Search Results

Search found 5618 results on 225 pages for 'recursive dns'.

Page 172/225 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Cannot acess the new cloned server even after new IP address assignment

  - by tough

  I was able to clone a Ubuntu 10.04 server residing in Cloud. It appeared that I was not getting some IP for the new VM so I followed some of these: # cd /etc/udev/rules.d # cp 70-persistent-net.rules /root/ # rm 70-persistent-net.rules # reboot I didn't follow the later commands as I was unable to see two eth MACs as available in the referenced site. After this I am able to see some the IP for it, and is different form the original IP, I have added new IP to DNS server. Now when I try to access it with its assigned(new) domain it is directed to the old server. I can see both the VMs running with different IP. Where I might have gone wrong, I am new to this admin thing.

  Read the article

• Very slow loading pages with router

  - by user984621

  I bought new router - this one: http://www.tp-link.com/en/products/details/?model=TL-WR841ND and the problem is, that the loading pages is so slow, even sometimes the pages aren't loaded at all. Is the same, when I have on the Mac OS or Windows. Below are the informations from the router-admin section: LAN IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 WAN IP Address: 192.168.1.100 Dynamic IP Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 DNS Server: 89.203.178.2 , 10.14.2.1 How can I fix this problem? Is almost impossible to use the internet this way.

  Read the article

• MailServer Setting

  - by Ashian

  Hi I have a mail server on windows 2003 ( MailEnable) I setup mail server to authonticate users before sending mail. (This mail server requires authentication when attempting to send to a non-local e-mail address) but from yesterday , without change any setting I got many Message Delivery Delay from mail server for email address that I never try to sending email: I afraid that I someone try to sending Spam from my mail server,How can I check this possiblity ? and fix the problem. Thanks MailEnable: Message delivery has been delayed. Message is waiting at *.info for delivery to mailin-03.mx.aol.com. The message will be retried for another 29 hours. Reason: Mail Server for aol.com could not accept your email at this time. MailEnable will keep trying to deliver this message and will notify you of any progress. The remote mail server returned the error: 421-: (DNS:NR)

  Read the article

• IPv6 in a Small Business

  - by Martyn

  I’ve been tasked to identify a new server and IT equipment for the company I work for (employees <20). I’m looking at getting a SBS 2011 Standard box. My Question is: Apart from ensuring that our router is IPv6 compliant, is there anything else I need to do/investigate to ensure that we won’t have IPv6 related problems in the future? When investigating this I can only find references to DNS Mangers etc. The SBS 2011 box will be used for exchange and remote log in access – it won’t be hosting any websites. Also will VOIP phone systems be affected by IPv6? (We are running a rather old VOIP system, would that need to be updated?

  Read the article

• How can I control wireless networks in Ubuntu without Network-Manager?

  - by Solignis

  Hi there, I recently installed Ubuntu on a laptop I got. I was having issues with the network manager just like I was having in my VM where it was not setting up the hostname correctly. Anyhow now I have a problem, since it is a laptop it will be moving.... But I have no way to discover new wireless networks. Anyway I can gain that functionality back? The problem I am running into is that I need to set the DNS search and domain for the machine so I can access my network but the network-manager was overriding the settings. Any help would be much appreciated.

  Read the article

• Dynamic to static internal IP address (Snow Leopard server)

  - by bac

  I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

  Read the article

• certificate error while subdomain forwarding

  - by rahulchandran

  I have a website, call it http://sub.example.com, hosted on, say, 72.xx.xx.x. There is a certificate for https://sub.example.com. Now I go into the DNS management tool in my hosting provider, and I set up the standard subdomain forwarding wherein https://sub.example.com forwards to 72.xx.xx.x. Now when I try to browse to https://sub.example.com, I get a certificate error saying it is for the wrong website. I have also tried forwarding http://sub.example.com to 72.xx.xx.x, and tried it with domain masking in both cases. I am still getting the certificate error no matter what. Additional wrinkle: if someone types in https://sub.example.com then the domain forwarding does not seem to work and IE just spins endlesssly and finally fails. How can I domain forward the https://sub.example.com to 72.xx.xx.x?

  Read the article

• SSL/https setup for herokuapp.com address rather than my actual domain

  - by new2ruby

  I have a subdomain of my site pointed to a rails app at mysite.herokuapp.com. I bought a certificate from godaddy and seem to have that all set up correctly. So that when I go to: http://mysite.herokuapp.com or http://dev.mysite.com it's redirected to: https://mysite.herokuapp.com or https://dev.mysite.com The problem is that when I visit dev.mysite.com, I get the error: Safari can't verify the identity of the website. But when I go to mysite.herokuapp.com, I don't get the error. I wanted this to be set up the other way, so that dev.mysite.com did not cause the error. I'm not sure where I went wrong. I used dev.mysite.com when generating the key and when setting it up at godaddy.com. Any ideas where I should look? P.S. The old site is hosted at dreamhost and the DNS info is stored there as well. So I created a subdomain there of type cname which points to mysite.herokuapp.com.

  Read the article

• "Exchange Management Console" 2007 can't connect to Active directory on load : get-ExchangeServer

  - by Dragouf

  Since a little time I can't use Exchange Management Console on an exchange 2007 server because of a message which tell me that get-ExchangeServer return that active directory of my server is available. My config is : Windows server 2008 sp2 wit roles : DNS IIS Active Directory RAS and Exchange server 2007. Here is a screenshot of the error message (I run windows server 2008 french edition sorry) : in english : The following error(s) were reported while loading topology information: get-ExchangeServer Failed Error: Active Directory server <theserver> is not available. Error message: A local error occurred. A local error occurred. get-UMServer Failed Error: Active Directory server <theserver> is not available. Error message: A local error occurred. A local error occurred. Anyone know from where this problem is comming and how to resolve it ?

  Read the article

• Yahoo toolbar and local sites (e.g. Intranet)

  - by Klaptrap

  We have local sites running on IIS in regular MS Windows network. User base has IE, FireFox and Chrome. Local sites are isolated by host headers and DNS record created for the common IP accordingly. This is a regular set-up. Users without Yahoo Toolbar type http://intranet and the sites resolves. Users with Yahoo toolbar type http://intranet and the toolbar goes off to search for this site in public domain. This is irrespective to whether the address is typed into the browser address bar or the toolbar. All versions of toolbar and IE are affected. I cannot see a setting on the toolbar to switch this "irritating" behaviour off and simply un-installing the toolbar is not an option. Any ideas?

  Read the article

• Access my local server by hostname or servername

  - by S.M.09

  I have a local host server hosting a few applications in tomcat which comes through a apache proxy The client or User trying to access these application has to access them like 10.XXX.XXX.XX:8080/appName OR 10.XXX.XXX.XX/appName But I want to replace the ip address with soem other name related to my applications. But I cannot go and enter the host name of the server in each users /etc/host Nor do I want to be setting up DNS. Is there another way to do this. I am using ProxyPass XXX YYY to redirect all applications of tomcat to port 80

  Read the article

• Highly Available Web Application (LAMP)

  - by Anthony Rizzo

  I work for a small company who provides a web application for thousands of users. Earlier this year they had one server hosted one company. We recently acquired another server in a different location with the hopes of one day making this a redundant failover machine. I understand what to do with the mysql replication, I plan on using a master-master replication setup, and rsync to sync the scripts and files, however I am at a stand still about how to configure the fail-over. Ideally I would like the two machines to accept requests, like a round robin dns, however if one machine goes down I do not want requests to go that machine. All of the solutions I am come across assumes high availability of servers in the same location, these servers are in two completely different locations with different public ip address. Any help would be great. Thanks

  Read the article

• Subversion: Avoid proxy use on intranet

  - by l0b0

  I'm trying to exclude all intranet hosts from proxy use, but it looks like http-proxy-exceptions just looks at the command line string, not what the host name in the string resolves to. Because of this, it looks like the only way to avoid proxy use on the IP 123.456.789.012*, which also answers to vcs, vcs.example.org, svn, svn.example.org, subversion and subversion.example.org is to list all of them, not just the IP. Is there some trick to make Subversion either resolve IP addresses before checking for proxy exceptions, or exclude everything that is not a fully qualified DNS name (that is, doesn't contain a dot)? * Yes, I know that's not a valid IP

  Read the article

• Set Valid IP On Vmware Vm's Help Please

  - by Shahin At

  I Have a VPS.And i on my vps installed vmware workstation version 9.now i have 3 valid ip's: XXX.152.193.66 XXX.152.193.101 XXX.152.193.103 Gateway: XXX.152.193.65 now tow ip's set in host and i want to 1 ip set on vm. network vm is bridge and set ip on vm but this ip from out of internal network not ping and in vm not ping to gateway. What can I do to solve this problem? my ip is unassigned and only set on vm and use bridge network mode.and gw,mask,dns is set.but not ping. i set this ip on host and without problems is worked, But I do not know why on vm not worked. my host OS Is Windows Server 2003 and firewall is off and RRAs(routing and remote access) For VPN service is Enable. Do not host or virtual machines to create a IP route?

  Read the article

• Subversion error: Repository moved permanently to please relocate

  - by Bart S.

  I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. (it does now - see edit) My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this? -- Edit So I restarted apache (again) and tried it again and now it give me an error message, but it doesn't really help. Anyone have an idea what it means? [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] Could not fetch resource information. [403, #0] [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] (2)No such file or directory: The URI does not contain the name of a repository. [403, #190001] -- Edit 2 If I do svn info it doesn't give anything usefull: [root@eduro eduro.nl]# svn info http://svn.domain.com/repos/ Username: username Password for 'username': svn: Repository moved permanently to 'http://svn.domain.com/repos/'; please relocate I also tried doing a local checkout (svn checkout file:///var/www/svn/repos/reposname) and that works fine (also adding / commiting works fine). So it seems is has something to do with apache. Some other information: I'm running CentOs 5.3 Plesk 9.3 Subversion, version 1.6.9 (r901367) -- Edit 3 I tried moving the repositories, but it didn't make any difference. selinux is disabled so that isn't it either. -- Edit 4 Really? Nobody :(?

  Read the article

• Iptables remote port forwarding and dynamic remote ip

  - by lbwtz2

  Hello, I want to forward a port from my remote vps to my domestic server and I am quite a newbie with iptables. The problem is that I am using a dynamic dns service to reach my home server from the internet so I don't have a fixed ip and iptables doesn't like urls. The rules I am willing to use are these: -t nat -A PREROUTING -p tcp -i eth0 -d xxx.xxx.xxx.xxx --dport 8888 -j DNAT --to myhome.tld:80 -A FORWARD -p tcp -i eth0 -d myhome.tld --dport 80 -j ACCEPT Of course I recevie a Error BAD IP ADDRESS because of myhome.tld. What can I do?

  Read the article

• How to install Gitlab in a VM on a production server?

  - by Michaël Perrin

  I have a production server running Ubuntu 12.04 and I would like to install on it a VM with Gitlab (using Vagrant and Virtualbox). Let's say that the address to access Gitlab is gitlab.mydomain.com . The DNS zone has been configured to point to the IP address of the server. I want users to be able to access to Gitlab (either for pushing to a repository, or for accessing to the web interface) from the outside. The VM has been configured to have an IP address. It means that when browsing http://gitlab.mydomain.com for instance, the request has to be forwarded to the VM on the server, ie. to the VM IP address. What are the ways to configure this? Can Apache be used as a proxy? In this case, I guess it only works for HTTP requests, but not for pushing to a Git repository on the VM.

  Read the article

• What router settings to use for wireless home network

  - by Question Overflow

  While looking at the setting of my wireless router, I am bewildered by the array of options available. Despite searching on Wikipedia to try to understand the various acronyms, I am still clueless to decide what is the best setting to use although the default works fine. Rather than calling the internet service provider (ISP) to ask them the correct settings, I hope to learn more about the differences between some of the options listed below, so that I would be able to make a more informed decision from now onwards: PPPoE vs PPPoA LLC vs VC-Mux Bridge vs Routed In addition, I would also like to know the significance of the following MTU VPI VCI And whether or when I should manually specify DNS?

  Read the article

• SSL Certificate

  - by Dremarturg

  Hey, I have a mail-server running and I want to buy a SSL-Certificate as they are pretty cheap now. I use mail.domain.com as reverse-DNS, POP3 and SMTP clients use mail.domain.com (some use pop3.domain.com and smtp.domain.com) for sending and receiving e-mails. The SSL-Submission asks me for a domain - is it mail.domain.com or domain.com as I do not have a Wildcard-SSL? I just want to use it for Mail. Or is it possible to use it for both by using domain.com? (Apache and Postfix/Courier on the same server and IP)

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Install Trac Without Setting Up a VirtualHost in Apache?

  - by jobu1324

  I'm trying to set up Trac to test out it's functionality, and the only guides I can find online talk about setting up a VirtualHost. Right now I am under the impression that I need access to a DNS server to properly use the VirtualHost directive, and for various reasons I don't have access to one. Is it possible to set up Trac without setting up a VirtualHost? I haven't had any luck. If I run the site with tracd, it works - which means that at least part of it is set up properly. Right now all I have is an Apache Directory directive pointing to /pathToTracSite/htdocs/, and when I visit the trac location, all I get when viewing the site from a browser is an empty directory (which makes sense, because htdocs/ is empty). My server is running Apache2 I know I'm missing a lot here, because I don't understand Apache the Trac system very well - any help would be appreciated.

  Read the article

• WCF over http settings needed

  - by Crishna

  Hello, We currently have a WCF Service that works over https. But we want to change it to make it work over just http. Could any one tell me what all do I need to change to make the the wcf service work over http. Below is my config file values. Is there anything I else I need to cahnge other than the web.config?? ANy help greatly appreciated <bindings> <basicHttpBinding> <binding name="basicHttpBinding_Windows" maxReceivedMessageSize="500000000" maxBufferPoolSize="500000000" messageEncoding="Mtom"> <security mode="TransportWithMessageCredential"> <transport clientCredentialType="Windows" /> </security> <readerQuotas maxDepth="500000000" maxArrayLength="500000000" maxBytesPerRead="500000000" maxNameTableCharCount="500000000" maxStringContentLength="500000000"/> </binding> </basicHttpBinding> </bindings> <behaviors> <endpointBehaviors> <behavior name="myproject_Behavior"> <dataContractSerializer /> <synchronousReceive /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="WebService.WSBehavior"> <serviceMetadata httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> <behavior name="WebService.Forms_WSBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="WebService.WSBehavior" name="IMMSWebService.mywebservice_WS"> <endpoint address="myproject_WS" binding="basicHttpBinding" bindingConfiguration="basicHttpBinding_Windows" bindingName="basicHttpBinding" contract="WebService.ICommand"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" /> <host> <timeouts closeTimeout="00:10:00" openTimeout="00:10:00" /> </host> </service> <service behaviorConfiguration="WebService.Forms_WSBehavior" name="WebService.Forms_WS"> <endpoint address="" binding="wsHttpBinding" contract="WebService.IForms_WS"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services>

  Read the article

• Virtual hosts and subdomains, need configuring on live, not on dev

  - by rix

  I have a query about subdomains and virtual hosts. On my dev server, I ca nset up a new virtual hosts and point it to a subdomain, ie: newdomain.mydevserver.com All is fine and I can access 'newdomain/mydevserver/com' I can also do 'host newdomain.mydevserver.com' However, when I do the same with my main server I get the server couldn't be contacted error - I'm guessing that's because i need a cname or a record for the DNS. My question is, why does it seem that i can create subdomains on my dev but not on my live server? Help appreciated, many thanks!

  Read the article

• Name of my sql server instance from outside the network

  - by Michel

  Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

  Read the article

• Different Servers for incoming mails

  - by André

  Hi everybody, not sure if what I want is possible so I´d appreciate any pointers. I have full control over the infrastructure (DNS and servers) Currently I receive mails for domain.tld. MX record for domain.tld is gw.domain.tld. gw then does some spam and virus checking and forwards the mails to the internal exchange server. GW is a Proxmox Mail Gateway Box (Free license) Now what I want is to distribute mails for different recipients to other mail servers. Basicly I only want [email protected] and [email protected] to go to the exchange as before, but all others go to a different mail server (based on linux). Any idea how I could achieve this?

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >