = ibb.asShortBuffer(); indexBuffer.put(indices); indexBuffer.position(0); indexBuffer.clear(); } public void draw(GL10 gl){ gl.glLoadIdentity(); gl.glTranslatef(x, y, z); gl.glRotatef(rot, rotX, rotY, rotZ); gl.glBindTexture(GL10.GL_TEXTURE_2D, textureId[0]); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertextBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawElements(GL10.GL_TRIANGLES, indices.length, GL10.GL_UNSIGNED_SHORT, indexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void LoadTexture(float textureUV[], GL10 gl, InputStream is) throws IOException{ this.textureUV = textureUV; ByteBuffer tbb = ByteBuffer.allocateDirect(this.textureUV.length * 4); tbb.order(ByteOrder.nativeOrder()); textureBuffer = tbb.asFloatBuffer(); textureBuffer.put(this.textureUV); textureBuffer.position(0); textureBuffer.clear(); Bitmap bitmap = null; try{ bitmap = BitmapFactory.decodeStream(is); }finally{ try{ is.close(); is = null; gl.glGenTextures(1, textureId,0); gl.glBindTexture(GL10.GL_TEXTURE_2D, textureId[0]); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); //Different possible texture parameters, e.g. GL10.GL_CLAMP_TO_EDGE gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); //Use the Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); //Clean up gl.glBindTexture(GL10.GL_TEXTURE_2D, textureId[0]); bitmap.recycle(); }catch(IOException e){ } } } public void setVector(float x, float y, float z){ this.x = x; this.y = y; this.z = z; } public void setRot(float rot, float x, float y, float z){ this.rot = rot; this.rotX = x; this.rotY = y; this.rotZ = z; } public float getZ(){ return z; } }

  Read the article

• Spring MVC working with Web Designers

  - by jboyd

  When working with web-designers in a Spring-MVC and JSP environment, are there any tools or helpful patterns to reduce the pain of going back and forth from HTML to JSP and back? Project requirements dictate that views will change often, and it can be difficult to make changes efficiently because of the amount of Java code that leaks into the view layer. Ideally I'd like to remove almost all Java code from the view, but it does not seem like this works with the Spring/JSP philosophy where often the way to remove Java code is to replace that code with tag libraries, which will still have a similar problem. To provide a little clarity to my question I'm going to include some existing code (inherited by me) to show the kinds of problems I'm likely to face when change the look of our views: <%-- Begin looping through results --%> <% List memberList = memberSearchResults.getResults(); for(int i = start - 1; i < memberList.size() && i < end; i++) { Profile profile = (Profile)memberList.get(i); long profileId = profile.getProfileId(); String nickname = profile.getNickname(); String description = profile.getDescription(); Image image = profile.getAvatarImage(); String avatarImageSrc = null; int avatarImageWidthNum = 0; int avatarImageHeightNum = 0; if(null != image) { avatarImageSrc = image.getSrc(); avatarImageWidthNum = image.getWidth(); avatarImageHeightNum = image.getHeight(); } String bgColor = i % 2 == 1 ? "background-color:#FFF" : ""; %> <div style="float:left;clear:both;padding:5px 0 5px 5px;cursor:pointer;<%= bgColor %>" onclick='window.location="profile.sp?profileId=<%= profileId %>"'> <div style="float:right;clear:right;padding-left:10px;width:515px;font-size:10px;color:#7e7e7e"> <h6><%= nickname %></h6> <%= description %> </div> <img style="float:left;clear:left;" alt="Avatar Image" src="<%= null != avatarImageSrc && avatarImageSrc.trim().length() > 0 ? avatarImageSrc : "images/defaultUserImage.png" %>" <%= avatarImageWidthNum < avatarImageHeightNum ? "height='59'" : "width='92'" %> /> </div> <% } // End loop %> Now, ignoring some of the code smells there, it's obvious that if someone wants to change the look of that DIV it would be neccesary to re-place all the Java/JSP code into the new HTML given (the designers don't work in JSP files, they have their own HTML versions of the website). Which is tedious, and prone to errors.

  Read the article

• When Clearing an ObservableCollection, There are No Items in e.OldItems

  - by cplotts

  I have something here that is really catching me off guard. I have an ObservableCollection of T that is filled with items. I also have an event handler attached to the CollectionChanged event. When you Clear the collection it causes an CollectionChanged event with e.Action set to NotifyCollectionChangedAction.Reset. Ok, that's normal. But what is weird is that neither e.OldItems or e.NewItems has anything in it. I would expect e.OldItems to be filled with all items that were removed from the collection. Has anyone else seen this? And if so, how have they gotten around it? Some background: I am using the CollectionChanged event to attach and detach from another event and thus if I don't get any items in e.OldItems ... I won't be able to detach from that event. CLARIFICATION: I do know that the documentation doesn't outright state that it has to behave this way. But for every other action, it is notifying me of what it has done. So, my assumption is that it would tell me ... in the case of Clear/Reset as well. Below is the sample code if you wish to reproduce it yourself. First off the xaml: <Window x:Class="ObservableCollection.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300" > <StackPanel> <Button x:Name="addButton" Content="Add" Width="100" Height="25" Margin="10" Click="addButton_Click"/> <Button x:Name="moveButton" Content="Move" Width="100" Height="25" Margin="10" Click="moveButton_Click"/> <Button x:Name="removeButton" Content="Remove" Width="100" Height="25" Margin="10" Click="removeButton_Click"/> <Button x:Name="replaceButton" Content="Replace" Width="100" Height="25" Margin="10" Click="replaceButton_Click"/> <Button x:Name="resetButton" Content="Reset" Width="100" Height="25" Margin="10" Click="resetButton_Click"/> </StackPanel> </Window> Next, the code behind: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.Collections.ObjectModel; namespace ObservableCollection { /// <summary> /// Interaction logic for Window1.xaml /// </summary> public partial class Window1 : Window { public Window1() { InitializeComponent(); _integerObservableCollection.CollectionChanged += new System.Collections.Specialized.NotifyCollectionChangedEventHandler(_integerObservableCollection_CollectionChanged); } private void _integerObservableCollection_CollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e) { switch (e.Action) { case System.Collections.Specialized.NotifyCollectionChangedAction.Add: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Move: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Remove: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Replace: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Reset: break; default: break; } } private void addButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.Add(25); } private void moveButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.Move(0, 19); } private void removeButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.RemoveAt(0); } private void replaceButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection[0] = 50; } private void resetButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.Clear(); } private ObservableCollection<int> _integerObservableCollection = new ObservableCollection<int> { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }; } }

  Read the article

• What does the `forall` keyword in Haskell/GHC do?

  - by JUST MY correct OPINION

  I've been banging my head on this one for (quite literally) years now. I'm beginning to kinda/sorta understand how the foreach keyword is used in so-called "existential types" like this: data ShowBox = forall s. Show s => SB s (This despite the confusingly-worded explanations of it in the fragments found all around the web.) This is only a subset, however, of how foreach is used and I simply cannot wrap my mind around its use in things like this: runST :: forall a. (forall s. ST s a) -> a Or explaining why these are different: foo :: (forall a. a -> a) -> (Char,Bool) bar :: forall a. ((a -> a) -> (Char, Bool)) Or the whole RankNTypes stuff that breaks my brain when "explained" in a way that makes me want to do that Samuel L. Jackson thing from Pulp Fiction. (Don't follow that link if you're easily offended by strong language.) The problem, really, is that I'm a dullard. I can't fathom the chicken scratchings (some call them "formulae") of the elite mathematicians that created this language seeing as my university years are over two decades behind me and I never actually had to put what I learnt into use in practice. I also tend to prefer clear, jargon-free English rather than the kinds of language which are normal in academic environments. Most of the explanations I attempt to read on this (the ones I can find through search engines) have these problems: They're incomplete. They explain one part of the use of this keyword (like "existential types") which makes me feel happy until I read code that uses it in a completely different way (like runST, foo and bar above). They're densely packed with assumptions that I've read the latest in whatever branch of discrete math, category theory or abstract algebra is popular this week. (If I never read the words "consult the paper whatever for details of implementation" again, it will be too soon.) They're written in ways that frequently turn even simple concepts into tortuously twisted and fractured grammar and semantics. (I suspect that the last two items are the biggest problem. I wouldn't know, though, since I'm too much a dullard to comprehend them.) It's been asked why Haskell never really caught on in industry. I suspect, in my own humble, unintelligent way, that my experience in figuring out one stupid little keyword -- a keyword that is increasingly ubiquitous in the libraries being written these days -- are also part of the answer to that question. It's hard for a language to catch on when even its individual keywords cause years-long quests to comprehend. Years-long quests which end in failure. So... On to the actual question. Can anybody completely explain the foreach keyword in clear, plain English (or, if it exists somewhere, point to such a clear explanation which I've missed) that doesn't assume I'm a mathematician steeped in the jargon?

  Read the article

• jQuery gallery scrolling effect with ease

  - by Sebastian Otarola

  So, I got this page from a friend and I think the gallery is amazingly done. Too bad it's in Flash ; http://selected.com/en/#/collection/homme/ Now, I'm trying to replicate the effect with jQuery. I've made all the loco searches on google one could think of. Zooming the picture is not a problem, the problem lies within the scrolling, how they come together at the ease part. I'm looking for solution in how to make the thumbnail animate when you scroll the page, they drag behind and infront of each other in a very subtle way - I've got (With a lot of help from Whirl3d in the jQuery-irc channel) this for the scrollup/down part of the mouse but the scrolling goes haywire; I Thought I post it here where I've come many times to get answers to a lot of questions and code-errors. This is my first post in stackoverflow and I know you guys are geniuses! Give it a shot! Thanks in advance! jQuery Part $(document).ready(function() { var fronts=$(".front"); var backs=$(".back"); var tempScrollTop, currentScrollTop = 0; $(document).scroll(function () { currentScrollTop = $(document).scrollTop(); if (tempScrollTop < currentScrollTop) { //Scroll down fronts.animate({marginTop:"-=100"},{duration:500, queue:false, easing:"easeOutBack"}); backs.animate({marginTop:"-=100"}, {duration:300, queue:false, easing:"easeOutBack"}); console.log('scroll down'); } else if (tempScrollTop > currentScrollTop) { //scroll up fronts.animate({marginTop:"+=100"},{duration:500, queue:false, easing:"easeOutBack"}); backs.animate({marginTop:"+=100"}, {duration:300, queue:false, easing:"easeOutBack"}); console.log('scroll up'); } tempScrollTop = currentScrollTop ;}) ;}); The HTML <html> <head> <link rel="stylesheet" type="text/css" href="style.css" /> <script type="text/javascript" src="http://code.jquery.com/jquery-1.7.2.min.js"></script> <script type="text/javascript" src="http://www.paigeharvey.net/assets/js/jquery.easing.js"></script> <script type="text/javascript" src="gallery.js"></script> <title>Parallax testing image gallery</title> </head> <body> <div class="container"> <div class='box front'>First Group</div> <div class='box back'>First Group</div> <div class='box front'>First Group</div> <div class='box back'>First Group</div> <br style="clear:both"/> <div class='box front'>Second Group</div> <div class='box back'>Second Group</div> <div class='box front'>Second Group</div> <div class='box back'>Second Group</div> <br style="clear:both"/> <div class='box front'>Third Group</div> <div class='box back'>Third Group</div> <div class='box front'>Third Group</div> <br style="clear:both"/> </div> </body> And finally the CSS Part .container {margin: auto; width: 410px; border: 1px solid red;} .box.front{border: 1px solid red;background-color:Black;color:white;z-Index:500;} .box.back {border: 1px solid green;z-Index:300;background-color:white;} .box {float:left; text-align:center; width:100px; height:100px;}

  Read the article

• NullPointerException using EndlessAdapter with SimpleAdapter

  - by android_dev

  Hello, I am using EndlessAdapter from commonsguy with a SimpleAdapter. I can load data when I make a scroll down without problems, but I have a NullPointerException when I make a scroll up. The problem is in the method @Override public View getView(int position, View convertView,ViewGroup parent) { return wrapped.getView(position, convertView, parent); } from the class AdapterWrapper. The call to wrapped.getView(position, convertView,parent) raises the exception and I don´t know why. This is my implementation of EndlessAdapter: //Inner class in SearchTextActivity class DemoAdapter extends EndlessAdapter { private RotateAnimation rotate = null; DemoAdapter(ArrayList<HashMap<String, String>> result) { super(new SimpleAdapter(SearchTracksActivity.this, result, R.layout.textlist_item, PROJECTION_COLUMNS, VIEW_MAPPINGS)); rotate = new RotateAnimation( 0f, 360f, Animation.RELATIVE_TO_SELF, 0.5f, Animation.RELATIVE_TO_SELF, 0.5f); rotate.setDuration(600); rotate.setRepeatMode(Animation.RESTART); rotate.setRepeatCount(Animation.INFINITE); } @Override protected View getPendingView(ViewGroup parent) { View row=getLayoutInflater().inflate(R.layout.textlist_item, null); View child=row.findViewById(R.id.title); child.setVisibility(View.GONE); child=row.findViewById(R.id.username); child.setVisibility(View.GONE); child=row.findViewById(R.id.throbber); child.setVisibility(View.VISIBLE); child.startAnimation(rotate); return row; } @Override @SuppressWarnings("unchecked") protected void rebindPendingView(int position, View row) { HashMap<String, String> res = (HashMap<String, String>)getWrappedAdapter().getItem(position); View child=row.findViewById(R.id.title); ((TextView)child).setText(res.get("title")); child.setVisibility(View.VISIBLE); child=row.findViewById(R.id.username); ((TextView)child).setText(res.get("username")); child.setVisibility(View.VISIBLE); ImageView throbber=(ImageView)row.findViewById(R.id.throbber); throbber.setVisibility(View.GONE); throbber.clearAnimation(); } boolean mFinal = true; @Override protected boolean cacheInBackground() { EditText searchText = (EditText)findViewById(R.id.searchText); String textToSearch = searchText.getText().toString(); Util.getSc().searchText(textToSearch , offset, limit, new ResultListener<ArrayList<Text>>() { @Override public void onError(Exception e) { e.toString(); mFinal = false; } @Override public void onSuccess(ArrayList<Text> result) { if(result.size() == 0){ mFinal = false; }else{ texts.addAll(result); offset++; } } }); return mFinal; } @Override protected void appendCachedData() { for(Text text : texts){ result.add(text.getMapValues()); } texts.clear(); } } And I use it this way: public class SearchTextActivity extends AbstractListActivity { private static final String[] PROJECTION_COLUMNS = new String[] { TextStore.Text.TITLE, TextStore.Text.USER_NAME}; private static final int[] VIEW_MAPPINGS = new int[] { R.id.Text_title, R.id.Text_username}; ArrayList<HashMap<String, String>> result; static ArrayList<Text> texts; static int offset = 0; static int limit = 1; @Override void onAbstractCreate(Bundle savedInstance) { setContentView(R.layout.search_tracks); setupViews(); } private void setupViews() { ImageButton searchButton = (ImageButton)findViewById(R.id.searchButton); updateView(); } SimpleAdapter adapter; void updateView(){ if(result == null) { result = new ArrayList<HashMap<String, String>>(); } if(tracks == null) { texts = new ArrayList<Text>(); } } public void sendQuery(View v){ offset = 0; texts.clear(); result.clear(); setListAdapter(new DemoAdapter(result)); } } Does anybody knows what could be the problem? Thank you in advance

  Read the article

• How do I expand my <div> to properly fit more vertical content?

  - by CSS_maniac

  Whenever I try to add margin-top: 30px to my box_1 and box_2 <div>, my bottom <div> gets pushed down and disappears. It seems like my wrapper wont expand to fit the content. How do I get a 30px gap between top and box_1/2 and bottom? <html> <head> <title>Circle Motion</title> <link rel="stylesheet" type="text/css" href="styles.css" /> </head> <body> <div id="outer-wrapper"> <div id="wrapper"> <div id="top"> </div> <div id="box_1"> <img src="chrome_400x400.png" /> </div> <div id="box_2"> <img src="firefox_400x400.png" /> </div> <div id="bottom"> <p>All Rights Reserved - CSS_maniac 2012 ©</p> </div> </div> </div> </body> </html> CSS /* My CSS */ html { height: 100% } body { background-color: grey; } #outer-wrapper { height: 100%; width: 1000px; margin: 0px auto; background-color: #EAFFDB; -moz-border-radius: 15px; border-radius: 15px; } #wrapper { height: 100%; width: 960px; margin: 0px auto; background-color: #EAFFDB; overflow: hidden; } #top { width: 900px; height: 110px; margin-top: 35px; margin-left: 30px; margin-right: 30px; background-color: white; -moz-border-radius: 15px; border-radius: 15px; } #box_1 { width: 430px; height: 430px; background-color: white; -moz-border-radius: 15px; border-radius: 15px; float:left; margin-left: 30px; text-align: center; } #box_2 { width: 430px; height: 430px; background-color: white; -moz-border-radius: 15px; border-radius: 15px; float:right; margin-right: 30px; text-align: center; } #box_1 img { margin: 15px 0px; } #box_2 img { margin: 15px 0px; } #bottom { width: 900px; margin: 0px auto 0px auto; text-align: center; background-color: white; -moz-border-radius: 15px; border-radius: 15px; clear:both; } /* Classes */ .clear { clear: both; }

  Read the article

• Problems with createImage(int width, int height)

  - by Jonathan

  I have the following code, which is run every 10ms as part of a game: private void gameRender() { if(dbImage == null) { //createImage() returns null if GraphicsEnvironment.isHeadless() //returns true. (java.awt.GraphicsEnvironment) dbImage = createImage(PWIDTH, PHEIGHT); if(dbImage == null) { System.out.println("dbImage is null"); //Error recieved return; } else dbg = dbImage.getGraphics(); } //clear the background dbg.setColor(Color.white); dbg.fillRect(0, 0, PWIDTH, PHEIGHT); //draw game elements... if(gameOver) { gameOverMessage(dbg); } } The problem is that it enters the if statement which checks for the Image being null, even after I attempt to define the image. I looked around, and it seems that createImage() will return null if GraphicsEnvironment.isHeadless() returns true. I don't understand exactly what the isHeadless() method's purpose is, but I thought it might have something to do with the compiler or IDE, so I tried on two, both of which get the same error (Eclipse, and BlueJ). Anyone have any idea what the source of the error is, and how I might fix it? Thanks in advance Jonathan ................................................................... EDIT: I am using java.awt.Component.createImage(int width, int height). The purpose of this method is to ensure the creation of, and edit an Image that will contain the view of the player of the game, that will later be drawn to the screen by means of a JPanel. Here is some more code if this helps at all: public class Sim2D extends JPanel implements Runnable { private static final int PWIDTH = 500; private static final int PHEIGHT = 400; private volatile boolean running = true; private volatile boolean gameOver = false; private Thread animator; //gameRender() private Graphics dbg; private Image dbImage = null; public Sim2D() { setBackground(Color.white); setPreferredSize(new Dimension(PWIDTH, PHEIGHT)); setFocusable(true); requestFocus(); //Sim2D now recieves key events readyForTermination(); addMouseListener( new MouseAdapter() { public void mousePressed(MouseEvent e) { testPress(e.getX(), e.getY()); } }); } //end of constructor private void testPress(int x, int y) { if(!gameOver) { gameOver = true; //end game at mousepress } } //end of testPress() private void readyForTermination() { addKeyListener( new KeyAdapter() { public void keyPressed(KeyEvent e) { int keyCode = e.getKeyCode(); if((keyCode == KeyEvent.VK_ESCAPE) || (keyCode == KeyEvent.VK_Q) || (keyCode == KeyEvent.VK_END) || ((keyCode == KeyEvent.VK_C) && e.isControlDown()) ) { running = false; //end process on above list of keypresses } } }); } //end of readyForTermination() public void addNotify() { super.addNotify(); //creates the peer startGame(); //start the thread } //end of addNotify() public void startGame() { if(animator == null || !running) { animator = new Thread(this); animator.start(); } } //end of startGame() //run method for world public void run() { while(running) { long beforeTime, timeDiff, sleepTime; beforeTime = System.nanoTime(); gameUpdate(); //updates objects in game (step event in game) gameRender(); //renders image paintScreen(); //paints rendered image to screen timeDiff = (System.nanoTime() - beforeTime) / 1000000; sleepTime = 10 - timeDiff; if(sleepTime <= 0) //if took longer than 10ms { sleepTime = 5; //sleep a bit anyways } try{ Thread.sleep(sleepTime); //sleep by allotted time (attempts to keep this loop to about 10ms) } catch(InterruptedException ex){} beforeTime = System.nanoTime(); } System.exit(0); } //end of run() private void gameRender() { if(dbImage == null) { dbImage = createImage(PWIDTH, PHEIGHT); if(dbImage == null) { System.out.println("dbImage is null"); return; } else dbg = dbImage.getGraphics(); } //clear the background dbg.setColor(Color.white); dbg.fillRect(0, 0, PWIDTH, PHEIGHT); //draw game elements... if(gameOver) { gameOverMessage(dbg); } } //end of gameRender() } //end of class Sim2D Hope this helps clear things up a bit, Jonathan

  Read the article

• "undefined reference" error with namespace across multiple files

  - by user1330734

  I've looked at several related posts but no luck with this error. I receive this undefined reference error message below when my namespace exists across multiple files. If I compile only ConsoleTest.cpp with contents of Console.cpp dumped into it the source compiles. I would appreciate any feedback on this issue, thanks in advance. g++ Console.cpp ConsoleTest.cpp -o ConsoleTest.o -Wall /tmp/cc8KfSLh.o: In function `getValueTest()': ConsoleTest.cpp:(.text+0x132): undefined reference to `void Console::getValue<unsigned int>(unsigned int&)' collect2: ld returned 1 exit status Console.h #include <iostream> #include <sstream> #include <string> namespace Console { std::string getLine(); template <typename T> void getValue(T &value); } Console.cpp #include "Console.h" using namespace std; namespace Console { string getLine() { string str; while (true) { cin.clear(); if (cin.eof()) { break; // handle eof (Ctrl-D) gracefully } if (cin.good()) { char next = cin.get(); if (next == '\n') break; str += next; // add character to string } else { cin.clear(); // clear error state string badToken; cin >> badToken; cerr << "Bad input encountered: " << badToken << endl; } } return str; } template <typename T> void getValue(T &value) { string inputStr = Console::getLine(); istringstream strStream(inputStr); strStream >> value; } } ConsoleTest.cpp #include "Console.h" void getLineTest() { std::string str; std::cout << "getLinetest" << std::endl; while (str != "next") { str = Console::getLine(); std::cout << "<string>" << str << "</string>"<< std::endl; } } void getValueTest() { std::cout << "getValueTest" << std::endl; unsigned x = 0; while (x != 12345) { Console::getValue(x); std::cout << "x: " << x << std::endl; } } int main() { getLineTest(); getValueTest(); return 0; }

  Read the article

• Errors with parameter datatype in PostgreSql query

  - by John

  Im trying to execute a query to postgresql using the following code. It's written in C/C++ and I keep getting the following error when declaring a cursor: DECLARE CURSOR failed: ERROR: could not determine data type of parameter $1 Searching on here and on google, I can't find a solution. Can anyone find where I have made and error and why this is happening? thanks! void searchdb( PGconn *conn, char* name, char* offset ) { // Will hold the number of field in table int nFields; // Start a transaction block PGresult *res = PQexec(conn, "BEGIN"); if (PQresultStatus(res) != PGRES_COMMAND_OK) { printf("BEGIN command failed: %s", PQerrorMessage(conn)); PQclear(res); exit_nicely(conn); } // Clear result PQclear(res); printf("BEGIN command - OK\n"); //set the values to use const char *values[3] = {(char*)name, (char*)RESULTS_LIMIT, (char*)offset}; //calculate the lengths of each of the values int lengths[3] = {strlen((char*)name), sizeof(RESULTS_LIMIT), sizeof(offset)}; //state which parameters are binary int binary[3] = {0, 0, 1}; res = PQexecParams(conn, "DECLARE emprec CURSOR for SELECT name, id, 'Events' as source FROM events_basic WHERE name LIKE '$1::varchar%' UNION ALL " " SELECT name, fsq_id, 'Venues' as source FROM venues_cache WHERE name LIKE '$1::varchar%' UNION ALL " " SELECT name, geo_id, 'Cities' as source FROM static_cities WHERE name LIKE '$1::varchar%' OR FIND_IN_SET('$1::varchar%', alternate_names) != 0 LIMIT $2::int4 OFFSET $3::int4", 3, //number of parameters NULL, //ignore the Oid field values, //values to substitute $1 and $2 lengths, //the lengths, in bytes, of each of the parameter values binary, //whether the values are binary or not 0); //we want the result in text format // Fetch rows from table if (PQresultStatus(res) != PGRES_COMMAND_OK) { printf("DECLARE CURSOR failed: %s", PQerrorMessage(conn)); PQclear(res); exit_nicely(conn); } // Clear result PQclear(res); res = PQexec(conn, "FETCH ALL in emprec"); if (PQresultStatus(res) != PGRES_TUPLES_OK) { printf("FETCH ALL failed"); PQclear(res); exit_nicely(conn); } // Get the field name nFields = PQnfields(res); // Prepare the header with table field name printf("\nFetch record:"); printf("\n********************************************************************\n"); for (int i = 0; i < nFields; i++) printf("%-30s", PQfname(res, i)); printf("\n********************************************************************\n"); // Next, print out the record for each row for (int i = 0; i < PQntuples(res); i++) { for (int j = 0; j < nFields; j++) printf("%-30s", PQgetvalue(res, i, j)); printf("\n"); } PQclear(res); // Close the emprec res = PQexec(conn, "CLOSE emprec"); PQclear(res); // End the transaction res = PQexec(conn, "END"); // Clear result PQclear(res); }

  Read the article

• Bug Triage

  In this blog post brain dump, I'll attempt to describe the process my team tries to follow when dealing with new bug reports (specifically, code defect reports). This is not official Microsoft policy, just the way we do things… if you do things differently and want to share, you can do so at the bottom in the comments (or on your blog).Feature Triage TeamA subset of the feature crew, the triage team (which has representations from the PM, Dev and QA disciplines), looks at all unassigned bugs at regular intervals. This can be weekly or daily (or other frequency) dependent on which part of the product cycle we are in and what the untriaged bug load looks like. They discuss each bug considering the evidence and make a decision of whether the bug goes from Not Yet Assigned to Assigned (plus the name of the DEV to fix this) or whether it goes from Active to Resolved (which means it gets assigned back to the requestor for closure or further debate if they were not present at the triage meeting). Close to critical milestones, the feature triage team needs to further justify bugs they take to additional higher-level triage teams.Bug Opened = Not Yet AssignedSomeone (typically an SDET from the QA team) creates the bug item (e.g. in TFS), ensuring they populate all the relevant fields including: Title, Description, Repro Steps (including the Actual Result at the end of the steps), attachments of code and/or screenshots, Build number that they observed the issue in, regression details if applicable, how it was found, if a test case exists or needs to be created etc. They also indicate their opinion on the Priority and Severity. The bug status is left as Not Yet Assigned."Issue" versus "Fix for issue"The solution to some bugs is easy to determine, e.g. "bug: the column name is misspelled". Obviously the fix is to correct the spelling – still, the triage team should be explicit and enter the correct spelling in the bug's Description. Note that a bad bug name here would be "bug: fix the spelling of the column" (it describes the solution, rather than the problem).Other solutions are trickier to establish, e.g. "bug: the column header is not accessible (can only be clicked on with the mouse, not reached via keyboard)". What is the correct solution here? The last thing to do is leave this undetermined and just assign it to a developer. The solution has to be entered in the description. Behind this type of a bug usually hides a spec defect or a new feature request.The person opening the bug should focus on describing the issue, rather than the solution. The person indicates what the fix is in their opinion by stating the Expected Result (immediately after stating the Actual Result). If they have a complex suggested solution, that should be split out in a separate part, but the triage team has the final say before assigning it. If the solution is lengthy/complicated to describe, the bug can be assigned to the PM. Note: the strict interpretation suggests that any bug with no clear, obvious solution is always a hole in the spec and should always go to the PM. This also ensures the spec gets updated.Not Yet Assigned - Not Yet Assigned (on someone else's plate)If the bug is observed in our feature, but the cause is actually another team, we change the Area Path (which is the way we identify teams in TFS) and leave it as Not Yet Assigned. The triage team may add more comments as appropriate including potentially changing the repro steps. In some cases, we may even resolve the bug in our area path and open a new bug in the area path of the other team.Even though there is no action on a dev on the team, the bug still needs to be tracked. One way of doing this is to implement some notification system that informs the team when the tracked bug changed status; another way is to occasionally run a global query (against all area paths) for bugs that have been opened by a member of the team and follow up with the current owners for stale bugs.Not Yet Assigned - ResolvedThis state transition can only be made by the Feature Triage Team.0. Sometimes the bug description is not clear and in that case it gets Resolved as More Information Needed, so the original requestor can provide it.After understanding what the bug item is about, the first decision is to determine whether it needs to go to a dev.1. If it is a known bug, it gets resolved as "Duplicate" and linked to the existing bug.2. If it is "By Design" it gets resolved as such, indicating that the triage team does not think this is a bug.3. If the bug does not repro on latest bits, it is resolved as "No Repro"4. The most painful: If it is decided that we cannot fix it for this release it gets resolved as "Postponed" or "Won't Fix". The former is typically due to resources and time constraints, while the latter is due to deciding that it is not important enough to consume our resources in any release (yes, not all bugs must be fixed!). For both cases, there are other factors that contribute to the decision such as: existence of a reasonable workaround, frequency we expect users to encounter the issue, dependencies on other team to offer a solution, whether it breaks a core scenario, whether it prohibits customer feedback on a major feature, is it a regression from a previous release, impact of the fix on other partner teams (e.g. User Education, User Experience, Localization/Globalization), whether this is the right fix, does the fix impact performance goals, and last but not least, severity of bug (e.g. loss of customer data, security threat, crash, hang). The bar for fixing a bug goes up as the release date approaches. The triage team becomes hardnosed about which bugs to take, while the developers are busy resolving assigned bugs thus everyone drives for Zero Bug Bounce (ZBB). ZBB is when you have 0 active bugs older than 48 hours.Not Yet Assigned - AssignedIf the bug is something we decide to fix in this release and the solution is known, then it is assigned to a DEV. This is either the developer that will do the work, or a Lead that can further assign it to one of his developer team based on a load balancing algorithm of their choosing.Sometimes, the triage team needs the dev to do some investigation work before deciding whether to take the fix; similarly, the checkin for the fix may be gated on code review by the triage team. In these cases, these instructions are provided in the comments section of the bug and when the developer is done they notify the triage team for final decision.Additionally, a Priority and Severity (from 0 to 4) has to be entered, e.g. a P0 means "drop anything you are doing and fix this now" whereas a P4 is something you get to after all P0,1,2,3 bugs are fixed.From a testing perspective, if the bug was found through ad-hoc testing or an external team, the decision is made whether test cases should be added to avoid future regressions. This is communicated to the QA team.Assigned - ResolvedWhen the developer receives the bug (they should be checking daily for new bugs on their plate looking at bugs in order of priority and from older to newer) they can send it back to triage if the information is not clear. Otherwise, they investigate the bug, setting the Sub Status to "Investigating"; if they cannot make progress, they set the Sub Status to "Blocked" and discuss this with triage or whoever else can help them get unblocked. Once they are unblocked, they set the Sub Status to "Working on Solution"; once they are code complete they send a code review request, setting the Sub Status to "Fix Available". After the iterative code review process is over and everyone is happy with the fix, the developer checks it in and changes the state of the bug from Active (and Assigned to them) to Resolved (and Assigned to someone else).The developer needs to ensure that when the status is changed to Resolved that it is assigned to a QA person. For example, maybe the PM opened the bug, but it should be a QA person that will verify the fix - the developer needs to manually change the assignee in that case. Typically the QA person will send an email to the original requestor notifying them that the fix is verified.Resolved - ??In all cases above, note that the final state was Resolved. What happens after that? The final step should be Closed. The bug is closed once the QA person verifying the fix is happy with it. If the person is not happy, then they change the state from Resolved to Active, thus sending it back to the developer. If the developer and QA person cannot reach agreement, then triage can be brought into it. An easy way to do that is change the status back to Not Yet Assigned with appropriate comments so the triage team can re-review.It is important to note that only QA can close a bug. That means that if the opener of the bug was a PM, when the bug gets resolved by the dev it may land on the PM's plate and after a quick review, the PM would re-assign to an SDET, which is the only role that can close bugs. One exception to this is if the person that filed the bug is external: in that case, we leave it Resolved and assigned to them and also send them a notification that they need to verify the fix. Another exception is if specialized developer knowledge is needed for verifying the bug fix (e.g. it was a refactoring suggestion bug typically not observable by the user) in which case it is fine to have a developer verify the fix, and ideally a different developer to the one that opened the bug.Other links on bug triageA quick search reveals that others have talked about this subject, e.g. here, here, here, here and here.Your take?If you have other best practices your team uses to deal with incoming bug reports, feel free to share in the comments below or on your blog. Comments about this post welcome at the original blog.

  Read the article

• Problem bash completion apt-get 12.10

  - by dadexix86

  I've got an annoying problem with completion and sudo apt-get. To give an example: $ sudo apt-get in[Tab][Tab] in intel_bios_reader includeres intel_disable_clock_gating indicator-multiload intel_dpio_read info intel_dpio_write infobrowser intel_error_decode infocmp intel_forcewaked infokey intel_gpu_abrt infotocap intel_gpu_time inimf intel_gpu_top init intel_gtt init-checkconf intel_l3_parity initctl intel_reg_checker initctl2dot intel_reg_dumper initex intel_reg_read inkscape intel_reg_snapshot inkview intel_reg_write inputattach intel_sprite_on insmod intel_stepping install intel_upload_blit_large install-docs intel_upload_blit_large_gtt installfont-tl intel_upload_blit_large_map install-info intel_upload_blit_small installkernel interdiff --More-- While is working right both with just apt-get or doing it in root: $ apt-get in[Tab]stall $ sudo -i [sudo] password for davide: root@brenna:~# apt-get in[Tab]stall So the problem is using autocompletion after sudo? Not really, because $ sudo apt-[Tab][Tab] apt-add-repository apt-extracttemplates apt-key apt-cache apt-file apt-mark apt-cdrom apt-ftparchive apt-sortpkgs apt-config apt-get Summing up, the problem seems to be using sudo and auto-completion for programs options together. Any good advice for that?

  Read the article

• How ISP or dns server find the nameserevr [on hold]

  - by IT researcher

  I saw some articles about how DNS propagation happens.I know that ISP or DNS server(such as google public dns) cache the ip address of website which it uses to convert domain name to ip address. But my doubt is from where these ISP or dns serevr know which nameserver to go for particular domain name. for example a domain.com has two name servers ns1.domain.com and ns2.domain.com. But how the ISP server or dns server know that it uses these name server and i have to send request to this name server.So where does this record mainatined?

  Read the article

• ASP.NET MVC Postbacks and HtmlHelper Controls ignoring Model Changes

  - by Rick Strahl

  So here's a binding behavior in ASP.NET MVC that I didn't really get until today: HtmlHelpers controls (like .TextBoxFor() etc.) don't bind to model values on Postback, but rather get their value directly out of the POST buffer from ModelState. Effectively it looks like you can't change the display value of a control via model value updates on a Postback operation. To demonstrate here's an example. I have a small section in a document where I display an editable email address: This is what the form displays on a GET operation and as expected I get the email value displayed in both the textbox and plain value display below, which reflects the value in the mode. I added a plain text value to demonstrate the model value compared to what's rendered in the textbox. The relevant markup is the email address which needs to be manipulated via the model in the Controller code. Here's the Razor markup: <div class="fieldcontainer"> <label> Email: &nbsp; <small>(username and <a href="http://gravatar.com">Gravatar</a> image)</small> </label> <div> @Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield"}) @Model.User.Email </div> </div>   So, I have this form and the user can change their email address. On postback the Post controller code then asks the business layer whether the change is allowed. If it's not I want to reset the email address back to the old value which exists in the database and was previously store. The obvious thing to do would be to modify the model. Here's the Controller logic block that deals with that:// did user change email? if (!string.IsNullOrEmpty(oldEmail) && user.Email != oldEmail) { if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; } else // allow email change but require verification by forcing a login user.IsVerified = false; }… model.user = user; return View(model); The logic is straight forward - if the new email address is not valid because it already exists I don't want to display the new email address the user entered, but rather the old one. To do this I change the value on the model which effectively does this:model.user.Email = oldEmail; return View(model); So when I press the Save button after entering in my new email address ([email protected]) here's what comes back in the rendered view: Notice that the textbox value and the raw displayed model value are different. The TextBox displays the POST value, the raw value displays the actual model value which are different. This means that MVC renders the textbox value from the POST data rather than from the view data when an Http POST is active. Now I don't know about you but this is not the behavior I expected - initially. This behavior effectively means that I cannot modify the contents of the textbox from the Controller code if using HtmlHelpers for binding. Updating the model for display purposes in a POST has in effect - no effect. (Apr. 25, 2012 - edited the post heavily based on comments and more experimentation) What should the behavior be? After getting quite a few comments on this post I quickly realized that the behavior I described above is actually the behavior you'd want in 99% of the binding scenarios. You do want to get the POST values back into your input controls at all times, so that the data displayed on a form for the user matches what they typed. So if an error occurs, the error doesn't mysteriously disappear getting replaced either with a default value or some value that you changed on the model on your own. Makes sense. Still it is a little non-obvious because the way you create the UI elements with MVC, it certainly looks like your are binding to the model value:@Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield",required="required" }) and so unless one understands a little bit about how the model binder works this is easy to trip up. At least it was for me. Even though I'm telling the control which model value to bind to, that model value is only used initially on GET operations. After that ModelState/POST values provide the display value. Workarounds The default behavior should be fine for 99% of binding scenarios. But if you do need fix up values based on your model rather than the default POST values, there are a number of ways that you can work around this. Initially when I ran into this, I couldn't figure out how to set the value using code and so the simplest solution to me was simply to not use the MVC Html Helper for the specific control and explicitly bind the model via HTML markup and @Razor expression: <input type="text" name="User.Email" id="User_Email" value="@Model.User.Email" /> And this produces the right result. This is easy enough to create, but feels a little out of place when using the @Html helpers for everything else. As you can see by the difference in the name and id values, you also are forced to remember the naming conventions that MVC imposes in order for ModelBinding to work properly which is a pain to remember and set manually (name is the same as the property with . syntax, id replaces dots with underlines). Use the ModelState Some of my original confusion came because I didn't understand how the model binder works. The model binder basically maintains ModelState on a postback, which holds a value and binding errors for each of the Post back value submitted on the page that can be mapped to the model. In other words there's one ModelState entry for each bound property of the model. Each ModelState entry contains a value property that holds AttemptedValue and RawValue properties. The AttemptedValue is essentially the POST value retrieved from the form. The RawValue is the value that the model holds. When MVC binds controls like @Html.TextBoxFor() or @Html.TextBox(), it always binds values on a GET operation. On a POST operation however, it'll always used the AttemptedValue to display the control. MVC binds using the ModelState on a POST operation, not the model's value. So, if you want the behavior that I was expecting originally you can actually get it by clearing the ModelState in the controller code:ModelState.Clear(); This clears out all the captured ModelState values, and effectively binds to the model. Note this will produce very similar results - in fact if there are no binding errors you see exactly the same behavior as if binding from ModelState, because the model has been updated from the ModelState already and binding to the updated values most likely produces the same values you would get with POST back values. The big difference though is that any values that couldn't bind - like say putting a string into a numeric field - will now not display back the value the user typed, but the default field value or whatever you changed the model value to. This is the behavior I was actually expecting previously. But - clearing out all values might be a bit heavy handed. You might want to fix up one or two values in a model but rarely would you want the entire model to update from the model. So, you can also clear out individual values on an as needed basis:if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; ModelState.Remove("User.Email"); } This allows you to remove a single value from the ModelState and effectively allows you to replace that value for display from the model. Why? While researching this I came across a post from Microsoft's Brad Wilson who describes the default binding behavior best in a forum post: The reason we use the posted value for editors rather than the model value is that the model may not be able to contain the value that the user typed. Imagine in your "int" editor the user had typed "dog". You want to display an error message which says "dog is not valid", and leave "dog" in the editor field. However, your model is an int: there's no way it can store "dog". So we keep the old value. If you don't want the old values in the editor, clear out the Model State. That's where the old value is stored and pulled from the HTML helpers. There you have it. It's not the most intuitive behavior, but in hindsight this behavior does make some sense even if at first glance it looks like you should be able to update values from the model. The solution of clearing ModelState works and is a reasonable one but you have to know about some of the innards of ModelState and how it actually works to figure that out.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• SQL SERVER – PAGEIOLATCH_DT, PAGEIOLATCH_EX, PAGEIOLATCH_KP, PAGEIOLATCH_SH, PAGEIOLATCH_UP – Wait Type – Day 9 of 28

  - by pinaldave

  It is very easy to say that you replace your hardware as that is not up to the mark. In reality, it is very difficult to implement. It is really hard to convince an infrastructure team to change any hardware because they are not performing at their best. I had a nightmare related to this issue in a deal with an infrastructure team as I suggested that they replace their faulty hardware. This is because they were initially not accepting the fact that it is the fault of their hardware. But it is really easy to say “Trust me, I am correct”, while it is equally important that you put some logical reasoning along with this statement. PAGEIOLATCH_XX is such a kind of those wait stats that we would directly like to blame on the underlying subsystem. Of course, most of the time, it is correct – the underlying subsystem is usually the problem. From Book On-Line: PAGEIOLATCH_DT Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Destroy mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_EX Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Exclusive mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_KP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Keep mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_SH Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Shared mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_UP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Update mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_XX Explanation: Simply put, this particular wait type occurs when any of the tasks is waiting for data from the disk to move to the buffer cache. ReducingPAGEIOLATCH_XX wait: Just like any other wait type, this is again a very challenging and interesting subject to resolve. Here are a few things you can experiment on: Improve your IO subsystem speed (read the first paragraph of this article, if you have not read it, I repeat that it is easy to say a step like this than to actually implement or do it). This type of wait stats can also happen due to memory pressure or any other memory issues. Putting aside the issue of a faulty IO subsystem, this wait type warrants proper analysis of the memory counters. If due to any reasons, the memory is not optimal and unable to receive the IO data. This situation can create this kind of wait type. Proper placing of files is very important. We should check file system for the proper placement of files – LDF and MDF on separate drive, TempDB on separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. It is very possible that there are no proper indexes on the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can significantly reduce lots of CPU, Memory and IO (considering cover index has much lesser columns than cluster table and all other it depends conditions). You can refer to the two articles’ links below previously written by me that talk about how to optimize indexes. Create Missing Indexes Drop Unused Indexes Updating statistics can help the Query Optimizer to render optimal plan, which can only be either directly or indirectly. I have seen that updating statistics with full scan (again, if your database is huge and you cannot do this – never mind!) can provide optimal information to SQL Server optimizer leading to efficient plan. Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All of the discussions of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• What is New in ASP.NET 4 Web Development Overview

  - by Aamir Hasan

   Microsoft Recently Microsoft introduce Visual  studio 2010 which have new feature's Name of some new Features are given below. In ASP.NET 4.O has focus on performance and Search Engine Optimization. I'll be taking a look at what I think are the most important new features in ASP.NET 4.Output cache extensibility Session state compression View state mode for individual control Page.MetaKeyword and Page.MetaDescription properties Response.RedirectPermanent method Routing in ASP.NET Increase the URL character length New syntax for Html Encode Predictable Client IDs Web.config file refactoring Auto-Start ASP.NET applications Improvements on Microsoft Ajax LibraryReference:ASP.NET 4 and Visual Studio 2010 Web Development Overview 

  Read the article

• Ubuntu Sudo apt-get -f install

  - by Justin

  I was trying to install a program. And It said that my Dependencies were unmet. And that I should run, sudo apt-get -f install. I have moved everything I didn't need in /etc/apt/sources.list.d/ into the trash. My source.list is all Natty while I am running Oneiric. So maybe I need a new source.list? But here are the things I have: justin@justin-000:~$ sudo apt-get -f install [sudo] password for justin: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-image-3.0.0-13-generic Suggested packages: fdutils linux-doc-3.0.0 linux-source-3.0.0 linux-tools The following NEW packages will be installed: linux-image-3.0.0-13-generic 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. 2 not fully installed or removed. Need to get 0 B/36.5 MB of archives. After this operation, 117 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 270736 files and directories currently installed.) Unpacking linux-image-3.0.0-13-generic (from .../linux-image-3.0.0-13- generic_3.0.0-13.22_i386.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.0.0-13 generic_3.0.0-13.22_i386.deb (--unpack): corrupted filesystem tarfile - corrupted package archive No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic P: Checking for EXTLINUX directory... found. P: Writing config for /boot/vmlinuz-3.0.0-12-generic... P: Writing config for /boot/vmlinuz-2.6.38-11-generic... P: Installing debian theme... done. run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) justin@justin-000:~$ sudo apt-get update justin@justin-000:~$ sudo apt-get update Ign dl.google.com stable InRelease Ign dl.google.com stable InRelease Get:1dl.google.com stable Release.gpg [198 B] Ign us.archive.ubuntu.com oneiric InRelease Ign us.archive.ubuntu.com oneiric-security InRelease Ign http://us.archive.ubuntu.com oneiric-updates InRelease Get:2 dl.google.com stable Release.gpg [198 B] Get:3 dl.google.com stable Release [1,347 B] Get:4 dl.google.com stable Release [1,338 B] Hit us.archive.ubuntu.com oneiric Release.gpg Hit us.archive.ubuntu.com oneiric-security Release.gpg Get:5/dl.google.com stable/main i386 Packages [1,220 B] Hit tp://us.archive.ubuntu.com oneiric-updates Release.gpg Ign tp://dl.google.com stable/main TranslationIndex Get:6 tp://dl.google.com stable/main i386 Packages [464 B] Ign ttp://ppa.launchpad.net oneiric InRelease Hit ttp://us.archive.ubuntu.com oneiric Release Ign ttp://ppa.launchpad.net oneiric InRelease Ign ttp://dl.google.com stable/main TranslationIndex Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-security Release Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-updates Release Hit ttp://us.archive.ubuntu.com oneiric/main Sources Hit ttp://us.archive.ubuntu.com oneiric/restricted Sources Hit ttp://us.archive.ubuntu.com oneiric/universe Sources Hit ttp://us.archive.ubuntu.com oneiric/multiverse Sources Hit ttp://us.archive.ubuntu.com oneiric/main i386 Packages Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/multiverse i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit ://us.archive.ubuntu.com oneiric/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric/universe TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/main Sources Hit ttp://us.archive.ubuntu.com oneiric-security/restricted Sources Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric-security/universe Sources Hit tp://us.archive.ubuntu.com oneiric-security/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-security/main i386 Packages Hit tp://us.archive.ubuntu.com oneiric-security/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse i386 Packages Hit htp://ppa.launchpad.net oneiric/main Sources Hit ttp://ppa.launchpad.net oneiric/main i386 Packages Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/universe TranslationIndex Ign htp://dl.google.com stable/main Translation-en_US Hit htp://us.archive.ubuntu.com oneiric-updates/main Sources Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Sources Hit tp://us.archive.ubuntu.com oneiric-updates/universe Sources Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-updates/main i386 Packages Ign htp://dl.google.com stable/main Translation-en Hit ttp://ppa.launchpad.net oneiric/main Sources Hit htp://ppa.launchpad.net oneiric/main i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/restricted i386 Packages Ign htp://dl.google.com stable/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit hp://us.archive.ubuntu.com oneiric-updates/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/multiverse i386 Packages Hit htp://us.archive.ubuntu.com oneiric-updates/main TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/restricted TranslationIndex Ign htp://dl.google.com stable/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/main Translation-en Hit ttp://us.archive.ubuntu.com oneiric/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/main Translation-en Hit hp://us.archive.ubuntu.com oneiric-security/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htt://ppa.launchpad.net oneiric/main Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main Translation-en Fetched 4,765 B in 2s (2,158 B/s) Reading package lists... Done justin@justin-000:~$

  Read the article

• Le C++ expressif n° 1 : introduction, un article d'Eric Niebler traduit par Timothée Bernard

  Dissimulé dans C++ se cache un autre langage - d'innombrables autres langages, en fait - tous sont meilleurs que le C++ pour résoudre certains types de problèmes. Ces domain-specific languages (abrégé DSL) sont par exemple des langages pour l'algèbre linéaire ou des langages de requêtes, ils ne peuvent faire qu'une seule chose, mais ils le font bien. On peut créer et utiliser ces langages directement dans le C++, en utilisant la puissance et la flexibilité du C++ pour remplacer les parties communes du langage par les parties spécifiques au domaine que nous utilisons. Dans cette série d'article, Eric Niebler regarde de près les domain-specific languages, dans quels domaines ils sont utiles et comment on peut facilement les implémenter en C++ avec l'aide de

  Read the article

• Getting a Web Resource Url in non WebForms Applications

  - by Rick Strahl

  WebResources in ASP.NET are pretty useful feature. WebResources are resources that are embedded into a .NET assembly and can be loaded from the assembly via a special resource URL. WebForms includes a method on the ClientScriptManager (Page.ClientScript) and the ScriptManager object to retrieve URLs to these resources. For example you can do: ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); GetWebResourceUrl requires a type (which is used for the assembly lookup in which to find the resource) and the resource id to lookup. GetWebResourceUrl() then returns a nasty old long URL like this: WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634533278261362212 While lately excessive resource usage has been frowned upon especially by MVC developers who tend to opt for content distributed as files, I still think that Web Resources have their place even in non-WebForms applications. Also if you have existing assemblies that include resources like scripts and common image links it sure would be nice to access them from non-WebForms pages like MVC views or even in plain old Razor Web Pages. Where's my Page object Dude? Unfortunately natively ASP.NET doesn't have a mechanism for retrieving WebResource Urls outside of the WebForms engine. It's a feature that's specifically baked into WebForms and that relies specifically on the Page HttpHandler implementation. Both Page.ClientScript (obviously) and ScriptManager rely on a hosting Page object in order to work and the various methods off these objects require control instances passed. The reason for this is that the script managers can inject scripts and links into Page content (think RegisterXXXX methods) and for that a Page instance is required. However, for many other methods - like GetWebResourceUrl() - that simply return resources or resource links the Page reference is really irrelevant. While there's a separate ClientScriptManager class, it's marked as sealed and doesn't have any public constructors so you can't create your own instance (without Reflection). Even if it did the internal constructor it does have requires a Page reference. No good… So, can we get access to a WebResourceUrl generically without running in a WebForms Page instance? We just have to create a Page instance ourselves and use it internally. There's nothing intrinsic about the use of the Page class in ClientScript, at least for retrieving resources and resource Urls so it's easy to create an instance of a Page for example in a static method. For our needs of retrieving ResourceUrls or even actually retrieving script resources we can use a canned, non-configured Page instance we create on our own. The following works just fine: public static string GetWebResourceUrl(Type type, string resource ) { Page page = new Page(); return page.ClientScript.GetWebResourceUrl(type, resource); } A slight optimization for this might be to cache the created Page instance. Page tends to be a pretty heavy object to create each time a URL is required so you might want to cache the instance: public class WebUtils { private static Page CachedPage { get { if (_CachedPage == null) _CachedPage = new Page(); return _CachedPage; } } private static Page _CachedPage; public static string GetWebResourceUrl(Type type, string resource) { return CachedPage.ClientScript.GetWebResourceUrl(type, resource); } } You can now use GetWebResourceUrl in a Razor page like this: <!DOCTYPE html> <html <head> <script src="@WebUtils.GetWebResourceUrl(typeof(ControlResources),ControlResources.JQUERY_SCRIPT_RESOURCE)"> </script> </head> <body> <div class="errordisplay"> <img src="@WebUtils.GetWebResourceUrl(typeof(ControlResources),ControlResources.WARNING_ICON_RESOURCE)" /> This is only a Test! </div> </body> </html> And voila - there you have WebResources served from a non-Page based application. WebResources may be a on the way out, but legacy apps have them embedded and for some situations, like fallback scripts and some common image resources I still like to use them. Being able to use them from non-WebForms applications should have been built into the core ASP.NETplatform IMHO, but seeing that it's not this workaround is easy enough to implement.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  MVC   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Clean up after Visual Studio

  - by psheriff

  As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer.  Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• SQL SERVER – PAGELATCH_DT, PAGELATCH_EX, PAGELATCH_KP, PAGELATCH_SH, PAGELATCH_UP – Wait Type – Day 12 of 28

  - by pinaldave

  This is another common wait type. However, I still frequently see people getting confused with PAGEIOLATCH_X and PAGELATCH_X wait types. Actually, there is a big difference between the two. PAGEIOLATCH is related to IO issues, while PAGELATCH is not related to IO issues but is oftentimes linked to a buffer issue. Before we delve deeper in this interesting topic, first let us understand what Latch is. Latches are internal SQL Server locks which can be described as very lightweight and short-term synchronization objects. Latches are not primarily to protect pages being read from disk into memory. It’s a synchronization object for any in-memory access to any portion of a log or data file.[Updated based on comment of Paul Randal] The difference between locks and latches is that locks seal all the involved resources throughout the duration of the transactions (and other processes will have no access to the object), whereas latches locks the resources during the time when the data is changed. This way, a latch is able to maintain the integrity of the data between storage engine and data cache. A latch is a short-living lock that is put on resources on buffer cache and in the physical disk when data is moved in either directions. As soon as the data is moved, the latch is released. Now, let us understand the wait stat type  related to latches. From Book On-Line: PAGELATCH_DT Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Destroy mode. PAGELATCH_EX Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Exclusive mode. PAGELATCH_KP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Keep mode. PAGELATCH_SH Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Shared mode. PAGELATCH_UP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Update mode. PAGELATCH_X Explanation: When there is a contention of access of the in-memory pages, this wait type shows up. It is quite possible that some of the pages in the memory are of very high demand. For the SQL Server to access them and put a latch on the pages, it will have to wait. This wait type is usually created at the same time. Additionally, it is commonly visible when the TempDB has higher contention as well. If there are indexes that are heavily used, contention can be created as well, leading to this wait type. Reducing PAGELATCH_X wait: The following counters are useful to understand the status of the PAGELATCH: Average Latch Wait Time (ms): The wait time for latch requests that have to wait. Latch Waits/sec: This is the number of latch requests that could not be granted immediately. Total Latch Wait Time (ms): This is the total latch wait time for latch requests in the last second. If there is TempDB contention, I suggest that you read the blog post of Robert Davis right away. He has written an excellent blog post regarding how to find out TempDB contention. The same blog post explains the terms in the allocation of GAM, SGAM and PFS. If there was a TempDB contention, Paul Randal explains the optimal settings for the TempDB in his misconceptions series. Trace Flag 1118 can be useful but use it very carefully. I totally understand that this blog post is not as clear as my other blog posts. I suggest if this wait stats is on one of your higher wait type. Do leave a comment or send me an email and I will get back to you with my solution for your situation. May the looking at all other wait stats and types together become effective as this wait type can help suggest proper bottleneck in your system. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Cannot install any software from the Software Center due to ttf-mscorefonts-installer package error

  - by Dei

  When I try to install any software from ubuntu software center it comes with error: An unhandled error occured There seems to be a programming error in aptdaemon. This is the software that allows you to install/remove software and to perform other package management related tasks. details Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 961, in simulate trans.unauthenticated = self._simulate_helper(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1085, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 226, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate file for the ttf-mscorefonts-installer package. This might mean you need to manually fix this package. Please help me!

  Read the article

• Installing gtk-config and/or fsv in Ubuntu 10.10

  - by Wayne Werner

  Hi, I'm trying to install the File System Visualizer (think "It's a UNIX System! I know this!" from Jurassic Park) on Ubuntu 10.10. I've got the .tar.gz downloaded, and extracted. However, when I ./configure, I get this output: loading cache ./config.cache checking for a BSD compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... missing checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking how to run the C preprocessor... gcc -E checking for ranlib... ranlib checking for POSIXized ISC... no checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for ANSI C header files... yes checking whether time.h and sys/time.h may both be included... yes checking for strings.h... yes checking for sys/time.h... yes checking for unistd.h... yes checking for working const... yes checking for mode_t... yes checking for uid_t in sys/types.h... yes checking for pid_t... yes checking for size_t... yes checking for comparison_fn_t... yes checking for st_blocks in struct stat... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for working alloca.h... yes checking for alloca... yes checking for working fnmatch... yes checking for strftime... yes checking for getcwd... yes checking for gettimeofday... yes checking for mktime... yes checking for strcspn... yes checking for strdup... yes checking for strspn... yes checking for strtod... yes checking for strtoul... yes checking for scandir... yes checking for inline... inline checking for off_t... yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking for argz.h... yes checking for limits.h... yes checking for locale.h... yes checking for nl_types.h... yes checking for malloc.h... yes checking for string.h... yes checking for unistd.h... (cached) yes checking for sys/param.h... yes checking for getcwd... (cached) yes checking for munmap... yes checking for putenv... yes checking for setenv... yes checking for setlocale... yes checking for strchr... yes checking for strcasecmp... yes checking for strdup... (cached) yes checking for __argz_count... yes checking for __argz_stringify... yes checking for __argz_next... yes checking for stpcpy... yes checking for LC_MESSAGES... yes checking whether NLS is requested... yes checking whether included gettext is requested... no checking for libintl.h... yes checking for gettext in libc... yes checking for msgfmt... /usr/bin/msgfmt checking for dcgettext... yes checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for gtk-config... no checking for GTK - version >= 1.2.1... no *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. configure: error: Cannot find proper GTK+ version Obviously it's looking for gtk-config. However, apparently it doesn't exist in the repos anymore. Then this post mentioned that gtkglarea solved their problem, as mentioned in this file. Of course that poster neatly forgets to mention exactly what and how gtkglarea solved their problem, and Google is mostly devoid of information on the problem. So I come here asking for help! I would like to install fsv, but it tells me gtk-config doesn't exist. How can I fix this problem in Ubuntu 10.10? Thanks!

  Read the article

• NoSQL Memcached API for MySQL: Latest Updates

  - by Mat Keep

  With data volumes exploding, it is vital to be able to ingest and query data at high speed. For this reason, MySQL has implemented NoSQL interfaces directly to the InnoDB and MySQL Cluster (NDB) storage engines, which bypass the SQL layer completely. Without SQL parsing and optimization, Key-Value data can be written directly to MySQL tables up to 9x faster, while maintaining ACID guarantees. In addition, users can continue to run complex queries with SQL across the same data set, providing real-time analytics to the business or anonymizing sensitive data before loading to big data platforms such as Hadoop, while still maintaining all of the advantages of their existing relational database infrastructure. This and more is discussed in the latest Guide to MySQL and NoSQL where you can learn more about using the APIs to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database The native Memcached API is part of the MySQL 5.6 Release Candidate, and is already available in the GA release of MySQL Cluster. By using the ubiquitous Memcached API for writing and reading data, developers can preserve their investments in Memcached infrastructure by re-using existing Memcached clients, while also eliminating the need for application changes. Speed, when combined with flexibility, is essential in the world of growing data volumes and variability. Complementing NoSQL access, support for on-line DDL (Data Definition Language) operations in MySQL 5.6 and MySQL Cluster enables DevOps teams to dynamically update their database schema to accommodate rapidly changing requirements, such as the need to capture additional data generated by their applications. These changes can be made without database downtime. Using the Memcached interface, developers do not need to define a schema at all when using MySQL Cluster. Lets look a little more closely at the Memcached implementations for both InnoDB and MySQL Cluster. Memcached Implementation for InnoDB The Memcached API for InnoDB is previewed as part of the MySQL 5.6 Release Candidate. As illustrated in the following figure, Memcached for InnoDB is implemented via a Memcached daemon plug-in to the mysqld process, with the Memcached protocol mapped to the native InnoDB API. Figure 1: Memcached API Implementation for InnoDB With the Memcached daemon running in the same process space, users get very low latency access to their data while also leveraging the scalability enhancements delivered with InnoDB and a simple deployment and management model. Multiple web / application servers can remotely access the Memcached / InnoDB server to get direct access to a shared data set. With simultaneous SQL access, users can maintain all the advanced functionality offered by InnoDB including support for Foreign Keys, XA transactions and complex JOIN operations. Benchmarks demonstrate that the NoSQL Memcached API for InnoDB delivers up to 9x higher performance than the SQL interface when inserting new key/value pairs, with a single low-end commodity server supporting nearly 70,000 Transactions per Second. Figure 2: Over 9x Faster INSERT Operations The delivered performance demonstrates MySQL with the native Memcached NoSQL interface is well suited for high-speed inserts with the added assurance of transactional guarantees. You can check out the latest Memcached / InnoDB developments and benchmarks here You can learn how to configure the Memcached API for InnoDB here Memcached Implementation for MySQL Cluster Memcached API support for MySQL Cluster was introduced with General Availability (GA) of the 7.2 release, and joins an extensive range of NoSQL interfaces that are already available for MySQL Cluster Like Memcached, MySQL Cluster provides a distributed hash table with in-memory performance. MySQL Cluster extends Memcached functionality by adding support for write-intensive workloads, a full relational model with ACID compliance (including persistence), rich query support, auto-sharding and 99.999% availability, with extensive management and monitoring capabilities. All writes are committed directly to MySQL Cluster, eliminating cache invalidation and the overhead of data consistency checking to ensure complete synchronization between the database and cache. Figure 3: Memcached API Implementation with MySQL Cluster Implementation is simple: 1. The application sends reads and writes to the Memcached process (using the standard Memcached API). 2. This invokes the Memcached Driver for NDB (which is part of the same process) 3. The NDB API is called, providing for very quick access to the data held in MySQL Cluster’s data nodes. The solution has been designed to be very flexible, allowing the application architect to find a configuration that best fits their needs. It is possible to co-locate the Memcached API in either the data nodes or application nodes, or alternatively within a dedicated Memcached layer. The benefit of this flexible approach to deployment is that users can configure behavior on a per-key-prefix basis (through tables in MySQL Cluster) and the application doesn’t have to care – it just uses the Memcached API and relies on the software to store data in the right place(s) and to keep everything synchronized. Using Memcached for Schema-less Data By default, every Key / Value is written to the same table with each Key / Value pair stored in a single row – thus allowing schema-less data storage. Alternatively, the developer can define a key-prefix so that each value is linked to a pre-defined column in a specific table. Of course if the application needs to access the same data through SQL then developers can map key prefixes to existing table columns, enabling Memcached access to schema-structured data already stored in MySQL Cluster. Conclusion Download the Guide to MySQL and NoSQL to learn more about NoSQL APIs and how you can use them to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database See how to build a social app with MySQL Cluster and the Memcached API from our on-demand webinar or take a look at the docs Don't hesitate to use the comments section below for any questions you may have 

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >