Search Results

Search found 19921 results on 797 pages for 'big ip'.

Page 175/797 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

  • Management VLAN Cisco Catalyst

    - by cha789
    I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

    Read the article

  • Why can't I create an Alias Resource Record Set for an EC2 instance

    - by praterade
    I have been working with AWS for over a year, setting up EC2 instances, domains, ELBs, etc. When I want to assign a subdomain to an EC2 instance, I have to create an elastic IP (that I pay for), then assign a CNAME record to that elastic IP. When I want to assign a subdomain to an ELB (load balancer) instance, I just create an alias resource record set to the ELB. I've read over the docs and don't understand why AWS doesn't support aliasing to instances. Am I missing a key concept here? Wouldn't it be simpler to just alias EC2 instances and skip the whole elastic IP bit?

    Read the article

  • Is there a way to see any tar progress per file?

    - by Svish
    I have a couple of big files that I would like to compress. I can do this with for example tar cvfj big-files.tar.bz2 folder-with-big-files The problem is that I can't see any progress, so I don't have a clue how long it will take or anything like that. Using v I can at least see when each file is completed, but when the files are few and large this isn't the most helpful. Is there a way I can get tar to show more detailed progress? Like a percentage done or a progress bar or estimated time left or something. Either for each single file or all of them or both.

    Read the article

  • VPN, routing, specified application

    - by Adrian
    Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

    Read the article

  • Windows file sharing connects over WiFi instead of LAN

    - by zacaj
    I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • Sonicwall Enhanced With One-To-One NAT, Firewall Blocking Everything

    - by Justin
    Hello, just migrated from a Sonicwall TZ180 (Standard) to a Sonicwall TZ200 (Enhanced). Everything is working except the firewall rules are blocking everything. All hosts are online, and being assigned correct ip addresses. I can browse the internet on the hosts. I am using one-to-one NAT translating public ip addresses to private. 64.87.28.98 -> 192.168.1.2 64.87.28.99 -> 192.168.1.3 etc First order of business is to get ping working. My rule is in the new firewall is (FROM WAN to LAN): SOURCE DESTINATION SERVICE ACTION USERS ANY 192.168.1.2-192.168.1.6 PING ALLOW ALL This should be working, but not. I even tried changing the destination to the public ip addresses, but still no luck. SOURCE DESTINATION SERVICE ACTION USERS ANY 64.87.28.98-64.87.28.106 PING ALLOW ALL Any ideas what I am doing wrong?

    Read the article

  • Unable to connect my computer from LAN (http, smb) in UBUNTU 10.04

    - by Abdul Majeed
    I installed ubuntu 10.04, Apache, PHP, mysql, smb. Everything work fine in locally in my IP. When i trying to access my computer from LAN (other computer), it shows unable to connect. when i ping my IP from remote computer, its pinging OK. I can access internet, and all other systems (http, smb). But the problem is no one can't access my computer remotely in my LAN network. My ip is 192.168.85.105 and i want access(Appaceh,SMB) from 192.168.85.10. Is there any proxy firewall settings? I had tried following commands.. sudo iptables -F or sudo iptables-restore [logout require] If it does not work then try to disable net-filter sudo ufw --disable Please give me the solution.

    Read the article

  • IIS7 VPS Hosting Server Configuration

    - by Craig
    I have just registered a Windows 2008 VPS hosting account which I plan on running a couple of web sites on. In the past I have just used shared hosting in which everything is set up for me, so need a few pointers. When I register a new domain it asks for a couple of name servers. How do I set this up on my server? Can I just give it the IP address of the VPS server? Do I have to register some web sites with ns1, ns2 host headers in IIS? It's all a bit confusing when never done before. I have two web sites I plan on hosting. I configured both in IIS with a different IP address (the VPS plan has 2) but when trying to access the site via IP it always displays the default web site. If I turn off the default web site it just 404's. Is there any simple tutorials for setting up a couple of sites from scratch.

    Read the article

  • How to configure 2nd network card for use in VMWare Workstation?

    - by Timo
    Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

    Read the article

  • Isn't NAT a MUST when a LAN uses rfc 1918 private IPs?

    - by aks
    Isn't NAT a MUST when a LAN uses rfc 1918 private IPs? Can an organization assign its hosts with private IPs and still communicate with the external world without NAT? how can an internal host with a private IP (say 10.1.1.1) communicate with external world without NAT? I mean, how can the reply/response packet from the external world reach the original source as the packet with Dest IP = 10.1.1.1 will get lost as it can not be routed as many organizations can use the same IP. Why doesn't rfc 1918 (Address Allocation for Private Internets) make any mention of NAT?

    Read the article

  • On Mikrotik RouterOS, is it possible to get Netflow information from a bridged connection?

    - by Tim
    I have a RouterOS box set up to bridge two ethernet connections. I have use-ip-firewall=yes in the bridge configuration, so that the ports go through the firewall. I've enabled netflow reporting via ip/traffic-flow, but the only packets I see reported are broadcast and multicast packets, not the packets that are flowing through the bridge. The documentation indicates that traffic flow logging happens after firewall processing and that it won't work with bridged connections by default, but I would have thought that use-ip-firewall=yes ought to address this. Is it possible to make this work somehow?

    Read the article

  • Hosting a site on amazon ec2

    - by Khalid Mushtaq
    I have recently bought an amazon ec2 instance. Now I want to host a website. I have googled and found some useful info but there is some confusion in my mind. Suppose domain name is "http://www.example.com" That's what I have done so far. I have configured my domain locally on amazon ec2 instance and it's working fine when I open that url in amazon ec2 instance's browser. I have used http://www.example.com in /etc/hosts file point it to 127.0.0.1 to open locally on instance. I have got one elastic ip address and associated it with the instance. I have changed http://www.example.com A's record with the elastic IP that I have got in above step. Now what should I do? When some user will open my website anywhere in the world, will it get pointed to my instanace's ip address? Have I done proper configurations for website on instance?

    Read the article

  • How to set up hosting on Heroku and email forwarders on a WHM (cPanel)?

    - by matija
    I'm using DNSimple for managing my records, hosting my site at Heroku and I want to use a Linux WHM (cPanel) for managing emails forwarding (DNSimple has that feature, but it's currently not working properly). Hosting works, but I'm having a hard time getting emails to work. Here are my (pseudo-)records: Type Name TTL Points to --------------------------------------------------------- ALIAS | mydomain.com | 3600 | mydomain.herokuapp.com CNAME | www.mydomain.com | 3600 | mydomain.herokuapp.com CNAME | mail.mydomain.com | 600 | <WHM server IP address> MX | mydomain.com | 600 | <WHM server IP address> NS | mydomain.com | 3600 | ns1.dnsimple.com ... | ... | ... | ... NS | mydomain.com | 3600 | ns4.dnsimple.com There are two more records, SOA and TXT, generated by DNSimple, but I don't think those are relevant. When I add an A-record: A | mydomain.com | 3600 | WHM server IP address and change the mail CNAME and MX records to mydomain.com, emails start working, but then the hosting doesn't work anymore. Is this possible to achieve?

    Read the article

  • Best way to replicate servers

    - by Matthew
    I currently have two servers both with linux software RAID1 configurations. They use heartbeat and DRBD to create a shared DRBD device that hosts a a exported NFS directory. The servers run Ubuntu Server with a LXDE GUI and some IP These servers are going to be placed on fishing vessels to act has redundant storage for IP cameras. My boss wants me to figure out the most efficient way to create these servers. We might be looking at pushing out several systems a week. Each configuration will be almost identical besides IP addressing. What would be the best method to automate the configuration process? We are trying to cut down on labor costs to set these up. Imaging and Proceeding are both on my mind right now

    Read the article

  • Is there a way to determine which service does an outgoing connection?

    - by fluxtendu
    I'm redoing my firewall configuration with more restrictive policies and I would like to determine the provenance (and/or destination) of some outgoing connections. I have an issue because they come from svchost.exe and go to web content/application delivery providers - or similar: 5 IP in range: 82.96.58.0 - 82.96.58.255 --> Akamai Technologies akamaitechnologies.com 3 IP in range: 93.150.110.0 - 93.158.111.255 --> Akamai Technologies akamaitechnologies.com 2 IP in range: 87.248.194.0 - 87.248.223.255 --> LLNW Europe 2 llnw.net 205.234.175.175 --> CacheNetworks, Inc. cachefly.net 188.121.36.239 --> Go Daddy Netherlands B.V. secureserver.net So is it possible to know which service does a particular connection? Or what's your recommendation about the rules applied to these ones? (Comodo Firewall & Windows 7)

    Read the article

  • Why is it a bad idea to use multiple NAT layers or is it?

    - by iamrohitbanga
    The computer network of an organization has a NAT with 192.168/16 IP address range. There is a department with a server that has an IP address 192.168.x.y and this server handles hosts of this department with another NAT with the IP address range 172.16/16. Thus there are 2 layers of NAT. Why don't they have subnetting instead. This would allow easy routing. I feel multiple layers of NAT can cause performance losses. Could you please help me compare the two design strategies.

    Read the article

  • Mounting Gluster Volumes

    - by Roman Newaza
    I have created Hosted Zone with 2 IP addresses of Gluster Cluster, both IP are returned by dig. After mounting Gluster, I cannot ls mount point as it takes long time. mount shows me it's mounted, but df doesn't. Finally, I have this: ls: cannot access /mnt/storage: Transport endpoint is not connected. But if I mount it with the one of the IP, no problem - volume contents is accessible OS: Ubuntu 11.10 GlusterFS: 3.2.6 Log: http://pastie.org/private/2jgp4h1hnqgzych3djtg I have can telnet storage from client - ports are open.

    Read the article

  • NAT rules betweek 2 network interfaces (with iptables)

    - by Simone Falcini
    this is the current network that I have: UBUNTU: eth0: ip: 212.83.10.10 bcast: 212.83.10.10 netmask 255.255.255.255 gateway 62.x.x.x eth1: ip: 192.168.1.1 bcast: 192.168.1.255 netmask: 255.255.255.0 gateway ? CENTOS: eth0: ip: 192.168.1.2 bcast: 192.168.1.255 netmask 255.255.255.0 gateway 192.168.1.1 I basically want this: Make specific NAT rules from the internet to specific internal servers depending on the port: Connections incoming to port 80 must be redirected to 192.168.1.2:80 Connections incoming to port 3306 must be redirected to 192.168.1.3:3306 and so on... I also need one NAT rule to allow the servers in the subnet 192.168.1.x to browse the internet. I need to route the requests on eth0 to eth1 to be able to exit to internet. Can I do this on the UBUNTU machine with iptables? Thanks!

    Read the article

  • Too many connectons to 212.192.255.240

    - by Castor
    Recently, my Internet slowed down drastically. I downloaded a tool to see the TCP/IP connections from my Vista computer. I found out that a lot TCP/IP connections are being connected to 212.192.255.240 through SVCHost. It seems that it is trying to connect to different ports. I think that my computer is being infected with some kind of malware etc. But I am not sure how to get rid of it. I did a little bit of research on this IP but found nothing. Any suggestions are highly apprecitated.

    Read the article

  • lots of dns requests from China, should I worry?

    - by nn4l
    I have turned on dns query logs, and when running "tail -f /var/log/syslog" I see that I get hundreds of identical requests from a single ip address: Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#10856: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#44334: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#15268: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#59597: query: mydomain.de IN ANY + The frequency is about 5 - 10 requests per second, going on for about a minute. After that the same effect repeats from a different IP address. I have now logged about 10000 requests from about 25 ip addresses within just a couple of hours, all of them come from China according to "whois [ipaddr]". What is going on here? Is my name server under attack? Can I do something about this?

    Read the article

  • Two mail servers, need help with dns configuration for the backup one

    - by user92231
    I need to run a redundant backup mail server in case the main one goes down. The settings in GoDaddy look something like the following: A (Host) Host Points to @ ip address of mail1 41.x.x.x mail1 ip address of mail1 41.x.x.x mail2 ip address of mail2 196.x.x.x MX Priority host points to 10 @ mail1.mydomain.com 20 @ mail2.mydomain.com When mail1 goes down, mail2 is able to get emails. I can access it through the browser with no problem, but I want my users to able to pop3/smtp as well without changing anything in their outlook. I dont want any impact to the users when mail1 is down. Also, I'm using the windows server DFS to keep both folders of the mails in sync. Is this the right way, or should I be using something else?

    Read the article

  • Run script when POST data is sent to Apache

    - by Nathan Adams
    Among my several years of running servers there seems to be a pattern with most spam activity. My question/idea is that is there a way to tell Apache to run a script when POST data is detected? What I would want to do is perform a reverse DNS lookup on the client's IP address, and then perform a DNS lookup on the hostname in the PTR record. Afterwards, perform some checks, excuse the pseudo-code: if PTR does not exist: deny POST request if IP of PTR hostname = client's IP Allow POST request else deny POST request Though I don't care about GET requests, even though they can be just as malicious, this idea is targeted towards spam comments which use POST data to send the comment data to the web server. In order to make sure there isn't much of a time delay, I would run my own recursive DNS server. Please do note, this isn't meant to be a sliver bullet to spam, but it should decrease the volume. Possible or impossible?

    Read the article

  • How do I set up my own proxy server?

    - by NJTechGuy
    This website (abc.com) slowed access from our original IP address. How do I implement my own proxy server to hide my IP while browsing abc.com? Do I need special hardware/software combo to achieve this? If I can generate about 5 proxies and alternate amongst those 5 while browsing abc.com would be awesome. Please suggest. Thanks guys! p.s : I want to know if I can generate proxy IPs of the type 123.34.21.140 prot 80 on my own? I want to use those IP/port combos in my Python scripts (urllib2/set_proxy).

    Read the article

  • Distribute outgoing connections among multiple IPs configured on the same NIC

    - by cedivad
    I have a NIC with 2 aliases on it. The network interface has 3 IPs configured on it. Think about it like this: i can ping the same server by hitting .100 .101 and .102. I want the source address of the outgoing connections to be distributed among these ip. So if i have 3 opened connections, one connection will have result as having an IP address ending with .100, the other two should result as having as ip addresses .101 and .102. I'm using FreeBSD but I think this question to be Linux-Like wide.

    Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >