Search Results

Search found 126079 results on 5044 pages for 'windows server 2003'.

Page 18/5044 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Boot.ini on Windows Server 2003 R2

    - by Jason H.
    I have a Windows Server 2003 R2 with 48 GB of RAM; server has been running strong for quite some time. Recently our boot.ini was modified causing issues, most likely by our remote administrators. Now the server is only showing 14 GB of RAM. This has caused major performance issues for our end users. Our remote administrators have stated "we don't change the boot.ini settings(switches)". However, I know for a fact that all of the local administrators have not modified the switches (due to lack of permissions). The real question.. Is it possible to "audit" who has modified the boot.ini? If thats not possible, can the boot.ini be set via startup? Any help would be greatly appreciated. This is an ongoing issue that I would love to resolve.

    Read the article

  • Windows Server 2003 - Give User Full Admin Privileges

    - by APShredder
    I am running Windows Server 2003. There are a couple of user accounts that I would like to promote to Administrator accounts. I've tried several ways to do so, but I am still relatively new to setting up a server. If anyone has any ideas on how to go about promoting these users, I thank you in advance. EDIT: I should probably mention that this a domain controller. I didn't realize that this changed the answer I was looking for. I apologize, like I said before I am new to the world of servers. EDIT #2: I've added the users to the Administrator group like most of the answer recommended, but the users don't seem to have admin rights yet. I think this might be because they are also in the Domain Users group, which I can't seem to be able to remove them from.

    Read the article

  • Pushing new mailbox limits for Exchange 2003 accounts

    - by Dobler
    There is this problem that I have every time I set up an account for a user on Exchange 2003. After I update the Mailbox limit to unlimited in the Exchange tab in the user preferences it does not seem to update right away. I remember reading somewhere that it takes several hours for the change to update in the database. I also remember typing in some terminal command that pushed the new updates immediately. What is that command, and why is it so difficult to find the answer to this problem on Google?

    Read the article

  • Windows 2003 IIS FTP Server Migration w/ User Accounts

    - by Brad
    I'm trying to figure out the best way to migrate an FTP server from old hardware to new hardware. The server is on a domain, but not all the users setup on the server (to use FTP) are domain accounts, some are local to the server. For example, I have users both ways: domain\username machinename\username The new machine name will be different. So I need to copy all the files with permissions in tact from the old server to the new server. Then I need to convert all the user accounts from the old server to the new server. Then I need to change the file permissions so that they are no longer oldserver\username but newserver\username. Can this be accomplished all with CALCS? Is there an easy way that perhaps I'm missing?

    Read the article

  • Multiple Remote Desktop Connection in Windows Server 2003?

    - by Joel Bradley
    My company is transitioning all user PC's to Windows 7 64-Bit in anticipation of the 2014 cutoff for Windows XP support. So far everything has been going great except for one specific piece of software that will not run in Windows 7. The current plan is to give everyone a cheap secondary PC to run this software but I feel that's a little much for software that's not even used all the time, although it is essential. I've suggested we install virtual machines but the company does not want to pay for the XP licences. I have access to a copy of Windows Server 2003 that is no longer being used and I was wondering if it was possible to create a remote desktop server. I know it can be done on a one-to-one basis, but this is a 15 person helpdesk. I'd like to be able to support multiple remote dekstop sessions, each with their own logins and dekstops. Is this possible? Are there any other alternatives to my issue? FYI, I've been told that XP mode is only free for consumers. There are costs when used in a corporate environment.

    Read the article

  • How to make Exchange 2003 non-authoritive

    - by Romski
    Background We are a small company with an internally hosted Exchange 2003. It receives email for 2 domains (the company was renamed a few years back). For the sake of argument, the domains are: oldname.com newname.com We have moved newname.com to a hosted exchange service, and our DNS record is correctly routing emails. Our internal server still receives email for oldname.com, although we have asked our hosting company to accept emails for that domain. Problem My problem is that emails generated internally from monitoring software, printer, etc. are being caught by our (defunct) internal server and being delivered to the old mailboxes. I believe that what is happening is that our internal exchange server considers itself to be the authoritive server for newname.com. I think it must be looking in active directory for a mailbox and delivering it internally without ever going outside. Attempt to fix I started to follow the article here: http://support.microsoft.com/kb/321721. I removed the SMTP recipient policy for newname.com, and added a dummy address and made it primary. I also answered yes for updating the associated emails. I then restarted the Microsoft Exchange Routing System and SMTP, but emails are still being routed internally. Is there a way to force the exchange server to route all emails for the domain newname.com to the new hosted service?

    Read the article

  • HTTP downloads slow - FTP of same file very fast - Windows 2003

    - by Paul Hinett
    I am having some issues with download speeds on my site via http, i am averaging around 70kbps downloading a file that is around 70mb. But if i connect to my server via FTP and download the same file on the same computer / connection i am averaging about 300+kbps. I know my server has alot of connections at any one time, probably around 400 connections. My server has a 1gbps connection to the internet so there is plenty of bandwidth available, as proven with the FTP. I have no throttling of any kind enabled in IIS. If interested there is a test file here you can download to check the speed: http://filesd.house-mixes.com/test.zip I am based in the UK and the server is in Washington, USA if that makes any difference. Paul

    Read the article

  • Should I upgrade Exchange 2003 or just upgrade the hardware?

    - by JohnyD
    My organization currently has a 4 y/o Exchange 2003 email server (32-bit, Intel Pentium D @ 3GHz, 3GB RAM). It's run very well over the past 4 years but it is time to upgrade its hardware. This server would handle email for approximately 30 clients, a few OWA users with iPhones. My (somewhat ambiguous) question is, when I receive the new hardware should I build out a new Exchange 2003 deployment or should I look at Exchange 2007 / 2010? I've heard that Exchange 2010 requires Sharepoint 2010 (which I am currently not running). Are there benefits that a small-medium sized business can or can't do without? Am I making a horrible mistake staying with antiquated software? Other details: Exchange 2003 (v6.5 + SP2) single front-end server All opinions and thoughts are very much appreciated.

    Read the article

  • winexit.scr help for windows server 2003

    - by Kabir Rao
    I am trying to implement winexit.scr in a windows terminal server. I want force logoff all "domain\domain users" from this server after 10 minutes through this. All these users along with domain admins login to this terminal server via Remote Desktop. I want to force logoff only for "domain\domain users" not for administrators and domain admin. I have tried the solutions provided in different sites..but it's logoff administrators also. Please help..thanks upfront.

    Read the article

  • Windows Server 2003 (w/Exchange) move to new machine

    - by James Booker
    I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

    Read the article

  • SBS 2003 CEICW - Multiple IP's causing error

    - by mushmush
    two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

    Read the article

  • 8 Backup Tools Explained for Windows 7 and 8

    - by Chris Hoffman
    Backups on Windows can be confusing. Whether you’re using Windows 7 or 8, you have quite a few integrated backup tools to think about. Windows 8 made quite a few changes, too. You can also use third-party backup software, whether you want to back up to an external drive or back up your files to online storage. We won’t cover third-party tools here — just the ones built into Windows. Backup and Restore on Windows 7 Windows 7 has its own Backup and Restore feature that lets you create backups manually or on a schedule. You’ll find it under Backup and Restore in the Control Panel. The original version of Windows 8 still contained this tool, and named it Windows 7 File Recovery. This allowed former Windows 7 users to restore files from those old Windows 7 backups or keep using the familiar backup tool for a little while. Windows 7 File Recovery was removed in Windows 8.1. System Restore System Restore on both Windows 7 and 8 functions as a sort of automatic system backup feature. It creates backup copies of important system and program files on a schedule or when you perform certain tasks, such as installing a hardware driver. If system files become corrupted or your computer’s software becomes unstable, you can use System Restore to restore your system and program files from a System Restore point. This isn’t a way to back up your personal files. It’s more of a troubleshooting feature that uses backups to restore your system to its previous working state. Previous Versions on Windows 7 Windows 7′s Previous Versions feature allows you to restore older versions of files — or deleted files. These files can come from backups created with Windows 7′s Backup and Restore feature, but they can also come from System Restore points. When Windows 7 creates a System Restore point, it will sometimes contain your personal files. Previous Versions allows you to extract these personal files from restore points. This only applies to Windows 7. On Windows 8, System Restore won’t create backup copies of your personal files. The Previous Versions feature was removed on Windows 8. File History Windows 8 replaced Windows 7′s backup tools with File History, although this feature isn’t enabled by default. File History is designed to be a simple, easy way to create backups of your data files on an external drive or network location. File History replaces both Windows 7′s Backup and Previous Versions features. Windows System Restore won’t create copies of personal files on Windows 8. This means you can’t actually recover older versions of files until you enable File History yourself — it isn’t enabled by default. System Image Backups Windows also allows you to create system image backups. These are backup images of your entire operating system, including your system files, installed programs, and personal files. This feature was included in both Windows 7 and Windows 8, but it was hidden in the preview versions of Windows 8.1. After many user complaints, it was restored and is still available in the final version of Windows 8.1 — click System Image Backup on the File History Control Panel. Storage Space Mirroring Windows 8′s Storage Spaces feature allows you to set up RAID-like features in software. For example, you can use Storage Space to set up two hard disks of the same size in a mirroring configuration. They’ll appear as a single drive in Windows. When you write to this virtual drive, the files will be saved to both physical drives. If one drive fails, your files will still be available on the other drive. This isn’t a good long-term backup solution, but it is a way of ensuring you won’t lose important files if a single drive fails. Microsoft Account Settings Backup Windows 8 and 8.1 allow you to back up a variety of system settings — including personalization, desktop, and input settings. If you’re signing in with a Microsoft account, OneDrive settings backup is enabled automatically. This feature can be controlled under OneDrive > Sync settings in the PC settings app. This feature only backs up a few settings. It’s really more of a way to sync settings between devices. OneDrive Cloud Storage Microsoft hasn’t been talking much about File History since Windows 8 was released. That’s because they want people to use OneDrive instead. OneDrive — formerly known as SkyDrive — was added to the Windows desktop in Windows 8.1. Save your files here and they’ll be stored online tied to your Microsoft account. You can then sign in on any other computer, smartphone, tablet, or even via the web and access your files. Microsoft wants typical PC users “backing up” their files with OneDrive so they’ll be available on any device. You don’t have to worry about all these features. Just choose a backup strategy to ensure your files are safe if your computer’s hard disk fails you. Whether it’s an integrated backup tool or a third-party backup application, be sure to back up your files.

    Read the article

  • Slow wifi from Windows Server 2003 virtualized in XenServer

    - by John Clayton
    I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks! Update: The issue has been further narrowed down to Windows Server 2003, which Windows Home Server is based on, running in XenServer with the XenServer tools installed.

    Read the article

  • How to stop DW20.exe running on Win 2003 Server (usual solutions already tried)

    - by Laurence
    Periodically my ASP.NET application crashes (usually because memory consumption exceeds maximum allowed by application pool) and DW20.exe starts up. This is a big problem because it uses huge amounts of memory and CPU for minutes at a time. I want to know how to stop DW20.exe from running. Please note, I have already tried these often mentioned solutions: Disabling error reporting in Control Panel System Advanced Error Reporting Disabling the Error Reporting Service Modifying the registry as in http://support.microsoft.com/kb/841477 (however I might have done this wrong - this doc says "add a DWReportee value of 1" - what I did was add a DWORD entry with hexadecimal value of 1 - is this right? Also only 2 of the 4 keys were present, so I only modified these, e.g. there was no HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\PCHealth key at all) So, zero points for suggesting any of the above (unless you can see I have modified the registry incorrectly) ! Also zero points for suggesting I resolve whatever is causing the application crashes :) - I am figuring this out, I just want something in the mean time to stop DW20.exe eating up all the server resources. By the way, this is a Windows 2003 SP1 server, with IIS 6 and SQL 2005 installed. There is no MS Office. Thx

    Read the article

  • Exchange 2003: Fresh install, couple noob questions.

    - by Eli
    Hi All, Thanks for reading! I have a small network set up for a local office here, and have a fresh install of Exchange 2003 on our sole-server PDC. The network uses one domain, call it ourdomain.net, which is DNSed locally, but not DNSed for the actual domain, so ourdomain.net works from within the network, but from outside, it's just pointed to some domain parking. I have a completely different domain, call it emaildomain.com, which is currently setup for our website and email, which is hosted with a standard hosting company. We've been using a combination of Thunderbird and Outlook (with local .pst files) for email. I've been asked to setup Exchange to work with our email, but am not familiar with it. The install seems to have gone just fine. The question is: How do I get email from a domain outside our network to work with the exchange server? Do I need to move the email for that domain to point to our local server (I so hope not!), or can I just set exchange so somehow slurp mail from the existing mailboxes on our host for that domain's mail? Or are there better ideas I don't know to ask for? Any help very appreciated - thanks!

    Read the article

  • .net Framework won't install on Server 2003 SP2 x64

    - by Yvan JANSSENS
    Hi, When I install the .net Framework 3.5 SP1 on my rental VPS, I get the message that setup has failed. It's a Server 2003 VPS w/ SP2 installed (64-bit). The .net Framework v 2.0 installed correctly. How do I fix this? This is the installation log: [03/10/10,07:44:46] Microsoft .NET Framework 2.0a x64: [2] Failed to fetch setup file in CBaseComponent::PreInstall() [03/10/10,07:44:47] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467260. [03/10/10,07:44:48] setup.exe: [2] CSetupManager::RunInstallPhase() - Call to Pre/Install/Post for InstallComponents failed [03/10/10,07:44:49] setup.exe: [2] CSetupManager::RunInstallPhaseAndCheckResults() - RunInstallPhase() returned a NULL piActionResults [03/10/10,07:44:49] setup.exe: [2] CSetupManager::RunInstallFromList() - RunInstallPhaseAndCheckResults failed [2] [03/10/10,07:44:51] setup.exe: [2] ISetupManager::RunInstallLists(IP_PREINSTALL failed in ISetupManager::RunInstallFromThread() [03/10/10,07:44:52] setup.exe: [2] ISetupManager::RunInstallFromThread() failed in ISetupManager::RunInstall() [03/10/10,07:44:53] setup.exe: [2] CSetupManager::Run() - Call to RunInstall() failed [03/10/10,07:44:59] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0a x64 is not installed. [03/10/10,07:45:00] WapUI: [2] DepCheck indicates XPSEPSC x64 Installer was not attempted to be installed. [03/10/10,07:45:02] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 SP2 x64 was not attempted to be installed. [03/10/10,07:45:02] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.5 (x64) 'package' was not attempted to be installed. [03/11/10,14:19:23] Microsoft .NET Framework 3.0 SP2 x64: [2] Error: Installation failed for component Microsoft .NET Framework 3.0 SP2 x64. MSI returned error code 1604 [03/11/10,14:26:14] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 SP2 x64 is not installed. Thanks!! Yvan

    Read the article

  • Ionic Isapi Rewrite error on IIS6, Windows 2003 Server

    - by EsiX
    First of all my setup is a VPS running Windows 2003 Server with multiple domains on it IIS 6, Plesk IsapiRewrite4.ini RewriteLogLevel 3 RewriteCond %{HTTP_HOST} ^mydomain.com$ RewriteRule ^/(.*)$ http://www.mydomain.com/$1 [R] This is one of their basic examples. Ionic is installed and setup proper because if I use another rule (a simpler one ... like the one following) it works instant # IsapiRewrite4.ini # RewriteLogLevel 3 # # This ini file illustrates the use of a redirect rule. # Any incoming URL that starts with an uppercase W # will be redirected to the specified server. RewriteRule ^/(W.*)$ http://server.dyndns.org:7070/$1 [R] This one works in the TestDriver tool and none of them gives any error or warnings in TestParse tool, but it doesn't do a thing on the webserver... The fact that one rule works means that the isapi module works. I am using the last version. RedirectRule http://mydomain.com/someplace/somefile.html http://www.mydomain.com/howto/someplace/anotherfile.html [I,L] Both examples were taken from http://iirf.codeplex.com/Wiki/View.aspx?title=Redirection&referringTitle=Home So my IsapiRewrite4.ini needs to do this two tasks: auto transform and redirection for a number of urls. Can you help out.. I really don't know what I'm doing wrong.

    Read the article

  • Public DNS redirect subdomain to Windows Server 2003 DNS

    - by user125248
    I'm a programmer by trade but often dabble in sysadmin tasks and responsibilities. I have recently been tasked with setting up a Windows Server 2003 networking environment for a small business with multiple branches. The business already has a domain name they use to host a website at www.example.com. Currently the DNS nameservers are at Zerigo and I would very much like it to remain that way (as they specialize in just providing DNS services and they do this very well). We also have a bunch of other subdomains we use to conviniently connect to the various branches that have static IPs assigned from ISPs, so we're able to connect easily to branch1.example.com. Is it possible to 'redirect' all intranet.example.com DNS requests to a Windows box? I've been doing a little reading and I see there are NS records that might be able to do this, and the Windows DNS server could then perform all of the lookups for that subdomain, say, server1.intranet.example.com or client5.intranet.example.com. This would seem better to me, than registering a new domain name for the organisation, as keeping a single domain name makes more organizational sense.

    Read the article

  • Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

    - by Jeff Willener
    I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

    Read the article

  • How to stop DW20.exe running on Win 2003 Server

    - by Laurence
    Periodically my ASP.NET application crashes (usually because memory consumption exceeds maximum allowed by application pool) and DW20.exe starts up. This is a big problem because it uses huge amounts of memory and CPU for minutes at a time. I want to know how to stop DW20.exe from running. Please note, I have already tried these often mentioned solutions: Disabling error reporting in Control Panel System Advanced Error Reporting Disabling the Error Reporting Service Modifying the registry as in http://support.microsoft.com/kb/841477 (however I might have done this wrong - this doc says "add a DWReportee value of 1" - what I did was add a DWORD entry with hexadecimal value of 1 - is this right? Also only 2 of the 4 keys were present, so I only modified these, e.g. there was no HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\PCHealth key at all) So, zero points for suggesting any of the above (unless you can see I have modified the registry incorrectly)! Also zero points for suggesting I resolve whatever is causing the application crashes :) - I am figuring this out, I just want something in the mean time to stop DW20.exe eating up all the server resources. By the way, this is a Windows 2003 SP1 server, with IIS 6 and SQL 2005 installed. There is no MS Office.

    Read the article

  • Exchange 2003 ActiveSync problem

    - by colemanm
    We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

    Read the article

  • VMware Data Recovery error -3960 and Event ID 8193 on Windows Server 2003

    - by flooooo
    I've been trying to solve this problem since a few days now without any success. What I'm trying is to make a backup of a virtual machine running Windows Server 2003 SP 2 using VMware Data Recovery 2.0.0.1861. When starting the backup task it tries to make a snapshot of the virtual machine using VSS which fails with error: Event Type: Error Event Source: VSS Event Category: None Event ID: 8193 Date: 05.06.2012 Time: 12:12:01 User: N/A Computer: LEGOLAS Description: Volume Shadow Copy Service error: Unexpected error calling routine RegSaveKeyExW. hr = 0x800703f8. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 20 43 6f 64 65 3a 20 - Code: 0008: 57 52 54 52 45 47 52 43 WRTREGRC 0010: 30 30 30 30 30 33 39 36 00000396 0018: 2d 20 43 61 6c 6c 3a 20 - Call: 0020: 57 52 54 52 45 47 52 43 WRTREGRC 0028: 30 30 30 30 30 33 31 38 00000318 0030: 2d 20 50 49 44 3a 20 20 - PID: 0038: 30 30 30 30 36 34 38 38 00006488 0040: 2d 20 54 49 44 3a 20 20 - TID: 0048: 30 30 30 30 34 33 38 34 00004384 0050: 2d 20 43 4d 44 3a 20 20 - CMD: 0058: 43 3a 5c 57 49 4e 44 4f C:\WINDO 0060: 57 53 5c 53 79 73 74 65 WS\Syste 0068: 6d 33 32 5c 76 73 73 76 m32\vssv 0070: 63 2e 65 78 65 20 20 20 c.exe 0078: 2d 20 55 73 65 72 3a 20 - User: 0080: 4e 54 20 41 55 54 48 4f NT AUTHO 0088: 52 49 54 59 5c 53 59 53 RITY\SYS 0090: 54 45 4d 20 20 20 20 20 TEM 0098: 2d 20 53 69 64 3a 20 20 - Sid: 00a0: 53 2d 31 2d 35 2d 31 38 S-1-5-18 This machine was converted p2v. I have no idea where to search for the problem and what to do. Google showed a few result but none of them were useful for me. Please help me. If you need further information I'll tell you - just ask!

    Read the article

  • Windows Server 2003 DC hangs after network drivers update

    - by tcv
    Earlier today, we attempted to update the Broadcom BCM5716C network drivers on a Windows Server 2003. (Dell PowerEdge T310, FWIW). Since then we have not been able to boot the server in any normal mode. Safe Mode works. Safe Mode with Networking and regular bootups hang at "Applying Network Settings." I haven't tried Last Known Good Configuration nor have I tried Directory Services Restore Mode. I should also mention that the longest I've allowed "Applying Network Settings" was perhaps 30 minutes. I spoke to Dell since the server is under a basic warranty. They sent me the original Broadcom drivers. The trouble seems to be, however, that since I can only boot in Safe Mode, I can't install the application package as given. In safe mode, I receive the error: "The system administrator has set policies to prohibit this installation." I can install the drivers independently, but that doesn't allow the NICs to work. The most I've been able to get are Code 10 errors on each NIC. I plan to get back to the site tomorrow to attempt installation of a different NIC. I'm wondering what else I can try.

    Read the article

  • Sluggish Windows SBS 2003

    - by TomWilsonFL
    One of my customers has a Windows 2003 Small Business Server which at this point is basically the DC, DNS, Fileserver and Symantec Protection Manager. I have disabled Exchange because I moved their mail to Google Apps. The server is extremely sluggish when doing anything. It is most noticeable when a dialog box is open (say the System properties), and you try to change tabs. This is usually instant, but on this machine can take 3-5 seconds. What additional services / packages can I uninstall from this machine knowing that it is only performing the above roles? Will removing the "Small Business Server" package in Add / Remove Programs get rid of a few unnecessary things? Any other thoughts? P.S. I know Symantec Endpoint and the Protection Manager are hogs, but I have nothing to replace the solution with at the moment. Thanks, Tom UPDATE: I looked over the different performance metrics, but nothing stood out as a problem. One of my friends mentioned Symantec's log and temp files can get quite huge and slow things down, so I ran CCleaner on the machine and found close to 3 GB of Symantec "stuff." Removed that and now the machine is MUCH better. I am still unsure why the data just sitting there would cause such a slowdown. The drive is not even near full. The only thing I can imagine is that Symantec must have to run through this stuff now and then.

    Read the article

  • Install IIS on Server 2003 unattended via PowerShell as a service user (no terminal session)

    - by maik
    I've been racking my brain with this for a bit and figured I would ask here to see if anyone could enlighten me. As the title says, I'm trying to install the IIS role on Server 2003 using an unattended install method launched via a service. We're using RightScale and most of what we want to accomplish is pretty straightforward. I created an unattend file for use with sysocmgr.exe: [Components] iis_common = ON iis_www = ON iis_www_vdir_scripts = ON iis_inetmgr = ON fp_extensions = ON iis_ftp = ON And I invoke it like so: sysocmgr.exe /i:%windir%\inf\sysoc.inf /u:C:\path\to\iis-unattend.txt /r /x /q If I run that from a command prompt while logged in as Administrator it works just fine, but if it runs via RightScript (the RightScale user on the server, which is a local admin) it fails somewhere in the middle and the logs I get are rather unhelpful. The thing is I can do this same thing with the SNMP Client (which is a Windows component, not a server role) and it works with no problems while run via the script service user. My best guess is that sysocmgr.exe is expecting a GUI element to be there during the role installation and since the service user has no terminal session it coughs and dies. That's just a wild stab in the dark.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >