Search Results

Search found 59254 results on 2371 pages for 'http host'.

Page 173/2371 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    Hi, I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

    - by Philip Durbin
    Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

    Read the article

  • How to connect XP mode VM to the host so as to simulate LAN Activities?

    - by rsjethani
    First of all my PC config: Host:Windows 7(32-bit) Guest: Windows XP SP3 as XP Mode. Integration Features Disabled(I don't think it has any thing to do with networking). Network Connections on Host : 1.Local Area Connection(Realtek...) - unplugged(as no other PC is connected). 2.Nokia 2730 classic USB Modem - I use this connect to the internet. Now,How can I connect the guest to the host as if they were on a LAN. Please give specific steps as I am using Windows XP Mode/Virtual machine for the first time.

    Read the article

  • Can I temporarily leave other roles active when converting a 2008 R2 server to a hyper-v host?

    - by Eric
    I currently have a Windows 2008 R2 box that I want to convert to a hyper-v host. Currently I have the following running on it: File Services, Web Server (IIS), and Sql Server 2008 R2 with a few different DBs. In the long term, I'd like to move all of those over to the VMs that will be created. However, in the short term I'd like to leave them running on the server. Are there any complications/problems with leaving them running on the hyper-v server for a day or two? How long will those services typically go down during the addition of the hyper-v role? Right now my plan is to back up everything, enable the hyper-v role, set up VMs, and migrate stuff off of the host. However, if there is a good probability that something may cease to function I might need to migrate everything over to a temporary host before doing the conversion.

    Read the article

  • Cacti is not monitoring the correct host... How do I change SNMP target?

    - by wil
    I have been handed a Cacti server that monitors a few hosts. I noticed that three of the targets were displaying the exact same data - the cacti machine, machine a and machine b. After doing a bit of digging, I noticed that machine a and machine b had "Local Linux Machine" set under "Host Template". I have since changed the host template to "Generic SNMP-enabled Host", however, all the graphs still only display data from the local cacti machine (Updates every 5 minutes - I changed this yesterday - 12 hours). I can't think what else is wrong and was wondering if anyone knows/can recommend anything?

    Read the article

  • Virtual PC "The page cannot be displayed" error connecting to iis7.5 site on Win7 host.

    - by stan
    I setup virtual pc with the Windows XP IE6 VHD to test a site on Windows 7 host. I created a loopback adapter connection on the host. I have several sites on IIS 7.5, I'm able to connect to all of them except one. And it's the site I need to test... I get "The page cannot be displayed" error. The site loads fine from the host(Windows 7). I've made sure the permissions match that of the other sites that do load. I've recreated the application in IIS manager. Does anyone know what the problem might be?

    Read the article

  • AppFabric named cache, what happens if you lose a cache host?

    - by Liam
    I'm getting my head around how app fabric clustering works and there's something I'm not sure about. Given a structure where we have one named cache, with two lead hosts and (say) three cache hosts and high availability turned off and the lead host(s) performing the management role. When one cache host goes down do you loose the data that was on that cache host? In this MSDN article it states: Data on the non-lead hosts would be lost (assuming high availability was not enabled), but the rest of the cluster could continue serving and storing data But I was unsure if redundancy is built into the system. Would you loose x amount of data or would one of the other cache hosts store this data also and pick up the slack?

    Read the article

  • Deploying virtual machines - Windows Guest/Linux Host or vice versa?

    - by samoz
    I'm looking to deploy several virtual machines for users. They need access to both Windows and Linux. They also need to use the computers graphics card (for Photoshop, modeling, etc) under Windows. My question is, will an Ubuntu host/Windows guest or a Windows host/Ubuntu guest be faster? I'm somewhat worried about Windows getting a cluttered registry and slow, but on the otherhand, a Windows host would have direct access to hardware (Unless I'm just unaware of how to grant hardware access to a guest). Does the choice of software (VMware or VirtualBox) effect the choice?

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • Should the virtualization host be allowed to run any service?

    - by Giordano
    I recently setup a virtualization server for the small company I'm running. This server runs few virtual machines that are used for development, testing, etc... My business partner works from a remote location, thus I also installed a vpn server on the virtualization host to make it possible for him to safely reach the company services. Moreover, again on the virtualization host, I installed bacula to perform the backup of the data. Is it advisable/good practice to do so or should I create one more virtual machine to do backups and VPN? Is it a bad idea to run these services on the host itself? If yes, why? Thanks in advance!

    Read the article

  • Error data: line 2 column 1 when using pycurl with gzip stream

    - by Sagar Hatekar
    Thanks for reading. Background: I am trying to read a streaming API feed that returns data in JSON format, and then storing this data to a pymongo collection. The streaming API requires a "Accept-Encoding" : "Gzip" header. What's happening: Code fails on json.loads and outputs - Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) (Refer Error Log below) This does NOT happen while parsing every JSON object - it happens at random. My guess is I am encountering some weird JSON object after every "x" proper JSON objects. I did reference how to use pycurl if requested data is sometimes gzipped, sometimes not? and Encoding error while deserializing a json object from Google but so far have been unsuccessful at resolving this error. Could someone please help me out here? Error Log: Note: The raw dump of the JSON object below is basically using the repr() method. '{"id":"tag:search.twitter.com,2005:207958320747782146","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:493653150","link":"http://www.twitter.com/Deathnews_7_24","displayName":"Death News 7/24","postedTime":"2012-02-16T01:30:12.000Z","image":"http://a0.twimg.com/profile_images/1834408513/deathnewstwittersquare_normal.jpg","summary":"Crashes, Murders, Suicides, Accidents, Crime and Naturals Death News From All Around World","links":[{"href":"http://www.facebook.com/DeathNews724","rel":"me"}],"friendsCount":56,"followersCount":14,"listedCount":1,"statusesCount":1029,"twitterTimeZone":null,"utcOffset":null,"preferredUsername":"Deathnews_7_24","languages":["tr"]},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"web","link":"http://twitter.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","body":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958320747782146","summary":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nytimes.com/2012/05/30/boo\xe2\x80\xa6","indices":[52,72],"expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html","url":"http://t.co/WBsNlNtA"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":11,"urls":[{"url":"http://t.co/WBsNlNtA","expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html?_r=1"}]}}\r\n{"id":"tag:search.twitter.com,2005:207958321003638785","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:178760897","link":"http://www.twitter.com/Mobanu","displayName":"Donald Ochs","postedTime":"2010-08-15T16:33:56.000Z","image":"http://a0.twimg.com/profile_images/1493224811/small_mobany_Logo_normal.jpg","summary":"","links":[{"href":"http://www.mobanuweightloss.com","rel":"me"}],"friendsCount":10272,"followersCount":9698,"listedCount":30,"statusesCount":725,"twitterTimeZone":"Mountain Time (US & Canada)","utcOffset":"-25200","preferredUsername":"Mobanu","languages":["en"],"location":{"objectType":"place","displayName":"Crested Butte, Colorado"}},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"twitterfeed","link":"http://twitterfeed.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Mobanu/statuses/207958321003638785","body":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958321003638785","summary":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","link":"http://twitter.com/Mobanu/statuses/207958321003638785","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nyti.ms/KUmmMa","indices":[116,136],"expanded_url":"http://nyti.ms/KUmmMa","url":"http://t.co/mTsQlNQO"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":12,"urls":[{"url":"http://t.co/mTsQlNQO","expanded_url":"http://well.blogs.nytimes.com/2012/05/30/can-exercise-be-bad-for-you/?utm_medium=twitter&utm_source=twitterfeed"}]}}\r\n' json exception: Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) Header Output: HTTP/1.1 200 OK Content-Type: application/json; charset=UTF-8 Vary: Accept-Encoding Date: Wed, 30 May 2012 22:14:48 UTC Connection: close Transfer-Encoding: chunked Content-Encoding: gzip get_stream.py: #!/usr/bin/env python import sys import pycurl import json import pymongo STREAM_URL = "https://stream.test.com:443/accounts/publishers/twitter/streams/track/Dev.json" AUTH = "userid:passwd" DB_HOST = "127.0.0.1" DB_NAME = "stream_test" class StreamReader: def __init__(self): try: self.count = 0 self.buff = "" self.mongo = pymongo.Connection(DB_HOST) self.db = self.mongo[DB_NAME] self.raw_tweets = self.db["raw_tweets_gnip"] self.conn = pycurl.Curl() self.conn.setopt(pycurl.ENCODING, 'gzip') self.conn.setopt(pycurl.URL, STREAM_URL) self.conn.setopt(pycurl.USERPWD, AUTH) self.conn.setopt(pycurl.WRITEFUNCTION, self.on_receive) self.conn.setopt(pycurl.HEADERFUNCTION, self.header_rcvd) while True: self.conn.perform() except Exception as ex: print "error ocurred : %s" % str(ex) def header_rcvd(self, header_data): print header_data def on_receive(self, data): temp_data = data self.buff += data if data.endswith("\r\n") and self.buff.strip(): try: tweet = json.loads(self.buff, encoding = 'UTF-8') self.buff = "" if tweet: try: self.raw_tweets.insert(tweet) except Exception as insert_ex: print "Error inserting tweet: %s" % str(insert_ex) self.count += 1 if self.count % 10 == 0: print "inserted "+str(self.count)+" tweets" except Exception as json_ex: print "json exception: %s" % str(json_ex) print repr(temp_data) stream = StreamReader()

    Read the article

  • Powershell: Install-dotNET4 function

    - by marc dekeyser
    This function will download and install ,NET 4.0. It uses the Get-Framework-Versions function to determine if the installation is necessary or not. Internet Connectivity will be required as the script auto downloads the setup file (and sleeps for 360 seconds... I had a function in there to monitor for install completion at first, turns out the setup file spawns so many childprocesses the function just got confused and locked up -_-)Alternatively you could drop the installation file in the folder specified on the $folderPath variable too. That will skip the download and use the file. This function easily adapts in to other versions f.e. I use it for Powershell 3 installs as well!Function install-dotNet4 () {    if(($InstalledDotNET -eq "4.0") -or ($InstalledDotNET -eq "4.0c")){        write-host ".NET 4.0 Framework is already installed" -foregroundcolor Green    } else{            #set a var for the folder you are looking for        $folderPath = 'C:\Temp'        #Check if folder exists, if not, create it        if (Test-Path $folderpath){            Write-Host "The folder $folderPath exists." -ForeGroundColor Green        } else{            Write-Host "The folder $folderPath does not exist, creating..." -NoNewline -ForegroundColor Red            New-Item $folderpath -type directory | Out-Null            Write-Host " - done!" -ForegroundColor Green        }        # Check if file exists, if not, download it        $file = $folderPath+"\dotNetFx40_Full_x86_x64.exe"        if (Test-Path $file){            write-host "The file $file exists." -ForeGroundColor Green        } else {            #Download Microsoft .Net 4.0 Framework            Write-Host "Downloading Microsoft .Net 4.0 Framework..." -nonewline -ForeGroundColor DarkYellow            $clnt = New-Object System.Net.WebClient            $url = "http://download.microsoft.com/download/9/5/A/95A9616B-7A37-4AF6-BC36-D6EA96C8DAAE/dotNetFx40_Full_x86_x64.exe"            $clnt.DownloadFile($url,$file)            Write-Host " - done!" -ForegroundColor Green        }        #Install Microsoft .Net Framework        Write-Host "Installing Microsoft .Net Framework..." -nonewline -ForegroundColor DarkYellow        $dotNET4 = $folderPath+"\dotNetFx40_Full_x86_x64.exe /quiet /norestart"        Invoke-Expression $dotNET4        write-host " - done!" -ForegroundColor Green        start-sleep -seconds 360    }}

    Read the article

  • Can't install the wireless driver in HP Pavilion dv2419us

    - by maqtanim
    I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

    Read the article

  • Computer becomes unreachable on lan after some time

    - by Ashfame
    I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

    Read the article

  • Sharepoint list fields stored in content database?

    - by nav
    Hi, I am trying to find out where data for Sharepoint list fields are stored in the content database. For example from the AllLists table filtering on the listid i am intrested in I can derive the following from the tp_ContentTypes column on the field I'm interested in: <Field Type="CascadingDropDownListFieldWithFilter" DisplayName="Secondary Subject" Required="FALSE" ID="{b4143ff9-d5a4-468f-8793-7bb2f06b02a0}" SourceID="{6c1e9bbf-4f02-49fd-8e6c-87dd9f26158a}" StaticName="Secondary_x0020_Subject" Name="Secondary_x0020_Subject" ColName="nvarchar13" RowOrdinal="0" Version="1"><Customization><ArrayOfProperty><Property><Name>SiteUrl</Name><Value xmlns:q1="http://www.w3.org/2001/XMLSchema" p4:type="q1:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">http://lvis.amberlnk.net/knowhow</Value></Property><Property><Name>CddlName</Name><Value xmlns:q2="http://www.w3.org/2001/XMLSchema" p4:type="q2:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">SS</Value></Property><Property><Name>CddlParentName</Name><Value xmlns:q3="http://www.w3.org/2001/XMLSchema" p4:type="q3:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">PS</Value></Property><Property><Name>CddlChildName</Name><Value xmlns:q4="http://www.w3.org/2001/XMLSchema" p4:type="q4:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance"/></Property><Property><Name>ListName</Name><Value xmlns:q5="http://www.w3.org/2001/XMLSchema" p4:type="q5:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">Secondary</Value></Property><Property><Name>ListTextField</Name><Value xmlns:q6="http://www.w3.org/2001/XMLSchema" p4:type="q6:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">Title</Value></Property><Property><Name>ListValueField</Name><Value xmlns:q7="http://www.w3.org/2001/XMLSchema" p4:type="q7:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">Title</Value></Property><Property><Name>JoinField</Name><Value xmlns:q8="http://www.w3.org/2001/XMLSchema" p4:type="q8:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">Primary</Value></Property><Property><Name>FilterField</Name><Value xmlns:q9="http://www.w3.org/2001/XMLSchema" p4:type="q9:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">Content Type ID</Value></Property><Property><Name>FilterOperator</Name><Value xmlns:q10="http://www.w3.org/2001/XMLSchema" p4:type="q10:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">Show All</Value></Property><Property><Name>FilterValue</Name><Value xmlns:q11="http://www.w3.org/2001/XMLSchema" p4:type="q11:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance"/></Property></ArrayOfProperty></Customization></Field> Which table do I need to query to find the data held on this field? Many Thanks Nav

    Read the article

  • Usefulness of packets in wireshark? SSDP protocol, rather than HTTP?

    - by Chris
    I used to be able to filter my wireshark packets to get useful information from them. However, with my current configuration on OSX, all of the HTTP traffic is coming through as the SSDP protocol and is generally being unhelpful. Why is this? Actually, it seems that packets on my own system that should be HTTP are coming throuhg as HTTP, but packets from other machines that should be HTTP are coming through as this protocol.

    Read the article

  • Configure VirtualHost to Rewrite HTTP://subdomain... to HTTPS://internaldirectory

    - by David Kaczynski
    How do I configure Apache to rewrite an http request for a subdomain to an https request for the correct directory? For example, I have the following VirtualHost configuration: However, this turns http://redmine...us into https://redmine...us/redmine. Also, changing RewriteRule ^(.*)$ https://%{HTTP_HOST}/redmine [R] to RewriteRule ^(.*)$ https://%{HTTP_HOST} [R] seems to simply redirect the HTTP request to HTTP://...us, which is currently the default /var/www/index.html page. Any suggestions?

    Read the article

  • How to redirect Cisco IOS's show output to HTTP URL?

    - by yegle
    I found there's a redirect output modifier of Cisco IOS ( version 12.2(53)SE1 ), and there's http: URI support: #sh version | redirect ? flash: Uniform Resource Locator ftp: Uniform Resource Locator http: Uniform Resource Locator https: Uniform Resource Locator nvram: Uniform Resource Locator rcp: Uniform Resource Locator scp: Uniform Resource Locator tftp: Uniform Resource Locator However, I cannot find any document on cisco.com about the http support. I tried sh version | redirect http://my_server/ and cannot find any information on my_server's access log. Can anyone give me a hint?

    Read the article

  • Apache2 graceful restart stops proxying requests to passenger

    - by Rob
    Issue with apache mod proxy, it stops proxying requests after a graceful restart but not all the time. It seems to happen only on a Sunday when a graceful restart is triggered by logrotate. [Sun Sep 9 05:25:06 2012] [notice] SIGUSR1 received. Doing graceful restart [Sun Sep 9 05:25:06 2012] [notice] Apache/2.2.22 (Ubuntu) Phusion_Passenger/3.0.11 configured -- resuming normal operations [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(492) failed in child 26153 for worker proxy:reverse [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(486) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(487) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(489) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(490) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(491) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(480) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(481) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(483) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(484) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(485) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(479) failed in child 26153 for worker http://api.myservice.org/motd.html After these lines, the logs are flooded with 404's because the requests are not being proxied. It's worth noting that the destination is just another vhost on the same apache instance, but the vhost (http://api.myservice.org) is serving passenger (mod_rails) I was thinking that maybe there's some startup issues with the passenger workers not being ready during a graceful restart? After a full restart resolves it and everything returns to normal. //Edit Here's the vhost config, thanks :) <VirtualHost *:80> UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/vhosts> RewriteEngine on AllowOverride All </Directory> RewriteEngine on RewriteCond /var/www/vhosts/%{SERVER_NAME} !-d RewriteCond /var/www/vhosts/%{SERVER_NAME} !-l RewriteRule ^ http://sitenotfound.myservice.org/ [R=302,L] VirtualDocumentRoot /var/www/vhosts/%0/current # Rewrite requests to /assets to map to the /var/file-store/<SERVER_NAME>/ RewriteMap lowercase int:tolower RewriteCond %{REQUEST_URI} ^/assets/ RewriteRule ^/assets/(.*)$ /var/file-store/${lowercase:%{SERVER_NAME}}/$1 # Map /login to /editor.html as it's far friendlier. RewriteCond %{REQUEST_URI} ^/login RewriteRule .* /editor.html [PT] # Forward some requests to the API ProxyPass /api http://api.myservice.org/api ProxyPass /site.json http://api.myservice.org/api/editor/site ProxyPassMatch ^/editor/(.*)$ http://api.myservice.org/editor/$1 ProxyPassMatch ^/api/(.*) http://api.myservice.org/api/$1 ProxyPass /build http://api.myservice.org/build ProxyPass /help http://api.myservice.org/help ProxyPass /motd.html http://api.myservice.org/motd.html <Proxy *> Order allow,deny Allow from all </Proxy> # TODO generate slightly more specific Error Documents for 401/403/500's, # but for now the 404 page is good enough ErrorDocument 401 /404.html ErrorDocument 403 /404.html ErrorDocument 404 /404.html ErrorDocument 500 /404.html </VirtualHost>

    Read the article

  • High Profile ASP.NET websites

    - by nandos
    About twice a month I get asked to justify the reason "Why are we using ASP.NET and not PHP or Java, or buzz-word-of-the-month-here, etc". 100% of the time the questions come from people that do not understand anything about technology. People that would not know the difference between FTP and HTTP. The best approach I found (so far) to justify it to people without getting into technical details is to just say "XXX website uses it". Which I get back "Oh...I did not know that, so ASP.NET must be good". I know, I know, it hurts. But it works. So, without getting into the merit of why I'm using ASP.NET (which could trigger an endless argument for other platforms), I'm trying to compile a list of high profile websites that are implemented in ASP.NET. (No, they would have no idea what StackOverflow is). Can you name a high-profile website implemented in ASP.NET? EDIT: Current list (thanks for all the responses): (trying to avoid tech sites and prioritizing retail sites) Costco - http://www.costco.com/ Crate & Barrel - http://www.crateandbarrel.com/ Home Shopping Network - http://www.hsn.com/ Buy.com - http://www.buy.com/ Dell - http://www.dell.com Nasdaq - http://www.nasdaq.com/ Virgin - http://www.virgin.com/ 7-Eleven - http://www.7-eleven.com/ Carnival Cruise Lines - http://www.carnival.com/ L'Oreal - http://www.loreal.com/ The White House - http://www.whitehouse.gov/ Remax - http://www.remax.com/ Monster Jobs - http://www.monster.com/ USA Today - http://www.usatoday.com/ ComputerJobs.com - http://computerjobs.com/ Match.com - http://www.match.com National Health Services (UK) - http://www.nhs.uk/ CarrerBuilder.com - http://www.careerbuilder.com/

    Read the article

  • getting base url of web site's root (absolute/relative url)

    - by uzay95
    I want to completely understand how to use relative and absolute url address in static and dynamic files. ~ : / : .. : in a relative URL indicates the parent directory . : refers to the current directory / : always replaces the entire pathname of the base URL // : always replaces everything from the hostname onwards This example is easy when you are working without virtual directory. But i am working on virtual directory. Relative URI Absolute URI about.html http://WebReference.com/html/about.html tutorial1/ http://WebReference.com/html/tutorial1/ tutorial1/2.html http://WebReference.com/html/tutorial1/2.html / http://WebReference.com/ //www.internet.com/ http://www.internet.com/ /experts/ http://WebReference.com/experts/ ../ http://WebReference.com/ ../experts/ http://WebReference.com/experts/ ../../../ http://WebReference.com/ ./ http://WebReference.com/html/ ./about.html http://WebReference.com/html/about.html I want to simulate a site below, like my project which is working on virtual directory. These are my aspx and ascx folder http://hostAddress:port/virtualDirectory/MainSite/ASPX/default.aspx http://hostAddress:port/virtualDirectory/MainSite/ASCX/UserCtrl/login.ascx http://hostAddress:port/virtualDirectory/AdminSite/ASPX/ASCX/default.aspx These are my JS Files(which will be use both with the aspx and ascx files): http://hostAddress:port/virtualDirectory/MainSite/JavascriptFolder/jsFile.js http://hostAddress:port/virtualDirectory/AdminSite/JavascriptFolder/jsFile.js this is my static web page address(I want to show some pictures and run inside some js functions): http://hostAddress:port/virtualDirectory/HTMLFiles/page.html this is my image folder http://hostAddress:port/virtualDirectory/Images/PNG/arrow.png http://hostAddress:port/virtualDirectory/Images/GIF/arrow.png if i want to write and image file's link in my ASPX file i should write aspxImgCtrl.ImageUrl = Server.MapPath("~")+"/Images/GIF/arrow.png"; But if i want to write the path hard coded or from javascript file, what kind of url address it should be?

    Read the article

  • can load data(google app enngine) from http://localhost:8100/remote_api ..

    - by zjm1126
    i can download data from gae (http://zjm1126.appspot.com/remote_api), this is code: appcfg.py download_data --application=zjm1126 --url=http://zjm1126.appspot.com/remote_api --filename=a.csv and it successful : D:\zjm_demo\app>appcfg.py download_data --application=zjm1126 --url=http://zjm1 126.appspot.com/remote_api --filename=a.csv Downloading data records. [INFO ] Logging to bulkloader-log-20100618.162421 [INFO ] Throttling transfers: [INFO ] Bandwidth: 250000 bytes/second [INFO ] HTTP connections: 8/second [INFO ] Entities inserted/fetched/modified: 20/second [INFO ] Batch Size: 10 [INFO ] Opening database: bulkloader-progress-20100618.162421.sql3 [INFO ] Opening database: bulkloader-results-20100618.162421.sql3 [INFO ] Connecting to zjm1126.appspot.com/remote_api Please enter login credentials for zjm1126.appspot.com Email: [email protected] Password for [email protected]: [INFO ] Downloading kinds: [u'LogText', u'Greeting', u'Forum', u'Thread'] .... [INFO ] Have 0 entities, 0 previously transferred [INFO ] 0 entities (8804 bytes) transferred in 11.3 seconds so i want to know can load data from 127.0.0.1 , this is my code : appcfg.py download_data --application=zjm1126 --url=http://localhost:8100/remote_api --filename=a.csv and the error is : D:\zjm_demo\app>appcfg.py download_data --application=zjm1126 --url=http://loca lhost:8100/remote_api --filename=a.csv Downloading data records. [INFO ] Logging to bulkloader-log-20100618.162325 [INFO ] Throttling transfers: [INFO ] Bandwidth: 250000 bytes/second [INFO ] HTTP connections: 8/second [INFO ] Entities inserted/fetched/modified: 20/second [INFO ] Batch Size: 10 [INFO ] Opening database: bulkloader-progress-20100618.162325.sql3 [INFO ] Opening database: bulkloader-results-20100618.162325.sql3 Please enter login credentials for localhost Email: [email protected] Password for [email protected]: [INFO ] Connecting to localhost:8100/remote_api [ERROR ] Exception during authentication Traceback (most recent call last): File "d:\Program Files\Google\google_appengine\google\appengine\tools\bulkload er.py", line 3169, in Run self.request_manager.Authenticate() File "d:\Program Files\Google\google_appengine\google\appengine\tools\bulkload er.py", line 1178, in Authenticate remote_api_stub.MaybeInvokeAuthentication() File "d:\Program Files\Google\google_appengine\google\appengine\ext\remote_api \remote_api_stub.py", line 542, in MaybeInvokeAuthentication datastore_stub._server.Send(datastore_stub._path, payload=None) File "d:\Program Files\Google\google_appengine\google\appengine\tools\appengin e_rpc.py", line 346, in Send f = self.opener.open(req) File "D:\Python25\lib\urllib2.py", line 387, in open response = meth(req, response) File "D:\Python25\lib\urllib2.py", line 498, in http_response 'http', request, response, code, msg, hdrs) File "D:\Python25\lib\urllib2.py", line 425, in error return self._call_chain(*args) File "D:\Python25\lib\urllib2.py", line 360, in _call_chain result = func(*args) File "D:\Python25\lib\urllib2.py", line 506, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) HTTPError: HTTP Error 404: Not Found [INFO ] Authentication Failed so what should i do , thanks

    Read the article

  • OpenCV install problems on Studio 12.04 - broken dependencies

    - by Will
    I'm trying to follow the Ubuntu OpenCV documentation at OpenCV. The provided script has a line which executed for some time, taking away more packages than I expected (such as ubuntu-studio video); sudo apt-get -qq remove ffmpeg x264 libx264-dev When the script gets to the line below, it bombs; sudo apt-get -qq install libopencv-dev build-essential checkinstall cmake pkg-config yasm libtiff4-dev libjpeg-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev python-dev python-numpy libtbb-dev libqt4-dev libgtk2.0-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils ffmpeg The error msg is; E: Unable to correct problems, you have held broken packages. I've since run Update-Manager, run sudo apt-get updates, rebooted, tried the above script line manually, and still no change. I've just run sudo apt-get install -f and nothing seemed to change. It did mention that some packages were no longer needed and could be removed by apt-get autoremove, so I ran that. It removed a number of packages, so I reran the install command above. Still same problem of held broken packages. I just ran sudo apt-get -u dist-upgrade Part of the response was; The following packages have been kept back: gstreamer0.10-ffmpeg I'm not sure what that means. I do know that it shows up in my Update-Manager and cannot be checked I then ran sudo dpkg --configure -a and then reran sudo apt-get -f install and the package was still not upgraded, though there was this very interesting comment; Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-ffmpeg : Depends: libavcodec53 (< 5:0) but it is not going to be installed or libavcodec-extra-53 (< 5:0) but 5:0.7.2-1ubuntu1+codecs1~oneiric2 is to be installed E: Unable to correct problems, you have held broken packages. Then I ran sudo apt-get -u dist-upgrade It showed I had one held package, so I ran; sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade It also exited without upgrading the package, so I ran; sudo apt-get remove --dry-run gstreamer0.10-ffmpeg:i386 And it gave me; *The following packages will be REMOVED: arista gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. Remv arista [0.9.7-3ubuntu1] Remv gstreamer0.10-ffmpeg [0.10.12-1ubuntu1]* But when I reran sudo apt-get -u dist-upgrade It showed the package was still there. *The following packages have been kept back: gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.* Update: Just went into Synaptic PM and completely removed gstreamer0.10-ffmpeg Reran sudo apt-get -u dist-upgrade And was told; 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. However, when I ran the original apt-get to install opencv (first code at the top of this question), it still gave me the same broken package errors. So I tried $ cat /etc/apt/sources.list # # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ precise universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main # deb http://download.opensuse.org/repositories/home:/popinet/xUbuntu_11.04 ./ # disabled on upgrade to precise and then; $ cat /etc/apt/sources.list.d/* But I don't have enough reputation to post the results here (it says I need at least 10 reputation points to post more than 2 links), so I don't know how to provide the requested feedback. Then tried; $ sudo apt-get check [sudo] password for <abcd>: Reading package lists... Done Building dependency tree Reading state information... Done However, no resolution of the problem yet. What else do I need to do? Will an upgrade to Ubuntu Studio 13.xx solve this problem (or compound it)?

    Read the article

  • Useful links for InfoPath form development

    - by ybbest
    Powershell http://msdn.microsoft.com/en-us/library/ms442691.aspx http://technet.microsoft.com/en-us/library/ee806878.aspx http://sharepoint.microsoft.com/blogs/zach/Lists/Posts/Post.aspx?ID=7 InfoPath http://msdn.microsoft.com/en-us/library/aa943232.aspx http://blah.winsmarts.com/2008-8-Deploying_InfoPath_2007_Forms_to_Forms_Server_-and-ndash_Properly.aspx http://msdn.microsoft.com/en-us/library/microsoft.office.infopath.server.administration.xsnfeaturereceiver.aspx http://www.articlesbase.com/web-hosting-articles/sharepoint-hosting-3-ways-to-deploy-infopath-form-templates-to-sharepoint-2605874.html http://jopx.blogspot.com/2006/08/infopath-2007-solving-xsn-can-not-be.html

    Read the article

  • my site works with www.my site.com but not like this http://www.my site.com

    - by toocool
    this is the site that I am going to develop: http://www.juve-news.com/ it works like this but it doesnt when I try to open it without the www prefix. it give me 400 bad request! I have used other web host before now I am trying a new one and I have to add some dns entries like in the picture here: http://cloudcontrol.com/developers/documentation/add-ons/aliases/ I dont know what I have done wrong. If anyone knows what could be the problem then please give me a tip.

    Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >