Search Results

Search found 11565 results on 463 pages for 'device orientation'.

Page 177/463 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• Battery is drained too quickly

  - by LucaB

  I'm getting really low battery life under ubuntu, not even close to windows. I tried powertop, and I saw that my laptop is consuming in idle nearly 20 watts (a bit more). I tried to install laptop-mode-tools, change "good" into "bad" in powertop, but nothing changes. I see that I have the the HD audio output device which is running at 100% every time. Could this be the problem? This is a report from powertop. The battery reports a discharge rate of 22.8 W The estimated remaining time is 33 minutes Summary: 381.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec Usage Events/s Category Description 3.2 ms/s 182.7 Timer tick_sched_timer 100.0% Device Audio codec hwC0D3: Intel 7.9 ms/s 25.1 Process /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background no 1.9 ms/s 24.2 Interrupt [6] tasklet(softirq) 2.9 ms/s 23.2 Process /usr/lib/chromium-browser/chromium-browser --type=zygote 8.1 ms/s 20.3 Process /usr/lib/unity/unity-panel-service 0.7 ms/s 17.4 Timer hrtimer_wakeup 4.2 ms/s 12.6 Process unity-2d-panel 604.4 µs/s 9.7 Process syndaemon -i 2.0 -K -R -t 149.7 µs/s 9.7 kWork ieee80211_iface_work 0.8 ms/s 8.7 Process metacity 19.5 ms/s 1.0 Process powertop 3.0 ms/s 6.8 Process //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 699.0 µs/s 6.8 Process /usr/lib/thunderbird/thunderbird 4.3 ms/s 4.8 Process gnome-terminal 658.9 µs/s 2.9 Interrupt [1] timer(softirq) 75.1 µs/s 2.9 kWork iwl_bg_run_time_calib_work 163.8 µs/s 1.9 Process /usr/lib/accountsservice/accounts-daemon 70.6 µs/s 1.9 Process [ksoftirqd/2] 25.8 µs/s 1.9 Process [ksoftirqd/0] 1.0 ms/s 1.0 Process /usr/bin/python /usr/sbin/powernapd 408.2 µs/s 1.0 Process unity-2d-shell 189.8 µs/s 1.0 Process /usr/lib/chromium-browser/chromium-browser 124.4 µs/s 1.0 Process /usr/lib/unity-lens-applications/unity-applications-daemon 113.3 µs/s 1.0 Process /usr/lib/gnome-settings-daemon/gnome-settings-daemon 112.0 µs/s 1.0 Process nautilus -n 104.9 µs/s 1.0 Process /usr/lib/gvfs/gvfsd-trash --spawner :1.2 /org/gtk/gvfs/exec_spaw/0 77.5 µs/s 1.0 Process /usr/lib/x86_64-linux-gnu/colord/colord 75.6 µs/s 1.0 Process /usr/lib/gvfs/gvfs-gdu-volume-monitor 75.0 µs/s 1.0 Interrupt [53] i915 74.9 µs/s 1.0 Process /usr/lib/gvfs/gvfs-afc-volume-monitor What should I do to make the battery consumption lower?

  Read the article

• Xna, after mouse click cpu usage goes 100%

  - by kosnkov

  Hi i have following code and it is enough just if i click on blue window then cpu goes to 100% for like at least one minute even with my i7 4 cores. I just check even with empty project and is the same !!! public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; private Texture2D cursorTex; private Vector2 cursorPos; GraphicsDevice device; float xPosition; float yPosition; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { Viewport vp = GraphicsDevice.Viewport; xPosition = vp.X + (vp.Width / 2); yPosition = vp.Y + (vp.Height / 2); device = graphics.GraphicsDevice; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); cursorTex = Content.Load<Texture2D>("strzalka"); } protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); spriteBatch.Draw(cursorTex, cursorPos, Color.White); spriteBatch.End(); base.Draw(gameTime); } }

  Read the article

• Oracle Virtual Desktop Client with USB smart card reader

  - by wim.coekaerts

  I have my Sun Ray thin client at home which I use religiously, I use a Sun Ray 3i at work as my main desktop and just always take my smart card home and happily continue with the hot desking feature. We released a software version of the Sun Ray client called Oracle Virtual Desktop Client (OVDC). There is a version for Windows, Linux and Mac OS X. I have a minimac at home and I installed OVDC on it, which of course works great but since I like to re-connect to my session that I use at work, I wanted to try out the external usb smart card reader feature. I ordered a cute, low cost device online and tried it out. As expected, it worked out of the box without -any- configuration. I took the device, plugged it into my minimac, started OVDC, plugged in my smartcard and I got the password screen (screensaver) to get into my sun ray session on my server at work. Nothing new here, this is a feature that's been in the product but I had never tried it before and it works out of the box and is super easy and I just felt like sharing :-) Here are a few pictures : (1) login screen (2) smart cardreader without card (3) password screen (4) smart card reader with card

  Read the article

• Creating floppy drive special devices under Quantal

  - by JCCyC

  First, I'd like for the various special devices for different floppy capacities (like /dev/fd0u720 etc.) to be available. I tried to adapt some udev rules I found online. I tried this, which I saved as /etc/udev/rules.d/70-persistent-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy SUBSYSTEM=="block", KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) SUBSYSTEM=="block", KERNEL=="fd[0-9]*", ACTION=="add", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/%k" But to no avail. It seems the create_floppy_devices script isn't provided with 12.10. How do I obtain it? Second: I'm using MATE, and whenever I log in I get a message box saying it tried to mount the drive but failed. How do I disable this? Third (which is probably related to the second): Whenever there's a disk in the drive, the motor won't stop spinning. If I do a mdir of it, after it returns, the motor stops, and then starts again. I suspect there's some process in MATE doing this. UPDATE: For CentOS 6 (who does have a create_floppy_devices program) the following rules file worked. Saved as /etc/udev/rules.d/98-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) # drive A: is type 4 (1.44MB) - add other lines for other drives KERNEL=="fd0*", ACTION=="add", RUN+="/lib/udev/create_floppy_devices -c -t 4 -m %M -M 0660 -G floppy $root/%k"

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• How to Use a PIN Instead of a Password in Windows 8

  - by Taylor Gibb

  Entering your full password on a touch screen device can really become a pain in the neck, luckily for us we can link a short 4 digit PIN to our user account and log in with that instead. Note: PIN codes are nowhere near as safe as using an alphanumeric password, however, they do still have a purpose when you don’t want to enter your 15 character password on a touch screen device. Creating a PIN Press the Win + I keyboard combination to bring up the Settings Charm, then click on the Change PC settings link. This will open up the Modern UI PC Settings app, where you can click on the Users section. On the right hand side you will see a Create a PIN button, click on it. Now you will need to verify that you are the owner of this user account by entering your password. Then you can choose a PIN, remember that it can only contain digits. Now when you get to the login screen you will have the option to use a PIN. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• E: Sub-process /usr/bin/dpkg returned an error code (1)

  - by kss

  sudo apt-get install acroread, i got the following output Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: libldap2 libgnome-speech7 The following NEW packages will be installed: acroread 0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. (Reading database ... 237901 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./opt/Adobe/Reader9/Browser/intellinux/nppdf.so': No space left on device No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... /usr/bin/mandb: can't write to /var/cache/man/1645: No space left on device Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Some info about SD card patitions after the use of the dd statment and some oiters doubts?

  - by AndreaNobili

  I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• Hibernation to a swap file 12.04, fragfile output

  - by MrHug10

  I've been trying for some time now, to get hibernation working in Ubuntu 12.04 on my Dell XPS17. I dualboot Windows 7 and Ubuntu, each having their own partition and one shared partition for all my data and documents. As I would like to be able to swtich from ubuntu to windows without losing all the things I was currently doing in Ubuntu, I would like to be able to use hibernation. In order to achieve this I've followed the information at http://ubuntuforums.org/showthread.php?t=1042946. Only instead of creating my swap file on my linux partition (which is formatted: ext4), I've chosen to create one on my shared partition (which is formatted: ntfs). There is a problem with this though (at least, that's what I think the problem is), because when I call: sudo filefrag -v /media/data/Ubuntu_Swap_Space/6GiB.swap, I get the following output: Filesystem type is: 65735546 File size of /media/Data/Ubuntu_Swap_Space/6GiB.swap is 6442450944 (1572864 blocks, blocksize 4096) Discontinuity: Block 22 is at 25829097 (was 232498) /media/Data/Ubuntu_Swap_Space/6GiB.swap: 2 extents found So I'm not sure what I need to fill in as an offset to follow the rest of the earlier mentioned information. I've tried both the location of block 22 and the number that is listed after that, but when I then try sudo pm-hibernate nothing happens and this shows up in my /var/log/pm-suspend.log s2disk: Could not use the resume device (try swapon -a). Reason: No such device Hope someone can help me out with this! If you need more information about anything, please let me know!

  Read the article

• Wireless drivers

  - by Kencer

  The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Why is rvalue write in shared memory array serialised?

  - by CJM

  I'm using CUDA 4.0 on a GPU with computing capability 2.1. One of my device functions is the following: device void test(int n, int* itemp) // itemp is shared memory pointer { const int tid = threadIdx.x; const int bdim = blockDim.x; int i, j, k; bool flag = 0; itemp[tid] = 0; for(i=tid; i<n; i+=bdim) { // { code that produces some values of "flag" } } itemp[tid] = flag; } Each thread is checking some conditions and producing a 0/1 flag. Then each thread is writing flag at the tid-th location of a shared int array. The write statement "itemp[tid] = flag;" gets serialized -- though "itemp[tid] = 0;" is not. This is causing huge performance lag which technically should not be there -- I want to avoid it. Please help.

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• What to do when 'dpkg --configure -a' fails with too many errors?

  - by rudivonstaden

  During an upgrade from lucid (10.04) to precise (12.04), the X session froze, and I have been trying to recover the upgrade to get a stable system. I have performed the following steps: Used ssh to log in to the stalled system over the network. Checked the contents of the /var/log/dist-upgrade directory. There was no activity on main.log, apt.log or term.log. top showed that process 'precise' was using about 3% CPU, but I could find no evidence that the upgrade process was still doing anything. 'dpkg' did not show up in top, but it came up with pgrep dpkg | xargs ps Killed the 'dpkg' and 'precise' processes Tried to recover the upgrade by running sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a. This was partially successful (some packages were configured), but failed with the message Processing was halted because there were too many errors. I ran the same command a few times, and each time some packages were configured but others failed. Tried running sudo apt-get -f install. It fails with similar errors to dpkg. The current situation is that dpkg --configure -a and sudo apt-get -f install fails with two kinds of error: Dependency issues, e.g.: dpkg: dependency problems prevent configuration of cifs-utils: cifs-utils depends on samba-common; however: Package samba-common is not configured yet. dpkg: error processing cifs-utils (--configure): dependency problems - leaving unconfigured Resource conflict, e.g.: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Additionally, it seems there's reference to potential boot problems, so I'm not keen to reboot without fixing the install first: dpkg: too many errors, stopping Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab So my question is, how to get a working install when dpkg --configure -a fails?

  Read the article

• Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

  - by Ohgodwhy

  I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• My Windows Phone 7 experience: 45 days in

  - by Enrique Lima

  November 13th, 2010 was the day I got my Windows Phone 7.  It was an exciting day, a lot of anxiety too.  Over a phone? Sadly, yes! Being a Zune Pass subscriber, it was something worth looking forward too, being a consultant that relies and works with Microsoft technologies and having the option of OneNote (without converters and such) on my phone was a great thing too. Has that changed over 45 days?  No, not really.  But I find myself at the very same place I was with my iPhone, I don’t really use the music player as I spend enough time in front of a computer where I have Pandora and the Zune Desktop.  Or in a car with Satellite Radio.  As for OneNote, that keeps me hooked and with access to my notes no matter where I take them. The Device: Samsung Focus Likes: OneNote integration, Zune capabilities (just note my comment above), fast and smooth interface, calendar, tiles, the device itself. Dislikes: Heavy glitches in SharePoint interaction. And a very weird one I have experienced is, any pictures I get sent from an iPhone via email will register as an attachment but the pictures are not listed as the attachment once I open the message … weird!!  Then, of course, some apps have not made it to the platform (not sure they ever will … Pandora??!!??  Chase??!!??).  But those apps missing is not the phone, or Microsoft’s fault (IMO).  In summary, I am happy with it, and some of the missing apps have made me shift the way I work with the products or features affected … meaning I rely on my desktop stuff for that.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >