Search Results

Search found 15237 results on 610 pages for 'browser defaults'.

Page 179/610 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Fresh XP Install: PS2 Keyboard not working

  - by RedLeader

  I reformatted a drive to NTFS (not quick) and installed Windows XP on it. Now it's trying to do the graphical portion of the setup, wanting me to click Accepts and Nexts... but I can't! The keyboard works to get to the BIOS and in the BIOS. I have reset the CMOS many times, tried fail-safe and optimized defaults, and even enabled USB Keyboard and mouse support (even though the I have no USB devices plugged in).

  Read the article

• Setting up Dynamic DNS for Wireless Cameras And Accessing them Remotely

  - by Mike Szp.

  I've been trying to set up two TP LINK wireless N cameras that I bought so that I can see them remotely. I've set it up so that each has it's own ip address (192...105/192...106) and I can access them if I type that into the browser of a local computer The thing is that I don't know how to access them from another remote PC. My current setup is a a each camera connected to the router which then connects to the modem. When I set up the Dynamic DNS, and I access the "webpage" for my IP through a remote computer, it just goes to the configuration page of the modem. I have no idea how to make it go to the router or to the cameras. the router has its own ip range of 192.168.1.x while the modem has 192.168.2.x To access the cameras I type into the web browser: 192.168.1.114:100 on the local computer but I have no idea how to get there through the webpage of my Dynamic DNS remotely.

  Read the article

• install CA root trust certificate in Cent OS

  - by Shyamin Ayesh

  i install SSL certificate in my web site and now i have some questions about it. my web site is working correctly in google chrome web browser but it's not working in firefox browser. one of my friend is say's me the CA Root Trust certificate is not installed in the server. now i need to know how can i confirm the CA Root Trust is not installed and how to install CA Root Trust certificate in Cent OS 6.4 minimal with Apache. my SSL certificate issued AlphaSSL and it's domain validating wildcard certificate CA - G2. thank you very much for prompt reply !

  Read the article

• how to best config for synflood setup in csf but web response still fast

  - by Binh Nguyen

  my server down random every day 4-5 time cause get high load very quick.. I have install csf and with some config server now stable.. load around 5. BUT the big isuse is : the real user very hard to access website specially from IE browser you can test at xaluan.com the flowing is config using in csf: SYNFLOOD = "1" SYNFLOOD_RATE = "100/s" SYNFLOOD_BURST = "10" CONNLIMIT = "80;30" PORTFLOOD = "80;tcp;70;5" CT_LIMIT = "29" # other config may same as default i playing around with this config for a week but still not work around.. If increase the rate SYNFLOOD_RATE = "140/s" or more.. the website response very fast.. be side have bad effect of server load increase so fast normal 20 and may be up to few hundred in peck time .. my need is response time fast but load still low.. please help thanks ps: server runing nginx frontend, apache, mysql, php ,, the home page has around 70 elements which will cached in browser in fist time access..

  Read the article

• Increasing disk performance on Linux

  - by Robert Munteanu

  What are some good ways of increasing disk performance on Linux? I'm not interested in hdparm settings, since those are: set to good defaults in recent distros; not applicable to SATA drives.

  Read the article

• How to get rid of Google's language detection permanently?

  - by wabbble

  Using Chrome 15 on Windows (all tho' I've learned it doesn't matter what browser you use), when using a Google product it automatically either translates or redirects to my native language. If I go google.com, I excpect to get the English version of it - that does not happen, instead I have to click on the bottom of the page on the link "Go to Google MyLanguage" and it still does the same thing after closing and opening the browser. Hence my question, how to disable (get rid of, for good) Google's language detection? Maybe there's a work-around?

  Read the article

• How do I change the URL handler for Apple Mail?

  - by Alex Reynolds

  When I highlight and right-click on text in an email message in Apple Mail 4.4 (1082), I can select "Search in Google". Despite having either Google Chrome or Mozilla Firefox set as my default web browser within Apple Safari 5.0.3 (6533.19.4) preferences, Apple Mail will open Safari, then open a new window in Safari with the search results. How do I change the default URL handler in Apple Mail, so that searches are opened in my default browser? Or is this a known bug? Thanks for your advice!

  Read the article

• Auto-detect proxy settings on network

  - by Ali Lown

  I am having problems trying to run web browser software on the local network through the proxy. When running off the profile drive which is on a network share, the system is unable to auto-detect proxy settings. When running off the local C drive, the browsers are able to correctly autodetect the settings. The error from the browser is about it being unable to fetch the proxy configuration file. Is this some form of authentication preventing it retreiving the settings when running of the network location? PS. Would this be better off on superuser?

  Read the article

• Domain DNS Lookup time

  - by Maxim Dsouza

  I have a website hosted at www.doondoo.com. The site when loaded in the browser for the first time, takes a bit of time to load. It looks like the DNS lookup takes a lot of time. Once the site is loaded on the browser, other pages load very quickly. The application is hosted on Linode and I have pointed my domain to the nameservers of Linode i.e ns1.linode.com and ns2.linode.com I wanted to know what is the reason behind this delay in the loading. And what could be the possible means to improve it. Thanks in advance.

  Read the article

• Windows 7 remains powered on when restarting

  - by BombDefused

  I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

  Read the article

• Firefox Start page stay white

  - by Jensen

  Hi, I'm a Firefox user since several years so I know it but today I had a strange problem. I installed the last stable version of Firefox (3.5.5) on a computer but when I launch the browser the page stay empty (blank). In the settings I set the startpage as Google but nothing to do. When the browser starts in the address bar it is well written google.com but the page remains blank. I must click on the button in the address bar so that the site appears. I've never had this problem with Firefox, it's strange. Thanks

  Read the article

• Connecting Snow Leopard 10.6.4 to a Linux shared folder using Samba

  - by Vittorio Vittori

  Hi, I'm trying to connect to a web server running on Linux CentOS 5.5 where I've shared a folder. I'm trying to connect to the directory with Snow Leopart 10.6.4 client without success. On CentOS I've started the Samba service and a Samba user with his password and then I've tried to connect to the server with the command smb://10.0.0.7 to reach the IP of the machine and then writing the username and password I've previously created. The server returns me the list of the shared folders with the leopard specific browser, when I click to the folder I want the browser returns this error (translated from Italian): Leopard message: Connection failed There was an error on connecting to "smb://10.0.0.7". Please verify the name or the IP of the server, and try again. How can I do to solve the connection problem?

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• http://localhost/~admin/ gets a 403

  - by Pavan Katepalli

  When I go to localhost/~admin/ or 127.0.0.1/~admin/ my browser says: "Forbidden You don't have permission to access /~admin/ on this server." How do I change this?!??!?! It's driving me nuts! when I go to localhost or 127.0.0.1/ my browser says: "It Works!". I'm running mac osx 10.8. I created aliases in my .bash_profile file so that I can start, restart and stop Apache quickly: alias startApache="sudo apachectl start" alias stopApache="sudo apachectl stop" alias restartApache="sudo apachectl restart" In my /etc/apache2/httpd.conf file I turned on php5: LoadModule php5_module libexec/apache2/libphp5.so I also made sure to change the permissions for my admin.conf file with this command in terminal: sudo chmod 644 username.conf This is my /etc/apache2/users/admin.conf: <Directory "/Users/admin/Sites/"> Options Indexes MultiViews AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• help with sendmail configuration to send mail through my gmail account?

  - by pradeepa

  This is the sendmail.ini file what to change now # Example for a user configuration file # Set default values for all following accounts. defaults logfile "\xampp\sendmail\sendmail.log" # Mercury account Mercury host localhost from postmaster@localhost auth off # A freemail service example account gmail tls on tls_certcheck off host smtp.gmail.com from ****@gmail.com auth on user ****@gmail.com password ******* # Set a default account account default : Mercury

  Read the article

• How to access apache behind home router?

  - by Filip

  Hi! I have public IP 89.103.xxx.yyy, then router and home network with 192.168.1.zz My router is set to portforward every 8056 on ip adress 192.168.1.5 (my PC), where apache is running. Apache listen is set to: Listen 127.0.0.1:80 Listen 192.168.1.5:8056 When i try: Listen 89.103.xxx.yyy:8056 I get message "unexpected end of apache" (I'm using easyphp for windows). Added: When i try to access 89.103.xxx.yyy via browser, it's prompting router request for authorization to access router web-settings. And when i try 89.103.xxx.yyy:8056, browser says that connection timed out =(

  Read the article

• Web based operating system

  - by Dee Monteleone

  with a web os. can the browser still be in the device by itself?

  Read the article

• YouTube videos not working

  - by André

  I have a problem with watching YouTube videos. It says: "An error occurred, please try again later". I've tried loading different videos and that's what it says to all the videos I try to watch. I've tried using another browser, clearing cache + cookies etc, but none of that really worked out. My operating system is Windows 7 Home Premium, I use Google Chrome as my browser. And the YouTube videos was able to be watched earlier. I suspect that it has something to do with the PC, since I've got YouTube working on my laptop earlier. Not sure if it still works on my laptop though. Hope I've given enough information for you to help me out with this problem. Feel free to ask if there's anything else you need to know. Hope you can/will help me out. :)

  Read the article

• Active X Control issue on Terminal Server 2003

  - by Saif Khan

  I have a security camera system which can be viewed remotely via a web browser. It works excellent only with IE 6 and up and requires an ActiveX control "ERViewer.ocx". Some users require to view the cameras via Windows Terminal Server, but when they try to open the link to the DVR they get the prompt ti install the ActiveX and then the browser crashes when they try to install it. I logged in as admin and got the same issue. I called the tech support of the DVR but they have no idea, in other words, the usual useless tech support. Here is what I get in the error log Faulting application iexplore.exe, version 7.0.6000.16735, faulting module ERViewer.ocx, version 1.6.0.8, fault address 0x000064d7. I am sure it could be some kinda permission getting an ocx to run in IE. What else can I tweak?

  Read the article

• How do I set up an IP address on a Linux VM running in VM Player so I can access it from my Windows 7 host?

  - by BradyKelly

  I have just installed an Openbravo appliance on my Windows 7 VM Player host. I am now staring at a command prompt that tells me to go to http://localhost to access the ERP system, but I cannot find any browser on the appliance. I am guessing I should rather follow their advice to configure an IP address for the Linux VM and just access that from a Windows browser on my host. How do I go about this? More specifically, How do I choose a local IP address to assign? How do I set things up so that this IP address is visible to my Windows host? Their help says to assign an DNS, to make the server visible to the internet, but internet visibility per se is not needed. How should I interpret or adapt this help for that? Finally to make the IP address available to the Internet, assign some DNS servers to it: $ echo "nameserver IP_DNS1" /etc/resolv.conf $ echo "nameserver IP_DNS2" /etc/resolv.conf

  Read the article

• Mounting GlusterFS share under www-data user

  - by Roman Newaza

  Problem: After directory is auto-mounted, Web Server has no write permissions to it. Question: How to auto-mount GlusterFS endpoint via /etc/fstab so that mount point belongs to www-data after it's mounted? For now, the mount point belongs to www-data, but after mounting it turns to root. # /etc/fstab foo.com:/st /st glusterfs defaults 0 0 Seams like I cannot define user / group as mount options for GlusterFS, at least I don't see it when man glusterfs. Thanks!

  Read the article

• Installation of SQL Server 2008 r2 express - Service accounts

  - by Shimmy

  hello! I am in middle of installing SQL Server 2008 r2 express, where an existing instance has been installed long ago. I need to install a new instance. During the installation I reach a tab where I am supposed to enter accounts for "SQL Server Database Engine" and Browser. The browser is already selected, my question is about the 1st row. What account should I enter? I need to be able to perform SQL queries from SMSS and from my app, thru windows authentication.

  Read the article

• Yahoo Webmail - Garbled Quote Text

  - by baultista

  I've encountered a very strange problem when trying to reply to e-mail via my Yahoo Web Mail from a family member's computer. She received an e-mail from a client who is using Microsoft Outlook. When I receive the message it looks perfectly fine in my browser and I can read it. However, when I try to reply to the e-mail the quoted text looks as such: > #yiv9181642880 p.yiv9181642880msonormal1114, #yiv9181642880 > li.yiv9181642880msonormal1114, #yiv9181642880 > div.yiv9181642880msonormal1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msoacetate1114, #yiv9181642880 > li.yiv9181642880msoacetate1114, #yiv9181642880 > div.yiv9181642880msoacetate1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880emailquote1114, #yiv9181642880 > li.yiv9181642880emailquote1114, #yiv9181642880 > div.yiv9181642880emailquote1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msochpdefault1114, > #yiv9181642880 li.yiv9181642880msochpdefault1114, > #yiv9181642880 div.yiv9181642880msochpdefault1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msonormal53, #yiv9181642880 > li.yiv9181642880msonormal53, #yiv9181642880 > div.yiv9181642880msonormal53 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} It's the strangest thing. It doesn't happen with all e-mails except this particular one. At a glance it almost looks like raw CSS code that's being displayed, but I really can't understand why. So far I have tried the following: Try a different browser, both IE11 and Google Chrome Check the browser encoding settings Check Yahoo Web Mail's encoding/font settings My only other guess is that the client used some weird font or formatting on the e-mail that is throwing the message body out of sync. Unfortunately for my family member, she is a contractor working with a medium-sized company that refuses to provide her with a domain e-mail address, so she is forced to conduct business this way. Simply asking the sender to use a more widely supported font wouldn't be an acceptable solution here. Any thoughts?

  Read the article

• Why won't the floppy mount?

  - by dboarman-FissureStudios

  The 1.44Meg floppy won't mount in my Nautilus file browser. When I try to mount it, it says there is no media in the drive. Yet, I can write to the floppy through the terminal using the 'cp' command. I can enter the command: mount -t ext2 /floppy and it mounts. I have also run a check and the disk itself is 100% clean. So, why can't I get the nautilus browser to open up the floppy? Is there a way to see the actual floppy from the terminal?

  Read the article

• Automate the installation of postfix on Ubuntu

  - by sutch

  My system configuration script does an "apt-get install -y postfix". Unfortunately the script is halted when the postfix installer displays a configuration page. Is there a method to force postfix to use the defaults during installation so that an automated script can continue to the end?

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >