Search Results

Search found 5413 results on 217 pages for 'git pull'.

Page 174/217 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• Linksys wireless router will not hardware reset.

  - by Jack M.

  Hello, all. I'm unable to make my router perform a hardware reset, and I cannot understand why. All was working well, except that my iPhone could not connect to the wireless. I found that the router was only allowing AES encryption on WPA2 Personal mode, so I upgraded the firmware. I updated the firmware to Ver.1.06.1, and everything went screwy. The router is no longer showing up in the WiFi list (as Linksys, or its previous network name). Wiring into the router gives me an IP address from my ISP (24.121.121.XXX). Attempting to do a hardware reset, but the power light never starts flashing and the router does not seem to reboot. My machine wired in is still online with no interruption in WoW. Pulling the power cord to force a reset returns it to the same state. I even went so far as to pull up my previous IP address (from DynDNS) and try to connect to that, but it wont even ping. What I'm trying to find out is: Did the new firmware fry the thing, or is there some way to fix this? Thanks in advance for any help.

  Read the article

• Attempting to set up xampp and zend server on the same machine

  - by umbregachoong

  I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

  Read the article

• Can't pin modified shortcuts to the Windows 7 task bar

  - by Coder

  I have a shortcut to a .bat file which I pin to the task bar using a workaround by using another icon and this seems to work. Now I make a copy of that shortcut, point it to a different .bat file, rename it, and I can't pin this one to the task bar. I have to find some other new unused icon to pin, pin it, then modify it manually. The other problem this causes is that windows seems to track which icons were pinned even if they are modified after the fact. As such, if I use media player as my dummy icon, pin it, then alter it's name and shortcut to point to a .bat file, I can't re-pin windows media player and if I select unpin from the windows media player, it unpins my shortcut to my .bat file. I can't believe how ridiculous this is. Is there a way to pin anything I want to the taskbar (ie. .bat file in my case) that does not cause problems like this? Is there an easy way I can copy an existing shortcut and modify it and re-pin it to the taskbar? The reason I want to copy it is because I start a .bat file (in particular git bash) and I set properties on the window like quick edit, increase the screen buffer and set it's position and size manually. I don't want to have to do this to every single icon I want to pin since they will be identical aside from the shortcut url.

  Read the article

• Resolving "not found" messages after doing ./configure building node.js

  - by duke

  Hello I am trying to install node.js on debian AMD64. I got node.js from git. When I do ./configure a bunch of "checking for program" messages say "not found". I want to resolve all these and ensure everything needed is present. Can anyone suggest what I need to do to resolve the "not found" messages? Thanks heaps. server:/devel/node# ./configure Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for program gcc or cc : /usr/bin/gcc Checking for gcc : ok Checking for library dl : yes Checking for library execinfo : not found Checking for openssl : not found Checking for function SSL_library_init : yes Checking for header openssl/crypto.h : yes Checking for library rt : yes --- libeio --- Checking for library pthread : yes Checking for function pthread_create : yes Checking for function pthread_atfork : yes Checking for futimes(2) : yes Checking for readahead(2) : yes Checking for fdatasync(2) : yes Checking for pread(2) and pwrite(2) : yes Checking for sendfile(2) : yes Checking for sync_file_range(2) : yes --- libev --- Checking for header sys/inotify.h : yes Checking for function inotify_init : yes Checking for header sys/epoll.h : yes Checking for function epoll_ctl : yes Checking for header port.h : not found Checking for header poll.h : yes Checking for function poll : yes Checking for header sys/event.h : not found Checking for header sys/queue.h : yes Checking for function kqueue : not found Checking for header sys/select.h : yes Checking for function select : yes Checking for header sys/eventfd.h : not found Checking for SYS_clock_gettime : yes Checking for library rt : yes Checking for function clock_gettime : yes Checking for function nanosleep : yes Checking for function ceil : yes Checking for fdatasync(2) with c++ : yes 'configure' finished successfully (1.479s) server:/devel/node#

  Read the article

• How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

  - by Chadddada

  I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

  Read the article

• get-eventlog issue

  - by Jim B

  I wanted to get a quick report of some log entries I saw on a server, so I ran: Get-Eventlog -logname system -newest 10 -computer fs1 | fl I got events back however the descriptions were all wrong. Here's an example: Index : 1260055 EntryType : Warning InstanceId : 2186936367 Message : The description for Event ID '-2108030929' in Source 'W32Time' cannot be found. The local compute r may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'time. windows.com,0x1' Category : (0) CategoryNumber : 0 ReplacementStrings : {time.windows.com,0x1} Source : W32Time TimeGenerated : 1/25/2010 10:43:31 AM TimeWritten : 1/25/2010 10:43:31 AM UserName : Note that if I pull the event ID property it's correct (in this case 38) Is this is known issue or is something wrong. The messages resolve fine via event viewer locally and remotely Here is the powershell version info: Name : ConsoleHost Version : 2.0 InstanceId : bc58fcf8-bba3-4ca8-8972-17dbd5d9ff08 UI : System.Management.Automation.Internal.Host.InternalHostUserInterface CurrentCulture : en-US CurrentUICulture : en-US PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy IsRunspacePushed : False Runspace : System.Management.Automation.Runspaces.LocalRunspace Here is the revised version info: Name Value ---- ----- CLRVersion 2.0.50727.3603 BuildVersion 6.0.6002.18111 PSVersion 2.0 WSManStackVersion 2.0 PSCompatibleVersions {1.0, 2.0} SerializationVersion 1.1.0.1 PSRemotingProtocolVersion 2.1

  Read the article

• Managing disk in a VM

  - by dst

  I'm replacing my two old rack servers with a new one that has plenty of power to take over the functionality my current servers. The server is a 4U rack mount with 16 3.5" SAS drive bays, two 2.5" bays, a Xeon E3-1230v2 CPU and 32GB of ECC RAM. My issue is the following. I would like to have a FreeBSD file server with ZFS managing disks. However, I need other VMs for e.g. a shell/git server, mail server etc. I'm wondering how to deal with the following issues: I want ZFS to fully manage the disks, so I'm not using any hardware RAID. Should I pass the SAS controller directly to the FreeBSD system as passthrough PCI? I want to maximize the reliability of the setup. On what disks should I install the hypervsor and keep server system disks? For (2) I have the option of having a RAID setup on the SAS controller and using that as system disk to store the hypervisor as well as VM images. However, this makes PCI passthrough to the file server impossible. Another option is using the two 2.5" bays. In terms of reliability how are SSDs compared to e.g. WD RE4 disks? Would it make sense to have two SSDs in software RAID as boot disks for the hypervisor or should I just go with e.g. WD RE4 disks in a software RAID setup. I also need to think about where to store the mails for the mail server, but this could be done over NFS between the VMs. BTW, this is for home use, so the load is not really that big. What I'm looking for is best practices for splitting up a server.

  Read the article

• How can I avoid a few seconds of blank video when using -vcodec copy?

  - by arlomedia

  I'm processing user-uploaded videos on a CentOS web server with ffmpeg. I need to convert each video to a standard size and format, then extract a 30-second sample clip from each video. I want to use the "-vcodec copy" flag in the extraction command to avoid encoding a second time. This command works for my initial conversion: ffmpeg -i uploaded.mov -f mp4 -vcodec libx264 -vpre medium -acodec libfaac -r 15 -b 360k -ab 48k -ar 22050 -s 480x320 formatted.mp4 And this sometimes works for the extraction: ffmpeg -i formatted.mp4 -vcodec copy -acodec copy -ss 0 -t 30 formatted_sample.mp4 However, when I run the extraction command on some videos, the extracted sample clip starts with several seconds of blank video. The audio starts right away but the video doesn't start for 3-6 seconds. To demonstrate the problem, I've uploaded two video clips and run the above commands on them. I created the first clip in Final Cut Express and encoded it with Handbrake before uploading to the web server: 1a) uploaded clip 1b) converted with first command 1c) extracted with second command, missing first six seconds By comparison, this second clip comes from Apple's website and does not show the problem: 2a) uploaded clip 2b) converted with first command 2c) extracted with second command, no problem Can anyone see what's different about the two source clips? And if so, is there anything I can do in my conversion command so that when the extraction command runs, the clip is set up to avoid the missing video? By the way, I initially had the problem with ffmpeg 0.6.1 installed from yum, but I upgraded to the latest git version and the problem remains.

  Read the article

• Are my iptables secure?

  - by Patricia

  I have this in my rc.local on my new Ubuntu server: iptables -F iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 9418 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 9418 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 5000 -m state --state NEW,ESTABLISHED -j ACCEPT # Heroku iptables -A INPUT -i eth0 -p tcp --sport 5000 -m state --state ESTABLISHED -j ACCEPT # Heroku iptables -A INPUT -p udp -s 74.207.242.5/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT iptables -A INPUT -p udp -s 74.207.241.5/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT iptables -P INPUT DROP iptables -P FORWARD DROP 9418 is Git's port. 5000 is a port used to manage Heroku apps. And 74.207.242.5 and 74.207.241.5 are our DNS servers. Do you think that this is secure? Can you see any holes here? Update: Why is it important to block OUTPUT? This machine will be used only by me.

  Read the article

• What to do with a broken OS X install disc?

  - by slhck

  First things first: I don't appreciate software piracy and I really want to spend money on software that I use and that I work and make money with. I don't want this question closed just because I consider downloading software, I only want honest opinions and alternatives. Here we go: So I have my OS X Snow Leopard Upgrade DVD, but it's horribly scratched and won't boot anymore. It endlessly loads and at some point I have to force pull it out of the disc slot. How can I reset my Mac then? Can I take my original disk to an Apple Store and ask them for a replacement? Will they believe me, even if I don't have the receipt anymore? Would owning the original disk make it okay for me to look somewhere on the internet and download it? I don't even know if that will work without hassles. Could I try to read the disk to an image with some error correction methods? Maybe during boot it can't read some files, but some other program can? Is there any other way of resetting the Mac? Mine's now over 3 years old an I seem to have misplaced my original discs that had 10.4 on it. Or should I just buy a new 10.6 upgrade disk? (Which is not really what I want to do) Answers and opinions would be much appreciated.

  Read the article

• Cannot properly read files on the local server

  - by Andrew Bestic

  I'm running a RedHat 6.2 Amazon EC2 instance using stock Apache and IUS PHP53u+MySQL (+mbstring, +mysqli, +mcrypt), and phpMyAdmin from git. All configuration is near-vanilla, assuming the described installation procedure. I've been trying to import SQL files into the database using phpMyAdmin to read them from a directory on my server. phpMyAdmin lists the files fine in the drop down, but returns a "File could not be read" error when actually trying to import. Furthermore, when trying to execute file_get_contents(); on the file, it also returns a "failed to open stream: Permission denied" error. In fact, when my brother was attempting to import the SQL files using MySQL "SOURCE" as an authenticated MySQL user with ALL PRIVILEGES, he was getting an error reading the file. It seems that we are unable to read/import these files with ANY method other than root under SSH (although I can't say I've tried every possible method). I have never had this issue under regular CentOS (5, 6, 6.2) installations with the same LAMP stack configuration. Some things I've tried after searching Google and StackExchange: CHMOD 0777 both directory and files, CHOWN root, apache (only two users I can think of that PHP would use), Importing SQL files with total size under both upload_max_filesize and post_max_size, PHP open_basedir commented out, or = "/var/www" (my sites are using Apache VirtualHosts within that directory, and all the SQL files are deep within that directory), PHP safe mode is OFF (it was never ON) At the moment I have solved this issue with the smaller files by using the FILE UPLOAD method directly to phpMyAdmin, but this will not be suitable for uploading my 200+ MiB SQL files as I don't have a stable Internet connection. Any light you could shed on this situation would be greatly appreciated. I'm fair with Linux, and for the things that do stump me, Google usually has an answer. Not this time, though!

  Read the article

• Using WebDAV for automated downloads

  - by Geo Ego

  I currently manage a number of sites (at one point about a dozen, currently four, but soon growing into the dozens or hundreds) that serve a piece of software to clients at their remote locations. Our web server is Windows SBS Server 2k3, and the remote servers are Windows Server 2k3.When we have new versions of the software, I upload this new software to a specific directory and rename it; each time the clients boot, they pull their software from that specific directory. With just a few sites, it's no problem for me to RDP in and copy the files over. As the number grows, this will quickly become quite unwieldy. So I'm thinking that WebDAV would be part of a solution, so that I could simply push the newest version to our server (Windows SBS Server 2003) and make it available to the sites to grab. However, on the remote server side, what are some suggestions for automating the download? I only want the servers to download the files during downtime (between 3 AM and 9 AM), and I only want them to download if there is a new version available. I had thought of writing a program that checked the files on the WebDAV server at a regular interval, compared a hash of the current software to a hash of the software on the server, and only downloaded if they were different, but I'm wondering if there is something I am unaware of that can automate the process.

  Read the article

• CloudFront for dynamic content CDN

  - by Elad Lachmi

  I would like to use CF as a CDN for my entire site, including static and dynamic content. I have been using CF for static content for a while and I am very happy with the results. I am now doing POC of putting the web server completely behind CF. For the dynamic content I created a new distribution and set the origin to be my web server. Right now I'm looking to test the solution, so I have the web server on the original domain and the CF distribution on the amazon domain. This works with the exception of HTTPS urls and POST requests. For HTTPS requests, I see the requests are forwarded to the original site domain for now, but how will CF handle them when I move the distribution to the www cname? What configuration changes should I make so that CF forwards HTTPS requests to the origin? For POST requests, I want the post to be made to the origin server. Can I set this up in CF? Finally, the site has membership. Can I configure CF to pull all content from the origin if the user is logged in? Sorry for the long question. I'm a little lost and documentation for dynamic CF is still kind of scarce. Thank you!

  Read the article

• Mac OS X : Open up 3 terminals, run different commands from all for each of them, to set up a develo

  - by taelor

  I'm a Ruby on Rails Web Developer and there is a lot of repetition I go through to start up my development environment. I was wondering if there is any way that I can remove some of this repetition by writing a script, or using a program (like quicksilver) or something to get my work environment going. I know how to use quicksilver to open up terminal, and I even have a saved window group to get my 3 or 4 panes open. The next thing I would love to automatically happen is getting all three to goto a certain directory, and each run different commands. One will start the local server, and in another tab, start a background process. the other would open text mate, and then start a console session, while the last one runs a svn(or git) status. Oh yah, and I would love to go ahead and open firefox, and a few tabs going to a couple of locations. Does anyone have any suggestions on how I could make all this happen in once quicksilver command, or a double click on some type of script on my Desktop?

  Read the article

• Best tool for monitoring backups, etc. and trending statstics from that data

  - by Randy Syring

  I have done some research on nagios, opennms, and zenoss but am not confident that I have found what I am looking for. The main driving force for me right now is being able to monitor backups. This includes mysql, mssql, and eventually some file system backups. We have a tool that wraps the backup process for these different systems and collects statistics. So, items like: number of databases backed up size of db backup file size of db backup file compressed time to make backup time to zip file I want to be able to A) have notifications if the jobs are not run according to schedule B) be able to set thresholds on the statistics which would trigger notifications C) I want to be able to trend and graph the statistics I am planning on sending this information to the monitoring application through an HTTP POST. Or, the monitoring application could pull it from a log file as well. However, we will have other processes with other "arbitrary" (from the monitoring system's perspective) statics that will want to monitor and trend, so flexibility is very important. The tool or tools should also be able to do general monitoring and trending of network interfaces, server load, etc. Once we get the backup monitoring in place, we will want to include those items as well. Thanks.

  Read the article

• Want to use something like Citrix XenDesktop, Free Alternative?

  - by Chris

  I'm looking to go into IT, general office server management, and it looks like XenDesktop would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenDesktop to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily boot a thin client OS that connected to XenDesktop. Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

  Read the article

• RRAS Problem routing to central site from RRAS server only?

  - by TomTom

  Given is an office connected to headquarters using a RRAS bridge (2 virtual machines using RRAS to route between the two networks). Naming: The office is A, the RRAS on A is a-lnk. THe headquartters is B, b-lnk the RRAS machine there. The VPN works perfectly - machines can ping and work between the sites. Domain controllers on both ends replicating, DFS working, remote desktop working. All in all... everything is fine. EXCEPT: a-lnk itself can not reach any machine in B. This would normally not be troublesome (noone ever does anything on a-lnk), but there are two exceptions: * a-lnk is supposed to get it's license from a KMS in B, so not being able to reach B means it is not prolonging. * a-lnk is supposed to pull updates from a WSUS in B - and not being able to reach B means - no updates. Given that thigns work (and security is a minor issue - A-lnk is not reachable from the internet as it is behing a NAT hardware anyway) this got not handled for months. I just wan to get this item ticked off now. Anyone an idea what this is? It definitely is not a "dns does not work" or "routing in general is bad" item, as any computer in A can connect to any computer in B, and the other way arount - only the RRAS computer itself seems to do something really awkward. Platform for both: 2008 R2 standard.

  Read the article

• Barriers to IPv6 deployment: addressing

  - by sysadmin1138

  There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

  Read the article

• TCPDump and IPTables DROP by string

  - by Tiffany Walker

  by using tcpdump -nlASX -s 0 -vvv port 80 I get something like: 14:58:55.121160 IP (tos 0x0, ttl 64, id 49764, offset 0, flags [DF], proto TCP (6), length 1480) 206.72.206.58.http > 2.187.196.7.4624: Flags [.], cksum 0x6900 (incorrect -> 0xcd18), seq 1672149449:1672150889, ack 4202197968, win 15340, length 1440 0x0000: 4500 05c8 c264 4000 4006 0f86 ce48 ce3a E....d@[email protected].: 0x0010: 02bb c407 0050 1210 63aa f9c9 fa78 73d0 .....P..c....xs. 0x0020: 5010 3bec 6900 0000 0f29 95cc fac4 2854 P.;.i....)....(T 0x0030: c0e7 3384 e89a 74fa 8d8c a069 f93f fc40 ..3...t....i.?.@ 0x0040: 1561 af61 1cf3 0d9c 3460 aa23 0b54 aac0 .a.a....4`.#.T.. 0x0050: 5090 ced1 b7bf 8857 c476 e1c0 8814 81ed P......W.v...... 0x0060: 9e85 87e8 d693 b637 bd3a 56ef c5fa 77e8 .......7.:V...w. 0x0070: 3035 743a 283e 89c7 ced8 c7c1 cff9 6ca3 05t:(>........l. 0x0080: 5f3f 0162 ebf1 419e c410 7180 7cd0 29e1 _?.b..A...q.|.). 0x0090: fec9 c708 0f01 9b2f a96b 20fe b95a 31cf ......./.k...Z1. 0x00a0: 8166 3612 bac9 4e8d 7087 4974 0063 1270 .f6...N.p.It.c.p What do I pull to use IPTables to block via string. Or is there a better way to block attacks that have something in common? Question is: Can I pick any piece from that IP packet and call it a string? iptables -A INPUT -m string --alog bm --string attack_string -j DROP In other words: In some cases I can ban with TTL=xxx and use that should an attack have the same TTL. Sure it will block some legit packets but if it means keeping the box up it works till the attack goes away but I would like to LEARN how to FIND other common things in a packet to block with IPTables

  Read the article

• When machine is turned on, only the fan runs

  - by Gopal

  Hi, I have an issue slightly similar to this one posted here, http://superuser.com/questions/127016/troubleshooting-monitor-never-turns-on-system-fans-running-dvd-rom-does-not-op My configuration is as follows: EPOX 9NPA+ Ultra motherboard AMD Athlon 64 CPU Corsair 2 x 1GB PC3200 DDR RAM 1 DVD RW drive and 1 CD ROM Drive SATA 250 GB Hard drive 400W Power supply EVGA 256MB graphics card I have had this configuration for about four years. Last month, I started having issues in starting the machine. It wouldn't start when I press the ON button in the front of the case. So I used to pull out the power cord and plug it back in and then switch on in the front, and it used to work fine. And then one fine day, when I plugged in the power cord at the back, even without switching on the power-on button at the front, I saw that the fan at the back was running. So I opened the system. Then I could see that all the fans inside were running. I replaced the power supply. No luck there. Then I replaced the CMOS battery. Again nothing improved. Even when I removed all the cards and memory, I still get one short beep. That's it. Any idea how to proceed on this? Anything else could be checked? I want to confirm if this is a motherboard failure, before proceeding to replace it.

  Read the article

• Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

  - by Richard Whitman

  I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

  Read the article

• Error compiling PHP 5.5.9 on CentOS 6.5 during make command

  - by Chris Mancini

  Here is the error message: cc: internal compiler error: Killed (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 The very last thing make was processing is apprentice.lo which appears to be part of the image manipulation libraries (maybe?). I am using Ansible to provision my instance. It is a Digital Ocean single core 512MB VM. I have been using vagrant / ansible with the same config locally for dev and it has compiled fine, this is the first cloud VM I am attempting to provision. The only difference is the base image for my DO server is coming from DO and for my local dev, I built my own Vagrant box via VirtualBox from a stock CentOS basic server install. I pull it down from my DropBox. The problem has been experienced by others and reported as a php bug report My php ansible role up to the error: --- - name: Download php source get_url: url={{ php_source_url }} dest=/tmp register: get_url_result - name: untar the source package command: tar -xvf php-{{ php_version }}.tar.gz chdir=/tmp when: get_url_result.changed or php_reinstall - name: configure php 5.5 command: > ./configure --prefix={{ php_prefix }} --with-config-file-path={{ php_config_file_path }} --enable-fpm --enable-ftp --enable-mbstring --enable-pdo --enable-soap --enable-sockets=shared --enable-zip --with-curl --with-fpm-group={{ nginx_group }} --with-fpm-user={{ nginx_user }} --with-freetype-dir=/usr/lib64/ --with-gd --with-jpeg-dir=/usr/lib64/ --with-libdir=lib64 --with-mcrypt --with-openssl --with-pdo-mysql --with-pear --with-readline --with-tidy --with-xsl --with-zlib --without-pdo-sqlite --without-sqlite3 chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall - name: make clean when reinstalling command: make clean chdir=/tmp/php-{{ php_version }} when: php_reinstall - name: make php command: make chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall Thanks in advance for any help. :)

  Read the article

• Puppet variables best practice, generalise or specialise?

  - by Andrei Serdeliuc

  I'm trying to figure out which things should be in git within the puppet manifest and which should be in env vars like FACTER_my_var and use that in the manifest instead. Scenario: you are deploying 3 php apps and you've already built all the layers up to the app in other manifests (base system, php extensions, users, etc), and all that's left is installing the correct app (from an apt repo) and creating a vhost. I'm tempted to have something along the lines of: apache::vhost { $::project_hostname: priority => '10', port => '80', docroot => $::project_document_root, logroot => "/var/log/apache2/${$::project_name}", serveradmin => '[email protected]', require => Package[httpd], ssl => false, override => 'all', setenv => ["APP_KERNEL dev"] } This would run on each server, and the FACTER_project_* vars would be set on a per server basis. An obvious restriction of this would be that you can't run more than one app with this specific example. Or would you rather have project_x.pp, project_y.pp which have hardcoded paths and names?

  Read the article

• Is there any way to synchronize Outlook RSS Feeds with BlackBerry?

  - by nvuono

  Does anyone know how I can view the contents of my Outlook 2007 RSS Feeds from a corporate-issued BlackBerry? Our Inbox and Calendar are already integrated with corporate exchange servers but it looks like nobody cares too much about the RSS Feeds. Is there some setting on my Blackberry or in Outlook I could possibly tweak to include these updates? I know there are many standalone RSS readers available for blackberry (Google Reader for example) but I mention Outlook RSS Feeds specifically in my question because I am subscribing to a number of RSS feeds I've setup on my intranet for various version control systems that would be inaccessible to an external RSS reader. It seems like I might have to setup some sort of email commit notifications if I want anything from my blackberry but I much prefer the 'pull' method of an RSS feed viewer over receiving streams of emails. Please feel free to suggest any alternatives! Edit: I've additionally tried moving my "SVN Repository" folder directly into my Mailbox instead of keeping it as a child of the RSS Feeds folder. This allows me to view the SVN Repository folder on my blackberry where previously the RSS Feeds folder and all children were hidden but unfortunately it never seems to get populated with the items that are displaying in Outlook. I've even made a fresh commit to make sure that the SVN Repository folder still works correctly in Outlook from outside the RSS Feeds folder but no luck on the BlackBerry end of things. BlackBerry Model Details: BlackBerry 8310 smartphone (EDGE) v4.2.2.170 Platform 2.5.0.30

  Read the article

• Automated Linux VMs on Hyper-V 2012

  - by Mick

  I have a requirement to create a ton of linux VMs for our customers (we run managed infrastructure) on Hyper-V 2012 in the coming months and I have an issue with automating it. Here is how I need it to work: User accesses their web page and creates a VM. VM is created with a unique IP and name User logs in over SSH I know Hyper-V quite well and can work with powershell and am a C# programmer so the development side of things is taken care of. I also know enough about Linux to be at least competent: I have used it on and off for a number of years but not done anything Enterprise-level with it. All this can be done easily by manual processes but I need to be able to script or program this to automate it as there could be hundreds of them being created but I don't know how. My first thought is to have a database with random-generated names and IPs already created but I don't know how to get a Linux VM to boot up and grab one from the database... I suppose a Kickstart script would take care of it but I don't know what to do from there. Here is what is bouncing around in my head: Create a std linux build. - Easy to do Someone clicks "Create VM" and I pull a name and IP from the database and write it to a kickstart script. - Easy to do I could then open the template VHDX file and copy in the script and then save it. - Not sure if possible User boots up new VM and the kickstart script gives it the name and IP I assigned it. My problem is that I don't know how to open a VHDX file and insert a kickstart script into it... can't figure it out. I am reaching here and this solution may be miles off... I am more used to creating Windows VMs with scripts and so on which i am more familiar with... any help would be appreciated. Thanks Mick

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >