Search Results

Search found 5291 results on 212 pages for 'disable'.

Page 176/212 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Chrome will not load a web page with an <embed> element

  - by rossmcm

  I have been trying to get a simple sound web page going: Sound.html <script> function PlaySound () { var sounder = document.getElementById ("ToneA") ; sounder.Play () ; } </script> <embed id="ToneA" height="1" width="1" src="https://dl.dropboxusercontent.com/u/311035/ToneA.mp3" autostart="false" enablejavascript="true"//> <button onclick="PlaySound () ;">Play</button> The test web page is here. It plays in IE, but not in Firefox or Chrome. My problem: Chrome reports "Could not load VLC Plugin". It seems to be a known problem that the VLC community don't necessarily feel like fixing at the moment, and is a result of Google choosing not to allow some certain kind of plugin. If I disable the plugin I no longer get the message but nothing happens when I click the button. Looking at the console in a debug window I see Uncaught TypeError: undefined is not a function Sound.html:7 PlaySound Sound.html:7 onclick which suggests Chrome could not find anything else to handle the sound file. How to I tell Chrome to use (e.g.) Windows Media Player? * UPDATE * This is apparently because the VLC plugin is a NPAPI plugin and Chrome no longer supports these. I have uninstalled VLC and this has removed the error on loading the webpage with an embedded sound element, but it still doesn't invoke WMP instead.

  Read the article

• Laptop Synaptics Touchpad No Longer Functional After Windows 7 Upgrade

  - by Chance

  I have a Toshiba laptop, with an integral Synaptics (PS/2 port) touch pad, that I bought pre-installed with 32-bit Windows Vista. After doing a clean install of 32-bit Windows 7, I can no longer get the touch pad to respond. The function (FN) keys on the laptop still operate correctly, but they no longer display on screen when used. I have no way of knowing if the function key to enable / disable the touch pad is working correctly, although the function keys for dim / brighten display, as well as others, work fine. I have removed the device from the device manager and allowed it to reinstall with no success. I have removed the previous drivers and updated them with the current 32-bit Win7 compatible versions from Synaptics website, with no success. The Synaptics icon displays in the taskbar, and the touch pad is available in the Device Manager, both of which say the device is installed and working correctly. I have checked to make sure that the touch pad is enabled in the Synaptics menu, and have tried toggling enabled / disabled with no success. If anyone has any suggestions, or knows where I can find a solution, I would be very appreciative.

  Read the article

• Windows 7 automatically logs out when logging in

  - by Luke

  A Windows 7 HP x64 computer is set to automatically log in (no password), but once it starts logging in, it starts to load the desktop after the welcome screen, but before icons or background images are loaded, it goes to the Welcome screen saying 'Logging Off'. I can log in with Safe Mode, and I ran a couple different virus scans, with no detections. I also tried checking the userinit.exe file in System32 (as suggested by MANY users for Windows XP), but it's the same version as a working system. I also checked the registry under HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon for the SHELL and UserInit values, but they look normal. I tried to disable all startup items (through MSCONFIG) to select Diagnostic boot, but then I get a blue screen about the video driver not loading. Any other ideas? EDIT I created a new user, and it could log in no problems. I am thinking it's the NTUSER.DAT file. I just renamed it to NTUSER.DAT.old, then tried logging in as the problem user. I could log in, but as a TEMP profile. His profile folder is now C:\Users\TEMP, and his old folder is still accessible but in the wrong location. EDIT 2 I can't seem to turn off the TEMP profile, so I'm open to other suggestions. Copying the folders (i.e. Documents, Music, etc) does not work, as it creates an additional TEMP.000 then TEMP.001 folder each time the user logs in.

  Read the article

• Azure VM won't boot after sysprep; integration tools installed

  - by Mark Williams

  I have installed the Azure Integration Components and used sysprep on a Windows 2012 VM. Now the machine won't start up. I uploaded the VHD to Azure - it failed there too. When I start up the VM I get a PowerShell window that hangs out for a bit; eventually I get the following error, after which the machine restarts. New-Object: The dependency service or group failed to start. (Exception from HRESULT: 0x8007042C) At line1: char:1 New-Object -comobject WaAgent.WindowsSetupComponent | % { $_.HandleSetupError() ... ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +CategoryInfo : ResourceUnavailable (:) [New-Object], COMException +FullyQualifiedErrorId: NoCOMClassIdentified,Microsoft.PowerShell.Commands.NewObjectCommand I have tried renaming unattended.xml and turning on bootlogging. Neither of those yielded much help. Is there a way I can disable the Azure components that run during OOBE? That seems to be the source of the problem. Mounting the VHD is easy. 0x8007042C looks like a firewall issue, based on my googling. Unfortunately I can't get the machine to boot so I can figure that issue out. Also, I can't get around this problem by booting into safe mode. Thanks for your help, guys.

  Read the article

• WSUS registry file: NoAutoRebootWithLoggedOnUsers entry being ignored

  - by the_pete

  We are using a registry entry to connect our internal workstations to our WSUS server and everything seems to be working except the NoAutoRebootWithLoggedOnUsers entry. Without fail, over the last few weeks, our lab setup as well as our users have been prompted to restart their machines with a 15 minute time out and there's nothing they can do about it. They can't postpone or cancel the restart, all options in the prompt are greyed out. Below is the registry file we are using to connect our workstations to our WSUS server: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "AcceptTrustedPublisherCerts"=dword:00000001 "ElevateNonAdmins"=dword:00000000 "WUServer"="http://xxx.xxx.xxx.xxx:8530" "WUStatusServer"="http://xxx.xxx.xxx.xxx:8530" [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU] "AUOptions"=dword:00000004 "AutoInstallMinorUpdates"=dword:00000001 "DetectionFrequencyEnabled"=dword:00000001 "DetectionFrequency"=dword:00000002 "NoAutoUpdate"=dword:00000000 "NoAutoRebootWithLoggedOnUsers"=dword:00000001 "RebootRelaunchTimeout"=dword:00000030 "RebootRelaunchTimeoutEnabled"=dword:00000001 "RescheduleWaitTime"=dword:00000020 "RescheduleWaitTimeEnabled"=dword:00000001 "ScheduledInstallDay"=dword:00000000 "ScheduledInstallTime"=dword:00000003 "UseWUServer"=dword:00000001 There is a bit of redundancy, if you want to call it that, having both the NoAutoRebootWithLoggedOnUsers entry as well as the entries for RebootRelaunchTimeout but we wanted to see if we could either disable the restart, or give our users a larger window within which they could wrap up their work, etc. before restarting. Neither of these entries seems to work, but our priority is getting NoAutoRebootWithLoggedOnUsers working and any help with this would be greatly appreciated.

  Read the article

• Mod_pagespeed, Varnish and Apache cache issues after new code pushes

  - by WerkkreW

  I have a rather strange issue. In my environment we are running a load balanced cluster of 8 apache servers with a master-master MySQL backend. In front of apache we have Varnish in the cache layer. We have been running Apache mod_pagespeed for several weeks now and for the most part it has been working great. The issue arises when we do fresh code updates from Git, and and/all of the JS/CSS assets change. Basically the problem appears to be two fold. One, after the code push we generally take the opportunity to flush varnish, restart apache, and restart varnish. In doing this all of the mod_pagespeed combinied/minified files are cleared out ensuring that all of the new JS/CSS assets are fresh. The problem is, upon doing this the file names that mod_pagespeed creates change, but the old files (appear) to be still cached for many people client side leading to very unexpected results. However, if we do not restart apache, the changes to the files may or may not appear client side due to the cached minified assets. The simple solution is to disable mod_pagespeed, however I would rather not do that as it has made a fairly large impact in performance. I feel as if there must be a better way to deal with the inconsistencies in cache between the client and server to prevent having people to go to great lengths or perform a large number of page refreshes to see a working page. I can provide configuration snippets if anyone needs them. If you would like to inspect the site, source, headers, or anything try the following addresses: http://wellplayed.org http://wellplayed.org/tv Thanks in advance!

  Read the article

• Sendmail slow to accept emails

  - by Rich

  I have a PHP web app which is using SMTP to sendmail on localhost to send email. I would like sendmail to accept the mail request immediately and queue it for later sending, as I don't want to have user-facing request threads blocked on emails. Sendmail is installed with the default settings on RHEL web servers. Sometimes sendmail is blocking for a long time after the MAIL command is sent -- sometimes taking 60 or 90 seconds to accept the mail. The time take is usually very close to 60 or 90 sec, which makes me think this is some kind of timeout. I have looked in the sendmail logs, and there are plenty of "deferred" emails, but nothing which looks responsible for this delay. How can I diagnose what is slowing down sendmail? How can I configure sendmail to always accept the mail immediately and to queue the mail for later sending? Update: I'm not sure, but it looks like this might be linked to aol.com addresses. I strongly suspect that sendmail is doing some kind of blocking receipient address verification at the accept-email-for-sending stage. How can I disable that, so that sendmail doesn't block my UI threads? Update 2: This only seems to happen at busy times. Perhaps I am running out of sendmail threads or something? How can I check that?

  Read the article

• "Document in ADF" on Canon MX340

  - by Michael Donohue

  I have a Canon MX340 multifunction printer. Recently, it keeps saying "Document in ADF" when I turn on the printer. I've tried clearing this multiple times, but as soon as the feeder wheels stop turning, in an attempt to clear the document feeder, it just pops up the same error again. This is particularly annoying, as it blocks all functions on the device - I cannot print, even though printing has no interaction with the document feeder. I've opened up the feeder device, as much as can be done with fingers alone. There just doesn't seem to be anything in there. I ran a sheet of paper through about six times, just to see if some dust might be getting in the way, and I've blown out the feeder with air. Still nothing. At this point, I don't care too much about the ADF working, I just want to disable whatever sensor is tripping this error message. Any ideas? I found this thread online, where a user has the same problem. But no resolution was reached there.

  Read the article

• lighttpd domains and url matching

  - by Manuel

  I'm trying to configure lighttpd so that: www.domain1.org/admin uses config1 any other URL on www.domain1.org uses config2 any url on www.domain2.org uses config2 So basically, domain1 and domain2 should use the same configuration except for when domain1 is accessed via an URL that starts with /admin I tried so far a number of variations, including this one: $HTTP["host"] =~ "domain1.org" { $HTTP["url"] =~ "^/admin" { // config1 alias.url = ("/media/admin" => "/usr/share...", "/static" => "/var/www/...") url.rewrite-once = ( "^(/media/admin.*)$" => "$1", "^(/static.*)$" => "$1", "^/favicon\.ico$" => "/media/favicon.ico", "^(/.*)$" => "/application.fcgi$1", ) server.document-root="/var/www/application" fastcgi.debug = 1 fastcgi.server = ( "/application.fcgi" => ( "main" => ( "socket" => "/var/www/application/application.sock", "check-local" => "disable", ) ), ) } else $HTTP["url"] !~ "^/admin" { // config2 } $HTTP["host"] !~ "domain1.org" { // config2 } But no matter what, accessing domain1.org/admin yields a 404. Is there anything that I am missing?

  Read the article

• Permanent solution to Win XP SP3 window animation removal

  - by epale85

  Hello everyone, May I know how I can get rid of the Window Animation (seen when you minimise or maximise a window) in Windows XP Service Pack 3 Permanently?? I have tried the following two solutions: I went to the control panel---adjust visual effects--- then unchecked the "Animate windows when maximising and minimising" option. 2.I have tried using windows powertoys tweakUI to disable the animation. 3.I even tried this: Turn Off Window Animation You can shut off the animation displayed when you minimize and maximize Windows. 1. Open RegEdit 2. Go to HKEY_CURRENT_USER\Control panel \Desktop\ WindowMetrics 3. Create a new string value "MinAnimate". 4. Set the value data of 0 for Off or 1 for On But still no help The Big Problem is that the window animation will disappear for a while but returns again some time later. When I navigate back to the "adjust visual effects" window, the checkbox for "Animate windows when maximising and minimising" is checked again. Thank you very much

  Read the article

• Dedicated Mouse and Keyboard on Virtual Box VM

  - by Myersguy

  To all super users, Currently I am trying to run virtual box on my second monitor, with a dedicated mouse and keyboard. However, doing so has not proven easy. There has been times where the mouse works, but not the keyboard, vice versa, or nothing works at all. The biggest problem I am running into is this: When enabling the USB mouse and keyboard from the VM, I get an error: 'USB Device is busy with a previous request.' The only thing that is using second mouse and keyboard, however, is Windows. The other error I have received stated that the VM was unable to create a proxy for the device. Additionally, the VM occasionally will disable the secondary keyboard entirely, requiring me to unplug and replug it into my PC to re-enable it again. Keyboard auto-capture is disabled, and while a solution I was reading online stated to turn off mouse integration, that option is grayed out on my machine. Any help would be appreciated. Thanks. /firstquestion.

  Read the article

• Allied Telesis router: IP filtering for the LOCAL interface

  - by syneticon-dj

  Given an Allied Telesis router with an AlliedWare OS (2.9.1) I would like to disable access to all management services of the router except for a number of subnets (or alternatively have what is a "management VLAN" with other manufacturers' switch and router models). What I have tried so far: creating a new VLAN and an appropriate IP interface, setting the LOCAL IP into this subnet, creating an IP filter for the IP interface and specifying my exclusion subnets: it simply does not work as intended as I can access the LOCAL IP set from any of the other VLAN interfaces - the traffic is apparently not going through my defined filter set at all creating a new IP filter set and binding it to the LOCAL IP interface: this seems not to affect any kind of traffic at all, the counters for the filter set remain at zero packets setting the Remote Security Officer Level IP address range: this only restricts the ability for a user with the Security Officer privilege level to log in from any but the specified address ranges / subnets. Unfortunately, it does not prevent service availability (and thus DoS capacity) or the ability to log in as a less privileged user (e.g. a "manager") calling technical support: unfortunately no solution so far What I have not tried: creating a filter set for each and every IP interface defined on the router and excluding access to the router's management IP: I would like to reduce the overhead induced by IP filters as the router already is CPU-constrained at times. Setting up filters for every IP interface would mean that each and every traffic packet would have to pass the filters, thus consuming CPU cycles. If by any means possible, I would like to find a different solution.

  Read the article

• certificate SSH login does not work on 22 but other port

  - by Hugo

  On my Red Hat server, the sshd will not accept my correct certificate login. However, If i start another sshd on another port, it works! (I assume the second sshd loads the same configruation files.) second sshd started with: sudo /usr/sbin/sshd -p 54321 -d #-d is optional and prints debug output ssh strange-host -p 22 -vvv prints: debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering public key: /home/me/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 528 bytes for a total of 2389 debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug2: we did not send a packet, disable method debug3: authmethod_lookup password ssh strange-host -p 54321 -vvv prints: debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering public key: /home/me/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 528 bytes for a total of 2389 debug1: Server accepts key: pkalg ssh-dss blen 433 debug2: input_userauth_pk_ok: SHA1 fp 0f:1c:df:27:f7:86:49:a8:47:7e:7f:f3:32:1c:7d:04:a3:73:a5:72 So the question is why the difference? I have thought of no way to get any helpful logging from the "standard" sshd to troubleshoot the problem.

  Read the article

• Power surge PC damage: How can I test all components of my PC without access to a second computer?

  - by Doug T.

  Ever since we had some crazy power surges last week my 64 bit Windows 7 PC has been acting strange. My USB network adapter disconnects from the wireless and can't detect the signal. I have to disable/reenable the adapter to detect it again. Also my wife has reported that the PC has rebooted a few times while I'm not sitting at it. Today I finally caught the reboot while I was using the PC. I got this blue screen of death. Stop Code 0x00000109: "Modification of system code or a critical data structure was detected." I followed the advice at the linked article and ran a memory test. I used memtest86 and its already found around 300,000 errors out of 8 gigs of ram. Now I'm worried -- what are the odds this is isolated to just my memory and not just a system wide problem? Isn't there a good chance that many other components are fried? More importantly, how can I test those other components? Are there tools similar to memtest I can use to test my motherboard/video card/power supply? If these are vender specific, is it typical for vendors to provide testing tools?

  Read the article

• pam_ldap.so before pam_unix.so? Is it ever possible?

  - by user1075993

  we have a couple of servers with PAM+LDAP. The configuration is standard (see http://arthurdejong.org/nss-pam-ldapd/setup or http://wiki.debian.org/LDAP/PAM). For example, /etc/pam.d/common-auth contains: auth sufficient pam_unix.so nullok_secure auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth requiered pam_deny.so And, of course, it works for both ldap and local users. But every login goes first to pam_unix.so, fails, and only then tries pam_ldap.so successfully. As a result, we have a well-known failure message for every single ldap user login: pam_unix(<some_service>:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=<some_host> user=<some_user> I have up to 60000 of such log messages per day and I want to change the configuration so, that PAM will try ldap authentication first, and only if it fails - try pam_unix.so (I think it can improve the i/o performance of the server). But if I change common-auth to the following: auth sufficient pam_ldap.so use_first_pass auth sufficient pam_unix.so nullok_secure auth requiered pam_deny.so Then I simply can't login anymore with local (non-ldap) user (e.g., via ssh). Does somebody knows the right configuration? Why Debian and nss-pam-ldapd have pam_unix.so at first by default? Is there really no way to change it? Thank you in advance. P.S. I don't want to disable logs, but want to set ldap authentication on the first place.

  Read the article

• Can't access YouTube

  - by Agentleader1

  I can not seem to connect to YouTube at all. If I connect directly to YouTube (youtube.com) I get this: And if I try to connect via video directly (youtube.com/watch?v=), I get this: Here's how this isn't a web issue: I have malware on my computer I believe. And the question here is, how do I get rid of it, or what possible issue could this be? I can verify this is not a website issue or wifi issue, I've tried to connect on another computer in my wifi, and it worked. It is the local machine issue. I've tried to get rid of malware at my best and also have tried to disable possible virus extensions. All can out as the same result: no help. Also, I am unable to find these hiding viruses. I used malware-bytes and Microsoft Security Essentials. Edit: This is OBVIOUSLY Windows. I am currently running on a laptop Windows 7 Home Premium 4gb ram 64-bit os Lifebook series manufactured by Fujitsu America, Inc. Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz nslookup youtube.com:

  Read the article

• Svchost.exe connecting to different IPs with remote port 445

  - by Coll911

  Im using Windows XP Professional SP2. Whenever I start my Windows, svchost.exe starts connecting to all the possible IPs on LAN like from 192.168.1.2 to 192.168.1.200. The local port ranges from 1000-1099 and the remote port being 445. After it's done with the local IPs, it starts connecting to other random IPs. I tried blocking connections to the port 445 using the local security polices but it didn't work. Is there any possible way I could prevent svchost from connecting to these IPs without involving any firewall installed? My PC slows down due to the load. I scanned my PC with MalwareBytes and found out it was infected with a worm, it's deleted now but still svchost is connecting to the IPs. I also found out that in my Windows Firewall settings, under Internet Control Message Protocol (ICMP), there's a tick on "allow incoming echo request" (usually disabled) which is locked and I can't disable it. Its description is as follows Messages sent to this computer will be repeated back to the sender. This is used for trouble shooting for e.g to ping a machine. Requests of this type are automatically allowed if TCP port 445 is enabled. Any solutions? I can't bear going with the reinstalling Windows phase again.

  Read the article

• Apache on CentOS 5.9 VM serves my optimized images corrupted (but my Mac doesn't)

  - by Robert K

  I'm using a Vagrant VM to mirror the client's environment as closely as I can. As part of our build process we do no optimization of assets early on; that comes as we're ready to take a site live. Needless to say, this issue is beginning to worry me as we need to take the site live very soon. I use ImageOptim to automate optimization of image assets, which runs a whole series of tools (Zopfli, PNGOUT, OptiPNG, AdvPNG, PNGCrush). I always set the optimizations to their maximum setting. After optimization, my PNGs start looking like this: What's weird is, if I serve the same file through my Mac's copy of Apache, not through Vagrant, the image loads fine. In fact, the only time it's ever corrupt like this is when the image is served from the Vagrant VM and its install of Drupal. All optimized JPEGs display only the first ~20% of the image. And PNGs, depending on the image, may show either a portion or the "progressive"-style corruption below. The browser itself makes no difference, the same browser will serve an uncorrupted image from my Mac's Apache instance and a corrupt image from the VM. When I disable all PNG optimizations except PNGCrush, and the removal of the PNG metadata, the image is served corrupted. I'm optimizing JPEG images with JPEGmini. The server is running CentOS 5.9, Apache 2.2.3-85, PHP 5.3.3, and Drupal 7. As best as I can tell the error lies somewhere within the VM, either with Apache or with (perhaps) the network stack. Seems like the tools that optimize the compression of the PNGs and JPEGs are what trigger this error. I've already determined that the .htaccess file isn't interfering with how the images load. What should I try to troubleshoot this?

  Read the article

• Does anyone know the touchpad disabling driver for Dell xps 14?

  - by rkar

  I accidentally deleted my Dell xps 14 touch pad disabling driver and I don't know where to find it and reinstall it. I have already tried Dell support and without luck (I don't want to install something that I don't know). Would anyone please send me the link to that driver To clarify: There is this Fn shortcut key used to disable/enable touch pad in Dell xps14 and when press it orange light on touch pad will lit and touch pad will stop working. But after deleting the driver that responsible for that function,it stopped working. My service center is almost 600 miles away and he said that he forgot to add it last time he fix my laptop. Since the internet connection at his place is slow,he can't send me from mail either.So can anyone send me the link for that driver. Since I don't really know about drivers it would be really nice if some one show me the driver name or link. Sorry,here is my laptop service tag "C37KWL1".I don't know how to find the specific driver for that function key.My dell has a short cut for disabling touchpad with picture on it along with the other multimedia short cut key with picture. since xps 15 and 17 have seperated touch key instead of on function keys mine have to choose function key or multimedia key through setting.To be honest my service center tech guy forgot to install it when he repair it and can't send me the file(which is about over 20mb or something according to him)for some reason.All i need is that particular file.

  Read the article

• Hyper-V VM's cannot access Host resources, and vice-versa

  - by Agent

  I have several Hyper-V vm's running on this Win2008 R2 Server box, and up until a reboot of the host server, all the VM's were able to access shared folders on the host. Now, they can't even ping the host server. From what I've seen, I need to setup an Internal only network through Virtual Network Manager in Hyper-V. I set this up, then tried to enable the Microsoft Virtual Network Switch Protocol option in this Internal Only NIC, but I get popups saying: Your current selection will also disable the following features: Microsoft virtual network switch protocol Which is absolutely stupid, considering the protocol is what I'm ticking the checkbox to Enable! As of now, on the host, I have 2 NICs: Physical - This NIC on the host machine does have the MVNS protocol enabled Virtual Network Adapter - Created through Hyper-V Virtual Network Manager as an External type of network. Trying to enable MVNS on this NIC also produces the error above. I've tried enabling Client for Microsoft Networks on the physical NIC for IPv6, but everytime I do that, all the VMs lose Internet connectivity and I cannot RDP into them. Anything else I can try?

  Read the article

• Can I select which folders the Photos live tile chooses from?

  - by nhinkle

  The built-in Photos app in Windows 8 has a live tile on the start screen that shows photos from your pictures library. It's a cool little visual, even if it's not particularly useful. The problem is that a lot of image files on my computer are not really photos per se -- I have a lot of screenshots, PNGs of technical drawings, graph images, etc. Those all look pretty awkward on the start screen. I look pretty awkward on the start screen too... sometimes photos like resume profile shots show up that I don't want to delete, but they're not really what I want to be staring at when I start my computer up. I'm looking for some way to configure which folders the Photos app should look in for images to display on the live tile. That way, I could point it to some directories of pretty scenic pictures I've taken, and not have to see graphs and my own mug. For the time being, I've just disabled the live tile (right click - disable live tile), but I would ultimately like to have this functionality, just with more control over it.

  Read the article

• Repeated installation of malicious software to do outbound DDOS attack [duplicate]

  - by user224294

  This question already has an answer here: How do I deal with a compromised server? 12 answers We have a Ubuntu Vitual Private Server hosted by a Canadian company. Out VPS was affected to do "outbound DDOS attack" as reported by server security team. There are 4 files in /boot looks like iptable, please note that the capital letter "I","L". VPS:/boot# ls -lha total 1.8M drwx------ 2 root root 4.0K Jun 3 09:25 . drwxr-xr-x 22 root root 4.0K Jun 3 09:25 .. -r----x--x 1 root root 1.1M Jun 3 09:25 .IptabLes -r----x--x 1 root root 706K Jun 3 09:23 .IptabLex -r----x--x 1 root root 33 Jun 3 09:25 IptabLes -r----x--x 1 root root 33 Jun 3 09:23 IptabLex We deleted them. But after a few hours, they appeared again and the attack resumed. We deleted them again. They resurfaced again. So on and so forth. So finally we have to disable our VPS. Please let us know how can we find the malicious script somewhere in the VPS, which can automatically install such attcking software? Thanks.

  Read the article

• SMF restarting service whenever there's output?

  - by Phillip Oldham

  I'm trying to add a custom service to SMF's configuration, which seems successful in that the service starts and there is a log file, but therein lies the problem; the service, on start-up, prints some logging messages to the stderr. It seems that SMF is seeing those messages and, believing them to be errors, restarts the service, giving up after a number of tries and leaving the service off. Here's part of the log output: [ Mar 30 14:59:54 Enabled. ] [ Mar 30 14:59:54 Executing start method ("java server.CustomServer"). ] Starting server... [ Mar 30 15:00:04 Method or service exit timed out. Killing contract 107. ] Running the server directly on the commandline is fine, and AFACS there are no errors being encountered during startup, other than the output. What would be the best way to manage this service with SMF? The logging is needed for diagnosing problems, and would be problematic to disable. Is it possible to configure this service to only restart if the service exists?

  Read the article

• How to stop Vista from auto changing video resolution?

  - by bialix

  I have new Acer Aspire Revo R3600 computer with Vista pre-installed. The computer has NVidia video adapter. While connecting 17" LCD monitor (LG L1742S) via VGA cable it works fine, and I can change the resolution of the display from max 1920*1024 down to some other value, and after reboot the settings are restored correctly. But when I'm connecting bigger full HD 1920*1080 display (LG E2250) via VGA cable then every boot I have the same problem: I see boot progress window, then I see MS logo, then I see welcome screen then I start to see desktop and suddenly monitor switch off and show me the message about unsupported frequency of input signal As I understand Vista tries to auto-change resolution and sets wrong parameters. I've tried to boot into safe mode and into low-resolution mode, every time I have the same problem: Vista boot-up and suddenly monitor stops working. I've tried to connect this monitor to notebook with Windows XP and has no problem to work with this display on its native resolution. How can I disable this display resolution auto-changer in Vista? Or maybe there is another workaround?

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >