Search Results

Search found 2950 results on 118 pages for 'git submodules'.

Page 18/118 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• How can I push a git repository to a folder over SSH?

  - by Rich

  I have a folder called my-project inside which I've done git init, git commit -a, etc. Now I want to push it to an empty folder at /mnt/foo/bar on a remote server. How can I do this? I did try, based on what I'd read: cd my-project git remote add origin ssh://user@host/mnt/foo/bar/my-project.git git push origin master which didn't seem right (I'd assume source would come before destination) and it failed: fatal: '/mnt/boxee/git/midwinter-physiotherapy.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly I'd like this to work such that I don't have to access the remote host and manually init a git repository every time ... do I have to do that? Am I going down the right route at all? Thanks.

  Read the article

• How do I correctly install dulwich to get hg-git working on Windows?

  - by Joshua Flanagan

  I'm trying to use the hg-git Mercurial extension on Windows (Windows 7 64-bit, to be specific). I have Mercurial and Git installed. I have Python 2.5 (32-bit) installed. I followed the instructions on http://hg-git.github.com/ to install the extension. The initial easy_install failed because it was unable to compile dulwich without Visual Studio 2003. I installed dulwich manually by: git clone git://git.samba.org/jelmer/dulwich.git cd dulwich c:\Python25\python setup.py --pure install Now when I run easy_install hg-git, it succeeds (since the dulwich dependency is satisfied). In my C:\Users\username\Mercurial.ini, I have: [extensions] hgext.bookmarks = hggit = When I type 'hg' at a command prompt, I see: "* failed to import extension hggit: No module named hggit" Looking under my c:\Python25 folder, the only reference to hggit I see is Lib\site-packages\hg_git-0.2.1-py2.5.egg. Is this supposed to be extracted somewhere, or should it work as-is? Since that failed, I attempted the "more involved" instructions from the hg-git page that suggested cloning git://github.com/schacon/hg-git.git and referencing the path in my Mercurial configuration. I cloned the repo, and changed my extensions file to look like: [extensions] hgext.bookmarks = hggit = c:\code\hg-git\hggit Now when I run hg, I see: * failed to import extension hggit from c:\code\hg-git\hggit: No module named dulwich.errors. Ok, so that tells me that it is finding hggit now, because I can see in hg-git\hggit\git_handler.py that it calls from dulwich.errors import HangupException That makes me think dulwich is not installed correctly, or not in the path. Update: From Python command line: import dulwich yields Import Error: No module named dulwich However, under C:\Python25\Lib\site-packages, I do have a dulwich-0.5.0-py2.5.egg folder which appears to be populated. This was created by the steps mentioned above. Is there an additional step I need to take to make it part of the Python "path"?

  Read the article

• It is possible to merge/rebase non direct relationship branches??

  - by raul-mpad

  Hello, As a integration test I would like to join several branches before merging them with my master. All of them diverged from the master and make it's own way. It is a correct merging different branches with no direct-relationship (e.g. parent/child)?? Is there any good practise for rejoining branches?? Thanks in advance, Raul.

  Read the article

• How do I clone over HTTP a repository that has no info/refs?

  - by gbacon

  Given a repository served over HTTP whose owner forgot to chmod +x hooks/post-update, is there a workaround for cloning it? I tried running wget --mirror url, but rather than fetching the subtree only, it tried to mirror the entire site—which I assume happened due to the parent-directory links in the autogenerated index.html resources.

  Read the article

• Useful git commit messages for merged branches

  - by eykanal

  As a follow-up to this question: If I'm working on a team by myself, I can maintain useful commit messages when merging branches by squashing all the commits to a single diff and then merging that diff. That way I can easily see what changes were introduced in the branch, and I have a single summary describing the feature/change/whatever that was accomplished in that branch when browsing the master branch. My question now is, how can I accomplish this when working with a team? In that situation, the branches will be pushed to a remote repository, meaning that I can't squash all the commits in the branch down to a single commit. If the branch is public, can I still have a single useful merge commit in the master branch? (By "useful" I mean that the commit in the master line tells me (1) a useful summary of what was done in the branch and (2) diffs of the same.)

  Read the article

• Help us with our git workflow

  - by Brandon Cordell

  We have a web application that gets deployed to multiple regions around our state. An instance of the application for each region. We maintain a staging and production (master) branch in our repository, but we were wondering what is the best way of maintaining each instances codebase. It's similar at the core, but we have to give each region the ability to make specific requests that may not make it into the core of the application. Right now we have branches for each region, like region_one_staging, and region_one_production. At the rate we're growing we'll have hundreds of branches here in the next few years. Is there a better way to do this?

  Read the article

• Using git (or any version control) regarding migration from one language to another [on hold]

  - by Max Benin

  I'm polishing an old project that i released some years ago, and the main purpose on that, is to arrange some folder structures and port the entire code from actionscript to haxe. All the game features, assets and design will remain the same. I have some doubts regarding versioning the project in this circumstance. Assuming that the only thing that will be drastically changed is the code migration, is it correct maintaining the new project changes on the same repository ? I was thinking in tagging it something like V1.1 or Branch the entire project. But i'm afraid that i'm gonna deviate from the versioning patterns. How can i use this version control issue in the best practice way ? Thanks.

  Read the article

• How should my local git workflow work?

  - by Anonymous -

  At home, I have a server that is running some software (on a LAMP stack, but only accessible internally). I have another machine and a laptop that I both use for developing said software. What is the best workflow for me? Should I have a repository on my local server, create a live branch, staging branch and development branch, then checkout the development branch from my laptop/development PC to work on, commit that back when I'm done, then merge the development branch with the staging branch for testing, before further merging to the live branch? Would I simply checkout the production branch to my /www/var/ on my server? Or am I thinking/going about this all wrong? Thanks.

  Read the article

• Unable to Git-push master to Github

  - by Masi

  This question is related to my problem in understanding rebase, branch and merge, and to the problem How can you commit to your github account as you have a teamMate in your remote list? I found out that other people have had the same problem. The problem seems to be related to /etc/xinet.d/. Problem: unable to push my local branch to my master branch at Github I run git push origin master I get fatal: 'origin' does not appear to be a git repository fatal: The remote end hung up unexpectedly The error message suggests me that the branch 'origin' is not in my local git repository. This way, Git stops connecting to Github. This is strange, since I have not removed the branch 'origin'. My git tree is dev * master ticgit remotes/Math/Math remotes/Math/master remotes/origin/master remotes/Masi/master How can you push your local branch to Github, while you have a teamMate's branch in your local Git? VonC's answer solves the main problem. I put a passphares to my ssh keys. I run $git push github master I get Permission denied (publickey). fatal: The remote end hung up unexpectedly It seems that I need to give the passphrase for Git somehow. How can you make Git to ask passphares?

  Read the article

• Git Diff with Beyond Compare

  - by Avanst

  I have succeeded in getting git to start Beyond Compare 3 as a diff tool however, when I do a diff, the file I am comparing against is not being loaded. Only the latest version of the file is loaded and nothing else, so there is nothing in the right pane of Beyond Compare. I am running git 1.6.3.1 with Cygwin with Beyond Compare 3. I have set up beyond compare as they suggest in the support part of their website with a script like such: #!/bin/sh # diff is called by git with 7 parameters: # path old-file old-hex old-mode new-file new-hex new-mode "path_to_bc3_executable" "$2" "$5" | cat Has anyone else encountered this problem and know a solution to this? Edit: I have followed the suggestions by VonC but I am still having exactly the same problem as before. I am kinda new to Git so perhaps I am not using the diff correctly. For example, I am trying to see the diff on a file with a command like such: git diff main.css Beyond Compare will then open and only display my current main.css in the left pane, there is nothing in the right pane. I would like the see my current main.css in the left pane compared to the HEAD, basically what I have last committed. My git-diff-wrapper.sh looks like this: #!/bin/sh # diff is called by git with 7 parameters: # path old-file old-hex old-mode new-file new-hex new-mode "c:/Program Files/Beyond Compare 3/BCompare.exe" "$2" "$5" | cat My git config looks like this for Diff: [diff] external = c:/cygwin/bin/git-diff-wrapper.sh

  Read the article

• Does git clone work through NTLM proxies?

  - by AndreaG

  I've tried both using export http_proxy=http://[username]:[pwd]@[proxy] and git config --global http.proxy http://[username]:[pwd]@[proxy]. I couldn't make it work. It looks like git uses Basic authentication: Initialized empty Git repository in /home/.../.git/ * Couldn't find host github.com in the .netrc file, using defaults * About to connect() to github.com port 8080 (#0) * Trying 10.... * Connected to github.com (10....) port 8080 (#0) * Proxy auth using Basic with user '...' > GET http://github.com/sunlightlabs/fiftystates.git/info/refs HTTP/1.1 Proxy-Authorization: Basic MD... User-Agent: git/1.6.1.2 Host: github.com Pragma: no-cache Accept: */* Proxy-Connection: Keep-Alive < HTTP/1.1 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to t he Web Proxy filter is denied. ) < Via: 1.1 ... < Proxy-Authenticate: Negotiate < Proxy-Authenticate: Kerberos < Proxy-Authenticate: NTLM < Connection: Keep-Alive < Proxy-Connection: Keep-Alive < Pragma: no-cache < Cache-Control: no-cache < Content-Type: text/html < Content-Length: 4118 * The requested URL returned error: 407 * Closing connection #0 fatal: http://github.com/sunlightlabs/fiftystates.git/info/refs download error - The requested URL returned error: 407 Google search returned mixed and probably not updated results. Somewhere it says that curl is (was?) used under the hood, but its options are (were?) hardwired into code. For example, curl --proxy-ntlm --proxy ...:8080 google.com works, and I'd like to use the same option with git. I need some more definite answers here: has anybody succeed using git through Windows proxies? Which version? Thanks.

  Read the article

• Git Workflow With Capistrano

  - by jerhinesmith

  I'm trying to get my head around a good git workflow using capistrano. I've found a few good articles, but I'm either not grasping completely what they're suggesting (likely) or they're somewhat lacking. Here's kind of what I had in mind so far, but I get caught up when to merge back into the master branch (i.e. before moving to stage? after?) and trying to hook it into capistrano for deployments: Make sure you’re up to date with all the changes made on the remote master branch by other developers git checkout master git pull Create a new branch that pertains to the particular bug you're trying to fix git checkout -b bug-fix-branch Make your changes git status git add . git commit -m "Friendly message about the commit" So, this is usually where I get stuck. At this point, I have a master branch that is healthy and a new bug-fix-branch that contains my (untested -- other than unit tests) changes. If I want to push my changes to stage (through cap staging deploy), do I have to merge my changes back into the master branch (I'd prefer not to since it seems like master should be kept free of untested code)? Do I even deploy from master (or should I be tagging a release first and then modifying my production.rb file to deploy from that tag)? git-deployment seems to address some of these workflow issues, but I can't seem to find out how on earth it actually hooks into cap staging deploy and cap production deploy. Thoughts? I assume there's a likely canonical way to do this, but I either can't find it or I'm too new to git to recognize that I have found it. Help!

  Read the article

• Git from localhost to remotehost with a team of three

  - by Mark McDonnell

  Hi, I'm completely new to Git. I've only just worked out how to use Github in a basic way (e.g. push my local file changes to Github - so I've not done 'pulling' down of content from Github and 'merging' it into my localhost version or anything like that). I had a look over at this existing question - Git: localhost remote development remote production - but I think it may have been a bit advanced for me at this stage as I didn't quite understand the terminology that most of the people were using. What I would like to achieve is to have a local server set-up that my team of developers can all 'push' to/'pull' from etc. And then have that local server upload any updated files automatically to our web server so we could see the updates live in the browser. I'm happy to get a server set-up in the office running Mac OSX Server and then installing Git on it and then getting the devs to write a shell script to push to the remote server but only if it was fairly easy for the devs local git to push to this new local server. I'm not a network engineer so I don't know what would need to be set-up for that to work, I know obviously we could set-up the server to be accessible via a local ip address like 192.168.0.xxx but not sure how that works with pushing to a git repository on that server? Would that literally be something like doing this on my local machine: git remote add MyGitFile git://192.168.0.xxx/MyGitFile.git ? Any ideas or advice you can give to a total Git newbie trying to help his team get a better work flow. Kind regards, Mark

  Read the article

• Git repos over multiple machines - backups and keeping in sync

  - by a-or-b

  I'm new to git so please feel free to RTFM me... I have multiple development sites (none of which can communicate via a network with each other) and am working on a few projects (with a few people) at any one time. What I would ideally have is at each site a centralized repository that can be pulled from but development would occur in our own (personal) repos. Then I would like to be able to sync across the centralized repos (via USB key for example). I want a centralized repo at each location as (1) I'm new to git and do break my (personal) local repo by playing around and (2) some projects get put on hold so I want to be able to free up disk space by deleting them. This is the "backup" part of my question. I was also hoping to be able to use 'git clone --bare' for my centralized repos (and the USB key repos to?) as we don't need the full checkout, just the git benefits. However I can't seem to get a bare repo to work as repo I can push from. I've used 'git remote' to set up an remote origin (similar to http://toolmantim.com/thoughts/setting_up_a_new_remote_git_repository) but I can't get 'git push' to work - it seems I need a checked-out repo. . Does anyone else use this sort of repo/development structure or is there something fundamental about git usage that I'm missing? . A solution that I thought about that might not work - If I had a 'git clone --bare' at each site and then use a git repo on my removable media which has remotes set up for each site then I could ('pull') sync my USB key with each repo. But then can I update the site repo from my USB key? Could I push from USB?

  Read the article

• "Could not resolve host: github.com" error while updating Homebrew after installing git

  - by user975352

  I'm using OS X Lion (10.7.2). I installed Homebrew on my Mac, and I executed the command below. $ brew install git and then: $ brew update error: Could not resolve host: github.com; nodename nor servname provided, or not known while accessing https://github.com/mxcl/homebrew.git/info/refs fatal: HTTP request failed Error: Failed while executing git pull origin refs/heads/master:refs/remotes/origin/master What happened there?

  Read the article

• Correct location of git on Mac OS X

  - by zcreem

  On Mac OS x 10.6.6 I have git installed in /usr/bin/ I wanted to update the got version however the the git installer puts it in /usr/local/git/bin/ I realise I could rearrange to path to point to the local one first but what I do not get is where the /usr/bin version came from. Could it be part of an xcode install and lastly how would I delete correct it. I have looked and looked but find nothing and I didn't install it with ports etc. thanks

  Read the article

• git clone is blank from a Gitosis Served Repository

  - by mykeus

  Everything is working fine with my public keys and repository activity but when one of my team members tries to clone a repository, the clone is blank, example output: bry4n@~/tests$ git clone [email protected]:tg/base.git bry4n@~/tests$ At first, It was giving the typical no read access error. Then i stripped out alot of the junk out of the configuration then he started only getting the output above.

  Read the article

• git is not getting installed on RHEL4

  - by dhaval

  I did yum install git-core and then git and i am getting bash: git: command not found What did i miss in above steps?

  Read the article

• Hudson deploy specific git revision

  - by brad

  I'm using hudson to auto-deploy my Rails app to heroku. In my main build job I pull from a Git repo (hosted using gitosis on the same machine), master branch with the following: URL of repository: /home/git/repositories/my_app.git Name of repository: origin Refspec: +refs/heads/master:refs/remotes/origin/master Branches to build: master Then, assuming all tests pass, I want to kick off a new build that is the deploy to Heroku. I can't however figure out how to get that deploy build to checkout the particular revision that this build was using. I understand there's a parameterized trigger plugin that would allow me to pass this revision number, but I don't know how I can tell hudson to checkout this particular revision on the deploy build. I'm pretty sure this just has to do with my limited knowledge of git, but where in the hudson git config's is there an option to checkout a particular revision? Otherwise, I could have many commits happen whilst a build is happening, and when it kicks off a deploy build, that deploy build would just check out the HEAD of the branch, which may not be the same as the code that was pushed that triggered this build. I don't fully understand why I have a refspec in Hudson, then also specify a branch to build, I thought this was the same thing. Can refspec somehow specify the revision number? How would this be referenced if it was passed through with the parameterized trigger plugin? (I've never used that plugin, but someone else recommended it as a way to pass in vars to a new build, if there's another way I'm all ears)

  Read the article

• Create a Remote Git Repository from an Existing XCode Repository

  - by codeWithoutFear

  Introduction Distributed version control systems (VCS’s), like Git, provide a rich set of features for managing source code.  Many development tools, including XCode, provide built-in support for various VCS’s.  These tools provide simple configuration with limited customization to get you up and running quickly while still providing the safety net of basic version control. I hate losing (and re-doing) work.  I have OCD when it comes to saving and versioning source code.  Save early, save often, and commit to the VCS often.  I also hate merging code.  Smaller and more frequent commits enable me to minimize merge time and effort as well. The work flow I prefer even for personal exploratory projects is: Make small local changes to the codebase to create an incrementally improved (and working) system. Commit these changes to the local repository.  Local repositories are quick to access, function even while offline, and provides the confidence to continue making bold changes to the system.  After all, I can easily recover to a recent working state. Repeat 1 & 2 until the codebase contains “significant” functionality and I have connectivity to the remote repository. Push the accumulated changes to the remote repository.  The smaller the change set, the less likely extensive merging will be required.  Smaller is better, IMHO. The remote repository typically has a greater degree of fault tolerance and active management dedicated to it.  This can be as simple as a network share that is backed up nightly or as complex as dedicated hardware with specialized server-side processing and significant administrative monitoring. XCode’s out-of-the-box Git integration enables steps 1 and 2 above.  Time Machine backups of the local repository add an additional degree of fault tolerance, but do not support collaboration or take advantage of managed infrastructure such as on-premises or cloud-based storage. Creating a Remote Repository These are the steps I use to enable the full workflow identified above.  For simplicity the “remote” repository is created on the local file system.  This location could easily be on a mounted network volume. Create a Test Project My project is called HelloGit and is located at /Users/Don/Dev/HelloGit.  Be sure to commit all outstanding changes.  XCode always leaves a single changed file for me after the project is created and the initial commit is submitted. Clone the Local Repository We want to clone the XCode-created Git repository to the location where the remote repository will reside.  In this case it will be /Users/Don/Dev/RemoteHelloGit. Open the Terminal application. Clone the local repository to the remote repository location: git clone /Users/Don/Dev/HelloGit /Users/Don/Dev/RemoteHelloGit Convert the Remote Repository to a Bare Repository The remote repository only needs to contain the Git database.  It does not need a checked out branch or local files. Go to the remote repository folder: cd /Users/Don/Dev/RemoteHelloGit Indicate the repository is “bare”: git config --bool core.bare true Remove files, leaving the .git folder: rm -R * Remove the “origin” remote: git remote rm origin Configure the Local Repository The local repository should reference the remote repository.  The remote name “origin” is used by convention to indicate the originating repository.  This is set automatically when a repository is cloned.  We will use the “origin” name here to reflect that relationship. Go to the local repository folder: cd /Users/Don/Dev/HelloGit Add the remote: git remote add origin /Users/Don/Dev/RemoteHelloGit Test Connectivity Any changes made to the local Git repository can be pushed to the remote repository subject to the merging rules Git enforces. Create a new local file: date > date.txt /li> Add the new file to the local index: git add date.txt Commit the change to the local repository: git commit -m "New file: date.txt" Push the change to the remote repository: git push origin master Now you can save, commit, and push/pull to your OCD hearts’ content! Code without fear! --Don

  Read the article

• Install Git on my Media Temple (dv) 4.0 server

  - by Chris

  I'm trying to install Git on my Media Temple (dv) 4.0 server. I've followed these instructions: http://wiki.mediatemple.net/w/%28dv%29_4.0:Install_GIT It seems to have "installed", as there are a boat load of files in the following directory: /root/git-2012-06-06 However, when I perform any git command in the server: git: command not found My assumption is that something, somewhere isn't configured properly, but I have no idea where to start. Could anybody lend a hand / offer some pointers? (And if you hadn't guessed, I'm pretty new to all this, so please be kind!) Thanks very much Chris

  Read the article

• Git push write access for deployment denied

  - by Stepchik

  I have strange issue when try git push. Git clone and commit works fine. W access for my_project DENIED to deploy_my_project_ My gitolite.conf repo my_project R = deploy_my_project_111 RW+ = my_name I wonder why git push takes wrong user (deploy_project_111) with read access. This error is float. Twice i had to change rsa key(rsa keys is unchangeble) and restart computer. May be my computer do something wrong.

  Read the article

• Update the remote of a git branch after name changing

  - by Dror

  Consider the following situation. A remote repository has two branches master and b1. In addition it has two clones repo1 and repo2 and both have b1 checked out. At some point, in repo1 the name of b1 was changed. As far as I can tell, the following is the right procedure to change the name of b1: $ git branch b1 b2 # changes the name of b1 to b2 $ git push remote :b1 # delete b1 remotely $ git push --set-upstream origin b2 # create b2 remotely and direct the local branch to track the remote 1 Now, afterwards, in repo2 I face a problem. git pull doesn't pull the changes from the branch (which is now called remotely b2). The error returned is: Your configuration specifies to merge with the ref 'b1' from the remote, but no such ref was fetched. What is the right way to do this? Both the renaming part and the updating in other clones?

  Read the article

• Git and Amazon EC2 public key denied

  - by MrNart

  I had git working before on /var/html/projectfolder and realized it was a security risk so I made a new folder /projects from the root folder and tried to replicate what I did and now it doesnt work. Here is the backlog of what I did for my local machine and EC2 - server Server-EC2 1.I added my public key to the authorized_user file in ~/.ssh folder 2.Create a bare repository git init --bare 3.Change folder permissions to sudo chgrp -R ec2-user * sudo chmod -R g+ws * Local Machine create a local repository with git init touch, add, commit readme file pointed origin master to ec2 via git remote add origin ssh://ec2-user@remote-ip/path/to/folder This is my output: Permission Denied (publickey) fatal: The remote end hung up unexpectedly

  Read the article

• How to setup GIT repo on server with need for working dir (non- bare)

  - by OrangeTux

  I want to have configurate a GIT repo for a website. Multiple users will have a clone of the repo on their local machine and on the end of each day they push their work to the server. I can setup a bare repo, but I want a working dir/non-bare repository. The idea is that the working dir of the repository will the root folder for the website. At the end of each day all changes will be visible directly. But I can't find a way to do this. Initializing the server repo with git init gives the following error when a client is trying to push some files: git push origin master [email protected]'s password: Counting objects: 3, done. Writing objects: 100% (3/3), 227 bytes, done. Total 3 (delta 0), reused 0 (delta 0) remote: error: refusing to update checked out branch: refs/heads/master remote: error: By default, updating the current branch in a non-bare repository remote: error: is denied, because it will make the index and work tree inconsistent remote: error: with what you pushed, and will require 'git reset --hard' to match remote: error: the work tree to HEAD. remote: error: remote: error: You can set 'receive.denyCurrentBranch' configuration variable to remote: error: 'ignore' or 'warn' in the remote repository to allow pushing into remote: error: its current branch; however, this is not recommended unless you remote: error: arranged to update its work tree to match what you pushed in some remote: error: other way. remote: error: remote: error: To squelch this message and still keep the default behaviour, set remote: error: 'receive.denyCurrentBranch' configuration variable to 'refuse'. To ssh://[email protected]/home/orangetux/www/ ! [remote rejected] master -> master (branch is currently checked out) error: failed to push some refs to 'ssh://[email protected]/home/orangetux/www/' So I'm wondering if this the right way to setup a GIT repo for a website? If so, how do I have to do this? If not, what is a better way to setup a GIT repo for the development of a website? EDIT you can't push to a non-bare repository Oke, clear. But whats the way to solve my problem? Create a bare repository on the server and have a clone of this repo on the same server in the htdocs folder? This looks a bit clumsy to me. To see the result of a commit I've to clone the repository each time.

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >