Search Results

Search found 16568 results on 663 pages for 'warning level'.

Page 177/663 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• Watin File Download Problem

  - by EmrahIlker

  When I clicked button with mouse, File Download Dialog opens directly. But when Watin Button Click methods click the vert same button on same ie window this message appears and wait my confirm To help protect your security, Internet Explorer blocked this site from downloading files to your computer. Click here for options. I turned off the Information bar for file downloads,(Internet Options-Security-Custom Level-Downloads-Automatic prompting for file downloads--Enable),allow active x content, lower security level for internet etc.. but didn't work. I'm using Win 7, IE8.

  Read the article

• Tomcat v7.0 failed to start on Eclipse

  - by Questions

  Whenever I am running a program on Eclipse, my tomcat is failing to start. I get a dialog box stating this message Server Tomcat v7.0 Server at localhost failed to start. In the console, I am getting this messages Nov 17, 2011 11:56:04 AM org.apache.catalina.core.AprLifecycleListener init INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre6\bin;C:\WINDOWS\Sun\Java\bin;C:\WINDOWS\system32;C:\WINDOWS;C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:/Program Files/Java/jre6/lib/i386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Java\jdk1.6.0_01\bin;C:\Program Files\Java\jre1.6.0_01\bin;C:\ILOG\CPLEX_Studio_Preview122\opl\bin\x86_win32;C:\ILOG\CPLEX_Studio_Preview122\opl\oplide\;C:\ILOG\CPLEX_Studio_Preview122\cplex\bin\x86_win32;C:\ILOG\CPLEX_Studio_Preview122\cpoptimizer\bin\x86_win32;;D:\JSP_Setup\eclipse-jee-helios-SR2-win32\eclipse;;. Nov 17, 2011 11:56:04 AM org.apache.tomcat.util.digester.SetPropertiesRule begin WARNING: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting property 'source' to 'org.eclipse.jst.jee.server:servletConfigTest' did not find a matching property. Nov 17, 2011 11:56:04 AM org.apache.tomcat.util.digester.SetPropertiesRule begin WARNING: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting property 'source' to 'org.eclipse.jst.jee.server:BeerAdvice3' did not find a matching property. Nov 17, 2011 11:56:04 AM org.apache.tomcat.util.digester.SetPropertiesRule begin WARNING: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting property 'source' to 'org.eclipse.jst.jee.server:BeerAdvice1' did not find a matching property. Nov 17, 2011 11:56:05 AM org.apache.coyote.http11.Http11Protocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 Nov 17, 2011 11:56:05 AM org.apache.coyote.ajp.AjpProtocol init INFO: Initializing Coyote AJP/1.3 on ajp-8009 Nov 17, 2011 11:56:05 AM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 682 ms Nov 17, 2011 11:56:05 AM org.apache.catalina.core.StandardService startInternal INFO: Starting service Catalina Nov 17, 2011 11:56:05 AM org.apache.catalina.core.StandardEngine startInternal INFO: Starting Servlet Engine: Apache Tomcat/7.0.2 java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:415) Caused by: java.lang.IllegalArgumentException: Invalid <url-pattern> entry_checking in servlet mapping at org.apache.catalina.core.StandardContext.addServletMapping(StandardContext.java:2823) at org.apache.catalina.core.StandardContext.addServletMapping(StandardContext.java:2799) at org.apache.catalina.deploy.WebXml.configureContext(WebXml.java:1278) at org.apache.catalina.startup.ContextConfig.webConfig(ContextConfig.java:1255) at org.apache.catalina.startup.ContextConfig.configureStart(ContextConfig.java:878) at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:313) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119) at org.apache.catalina.util.LifecycleBase.fireLifecycleEvent(LifecycleBase.java:89) at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:4667) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:139) at org.apache.catalina.core.ContainerBase.startInternal(ContainerBase.java:988) at org.apache.catalina.core.StandardHost.startInternal(StandardHost.java:771) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:139) at org.apache.catalina.core.ContainerBase.startInternal(ContainerBase.java:988) at org.apache.catalina.core.StandardEngine.startInternal(StandardEngine.java:275) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:139) at org.apache.catalina.core.StandardService.startInternal(StandardService.java:427) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:139) at org.apache.catalina.core.StandardServer.startInternal(StandardServer.java:649) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:139) at org.apache.catalina.startup.Catalina.start(Catalina.java:585) ... 6 more I had run the code previously, but now it is giving this problems. Also, I went through this post http://forums.opensuse.org/applications/391114-tomcat6-eclipse-not-working.html But is not helping me. Please help at the earliest.

  Read the article

• ASP.NET + GoDaddy Free Hosting?

  - by Sahat

  Has anyone successfully been able to deploy ASP.NET website to GoDaddy's free hosting? I am talking about free hosting that comes with a domain package from GoDaddy. The catch of the free hosting is having an annoying Google Ads banner in a frame on top of the page. I've searched Google, stackoverflow and GoDaddy forums but I can't find anywhere the solution to my problem. When I upload a ASP.NET website to GoDaddy, it gives me an error - something about TrustLevel. Someone told me that by default asp.net websites have Full Trust Level which GoDaddy doesn't allow. I've even tried changing Trust Level to Medium manually, but with no luck. What may be the problem?

  Read the article

• Does mod_rewrite in subdirectories' .htaccess override higher levels?

  - by Ryan

  I'm using mod_rewrite to map my old directory structure to a new one. I have the following rule in my top-level .htaccess file, and it works: RewriteEngine On RewriteCond %{REQUEST_URI} /blog/archives/(.*) RewriteRule ^.*$ /archives/%1 [L,R=301] As you can guess, this takes http://example.com/blog/archives/00001.php and redirects it to http://example.com/archives/00001.php. But when I add these rewrite rules to the .htaccess file in the /blog directory RewriteEngine on RewriteRule atom.xml$ /atom.xml [L,R=301] the top-level redirect no longer works. If I move the rule in the /blog .htaccess file to the top-levle file both rules work. Can someone explain what is happening here?

  Read the article

• feature extraction from acoustic signals

  - by Dolphin

  Hi everyone, It's been a while. I found APIs in Java for extracting features from acoustic audio files and symbolic files separately. But now I have a problem in mapping from low level wav audio features to high level midi features. i.e. I need to write the extracted wav audio features on to midi format. But I cannot think of anything even close to it. Can someone pls provide me some insight as in how I can approach this. Greatly appreciate your responses. Advance thanks

  Read the article

• Are frameworks using byte-code generation creating leaky abstractions?

  - by Gabriel Šcerbák

  My point is, if you don't understand the abstraction of a framework, you can still decompile it and understand it, because you know the language e.g. Java. However, when byte-code generation happens, you have to understand even a lower level - JVM level byte-codes. I am really affraid of using any of such frameworks, which are many. Most of the time I think the reason for byte-code generation is simply lack of language features such as metaprogramming. Do you agree? What is your opinion and argument? How do you take over the problem with leaky abstractions in those frameworks?

  Read the article

• How do I prevent my form from freezing when it is loading an image from the web at the click of a button?

  - by Vimal Basdeo

  I want to display an image from the web to a panel in another Jframe at the click of a button but whenever I click the button first the image loads and during this time the current form potentially freezes and once the image has loaded the form is displayed with the image.. How can I avoid the situation where my form freezes since it is very irritating My codes :: My current class private void btn_TrackbusActionPerformed(java.awt.event.ActionEvent evt) { try { sendMessage("Query,map,$,start,211,Arsenal,!"); System.out.println(receiveMessage()); } catch (UnknownHostException ex) { Logger.getLogger(client_Trackbus.class.getName()).log(Level.SEVERE, null, ex); } catch (IOException ex) { Logger.getLogger(client_Trackbus.class.getName()).log(Level.SEVERE, null, ex); } catch (Exception ex) { Logger.getLogger(client_Trackbus.class.getName()).log(Level.SEVERE, null, ex); } client_trackedbus nextform=new client_trackedbus(planform,connection,packet_receive,packet_send); this.setVisible(false); this.dispose(); nextform.setVisible(true); // TODO add your handling code here: } My next class that displays the image public class client_trackedbus extends javax.swing.JFrame { client_planform planform=null; DatagramSocket connection=null; DatagramPacket packet_receive=null; DatagramPacket packet_send=null; JLabel label=null; /** Creates new form client_trackedbus */ public client_trackedbus(client_planform planform,DatagramSocket connection,DatagramPacket packet_receive,DatagramPacket packet_send) { initComponents(); this.planform=planform; this.connection=connection; this.packet_receive=packet_receive; this.packet_send=packet_send; try { displayMap("http://www.huddletogether.com/projects/lightbox2/images/image-2.jpg", jPanel1, new JLabel()); } catch (MalformedURLException ex) { Logger.getLogger(client_trackedbus.class.getName()).log(Level.SEVERE, null, ex); } } private void displayMap(String url,JPanel panel,JLabel label) throws MalformedURLException{ URL imageurl=new URL(url); Image image=(Toolkit.getDefaultToolkit().createImage(imageurl)); ImageIcon icon = new ImageIcon(image); label.setIcon(icon); panel.add(label); // System.out.println(panel.getSize().width); this.getContentPane().add(panel); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { jPanel1 = new javax.swing.JPanel(); jLabel1 = new javax.swing.JLabel(); btn_Exit = new javax.swing.JButton(); btn_Plan = new javax.swing.JButton(); setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE); setTitle("Public Transport Journey Planner"); javax.swing.GroupLayout jPanel1Layout = new javax.swing.GroupLayout(jPanel1); jPanel1.setLayout(jPanel1Layout); jPanel1Layout.setHorizontalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 368, Short.MAX_VALUE) ); jPanel1Layout.setVerticalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 172, Short.MAX_VALUE) ); jLabel1.setFont(new java.awt.Font("Arial", 1, 18)); jLabel1.setText("Your tracked bus"); btn_Exit.setText("Exit"); btn_Exit.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { btn_ExitActionPerformed(evt); } }); btn_Plan.setText("Plan journey"); btn_Plan.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { btn_PlanActionPerformed(evt); } }); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane()); getContentPane().setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(104, 104, 104) .addComponent(jLabel1)) .addGroup(layout.createSequentialGroup() .addContainerGap() .addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)) .addGroup(layout.createSequentialGroup() .addGap(65, 65, 65) .addComponent(btn_Plan) .addGap(65, 65, 65) .addComponent(btn_Exit, javax.swing.GroupLayout.PREFERRED_SIZE, 87, javax.swing.GroupLayout.PREFERRED_SIZE))) .addContainerGap(20, Short.MAX_VALUE)) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(35, 35, 35) .addComponent(jLabel1) .addGap(18, 18, 18) .addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE) .addGap(18, 18, 18) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(btn_Exit) .addComponent(btn_Plan)) .addContainerGap(12, Short.MAX_VALUE)) ); pack(); }// </editor-fold> private void btn_ExitActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: Exitform(); } private void btn_PlanActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: this.setVisible(false); this.dispose(); this.planform.setVisible(true); } private void Exitform(){ this.setVisible(false); this.dispose(); } /** * @param args the command line arguments */ public static void main(String args[]) { java.awt.EventQueue.invokeLater(new Runnable() { public void run() { // new client_trackedbus().setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JButton btn_Exit; private javax.swing.JButton btn_Plan; private javax.swing.JLabel jLabel1; private javax.swing.JPanel jPanel1; // End of variables declaration }

  Read the article

• postgresql syntax while exists loop

  - by veilig

  I'm working at function from Joe Celkos book - Trees and Hierarchies in SQL for Smarties I'm trying to delete a subtree from an adjacency list but part my function is not working yet. WHILE EXISTS –– mark leaf nodes (SELECT * FROM OrgChart WHERE boss_emp_nbr = -99999 AND emp_nbr > -99999) LOOP –– get list of next level subordinates DELETE FROM WorkingTable; INSERT INTO WorkingTable SELECT emp_nbr FROM OrgChart WHERE boss_emp_nbr = -99999; –– mark next level of subordinates UPDATE OrgChart SET emp_nbr = -99999 WHERE boss_emp_nbr IN (SELECT emp_nbr FROM WorkingTable); END LOOP; my question: is the WHILE EXISTS correct for use w/ postgresql? I appear to be stumbling and getting caught in an infinite loop in this part. Perhaps there is a more correct syntax I am unaware of.

  Read the article

• Where to open sessions in a Spring/Hibernate stack?

  - by CaptainAwesomePants

  I'm trying to figure out a good design for a Spring/Hibernate app. When creating such an app, it appears like there are a handful of major decisions. The first major decision seems to be where to put the session/transaction boundary. It seems like I have 3 major choices: as a filter before controllers are even invoked, immediately below the controllers at the service call level, and stuffed way below the business level in repository calls. It seems to me like the right call is the middle path, but I'm not sure. I don't want my transactions open too long, but at the same time, I don't want to constantly worry about detached objects and lazy loading in the business logic. Still, there are some downsides. For instance, it makes it hard for the business logic to make a remote call without holding up a transaction for a few seconds. I wonder if there's a better way?

  Read the article

• Accessing functions in a parent controller

  - by meridimus

  I have made a ViewController in XCode for an iPhone project I'm working on, but I have a question about nested ViewControllers and what the best way to access a parents ViewController functions? Essentially, at the moment I have a SwitchViewController with MenuViewController (nested) and GameViewController (nested, which renders OpenGL ES). At the moment, I have animated view switching controlled in the SwitchViewController which works. But I want to call it after a player has selected the level from the MenuViewController and run the appropriate level in GameViewController. Not rocket science, I know. What's the best way to call parent functions?

  Read the article

• Why won't this SQL CAST work?

  - by Kev

  I have a nvarchar(50) column in a SQL Server 2000 table defined as follows: TaskID nvarchar(50) NULL I need to fill this column with some random SQL Unique Identifiers (I am unable to change the column type to uniqueidentifier). I tried this: UPDATE TaskData SET TaskID = CAST(NEWID() AS nvarchar) but I got the following error: Msg 8115, Level 16, State 2, Line 1 Arithmetic overflow error converting expression to data type nvarchar. I also tried: UPDATE TaskData SET TaskID = CAST(NEWID() AS nvarchar(50)) but then got this error: Msg 8152, Level 16, State 6, Line 1 String or binary data would be truncated. I don't understand why this doesn't work but this does: DECLARE @TaskID nvarchar(50) SET @TaskID = CAST(NEW() AS nvarchar(50)) I also tried CONVERT(nvarchar, NEWID()) and CONVERT(nvarchar(50), NEWID()) but got the same errors.

  Read the article

• Javascript Input type

  - by Phoenix

  Hi All, In javascript we use input type = file .. to open up a file browser pop-up .. is there a way to limit access to folders .. I want to select a folder then ftp all the files in the folder .. so i need access upto only the folder level and not file level .. i guess it would be tedious to go an manually select every file from the folder and then ftp .. is there a way to do that.. Also, how can i set the file-browser pop-up window path to a default one ?

  Read the article

• deep injection - spring

  - by Bob

  What is the best way (or options) for accessing spring components at layers deep within the application that aren't managed by spring? For example, I have a low level utility POJO class into which I need to autowire/inject a spring component. I'll call it LowLevelHelper. There are multiple classes that use LowLevelHelper - most are layers away from anything that is hooked up with spring. One option would be to make all the layers in to spring components, but that seems like I'm hacking my design to force spring to help me. I have some complex things going on that won't be nearly as clean if I have to @Autowire all the pieces and don't new anything. Another option might be to manually inject the component in the low level class, but I'm not really sure if this is possible or the right solution.

  Read the article

• ASP.NET and SQL server with huge data sets

  - by Jake Petroules

  I am developing a web application in ASP.NET and on one page I am using a ListView with paging. As a test I populated the table it draws from with 6 million rows. The table and a schema-bound view based off it have all the necessary indexes and executing the query in SQL Server Management Studio with SELECT TOP 5 returned in < 1 second as expected. But on the ASP.NET page, with the same query, it seems to be selecting all 6 million rows without any limit. Shouldn't the paging control limit the query to return only N rows rather than the entire data set? How can I use these ASP.NET controls to handle huge data sets with millions of records? Does SELECT [columns] FROM [tablename] quite literally mean that for the ListView, and it doesn't actually inject a TOP <n> and does all the pagination at the application level rather than the database level?

  Read the article

• VB6 ADO Command to SQL Server

  - by Emtucifor

  I'm getting an inexplicable error with an ADO command in VB6 run against a SQL Server 2005 database. Here's some code to demonstrate the problem: Sub ADOCommand() Dim Conn As ADODB.Connection Dim Rs As ADODB.Recordset Dim Cmd As ADODB.Command Dim ErrorAlertID As Long Dim ErrorTime As Date Set Conn = New ADODB.Connection Conn.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Initial Catalog=database;Data Source=server" Conn.CursorLocation = adUseClient Conn.Open Set Rs = New ADODB.Recordset Rs.CursorType = adOpenStatic Rs.LockType = adLockReadOnly Set Cmd = New ADODB.Command With Cmd .Prepared = False .CommandText = "ErrorAlertCollect" .CommandType = adCmdStoredProc .NamedParameters = True .Parameters.Append .CreateParameter("@ErrorAlertID", adInteger, adParamOutput) .Parameters.Append .CreateParameter("@CreateTime", adDate, adParamOutput) Set .ActiveConnection = Conn Rs.Open Cmd ErrorAlertID = .Parameters("@ErrorAlertID").Value ErrorTime = .Parameters("@CreateTime").Value End With Debug.Print Rs.State ' Shows 0 - Closed Debug.Print Rs.RecordCount ' Of course this fails since the recordset is closed End Sub So this code was working not too long ago but now it's failing on the last line with the error: Run-time error '3704': Operation is not allowed when the object is closed Why is it closed? I just opened it and the SP returns rows. I ran a trace and this is what the ADO library is actually submitting to the server: declare @p1 int set @p1=1 declare @p2 datetime set @p2=''2010-04-22 15:31:07:770'' exec ErrorAlertCollect @ErrorAlertID=@p1 output,@CreateTime=@p2 output select @p1, @p2 Running this as a separate batch from my query editor yields: Msg 102, Level 15, State 1, Line 4 Incorrect syntax near '2010'. Of course there's an error. Look at the double single quotes in there. What the heck could be causing that? I tried using adDBDate and adDBTime as data types for the date parameter, and they give the same results. When I make the parameters adParamInputOutput, then I get this: declare @p1 int set @p1=default declare @p2 datetime set @p2=default exec ErrorAlertCollect @ErrorAlertID=@p1 output,@CreateTime=@p2 output select @p1, @p2 Running that as a separate batch yields: Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'default'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'default'. What the heck? SQL Server doesn't support this kind of syntax. You can only use the DEFAULT keyword in the actual SP execution statement. I should note that removing the extra single quotes from the above statement makes the SP run fine. ... Oh my. I just figured it out. I guess it's worth posting anyway.

  Read the article

• How can I make this client as a multithread client?

  - by Johanna

  Hi, I have read a lot about multithread client but for this one,I can not make it multithread! would you please help me? public class MainClient implements Runnable{ private static InformationClass info = new InformationClass(); private static Socket c; private static String text; public static String getText() { return text; } public static void setText(String text) { MainClient.text = text; } private static PrintWriter os; private static BufferedReader is; static boolean closed = false; /** * @param args the command line arguments */ public static void main(String[] args) { MainFrame farme = new MainFrame(); farme.setVisible(true); try { c = new Socket("localhost", 5050); os = new PrintWriter(c.getOutputStream(), true); is = new BufferedReader(new InputStreamReader(c.getInputStream())); } catch (UnknownHostException ex) { Logger.getLogger(MainClient.class.getName()).log(Level.SEVERE, null, ex); } catch (IOException ex) { Logger.getLogger(MainClient.class.getName()).log(Level.SEVERE, null, ex); } } public static void active() { String teXt = MainClient.getText(); System.out.println(teXt); os.println(teXt); try { String line = is.readLine(); System.out.println("Text received: " + line); os.flush(); is.close(); is.close(); c.close(); } catch (IOException ex) { Logger.getLogger(MainClient.class.getName()).log(Level.SEVERE, null, ex); } } } also active method will be called when the client write something on the text area and then clicks on the send button. 2) also i have a question that: in the other class I have this action performed for my send button,does it mean that client is multithread?? private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) { new Thread(new Runnable() { @Override public void run() { // This gets run in a background thread String text = jTextArea1.getText(); jTextArea2.append(client.getCurrentName() + " : " + text + "\n"); MainClient.setText(client.getCurrentName() + " : " + text + "\n"); clear(); MainClient.active(); } }).start(); } Last EDIT: this is my active method: public static void active() { String teXt = MainClient.getText(); os.println(teXt); String line = is.readLine(); System.out.println("Text received: " + line); os.flush(); is.close(); is.close(); c.close(); }

  Read the article

• Best approach to show big amount of "grid" data

  - by Jorge Ramírez

  Hello all. I am building an application for Android (1.5) that, after quering a webservice, shows to the user a big amount of data that should be displayed in a "grid" or "table" style. I must show a result of about 7 columns and 50 rows (for example a customer list with names, adresses, telephone number, sales amount last year and so). Obviously, the 7 columns will not fix in the screen and I would like the user would be able to scroll up/down and LEFT/RIGHT (important because of the number of columns) to explore the grid results. cell selection level is NOT necessary, as much I would need row selection level. What is the best approach to get this interface element? Listview / GridView / TableLayout? Thanks

  Read the article

• Which Java modules get Spring Security

  - by HDave

  I have a classic Java SOA application, with a web UI module, web services module, a service module (Java API), a domain module and a persistence module. In a sense, each of these modules has their own public API. My understanding of Spring Security is that I can use web filters to handle the security of the web gui and web services, and method level security (via annotations) for the service module. My question is this: should I bother to add method level security to the domain module and the persistence module or is that considered overkill?

  Read the article

• KB2667402 update fails to install with 0x80004005. Yet it's also showing as installed

  - by growse

  I've got 15 Windows 2008 R2 x64 servers that I manage with SCCM2012. I've noticed during my Windows updates reporting that there's two boxes that are showing as 'error' for total updates installed. Digging around, it looks like the update that is failing to install is KB2667402. The Software Centre on the server itself shows the following: The software change returned error code 0x80004005(-2147467259). So SCCM thinks it hasn't installed the update. However, if I go to the Programs and Features application and select 'Windows Updates', I can see an entry for KB2667402: If I try and uninstall this, I get an error: An error occurred. Not all of the updates were successfully uninstalled If I try and download the patch from Microsoft directly, I get the same error installing as displayed in Software Centre. The only odd thing about this setup that I can think would affect this is that I run the RDP service on a non-standard port. However, I do this across all the servers, so it seems odd that it would fail on just 2 out of 15. The tail of the WindowsUpdate.log file is below: 2012-06-26 15:33:53:184 3924 1608 COMAPI ------------- 2012-06-26 15:33:53:190 3924 1608 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:190 3924 1608 COMAPI --------- 2012-06-26 15:33:53:190 3924 1608 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes 2012-06-26 15:33:53:190 3924 1608 COMAPI - Updates in request: 1 2012-06-26 15:33:53:190 3924 1608 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:53:199 860 1198 Agent ************* 2012-06-26 15:33:53:199 860 1198 Agent ** START ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:53:199 860 1198 Agent ********* 2012-06-26 15:33:53:199 860 1198 Agent * Updates to install = 1 2012-06-26 15:33:53:201 860 1198 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2667402) 2012-06-26 15:33:53:201 860 1198 Agent * UpdateId = {48859BE4-1331-4CD2-8E70-3B537180A0D0}.103 2012-06-26 15:33:53:201 860 1198 Agent * Bundles 1 updates: 2012-06-26 15:33:53:201 860 1198 Agent * {D854ECF1-99A7-4D67-B435-2D041BF79565}.103 2012-06-26 15:33:53:204 3924 1608 COMAPI - Updates to install = 1 2012-06-26 15:33:53:204 3924 1608 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:221 860 1198 Agent WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point 2012-06-26 15:33:53:222 860 1198 Agent WARNING: LoadLibrary failed for srclient.dll with hr:8007007e 2012-06-26 15:33:53:322 860 1198 DnldMgr Preparing update for install, updateId = {D854ECF1-99A7-4D67-B435-2D041BF79565}.103. 2012-06-26 15:33:53:325 5700 117c Misc =========== Logging initialized (build: 7.5.7601.17514, tz: +0100) =========== 2012-06-26 15:33:53:325 5700 117c Misc = Process: C:\Windows\system32\wuauclt.exe 2012-06-26 15:33:53:325 5700 117c Misc = Module: C:\Windows\system32\wuaueng.dll 2012-06-26 15:33:53:324 5700 117c Handler ::::::::::::: 2012-06-26 15:33:53:325 5700 117c Handler :: START :: Handler: CBS Install 2012-06-26 15:33:53:325 5700 117c Handler ::::::::: 2012-06-26 15:33:53:330 5700 117c Handler Starting install of CBS update D854ECF1-99A7-4D67-B435-2D041BF79565 2012-06-26 15:33:53:342 5700 117c Handler CBS package identity: Package_for_KB2667402~31bf3856ad364e35~amd64~~6.1.2.0 2012-06-26 15:33:53:366 5700 117c Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\windows6.1-kb2667402-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\inst 2012-06-26 15:33:56:270 5700 3b8 Handler FATAL: CBS called Error with 0x80004005, 2012-06-26 15:33:56:402 5700 117c Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80004005 2012-06-26 15:33:56:405 5700 117c Handler ::::::::: 2012-06-26 15:33:56:406 5700 117c Handler :: END :: Handler: CBS Install 2012-06-26 15:33:56:406 5700 117c Handler ::::::::::::: 2012-06-26 15:33:56:433 860 1198 Agent ********* 2012-06-26 15:33:56:433 860 1198 Agent ** END ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:56:433 860 1198 Agent ************* 2012-06-26 15:33:56:433 860 d14 AU Can not perform non-interactive scan if AU is interactive-only 2012-06-26 15:33:56:450 3924 e40 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:450 3924 e40 COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0) 2012-06-26 15:33:56:450 3924 e40 COMAPI - Reboot required = No 2012-06-26 15:33:56:450 3924 e40 COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022 2012-06-26 15:33:56:451 3924 e40 COMAPI --------- 2012-06-26 15:33:56:451 3924 e40 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:451 3924 e40 COMAPI ------------- 2012-06-26 15:33:56:536 860 13a4 AU Triggering Offline detection (non-interactive) 2012-06-26 15:33:56:536 860 d14 AU ############# 2012-06-26 15:33:56:536 860 d14 AU ## START ## AU: Search for updates 2012-06-26 15:33:56:536 860 d14 AU ######### 2012-06-26 15:33:56:539 860 d14 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:56:539 860 1788 Agent ************* 2012-06-26 15:33:56:539 860 1788 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:56:539 860 1788 Agent ********* 2012-06-26 15:33:56:539 860 1788 Agent * Online = No; Ignore download priority = No 2012-06-26 15:33:56:539 860 1788 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2012-06-26 15:33:56:539 860 1788 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:56:539 860 1788 Agent * Search Scope = {Machine} 2012-06-26 15:33:58:562 860 1788 Agent * Found 0 updates and 70 categories in search; evaluated appl. rules of 180 out of 1072 deployed entities 2012-06-26 15:33:58:565 860 1788 Agent ********* 2012-06-26 15:33:58:565 860 1788 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:58:565 860 1788 Agent ************* 2012-06-26 15:33:58:650 860 f2c AU >>## RESUMED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU # 0 updates detected 2012-06-26 15:33:58:650 860 f2c AU ######### 2012-06-26 15:33:58:650 860 f2c AU ## END ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU ############# 2012-06-26 15:33:58:650 860 f2c AU Featured notifications is disabled. 2012-06-26 15:33:58:651 860 f2c AU Successfully wrote event for AU health state:0 2012-06-26 15:33:58:652 860 f2c AU Successfully wrote event for AU health state:0

  Read the article

• Mimic property/list changes on an object on another object

  - by soundslike

  I need to mimic changes (property/list) changes on an object and then apply it to another object to keep the structure/property the same. In essence it's like cloning etc. the biz rules require certain properties to not be applied to the other object, so I can't just clone the object otherwise this would be easy. I've already walked the source object to get INotifyPropertyChanged and IListChanged events, so I have the "source" and the args (Property or List) changed event notifications. Given that I guess I could build a reflection "hierarchy path" starting from the top level of the source object to get to the Property or List changed "source" (which could be several levels deep). Ignoring for the moment that certain object properties should not propagate to the other object, what's a way to build this "path"? Is a brute force top level down to build the "path" (and discard on the way back up if we don't hit the original changed event "source") the only way to do it? Any clever ideas on how to mimic changes from one object to another object?

  Read the article

• Subquery works in 9i but not in 11g

  - by Zsuetam

  Statement below is working on Oracle 9i but not on Oracle 11g SELECT * FROM ( SELECT 0 scrnfail_rate, '9' zz, 7 hh FROM DUAL UNION ALL SELECT 0 scrnfail_rate, '9' zz, 7 hh FROM DUAL ) WHERE zz IS NOT NULL AND TO_CHAR (hh) NOT IN ( SELECT DECODE ( scrnfail_rate, 0, -1, ROUND (LEVEL * 1 / (scrnfail_rate / 100)) - ROUND (1 / (2 * (scrnfail_rate / 100))) ) AS nno FROM DUAL WHERE NVL (scrnfail_rate, 0) > 0 CONNECT BY LEVEL <= ROUND(9 * scrnfail_rate / 100) ) It looks like Oracle 11g is ignoring where decode or even where clause in the subquery. This query should return two rows as it does on Oracle 9i, but results ORA-01476: divisor is equal to zero on Oracle 11g EE 11.2.0.1.0 - 64bit. Can anyone help? Thanks!

  Read the article

• Restrict access to a specific URL, running on IIS7 / ASP.NET

  - by frankadelic

  I am deploying a public ASP.NET website on an IIS7 web farm. The application runs on 3 web servers and is behind a firewall. We want to create a single page on the website that is accessible only to internal users. It is primarily used for diagnostics, trigger cache expiry, etc. /admin/somepage.aspx What is the best way to control access to this page? We need to: Prevent all external (public) users from accessing the URL. Permit specific internal users to access the page, only from certain IPs or networks. Should this access control be done at the (a) network level, (b) application level, etc.?

  Read the article

• googlemap zoom in iphone application

  - by Filthy Night

  Hi all, i have a problem in iphone application that i have integrated google map and i am calculating center runtime so that the map shows both points on the iphone screen, the alogrithm applied (thanks to stackover flow) is working fine in case of 2 locations very far from each other. But it is not working for near locations and the zoom level goes too much that it is not able to show any images of those two near locations, so i want to put a check that if the location are very near to each other OR the google is not able to show the maps of the locations then it choose the default zoom level so that it shows the map on the screen instead of blank / black screen. Thanks in advance

  Read the article

• SQL Server 2005 drop column with constraints

  - by Julien N

  Hi ! In Sql Server 2005 I have a column with a "DEFAULT" constraint. I'd like to create a script that drops that column. The problem is that is returns me that error : Msg 5074, Level 16, State 1, Line 1 The object 'DF__PeriodSce__IsClo__4BCC3ABA' is dependent on column 'IsClosed'. Msg 4922, Level 16, State 9, Line 1 ALTER TABLE DROP COLUMN IsClosed failed because one or more objects access this column. I couldn't find an easy way to drop a column and all its associated constraints (only found big scripts that look into system table... there MUST (!!) be a "nice" way to do that !). And as the DEFAULT constraint's name has been randomly generated, I can't drop it by name. Thanks for your help.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >