Search Results

Search found 503 results on 21 pages for 'vincent maverick durano'.

Page 18/21 | < Previous Page | 14 15 16 17 18 19 20 21  | Next Page >

  • Why are two indicator-network versions being worked on?

    - by Daniel Rodrigues
    Some months ago, on the road to Ubuntu Maverick, a new system indicator, network (with connman as a backend), started to be developed. The plan was to get it into UNE and release it with no notifcation area. Unfortunately it didn't make it into the final version. However, continued efforts are still being made to improve it, and I'm getting regular updates. From a blueprint from the last UDS, I read that the plan was to ship no notification area and only indicators. For that, it was defined that nm-applet (backend: NetworkManager) should be ported to the appindicator library. Today I discovered that those efforts are going on and a initial version is available for testing, available from Matt Trudel PPA (Natty only). So, my questions is, to whoever has the necessary info: wouldn't it be easier to join efforts and concentrate the work in just one version (probably NetworkManager backend, as that's the official plan), instead of breaking those efforts apart and hampering both testing and developing? Both indicators are being developed by Canonical engineers, and that really doesn't make much sense. So, any Canonical engineer willing to clarify this?

    Read the article

  • How can I install Insight debugger?

    - by DandyWalker
    Hello. I am following along a book in which Insight debugger is required. I didn't find it on my Maverick. I googled and I found that it's not supported in debian anymore but I really need to install it. I tried to compile the source and it installed but keep telling me that tk is missing whenever i start it. I installed tk with sudo aptitude install tk then tried to run again it's the same. I compiled it one more time and nothing really changes. So please how can I install that ? Update: This is the message i get Tk_Init failed: Can't find a usable tk.tcl in the following directories: /usr/local/share/tk8.4 /usr/local/lib/tk8.4 /usr/lib/tk8.4 /usr/local/library /usr/library /usr/tk8.4.1/library /tk8.4.1/library /usr/local/share/tk8.4/tk.tcl: no event type or button # or keysym no event type or button # or keysym while executing "bind Listbox <MouseWheel> { %W yview scroll [expr {- (%D / 120) * 4}] units }" (file "/usr/local/share/tk8.4/listbox.tcl" line 182) invoked from within "source /usr/local/share/tk8.4/listbox.tcl" (in namespace eval "::" script line 1) invoked from within "namespace eval :: [list source [file join $::tk_library $file.tcl]]" (procedure "SourceLibFile" line 2) invoked from within "SourceLibFile listbox" (in namespace eval "::tk" script line 4) invoked from within "namespace eval ::tk { SourceLibFile button SourceLibFile entry SourceLibFile listbox SourceLibFile menu SourceLibFile panedwindow SourceLibFile ..." invoked from within "if {$::tk_library ne ""} { if {[string equal $tcl_platform(platform) "macintosh"]} { proc ::tk::SourceLibFile {file} { if {[catch { namesp..." (file "/usr/local/share/tk8.4/tk.tcl" line 393) invoked from within "source /usr/local/share/tk8.4/tk.tcl" ("uplevel" body line 1) invoked from within "uplevel #0 [list source $file]" This probably means that tk wasn't installed properly.

    Read the article

  • Cloning (mirroring) laptop display to area of external monitor display

    - by intuited
    I'm using Maverick "10.10" Meercat on a HP Pavilion tx2110. This machine has an NVidia Go6150 graphics card, and sports a 1280x800 display. I have an external monitor which can do 1280x1024 resolution. FWIW I'm using openbox as my window manager; as I understand it this shouldn't be a factor. I'd like to clone the display to the monitor, so that the size of the desktop remains at 1280x800, and there is a horizontal blank area on the external monitor. I.E. I want to avoid having to pan the display of the desktop on either monitor. So the actual resolution of the monitor would be 1280x1024, but the resolution of the section of the monitor where stuff was actually being displayed would be 1280x800. Using the nvidia-settings applet, I'm able to set up the cloned display so that the desktop size is 1280x1024 (the resolution of the external monitor), but can't find a way to instead have the desktop size stay at the resolution of the laptop's built-in display. Is this achievable? Ideally I'd like the external monitor's blank area to be at the top of the screen, i.e. for it to align the display with the bottom of the screen.

    Read the article

  • apt-get does not work with proxy

    - by tommyk
    For a command sudo apt-get update I get following error W: Failed to fetch http://ch.archive.ubuntu.com/ubuntu/dists/maverick-updates/multiverse/binary-i386/Packages.gz 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ) I am running Ubuntu 10.10 installed on Windows XP using VirtualBox. For internet connections I am using proxy server with an authentication. I tried to use gnome-network-proxy tool to set proxy settings system-wide. After that /etc/environment has been updated by http_proxy variable with the format http://my_proxy:port/, there were no authentication data. I checked this with firefox. Browser asked my for login and password and everything was working fine. It was unfortunately not the case for apt-get. I have also tried to do as described here. Unfortunately it does not work. May it be somehow related to the fact that a proxy is in a Windows domain, any ideas ? EDIT: My proxy name is http-proxy. Is '-' a special character here ?

    Read the article

  • How do I transition from WUBI to a native installation?

    - by Sammy Black
    I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

    Read the article

  • apt-get does not work with proxy

    - by tommyk
    For a command sudo apt-get update I get following error W: Failed to fetch http://ch.archive.ubuntu.com/ubuntu/dists/maverick-updates/multiverse/binary-i386/Packages.gz 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ) I am running Ubuntu 10.10 installed on Windows XP using VirtualBox. For internet connections I am using proxy server with an authentication. I tried to use gnome-network-proxy tool to set proxy settings system-wide. After that /etc/environment has been updated by http_proxy variable with the format http://my_proxy:port/, there were no authentication data. I checked this with firefox. Browser asked my for login and password and everything was working fine. It was unfortunately not the case for apt-get. I have also tried to do as described here. Unfortunately it does not work. May it be somehow related to the fact that a proxy is in a Windows domain, any ideas ? EDIT: My proxy name is http-proxy. Is '-' a special character here ?

    Read the article

  • Fail to upgrade from 10.10 to 11.04

    - by Ana Solís
    I was using Natty for a while, but while updating to the new release there was a blackout and it wasn't able to finish and Ubuntu failed to load after that. I thought, no worries I got my files backed up and I still got my 10.10 CD I used to put Ubuntu in my computer in the first place. So I installed it again, with the plan of using the update manager to get myself with the current release... Except I get this error: W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/natty/main/source/Sources.gz 404 Not Found , W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/natty/main/binary-amd64/Packages.gz 404 Not Found , E:Some index files failed to download, they have been ignored, or old ones used instead. My internet connection is just fine, seeing as I'm able to post this, but I don't know what else to do. Tried to download Quantal in another computer and putting it on a DVD (since it won't fit in a CD...) and the stupid thing fails to load it, it skips it over and goes right back to Maverick... (not a faulty disk, it installed Ubuntu just fine in a friends computer...)

    Read the article

  • How do I work around sudo 'segmentation fault' on basic bash commands?

    - by sage
    I am sure the answers are out there, but alas there are too many answers (here and elsewhere) to other questions stopping me from finding them. I just encountered something substantially similar to what is described at the closed SO question, sudo : “segmentation fault” Ubuntu maverick [closed]. My team is using Ubuntu 11.04 on VMWare Workstation 8.0.4. We are doing development using c++, Xenomai, Qt, and Qt Creator. When we simulate our application on the virtual machine, we currently need to launch Qt Creator with sudo. My colleague mentioned today that he has been having issues where his workstation locks up and he needs to restart and that occasionally he has the issue that all sudo bash commands return "segmentation fault". I just ran our application in simulation mode. I was running Qt Creator under sudo and Qt Creator received the signal abort (if I recall). Afterward, every command executed with sudo from sudo qtcreator to sudo ls resulted in the message Segmentation fault. I clicked on the power widget to see if I could log out, but the system shut down straightaway without prompting. My understanding is that we run sudo because of a permissions issue with Xenomai and the VM as currently configured, but my colleague has a workaround for this. I expect that not running Qt Creator under sudo -- something that has always made me nervous -- will help contain this issue, but I find it troubling that this could happen and manifest as it does. Does anyone know what is happening? Any recommendations on how to work around this issue? This is happening often to I am trying tolobby for VM changes to be able to run the process without sudo.

    Read the article

  • Turning laptop into WAP using netgear WNA1100? (stuck at hostapd)

    - by Vivek Sharma
    I have a Netgear WNA1100 usb wifi adapter. I have installed Atheros driver from Forum Details (btw name of the file is ath9k_htc-installer.1.0.1-maverick-fixed.deb). I wish to make a setup like connectify(windows) on ubuntu, so that I can connect my phone wirelessly to my laptop via Netgear WNA1100 (behaving as AP) and eventually use internet via my wired lan. I have installed the above mentioned driver, hostapd and hostap-utils. Following is my hostapd.conf file. ssid=vks interface=wlan1 # The interface name of the card driver=ath9k_htc # The card driver macaddr_acl=0 accept_mac_file=/etc/hostapd.accept deny_mac_file=/etc/hostapd.deny ieee80211x=1 # Use 802.1X authentication auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP When i run sudo hostapd /etc/hostapd/hostapd.conf I get an error invalid/unknown driver 'ath9k_htc # The card driver I think the driver is installed fine, as i can see the blue led blinking on the netgear adapter, which was not blinking earlier. Can someone please guide me how to achieve this setup? I will appreciate an example hostapd.conf file with a simple wpa_psk security setup. Please be detailed and descriptive with commands. How to run and end it. Following is output from lsmod, i have only pasted the entries which had ath and ath related info. Which driver shall i use. Module Size Used by ath9k_htc 42903 0 ath9k_common 2563 1 ath9k_htc ath9k_hw 285176 2 ath9k_htc,ath9k_common ath 13001 2 ath9k_htc,ath9k_hw cfg80211 139811 3 ath9k_htc,mac80211,ath compat 4020 1 cfg80211 led_class 2633 3 ath9k_htc,thinkpad_acpi,sdhci Thanks.

    Read the article

  • Upgrade won't allow second display to go to 1920x1080

    - by Rick
    I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

    Read the article

  • Why do my gvfs mounts not show up under ~/.gvfs?

    - by kynan
    From what I read, when mounting a network share via nautilus or gvfs-mount the mount point should be in ~/.gvfs. This seems not to be the case for me: I tried mounting both an FTP and SMB share via both nautilus and gvfs-mount under both Ubuntu Maverick and Natty and in none of the cases did I see any mount point under ~/.gvfs. I can access the shares just find in nautilus, but I want to have access via the command line, which is why I need a mount point in the file system. Edit: Debugging following James Henstridge's answer and enzotib's comment revealed that on my laptop gvfs-fuse-daemon is running and consequently gvfs mounts show up in ~/.gvfs, whereas on the 2 workstations where ~/.gvfs remained empty gvfs-fuse-daemon was not running. On all 3 machines there are other gvfs processes running: gvfsd, gvfs-afc-volume-monitor, ... On the laptop, mount | fgrep gvfs yields gvfs-fuse-daemon on /home/xxx/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=xxx) That raises the questions: How are shares mounted without gvfs-fuse-daemon running? Is there no mount point created in that case and is every access to the share a gvfs library call? Which daemon is responsible? gvfsd? What's the role of gvfs-fuse-daemon? Does it only create a fuse mount point in ~/.gvfs?

    Read the article

  • Compiling kernal problem

    - by James
    Hi, I have a hp pavilion dm3t with intel HD graphics running ubuntu 10.10 64 bit. I'm trying to compile and install a patched kernel according to this, https://launchpad.net/~kamalmostafa/+archive/linux-kamal-mjgbacklight So I downloaded the tarball from here (linked to from the page above): http://kernel.ubuntu.com/git?p=kamal/ubuntu-maverick.git;a=shortlog;h=refs/heads/mjg-backlight I untar'd it to a directory, entered the directory and did: make defconfig which was successful, so I did: make which seemed to work fine until it gave these errors: ubuntu/ndiswrapper/iw_ndis.c:1966: error: unknown field ‘num_private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1966: warning: initialization makes pointer from integer without a cast ubuntu/ndiswrapper/iw_ndis.c:1967: error: unknown field ‘num_private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: excess elements in struct initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: (near initialization for ‘ndis_handler_def’) ubuntu/ndiswrapper/iw_ndis.c:1970: error: unknown field ‘private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1970: warning: initialization makes integer from pointer without a cast ubuntu/ndiswrapper/iw_ndis.c:1970: error: initializer element is not computable at load time ubuntu/ndiswrapper/iw_ndis.c:1970: error: (near initialization for ‘ndis_handler_def.num_standard’) ubuntu/ndiswrapper/iw_ndis.c:1971: error: unknown field ‘private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1971: warning: initialization from incompatible pointer type make[2]: *** [ubuntu/ndiswrapper/iw_ndis.o] Error 1 make[1]: *** [ubuntu/ndiswrapper] Error 2 make: *** [ubuntu] Error 2 How can I compile and install this kernel successfully? I'm new to this and would appreciate any help.

    Read the article

  • Fn key sticks down

    - by Oli
    Just bought my significant other a shiny new Samsung Q330 13" netbook, stuck an OCZ Agility in it and installed Maverick. Just as a quick aside, this is a devastating combination. Graphics work perfectly and it cold-boots to desktop in about 7 seconds. Very quick. But (common to laptops) I've got a couple of problems. I'll start with the most problematic and start a new thread for the other. Like a lot of laptops, there is a Fn (function) modifier to allow some keys to have another purpose. When I tried to alter the brightness of the screen by tapping Fn+Down, it worked but kept on going until it was as dim as it could go. I tapped Fn+Up and it went to the other extreme. After that the entire keyboard ceases to work properly because the Fn modifier appears to be locked. Additionally, and as a direct side effect, I think, clicking on things doesn't result in a standard result. It's as if control is being held. A reboot is the only thing that seems to fix these problems. This isn't a problem if you don't touch the Fn key but as there are two of them on the keyboard, an accident is going to happen sooner than later, requiring a reboot (and probably some data loss). I don't have a lot of experience with laptops (I prefer my hulking great desktop) so this isn't my area of expertise. I'm open to all suggestions, even disabling the two Fn keys until we can find a better solution.

    Read the article

  • Higher resolutions unavailable with 2.6.38-8 kernel

    - by time-wastrel
    After upgrading to Natty and the 2.6.38-8 kernel I could no longer obtain the 1920x1080 resolution available in Maverick with 2.6.35-22. In fact the boot occasionally hung. However, after selecting the remaining 2.6.35-22 kernel, the high resolution was available. I then made the mistake of completely reinstalling, but could never get the higher resolutions with 2.6.38-8, no matter what I did. e.g. trying the nvidia proprietary driver, creating an xorg.conf. Even from the command line using xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync xrandr --addmode DVI-I-1 1920x1080_60.00 xrandr --output DVI-I-1 --mode 1920x1080_60.00 all I would get would be a blank screen and the monitor reporting no input. (Low resolutions displayed fine with xrandr.) I could actually add the 1920x1080 to the already existing probe-reported resolutions in the pool of available resolutions, but choosing it would give the blank screen. In the end I installed the 2.6.35-22 kernel again. The high resolution is back. For a while there, staying up all night and trying many things, I thought that a new video board or monitor might be needed, but deep down, I knew that they were both OK. My question is - "Is this some bug involving the latest kernel, that will go away, or if this persists in future kernels, is there a way to make sure that I can keep my native resolution?"

    Read the article

  • Sharing an internet connection through the Ethernet port

    - by Bob Cunningham
    I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

    Read the article

  • USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800

    - by poolie
    Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick. When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show: PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) pm_op(): usb_dev_suspend+0x0/0x20 returns -2 PM: Device usb8 failed to suspend async: error -2 PM: Some devices failed to suspend PM: resume of devices complete after 0.430 msecs PM: resume devices took 0.000 seconds PM: Finishing wakeup. Restarting tasks ... done. PM: Syncing filesystems ... I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and lspci shows the physical devices are: 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) Booting with no_console_suspend makes no difference.

    Read the article

  • apt-cacher ng / upgrade fails from client

    - by todayis23
    I'm running apt-cacher ng on an Ubuntu Hardy server and try to upgrade the packages on a Natty client (which was initially a Maverick). I didn't do anything on the server. On the client I tried two setups. I configure APT to use a http-proxy. On the client I did a "apt-get update" which worked fine, but very slowly. In the acng-report.html I see an entry, which seems to be correct. After verifying Install these packages without verification [y/N]? y "apt-get upgrade" failes with the message: Err http://archive.ubuntu.com/ubuntu/ natty-updates/main libnux-0.9-common all 0.9.48-0ubuntu1.1 503 Name or service not known The GUI update manager fails as well with the message, that untrusted packages will be installed. I edit sources.list and add the server in the correct format to all sources. "apt-get update" is very slowly... and I get a lot of errors like this: W: Failed to fetch http://[::ffff:10.10.10.10]:3142/archive.ubuntu.com/ubuntu/dists/natty/main/binary-i386/Packages 403 Forbidden file type or location After that "apt-get upgrade" says: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. What could be wrong? Is it possible to use apt-cacher ng on an older system for upgrading newer systems? Thank you in advance!

    Read the article

  • Custom daemon script: works, but does not run at boot / startup

    - by pearjoint
    this is Ubuntu 10.10 Maverick. I have the following shell script in init.d that I want to run as a "daemon" (background service with start/stop/restart really) at system startup. There is a symlink in rc3.d. I tried 4 and 5 too. (Ideally this would initialize before graphical login happens and before a user logs in.) IMPORTANT: the script works 100% as expected and required when testing this with service MetaLeapDaemon start and service MetaLeapDaemon stop. (This shell script calls a Python program which makes sure the appropriate .pid files are both created at startup and deleted at exit.) So generally it works fine but now my only issue is why it will not be run at any of the run-levels I tried. I know for sure it isn't run because the log file it normally creates does not get created. As you can see (by the lack of any uid:gid args in the start-stop-daemon commands) this would currently run only under root, is this forbidden in a default setup? Here's the script, pretty much your run-off-the-mill daemon script really: #! /bin/sh DAEMON=/opt/metaleap/_core/daemon/MetaLeapDaemon.py NAME=MetaLeapDaemon DESC="MetaLeapDaemon" test -f $DAEMON || exit 0 set -e case "$1" in start) start-stop-daemon --start --pidfile /var/run/$NAME.pid --exec $DAEMON ;; stop) start-stop-daemon --stop --pidfile /var/run/$NAME.pid ;; restart) start-stop-daemon --stop --pidfile /var/run/$NAME.pid sleep 1 start-stop-daemon --start --pidfile /var/run/$NAME.pid --exec $DAEMON ;; *) N=/etc/init.d/$NAME echo "Usage: $N {start|stop|restart}" >&2 exit 1 ;; esac exit 0

    Read the article

  • How do I understand the partition table? (I want to start over.)

    - by Sammy Black
    I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

    Read the article

  • apt-get update stuck on "Waiting for Headers"

    - by crasic
    I'm setting up a Maverick server on a spare PC. The install completes fine and the system boots up into the shell. However, when I try to do a apt-get update , apt hangs on almost every entry with the message 99% [Waiting for headers] sometimes a message of 96 b/s appears on the far right. The actual percent that it claims also varies. Searching around online gave a potential solution by using the option Acquire::http::Pipeline-Depth="0" this somewhat alleviates the problem, i.e. it stalls on every other entry with the same message as above. If you wait it out (the whole update took about 4 hours), the update still fails as a good portion of the hits show a "unable to connect" or similar message, despite the fact that I can ping the server from the pc just fine. The problem is also unrelated to the mirror used since I've tried about a dozen mirrors with no success, I've even tried commenting out everything but the main entry in sources.list and it still refuses to update. The network connection is fine since I can ping and wget (apt won't let me install lynx until I run a successful update) just fine. I've also reinstalled the distro with no luck. The only thing weird about the setup is that the PC is connecting to the internet through my windows laptop with ICS configured properly, but as I've said before, the network connection is fine.

    Read the article

  • Compiz: How can I pin osd-lyrics to the Desktop?

    - by joebuntu
    Hey ya, I have certain applications pinned to my desktop. such as Rainlendar (1), which offers this option in the settings window conky (2), with "own_window_type normal" in my ~/.conkyrc Rhythmbox's Desktop Cover Art plugin (3), a python plugin sticked to the desktop. They all hide nicely below all other Windows. I set Compiz to not minimize them on "show desktop" command using "window rules". I also use [osd-lyrics][1] to display music lyrics. It's default behaviour is to stick always on top, which is irritating sometimes and, in my case, looks rather fugly. (4) See screenshot at: http://i.imgur.com/ie16K.jpg Now how can I tell Compiz to pin the osd-lyrics bar to the desktop below all other windows and not minimize it? I tried all sorts of window rules and exceptions, e.g. using "class=osd-lyrics", "title=osd-lyrics" but the OSD doesn't seem to match any of these. Any ideas? Running: Ubuntu 10.10 Maverick Meerkat, Compiz 0.8.6, osd-lyrics 0.3 from code.google.com/p/osd-lyrics

    Read the article

  • How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

    - by MoLE
    I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

    Read the article

  • how to solve this problem

    - by Surbir
    root@me-desktop:~# sudo apt-get install aircrack-ng Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: aircrack-ng 0 upgraded, 1 newly installed, 0 to remove and 446 not upgraded. 1 not fully installed or removed. Need to get 1,579kB of archives. After this operation, 2,843kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ maverick/universe aircrack-ng i386 1:1.1-1 [1,579kB] Fetched 1,579kB in 1min 9s (22.7kB/s) Selecting previously deselected package aircrack-ng. (Reading database ... 520739 files and directories currently installed.) Unpacking aircrack-ng (from .../aircrack-ng_1%3a1.1-1_i386.deb) ... Processing triggers for man-db ... Setting up linux-image-3.0.1-030001-generic (3.0.1-030001.201108060905) ... Running depmod. update-initramfs: Generating /boot/initrd.img-3.0.1-030001-generic Warning: No support for locale: en_US.utf8 Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/nvidia-common 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic exec: 15: update-grub: not found run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.0.1-030001-generic.postinst line 1010. dpkg: error processing linux-image-3.0.1-030001-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up aircrack-ng (1:1.1-1) ... Errors were encountered while processing: linux-image-3.0.1-030001-generic E: Sub-process /usr/bin/dpkg returned an error code (1) root@me-desktop:~#

    Read the article

  • Tutorial on Using OpenSSL with pthreads

    - by Sadeq Dousti
    OpenSSL documents state that it can safely be used in multi-threaded applications provided that at least two callback functions are set, locking_function and threadid_func.... I've written programs which use OpenSSL API. Moreover, I know how to use pthreads. However, the OpenSSL documents are written in the form of a manual, and I can't see a step-by-step guide on what I have to do when using OpenSSL in a multi-threaded app. Is there a tutorial on using OpenSSL with pthreads? (I searched the web, but no satisfactory result appeared.) PS: I'm working in Debian Lenny & Ubuntu Lucid/Maverick. PS2: OpenSSL includes a sample, but it's far too complicated to start with.

    Read the article

  • Ruby Strange Error

    - by Ell
    Whenever I require a file in ruby or irb I get this error: LoadError: no such file to load -- (insert any filename).rb from <internal:lib/rubygems/custom_require>:29:in `require' from <internal:lib/rubygems/custom_require>:29:in `require' from (irb):1 from /usr/bin/irb1.9.1:12:in `<main>' It happens even if the file exists I am using ruby1.9.1 and to my knowledge, I have not installed rubygems. I am running on Ubuntu 10.10 Maverick Meerkat. Please help, this problem is very annoying! Thanks in advance, ell. EDIT: I forgot to say that no matter where the file is, even if its in the same directory and definately exists I always get this error.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21  | Next Page >