Search Results

Search found 15438 results on 618 pages for 'static allocation'.

Page 176/618 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

  • XenServer VM's lose network settings

    - by Ash
    We deploy virtual machines using Citrix XenServer 6.0 for our clients. Two seperate clients experience the same issue: when a Server 2008 virtual machine is restarted, the static IP addresses (network address, subnet, gateway, primary DNS) don't appear to apply correctly as the IP's cannot be pinged, network services cannot be accessed etc. The issue is resolved by manually switching the network adapters to DHCP, then re-setting them to the original static IP's. While not a major issue, it's a pain when restarting servers due to Windows Updates, plus iSCSI drives need to be manually connected to Windows again via iSCSI Initiator. We have tried removed the network adapters from the virtual machine under XenCentre but without luck. Anyone experienced similar issues?

    Read the article

  • Access Bind9 DNS in Virtualbox on Host

    - by Philipp Melab
    I've set up a Ubuntu 10.04 Virtual Box with a Bind9 DNS server. The Box has a NAT Network connection for internet access and a host-only adapter for static ip connections from the host (OSX Lion). Thats the only way i managed to get internet and static ip inside the box, guess there is a better one ... The DNS works fine from inside the virtualbox, but not from the host. The http and ftp on the guest system is accessible via both addresses, so connection between host and guest are fine i guess. I tried to add both IP's as name servers. I'm completely new to Bind9 and DNS configuration. Anybody has a hint for me whats wrong? Or how i have to configure the DNS server?

    Read the article

  • Make Your Menu Item Highlighted

    - by Shaun
    When I was working on the TalentOn project (Promotion in MSDN Chinese) I was asked to implement a functionality that makes the top menu items highlighted when the currently viewing page was in that section. This might be a common scenario in the web application development I think.   Simple Example When thinking about the solution of the highlighted menu items the biggest problem would be how to define the sections (menu item) and the pages it belongs to rather than making the menu highlighted. With the ASP.NET MVC framework we can use the controller – action infrastructure for us to achieve it. Each controllers would have a related menu item on the master page normally. The menu item would be highlighted if any of the views under this controller are being shown. Some specific menu items would be highlighted of that action was invoked, for example the home page, the about page, etc. The check rule can be specified on-demand. For example I can define the action LogOn and Register of Account controller should make the Account menu item highlighted while the ChangePassword should make the Profile menu item highlighted. I’m going to use the HtmlHelper to render the highlight-able menu item. The key point is that I need to pass the predication to check whether the current view belongs to this menu item which means this menu item should be highlighted or not. Hence I need a delegate as its parameter. The simplest code would be like this. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using System.Web.Mvc.Html; 7:  8: namespace ShaunXu.Blogs.HighlighMenuItem 9: { 10: public static class HighlightMenuItemHelper 11: { 12: public static MvcHtmlString HighlightMenuItem(this HtmlHelper helper, 13: string text, string controllerName, string actionName, object routeData, object htmlAttributes, 14: string highlightText, object highlightHtmlAttributes, 15: Func<HtmlHelper, bool> highlightPredicate) 16: { 17: var shouldHighlight = highlightPredicate.Invoke(helper); 18: if (shouldHighlight) 19: { 20: return helper.ActionLink(string.IsNullOrWhiteSpace(highlightText) ? text : highlightText, 21: actionName, controllerName, routeData, highlightHtmlAttributes == null ? htmlAttributes : highlightHtmlAttributes); 22: } 23: else 24: { 25: return helper.ActionLink(text, actionName, controllerName, routeData, htmlAttributes); 26: } 27: } 28: } 29: } There are 3 groups of the parameters: the first group would be the same as the in-build ActionLink method parameters. It has the link text, controller name and action name, etc passed in so that I can render a valid linkage for the menu item. The second group would be more focus on the highlight link text and Html attributes. I will use them to render the highlight menu item. The third group, which contains one parameter, would be a predicate that tells me whether this menu item should be highlighted or not based on the user’s definition. And then I changed my master page of the sample MVC application. I let the Home and About menu highlighted only when the Index and About action are invoked. And I added a new menu named Account which should be highlighted for all actions/views under its Account controller. So my master would be like this. 1: <div id="menucontainer"> 2:  3: <ul id="menu"> 4: <li><% 1: : Html.HighlightMenuItem( 2: "Home", "Home", "Index", null, null, 3: "[Home]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Home" 5: && helper.ViewContext.RouteData.Values["action"].ToString() == "Index")%></li> 5:  6: <li><% 1: : Html.HighlightMenuItem( 2: "About", "Home", "About", null, null, 3: "[About]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Home" 5: && helper.ViewContext.RouteData.Values["action"].ToString() == "About")%></li> 7:  8: <li><% 1: : Html.HighlightMenuItem( 2: "Account", "Account", "LogOn", null, null, 3: "[Account]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Account")%></li> 9: 10: </ul> 11:  12: </div> Note: You need to add the import section for the namespace “ShaunXu.Blogs.HighlighMenuItem” to make the extension method I created below available. So let’s see the result. When the home page was shown the Home menu was highlighted since at this moment it was controller = Home and action = Index. And if I clicked the About menu you can see it turned highlighted as now the action was About. And if I navigated to the register page the Account menu was highlighted since it should be like that when any actions under the Account controller was invoked.   Fluently Language Till now it’s a fully example for the highlight menu item but not perfect yet. Since the most common scenario would be: highlighted when the action invoked, or highlighted when any action was invoked under this controller, we can created 2 shortcut method so for them so that normally the developer will be no need to specify the delegation. Another place we can improve would be, to make the method more user-friendly, or I should say developer-friendly. As you can see when we want to add a highlight menu item we need to specify 8 parameters and we need to remember what they mean. In fact we can make the method more “fluently” so that the developer can have the hints when using it by the Visual Studio IntelliSense. Below is the full code for it. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using System.Web.Mvc.Html; 7:  8: namespace Ethos.Xrm.HR 9: { 10: #region Helper 11:  12: public static class HighlightActionMenuHelper 13: { 14: public static IHighlightActionMenuProviderAfterCreated HighlightActionMenu(this HtmlHelper helper) 15: { 16: return new HighlightActionMenuProvider(helper); 17: } 18: } 19:  20: #endregion 21:  22: #region Interfaces 23:  24: public interface IHighlightActionMenuProviderAfterCreated 25: { 26: IHighlightActionMenuProviderAfterOn On(string actionName, string controllerName); 27: } 28:  29: public interface IHighlightActionMenuProviderAfterOn 30: { 31: IHighlightActionMenuProviderAfterWith With(string text, object routeData, object htmlAttributes); 32: } 33:  34: public interface IHighlightActionMenuProviderAfterWith 35: { 36: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhen(Func<HtmlHelper, bool> predicate); 37: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerMatch(); 38: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerAndActionMatch(); 39: } 40:  41: public interface IHighlightActionMenuProviderAfterHighlightWhen 42: { 43: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes, string highlightText); 44: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes); 45: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass, string highlightText); 46: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass); 47: } 48:  49: public interface IHighlightActionMenuProviderAfterApplyHighlightStyle 50: { 51: MvcHtmlString ToActionLink(); 52: } 53:  54: #endregion 55:  56: public class HighlightActionMenuProvider : 57: IHighlightActionMenuProviderAfterCreated, 58: IHighlightActionMenuProviderAfterOn, IHighlightActionMenuProviderAfterWith, 59: IHighlightActionMenuProviderAfterHighlightWhen, IHighlightActionMenuProviderAfterApplyHighlightStyle 60: { 61: private HtmlHelper _helper; 62:  63: private string _controllerName; 64: private string _actionName; 65: private string _text; 66: private object _routeData; 67: private object _htmlAttributes; 68:  69: private Func<HtmlHelper, bool> _highlightPredicate; 70:  71: private string _highlightText; 72: private object _highlightHtmlAttributes; 73:  74: public HighlightActionMenuProvider(HtmlHelper helper) 75: { 76: _helper = helper; 77: } 78:  79: public IHighlightActionMenuProviderAfterOn On(string actionName, string controllerName) 80: { 81: _actionName = actionName; 82: _controllerName = controllerName; 83: return this; 84: } 85:  86: public IHighlightActionMenuProviderAfterWith With(string text, object routeData, object htmlAttributes) 87: { 88: _text = text; 89: _routeData = routeData; 90: _htmlAttributes = htmlAttributes; 91: return this; 92: } 93:  94: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhen(Func<HtmlHelper, bool> predicate) 95: { 96: _highlightPredicate = predicate; 97: return this; 98: } 99:  100: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerMatch() 101: { 102: return HighlightWhen((helper) => 103: { 104: return helper.ViewContext.RouteData.Values["controller"].ToString().ToLower() == _controllerName.ToLower(); 105: }); 106: } 107:  108: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerAndActionMatch() 109: { 110: return HighlightWhen((helper) => 111: { 112: return helper.ViewContext.RouteData.Values["controller"].ToString().ToLower() == _controllerName.ToLower() && 113: helper.ViewContext.RouteData.Values["action"].ToString().ToLower() == _actionName.ToLower(); 114: }); 115: } 116:  117: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes, string highlightText) 118: { 119: _highlightText = highlightText; 120: _highlightHtmlAttributes = highlightHtmlAttributes; 121: return this; 122: } 123:  124: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes) 125: { 126: return ApplyHighlighStyle(highlightHtmlAttributes, _text); 127: } 128:  129: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass, string highlightText) 130: { 131: return ApplyHighlighStyle(new { @class = cssClass }, highlightText); 132: } 133:  134: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass) 135: { 136: return ApplyHighlighStyle(new { @class = cssClass }, _text); 137: } 138:  139: public MvcHtmlString ToActionLink() 140: { 141: if (_highlightPredicate.Invoke(_helper)) 142: { 143: // should be highlight 144: return _helper.ActionLink(_highlightText, _actionName, _controllerName, _routeData, _highlightHtmlAttributes); 145: } 146: else 147: { 148: // should not be highlight 149: return _helper.ActionLink(_text, _actionName, _controllerName, _routeData, _htmlAttributes); 150: } 151: } 152: } 153: } So in the master page when I need the highlight menu item I can “tell” the helper how it should be, just like this. 1: <li> 2: <% 1: : Html.HighlightActionMenu() 2: .On("Index", "Home") 3: .With(SiteMasterStrings.Home, null, null) 4: .HighlightWhenControllerMatch() 5: .ApplyHighlighStyle(new { style = "background:url(../../Content/Images/topmenu_bg.gif) repeat-x;text-decoration:none;color:#feffff;" }) 6: .ToActionLink() %> 3: </li> While I’m typing the code the IntelliSense will advise me that I need a highlight action menu, on the Index action of the Home controller, with the “Home” as its link text and no need the additional route data and Html attributes, and it should be highlighted when the controller was “Home”, and if it’s highlighted the style should be like this and finally render it to me. This is something we call “Fluently Language”. If you had been using Moq you will see that’s very development-friendly, document-ly and easy to read.   Summary In this post I demonstrated how to implement a highlight menu item in ASP.NET MVC by using its controller – action infrastructure. We can see the ASP.NET MVC helps us to organize our web application better. And then I also told a little bit more on the “Fluently Language” and showed how it will make our code better and easy to be used.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • How do I draw a single Triangle with XNA and fill it with a Texture?

    - by Deukalion
    I'm trying to wrap my head around: http://msdn.microsoft.com/en-us/library/bb196409.aspx I'm trying to create a method in XNA that renders a single Triangle, then later make a method that takes a list of Triangles and renders them also. But it isn't working. I'm not understanding what all the things does and there's not enough information. My methods: // Triangle is a struct with A, B, C (didn't include) A, B, C = Vector3 public static void Render(GraphicsDevice device, List<Triangle> triangles, Texture2D texture) { foreach (Triangle triangle in triangles) { Render(device, triangle, texture); } } public static void Render(GraphicsDevice device, Triangle triangle, Texture2D texture) { BasicEffect _effect = new BasicEffect(device); _effect.Texture = texture; _effect.VertexColorEnabled = true; VertexPositionColor[] _vertices = new VertexPositionColor[3]; _vertices[0].Position = triangle.A; _vertices[1].Position = triangle.B; _vertices[2].Position = triangle.B; foreach (var pass in _effect.CurrentTechnique.Passes) { pass.Apply(); device.DrawUserIndexedPrimitives<VertexPositionColor> ( PrimitiveType.TriangleList, _vertices, 0, _vertices.Length, new int[] { 0, 1, 2 }, // example has something similiar, no idea what this is 0, 3 // 3 = gives me an error, 1 = works but no results ); } }

    Read the article

  • Interesting sessions/tips from RMOUG

    - by jean-pierre.dijcks
    One of the sessions I was at at last week's RMOUG was a session on Temp Tablespace Groups. I had a look because I had no experience with this and it seemed to help with parallel processing and the allocation/usage of temp. You can read the excellent write-up at Kellyn Pedersen's blog - who did the session and all the work - here. So for all of those who may be seeing lot's of waits like enq: TS - Contention when you are doing hash joins and sorts, do have a look at the above blog post. I also had the chance to listen in at Stewart Bryson's session on Restartability (he had 3 R-s) where he gave very useful tips about how to deal with your data warehouse loads. Questions like archive log mode - should I or should I not were well covered. Flashback archives, also nice to hear about. Very nice talk, very interesting. Unfortunately he hasn't blogged about it yes, so no pointers to that one. Got to see a couple of other interesting sessions, and as conferences go got to meet some interesting Oracle folks from the region. As usual RMOUG was useful and fun. Off to the drawing boards to design next year's session!

    Read the article

  • Mod_rewrite with UTF-8 accent, multiviews , .htaccess

    - by GuruJR
    Problem: with Mod_rewrite, multiview & Apache config Introduction: The website is in french and i had problem with unicode encoding and mod_rewrite within php wihtout multiviews Old server was not handling utf8 correctly (somewhere between PHP, apache mod rewrite or mysql) Updated Server to Ubuntu 11.04 , the process was destructive lost all files in var/www/ (the site was mainly 2 files index.php & static.php) lost the site specific .Htaccess file lost MySQL dbs lost old apache.conf What i have done so far: What works: Setup GNutls for SSL, Listen 443 = port.conf Created 2 Vhosts in one file for :80 and :443 = website.conf Enforce SSL = Redirecting :80 to :443 with a mod_rewrite redirect Tried to set utf-8 everywhere.. Set charset and collation , db connection , mb_settings , names utf-8 and utf8_unicode_ci, everywhere (php,mysql,apache) to be sure to serve files as UTF-8 i enabled multiview renamed index.php.utf8.fr and static.php.utf8.fr With multiview enabled, Multibytes Accents in URL works SSL TLS 1.0 What dont work: With multiview enabled , mod_rewrite works for only one of my rewriterules With multiview Disabled, i loose access to the document root as "Forbidden" With multiview Disabled, i loose Multibytes (single charater accent) The Apache Default server is full of settings. (what can i safely remove ?) these are my configuration files so far :80 Vhost file (this one work you can use this to force redirect to https) RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} LanguagePriority fr :443 Vhost file (GnuTls is working) DocumentRoot /var/www/x ServerName example.com ServerAlias www.example.com <Directory "/var/www/x"> allow from all Options FollowSymLinks +MultiViews AddLanguage fr .fr AddCharset UTF-8 .utf8 LanguagePriority fr </Directory> GnuTLSEnable on GnuTLSPriorities SECURE:+VERS-TLS1.1:+AES-256-CBC:+RSA:+SHA1:+COMP-NULL GnuTLSCertificateFile /path/to/certificate.crt GnuTLSKeyFile /path/to/certificate.key <Directory "/var/www/x/base"> </Directory> Basic .htaccess file AddDefaultCharset utf-8 Options FollowSymLinks +MultiViews RewriteEngine on RewriteRule ^api/$ /index.php.utf8.fr?v=4 [L,NC,R] RewriteRule ^contrib/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^coop/$ /index.php.utf8.fr?v=3 [L,NC,R] RewriteRule ^crowd/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^([^/]*)/([^/]*)$ /static.php.utf8.fr?VALUEONE=$2&VALUETWO=$1 [L] So my quesiton is whats wrong , what do i have missing is there extra settings that i need to kill from the apache default . in order to be sure all parts are using utf-8 at all time, and that my mod_rewrite rules work with accent Thank you all in advance for your help, I will follow this question closely , to add any needed information.

    Read the article

  • Collection RemoveAll Extension Method

    - by João Angelo
    I had previously posted a RemoveAll extension method for the Dictionary<K,V> class, now it’s time to have one for the Collection<T> class. The signature is the same as in the corresponding method already available in List<T> and the implementation relies on the RemoveAt method to perform the actual removal of each element. Finally, here’s the code: public static class CollectionExtensions { /// <summary> /// Removes from the target collection all elements that match the specified predicate. /// </summary> /// <typeparam name="T">The type of elements in the target collection.</typeparam> /// <param name="collection">The target collection.</param> /// <param name="match">The predicate used to match elements.</param> /// <exception cref="ArgumentNullException"> /// The target collection is a null reference. /// <br />-or-<br /> /// The match predicate is a null reference. /// </exception> /// <returns>Returns the number of elements removed.</returns> public static int RemoveAll<T>(this Collection<T> collection, Predicate<T> match) { if (collection == null) throw new ArgumentNullException("collection"); if (match == null) throw new ArgumentNullException("match"); int count = 0; for (int i = collection.Count - 1; i >= 0; i--) { if (match(collection[i])) { collection.RemoveAt(i); count++; } } return count; } }

    Read the article

  • Animation API vs frame animation

    - by Max
    I'm pretty far down the road in my game right now, closing in on the end. And I'm adding little tweaks here and there. I used custom frame animation of a single image with many versions of my sprite on it, and controlled which part of the image to show using rectangles. But I'm starting to think that maybe I should've used the Animation API that comes with android instead. Will this effect my performance in a negative way? Can I still use rectangles to draw my bitmap? Could I add effects from the Animation API to my current frame-controlled animation? like the fadeout-effect etc? this would mean I wont have to change my current code. I want some of my animations to fade out, and just noticed that using the Animation API makes things alot easier. But needless to say, I would prefer not having to change all my animation-code. I'm bad at explaining, so Ill show a bit of how I do my animation: private static final int BMP_ROWS = 1; //I use top-view so only need my sprite to have 1 direction private static final int BMP_COLUMNS = 3; public void update(GameControls controls) { if (sprite.isMoving) { currentFrame = ++currentFrame % BMP_COLUMNS; } else { this.setFrame(1); } } public void draw(Canvas canvas, int x, int y, float angle) { this.x=x; this.y=y; canvas.save(); canvas.rotate(angle , x + width / 2, y + height / 2); int srcX = currentFrame * width; int srcY = 0 * height; Rect src = new Rect(srcX, srcY, srcX + width, srcY + height); Rect dst = new Rect(x, y, x + width, y + height); canvas.drawBitmap(bitmap, src, dst, null); canvas.restore(); }

    Read the article

  • Cannot boot into ubuntu 12.10

    - by sriram
    Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

    Read the article

  • Memeory Leak in Windows Page file when calling a shell command

    - by Arno
    I have an issue on our Windows 2003 x64 Build Server when invoking shell commands from a script. Each call causes a "memory leak" in the page file so it grows quite rapidly until it reaches the maximum and the machine stops working. I can reproduce the problem very nicely by running a perl script like for ($count=1; $count<5000; $count++) { system "echo huhu"; } It is independent of he scripting language as the same happens with lua: for i=1,5000 do os.execute("echo huhu") end I found somebody describing the same issue with php at http://www.issociate.de/board/post/454835/Memory_leak_occurs_when_exec%28%29_function_is_used_on_Windows_platform.html His solution: Firewall/Virus Scanner does not apply, neither are running on the machine. We can also reproduce the issue on other Developer Machines running XP 64, but not on XP 32 Bit. The guilty guy for the allocation is C:\WINDOWS\System32\svchost.exe -k netsvcs which runs all the basic Windows services. Does anybody know the issue and how to resolve it ?

    Read the article

  • RPi and Java Embedded GPIO: Java code to blink more LEDs

    - by hinkmond
    Now, it's time to blink the other GPIO ports with the other LEDs connected to them. This is easy using Java Embedded, since the Java programming language is powerful and flexible. Embedded developers are not used to this, since the C programming language is more popular but less easy to develop in. We just need to use a dynamic Java String array to map to the pinouts of the GPIO port names from the previous diagram posted. This way we can address each "channel" with an index into that String array. static String[] GpioChannels = { "0", "1", "4", "17", "21", "22", "10", "9" }; With this new dynamic array, we can streamline the main() of this Java program to activate all the ports. /** * @param args the command line arguments */ public static void main(String[] args) { FileWriter[] commandChannels; try { /*** Init GPIO port for output ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to port input/output control FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for output directionFile.write(GPIO_OUT); directionFile.flush(); } And, then simply add array code to where we blink the LED to make it blink all the LEDS on and off at once. /*** Send commands to GPIO port ***/ commandChannels = new FileWriter[GpioChannels.length]; for (int channum=0; channum It's easier than falling off a log... or at least easier than C programming. Hinkmond

    Read the article

  • Debugging Windows Service Timeout Error 1053

    - by Joe Mayo
    If you ever receive an Error 1053 for a timeout when starting a Windows Service you've written, the underlying problem might not have anything to do with a timeout.  Here's the error so you can compare it to what you're seeing: --------------------------- Services --------------------------- Windows could not start the Service1 service on Local Computer.   Error 1053: The service did not respond to the start or control request in a timely fashion. --------------------------- OK   --------------------------- Searching the Web for a solution to this error in your Windows Service will result in a lot of wasted time and advice that won't help.  Sometimes you might get lucky if your problem is exactly the same as someone else's, but this isn't always the case.  One of the solutions you'll see has to do with a known error on Windows Server 2003 that's fixed by a patch to the .NET Framework 1.1, which won't work.  As I write this blog post, I'm using the .NET Framework 4.0, which is a tad bit past that timeframe. Most likely, the basic problem is that your service is throwing an exception that you aren't handling.  To debug this, wrap your service initialization code in a try/catch block and log the exception, as shown below: using System; using System.Diagnostics; using System.ServiceProcess; namespace WindowsService { static class Program { static void Main() { try { ServiceBase[] ServicesToRun; ServicesToRun = new ServiceBase[] { new Service1() }; ServiceBase.Run(ServicesToRun); } catch (Exception ex) { EventLog.WriteEntry("Application", ex.ToString(), EventLogEntryType.Error); } } } } After you uninstall the old service, redeploy the service with modifications, and receive the same error message as above; look in the Event Viewer/Application logs.  You'll see what the real problem is, which is the underlying reason for the timeout. Joe

    Read the article

  • Can't Start ISC DHCP IPv6 Server

    - by MrDaniel
    Trying to enable the ISC DHCP server for just IPv6 on Ubuntu 12.04 LTS. I have downloaded and installed the DHCP server via the following command: $ sudo apt-get install isc-dhcp-server Then I have followed the instructions in the following resources, Ubuntu Wiki DHCPv6, SixXS - Configuring ISC DHCPv6 Server and Linux IPv6 HOWTO - Configuration of the ISC DHCP server for IPv6 . So from review all those resources it seems like I need to: set a static IPv6 address for the Interface I want to run the DHCPv6 server from that is part of the IPv6 network subnet outside the DHCP range. Edit the /etc/dhcp/dhcpd6.conf file to configure the DHCPv6 range etc. Create the /var/lib/dhcp/dhcpd6.leases Manually start the DHCPv6 server. Setting the Static IP for eth0 $ sudo ifconfig eth0 inet6 add 2001:db8:0:1::128/64 My dhcpd6.conf default-lease-time 600; max-lease-time 7200; log-facility local7; subnet6 2001:db8:0:1::/64 { #Range for clients range6 2001:db8:0:1::129 2001:db8:0:1::254; } Created the dhcpd6.leases file As indicated in the dhcpd.leases man page. $ touch /var/lib/dhcp/dhcpd6.leases #Tried with sudo as well Manually starting the DHCPv6 server. Attempted to start the server using the following command: $ sudo dhcp -6 -f -cf /etc/dhcp/dhcpd6.conf eth0 The problem, the DHCP will not start, with an append error for the dhcpd6.leases file as indicated below when running the manual start command noted above. Can't open /var/lib/dhcp/dhcpd6.leases for append. Any ideas what I might be missing?

    Read the article

  • Silverstripe: How can I disable comments?

    - by SamIAm
    My client site is built in Silverstripe, there is a news page, and it allows people to leave comments. Unfortunately we've got loads of spam emails. I'm new to this, is there any way we can disable the comment field by default? How do I do it? Alternatively is there easy way for me to install a spam protection? Update - Because this is someone else's code, I just realised that they have some sort of spam protection already, so we are trying to disable comments now. I have manage to set no comment as default by changing file BlogEntry.php static $defaults = array( "ProvideComments" => true, 'ShowInMenus' => false ); to static $defaults = array( "ProvideComments" => false, //changed 'ShowInMenus' => false ); Am I on the right track to disable comments by default? Also how can I stop on the news page showing xxx comments link? eg Test Posted by Admin on 21 June 2011 | 3 Comments Tags: P This is a test.... 3 comments | Read the full post

    Read the article

  • Slow Starting DHCP Client Service - HP Thin Clients

    - by Ryan
    We have recently began adding XPe thin clients to our domain in preperation for a new citrix environment. One thing that has been picked up on in testing is that they appear slow to boot. The issue manifest's it's self as the classic "Applying Computer Settings..." screen we are all used to seeing. After digging into the issue it appears the DHCP Client service is taking some time to load on boot, this varies but I would estimate it can take around 1 minute in some cases. I've eliminated the classic issues, DHCP is responding correctly and in quick time. DNS is not the cause and GPO's are applying promptly. A simple workaround is to assign the client a static IP which work's great so the TCP/IP servies are obviously firing up quickly, just not DHCP Client. Does anyone have any idea's on how I may be able to improve the service start time? Keen to find a better solution before I get my arm twisted into setting up 250 thin clients with static addressing!

    Read the article

  • How to backup and restore ESXi 4 settings?

    - by Arek
    How can I backup all settings of free VMWare ESXi 4? I configured the host - VMs, Storage, Networking, Resource Allocation and all other settings available in vSphere Client. It consumed quite a lot of time, but works pretty well. Now I want to backup all the settings "just in case" to easily reinstall ESXi 4 if something goes really wrong. I don't ask "how to backup VMs" (so please don't point me to Ghetto-VCB script). I need to backup and restore just ESXi4 host's settings.

    Read the article

  • How do you set up DNS in Window Server 2008 in a Hyper-V environment?

    - by Nathan DeWitt
    I have a laptop running Server 2008 and Hyper-V. I have created a virtual machine that is also running Server 2008, that I used dcpromo to create as a domain controller. I disabled IPv6 because I had no idea how to enter a default address, and I just wanted to make a standalone MOSS dev environment. I have tried every combination of creating a virtual network on the host and then connecting to that in the VM, but I can't get the VM to communicate with the host and vice versa. No pinging, no copy and paste, nothing. Thanks. To update: My VM (which is its own DC) currently does not have a static IP. When I set the IP to static, I could not find anything that would let it talk to the host machine.

    Read the article

  • Is there a name for the Builder Pattern where the Builder is implemented via interfaces so certain parameters are required?

    - by Zipper
    So we implemented the builder pattern for most of our domain to help in understandability of what actually being passed to a constructor, and for the normal advantages that a builder gives. The one twist was that we exposed the builder through interfaces so we could chain required functions and unrequired functions to make sure that the correct parameters were passed. I was curious if there was an existing pattern like this. Example below: public class Foo { private int someThing; private int someThing2; private DateTime someThing3; private Foo(Builder builder) { this.someThing = builder.someThing; this.someThing2 = builder.someThing2; this.someThing3 = builder.someThing3; } public static RequiredSomething getBuilder() { return new Builder(); } public interface RequiredSomething { public RequiredDateTime withSomething (int value); } public interface RequiredDateTime { public OptionalParamters withDateTime (DateTime value); } public interface OptionalParamters { public OptionalParamters withSeomthing2 (int value); public Foo Build ();} public static class Builder implements RequiredSomething, RequiredDateTime, OptionalParamters { private int someThing; private int someThing2; private DateTime someThing3; public RequiredDateTime withSomething (int value) {someThing = value; return this;} public OptionalParamters withDateTime (int value) {someThing = value; return this;} public OptionalParamters withSeomthing2 (int value) {someThing = value; return this;} public Foo build(){return new Foo(this);} } } Example of how it's called: Foo foo = Foo.getBuilder().withSomething(1).withDateTime(DateTime.now()).build(); Foo foo2 = Foo.getBuilder().withSomething(1).withDateTime(DateTime.now()).withSomething2(3).build();

    Read the article

  • Is this a dual monitor reset bug?

    - by Tentresh
    My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

    Read the article

  • Auto-hydrate your objects with ADO.NET

    - by Jake Rutherford
    Recently while writing the monotonous code for pulling data out of a DataReader to hydrate some objects in an application I suddenly wondered "is this really necessary?" You've probably asked yourself the same question, and many of you have: - Used a code generator - Used a ORM such as Entity Framework - Wrote the code anyway because you like busy work     In most of the cases I've dealt with when making a call to a stored procedure the column names match up with the properties of the object I am hydrating. Sure that isn't always the case, but most of the time it's 1 to 1 mapping.  Given that fact I whipped up the following method of hydrating my objects without having write all of the code. First I'll show the code, and then explain what it is doing.      /// <summary>     /// Abstract base class for all Shared objects.     /// </summary>     /// <typeparam name="T"></typeparam>     [Serializable, DataContract(Name = "{0}SharedBase")]     public abstract class SharedBase<T> where T : SharedBase<T>     {         private static List<PropertyInfo> cachedProperties;         /// <summary>         /// Hydrates derived class with values from record.         /// </summary>         /// <param name="dataRecord"></param>         /// <param name="instance"></param>         public static void Hydrate(IDataRecord dataRecord, T instance)         {             var instanceType = instance.GetType();                         //Caching properties to avoid repeated calls to GetProperties.             //Noticable performance gains when processing same types repeatedly.             if (cachedProperties == null)             {                 cachedProperties = instanceType.GetProperties().ToList();             }                         foreach (var property in cachedProperties)             {                 if (!dataRecord.ColumnExists(property.Name)) continue;                 var ordinal = dataRecord.GetOrdinal(property.Name);                 var isNullable = property.PropertyType.IsGenericType &&                                  property.PropertyType.GetGenericTypeDefinition() == typeof (Nullable<>);                 var isNull = dataRecord.IsDBNull(ordinal);                 var propertyType = property.PropertyType;                 if (isNullable)                 {                     if (!string.IsNullOrEmpty(propertyType.FullName))                     {                         var nullableType = Type.GetType(propertyType.FullName);                         propertyType = nullableType != null ? nullableType.GetGenericArguments()[0] : propertyType;                     }                 }                 switch (Type.GetTypeCode(propertyType))                 {                     case TypeCode.Int32:                         property.SetValue(instance,                                           (isNullable && isNull) ? (int?) null : dataRecord.GetInt32(ordinal), null);                         break;                     case TypeCode.Double:                         property.SetValue(instance,                                           (isNullable && isNull) ? (double?) null : dataRecord.GetDouble(ordinal),                                           null);                         break;                     case TypeCode.Boolean:                         property.SetValue(instance,                                           (isNullable && isNull) ? (bool?) null : dataRecord.GetBoolean(ordinal),                                           null);                         break;                     case TypeCode.String:                         property.SetValue(instance, (isNullable && isNull) ? null : isNull ? null : dataRecord.GetString(ordinal),                                           null);                         break;                     case TypeCode.Int16:                         property.SetValue(instance,                                           (isNullable && isNull) ? (int?) null : dataRecord.GetInt16(ordinal), null);                         break;                     case TypeCode.DateTime:                         property.SetValue(instance,                                           (isNullable && isNull)                                               ? (DateTime?) null                                               : dataRecord.GetDateTime(ordinal), null);                         break;                 }             }         }     }   Here is a class which utilizes the above: [Serializable] [DataContract] public class foo : SharedBase<foo> {     [DataMember]     public int? ID { get; set; }     [DataMember]     public string Name { get; set; }     [DataMember]     public string Description { get; set; }     [DataMember]     public string Subject { get; set; }     [DataMember]     public string Body { get; set; }            public foo(IDataRecord record)     {         Hydrate(record, this);                }     public foo() {} }   Explanation: - Class foo inherits from SharedBase specifying itself as the type. (NOTE SharedBase is abstract here in the event we want to provide additional methods which could be overridden by the instance class) public class foo : SharedBase<foo> - One of the foo class constructors accepts a data record which then calls the Hydrate method on SharedBase passing in the record and itself. public foo(IDataRecord record) {      Hydrate(record, this); } - Hydrate method on SharedBase will use reflection on the object passed in to determine its properties. At the same time, it will effectively cache these properties to avoid repeated expensive reflection calls public static void Hydrate(IDataRecord dataRecord, T instance) {      var instanceType = instance.GetType();      //Caching properties to avoid repeated calls to GetProperties.      //Noticable performance gains when processing same types repeatedly.      if (cachedProperties == null)      {           cachedProperties = instanceType.GetProperties().ToList();      } . . . - Hydrate method on SharedBase will iterate each property on the object and determine if a column with matching name exists in data record foreach (var property in cachedProperties) {      if (!dataRecord.ColumnExists(property.Name)) continue;      var ordinal = dataRecord.GetOrdinal(property.Name); . . . NOTE: ColumnExists is an extension method I put on IDataRecord which I’ll include at the end of this post. - Hydrate method will determine if the property is nullable and whether the value in the corresponding column of the data record has a null value var isNullable = property.PropertyType.IsGenericType && property.PropertyType.GetGenericTypeDefinition() == typeof (Nullable<>); var isNull = dataRecord.IsDBNull(ordinal); var propertyType = property.PropertyType; . . .  - If Hydrate method determines the property is nullable it will determine the underlying type and set propertyType accordingly - Hydrate method will set the value of the property based upon the propertyType   That’s it!!!   The magic here is in a few places. First, you may have noticed the following: public abstract class SharedBase<T> where T : SharedBase<T> This says that SharedBase can be created with any type and that for each type it will have it’s own instance. This is important because of the static members within SharedBase. We want this behavior because we are caching the properties for each type. If we did not handle things in this way only 1 type could be cached at a time, or, we’d need to create a collection that allows us to cache the properties for each type = not very elegant.   Second, in the constructor for foo you may have noticed this (literally): public foo(IDataRecord record) {      Hydrate(record, this); } I wanted the code for auto-hydrating to be as simple as possible. At first I wasn’t quite sure how I could call Hydrate on SharedBase within an instance of the class and pass in the instance itself. Fortunately simply passing in “this” does the trick. I wasn’t sure it would work until I tried it out, and fortunately it did.   So, to actually use this feature when utilizing ADO.NET you’d do something like the following:        public List<foo> GetFoo(int? fooId)         {             List<foo> fooList;             const string uspName = "usp_GetFoo";             using (var conn = new SqlConnection(_dbConnection))             using (var cmd = new SqlCommand(uspName, conn))             {                 cmd.CommandType = CommandType.StoredProcedure;                 cmd.Parameters.Add(new SqlParameter("@FooID", SqlDbType.Int)                                        {Direction = ParameterDirection.Input, Value = fooId});                 conn.Open();                 using (var dr = cmd.ExecuteReader())                 {                     fooList= (from row in dr.Cast<DbDataRecord>()                                             select                                                 new foo(row)                                            ).ToList();                 }             }             return fooList;         }   Nice! Instead of having line after line manually assigning values from data record to an object you simply create a new instance and pass in the data record. Note that there are certainly instances where columns returned from stored procedure do not always match up with property names. In this scenario you can still use the above method and simply do your manual assignments afterward.

    Read the article

  • Xml Serialization and the [Obsolete] Attribute

    - by PSteele
    I learned something new today: Starting with .NET 3.5, the XmlSerializer no longer serializes properties that are marked with the Obsolete attribute.  I can’t say that I really agree with this.  Marking something Obsolete is supposed to be something for a developer to deal with in source code.  Once an object is serialized to XML, it becomes data.  I think using the Obsolete attribute as both a compiler flag as well as controlling XML serialization is a bad idea. In this post, I’ll show you how I ran into this and how I got around it. The Setup Let’s start with some make-believe code to demonstrate the issue.  We have a simple data class for storing some information.  We use XML serialization to read and write the data: public class MyData { public int Age { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public List<String> Hobbies { get; set; }   public MyData() { this.Hobbies = new List<string>(); } } Now a few simple lines of code to serialize it to XML: static void Main(string[] args) { var data = new MyData {    FirstName = "Zachary", LastName = "Smith", Age = 50, Hobbies = {"Mischief", "Sabotage"}, }; var serializer = new XmlSerializer(typeof (MyData)); serializer.Serialize(Console.Out, data); Console.ReadKey(); } And this is what we see on the console: <?xml version="1.0" encoding="IBM437"?> <MyData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Age>50</Age> <FirstName>Zachary</FirstName> <LastName>Smith</LastName> <Hobbies> <string>Mischief</string> <string>Sabotage</string> </Hobbies> </MyData>   The Change So we decided to track the hobbies as a list of strings.  As always, things change and we have more information we need to store per-hobby.  We create a custom “Hobby” object, add a List<Hobby> to our MyData class and we obsolete the old “Hobbies” list to let developers know they shouldn’t use it going forward: public class Hobby { public string Name { get; set; } public int Frequency { get; set; } public int TimesCaught { get; set; }   public override string ToString() { return this.Name; } } public class MyData { public int Age { get; set; } public string FirstName { get; set; } public string LastName { get; set; } [Obsolete("Use HobbyData collection instead.")] public List<String> Hobbies { get; set; } public List<Hobby> HobbyData { get; set; }   public MyData() { this.Hobbies = new List<string>(); this.HobbyData = new List<Hobby>(); } } Here’s the kicker: This serialization is done in another application.  The consumers of the XML will be older clients (clients that expect only a “Hobbies” collection) as well as newer clients (that support the new “HobbyData” collection).  This really shouldn’t be a problem – the obsolete attribute is metadata for .NET compilers.  Unfortunately, the XmlSerializer also looks at the compiler attribute to determine what items to serialize/deserialize.  Here’s an example of our problem: static void Main(string[] args) { var xml = @"<?xml version=""1.0"" encoding=""IBM437""?> <MyData xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""> <Age>50</Age> <FirstName>Zachary</FirstName> <LastName>Smith</LastName> <Hobbies> <string>Mischief</string> <string>Sabotage</string> </Hobbies> </MyData>"; var serializer = new XmlSerializer(typeof(MyData)); var stream = new StringReader(xml); var data = (MyData) serializer.Deserialize(stream);   if( data.Hobbies.Count != 2) { throw new ApplicationException("Hobbies did not deserialize properly"); } } If you run the code above, you’ll hit the exception.  Even though the XML contains a “<Hobbies>” node, the obsolete attribute prevents the node from being processed.  This will break old clients that use the new library, but don’t yet access the HobbyData collection. The Fix This fix (in this case), isn’t too painful.  The XmlSerializer exposes events for times when it runs into items (Elements, Attributes, Nodes, etc…) it doesn’t know what to do with.  We can hook in to those events and check and see if we’re getting something that we want to support (like our “Hobbies” node). Here’s a way to read in the old XML data with full support of the new data structure (and keeping the Hobbies collection marked as obsolete): static void Main(string[] args) { var xml = @"<?xml version=""1.0"" encoding=""IBM437""?> <MyData xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""> <Age>50</Age> <FirstName>Zachary</FirstName> <LastName>Smith</LastName> <Hobbies> <string>Mischief</string> <string>Sabotage</string> </Hobbies> </MyData>"; var serializer = new XmlSerializer(typeof(MyData)); serializer.UnknownElement += serializer_UnknownElement; var stream = new StringReader(xml); var data = (MyData)serializer.Deserialize(stream);   if (data.Hobbies.Count != 2) { throw new ApplicationException("Hobbies did not deserialize properly"); } }   static void serializer_UnknownElement(object sender, XmlElementEventArgs e) { if( e.Element.Name != "Hobbies") { return; }   var target = (MyData) e.ObjectBeingDeserialized; foreach(XmlElement hobby in e.Element.ChildNodes) { target.Hobbies.Add(hobby.InnerText); target.HobbyData.Add(new Hobby{Name = hobby.InnerText}); } } As you can see, we hook in to the “UnknownElement” event.  Once we determine it’s our “Hobbies” node, we deserialize it ourselves – as well as populating the new HobbyData collection.  In this case, we have a fairly simple solution to a small change in XML layout.  If you make more extensive changes, it would probably be easier to do some custom serialization to support older data. A sample project with all of this code is available from my repository on bitbucket. Technorati Tags: XmlSerializer,Obsolete,.NET

    Read the article

  • Top 25 security issues for developers of web sites

    - by BizTalk Visionary
    Sourced from: CWE This is a brief listing of the Top 25 items, using the general ranking. NOTE: 16 other weaknesses were considered for inclusion in the Top 25, but their general scores were not high enough. They are listed in the On the Cusp focus profile. Rank Score ID Name [1] 346 CWE-79 Failure to Preserve Web Page Structure ('Cross-site Scripting') [2] 330 CWE-89 Improper Sanitization of Special Elements used in an SQL Command ('SQL Injection') [3] 273 CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') [4] 261 CWE-352 Cross-Site Request Forgery (CSRF) [5] 219 CWE-285 Improper Access Control (Authorization) [6] 202 CWE-807 Reliance on Untrusted Inputs in a Security Decision [7] 197 CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') [8] 194 CWE-434 Unrestricted Upload of File with Dangerous Type [9] 188 CWE-78 Improper Sanitization of Special Elements used in an OS Command ('OS Command Injection') [10] 188 CWE-311 Missing Encryption of Sensitive Data [11] 176 CWE-798 Use of Hard-coded Credentials [12] 158 CWE-805 Buffer Access with Incorrect Length Value [13] 157 CWE-98 Improper Control of Filename for Include/Require Statement in PHP Program ('PHP File Inclusion') [14] 156 CWE-129 Improper Validation of Array Index [15] 155 CWE-754 Improper Check for Unusual or Exceptional Conditions [16] 154 CWE-209 Information Exposure Through an Error Message [17] 154 CWE-190 Integer Overflow or Wraparound [18] 153 CWE-131 Incorrect Calculation of Buffer Size [19] 147 CWE-306 Missing Authentication for Critical Function [20] 146 CWE-494 Download of Code Without Integrity Check [21] 145 CWE-732 Incorrect Permission Assignment for Critical Resource [22] 145 CWE-770 Allocation of Resources Without Limits or Throttling [23] 142 CWE-601 URL Redirection to Untrusted Site ('Open Redirect') [24] 141 CWE-327 Use of a Broken or Risky Cryptographic Algorithm [25] 138 CWE-362 Race Condition Cross-site scripting and SQL injection are the 1-2 punch of security weaknesses in 2010. Even when a software package doesn't primarily run on the web, there's a good chance that it has a web-based management interface or HTML-based output formats that allow cross-site scripting. For data-rich software applications, SQL injection is the means to steal the keys to the kingdom. The classic buffer overflow comes in third, while more complex buffer overflow variants are sprinkled in the rest of the Top 25.

    Read the article

  • Isn't NAT a MUST when a LAN uses rfc 1918 private IPs?

    - by aks
    Isn't NAT a MUST when a LAN uses rfc 1918 private IPs? Can an organization assign its hosts with private IPs and still communicate with the external world without NAT? how can an internal host with a private IP (say 10.1.1.1) communicate with external world without NAT? I mean, how can the reply/response packet from the external world reach the original source as the packet with Dest IP = 10.1.1.1 will get lost as it can not be routed as many organizations can use the same IP. Why doesn't rfc 1918 (Address Allocation for Private Internets) make any mention of NAT?

    Read the article

  • Good design for a simple site that contains a blog

    - by bporter
    What is a good design for a simple web site with mostly static pages and a blog? I am helping a friend build this for their small business. We are looking for a simple approach that can be implemented fairly quickly. (I am a programmer and can help with coding, hosting, etc.) One option is to use a site like virb, which lets you choose from one of their themes and build a site pretty easily. You can also include a blog. They host the site for a pretty low monthly rate. I recommended this option, but my friend wants a design that is unique and custom. So, I took one of the themes and started modifying the HTML and CSS. This might still be a good option, but... ...If we are going to greatly modify it, why not just create the static pages from scratch and use something like Wordpress for the blog. Is this a good option? It looks fairly easy to integrate Wordpress with a site so that the design and behavior are really cohesive. Is this a good idea? Do you recommend any other approaches?

    Read the article

  • With Slick, how to change the resolution during gameplay?

    - by TheLima
    I am developing a tile-based strategy game using Java and the Slick API. So far so good, but I've come to a standstill on my options menu. I have plans for the user to be able to change the resolution during gameplay (it is pretty common, after all). I can already change to fullscreen and back to windowed, this was pretty simple... //"fullScreenOption" is a checkbox-like button. if (fullScreenOption.isMouseOver(mouseX, mouseY)) { if (input.isMouseButtonDown(Input.MOUSE_LEFT_BUTTON)) { fullScreenOption.state = !fullScreenOption.state; container.setFullscreen(fullScreenOption.state); } } But the container class (Implemented by Slick, not me), contrary to my previous beliefs, does not seem to have any resolution-change functions! And that's pretty much the situation...I know it's possible, but i don't know how to do it, nor what is the class responsible! The AppGameContainer class, used on the very start of the game's initialization, is the only place with any functions for changing the display-mode that I've found so far, but it's only used at the very start, and i haven't found a way to travel back to it from my options menu. //This is my implementation of it... public static void main(String[] args) throws SlickException { AppGameContainer app = new AppGameContainer(new Main()); // app.setTargetFrameRate(60); app.setVSync(true); app.setDisplayMode(800, 600, false); app.start(); } I can define it as a static global on the Main, but it's probably a (very) bad way to do it...

    Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >