Search Results

Search found 4493 results on 180 pages for 'operator keyword'.

Page 173/180 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• 5 Lessons learnt in localization / multi language support in WPF

  - by MarkPearl

  For the last few months I have been secretly working away at the second version of an application that we initially released a few years ago. It’s called MaxCut and it is a free panel/cut optimizer for the woodwork, glass and metal industry. One of the motivations for writing MaxCut was to get an end to end experience in developing an application for general consumption. From the early days of v1 of MaxCut I would get the odd email thanking me for the software and then listing a few suggestions on how to improve it. Two of the most dominant suggestions that we received were… Support for imperial measurements (the original program only supported the metric system) Multi language support (we had someone who volunteered to translate the program into Japanese for us). I am not going to dive into the Imperial to Metric support in todays blog post, but I would like to cover a few brief lessons we learned in adding support for multi-language functionality in the software. I have sectioned them below under different lessons. Lesson 1 – Build multi-language support in from the start So the first lesson I learnt was if you know you are going to do multi language support – build it in from the very beginning! One of the power points of WPF/Silverlight is data binding in XAML and so while it wasn’t to painful to retro fit multi language support into the programing, it was still time consuming and a bit tedious to go through mounds and mounds of views and would have been a minor job to have implemented this while the form was being designed. Lesson 2 – Accommodate for varying word lengths using Grids The next lesson was a little harder to learn and was learnt a bit further down the road in the development cycle. We developed everything in English, assuming that other languages would have similar character length words for equivalent meanings… don’t!. A word that is short in your language may be of varying character lengths in other languages. Some language like Dutch and German allow for concatenation of nouns which has the potential to create really long words. We picked up a few places where our views had been structured incorrectly so that if a word was to long it would get clipped off or cut out. To get around this we began using the WPF grid extensively with column widths that would automatically expand if they needed to. Generally speaking the grid replacement got round this hurdle, and if in future you have a choice between a stack panel or a grid – think twice before going for the easier option… often the grid will be a bit more work to setup, but will be more flexible. Lesson 3 – Separate the separators Our initial run through moving the words to a resource dictionary led us to make what I thought was one potential mistake. If we had a label like the following… “length : “ In the resource dictionary we put it as a single entry. This is fine until you start using a word more than once. For instance in our scenario we used the word “length’ frequently. with different variations of the word with grammar and separators included in the resource we ended up having what I would consider a bloated dictionary. When we removed the separators from the words and put them as their own resources we saw a dramatic reduction in dictionary size… so something that looked like this… “length : “ “length. “ “length?” Was reduced to… “length” “:” “?” “.” While this may not seem like a reduction at first glance, consider that the separators “:?.” are used everywhere and suddenly you see a real reduction in bloat. Lesson 4 – Centralize the Language Dictionary This lesson was learnt at the very end of the project after we had already had a release candidate out in the wild. Because our translations would be done on a volunteer basis and remotely, we wanted it to be really simple for someone to translate our program into another language. As a common design practice we had tiered the application so that we had a business logic layer, a ui layer, etc. The problem was in several of these layers we had resource files specific for that layer. What this resulted in was us having multiple resource files that we would need to send to our translators. To add to our problems, some of the wordings were duplicated in different resource files, which would result in additional frustration from our translators as they felt they were duplicating work. Eventually the workaround was to make a separate project in VS2010 with just the language translations. We then exposed the dictionary as public within this project and made it as a reference to the other projects within the solution. This solved out problem as now we had a central dictionary and could remove any duplication's. Lesson 5 – Make a dummy translation file to test that you haven’t missed anything The final lesson learnt about multi language support in WPF was when checking if you had forgotten to translate anything in the inline code, make a test resource file with dummy data. Ideally you want the data for each word to be identical. In our instance we made one which had all the resource key values pointing to a value of test. This allowed us point the language file to our test resource file and very quickly browse through the program and see if we had missed any linking. The alternative to this approach is to have two language files and swap between the two while running the program to make sure that you haven’t missed anything, but the downside of dual language file approach is that it is much a lot harder spotting a mistake if everything is different – almost like playing Where’s Wally / Waldo. It is much easier spotting variance in uniformity – meaning when you put the “test’ keyword for everything, anything that didn’t say “test” stuck out like a sore thumb. So these are my top five lessons learnt on implementing multi language support in WPF. Feel free to make any suggestions in the comments section if you feel maybe something is more important than one of these or if I got it wrong!

  Read the article

• Online ALTER TABLE in MySQL 5.6

  - by Marko Mäkelä

  This is the low-level view of data dictionary language (DDL) operations in the InnoDB storage engine in MySQL 5.6. John Russell gave a more high-level view in his blog post April 2012 Labs Release – Online DDL Improvements. MySQL before the InnoDB Plugin Traditionally, the MySQL storage engine interface has taken a minimalistic approach to data definition language. The only natively supported operations were CREATE TABLE, DROP TABLE and RENAME TABLE. Consider the following example: CREATE TABLE t(a INT); INSERT INTO t VALUES (1),(2),(3); CREATE INDEX a ON t(a); DROP TABLE t; The CREATE INDEX statement would be executed roughly as follows: CREATE TABLE temp(a INT, INDEX(a)); INSERT INTO temp SELECT * FROM t; RENAME TABLE t TO temp2; RENAME TABLE temp TO t; DROP TABLE temp2; You could imagine that the database could crash when copying all rows from the original table to the new one. For example, it could run out of file space. Then, on restart, InnoDB would roll back the huge INSERT transaction. To fix things a little, a hack was added to ha_innobase::write_row for committing the transaction every 10,000 rows. Still, it was frustrating that even a simple DROP INDEX would make the table unavailable for modifications for a long time. Fast Index Creation in the InnoDB Plugin of MySQL 5.1 MySQL 5.1 introduced a new interface for CREATE INDEX and DROP INDEX. The old table-copying approach can still be forced by SET old_alter_table=0. This interface is used in MySQL 5.5 and in the InnoDB Plugin for MySQL 5.1. Apart from the ability to do a quick DROP INDEX, the main advantage is that InnoDB will execute a merge-sort algorithm before inserting the index records into each index that is being created. This should speed up the insert into the secondary index B-trees and potentially result in a better B-tree fill factor. The 5.1 ALTER TABLE interface was not perfect. For example, DROP FOREIGN KEY still invoked the table copy. Renaming columns could conflict with InnoDB foreign key constraints. Combining ADD KEY and DROP KEY in ALTER TABLE was problematic and not atomic inside the storage engine. The ALTER TABLE interface in MySQL 5.6 The ALTER TABLE storage engine interface was completely rewritten in MySQL 5.6. Instead of introducing a method call for every conceivable operation, MySQL 5.6 introduced a handful of methods, and data structures that keep track of the requested changes. In MySQL 5.6, online ALTER TABLE operation can be requested by specifying LOCK=NONE. Also LOCK=SHARED and LOCK=EXCLUSIVE are available. The old-style table copying can be requested by ALGORITHM=COPY. That one will require at least LOCK=SHARED. From the InnoDB point of view, anything that is possible with LOCK=EXCLUSIVE is also possible with LOCK=SHARED. Most ALGORITHM=INPLACE operations inside InnoDB can be executed online (LOCK=NONE). InnoDB will always require an exclusive table lock in two phases of the operation. The execution phases are tied to a number of methods: handler::check_if_supported_inplace_alter Checks if the storage engine can perform all requested operations, and if so, what kind of locking is needed. handler::prepare_inplace_alter_table InnoDB uses this method to set up the data dictionary cache for upcoming CREATE INDEX operation. We need stubs for the new indexes, so that we can keep track of changes to the table during online index creation. Also, crash recovery would drop any indexes that were incomplete at the time of the crash. handler::inplace_alter_table In InnoDB, this method is used for creating secondary indexes or for rebuilding the table. This is the ‘main’ phase that can be executed online (with concurrent writes to the table). handler::commit_inplace_alter_table This is where the operation is committed or rolled back. Here, InnoDB would drop any indexes, rename any columns, drop or add foreign keys, and finalize a table rebuild or index creation. It would also discard any logs that were set up for online index creation or table rebuild. The prepare and commit phases require an exclusive lock, blocking all access to the table. If MySQL times out while upgrading the table meta-data lock for the commit phase, it will roll back the ALTER TABLE operation. In MySQL 5.6, data definition language operations are still not fully atomic, because the data dictionary is split. Part of it is inside InnoDB data dictionary tables. Part of the information is only available in the *.frm file, which is not covered by any crash recovery log. But, there is a single commit phase inside the storage engine. Online Secondary Index Creation It may occur that an index needs to be created on a new column to speed up queries. But, it may be unacceptable to block modifications on the table while creating the index. It turns out that it is conceptually not so hard to support online index creation. All we need is some more execution phases: Set up a stub for the index, for logging changes. Scan the table for index records. Sort the index records. Bulk load the index records. Apply the logged changes. Replace the stub with the actual index. Threads that modify the table will log the operations to the logs of each index that is being created. Errors, such as log overflow or uniqueness violations, will only be flagged by the ALTER TABLE thread. The log is conceptually similar to the InnoDB change buffer. The bulk load of index records will bypass record locking. We still generate redo log for writing the index pages. It would suffice to log page allocations only, and to flush the index pages from the buffer pool to the file system upon completion. Native ALTER TABLE Starting with MySQL 5.6, InnoDB supports most ALTER TABLE operations natively. The notable exceptions are changes to the column type, ADD FOREIGN KEY except when foreign_key_checks=0, and changes to tables that contain FULLTEXT indexes. The keyword ALGORITHM=INPLACE is somewhat misleading, because certain operations cannot be performed in-place. For example, changing the ROW_FORMAT of a table requires a rebuild. Online operation (LOCK=NONE) is not allowed in the following cases: when adding an AUTO_INCREMENT column, when the table contains FULLTEXT indexes or a hidden FTS_DOC_ID column, or when there are FOREIGN KEY constraints referring to the table, with ON…CASCADE or ON…SET NULL option. The FOREIGN KEY limitations are needed, because MySQL does not acquire meta-data locks on the child or parent tables when executing SQL statements. Theoretically, InnoDB could support operations like ADD COLUMN and DROP COLUMN in-place, by lazily converting the table to a newer format. This would require that the data dictionary keep multiple versions of the table definition. For simplicity, we will copy the entire table, even for DROP COLUMN. The bulk copying of the table will bypass record locking and undo logging. For facilitating online operation, a temporary log will be associated with the clustered index of table. Threads that modify the table will also write the changes to the log. When altering the table, we skip all records that have been marked for deletion. In this way, we can simply discard any undo log records that were not yet purged from the original table. Off-page columns, or BLOBs, are an important consideration. We suspend the purge of delete-marked records if it would free any off-page columns from the old table. This is because the BLOBs can be needed when applying changes from the log. We have special logging for handling the ROLLBACK of an INSERT that inserted new off-page columns. This is because the columns will be freed at rollback.

  Read the article

• Calculated Fields - Idiosyncracies

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

  Read the article

• What's the best way to expose a Model object in a ViewModel?

  - by Angel

  In a WPF MVVM application, I exposed my model object into my viewModel by creating an instance of Model class (which cause dependency) into ViewModel. Instead of creating separate VM properties, I wrap the Model properties inside my ViewModel Property. My model is just an entity framework generated proxy class: public partial class TblProduct { public TblProduct() { this.TblPurchaseDetails = new HashSet<TblPurchaseDetail>(); this.TblPurchaseOrderDetails = new HashSet<TblPurchaseOrderDetail>(); this.TblSalesInvoiceDetails = new HashSet<TblSalesInvoiceDetail>(); this.TblSalesOrderDetails = new HashSet<TblSalesOrderDetail>(); } public int ProductId { get; set; } public string ProductCode { get; set; } public string ProductName { get; set; } public int CategoryId { get; set; } public string Color { get; set; } public Nullable<decimal> PurchaseRate { get; set; } public Nullable<decimal> SalesRate { get; set; } public string ImagePath { get; set; } public bool IsActive { get; set; } public virtual TblCompany TblCompany { get; set; } public virtual TblProductCategory TblProductCategory { get; set; } public virtual TblUser TblUser { get; set; } public virtual ICollection<TblPurchaseDetail> TblPurchaseDetails { get; set; } public virtual ICollection<TblPurchaseOrderDetail> TblPurchaseOrderDetails { get; set; } public virtual ICollection<TblSalesInvoiceDetail> TblSalesInvoiceDetails { get; set; } public virtual ICollection<TblSalesOrderDetail> TblSalesOrderDetails { get; set; } } Here is my ViewModel: public class ProductViewModel : WorkspaceViewModel { #region Constructor public ProductViewModel() { StartApp(); } #endregion //Constructor #region Properties private IProductDataService _dataService; public IProductDataService DataService { get { if (_dataService == null) { if (IsInDesignMode) { _dataService = new ProductDataServiceMock(); } else { _dataService = new ProductDataService(); } } return _dataService; } } //Get and set Model object private TblProduct _product; public TblProduct Product { get { return _product ?? (_product = new TblProduct()); } set { _product = value; } } #region Public Properties public int ProductId { get { return Product.ProductId; } set { if (Product.ProductId == value) { return; } Product.ProductId = value; RaisePropertyChanged("ProductId"); } } public string ProductName { get { return Product.ProductName; } set { if (Product.ProductName == value) { return; } Product.ProductName = value; RaisePropertyChanged(() => ProductName); } } private ObservableCollection<TblProduct> _productRecords; public ObservableCollection<TblProduct> ProductRecords { get { return _productRecords; } set { _productRecords = value; RaisePropertyChanged("ProductRecords"); } } //Selected Product private TblProduct _selectedProduct; public TblProduct SelectedProduct { get { return _selectedProduct; } set { _selectedProduct = value; if (_selectedProduct != null) { this.ProductId = _selectedProduct.ProductId; this.ProductCode = _selectedProduct.ProductCode; } RaisePropertyChanged("SelectedProduct"); } } #endregion //Public Properties #endregion // Properties #region Commands private ICommand _newCommand; public ICommand NewCommand { get { if (_newCommand == null) { _newCommand = new RelayCommand(() => ResetAll()); } return _newCommand; } } private ICommand _saveCommand; public ICommand SaveCommand { get { if (_saveCommand == null) { _saveCommand = new RelayCommand(() => Save()); } return _saveCommand; } } private ICommand _deleteCommand; public ICommand DeleteCommand { get { if (_deleteCommand == null) { _deleteCommand = new RelayCommand(() => Delete()); } return _deleteCommand; } } #endregion //Commands #region Methods private void StartApp() { LoadProductCollection(); } private void LoadProductCollection() { var q = DataService.GetAllProducts(); this.ProductRecords = new ObservableCollection<TblProduct>(q); } private void Save() { if (SelectedOperateMode == OperateModeEnum.OperateMode.New) { //Pass the Model object into Dataservice for save DataService.SaveProduct(this.Product); } else if (SelectedOperateMode == OperateModeEnum.OperateMode.Edit) { //Pass the Model object into Dataservice for Update DataService.UpdateProduct(this.Product); } ResetAll(); LoadProductCollection(); } #endregion //Methods } Here is my Service class: class ProductDataService:IProductDataService { /// <summary> /// Context object of Entity Framework model /// </summary> private MaizeEntities Context { get; set; } public ProductDataService() { Context = new MaizeEntities(); } public IEnumerable<TblProduct> GetAllProducts() { using(var context=new R_MaizeEntities()) { var q = from p in context.TblProducts where p.IsDel == false select p; return new ObservableCollection<TblProduct>(q); } } public void SaveProduct(TblProduct _product) { using(var context=new R_MaizeEntities()) { _product.LastModUserId = GlobalObjects.LoggedUserID; _product.LastModDttm = DateTime.Now; _product.CompanyId = GlobalObjects.CompanyID; context.TblProducts.Add(_product); context.SaveChanges(); } } public void UpdateProduct(TblProduct _product) { using (var context = new R_MaizeEntities()) { context.TblProducts.Attach(_product); context.Entry(_product).State = EntityState.Modified; _product.LastModUserId = GlobalObjects.LoggedUserID; _product.LastModDttm = DateTime.Now; _product.CompanyId = GlobalObjects.CompanyID; context.SaveChanges(); } } public void DeleteProduct(int _productId) { using (var context = new R_MaizeEntities()) { var product = (from c in context.TblProducts where c.ProductId == _productId select c).First(); product.LastModUserId = GlobalObjects.LoggedUserID; product.LastModDttm = DateTime.Now; product.IsDel = true; context.SaveChanges(); } } } I exposed my model object in my viewModel by creating an instance of it using new keyword, also I instantiated my DataService class in VM. I know this will cause a strong dependency. So: What's the best way to expose a Model object in a ViewModel? What's the best way to use DataService in VM?

  Read the article

• Portable class libraries and fetching JSON

  - by Jeff

  After much delay, we finally have the Windows Phone 8 SDK to go along with the Windows 8 Store SDK, or whatever ridiculous name they’re giving it these days. (Seriously… that no one could come up with a suitable replacement for “metro” is disappointing in an otherwise exciting set of product launches.) One of the neat-o things is the potential for code reuse, particularly across Windows 8 and Windows Phone 8 apps. This is accomplished in part with portable class libraries, which allow you to share code between different types of projects. With some other techniques and quasi-hacks, you can share some amount of code, and I saw it mentioned in one of the Build videos that they’re seeing as much as 70% code reuse. Not bad. However, I’ve already hit a super annoying snag. It appears that the HttpClient class, with its idiot-proof async goodness, is not included in the Windows Phone 8 class libraries. Shock, gasp, horror, disappointment, etc. The delay in releasing it already caused dismay among developers, and I’m sure this won’t help. So I started refactoring some code I already had for a Windows 8 Store app (ugh) to accommodate the use of HttpWebRequest instead. I haven’t tried it in a Windows Phone 8 project beyond compiling, but it appears to work. I used this StackOverflow answer as a starting point since it’s been a long time since I used HttpWebRequest, and keep in mind that it has no exception handling. It needs refinement. The goal here is to new up the client, and call a method that returns some deserialized JSON objects from the Intertubes. Adding facilities for headers or cookies is probably a good next step. You need to use NuGet for a Json.NET reference. So here’s the start: using System.Net; using System.Threading.Tasks; using Newtonsoft.Json; using System.IO; namespace MahProject {     public class ServiceClient<T> where T : class     {         public ServiceClient(string url)         {             _url = url;         }         private readonly string _url;         public async Task<T> GetResult()         {             var response = await MakeAsyncRequest(_url);             var result = JsonConvert.DeserializeObject<T>(response);             return result;         }         public static Task<string> MakeAsyncRequest(string url)         {             var request = (HttpWebRequest)WebRequest.Create(url);             request.ContentType = "application/json";             Task<WebResponse> task = Task.Factory.FromAsync(                 request.BeginGetResponse,                 asyncResult => request.EndGetResponse(asyncResult),                 null);             return task.ContinueWith(t => ReadStreamFromResponse(t.Result));         }         private static string ReadStreamFromResponse(WebResponse response)         {             using (var responseStream = response.GetResponseStream())                 using (var reader = new StreamReader(responseStream))                 {                     var content = reader.ReadToEnd();                     return content;                 }         }     } } Calling it in some kind of repository class may look like this, if you wanted to return an array of Park objects (Park model class omitted because it doesn’t matter): public class ParkRepo {     public async Task<Park[]> GetAllParks()     {         var client = new ServiceClient<Park[]>(http://superfoo/endpoint);         return await client.GetResult();     } } And then from inside your WP8 or W8S app (see what I did there?), when you load state or do some kind of UI event handler (making sure the method uses the async keyword): var parkRepo = new ParkRepo(); var results = await parkRepo.GetAllParks(); // bind results to some UI or observable collection or something Hopefully this saves you a little time.

  Read the article

• MVVM- Expose Model object in ViewModel

  - by Angel

  I have a wpf MVVM application , I exposed my model object into my viewModel by creating an instance of Model class (which cause dependency) into ViewModel , and instead of creating seperate VM properties , I wrap the Model properties inside my ViewModel Property. My model is just an entity framework generated proxy classes. Here is my Model class : public partial class TblProduct { public TblProduct() { this.TblPurchaseDetails = new HashSet<TblPurchaseDetail>(); this.TblPurchaseOrderDetails = new HashSet<TblPurchaseOrderDetail>(); this.TblSalesInvoiceDetails = new HashSet<TblSalesInvoiceDetail>(); this.TblSalesOrderDetails = new HashSet<TblSalesOrderDetail>(); } public int ProductId { get; set; } public string ProductCode { get; set; } public string ProductName { get; set; } public int CategoryId { get; set; } public string Color { get; set; } public Nullable<decimal> PurchaseRate { get; set; } public Nullable<decimal> SalesRate { get; set; } public string ImagePath { get; set; } public bool IsActive { get; set; } public virtual TblCompany TblCompany { get; set; } public virtual TblProductCategory TblProductCategory { get; set; } public virtual TblUser TblUser { get; set; } public virtual ICollection<TblPurchaseDetail> TblPurchaseDetails { get; set; } public virtual ICollection<TblPurchaseOrderDetail> TblPurchaseOrderDetails { get; set; } public virtual ICollection<TblSalesInvoiceDetail> TblSalesInvoiceDetails { get; set; } public virtual ICollection<TblSalesOrderDetail> TblSalesOrderDetails { get; set; } } Here is my ViewModel , public class ProductViewModel : WorkspaceViewModel { #region Constructor public ProductViewModel() { StartApp(); } #endregion //Constructor #region Properties private IProductDataService _dataService; public IProductDataService DataService { get { if (_dataService == null) { if (IsInDesignMode) { _dataService = new ProductDataServiceMock(); } else { _dataService = new ProductDataService(); } } return _dataService; } } //Get and set Model object private TblProduct _product; public TblProduct Product { get { return _product ?? (_product = new TblProduct()); } set { _product = value; } } #region Public Properties public int ProductId { get { return Product.ProductId; } set { if (Product.ProductId == value) { return; } Product.ProductId = value; RaisePropertyChanged("ProductId"); } } public string ProductName { get { return Product.ProductName; } set { if (Product.ProductName == value) { return; } Product.ProductName = value; RaisePropertyChanged(() => ProductName); } } private ObservableCollection<TblProduct> _productRecords; public ObservableCollection<TblProduct> ProductRecords { get { return _productRecords; } set { _productRecords = value; RaisePropertyChanged("ProductRecords"); } } //Selected Product private TblProduct _selectedProduct; public TblProduct SelectedProduct { get { return _selectedProduct; } set { _selectedProduct = value; if (_selectedProduct != null) { this.ProductId = _selectedProduct.ProductId; this.ProductCode = _selectedProduct.ProductCode; } RaisePropertyChanged("SelectedProduct"); } } #endregion //Public Properties #endregion // Properties #region Commands private ICommand _newCommand; public ICommand NewCommand { get { if (_newCommand == null) { _newCommand = new RelayCommand(() => ResetAll()); } return _newCommand; } } private ICommand _saveCommand; public ICommand SaveCommand { get { if (_saveCommand == null) { _saveCommand = new RelayCommand(() => Save()); } return _saveCommand; } } private ICommand _deleteCommand; public ICommand DeleteCommand { get { if (_deleteCommand == null) { _deleteCommand = new RelayCommand(() => Delete()); } return _deleteCommand; } } #endregion //Commands #region Methods private void StartApp() { LoadProductCollection(); } private void LoadProductCollection() { var q = DataService.GetAllProducts(); this.ProductRecords = new ObservableCollection<TblProduct>(q); } private void Save() { if (SelectedOperateMode == OperateModeEnum.OperateMode.New) { //Pass the Model object into Dataservice for save DataService.SaveProduct(this.Product); } else if (SelectedOperateMode == OperateModeEnum.OperateMode.Edit) { //Pass the Model object into Dataservice for Update DataService.UpdateProduct(this.Product); } ResetAll(); LoadProductCollection(); } #endregion //Methods } Here is my Service class: class ProductDataService:IProductDataService { /// <summary> /// Context object of Entity Framework model /// </summary> private MaizeEntities Context { get; set; } public ProductDataService() { Context = new MaizeEntities(); } public IEnumerable<TblProduct> GetAllProducts() { using(var context=new R_MaizeEntities()) { var q = from p in context.TblProducts where p.IsDel == false select p; return new ObservableCollection<TblProduct>(q); } } public void SaveProduct(TblProduct _product) { using(var context=new R_MaizeEntities()) { _product.LastModUserId = GlobalObjects.LoggedUserID; _product.LastModDttm = DateTime.Now; _product.CompanyId = GlobalObjects.CompanyID; context.TblProducts.Add(_product); context.SaveChanges(); } } public void UpdateProduct(TblProduct _product) { using (var context = new R_MaizeEntities()) { context.TblProducts.Attach(_product); context.Entry(_product).State = EntityState.Modified; _product.LastModUserId = GlobalObjects.LoggedUserID; _product.LastModDttm = DateTime.Now; _product.CompanyId = GlobalObjects.CompanyID; context.SaveChanges(); } } public void DeleteProduct(int _productId) { using (var context = new R_MaizeEntities()) { var product = (from c in context.TblProducts where c.ProductId == _productId select c).First(); product.LastModUserId = GlobalObjects.LoggedUserID; product.LastModDttm = DateTime.Now; product.IsDel = true; context.SaveChanges(); } } } I exposed my model object in my viewModel by creating an instance of it using new keyword, also I instantiated my DataService class in VM, I know this will cause a strong dependency. So , 1- Whats the best way to expose Model object in ViewModel ? 2- Whats the best way to use DataService in VM ?

  Read the article

• Entity Framework 6: Alpha2 Now Available

  - by ScottGu

  The Entity Framework team recently announced the 2nd alpha release of EF6.   The alpha 2 package is available for download from NuGet. Since this is a pre-release package make sure to select “Include Prereleases” in the NuGet package manager, or execute the following from the package manager console to install it: PM> Install-Package EntityFramework -Pre This week’s alpha release includes a bunch of great improvements in the following areas: Async language support is now available for queries and updates when running on .NET 4.5. Custom conventions now provide the ability to override the default conventions that Code First uses for mapping types, properties, etc. to your database. Multi-tenant migrations allow the same database to be used by multiple contexts with full Code First Migrations support for independently evolving the model backing each context. Using Enumerable.Contains in a LINQ query is now handled much more efficiently by EF and the SQL Server provider resulting greatly improved performance. All features of EF6 (except async) are available on both .NET 4 and .NET 4.5. This includes support for enums and spatial types and the performance improvements that were previously only available when using .NET 4.5. Start-up time for many large models has been dramatically improved thanks to improved view generation performance. Below are some additional details about a few of the improvements above: Async Support .NET 4.5 introduced the Task-Based Asynchronous Pattern that uses the async and await keywords to help make writing asynchronous code easier. EF 6 now supports this pattern. This is great for ASP.NET applications as database calls made through EF can now be processed asynchronously – avoiding any blocking of worker threads. This can increase scalability on the server by allowing more requests to be processed while waiting for the database to respond. The following code shows an MVC controller that is querying a database for a list of location entities:     public class HomeController : Controller     {         LocationContext db = new LocationContext();           public async Task<ActionResult> Index()         {             var locations = await db.Locations.ToListAsync();               return View(locations);         }     } Notice above the call to the new ToListAsync method with the await keyword. When the web server reaches this code it initiates the database request, but rather than blocking while waiting for the results to come back, the thread that is processing the request returns to the thread pool, allowing ASP.NET to process another incoming request with the same thread. In other words, a thread is only consumed when there is actual processing work to do, allowing the web server to handle more concurrent requests with the same resources. A more detailed walkthrough covering async in EF is available with additional information and examples. Also a walkthrough is available showing how to use async in an ASP.NET MVC application. Custom Conventions When working with EF Code First, the default behavior is to map .NET classes to tables using a set of conventions baked into EF. For example, Code First will detect properties that end with “ID” and configure them automatically as primary keys. However, sometimes you cannot or do not want to follow those conventions and would rather provide your own. For example, maybe your primary key properties all end in “Key” instead of “Id”. Custom conventions allow the default conventions to be overridden or new conventions to be added so that Code First can map by convention using whatever rules make sense for your project. The following code demonstrates using custom conventions to set the precision of all decimals to 5. As with other Code First configuration, this code is placed in the OnModelCreating method which is overridden on your derived DbContext class:         protected override void OnModelCreating(DbModelBuilder modelBuilder)         {             modelBuilder.Properties<decimal>()                 .Configure(x => x.HasPrecision(5));           } But what if there are a couple of places where a decimal property should have a different precision? Just as with all the existing Code First conventions, this new convention can be overridden for a particular property simply by explicitly configuring that property using either the fluent API or a data annotation. A more detailed description of custom code first conventions is available here. Community Involvement I blogged a while ago about EF being released under an open source license.  Since then a number of community members have made contributions and these are included in EF6 alpha 2. Two examples of community contributions are: AlirezaHaghshenas contributed a change that increases the startup performance of EF for larger models by improving the performance of view generation. The change means that it is less often necessary to use of pre-generated views. UnaiZorrilla contributed the first community feature to EF: the ability to load all Code First configuration classes in an assembly with a single method call like the following: protected override void OnModelCreating(DbModelBuilder modelBuilder) {        modelBuilder.Configurations            .AddFromAssembly(typeof(LocationContext).Assembly); } This code will find and load all the classes that inherit from EntityTypeConfiguration<T> or ComplexTypeConfiguration<T> in the assembly where LocationContext is defined. This reduces the amount of coupling between the context and Code First configuration classes, and is also a very convenient shortcut for large models. Other upcoming features coming in EF 6 Lots of information about the development of EF6 can be found on the EF CodePlex site, including a roadmap showing the other features that are planned for EF6. One of of the nice upcoming features is connection resiliency, which will automate the process of retying database operations on transient failures common in cloud environments and with databases such as the Windows Azure SQL Database. Another often requested feature that will be included in EF6 is the ability to map stored procedures to query and update operations on entities when using Code First. Summary EF6 is the first open source release of Entity Framework being developed in CodePlex. The alpha 2 preview release of EF6 is now available on NuGet, and contains some really great features for you to try. The EF team are always looking for feedback from developers - especially on the new features such as custom Code First conventions and async support. To provide feedback you can post a comment on the EF6 alpha 2 announcement post, start a discussion or file a bug on the CodePlex site. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Postfix configuration - Uing virtual min but server is bouncing back my mail.

  - by brodiebrodie

  I have no experience in setting up postfix, and thought virtualmin minght do the legwork for me. Appears not. When I try to send mail to the domain (either [email protected] [email protected] or [email protected]) I get the following message returned This is the mail system at host dedq239.localdomain. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]> (expanded from <[email protected]>): User unknown in virtual alias table Final-Recipient: rfc822; [email protected] Original-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; User unknown in virtual alias table How can I diagnose the problem here? It seems that the mail gets to my server but the server fails to locally deliver the message to the correct user. (This is a guess, truthfully I have no idea what is happening). I have checked my virtual alias table and it seems to be set up correctly (I can post if this would be helpful). Can anyone give me a clue as to the next step? Thanks alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no local_recipient_maps = $virtual_mailbox_maps mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination smtpd_sasl_auth_enable = yes soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual My mail log file (the last entry) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 207C6B18158: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: from=<[email protected]>, size=1805, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/error[7238]: 207C6B18158: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=0.64, delays=0.61/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 8DC13B18169: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 8DC13B18169: from=<>, size=3691, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/bounce[7239]: 207C6B18158: sender non-delivery notification: 8DC13B18169 Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: removed Sep 30 15:13:48 dedq239 postfix/smtp[7240]: 8DC13B18169: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.216.55]:25, delay=1.3, delays=0.02/0.01/0.58/0.75, dsn=2.0.0, status=sent (250 2.0.0 OK 1254348828 36si15082901pxi.91) Sep 30 15:13:48 dedq239 postfix/qmgr[7177]: 8DC13B18169: removed Sep 30 15:14:17 dedq239 postfix/smtpd[7233]: disconnect from mail-bw0-f228.google.com[209.85.218.228] etc.aliases file below I have not touched this file - myvirtualdomain is a replacement for my real domain name # Aliases in this file will NOT be expanded in the header from # Mail, but WILL be visible over networks or from /bin/mail. # # >>>>>>>>>> The program "newaliases" must be run after # >> NOTE >> this file is updated for any changes to # >>>>>>>>>> show through to sendmail. # # Basic system aliases -- these MUST be present. mailer-daemon: postmaster postmaster: root # General redirections for pseudo accounts. bin: root daemon: root adm: root lp: root sync: root shutdown: root halt: root mail: root news: root uucp: root operator: root games: root gopher: root ftp: root nobody: root radiusd: root nut: root dbus: root vcsa: root canna: root wnn: root rpm: root nscd: root pcap: root apache: root webalizer: root dovecot: root fax: root quagga: root radvd: root pvm: root amanda: root privoxy: root ident: root named: root xfs: root gdm: root mailnull: root postgres: root sshd: root smmsp: root postfix: root netdump: root ldap: root squid: root ntp: root mysql: root desktop: root rpcuser: root rpc: root nfsnobody: root ingres: root system: root toor: root manager: root dumper: root abuse: root newsadm: news newsadmin: news usenet: news ftpadm: ftp ftpadmin: ftp ftp-adm: ftp ftp-admin: ftp www: webmaster webmaster: root noc: root security: root hostmaster: root info: postmaster marketing: postmaster sales: postmaster support: postmaster # trap decode to catch security attacks decode: root # Person who should get root's mail #root: marc abuse-myvirtualdomain.com: [email protected] My etc/postfix/virtual file is below - again myvirtualdomain is a replacement. I think this file was generated by Virtualmin and I have tried messing around with is with no success... This is the version without my changes. myunixusername@myvirtualdomain .com myunixusername myvirtualdomain .com myvirtualdomain.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

  Read the article

• LXC Container Networking

  - by digitaladdictions

  I just started to experiment with LXC containers. I was able to create a container and start it up but I cannot get dhcp to assign the container an IP address. If I assign a static address the container can ping the host IP but not outside the host IP. The host is CentOS 6.5 and the guest is Ubuntu 14.04LTS. I used the template downloaded by lxc-create -t download -n cn-01 command. If I am trying to get an IP address on the same subnet as the host I don't believe I should need the IP tables rule for masquerading but I added it anyways. Same with IP forwarding. I compiled LXC by hand from the following source https://linuxcontainers.org/downloads/lxc-1.0.4.tar.gz Host Operating System Version #> cat /etc/redhat-release CentOS release 6.5 (Final) #> uname -a Linux localhost.localdomain 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Container Config #> cat /usr/local/var/lib/lxc/cn-01/config # Template used to create this container: /usr/local/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.container.conf(5) # Distribution configuration lxc.include = /usr/local/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /usr/local/var/lib/lxc/cn-01/rootfs lxc.utsname = cn-01 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 LXC default.confu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:f #> cat /usr/local/etc/lxc/default.conf lxc.network.type = veth lxc.network.link = br0 lxc.network.flags = up #> lxc-checkconfig Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-2.6.32-431.20.3.el6.x86_64 --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: /usr/local/bin/lxc-checkconfig: line 103: [: too many arguments enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: /usr/local/bin/lxc-checkconfig: line 118: [: -gt: unary operator expected Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/local/bin/lxc-checkconfig Network Config (HOST) #> cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #> cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes TYPE=Ethernet IPV6INIT=no USERCTL=no BRIDGE=br0 #> cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 #> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 42:7e:43:b3:61:c5 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet 10.60.70.121/24 brd 10.60.70.255 scope global br0 inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 12: vethT6BGL2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether fe:a1:69:af:50:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::fca1:69ff:feaf:5017/64 scope link valid_lft forever preferred_lft forever #> brctl show bridge name bridge id STP enabled interfaces br0 8000.000c291230f2 no eth0 vethT6BGL2 pan0 8000.000000000000 no #> cat /proc/sys/net/ipv4/ip_forward 1 # Generated by iptables-save v1.4.7 on Fri Jul 11 15:11:36 2014 *nat :PREROUTING ACCEPT [34:6287] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Jul 11 15:11:36 2014 Network Config (Container) #> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp #> ip a s 11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 02:69:fb:42:ee:d7 brd ff:ff:ff:ff:ff:ff inet6 fe80::69:fbff:fe42:eed7/64 scope link valid_lft forever preferred_lft forever 13: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever

  Read the article

• Failed to Install Xdebug

  - by burnt1ce

  've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. I've used both "zend_extention" and "zend_extention_ts" to specify the path of the xdebug dll. I ensured that my apache server restarted and used the latest change of my php.ini by executing "httpd -k restart". Can anyone provide any suggestions in getting xdebug to show up? Here are the contents of my php.ini file. [PHP] ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; PHP's initialization file, generally called php.ini, is responsible for ; configuring many of the aspects of PHP's behavior. ; PHP attempts to find and load this configuration from a number of locations. ; The following is a summary of its search order: ; 1. SAPI module specific location. ; 2. The PHPRC environment variable. (As of PHP 5.2.0) ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) ; 4. Current working directory (except CLI) ; 5. The web server's directory (for SAPI modules), or directory of PHP ; (otherwise in Windows) ; 6. The directory from the --with-config-file-path compile time option, or the ; Windows directory (C:\windows or C:\winnt) ; See the PHP docs for more specific information. ; http://php.net/configuration.file ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; Directives following the section heading [PATH=/www/mysite] only ; apply to PHP files in the /www/mysite directory. Directives ; following the section heading [HOST=www.example.com] only apply to ; PHP files served from www.example.com. Directives set in these ; special sections cannot be overridden by user-defined INI files or ; at runtime. Currently, [PATH=] and [HOST=] sections only work under ; CGI/FastCGI. ; http://php.net/ini.sections ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; Directives are variables used to configure PHP or PHP extensions. ; There is no name validation. If PHP can't find an expected ; directive because it is not set or is mistyped, a default value will be used. ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a ; previously set variable or directive (e.g. ${foo}) ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; ^ bitwise XOR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; foo = ; sets foo to an empty string ; foo = None ; sets foo to an empty string ; foo = "None" ; sets foo to the string 'None' ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; PHP comes packaged with two INI files. One that is recommended to be used ; in production environments and one that is recommended to be used in ; development environments. ; php.ini-production contains settings which hold security, performance and ; best practices at its core. But please be aware, these settings may break ; compatibility with older or less security conscience applications. We ; recommending using the production ini in production and testing environments. ; php.ini-development is very similar to its production variant, except it's ; much more verbose when it comes to errors. We recommending using the ; development version only in development environments as errors shown to ; application users can inadvertently leak otherwise secure information. ;;;;;;;;;;;;;;;;;;; ; Quick Reference ; ;;;;;;;;;;;;;;;;;;; ; The following are all the settings which are different in either the production ; or development versions of the INIs with respect to PHP's default behavior. ; Please see the actual settings later in the document for more details as to why ; we recommend these changes in PHP's behavior. ; allow_call_time_pass_reference ; Default Value: On ; Development Value: Off ; Production Value: Off ; display_errors ; Default Value: On ; Development Value: On ; Production Value: Off ; display_startup_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; error_reporting ; Default Value: E_ALL & ~E_NOTICE ; Development Value: E_ALL | E_STRICT ; Production Value: E_ALL & ~E_DEPRECATED ; html_errors ; Default Value: On ; Development Value: On ; Production value: Off ; log_errors ; Default Value: Off ; Development Value: On ; Production Value: On ; magic_quotes_gpc ; Default Value: On ; Development Value: Off ; Production Value: Off ; max_input_time ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; output_buffering ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; register_argc_argv ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_long_arrays ; Default Value: On ; Development Value: Off ; Production Value: Off ; request_order ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; session.bug_compat_42 ; Default Value: On ; Development Value: On ; Production Value: Off ; session.bug_compat_warn ; Default Value: On ; Development Value: On ; Production Value: Off ; session.gc_divisor ; Default Value: 100 ; Development Value: 1000 ; Production Value: 1000 ; session.hash_bits_per_character ; Default Value: 4 ; Development Value: 5 ; Production Value: 5 ; short_open_tag ; Default Value: On ; Development Value: Off ; Production Value: Off ; track_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; url_rewriter.tags ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; variables_order ; Default Value: "EGPCS" ; Development Value: "GPCS" ; Production Value: "GPCS" ;;;;;;;;;;;;;;;;;;;; ; php.ini Options ; ;;;;;;;;;;;;;;;;;;;; ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" ;user_ini.filename = ".user.ini" ; To disable this feature set this option to empty value ;user_ini.filename = ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) ;user_ini.cache_ttl = 300 ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. ; http://php.net/engine engine = On ; This directive determines whether or not PHP will recognize code between ; <? and ?> tags as PHP source which should be processed as such. It's been ; recommended for several years that you not use the short tag "short cut" and ; instead to use the full <?php and ?> tag combination. With the wide spread use ; of XML and use of these tags by other languages, the server can become easily ; confused and end up parsing the wrong code in the wrong context. But because ; this short cut has been a feature for such a long time, it's currently still ; supported for backwards compatibility, but we recommend you don't use them. ; Default Value: On ; Development Value: Off ; Production Value: Off ; http://php.net/short-open-tag short_open_tag = Off ; Allow ASP-style <% %> tags. ; http://php.net/asp-tags asp_tags = Off ; The number of significant digits displayed in floating point numbers. ; http://php.net/precision precision = 14 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers) ; http://php.net/y2k-compliance y2k_compliance = On ; Output buffering is a mechanism for controlling how much output data ; (excluding headers and cookies) PHP should keep internally before pushing that ; data to the client. If your application's output exceeds this setting, PHP ; will send that data in chunks of roughly the size you specify. ; Turning on this setting and managing its maximum buffer size can yield some ; interesting side-effects depending on your application and web server. ; You may be able to send headers and cookies after you've already sent output ; through print or echo. You also may see performance benefits if your server is ; emitting less packets due to buffered output versus PHP streaming the output ; as it gets it. On production servers, 4096 bytes is a good setting for performance ; reasons. ; Note: Output buffering can also be controlled via Output Buffering Control ; functions. ; Possible Values: ; On = Enabled and buffer is unlimited. (Use with caution) ; Off = Disabled ; Integer = Enables the buffer and sets its maximum size in bytes. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; http://php.net/output-buffering output_buffering = Off ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ; http://php.net/output-handler ;output_handler = ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. ; http://php.net/zlib.output-compression zlib.output_compression = Off ; http://php.net/zlib.output-compression-level ;zlib.output_compression_level = -1 ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ; http://php.net/zlib.output-handler ;zlib.output_handler = ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. ; http://php.net/implicit-flush ; Note: This directive is hardcoded to On for the CLI SAPI implicit_flush = Off ; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. A warning appears if the specified function is ; not defined, or if the function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func = ; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100 ; This directive allows you to enable and disable warnings which PHP will issue ; if you pass a value by reference at function call time. Passing values by ; reference at function call time is a deprecated feature which will be removed ; from PHP at some point in the near future. The acceptable method for passing a ; value by reference to a function is by declaring the reference in the functions ; definition, not at call time. This directive does not disable this feature, it ; only determines whether PHP will warn you about it or not. These warnings ; should enabled in development environments only. ; Default Value: On (Suppress warnings) ; Development Value: Off (Issue warnings) ; Production Value: Off (Issue warnings) ; http://php.net/allow-call-time-pass-reference allow_call_time_pass_reference = On ; Safe Mode ; http://php.net/safe-mode safe_mode = Off ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. ; http://php.net/safe-mode-gid safe_mode_gid = Off ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) ; http://php.net/safe-mode-include-dir safe_mode_include_dir = ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. ; http://php.net/safe-mode-exec-dir safe_mode_exec_dir = ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! ; http://php.net/safe-mode-allowed-env-vars safe_mode_allowed_env_vars = PHP_ ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. ; http://php.net/safe-mode-protected-env-vars safe_mode_protected_env_vars = LD_LIBRARY_PATH ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/open-basedir ;open_basedir = ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-functions disable_functions = ; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-classes disable_classes = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ; http://php.net/syntax-highlighting ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000 ; If enabled, the request will be allowed to complete even if the user aborts ; the request. Consider enabling it if executing long requests, which may end up ; being interrupted by the user or a browser timing out. PHP's default behavior ; is to disable this feature. ; http://php.net/ignore-user-abort ;ignore_user_abort = On ; Determines the size of the realpath cache to be used by PHP. This value should ; be increased on systems where PHP opens many files to reflect the quantity of ; the file operations performed. ; http://php.net/realpath-cache-size ;realpath_cache_size = 16k ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://php.net/realpath-cache-ttl ;realpath_cache_ttl = 120 ;;;;;;;;;;;;;;;;; ; Miscellaneous ; ;;;;;;;;;;;;;;;;; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. ; http://php.net/expose-php expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; ; Maximum execution time of each script, in seconds ; http://php.net/max-execution-time ; Note: This directive is hardcoded to 0 for the CLI SAPI max_execution_time = 60 ; Maximum amount of time each script may spend parsing request data. It's a good ; idea to limit this time on productions servers in order to eliminate unexpectedly ; long running scripts. ; Note: This directive is hardcoded to -1 for the CLI SAPI ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; http://php.net/max-input-time max_input_time = 60 ; Maximum input variable nesting level ; http://php.net/max-input-nesting-level ;max_input_nesting_level = 64 ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 128M ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; This directive informs PHP of which errors, warnings and notices you would like ; it to take action for. The recommended way of setting values for this ; directive is through the use of the error level constants and bitwise ; operators. The error level constants are below here for convenience as well as ; some common settings and their meanings. ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT ; those related to E_NOTICE and E_STRICT, which together cover best practices and ; recommended coding standards in PHP. For performance reasons, this is the ; recommend error reporting setting. Your production server shouldn't be wasting ; resources complaining about best practices and coding standards. That's what ; development servers and development settings are for. ; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This ; means it pretty much reports everything which is exactly what you want during ; development and early testing. ; ; Error Level Constants: ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; E_DEPRECATED - warn about code that will not work in future versions ; of PHP ; E_USER_DEPRECATED - user-generated deprecation warnings ; ; Common Values: ; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) ; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) ; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) ; Default Value: E_ALL & ~E_NOTICE ; Development Value: E_ALL | E_STRICT ; Production Value: E_ALL & ~E_DEPRECATED ; http://php.net/error-reporting error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED ; This directive controls whether or not and where PHP will output errors, ; notices and warnings too. Error output is very useful during development, but ; it could be very dangerous in production environments. Depending on the code ; which is triggering the error, sensitive information could potentially leak ; out of your application such as database usernames and passwords or worse. ; It's recommended that errors be logged on production servers rather than ; having the errors sent to STDOUT. ; Possible Values: ; Off = Do not display any errors ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) ; On or stdout = Display errors to STDOUT ; Default Value: On ; Development Value: On ; Production Value: Off ; http://php.net/display-errors display_errors = On ; The display of errors which occur during PHP's startup sequence are handled ; separately from display_errors. PHP's default behavior is to suppress those ; errors from clients. Turning the display of startup errors on can be useful in ; debugging configuration problems. But, it's strongly recommended that you ; leave this setting off on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/display-startup-errors display_startup_errors = On ; Besides displaying errors, PHP can also log errors to locations such as a ; server-specific log, STDERR, or a location specified by the error_log ; directive found below. While errors should not be displayed on productions ; servers they should still be monitored and logging is a great way to do that. ; Default Value: Off ; Development Value: On ; Production Value: On ; http://php.net/log-errors log_errors = Off ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. ; http://php.net/log-errors-max-len log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same ; line unless ignore_repeated_source is set true. ; http://php.net/ignore-repeated-errors ignore_repeated_errors = Off ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; source lines. ; http://php.net/ignore-repeated-source ignore_repeated_source = Off ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list ; http://php.net/report-memleaks report_memleaks = On ; This setting is on by default. ;report_zend_debug = 0 ; Store the last error/warning message in $php_errormsg (boolean). Setting this value ; to On can assist in debugging and is appropriate for development servers. It should ; however be disabled on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/track-errors track_errors = Off ; Turn off normal error reporting and emit XML-RPC error XML ; http://php.net/xmlrpc-errors ;xmlrpc_errors = 0 ; An XML-RPC faultCode ;xmlrpc_error_number = 0 ; When PHP displays or logs an error, it has the capability of inserting html ; links to documentation related to that error. This directive controls whether ; those HTML links appear in error messages or not. For performance and security ; reasons, it's recommended you disable this on production servers. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: On ; Development Value: On ; Production value: Off ; http://php.net/html-errors html_errors = On ; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://php.net/docs ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. PHP's default behavior is to leave these settings empty. ; Note: Never use this feature for production boxes. ; http://php.net/docref-root ; Examples ;docref_root = "/phpmanual/" ; http://php.net/docref-ext ;docref_ext = .html ; String to output before an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-prepend-string ; Example: ;error_prepend_string = "<font color=#ff0000>" ; String to output after an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-append-string ; Example: ;error_append_string = "</font>" ; Log errors to specified file. PHP's default behavior is to leave this value ; empty. ; http://php.net/error-log ; Example: ;error_log = php_errors.log ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ;error_log = "C:\xampp\apache\logs\php_error.log" ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; Note - track_vars is ALWAYS enabled ; The separator used in PHP generated URLs to separate arguments. ; PHP's default setting is "&". ; http://php.net/arg-separator.output ; Example: arg_separator.output = "&amp;" ; List of separator(s) used by PHP to parse input URLs into variables. ; PHP's default setting is "&

  Read the article

• asp.net mvc jquery + tabs +jqgrid +jqgrid loaded only for first tab

  - by niao

  Greetings, I have a problem using jqgrid and jquery tab (I am coding in asp.net mvc) I have two tabs. Each tabs should contains jqgrid with different data. I specify tabs as follows: <script type="text/javascript"> $(document).ready(function() { $("#tabs").tabs(); getContentTab (1); }); function getContentTab(index) { var url='<%= Url.Content("~/Admin/GetWorkspaces") %>/' + index; var targetDiv = "#tabs-" + index; var ajaxLoading = "<img id='ajax-loader' src='<%= Url.Content("~/Content") %>/ajax-loader.gif' align='left' height='28' width='28'>"; $(targetDiv).html("<p>" + ajaxLoading + " Loading...</p>"); $.get(url,null, function(result) { $(targetDiv).html(result); }); } </script> <div id="tabs"> <ul> <li><a href="#tabs-1" onclick="getContentTab(1);">tab1</a></li> <li><a href="#tabs-2" onclick="getContentTab(2);">tab2</a></li> </ul> <div id="tabs-1"> </div> <div id="tabs-2"> </div> </div> As seen above GetWorkspaces action gets my tabs: public ActionResult GetWorkspaces(int id) { string viewName = string.Empty; switch (id) { case 1: viewName = "MarketplaceOfferView"; break; case 2: viewName = "MyMessagesView"; break; } return PartialView(viewName); } each of view is a partial view. In these partial views I have jqgrids specified as follows: <script type="text/javascript"> jQuery("#list").ready(function() { jQuery("#list").jqGrid({ url: '/Admin/GetGridData/', datatype: 'json', mtype: 'GET', colNames: ['Klient', 'Zapytanie', 'Atrakcyjnosc', 'Cena', 'Data poczatkowa', 'Data koncowa', 'Branza', 'Lokalizacja' ], colModel: [ { name: 'CompanyName', index: 'CompanyName', width: 150, align: 'left' }, { name: 'Content', index: 'ContactName', width: 300, align: 'left' }, { name: 'Rating', index: 'Address', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'PostalCode', width: 100, align: 'left' } ], pager: jQuery('#pager'), rowNum: 100, rowList: [5, 10, 20, 50], sortname: 'Operator.FullName', sortorder: "asc", viewrecords: true, imgpath: '/scripts/themes/steel/images', caption: 'Historia moich wiadomosci', height:400 }); // .navGrid(pager, { edit: true, add: false, del: false, refresh: true, search: false }); }); </script> Historia moich wiadomosci <table id="list" class="scroll" cellpadding="0" cellspacing="0" width="100%"> </table> <div id="pager" class="scroll" style="text-align: center;"> </div> For second view I have an action: /Admin/GetGridDataForTab2/ THe problem is that I see a jqgrid only when I click on first tab. When I click on second tab the grid is not displayed and /Admin/GetGridData/ is not executed. Does anybody have an idea what is wrong?

  Read the article

• Jquery datepicker popup not closing on select date in IE8

  - by Notorious2tall

  I've got a web form with a start date field. I've tied a jquery datepicker to the txt field. Now when I choose a date in FF, the selected date is populated in the text box and the calendar popup closes. However when I do the same thing in IE8, the selected date is populated in the text box but the popup remains open. I've also noticed that a script error is generated as soon as I select a date in the popup calendar. I'm using jquery 1.3.2, jquery-ui 1.7.2, and .NET 3.5. Here's an example of my code: <script type="text/javascript"> $(document).ready(function() { $("#<%=txtStartDate.ClientID%>").datepicker({ changeMonth: true, changeYear: true, showButtonPanel: true, showOn: 'button', buttonImage: '/_layouts/images/CALENDAR.GIF', buttonImageOnly: true }); }); </script> <div id="stylized"> <asp:ValidationSummary ID="vs" runat="server" CssClass="messages-error" HeaderText=" Action required before the form can be submitted." ForeColor="" ValidationGroup="sh" /> <div class="formrow"> <div class="ms-formlabel formlabel"> <asp:Label ID="lblStartDate" runat="server" CssClass="ms-standardheader" AssociatedControlID="txtStartDate">Start Date:</asp:Label> </div> <div class="ms-formbody formfield"> <asp:RequiredFieldValidator ID="reqStartDate" runat="server" ControlToValidate="txtStartDate" ErrorMessage="Start Date is a required field." Text="*" Display="Dynamic" ValidationGroup="sh"></asp:RequiredFieldValidator> <asp:CompareValidator ID="cvStartDate" runat="server" ControlToValidate="txtStartDate" ErrorMessage="Date must be in the format MM/DD/YYYY" Text="*" Display="Dynamic" ValidationGroup="sh" Operator="DataTypeCheck" Type="Date"></asp:CompareValidator> <asp:TextBox ID="txtStartDate" runat="server"></asp:TextBox> <span class="formMessage">ex. MM/DD/YYYY</span> </div> </div> <div id="buttonrow"> <asp:Button ID="btnSubmit" runat="server" Text="Submit" CssClass="ms-ButtonHeightWidth" OnClick="Submit_Click" ValidationGroup="sh" /> <asp:Button ID="btnCancel" runat="server" Text="Cancel" CssClass="ms-ButtonHeightWidth" OnClick="Cancel_Click" CausesValidation="false" /> </div> </div> Here's the script error I get in IE when I select the date: 'length' is null or not an object WebResource.axd Here's the code where the error is being thrown from: function ValidatorOnChange(event) { if (!event) { event = window.event; } Page_InvalidControlToBeFocused = null; var targetedControl; if ((typeof(event.srcElement) != "undefined") && (event.srcElement != null)) { targetedControl = event.srcElement; } else { targetedControl = event.target; } var vals; if (typeof(targetedControl.Validators) != "undefined") { vals = targetedControl.Validators; } else { if (targetedControl.tagName.toLowerCase() == "label") { targetedControl = document.getElementById(targetedControl.htmlFor); vals = targetedControl.Validators; } } var i; for (i = 0; i < vals.length; i++) { ValidatorValidate(vals[i], null, event); } ValidatorUpdateIsValid(); } It happens on the .length in the for loop at the end. Vals is null and isn't found in the previous if/else. I've stepped through the javascript and if (typeof(targetedControl.Validators) != "undefined") returns false and then if (targetedControl.tagName.toLowerCase() == "label") returns false too. Thus the length is null or not an object error. Now I'm not sure if the datepicker popup not closing in IE and the script error in the WebResources.axd file are related errors, but I'm leaning that way. Can anyone tell me why the popup isn't closing?

  Read the article

• calculater by using reverse polish notation and using a stack

  - by programmer

  hello everyone I have a segmentation fault ,can you help please? if i have this operater "3 5 +" that mean 3+5 and like "9 8 * 5 + 4 + sin", "sin(((9*8)+5)+4)" so my idea is check if the first and second are numbers and push theem in the stack then when i have operator i pop the numbers and make the calculation then push the answer again. ` typedef struct st_node { float val; struct st_node *next; } t_node; typedef t_node t_stack; // a function to allocate memory for a stack and returns the stack t_stack* fnewCell() { t_stack* ret; ret = (t_stack*) malloc(sizeof(t_stack)); return ret; } // a function to allocate memory for a stack, fills it with value v and pointer n , and returns the stack t_stack* fnewCellFilled(float v, t_stack* n) { t_stack* ret; ret = fnewCell(); ret->val = v; ret->next =n; return ret; } //function to initialize stack void initstack(t_stack** stack) { fnewCellFilled(0,NULL); } // add new cell void insrtHead(t_stack** head,float val) { *head = fnewCellFilled(val,*head); } //function to push the value v into the stack s void push(t_stack **s, float val) { insrtHead(s,val); } //function to pop a value from the stack and returns it int pop(t_stack **s) { t_stack* tmp; int ret; tmp = (*s)->next; ret = (*s)->val; free(*s); (*s) = tmp; return ret; } int isempty (t_stack *t) { return t == NULL; } //function to transfer a string(str) to int (value) //returns -1 when success , i otherwise int str2int(char *str,int *value) { int i; *value = 0; int sign=(str[0]=='-' ? -1 : 1); for(i=(str[0]=='-' ? 1 : 0);str[i]!=0;i++) { if(!(str[i]>=48 && str[i]<=57)) // Ascii char 0 to 9 return i; *value= *value*10+(str[i]-48); } *value = *value * sign; return -1; } //a function that takes a string, transfer it into integer and make operation using a stack void function(t_stack *stack, char *str) { char x[10]=" "; int y,j,i=0,z; printf("++\n"); if(str[i] != '\0') { strcpy(x, strtok(str, " ")); z= str2int(x, &y); if(z == -1) { push(&stack,y); i=i+2; } } while(str[i] != '\0') { strcpy(x, strtok(NULL, " ")); z= str2int(x, &y); if(z == -1) { printf("yes %d",y); push(&stack,y); i=i+2; } else { y=pop(&stack); j=pop(&stack); if(x[0] == '+' ) push(&stack,y+j); else if (x[0] == '-' ) push(&stack,j-y); else if(x[0] == '*' ) push(&stack,j*y); else if(x[0] == '/') push (&stack ,j/y); } } } int main() { t_stack *s; initstack(&s); char *str="3 5 +"; function(s,str); return 0; } `

  Read the article

• VFP Unit Matrix Multiply problem on the iPhone

  - by Ian Copland

  Hi. I'm trying to write a Matrix3x3 multiply using the Vector Floating Point on the iPhone, however i'm encountering some problems. This is my first attempt at writing any ARM assembly, so it could be a faily simple solution that i'm not seeing. I've currently got a small application running using a maths library that i've written. I'm investigating into the benifits using the Vector Floating Point Unit would provide so i've taken my matrix multiply and converted it to asm. Previously the application would run without a problem, however now my objects will all randomly disappear. This seems to be caused by the results from my matrix multiply becoming NAN at some point. Heres the code IMatrix3x3 operator*(IMatrix3x3 & _A, IMatrix3x3 & _B) { IMatrix3x3 C; //C++ code for the simulator #if TARGET_IPHONE_SIMULATOR == true C.A0 = _A.A0 * _B.A0 + _A.A1 * _B.B0 + _A.A2 * _B.C0; C.A1 = _A.A0 * _B.A1 + _A.A1 * _B.B1 + _A.A2 * _B.C1; C.A2 = _A.A0 * _B.A2 + _A.A1 * _B.B2 + _A.A2 * _B.C2; C.B0 = _A.B0 * _B.A0 + _A.B1 * _B.B0 + _A.B2 * _B.C0; C.B1 = _A.B0 * _B.A1 + _A.B1 * _B.B1 + _A.B2 * _B.C1; C.B2 = _A.B0 * _B.A2 + _A.B1 * _B.B2 + _A.B2 * _B.C2; C.C0 = _A.C0 * _B.A0 + _A.C1 * _B.B0 + _A.C2 * _B.C0; C.C1 = _A.C0 * _B.A1 + _A.C1 * _B.B1 + _A.C2 * _B.C1; C.C2 = _A.C0 * _B.A2 + _A.C1 * _B.B2 + _A.C2 * _B.C2; //VPU ARM asm for the device #else //create a pointer to the Matrices IMatrix3x3 * pA = &_A; IMatrix3x3 * pB = &_B; IMatrix3x3 * pC = &C; //asm code asm volatile( //turn on a vector depth of 3 "fmrx r0, fpscr \n\t" "bic r0, r0, #0x00370000 \n\t" "orr r0, r0, #0x00020000 \n\t" "fmxr fpscr, r0 \n\t" //load matrix B into the vector bank "fldmias %1, {s8-s16} \n\t" //load the first row of A into the scalar bank "fldmias %0!, {s0-s2} \n\t" //calulate C.A0, C.A1 and C.A2 "fmuls s17, s8, s0 \n\t" "fmacs s17, s11, s1 \n\t" "fmacs s17, s14, s2 \n\t" //save this into the output "fstmias %2!, {s17-s19} \n\t" //load the second row of A into the scalar bank "fldmias %0!, {s0-s2} \n\t" //calulate C.B0, C.B1 and C.B2 "fmuls s17, s8, s0 \n\t" "fmacs s17, s11, s1 \n\t" "fmacs s17, s14, s2 \n\t" //save this into the output "fstmias %2!, {s17-s19} \n\t" //load the third row of A into the scalar bank "fldmias %0!, {s0-s2} \n\t" //calulate C.C0, C.C1 and C.C2 "fmuls s17, s8, s0 \n\t" "fmacs s17, s11, s1 \n\t" "fmacs s17, s14, s2 \n\t" //save this into the output "fstmias %2!, {s17-s19} \n\t" //set the vector depth back to 1 "fmrx r0, fpscr \n\t" "bic r0, r0, #0x00370000 \n\t" "orr r0, r0, #0x00000000 \n\t" "fmxr fpscr, r0 \n\t" //pass the inputs and set the clobber list : "+r"(pA), "+r"(pB), "+r" (pC) : :"cc", "memory","s0", "s1", "s2", "s8", "s9", "s10", "s11", "s12", "s13", "s14", "s15", "s16", "s17", "s18", "s19" ); #endif return C; } As far as i can see that makes sence. While debugging i've managed to notice that if i were to say _A = C prior to the return and after the ASM, _A will not necessarily be equal to C which has only increased my confusion. I had thought it was possibly due to the pointers I'm giving to the VFPU being incrimented by lines such as "fldmias %0!, {s0-s2} \n\t" however my understanding of asm is not good enough to properly understand the problem, nor to see an alternative approach to that line of code. Anyway, I was hoping someone with a greater understanding than me would be able to see a solution, and any help would be greatly appreciated, thank you :-)

  Read the article

• Problem simulating HTTP POST using HttpClient

  - by user560904

  I am trying to programatically send a HTTP Post request using HttpClient to http://ojp.nationalrail.co.uk/en/s/planjourney/query but it is not liking the request I send it. I copied the headers and body from what Chrome browser sends so it is identical but it doesn't like what I send as the HTML mentions there's an error. <div class="padding"> <h1 class="sifr"><strong>Sorry</strong>, something went wrong</h1> <div class="error-message"> <div class="error-message-padding"> <h2>There is a problem with the page you are trying to access.</h2> <p>It is possible that it was either moved, it doesn't exist or we are experiencing some technical difficulties.</p> <p>We are sorry for the inconvenience.</p> </div> </div> </div> Here is my Java program which uses HttpClient: package com.tixsnif; import org.apache.http.*; import org.apache.http.client.HttpClient; import org.apache.http.client.entity.UrlEncodedFormEntity; import org.apache.http.client.methods.HttpPost; import org.apache.http.impl.client.DefaultHttpClient; import org.apache.http.message.BasicNameValuePair; import org.apache.http.protocol.HTTP; import java.io.*; import java.util.*; import java.util.zip.GZIPInputStream; public class WebScrapingTesting { public static void main(String[] args) throws Exception { String target = "http://ojp.nationalrail.co.uk/en/s/planjourney/query"; HttpClient client = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(target); BasicNameValuePair[] params = { new BasicNameValuePair("jpState", "single"), new BasicNameValuePair("commandName", "journeyPlannerCommand"), new BasicNameValuePair("from.searchTerm", "Basingstoke"), new BasicNameValuePair("to.searchTerm", "Reading"), new BasicNameValuePair("timeOfOutwardJourney.arrivalOrDeparture", "DEPART"), new BasicNameValuePair("timeOfOutwardJourney.monthDay", "Today"), new BasicNameValuePair("timeOfOutwardJourney.hour", "10"), new BasicNameValuePair("timeOfOutwardJourney.minute", "15"), new BasicNameValuePair("timeOfReturnJourney.arrivalOrDeparture", "DEPART"), new BasicNameValuePair("timeOfReturnJourney.monthDay", "Today"), new BasicNameValuePair("timeOfReturnJourney.hour", "18"), new BasicNameValuePair("timeOfReturnJourney.minute", "15"), new BasicNameValuePair("_includeOvertakenTrains", "on"), new BasicNameValuePair("viaMode", "VIA"), new BasicNameValuePair("via.searchTerm", "Station name / code"), new BasicNameValuePair("offSetOption", "0"), new BasicNameValuePair("_reduceTransfers", "on"), new BasicNameValuePair("operatorMode", "SHOW"), new BasicNameValuePair("operator.code", ""), new BasicNameValuePair("_lookForSleeper", "on"), new BasicNameValuePair("_directTrains", "on")}; httpPost.setHeader("Host", "ojp.nationalrail.co.uk"); httpPost.setHeader("User-Agent", "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en-US) AppleWebKit/534.10 (KHTML, like Gecko) Chrome/8.0.552.231 Safari/534.10"); httpPost.setHeader("Accept-Encoding", "gzip,deflate,sdch"); httpPost.setHeader("Accept", "text/html,application/xhtml+xml,application/xml;q=0.9,**/*//*;q=0.8"); httpPost.setHeader("Accept-Language", "en-us,en;q=0.8"); httpPost.setHeader("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); httpPost.setHeader("Origin", "http://www.nationalrail.co.uk/"); httpPost.setHeader("Referer", "http://www.nationalrail.co.uk/"); httpPost.setHeader("Content-Type", "application/x-www-form-urlencoded"); httpPost.setHeader("Cookie", "JSESSIONID=B2A3419B79C5D999CA4806B459675CCD.app201; Path=/"); UrlEncodedFormEntity urlEncodedFormEntity = new UrlEncodedFormEntity(Arrays.asList(params)); urlEncodedFormEntity.setContentEncoding(HTTP.UTF_8); httpPost.setEntity(urlEncodedFormEntity); HttpResponse response = client.execute(httpPost); InputStream input = response.getEntity().getContent(); GZIPInputStream gzip = new GZIPInputStream(input); InputStreamReader isr = new InputStreamReader(gzip); BufferedReader br = new BufferedReader(isr); String line = null; while((line = br.readLine()) != null) { System.out.printf("\n%s", line); } client.getConnectionManager().shutdown(); } } I keep the JSESSION ID updated if it expires but there seems to be another problem that I cannot see. Am I missing something rather obvious? He

  Read the article

• Does boost::asio makes excessive small heap allocations or am I wrong?

  - by Poni

  #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { if (!error) { data_[bytes_transferred] = '\0'; if(NULL != strstr(data_, "quit")) { this->socket().shutdown(boost::asio::ip::tcp::socket::shutdown_both); this->socket().close(); // how to make this dispatch "handle_read()" with a "disconnected" flag? } else { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { // } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } While experimenting with boost::asio I've noticed that within the calls to async_write()/async_read_some() there is a usage of the C++ "new" keyword. Also, when stressing this echo server with a client (1 connection) that sends for example 100,000 times some data, the memory usage of this program is getting higher and higher. What's going on? Will it allocate memory for every call? Or am I wrong? Asking because it doesn't seem right that a server app will allocate, anything. Can I handle it, say with a memory pool? Another side-question: See the "this-socket().close();" ? I want it, as the comment right to it says, to dispatch that same function one last time, with a disconnection error. Need that to do some clean-up. How do I do that? Thank you all gurus (:

  Read the article

• Overflow exception while performing parallel factorization using the .NET Task Parallel Library (TPL

  - by Aviad P.

  Hello, I'm trying to write a not so smart factorization program and trying to do it in parallel using TPL. However, after about 15 minutes of running on a core 2 duo machine, I am getting an aggregate exception with an overflow exception inside it. All the entries in the stack trace are part of the .NET framework, the overflow does not come from my code. Any help would be appreciated in figuring out why this happens. Here's the commented code, hopefully it's simple enough to understand: class Program { static List<Tuple<BigInteger, int>> factors = new List<Tuple<BigInteger, int>>(); static void Main(string[] args) { BigInteger theNumber = BigInteger.Parse( "653872562986528347561038675107510176501827650178351386656875178" + "568165317809518359617865178659815012571026531984659218451608845" + "719856107834513527"); Stopwatch sw = new Stopwatch(); bool isComposite = false; sw.Start(); do { /* Print out the number we are currently working on. */ Console.WriteLine(theNumber); /* Find a factor, stop when at least one is found (using the Any operator). */ isComposite = Range(theNumber) .AsParallel() .Any(x => CheckAndStoreFactor(theNumber, x)); /* Of the factors found, take the one with the lowest base. */ var factor = factors.OrderBy(x => x.Item1).First(); Console.WriteLine(factor); /* Divide the number by the factor. */ theNumber = BigInteger.Divide( theNumber, BigInteger.Pow(factor.Item1, factor.Item2)); /* Clear the discovered factors cache, and keep looking. */ factors.Clear(); } while (isComposite); sw.Stop(); Console.WriteLine(isComposite + " " + sw.Elapsed); } static IEnumerable<BigInteger> Range(BigInteger squareOfTarget) { BigInteger two = BigInteger.Parse("2"); BigInteger element = BigInteger.Parse("3"); while (element * element < squareOfTarget) { yield return element; element = BigInteger.Add(element, two); } } static bool CheckAndStoreFactor(BigInteger candidate, BigInteger factor) { BigInteger remainder, dividend = candidate; int exponent = 0; do { dividend = BigInteger.DivRem(dividend, factor, out remainder); if (remainder.IsZero) { exponent++; } } while (remainder.IsZero); if (exponent > 0) { lock (factors) { factors.Add(Tuple.Create(factor, exponent)); } } return exponent > 0; } } Here's the exception thrown: Unhandled Exception: System.AggregateException: One or more errors occurred. --- > System.OverflowException: Arithmetic operation resulted in an overflow. at System.Linq.Parallel.PartitionedDataSource`1.ContiguousChunkLazyEnumerator.MoveNext(T& currentElement, Int32& currentKey) at System.Linq.Parallel.AnyAllSearchOperator`1.AnyAllSearchOperatorEnumerator`1.MoveNext(Boolean& currentElement, Int32& currentKey) at System.Linq.Parallel.StopAndGoSpoolingTask`2.SpoolingWork() at System.Linq.Parallel.SpoolingTaskBase.Work() at System.Linq.Parallel.QueryTask.BaseWork(Object unused) at System.Linq.Parallel.QueryTask.<.cctor>b__0(Object o) at System.Threading.Tasks.Task.InnerInvoke() at System.Threading.Tasks.Task.Execute() --- End of inner exception stack trace --- at System.Linq.Parallel.QueryTaskGroupState.QueryEnd(Boolean userInitiatedDispose) at System.Linq.Parallel.SpoolingTask.SpoolStopAndGo[TInputOutput,TIgnoreKey](QueryTaskGroupState groupState, PartitionedStream`2 partitions, SynchronousChannel`1[] channels, TaskScheduler taskScheduler) at System.Linq.Parallel.DefaultMergeHelper`2.System.Linq.Parallel.IMergeHelper<TInputOutput>.Execute() at System.Linq.Parallel.MergeExecutor`1.Execute[TKey](PartitionedStream`2 partitions, Boolean ignoreOutput, ParallelMergeOptions options, TaskScheduler taskScheduler, Boolean isOrdered, CancellationState cancellationState, Int32 queryId) at System.Linq.Parallel.PartitionedStreamMerger`1.Receive[TKey](PartitionedStream`2 partitionedStream) at System.Linq.Parallel.AnyAllSearchOperator`1.WrapPartitionedStream[TKey](PartitionedStream`2 inputStream, IPartitionedStreamRecipient`1 recipient, BooleanpreferStriping, QuerySettings settings) at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.ChildResultsRecipient.Receive[TKey](PartitionedStream`2 inputStream) at System.Linq.Parallel.ScanQueryOperator`1.ScanEnumerableQueryOperatorResults.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient) at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient) at System.Linq.Parallel.QueryOperator`1.GetOpenedEnumerator(Nullable`1 mergeOptions, Boolean suppressOrder, Boolean forEffect, QuerySettings querySettings) at System.Linq.Parallel.QueryOpeningEnumerator`1.OpenQuery() at System.Linq.Parallel.QueryOpeningEnumerator`1.MoveNext() at System.Linq.Parallel.AnyAllSearchOperator`1.Aggregate() at System.Linq.ParallelEnumerable.Any[TSource](ParallelQuery`1 source, Func`2 predicate) at PFact.Program.Main(String[] args) in d:\myprojects\PFact\PFact\Program.cs:line 34 Any help would be appreciated. Thanks!

  Read the article

• Java Fx Data bind not working with File Read

  - by rjha94

  Hi I am using a very simple JavaFx client to upload files. I read the file in chunks of 1 MB (using Byte Buffer) and upload using multi part POST to a PHP script. I want to update the progress bar of my client to show progress after each chunk is uploaded. The calculations for upload progress look correct but the progress bar is not updated. I am using bind keyword. I am no JavaFx expert and I am hoping some one can point out my mistake. I am writing this client to fix the issues posted here (http://stackoverflow.com/questions/2447837/upload-1gb-files-using-chunking-in-php) /* * Main.fx * * Created on Mar 16, 2010, 1:58:32 PM */ package webgloo; import javafx.stage.Stage; import javafx.scene.Scene; import javafx.scene.layout.VBox; import javafx.geometry.VPos; import javafx.scene.control.Button; import javafx.scene.control.Label; import javafx.scene.layout.HBox; import javafx.scene.layout.LayoutInfo; import javafx.scene.text.Font; import javafx.scene.control.ProgressBar; import java.io.FileInputStream; /** * @author rajeev jha */ var totalBytes:Float = 1; var bytesWritten:Float = 0; var progressUpload:Float; var uploadURI = "http://www.test1.com/test/receiver.php"; var postMax = 1024000 ; function uploadFile(inputFile: java.io.File) { totalBytes = inputFile.length(); bytesWritten = 1; println("To-Upload - {totalBytes}"); var is = new FileInputStream(inputFile); var fc = is.getChannel(); //1 MB byte buffer var chunkCount = 0; var bb = java.nio.ByteBuffer.allocate(postMax); while(fc.read(bb) >= 0){ println("loop:start"); bb.flip(); var limit = bb.limit(); var bytes = GigaFileUploader.getBufferBytes(bb.array(), limit); var content = GigaFileUploader.createPostContent(inputFile.getName(), bytes); GigaFileUploader.upload(uploadURI, content); bytesWritten = bytesWritten + limit ; progressUpload = 1.0 * bytesWritten / totalBytes ; println("Progress is - {progressUpload}"); chunkCount++; bb.clear(); println("loop:end"); } } var label = Label { font: Font { size: 12 } text: bind "Uploaded - {bytesWritten * 100 / (totalBytes)}%" layoutInfo: LayoutInfo { vpos: VPos.CENTER maxWidth: 120 minWidth: 120 width: 120 height: 30 } } def jFileChooser = new javax.swing.JFileChooser(); jFileChooser.setApproveButtonText("Upload"); var button = Button { text: "Upload" layoutInfo: LayoutInfo { width: 100 height: 30 } action: function () { var outputFile = jFileChooser.showOpenDialog(null); if (outputFile == javax.swing.JFileChooser.APPROVE_OPTION) { uploadFile(jFileChooser.getSelectedFile()); } } } var hBox = HBox { spacing: 10 content: [label, button] } var progressBar = ProgressBar { progress: bind progressUpload layoutInfo: LayoutInfo { width: 240 height: 30 } } var vBox = VBox { spacing: 10 content: [hBox, progressBar] layoutX: 10 layoutY: 10 } Stage { title: "Upload File" width: 270 height: 120 scene: Scene { content: [vBox] } resizable: false }

  Read the article

• SQL Select syntax error

  - by Odette

  hi guys thanks for your help yesterday. I am now trying to incorporate the query from yesterday into an existing query so I can show the highest itemcode's reporting group in the existing query..but I have a syntax error somewhere at my Select statement. ERROR: Keyword SELECT not expected. I have tried putting brackets at every possible place but still no go..can you please help? (ps-this whole query has been giving me nightmares!) WITH CALC1 AS (SELECT OTQUOT, OTIT01 AS ITEMS, ROUND(OQCQ01 * OVRC01,2) AS COST FROM @[email protected] WHERE OTIT01 < '' UNION ALL SELECT OTQUOT, OTIT02 AS ITEMS, ROUND(OQCQ02 * OVRC02,2) AS COST FROM @[email protected] WHERE OTIT02 < '' UNION ALL SELECT OTQUOT, OTIT03 AS ITEMS, ROUND(OQCQ03 * OVRC03,2) AS COST FROM @[email protected] WHERE OTIT03 < '' UNION ALL SELECT OTQUOT, OTIT04 AS ITEMS, ROUND(OQCQ04 * OVRC04,2) AS COST FROM @[email protected] WHERE OTIT04 < '' UNION ALL SELECT OTQUOT, OTIT05 AS ITEMS, ROUND(OQCQ05 * OVRC05,2) AS COST FROM @[email protected] WHERE OTIT05 < '' UNION ALL SELECT OTQUOT, OTIT06 AS ITEMS, ROUND(OQCQ06 * OVRC06,2) AS COST FROM @[email protected] WHERE OTIT06 < '' UNION ALL SELECT OTQUOT, OTIT07 AS ITEMS, ROUND(OQCQ07 * OVRC07,2) AS COST FROM @[email protected] WHERE OTIT07 < '' UNION ALL SELECT OTQUOT, OTIT08 AS ITEMS, ROUND(OQCQ08 * OVRC08,2) AS COST FROM @[email protected] WHERE OTIT08 < '' UNION ALL SELECT OTQUOT, OTIT09 AS ITEMS, ROUND(OQCQ09 * OVRC09,2) AS COST FROM @[email protected] WHERE OTIT09 < '' UNION ALL SELECT OTQUOT, OTIT10 AS ITEMS, ROUND(OQCQ10 * OVRC10,2) AS COST FROM @[email protected] WHERE OTIT10 < '' ) (SELECT OTQUOT, DESC FROM ( SELECT OTQUOT, ITEMS, B.IXRPGP AS GROUP, C.OTRDSC AS DESC, COST, ROW_NUMBER() OVER (ORDER BY COST DESC) AS RN FROM CALC1 AS A INNER JOIN @[email protected] AS B ON (A.ITEMS = B.IKITMC) INNER JOIN DATAGRP.GDSGRP AS C ON (B.IXRPGP = C.OKRPGP) ) T WHERE T.RN = 1) SELECT A.OKPBRN, A.OCAREA, A.OTCCDE, A.OTCNAM, A.OTSMAN, A.OKPBRN||A.OAPNUM AS OTQUOT, A.OTONUM, A.OTCAD1, A.OTCAD2, A.OTCAD3, A.OTPCDE, A.OTDEL1, A.OTDEL2, A.OTDEL3, CHAR(DATE(CASE WHEN SUBSTR(A.ODOQDT,5,4) = '0000' THEN '0001' ELSE SUBSTR(A.ODOQDT,5,4) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,4,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,3,2) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,1,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,1,2) END), ISO) AS ODOQDT_CCYYMMDD, CHAR(DATE(CASE WHEN SUBSTR(A.ODDELD,7,2) = '' THEN '0001' ELSE '20'||SUBSTR(A.ODDELD,7,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,4,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,4,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,1,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,1,2) END), ISO) AS ODDELD_CCYYMMDD, B.DESC, A.OVQTVL FROM @[email protected] AS A INNER JOIN CALC1 AS B ON (A.OKPBRN||A.OAPNUM = B.OTQUOT) WHERE A.OKPBRN = '@OKPBRN@' AND A.OTCCDE NOT LIKE '*DEP%' AND CHAR(DATE(CASE WHEN SUBSTR(A.ODOQDT,5,4) = '0000' THEN '0001' ELSE SUBSTR (A.ODOQDT,5,4) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,4,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,3,2) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,1,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,1,2) END), ISO) = CHAR(CURDATE() - 3 MONTH, ISO) AND A.OCQF01 = '0' AND A.OCQF02 = '0' AND A.OCQF04 = '0' AND A.OCQF05 = '0' AND A.OCQF06 = '0' AND A.OCQF07 = '0' AND A.OCQF08 = '0' AND A.OCQF09 = '0' AND A.OCQF10 = '1' AND A.OTCGRP LIKE 'S/%' ORDER BY A.OTSMAN ASC, A.OVQTVL DESC, CHAR(DATE(CASE WHEN SUBSTR(A.ODDELD,7,2) = '' THEN '0001' ELSE '20'||SUBSTR(A.ODDELD,7,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,4,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,4,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,1,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,1,2) END),ISO) ASC

  Read the article

• Inherited varibles are not reading correctly when using bitwise comparisons

  - by Shawn B

  Hey, I have a few classes set up for a game, with XMapObject as the base, and XEntity, XEnviron, and XItem inheriting it. MapObjects have a number of flags, one of them being MAPOBJECT_SOLID. My problem is, that XEntity is the only class that correctly detects MAPOBJECT_SOLID. Both Items are Environs are always considered solid by the game, regardless of the flag's state. What is important, is that Environs and Item should almost never be solid. Here are the relevent code samples: XMapObject: class XMapObject : public XObject { public: Uint8 MapObjectType,Location[2],MapObjectFlags; XMapObject *NextMapObject,*PrevMapObject; XMapObject(); void CreateMapObject(Uint8 MapObjectType); void SpawnMapObject(Uint8 MapObjectLocation[2]); void RemoveMapObject(); void DeleteMapObject(); void MapObjectSetLocation(Uint8 Y,Uint8 X); void MapObjectMapLink(); void MapObjectMapUnlink(); }; XEntity: class XEntity : public XMapObject { public: Uint8 Health,EntityFlags; float Speed,Time; XEntity *NextEntity,*PrevEntity; XItem *IventoryList; XEntity(); void CreateEntity(Uint8 EntityType,Uint8 EntityLocation[2]); void DeleteEntity(); void EntityLink(); void EntityUnlink(); Uint8 MoveEntity(Uint8 YOffset,Uint8 XOffset); }; XEnviron: class XEnviron : public XMapObject { public: Uint8 Effect,TimeOut; void CreateEnviron(Uint8 Type,Uint8 Y,Uint8 X,Uint8 TimeOut); }; XItem: class XItem : public XMapObject { public: void CreateItem(Uint8 Type,Uint8 Y,Uint8 X); }; And lastly, the entity move code. Only entities are capable of moving themselves. Uint8 XEntity::MoveEntity(Uint8 YOffset,Uint8 XOffset) { Uint8 NewY = Location[0] + YOffset, NewX = Location[1] + XOffset; if((NewY >= 0 && NewY < MAPY) && (NewX >= 0 && NewX < MAPX)) { XTile *Tile = GetTile(NewY,NewX); if(Tile->MapList != NULL) { XMapObject *MapObject = Tile->MapList; while(MapObject != NULL) { if(MapObject->MapObjectFlags & MAPOBJECT_SOLID) { printf("solid\n"); return 0; } MapObject = MapObject->NextMapObject; } } if(Tile->Flags & TILE_SOLID && EntityFlags & ENTITY_CLIPPING) { return 0; } this->MapObjectSetLocation(NewY,NewX); return 1; } return 0; } What is wierd, is that the bitwise operator always returns true when the MapObject is an Environ or an Item, but it works correctly for Entities. For debug I am using the printf "Solid", and also a printf containing the value of the flag for both Environs and Items. Any help is greatly appreciated, as this is a major bug for the small game I am working on.

  Read the article

• Inherited variables are not reading correctly when using bitwise comparisons

  - by Shawn B

  Hey, I have a few classes set up for a game, with XMapObject as the base, and XEntity, XEnviron, and XItem inheriting it. MapObjects have a number of flags, one of them being MAPOBJECT_SOLID. My problem is that XEntity is the only class that correctly detects MAPOBJECT_SOLID. Both Items are Environs are always considered solid by the game, regardless of the flag's state. What is important is that Environs and Item should almost never be solid. Here are the relevent code samples: XMapObject: class XMapObject : public XObject { public: Uint8 MapObjectType,Location[2],MapObjectFlags; XMapObject *NextMapObject,*PrevMapObject; XMapObject(); void CreateMapObject(Uint8 MapObjectType); void SpawnMapObject(Uint8 MapObjectLocation[2]); void RemoveMapObject(); void DeleteMapObject(); void MapObjectSetLocation(Uint8 Y,Uint8 X); void MapObjectMapLink(); void MapObjectMapUnlink(); }; XEntity: class XEntity : public XMapObject { public: Uint8 Health,EntityFlags; float Speed,Time; XEntity *NextEntity,*PrevEntity; XItem *IventoryList; XEntity(); void CreateEntity(Uint8 EntityType,Uint8 EntityLocation[2]); void DeleteEntity(); void EntityLink(); void EntityUnlink(); Uint8 MoveEntity(Uint8 YOffset,Uint8 XOffset); }; XEnviron: class XEnviron : public XMapObject { public: Uint8 Effect,TimeOut; void CreateEnviron(Uint8 Type,Uint8 Y,Uint8 X,Uint8 TimeOut); }; XItem: class XItem : public XMapObject { public: void CreateItem(Uint8 Type,Uint8 Y,Uint8 X); }; And lastly, the entity move code. Only entities are capable of moving themselves. Uint8 XEntity::MoveEntity(Uint8 YOffset,Uint8 XOffset) { Uint8 NewY = Location[0] + YOffset, NewX = Location[1] + XOffset; if((NewY >= 0 && NewY < MAPY) && (NewX >= 0 && NewX < MAPX)) { XTile *Tile = GetTile(NewY,NewX); if(Tile->MapList != NULL) { XMapObject *MapObject = Tile->MapList; while(MapObject != NULL) { if(MapObject->MapObjectFlags & MAPOBJECT_SOLID) { printf("solid\n"); return 0; } MapObject = MapObject->NextMapObject; } } if(Tile->Flags & TILE_SOLID && EntityFlags & ENTITY_CLIPPING) { return 0; } this->MapObjectSetLocation(NewY,NewX); return 1; } return 0; } What is wierd, is that the bitwise operator always returns true when the MapObject is an Environ or an Item, but it works correctly for Entities. For debug I am using the printf "Solid", and also a printf containing the value of the flag for both Environs and Items. Any help is greatly appreciated, as this is a major bug for the small game I am working on.

  Read the article

• PROJECT HELP NEEDED. SOME BASIC CONCEPTS GREAT CONFUSION BECAUSE OF LACK OF PROPER MATERIAL PLEASE H

  - by user287745

  Task ATTENDENCE RECORDER AND MANAGEMENT SYSTEM IN DISTRIBUTED ENVIRONMENT ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Example implementation needed. a main server in each lab where the operator punches in the attendence of the student. =========================================================== scenerio:- a college, 10 departments, all departments have a computer lab with 60-100 computers, the computers within each lab are interconnected and all computers in any department have to dail to a particular number (THE NUMBER GIVEN BY THE COLLEGE INTERNET DEPARTMENT) to get connected to the internet. therefore safe to assume that there is a central location to which all the computers in the college are connected to. there is a 'students attendence portal' which can be accessed using internet explorer, students enter there id and get the particular attendence record regarding to the labs only. a description of the working is like:- 1) the user will select which department, which year has arrived to the lab 2) the selection will give the user a return of all the students name and there roll numbers belonging to that department; 'with a check box to "TICK MARK IF THE STUDENT IS PRESENT" ' 3) A SUBMIT BUTTON when pressed reads the 'id' of the checkbox to determine the "particular count number of the student" from that an id of the student is constructed and that id is inserted with a present. (there is also date and time and much more to normalize the db and to avoid conflicts and keep historic records etc but that you will have to assume) steps taken till this date:- ( please note we are not computer students, we are to select something of some other line as a project!, as you will read in my many post 'i" have designed small websites just out of liking. have never ever done any thing official to implement like this.) * have made the database fully normalized. * have made the website which does the functions required on the database. Testing :- deployed the db and site on a free aspspider server and it worked. tested from several computers. Now the problem please help thank youuuuuuuu a practical demonstration has to be done within the college network. no internet! we have been assigned a lab - 60 computers- to demonstrate. (please dont give replies as 60 computers only! is not a big deal one CPU can manage it. i know that; IT IS A HYPOTHETICAL SITUATION WHERE WE ASSUME THAT 60 IS NOT 60 BUT ITS LIKE 60,000 COMPUTERS) 1a) make a web server, yes iis and put files in www folder and configure server to run aspx files- although a link to a step by step guide will be appreciated)\ ? which version of windows should i ask for xp or win server 2000 something? 2a) make a database server. ( well yes install sql server 2005, okay but then what? just put the database file on a pc share it and append the connection string to the share? ) 3a) make the site accessible from the remaining computers ? http://localhost/sitename ? all users "being operators of the particular lab" have the right to edit, write or delete(in dispute), thereby any "users" who hate our program can make the database inconsistent by accessing te same record and doing different edits and then complaining? so how to prevent this? you know something like when the db table is being written to others can only read but not write.. one big confusion:- IN DISTRIBUTED ENVIRONMENT "how to implement this" where does "distributed environment" come in! meaning :- alright the labs are in different departments but the "database server will be one" the "web server will be one" so whats distributed!?

  Read the article

• Atomikos rollback doesn't clear JPA persistence context?

  - by HDave

  I have a Spring/JPA/Hibernate application and am trying to get it to pass my Junit integration tests against H2 and MySQL. Currently I am using Atomikos for transactions and C3P0 for connection pooling. Despite my best efforts my DAO integration one of the tests is failing with org.hibernate.NonUniqueObjectException. In the failing test I create an object with the "new" operator, set the ID and call persist on it. @Test @Transactional public void save_UserTestDataNewObject_RecordSetOneLarger() { int expectedNumberRecords = 4; User newUser = createNewUser(); dao.persist(newUser); List<User> allUsers = dao.findAll(0, 1000); assertEquals(expectedNumberRecords, allUsers.size()); } In the previous testmethod I do the same thing (createNewUser() is a helper method that creates an object with the same ID everytime). I am sure that creating and persisting a second object with the same Id is the cause, but each test method is in own transaction and the object I created is bound to a private test method variable. I can even see in the logs that Spring Test and Atomikos are rolling back the transaction associated with each test method. I would have thought the rollback would have also cleared the persistence context too. On a hunch, I added an a call to dao.clear() at the beginning of the faulty test method and the problem went away!! So rollback doesn't clear the persistence context??? If not, then who does?? My EntityManagerFactory config is as follows: <bean id="myappTestLocalEmf" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="persistenceUnitName" value="myapp-core" /> <property name="persistenceUnitPostProcessors"> <bean class="com.myapp.core.persist.util.JtaPersistenceUnitPostProcessor"> <property name="jtaDataSource" ref="myappPersistTestJdbcDataSource" /> </bean> </property> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="showSql" value="true" /> <property name="database" value="$DS{hibernate.database}" /> <property name="databasePlatform" value="$DS{hibernate.dialect}" /> </bean> </property> <property name="jpaProperties"> <props> <prop key="hibernate.transaction.factory_class">com.atomikos.icatch.jta.hibernate3.AtomikosJTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.autocommit">false</prop> <prop key="hibernate.format_sql">true"</prop> <prop key="hibernate.use_sql_comments">true</prop> </property> </bean>

  Read the article

• Problem with memset after an instance of a user defined class is created and a file is opened

  - by Liberalkid

  I'm having a weird problem with memset, that was something to do with a class I'm creating before it and a file I'm opening in the constructor. The class I'm working with normally reads in an array and transforms it into another array, but that's not important. The class I'm working with is: #include <vector> #include <algorithm> using namespace std; class PreProcess { public: PreProcess(char* fileName,char* outFileName); void SortedOrder(); private: vector< vector<double > > matrix; void SortRow(vector<double> &row); char* newFileName; vector< pair<double,int> > rowSorted; }; The other functions aren't important, because I've stopped calling them and the problem persists. Essentially I've narrowed it down to my constructor: PreProcess::PreProcess(char* fileName,char* outFileName):newFileName(outFileName){ ifstream input(fileName); input.close(); //this statement is inconsequential } I also read in the file in my constructor, but I've found that the problem persists if I don't read in the matrix and just open the file. Essentially I've narrowed it down to if I comment out those two lines the memset works properly, otherwise it doesn't. Now to the context of the problem I'm having with it: I wrote my own simple wrapper class for matrices. It doesn't have much functionality, I just need 2D arrays in the next part of my project and having a class handle everything makes more sense to me. The header file: #include <iostream> using namespace std; class Matrix{ public: Matrix(int r,int c); int &operator()(int i,int j) {//I know I should check my bounds here return matrix[i*columns+j]; } ~Matrix(); const void Display(); private: int *matrix; const int rows; const int columns; }; Driver: #include "Matrix.h" #include <string> using namespace std; Matrix::Matrix(int r,int c):rows(r),columns(c) { matrix=new int[rows*columns]; memset(matrix,0,sizeof(matrix)); } const void Matrix::Display(){ for(int i=0;i<rows;i++){ for(int j=0;j<columns;j++) cout << (*this)(i,j) << " "; cout << endl; } } Matrix::~Matrix() { delete matrix; } My main program runs: PreProcess test1(argv[1],argv[2]); //test1.SortedOrder(); Matrix test(10,10); test.Display(); And when I run this with the input line uncommented I get: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -1371727776 32698 -1 0 0 0 0 0 6332656 0 -1 -1 0 0 6332672 0 0 0 0 0 0 0 0 0 0 0 0 0 -1371732704 32698 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 I really don't have a clue what's going on in memory to cause this, on a side note if I replace memset with: for(int i=0;i<rows*columns;i++) *(matrix+i) &= 0x0; Then it works perfectly, it also works if I don't open the file. If it helps I'm running GCC 64-bit version 4.2.4 on Ubuntu.I assume there's some functionality of memset that I'm not properly understanding.

  Read the article

• Have suggestions for these assembly mnemonics?

  - by Noctis Skytower

  Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller halt End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >