Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 18/1617 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Windows 7 on Laptop: Show 3 power Profiles instead of just 2

    - by josecortesp
    The only thing I miss from Vista on W7 is that, you can click the batery icon and select one of three power profiles without having to open the Energy option Window. Can I archieve this on W7 Without having to install a third party tool? I have tried one, but with so many bugs and problems, but I guess there are maybe one tool out there that works fine. I'm Using W7 Professional x64 Thanks in advance

    Read the article

  • looking for the best power supply-- building computer--- [closed]

    - by fello
    What would be an appropriate power supply and form factor for those specifications below? CPU -Intel Core i7-950 Bloomfield 3.06GH Motherboard -- ASRock X58 Extreme 3 LGA ATX Hard drive-- Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM SATA 3.0Gb/s 3.5" Memory-- Kingston HyperX 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Processor---Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core

    Read the article

  • Sleep uses more power than I expect

    - by Niklas
    When my new Dell laptop with Windows 7 Home Premium and 4GB RAM sleeps (not when it hibernates), it will drain the battery overnight. My old Dell laptop with XP Pro (2 GB RAM) could sleep for days without running out of battery. Is it normal that Windows 7 sleep is this power-hungry or should I troubleshoot my new machine? Edit: I know how to set the different sleep/hibernate settings. That is not what I'm asking.

    Read the article

  • DELL Inspiron N 5050 doesn't Power On until I Plug-in the Charger

    - by hannanessay
    I bought a Dell Inspiron N 5050 last week, and recently discovered a problem with my laptop. It doesn't Power On until and unless I Plug-in the charger. After I plug-in the charger, it boots up fine, and continues to work well after disconnecting the charger. I don't know what the problem is exactly? I was planning to contact Customer Care, but I wanted to know if I could fix it myself. Please help!

    Read the article

  • power management of USB-enclosed hard drives

    - by intuited
    With a typical USB hard drive enclosure, is the full range of drive power management functionality available? In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

    Read the article

  • Networking gampeplay - Sending controller inputs vs. sending game actions

    - by liortal
    I'm reading about techniques for implementing game networking. Some of the resources i've read state that it is a common practice (at least for some games) to send the actual controller input across the network, to be fed into the remote game's loop for processing. This seems a bit odd to me and i'd like to know what are the benefits of using such a method? To me, it seems that controller input is merely a way to gather data to be fed into the game, which in turn determines how to translate these into specific game actions. Why would i want to send the control data and not the game actions themselves?

    Read the article

  • What good Social Networking Site solutions there are? [closed]

    - by ZetsubouWebmaster
    What good and free Social Networking Site solutions there are? I tried many options but most of them are either too complicated, too simple, or just do not work... I tried: Dolphin, DZOIC-Handshakes, elgg, Oxwall, SocialEngine, and some plugins for wp and other CMS. I don't need much, just: groups, chats, forums, profiles, PM, photos, pages, comments, search, statistics. Most of which included in pretty much every CMS out there, but not all.. So, what good solutions there are? Also I don't mind paying some money (I guess no more then $200), but I'd prefer if it was a free open source engine. Of course it should be PHP+MySQL based.

    Read the article

  • Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

    - by ZiGi
    i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

    Read the article

  • Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

    - by ZiGi
    i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

    Read the article

  • Manage Internet connection for a program

    - by michel
    I am using a Windows 7 PC with 2 network cards. One for a public line and one for an internal line behind a proxy. Is there a way or a software program where I can manage which program (Outlook, WM) uses which Internet connection or network card? Using the option of interface metric is not what I am looking for. Someone also suggested me ZoneAlarm, but I dislike this program.

    Read the article

  • Number of Splitters on Coaxial Connection and Cable Internet Quality of Service

    - by Matthew Ruston
    Does running multiple coaxial splitters on a single coaxial cable line effect quality of service for cable internet connections? Suppose there are 2-4 splitters between the cable line coming into a building before the connection to a cable modem, does this negatively effect the latency, throughput, etc of a cable internet connection by any measurable amount? Is there a maximum number of times that a coaxial cable can be split into multiple internet and TV connections before QoS suffers?

    Read the article

  • Curriculum for Introduction to Networking

    - by sul4bh
    Dear all: I have the responsibility of training my juniors about practical aspect of networking (as opposed to the theoretical aspect being taught at our university). The training program will be about 4 days long. What do you suggest I should focus on? What topics should I cover? The students taking part in the training will have almost no concept of networking. I will have to start from the very beginning and focus on the practical aspect. What are your suggestions ?

    Read the article

  • Which open source social networking platform to use?

    - by vrao
    I want to build a highly secure social networking portal. Like other portals, subscriber users should be able to create a topic, discuss topic, share information about them, and have the ability for notifications/alerts. The added feature, I would like to have is to moderate users. Based on the topic of discussion, users will be asked automated questions and their responses will be processed to provide recommendations. I have no knowledge of social networking portal requirements. I will be coding alone and want to have something up and running in about six months. Which is the easiest open source platform that I should use to develop? I know some.net and sql, but I am open to use other platforms. Please give me your recommendations

    Read the article

  • Use linefeed or carriage return in Subversion commit message from the command line

    - by Scott
    I am using Subversion 1.6.6 on Ubuntu 10.04. I would like to insert a carriage return, or linefeed, or newline into my commit message so that when reading the log, the comments are formatted appropriately. It works fine when I use the system editor, or specify a file for the commit comment, but what I really want is to be able to do something like the following: svn ci -m "This is the first line\nThis is the second line" and have the comment presented as: This is the first line This is the second line My example does not work, it produces output: This is the first line\nThis is the second line So, is there a way to do this? If so, how?

    Read the article

  • All internet requests in Windows time out

    - by Brandon
    So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

    Read the article

  • CentOS 6.2 Bridge Setup for KVM

    - by Gaia
    I'm trying to set up bridged networking with KVM on CentOS 6.2 to no avail. There are plenty of docs and tutorials about it, but they all seem to conflict or don't provide info specific enough to my situation. I just don't get it. I access the host via public IP "xxx.xxx.128.58". All other available IPs (/29) should be bridged and made available to the only KVM guest (running a public facing LAMP stack) that will be setup on this machine. The amazingly unhelpful NOC people assigned the extra IPs to eth1. Is this correct? Should br0 bridge to eth0 or eth1? How do I set this up? Here is the relevant info: eth0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BC inet6 addr: fe80::225:90ff:fe68:febc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:763 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:550811 (537.9 KiB) TX bytes:648 (648.0 b) Memory:fb980000-fba00000 eth1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.58 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 inet6 addr: fe80::225:90ff:fe68:febd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1806 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:133166 (130.0 KiB) TX bytes:106070 (103.5 KiB) Memory:fb900000-fb980000 eth1:0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.59 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.60 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:2 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.61 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:3 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.62 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) virbr0 Link encap:Ethernet HWaddr 52:54:00:62:55:68 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=XXXX.domain.com > brctl show bridge name bridge id STP enabled interfaces br0 8000.00259068febc no eth0 virbr0 8000.525400625568 yes virbr0-nic > ls -fl | grep ifcfg -rw-r--r-- 1 root root 198 Jun 7 10:58 ifcfg-eth0 -rw-r--r--. 1 root root 254 Oct 7 2011 ifcfg-lo -rw-r--r-- 1 root root 77 Jun 6 18:51 ifcfg-eth1-range0 -rw-r--r-- 1 root root 168 Jun 6 18:50 ifcfg-eth1 > cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BRIDGE="br0" HWADDR="00:25:90:68:FE:BC" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" IPADDR="yyy.yyy.216.131" NETMASK="255.255.255.128" > cat ifcfg-eth1 DEVICE="eth1" HWADDR="00:25:90:68:FE:BD" NM_CONTROLLED="yes" ONBOOT="yes" BOOTPROTO="static" IPADDR="xxx.xxx.128.58" NETMASK="255.255.255.248" GATEWAY="xxx.xxx.128.57" > cat ifcfg-eth1-range0 IPADDR_START="xxx.xxx.128.59" IPADDR_END="xxx.xxx.128.62" CLONENUM_START="0" Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.128.56 * 255.255.255.248 U 0 0 0 eth1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 1003 0 0 eth1 default xxx.xxx.128.57 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Why did my power supply fry itself?

    - by ULTRA_POROV
    I am in europe. There was a switch on my psu that could switch the voltage between 230v and 130v (not 100% sure). In europe we use 230. I switched the psu to 110 and turned it on. Several sparks and a power failiure resulted, the psu was fried. Can someone explain why this happened. I was assuming that because the system was using 230 and the psu only draws 130 it would be safe cause it's less. I guess i was wrong. Can someone explain me the physics behind this.

    Read the article

  • How low-power can a home server get?

    - by Halik
    I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

    Read the article

  • Laptop touchpad works incorrect when on power supply

    - by Ikke
    My original laptop adapter broke down, so I've baught a new one. It's a no-brand adapter from a dutch internet shop. The power of the new adapter is slightly more than the old adapter, but in my opinion that shouldn't be a problem. The laptop is a Toshiba Sattelite L40-15B. When the old adapter broke down due to short circuit, this laptop was connected. When the adapter is unplugged, the touchpad works correctly and smoothly. But as soon as it is connected, the cursor moves jumpy, and response badly. Does anyone know where this problem comes from, and if there's a solution?

    Read the article

  • New power supply and now HDDs are not recognized

    - by Michael
    So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

    Read the article

  • Can a power loss break an hard disk?

    - by dag729
    Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

    Read the article

  • Dell XPS M1330 - power cable pulled by accident and now it won't turn on

    - by jim
    I have a similar problem to what has been posted on this site about when I plug in my Laptop adapter the green light comes on as expected; but, when I plug it into the laptop it goes out. In my case, I know it's not the adapter because I have 2 and they both experience the same issue. I'm quite certain the problem is a short in the laptop. I was using the laptop today and the power cord was pulled out by accident and now i'm into this predicament. How or what do I check on the laptop to isolate the problem? Thanks!

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >