Search Results

Search found 9545 results on 382 pages for 'least privilege'.

Page 173/382 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• As a programmer, what's the most valuable non-English (human) language to learn?

  - by Andrew M

  I was thinking that with my developer skills, learning new languages like French, German etc. might be easier for me now. I could setup the verbs as objects in Python and use dir(verb) to find its methods, tenses and stuff ;-) But seriously, if you're a professional developer, in my case in the UK, what's the best foreign language to learn from an employment perspective? I'm thinking, like Hindi - if all our programming jobs are getting outsourced to India, might as well position yourself to be the on-site, go-between guy. Mandarin - if the Chinese become the pre-eminent economy, the new USA, in ten or twenty years, then speaking their language would open up a huge market to you. Russian - maybe another major up-and-comer, but already closer to Western standards. More IT-sector growth here than anywhere else in the coming years? Japanese - drivers of global technology, being able to speak their language could give you a big competitive advantage over other Westerners But I'm just guessing/musing with all these points. If you have an opinion, or even better, some evidence, I'd like to hear it. If the programming things falls through then at least it'll make for more interesting holidays.

  Read the article

• What would be the fastest way of storing or calculating legal move sets for chess pieces?

  - by ioSamurai

  For example if a move is attempted I could just loop through a list of legal moves and compare the x,y but I have to write logic to calculate those at least every time the piece is moved. Or, I can store in an array [,] and then check if x and y are not 0 then it is a legal move and then I save the data like this [0][1][0][0] etc etc for each row where 1 is a legal move, but I still have to populate it. I wonder what the fastest way to store and read a legal move on a piece object for calculation. I could use matrix math as well I suppose but I don't know. Basically I want to persist the rules for a given piece so I can assign a piece object a little template of all it's possible moves considering it is starting from it's current location, which should be just one table of data. But is it faster to loop or write LINQ queries or store arrays and matrices? public class Move { public int x; public int y; } public class ChessPiece : Move { private List<Move> possibleMoves { get; set; } public bool LegalMove(int x, int y){ foreach(var p in possibleMoves) { if(p.x == x && p.y == y) { return true; } } } } Anyone know?

  Read the article

• Are there any good examples of open source C# projects with a large number of refactorings?

  - by Arjen Kruithof

  I'm doing research into software evolution and C#/.NET, specifically on identifying refactorings from changesets, so I'm looking for a suitable (XP-like) project that may serve as a test subject for extracting refactorings from version control history. Which open source C# projects have undergone large (number of) refactorings? Criteria A suitable project has its change history publicly available, has compilable code at most commits and at least several refactorings applied in the past. It does not have to be well-known, and the code quality or number of bugs is irrelevant. Preferably the code is in a Git or SVN repository. The result of this research will be a tool that automatically creates informative, concise comments for a changeset. This should improve on the common development practice of just not leaving any comments at all. EDIT: As Peter argues, ideally all commit comments would be teleological (goal-oriented). Practically, if a comment is made at all it is often descriptive, merely a summary of the changes. Sadly we're a long way from automatically inferring developer intentions!

  Read the article

• Is There a Cloud Over OpenWorld?

  - by Tony Berk

  If you have been to OpenWorld in the past, you know it can be overwhelming or at least a bit "large." If this is your first time at OpenWorld, get ready! You are in for a big (or I should say HUGE) treat. The first thing you'll notice when you get to San Francisco is there are a lot of people, buses with "Oracle" posters, large exhibit halls filled with demos, games and tchotchkes from vendors with hot new solutions, and then there are the sessions. Yes, in fact there are over 2000 sessions. How can you possibly sort through 2000 sessions to find the best 20 or so for you? Which are the 1% for you? We will try to help with some insight over the next few weeks.  I'm going start at the highest level. Up in the Clouds! Since I know many people are looking for an update on The Oracle Cloud. We will drill down into the cloud and other topics for CRM and Customer Experience sessions in the next set of posts. Below is a list of some of the Oracle executive keynotes during OpenWorld highlighting The Oracle Cloud and applications related topics (the full list is here). In these sessions you will get details on Oracle's strategy and how Oracle is changing the industry to help our customers be more efficient, effective and innovative. Sunday, September 30 6:00pm - 7:00pm Larry Ellison: Hardware and Software, Engineered to Work Together: Why it's a Different Approach Tuesday, October 2 8:45am - 9:45am Thomas Kurian: The Oracle Cloud: Oracle's Cloud Platform and Application's Strategy Tuesday, October 2 3:30pm - 4:30pm Larry Ellison: The Oracle Cloud: Where Social is Built in Thursday, October 4 9:45am - 10:45am Mark Hurd: See More, Act Faster: Oracle Business Analytics We encourage you to also join the keynotes on the Oracle Database and Cloud Infrastructure and the fascinating partner keynotes, as well. Check the full list on the OpenWorld site. Oh, if you haven't registered yet, what are you waiting for? OpenWorld Registration Details.

  Read the article

• Problems after installing a plethora of updates

  - by box

  yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

  Read the article

• Wireless on ThinkPad Edge E420s

  - by user21820

  I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

  Read the article

• Cube rotation DX10

  - by German

  Well I'm reading the Frank's Luna DirectX10 book and, while I'm trying to understand the first demo, I found something that's not very clear at least for me. In the updateScene method, when I press A, S, W or D, the angles mTheta and mPhi change, but after that, there are three lines of code that I don't understand exactly what they do: // Convert Spherical to Cartesian coordinates: mPhi measured from +y // and mTheta measured counterclockwise from -z. float x = 5.0f*sinf(mPhi)*sinf(mTheta); float z = -5.0f*sinf(mPhi)*cosf(mTheta); float y = 5.0f*cosf(mPhi); I mean, this explains that they do, it says that it converts the spherical coordinates to cartesian coordinates, but, mathematically, why? why the x value is calculated by the product of the sins of both angles? And the z by the product of the sine and cosine? and why the y just uses the cosine? After that, those values (x, y and z) are used to build the view matrix. The book doesn't explain (mathematically) why those values are calculated like that (and I didn't find anything to help me to understand it at the first Part of the book: "Mathematical prerequisites"), so it would be good if someone could explain me what exactly happen in those code lines or just give me a link that helps me to understand the math part. Thanks in advance!

  Read the article

• An algorithm for finding subset matching criteria?

  - by Macin

  I recently came up with a problem which I would like to share some thoughts about with someone on this forum. This relates to finding a subset. In reality it is more complicated, but I tried to present it here using some simpler concepts. To make things easier, I created this conceptual DB model: Let's assume this is a DB for storing recipes. Recipe can have many instructions steps and many ingredients. Ingredients are stored in a cupboard and we know how much of each ingredient we have. Now, when we create a recipe, we have to define how much of each ingredient we need. When we want to use a recipe, we would just check if required amount is less than available amount for each product and then decide if we can cook a dinner - if amount required for at least one ingredient is less than available amount - recipe cannot be cooked. Simple sql query to get the result. This is straightforward, but I'm wondering, how should I work when the problem is stated the other way round, i.e. how to find recipies which can be cooked only from ingredients that are available? I hope my explanation is clear, but if you need any more clarification, please ask.

  Read the article

• How to Program AWS Spot Instances to Strategically Bid So the Auction is Never Lost Until a Competitor Beats the Maximum I'm Willing to Pay?

  - by Taal

  I believe I'm in the right section of stack exchange to ask this. If not, let me know. I only use Amazon Web Services for temporary type hosting services, so the spot instances are quite valuable to me. I would also just make an instance and start and stop it - but - that doesn't necessarily fit my bootstrapped budget sadly. Anyways, it really kills me when someone outbids me on a spot instance I have (I tend to go for the larger ones which there are fewer of available) and I get randomly kicked off. I know or at least I believe there is a way to program in something somehow to dynamically change your bidding price to beat a potential competitor's if their's is higher than yours. Now, I previously believed Amazon would just charge me for the highest price right above the next lowest competitor automatically (eliminating the need for this) - so if I bid too high, then I only pay what I would of needed to in order to win and keep the auction. Essentially, I thought my bid price was my max bid price. Apparently, according to my bills and several experiments I've done - this is not the case. They charge me for whatever I bid even when I know there is no one else around to counter bid me. I needed to clarify that, but let me get back to the main point: Let's say I'm bidding $0.50, competitor comes in and bids 0.55 cents. I get kicked off. I want to have it to where I'd set a maximum I'm willing to pay (let's say $1.00 here), and then when competitor comes in and tries to bid $.55, my bid is dynamically adjusted to beat his at $0.56 up until he breaks my $1.00 threshold. I've been reading the guides and although they are more or less straightforward, I feel like they leave a few holes in them that end up confusing me. Like, for instance, where do I input said command or when do I do it? Maybe I'm just tech illiterate and need help deciphering these guides. A good start for someone willing to answer/help me decipher this problem would be here: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-as-update-bid.html

  Read the article

• "The volume filesystem root has only..."

  - by jcslzr

  I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

  Read the article

• Functional Programming, JavaScript and UI - some neophyte questions

  - by jamesson

  This has been discussed in other threads, however I am hoping for some comments relevant to UI and an explanation of some vitriol I had flung my way in a Certain IRC Channel Which shall remain nameless. In the discussion here, the comments in the accepted answer suggest that I approach the given code from a functional perspective, which was new to me at the time. Wikipedia said, among other things, that FP "avoids state and mutable data", which includes according to the discussion global vars. Now, being that I am already pretty far along in my project I am not going to learn FP before I finish, but... How is it possible to avoid global vars if, for instance, I have a UI whose entire functionality changes if a mousebutton is down? I have a number of things like this. Why was there a strong negative reaction in the Certain IRC channel to implementing FP in JS? When I Brought up what seemed to me to be supportive comments by Crockford, people got even madder. Now, this being IRC there is no rep system, but they at least gave indication of having read TGP (which I haven't gotten to yet) so I'm assuming they're not idiots. Many thanks in advance Joe

  Read the article

• Am I running out of memory or do I have two logical drives instead of one

  - by user30904

  I did a complete reinstall of Ubuntu 13.04 a couple of months ago. Since then, I have switched out my motherboard with another. I kept the same hard drive. I just did an upgrade to 13.10. Recently, after this install, I keep getting the message that I'm running out of memory. I just checked my system usage and was surprised by what I found. I believed that I installed Ubuntu as a fresh install but when I check the system usage, it seems like there are two logical drives. I just did the basic install, so I was only expecting to see one partition but instead I see two. One is a small 300mb partition, the other is a 300gb partition I was expecting. Can anyone tell me if I have two partitions and/or logical drives and if so how I can fix this? I seem to have been running on the smaller drive and now I'm obviously out of space. I want to be able to use the bigger one at least.

  Read the article

• Most common parts of a SELECT SQL query?

  - by jnrbsn

  I'm writing a function that generates a SELECT SQL query. (I'm not looking for a tool that already does this.) My function currently takes the following arguments which correspond to different parts of the SELECT query (the base table name is already known): where order fields joins group limit All of these arguments will be optional so that the function generates something like this by default: SELECT * FROM `table_name` I want to order the arguments so that the most often used parts of a SELECT query are first. That way the average call to the function will use as few of the arguments as possible rather than passing a null value or something like that to skip an argument. For example, if someone wanted to use the 1st and 3rd arguments but not the rest, they might have to pass a null value as the 2nd argument in order to skip it. So, for general purpose use, how should I order the arguments? Edit: To be more precise, out of the query parts I listed above, what is the order from most used to least used? Also, I'm not looking for solutions that allow me to not have to specify the order. Edit #2: The "fields" argument will default to "*" (i.e all fields/columns).

  Read the article

• How to get Nvidia 555M working on Ubuntu 12.10 (drivers, optimus, cuda)?

  - by bluudz

  I'm trying for few days to get my GPU working properly on Alienware M14x with GPU NVidia 555M, but I have no luck at all. After fresh ubuntu install I did follow the guide here NVIDIA Optimus and Ubuntu 12.10 and istalled Bumblebee without problems. Tested glxspheres/optirun glxspheres both working fine. Now I was continuing to install CUDA as is said here How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? but I'm getting: Driver: Not Selected Toolkit: Installation Failed. Using unsupported Compiler. Samples: Installation Failed. Missing required libraries. I did not select the driver as I though Bumblebee installed driver already. How should I proceed? And also at what point is the NVidia driver being installed and how can I try its working? Bumblebee seems to be installing the driver, CUDA wants to do the same, its all a bit confusing really. Sorry if its lame question, but I would really want to at least get graphic card and second screen working.. Thank you for any help.

  Read the article

• Should I expect my peers to read or practice on a regular basis? [closed]

  - by Joshua Smith

  I've been debating asking this question for some time. Based several of the comments I read in this question I decided I had to ask. This feels like I'm stating the obvious, but I believe that regular reading (of books, blogs, StackOverflow, whatever) and/or practice are required just to stay current (let alone excel) in whichever stack you use to pay the bills, not to mention playing with things outside your comfort zone to learn new ways of doing things. Yet, I virtually never see this from many of my peers. Even when I go out of my way to point out useful (and almost always free) learning material, I quite often get a sense of total apathy from those I'm speaking to. I'd even go so far as to say that if someone doesn't try to improve (or at least stay current), they'll atrophy as technology advances and actually become less useful to the company. I don't expect people to spend hours a day studying or practicing. I have two young kids and hours of practice simply aren't feasible. Still, I find some time; perhaps on the train, at lunch, in bed for a few minutes, whatever. I'm willing to believe this is arrogance or naivete on my part, but I'd like to hear what the community has to say. So here's my question: Should I expect (and encourage) the same from my peers, or just keep my mouth shut and do my own thing?

  Read the article

• How do I cluster strings based on a relation between two strings?

  - by Tom Wijsman

  If you don't know WEKA, you can try a theoretical answer. I don't need literal code/examples... I have a huge data set of strings in which I want to cluster the strings to find the most related ones, these could as well be seen as duplicate. I already have a set of couples of string for which I know that they are duplicate to each other, so, now I want to do some data mining on those two sets. The result I'm looking for is a system that would return me the possible most relevant couples of strings for which we don't know yet that they are duplicates, I believe that I need clustering for this, which type? Note that I want to base myself on word occurrence comparison, not on interpretation or meaning. Here is an example of two string of which we know they are duplicate (in our vision on them): The weather is really cold and it is raining. It is raining and the weather is really cold. Now, the following strings also exist (most to least relevant, ignoring stop words): Is the weather really that cold today? Rainy days are awful. I see the sunshine outside. The software would return the following two strings as most relevant, which aren't known to be duplicate: The weather is really cold and it is raining. Is the weather really that cold today? Then, I would mark that as duplicate or not duplicate and it would present me with another couple. How do I go to implement this in the most efficient way that I can apply to a large data set?

  Read the article

• How can I design my classes for a calendar based on database events?

  - by Gianluca78

  I'm developing a web calendar in php (using Symfony2) inspired by iCal for a project of mine. At this moment, I have two classes: a class "Calendar" and a class "CalendarCell". Here you are the two classes properties and method declarations. class Calendar { private $month; private $monthName; private $year; private $calendarCellList = array(); private $translator; public function __construct($month, $year, $translator) {} public function getCalendarCells() {} public function getMonth() {} public function getMonthName() {} public function getNextMonth() {} public function getNextYear() {} public function getPreviousMonth() {} public function getPreviousYear() {} public function getYear() {} private function calculateDaysPreviousMonth() {} private function calculateNumericDayOfTheFirstDayOfTheWeek() {} private function isCurrentDay(\DateTime $dateTime) {} private function isDifferentMonth(\DateTime $dateTime) {} } class CalendarCell { private $day; private $month; private $dayNameAbbreviation; private $numericDayOfTheWeek; private $isCurrentDay; private $isDifferentMonth; private $translator; public function __construct(array $parameters) {} public function getDay() {} public function getMonth() {} public function getDayNameAbbreviation() {} public function isCurrentDay() {} public function isDifferentMonth() {} } Each calendar day can includes many events stored in a database. My question is: which is the best way to manage these events in my classes? I think to add a eventList property in CalendarCell and populate it with an array of CalendarEvent objects fetched by the database. This kind of solution doesn't allow other coders to reuse the classes without db (because I should inject at least a repository services also) just to create and visualize a calendar... so maybe it could be better to extend CalendarCell (for instance in CalendarCellEvent) and add the database features? I feel like I'm missing some crucial design pattern! Any suggestion will be very appreciated!

  Read the article

• How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

  - by 770

  I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

  Read the article

• Google Chrome with strange behavior

  - by user72274

  I'm former Chromium-browser user, but after not upgrading the PPA for 2 months, I switched to Google Chrome browser yesterday. Everything is okay, except some strange behavior on some pages and crashing after loading "chrome://" configuration pages. The best known website with strange behavior is youtube, there is a picture what I see: When I open user menu in top right corner, it crashes that way and even after closing the menu, some parts of menu stay display. You may say it's Youtube problem, no, I have this problem at least on three other websites, here it is on Imgur: The problem isn't for the whole side, sometimes it happens from the middle of the screen. The interesting part is that it happens everytime in the same distance from the right border. When I check the DOM elements with the Developer tool, the overlay which shows element's position is rendered how it should be. What is more, if there is anchor after the crashed area, it works after clicking on it. Selecting text in crashed page is impossible. I hope there is enough information to give me an advice, thanks in advance. :) EDIT: Here is what the browser posted in "chrome://gpu-internals/": Graphics Feature Status Canvas: Software only, hardware acceleration unavailable Compositing: Hardware accelerated 3D CSS: Hardware accelerated CSS Animation: Software animated. WebGL: Hardware accelerated WebGL multisampling: Hardware accelerated Problems Detected Accelerated CSS animation has been disabled at the command line. Accelerated 2d canvas is unstable in Linux at the moment. Ubuntu 12.04 | Gnome-shell 3.4.1 | ATI Radeon 4550 | Screen resolution 1024*768 | Chrome version 20.0.1132.57 (Official Build 145807)

  Read the article

• Automated BizTalk documentation

  - by Kevin Shyr

  Yay, this should help us going through old legacy app with no doc, at least some help. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://biztalkdocumenter.codeplex.com/

  Read the article

• Is the addition of a duration to a date-time defined in ISO 8601?

  - by Benjamin

  I've writing a date-time library, and need to implement the addition of a duration to a date-time. If I add a 1 month duration: P1M to the 31st March 2012: 2012-03-31, does the standard define what the result is? Because the resulting date (31st April) does not exist, there are at least two options: Fall back to the last day of the resulting month. This is the approach currently taken by the ThreeTen API, the (alpha) reference implementation of JSR-310: ZonedDateTime date = ZonedDateTime.parse("2012-03-31T00:00:00Z"); Period duration = Period.parse("P1M"); System.out.println(date.plus(duration).toString()); // 2012-04-30T00:00Z Carry the extra day to the next month. This is the approach taken by the DateTime class in PHP: $date = new DateTime('2012-03-31T00:00:00Z'); $duration = new DateInterval('P1M'); echo $date->add($duration)->format('c'); // 2012-05-01T00:00:00+00:00 I'm surprised that two date-time libraries contradict on this point, so I'm wondering whether the standard defines the result of this operation?

  Read the article

• What to do if you find a vulnerability in a competitor's site?

  - by user17610

  While working on a project for my company, I needed to build functionality that allows users to import/export data to/from our competitor's site. While doing this, I discovered a very serious security exploit that could, in short, perform any script on the competitor's website. My natural feeling is to report the issue to them in the spirit of good-will. Exploiting the issue to gain advantage crossed my mind, but I don't want to go down that path. So my question is, would you report a serious vulnerability to your direct competition, in order to help them? Or would you keep your mouth shut? Is there a better way of going about this, perhaps to gain at least some advantage from the fact that I'm helping them by reporting the issue? Update (Clarification): Thanks for all your feedback so far, I appreciate it. Would your answers change if I were to add that the competition in question is a behemoth in the market (hundreds of employees in several continents), and my company only started a few weeks ago (three employees)? It goes without saying, they most definitely will not remember us, and if anything, only realize that their site needs work (which is why we entered this market in the first place). I confess this is one of those moral vs. business toss-ups, but I appreciate all the advice.

  Read the article

• Error on /home prevents OS boot

  - by mdrg

  Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

  Read the article

• What strategy should be employed to access Facebook data offline?

  - by user686021

  I'm working on a project similar to Klout which provides detail about how you influence other people and who influenced you. We'll be fetching data from few social networking sites (i.e linked in, facebook, twitter etc) to analyze how users interacts with one another. For that we need to parse the data and store it in db and have to analyze it so that strength of relation of two user can be decided. We'll be accessing data offline as well to provide them with accurate results. If we consider facebook activities, we need to have access to Facebook users' news feed, wall data which includes likes,comments,shares etc. To decide how one user influence other, we'll store all the data and analyze it. I need suggestions on what steps need to be taken for great performance. We'll be using ASP.Net(C#) Web forms, SQL Server, jQuery. Main concern is parsing of data, it's storage and retrieval with least overhead. For that I've summarized few points as below : Should we switch over to document-oriented database, like MongoDB or RavenDB for the whole app or part of it even though none of team member have experience with them? Should we use SQL Server Analysis service? Is there any other library than Json.NET for parsing data? Is it advisable to use any C# library over FQL + GET Request ? I've tried to provide as much info as possible. Please share your views for the same.

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >